Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechani...Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechanism underlying the synergistic reaction remains a critical issue.This study introduces a photothermal synergistic system for the removal of ethyl acetate(EA)by synthesizing Cu-doped OMS-2(denoted as Cu-OMS-2).Under ultraviolet-visible(UV–Vis)irradiation in a flow system,the Cu-OMS-2 catalyst exhibited significantly enhanced performance in the EA degradation process,nearly doubling the effectiveness of pure OMS-2,and increasing carbon dioxide yield by 20%.This exceptional performance is attributed to the synergistic effect of increased oxygen vacancies(OV)at OMS-2 active sites and Cu doping,as confirmed by H2-TPR,O_(2)-TPD,and CO consump-tion measurements.This study clarifies the catalytic mechanism of light-assisted thermocatalysis and offers a novel strategy for designing photothermal catalysts with homogeneous Cu-doped nanorods for VOC removal.展开更多
Ship operations are crucial to global trade,and their decarbonization is essential to mitigate climate change.This study evaluates the economic viability of existing and emerging decarbonization technologies in mariti...Ship operations are crucial to global trade,and their decarbonization is essential to mitigate climate change.This study evaluates the economic viability of existing and emerging decarbonization technologies in maritime shipping using the levelized cost of energy methodology.It includes a detailed comparative analysis based on essential criteria and sensitivity assessments to highlight the economic impacts of technological advancements.Key factors influencing total costs include fuel costs,carbon pricing,and energy demands for carbon capture.The findings reveal that methanol is more cost-effective than heavy fuel oil(HFO)when priced below 3000 CNY/t,assuming HFO costs 4400 CNY/t.Additionally,methanol with post-combustion carbon capture is less expensive than pre-combustion carbon capture.When carbon prices rise above 480 CNY/t,carbon capture technologies prove more economical than purchasing carbon emission allowances for HFO and liquefied natural gas.Enhanc-ing the use of exhaust gas waste heat is recommended for cost savings.Post-combustion carbon capture also shows greater efficiency,requiring about 1.1 GJ/t less energy than pre-combustion methods,leading to lower overall costs.Future research should focus on market mechanisms to stabilize fuel prices and develop less energy-intensive carbon capture technologies.This study offers critical insights into effective decarbonization strategies for advancing global maritime trade in the present and future.展开更多
The reasonable employment of cocatalyst in photocatalysis can effectively promote the photocatalytic H_(2)production activity.In this study,carbon hollow spheres(C),as a good conductive nonmetallic material,have been ...The reasonable employment of cocatalyst in photocatalysis can effectively promote the photocatalytic H_(2)production activity.In this study,carbon hollow spheres(C),as a good conductive nonmetallic material,have been utilized as a novel cocatalyst and a matrix for loading the Cu-doped-TiO_(2)nanoparticles by a successive hydrother-mal method and metal molten salt method.The Cu-doped-TiO_(2)nanoparticles were tightly anchored on the surface of carbon hollow sphere to form a zero-dimensional/three dimensional(0D/3D)Cu-doped-TiO2/C heterojunction.The optimal Cu-doped-TiO_(2)/C heterojunction demon-strated greatly enhanced photocatalytic H_(2) generation activity(14.4 mmol·g^(-1)·h^(-1))compared with TiO_(2)(0.33 mmol·g^(-1)·h^(-1))and TiO_(2)/C(0.7 mmol·g^(-1)·h^(-1)).The performance improvement was mainly due to the syner-gistic effect of carbon hollow sphere cocatalyst and Cu-doping,the Cu-doping in TiO_(2)nanoparticles can minimize charge recombination and enhance the available photoex-cited electrons,while the 3D carbon hollow spheres can act as electron traps to accelerate the charge separation and offer abundant active sites for solar water splitting reaction.展开更多
Two anaerobic ammonia oxidation(anammox)systems,one with adding nano-scale zerovalent iron modified biochar(nZVI@BC)and the other with adding biochar,were constructed to explore the feasibility of nZVI@BC for enhancin...Two anaerobic ammonia oxidation(anammox)systems,one with adding nano-scale zerovalent iron modified biochar(nZVI@BC)and the other with adding biochar,were constructed to explore the feasibility of nZVI@BC for enhancing the resistance of low-nitrogen anammox processes to low temperatures.The results showed that the average nitrogen removal efficiency with nZVI@BC addition at lowtemperatureswas maintained at about 80%,while that with biochar addition gradually decreased to 69.49%.The heme-c content of biomass with nZVI@BC was significantly higher by 36.60%-91.45%.Additional,nZVI@BC addition resulted in more extracellular polymeric substances,better biomass granulation,and a higher abundance of anammox bacteria.In particularly,anammox genes hzsA/B/C,hzo and hdh played a pivotal role in maintaining nitrogen removal performance at 15℃.These findings suggest that nZVI@BC has the potential to enhance the resistance of low-nitrogen anammox processes to low temperatures,making it a valuable approach for practical applications in low-nitrogen and low-temperature wastewater treatment.展开更多
Lithium-ion batteries(LIBs)face significant limitations in low-temperature environments,with the slow interfacial de-solvation process and the hindered Li+transport through the interphase layer emerging as key obstacl...Lithium-ion batteries(LIBs)face significant limitations in low-temperature environments,with the slow interfacial de-solvation process and the hindered Li+transport through the interphase layer emerging as key obstacles beyond the issue of ionic conductivity.This investigation unveils a novel formulation that constructs an anion-rich solvation sheath within strong solvents,effectively addressing all three of these challenges to bolster low-temperature performance.The developed electrolyte,characterized by an enhanced concentration of contact ion pairs(CIPs)and aggregates(AGGs),facilitates the formation of an inorganic-rich interphase layer on the anode and cathode particles.This promotes de-solvation at low temperatures and stabilizes the electrode-electrolyte interphase.Full cells composed of LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622)and graphite,when equipped with this electrolyte,showcase remarkable cycle stability and capacity retention,with 93.3% retention after 500 cycles at room temperature(RT)and 95.5%after 120 cycles at -20℃.This study validates the utility of the anion-rich solvation sheath in strong solvents as a strategy for the development of low-temperature electrolytes.展开更多
Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fif...Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fifth-generation communication equipment.In this study,multistage microcellular waterborne polyurethane(WPU)composites were constructed via gradient induction,layer-by-layer casting,and supercritical carbon dioxide foaming.The gradient-structured WPU/ironcobalt loaded reduced graphene oxide(FeCo@rGO)foam serves as an impedance-matched absorption layer,while the highly conductive WPU/silver loaded glass microspheres(Ag@GM)layer is employed as a reflection layer.Thanks to the incorporation of an asymmetric structure,as well as the introduction of gradient and porous configurations,the composite foam demonstrates excellent conductivity,outstanding EMI SE(74.9 dB),and minimal reflection characteristics(35.28%)in 8.2-12.4 GHz,implying that more than 99.99999%of electromagnetic(EM)waves were blocked and only 35.28%were reflected to the external environment.Interestingly,the reflectivity of the composite foam is reduced to 0.41%at 10.88 GHz due to the resonance for incident and reflected EM waves.Beyond that,the composite foam is characterized by low density(0.47 g/cm^(3))and great stability of EMI shielding properties.This work offers a viable approach for craft-ing lightweight,highly shielding,and minimally reflective EMI shielding composites.展开更多
Low temperature(LT)in spring has become one of the principal abiotic stresses that restrict the growth and development of wheat.Diverse analyses were performed to investigate the mechanism underlying the response of w...Low temperature(LT)in spring has become one of the principal abiotic stresses that restrict the growth and development of wheat.Diverse analyses were performed to investigate the mechanism underlying the response of wheat grain development to LT stress during booting.These included morphological observation,measurements of starch synthase activity,and determination of amylose and amylopectin content of wheat grain after exposure to treatment with LT during booting.Additionally,proteomic analysis was performed using tandem mass tags(TMT).Results showed that the plumpness of wheat grains decreased after LT stress.Moreover,the activities of sucrose synthase(SuS,EC 2.4.1.13)and ADP-glucose pyrophosphorylase(AGPase,EC 2.7.7.27)exhibited a significant reduction,leading to a significant reduction in the contents of amylose and amylopectin.A total of 509 differentially expressed proteins(DEPs)were identified by proteomics analysis.The Gene Ontology(GO)enrichment analysis showed that the protein difference multiple in the nutritional repository activity was the largest among the molecular functions,and the up-regulated seed storage protein(ssP)played an active role in the response of grains to LT stress and subsequent damage.The Kyoto Encyclopedia of Genes and Genomes(KEGG)enrichment analysis showed that LT stress reduced the expression of DEPs such as sucrose phosphate synthase(SPS),glucose-1-phosphate adenylyltransferase(glgC),andβ-fructofuranosidase(FFase)in sucrose and starch metabolic pathways,thus affecting the synthesis of grain starch.In addition,many heat shock proteins(HsPs)were found in the protein processing in endoplasmic reticulum pathways,which can resist some damage caused by LT stress.These findings provide a new theoretical foundation for elucidating the underlying mechanism governing wheat yield developmentafterexposuretoLTstress inspring.展开更多
Porous designs effectively reduce stress shielding in metallic orthopedic implants.However,current porous structures often fail to adequately meet the needs of patients with osteoporosis and low-modulus body regions.T...Porous designs effectively reduce stress shielding in metallic orthopedic implants.However,current porous structures often fail to adequately meet the needs of patients with osteoporosis and low-modulus body regions.This study proposes a sinusoidal-based lattice structure for an ultralow and widely tunable modulus design,aiming to match diverse bone tissue requirements and enhance biomechanical compatibility.Parametric modeling and finite element analysis were used to evaluate the performance of this structure.Results show that,within the design range suitable for bone growth,the elastic modulus of this lattice structure is tunable over a wide range,from 0.09 to 32.67 GPa,outperforming existing porous structures.The lowest value closely matched the minimum mechanical properties of human cancellous bone among porous structures.Moreover,the structure exhibited distinct anisotropic characteristics,allowing for directional design based on mechanical requirements.The structure’s permeability ranged from 1.19×10^(-8) m^(2) to 2.3×10^(-7) m^(2),making it highly compatible with human cancellous bone and meeting the requirements of orthopedic implants.Samples with porosities ranging from 46% to 87% were successfully fabricated using powder bed fusion additive manufacturing,validating the simulation predictions.This tunable low-modulus lattice structure provides a novel approach for developing personalized orthopedic implants,particularly for patients with specialized needs such as osteoporosis,and can potentially enhance biomechanical compatibility and long-term stability.展开更多
Rationally regulating the porosity of hard carbon(HC),especially the closed pores matching the low potential plateau and the ultra-microporous structure suitable for Na+embedding,has been shown to be the key to improv...Rationally regulating the porosity of hard carbon(HC),especially the closed pores matching the low potential plateau and the ultra-microporous structure suitable for Na+embedding,has been shown to be the key to improving the sodium storage performance and initial coulombic efficiency(ICE).However,the preparation of such HC materials with specific pore structures still faces great challenges.Herein,a simple pre-oxidation strategy is employed to construct abundant closed ultra-microporous structures in soy protein powder-derived HC material,achieving a significant improvement in its ICE and platform capacity.The pre-oxidation process promotes the cross-linking degree of the soy protein,thereby hindering the directional growth of graphite domains during the carbonization process.The optimized HC exhibits ultra-high platform capacity(329 mAh g^(-1))and considerable energy density(148.5 Wh kg^(-1)).Based on the ex-situ Raman and X-ray photoelectron spectroscopy characterization results,the excellent sodium storage capacity of the HC material is attributed to the synergistic effect of adsorption-intercalation/filling.The presented work provides novel insights into the synthesis of other biomass-derived HC materials with abundant closed ultra-micro pores.展开更多
We are intrigued by the issues of shock instability,with a particular emphasis on numerical schemes that address the carbuncle phenomenon by reducing dissipation rather than increasing it.For a specific class of plana...We are intrigued by the issues of shock instability,with a particular emphasis on numerical schemes that address the carbuncle phenomenon by reducing dissipation rather than increasing it.For a specific class of planar flow fields where the transverse direction exhibits vanishing but non-zero velocity components,such as a disturbed onedimensional(1D)steady shock wave,we conduct a formal asymptotic analysis for the Euler system and associated numerical methods.This analysis aims to illustrate the discrepancies among various low-dissipative numerical algorithms.Furthermore,a numerical stability analysis of steady shock is undertaken to identify the key factors underlying shock-stable algorithms.To verify the stability mechanism,a consistent,low-dissipation,and shock-stable HLLC-type Riemann solver is presented.展开更多
The lithium-oxygen battery(LOB)is a promising source of green energy due to its energy density.However,the development of this technology is limited by the insoluble discharge product it produces.In this work,a cathod...The lithium-oxygen battery(LOB)is a promising source of green energy due to its energy density.However,the development of this technology is limited by the insoluble discharge product it produces.In this work,a cathode material with a p-n heterostructure of polyaniline(PANI)/ZnS is prepared to trap visible light,utilizing a ZnS quantum dot(ZnS QD)network to form a large number of photogenerated electron–hole pairs,thus promoting the generation and decomposition of Li_(2)O_(2).The prepared PANI/ZnS has an ultra-low overpotential of 0.06 V under illumination.Furthermore,density functional theory theoretical calculation has demonstrated the ability of the heterostructures to adsorb oxygen-containing intermediates,which not only facilitates the growth of Li_(2)O_(2),but also reduces the reaction energy required to decompose Li_(2)O_(2).The present work provides a solution to the problem of insolubility of discharge products in photo-assisted LOB.展开更多
Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-form...Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.展开更多
Sodium-ion batteries (SIBs) with organic electrodes are an emerging research direction due to the sustainability of organic materials based on elements like C,H,O,and sodium ions.Currently,organic electrode materials ...Sodium-ion batteries (SIBs) with organic electrodes are an emerging research direction due to the sustainability of organic materials based on elements like C,H,O,and sodium ions.Currently,organic electrode materials for SIBs are mainly used as cathodes because of their relatively high redox potentials(>1 V).Organic electrodes with low redox potential that can be used as anode are rare.Herein,a novel organic anode material (tetrasodium 1,4,5,8-naphthalenetetracarboxylate,Na_(4)TDC) has been developed with low redox potential (<0.7 V) and excellent cyclic stability.Its three-sodium storage mechanism was demonstrated with various in-situ/ex-situ spectroscopy and theoretical calculations,showing a high capacity of 208 mAh/g and an average decay rate of merely 0.022%per cycle.Moreover,the Na_(4)TDC-hard carbon composite can further acquire improved capacity and cycling stability for 1200 cycles even with a high mass loading of up to 20 mg cm^(-2).By pairing with a thick Na_(3)V_(2)(PO_(4))_(3)cathode (20.6 mg cm^(-2)),the as-fabricated full cell exhibited high operating voltage (2.8 V),excellent rate performance and cycling stability with a high capacity retention of 88.7% after 200 cycles,well highlighting the Na_(4)TDC anode material for SIBs.展开更多
CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pe...CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.展开更多
During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a rest...During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.展开更多
Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration eff...Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration efficiency,complex denitration system,and high investment and operating cost.Here we put forward a novel polymer non-catalytic reduction(PNCR)technology that utilized a new type of polymer agent to remove NO_(x),and the proposed PNCR technology was applied to the existing waste-to-energy plant to test the denitration performance.The PNCR technology demonstrated excellent denitration performance with a NO_(x) emission concentration of<100 mg/Nm^(3) and high denitration efficiency of>75%at the temperature range of 800-900℃,which showed the application feasibility even on the complex and unstable industrial operating conditions.In addition,PNCR and hybrid polymer/selective non-catalytic reduction(PNCR/SNCR)technology possessed remarkable economic advantages including low investment fee and low operating cost of<10 CNY per ton of municipal solid waste(MSW)compared with selective catalytic reduction(SCR)technology.The excellent denitration performance of PNCR technology forebodes a broad industrial application prospect in the field of flue gas cleaning for waste-to-energy plants.展开更多
Tectonic activities significantly impact deep reservoir properties via sedimentary and diagenetic processes,and this is particularly true for lacustrine rift basins.The tectonic-sedimentary-diageneticreservoir system ...Tectonic activities significantly impact deep reservoir properties via sedimentary and diagenetic processes,and this is particularly true for lacustrine rift basins.The tectonic-sedimentary-diageneticreservoir system is crucial in deep reservoir exploration.This study examined the first member and upper submember of the second member of the Dongying Formation in the Bodong Low Uplift in the Bohai Bay Basin(East China),documenting the petrologic features and physical properties of reservoirs in different tectonic sub-units through integrated analysis of log and rock data,along with core observation.A mechanism for deep reservoir formation in lacustrine rift basins was developed to elucidate the sedimentary and diagenetic processes in complex tectonic settings.The results show that tectonic activities result in the occurrence of provenances in multiple directions and the existence of reservoirs at varying burial depths,as well as the significant diversity in sedimentary and diagenetic processes.The grain sizes of the sandstones,influenced by transport pathways rather than the topography of the sedimentary area,exhibit spatial complexity due to tectonic frameworks,which determine the initial pore content of reservoirs.However,the burial depth,influenced by subsequent tectonic subsidence,significantly impacts pore evolution during diagenesis.Based on the significant differences of reservoirs in slope zone,low uplift and depression zone,we establish different tectonic-diagenetic models in deep complex tectonic units of lacustrine rift basins.展开更多
This paper presents a design method to implement an antenna array characterized by ultra-wide beam coverage,low profile,and low Sidelobe Level(SLL)for the application of Unmanned Aerial Vehicle(UAV)air-to-ground commu...This paper presents a design method to implement an antenna array characterized by ultra-wide beam coverage,low profile,and low Sidelobe Level(SLL)for the application of Unmanned Aerial Vehicle(UAV)air-to-ground communication.The array consists of ten broadside-radiating,ultrawide-beamwidth elements that are cascaded by a central-symmetry series-fed network with tapered currents following Dolph-Chebyshev distribution to provide low SLL.First,an innovative design of end-fire Huygens source antenna that is compatible with metal ground is presented.A low-profile,half-mode Microstrip Patch Antenna(MPA)is utilized to serve as the magnetic dipole and a monopole is utilized to serves as the electric dipole,constructing the compact,end-fire,grounded Huygens source antenna.Then,two opposite-oriented end-fire Huygens source antennas are seamlessly integrated into a single antenna element in the form of monopole-loaded MPA to accomplish the ultrawide,broadside-radiating beam.Particular consideration has been applied into the design of series-fed network as well as antenna element to compensate the adverse coupling effects between elements on the radiation performance.Experiment indicates an ultrawide Half-Power Beamwidth(HPBW)of 161°and a low SLL of-25 dB with a high gain of 12 d Bi under a single-layer configuration.The concurrent ultrawide beamwidth and low SLL make it particularly attractive for applications of UAV air-to-ground communication.展开更多
Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomer...Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.展开更多
基金supported by the Qilu University of Technology(Shandong Academy of Sciences),the Basic Research Project of Science,Education and Industry Integration Pilot Project(No.2022PY047).
文摘Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechanism underlying the synergistic reaction remains a critical issue.This study introduces a photothermal synergistic system for the removal of ethyl acetate(EA)by synthesizing Cu-doped OMS-2(denoted as Cu-OMS-2).Under ultraviolet-visible(UV–Vis)irradiation in a flow system,the Cu-OMS-2 catalyst exhibited significantly enhanced performance in the EA degradation process,nearly doubling the effectiveness of pure OMS-2,and increasing carbon dioxide yield by 20%.This exceptional performance is attributed to the synergistic effect of increased oxygen vacancies(OV)at OMS-2 active sites and Cu doping,as confirmed by H2-TPR,O_(2)-TPD,and CO consump-tion measurements.This study clarifies the catalytic mechanism of light-assisted thermocatalysis and offers a novel strategy for designing photothermal catalysts with homogeneous Cu-doped nanorods for VOC removal.
基金supported by the National Key R&D Program of China(No.2022YFC3701500)the Key R&D Plan Projects of Zhejiang Province(No.2024SSYS0072)Zhejiang Provincial Natural Science Foundation(No.LDT23E0601).
文摘Ship operations are crucial to global trade,and their decarbonization is essential to mitigate climate change.This study evaluates the economic viability of existing and emerging decarbonization technologies in maritime shipping using the levelized cost of energy methodology.It includes a detailed comparative analysis based on essential criteria and sensitivity assessments to highlight the economic impacts of technological advancements.Key factors influencing total costs include fuel costs,carbon pricing,and energy demands for carbon capture.The findings reveal that methanol is more cost-effective than heavy fuel oil(HFO)when priced below 3000 CNY/t,assuming HFO costs 4400 CNY/t.Additionally,methanol with post-combustion carbon capture is less expensive than pre-combustion carbon capture.When carbon prices rise above 480 CNY/t,carbon capture technologies prove more economical than purchasing carbon emission allowances for HFO and liquefied natural gas.Enhanc-ing the use of exhaust gas waste heat is recommended for cost savings.Post-combustion carbon capture also shows greater efficiency,requiring about 1.1 GJ/t less energy than pre-combustion methods,leading to lower overall costs.Future research should focus on market mechanisms to stabilize fuel prices and develop less energy-intensive carbon capture technologies.This study offers critical insights into effective decarbonization strategies for advancing global maritime trade in the present and future.
基金financially supported by the National Natural Science Foundation of China (Nos.21975110 and 21972058)Taishan Youth Scholar Program of Shandong Province
文摘The reasonable employment of cocatalyst in photocatalysis can effectively promote the photocatalytic H_(2)production activity.In this study,carbon hollow spheres(C),as a good conductive nonmetallic material,have been utilized as a novel cocatalyst and a matrix for loading the Cu-doped-TiO_(2)nanoparticles by a successive hydrother-mal method and metal molten salt method.The Cu-doped-TiO_(2)nanoparticles were tightly anchored on the surface of carbon hollow sphere to form a zero-dimensional/three dimensional(0D/3D)Cu-doped-TiO2/C heterojunction.The optimal Cu-doped-TiO_(2)/C heterojunction demon-strated greatly enhanced photocatalytic H_(2) generation activity(14.4 mmol·g^(-1)·h^(-1))compared with TiO_(2)(0.33 mmol·g^(-1)·h^(-1))and TiO_(2)/C(0.7 mmol·g^(-1)·h^(-1)).The performance improvement was mainly due to the syner-gistic effect of carbon hollow sphere cocatalyst and Cu-doping,the Cu-doping in TiO_(2)nanoparticles can minimize charge recombination and enhance the available photoex-cited electrons,while the 3D carbon hollow spheres can act as electron traps to accelerate the charge separation and offer abundant active sites for solar water splitting reaction.
基金supported by the China Postdoctoral Science Foundation(No.2020M671624)the State Key Laboratory of Pollution Control and Resource Reuse(No.PCRRF20011).
文摘Two anaerobic ammonia oxidation(anammox)systems,one with adding nano-scale zerovalent iron modified biochar(nZVI@BC)and the other with adding biochar,were constructed to explore the feasibility of nZVI@BC for enhancing the resistance of low-nitrogen anammox processes to low temperatures.The results showed that the average nitrogen removal efficiency with nZVI@BC addition at lowtemperatureswas maintained at about 80%,while that with biochar addition gradually decreased to 69.49%.The heme-c content of biomass with nZVI@BC was significantly higher by 36.60%-91.45%.Additional,nZVI@BC addition resulted in more extracellular polymeric substances,better biomass granulation,and a higher abundance of anammox bacteria.In particularly,anammox genes hzsA/B/C,hzo and hdh played a pivotal role in maintaining nitrogen removal performance at 15℃.These findings suggest that nZVI@BC has the potential to enhance the resistance of low-nitrogen anammox processes to low temperatures,making it a valuable approach for practical applications in low-nitrogen and low-temperature wastewater treatment.
基金the National Natural Science Foundation of China(No.22279070[L.Wang]and U21A20170[X.He])the Ministry of Science and Technology of China(No.2019YFA0705703[L.Wang])。
文摘Lithium-ion batteries(LIBs)face significant limitations in low-temperature environments,with the slow interfacial de-solvation process and the hindered Li+transport through the interphase layer emerging as key obstacles beyond the issue of ionic conductivity.This investigation unveils a novel formulation that constructs an anion-rich solvation sheath within strong solvents,effectively addressing all three of these challenges to bolster low-temperature performance.The developed electrolyte,characterized by an enhanced concentration of contact ion pairs(CIPs)and aggregates(AGGs),facilitates the formation of an inorganic-rich interphase layer on the anode and cathode particles.This promotes de-solvation at low temperatures and stabilizes the electrode-electrolyte interphase.Full cells composed of LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622)and graphite,when equipped with this electrolyte,showcase remarkable cycle stability and capacity retention,with 93.3% retention after 500 cycles at room temperature(RT)and 95.5%after 120 cycles at -20℃.This study validates the utility of the anion-rich solvation sheath in strong solvents as a strategy for the development of low-temperature electrolytes.
基金supported by the Natural Science Foundation of Anhui Province(No.2308085QE146 and 2208085ME116)the National Natural Science Foundation of China(No.52173039)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20210894)the Anhui Provincial Universities Outstanding Youth Research Project(No.2023AH020018).
文摘Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fifth-generation communication equipment.In this study,multistage microcellular waterborne polyurethane(WPU)composites were constructed via gradient induction,layer-by-layer casting,and supercritical carbon dioxide foaming.The gradient-structured WPU/ironcobalt loaded reduced graphene oxide(FeCo@rGO)foam serves as an impedance-matched absorption layer,while the highly conductive WPU/silver loaded glass microspheres(Ag@GM)layer is employed as a reflection layer.Thanks to the incorporation of an asymmetric structure,as well as the introduction of gradient and porous configurations,the composite foam demonstrates excellent conductivity,outstanding EMI SE(74.9 dB),and minimal reflection characteristics(35.28%)in 8.2-12.4 GHz,implying that more than 99.99999%of electromagnetic(EM)waves were blocked and only 35.28%were reflected to the external environment.Interestingly,the reflectivity of the composite foam is reduced to 0.41%at 10.88 GHz due to the resonance for incident and reflected EM waves.Beyond that,the composite foam is characterized by low density(0.47 g/cm^(3))and great stability of EMI shielding properties.This work offers a viable approach for craft-ing lightweight,highly shielding,and minimally reflective EMI shielding composites.
基金supported by the National Natural Science Foundation of China(32372223)the National Key Research and Development Program of China(2022YFD2301404)+1 种基金the College Students'Innovationand Entrepreneurship Training Program of Anhui Province,China(S202210364136)the Natural Science Research Project of Anhui Educational Committee,China(2023AH040133).
文摘Low temperature(LT)in spring has become one of the principal abiotic stresses that restrict the growth and development of wheat.Diverse analyses were performed to investigate the mechanism underlying the response of wheat grain development to LT stress during booting.These included morphological observation,measurements of starch synthase activity,and determination of amylose and amylopectin content of wheat grain after exposure to treatment with LT during booting.Additionally,proteomic analysis was performed using tandem mass tags(TMT).Results showed that the plumpness of wheat grains decreased after LT stress.Moreover,the activities of sucrose synthase(SuS,EC 2.4.1.13)and ADP-glucose pyrophosphorylase(AGPase,EC 2.7.7.27)exhibited a significant reduction,leading to a significant reduction in the contents of amylose and amylopectin.A total of 509 differentially expressed proteins(DEPs)were identified by proteomics analysis.The Gene Ontology(GO)enrichment analysis showed that the protein difference multiple in the nutritional repository activity was the largest among the molecular functions,and the up-regulated seed storage protein(ssP)played an active role in the response of grains to LT stress and subsequent damage.The Kyoto Encyclopedia of Genes and Genomes(KEGG)enrichment analysis showed that LT stress reduced the expression of DEPs such as sucrose phosphate synthase(SPS),glucose-1-phosphate adenylyltransferase(glgC),andβ-fructofuranosidase(FFase)in sucrose and starch metabolic pathways,thus affecting the synthesis of grain starch.In addition,many heat shock proteins(HsPs)were found in the protein processing in endoplasmic reticulum pathways,which can resist some damage caused by LT stress.These findings provide a new theoretical foundation for elucidating the underlying mechanism governing wheat yield developmentafterexposuretoLTstress inspring.
基金supported by National Key R&D Program of China(Grant No.2022YFB4600500)Fundamental Research Funds for the Central Universities,and the Program for Innovation Team of Shaanxi Province(Grant No.2023-CX-TD-17).
文摘Porous designs effectively reduce stress shielding in metallic orthopedic implants.However,current porous structures often fail to adequately meet the needs of patients with osteoporosis and low-modulus body regions.This study proposes a sinusoidal-based lattice structure for an ultralow and widely tunable modulus design,aiming to match diverse bone tissue requirements and enhance biomechanical compatibility.Parametric modeling and finite element analysis were used to evaluate the performance of this structure.Results show that,within the design range suitable for bone growth,the elastic modulus of this lattice structure is tunable over a wide range,from 0.09 to 32.67 GPa,outperforming existing porous structures.The lowest value closely matched the minimum mechanical properties of human cancellous bone among porous structures.Moreover,the structure exhibited distinct anisotropic characteristics,allowing for directional design based on mechanical requirements.The structure’s permeability ranged from 1.19×10^(-8) m^(2) to 2.3×10^(-7) m^(2),making it highly compatible with human cancellous bone and meeting the requirements of orthopedic implants.Samples with porosities ranging from 46% to 87% were successfully fabricated using powder bed fusion additive manufacturing,validating the simulation predictions.This tunable low-modulus lattice structure provides a novel approach for developing personalized orthopedic implants,particularly for patients with specialized needs such as osteoporosis,and can potentially enhance biomechanical compatibility and long-term stability.
基金supported by the National Natural Science Foundation of China(42167068,22269020)the Gansu Province Higher Education Industry Support Plan Project(2023CYZC-68)the Central Guidance for Local Science and Technology Development Funds Project(YDZX20216200001007)。
文摘Rationally regulating the porosity of hard carbon(HC),especially the closed pores matching the low potential plateau and the ultra-microporous structure suitable for Na+embedding,has been shown to be the key to improving the sodium storage performance and initial coulombic efficiency(ICE).However,the preparation of such HC materials with specific pore structures still faces great challenges.Herein,a simple pre-oxidation strategy is employed to construct abundant closed ultra-microporous structures in soy protein powder-derived HC material,achieving a significant improvement in its ICE and platform capacity.The pre-oxidation process promotes the cross-linking degree of the soy protein,thereby hindering the directional growth of graphite domains during the carbonization process.The optimized HC exhibits ultra-high platform capacity(329 mAh g^(-1))and considerable energy density(148.5 Wh kg^(-1)).Based on the ex-situ Raman and X-ray photoelectron spectroscopy characterization results,the excellent sodium storage capacity of the HC material is attributed to the synergistic effect of adsorption-intercalation/filling.The presented work provides novel insights into the synthesis of other biomass-derived HC materials with abundant closed ultra-micro pores.
基金Project supported by the National Natural Science Foundation of China(Nos.12471367 and12361076)the Research Program of Science and Technology at Universities of Inner Mongolia Autonomous Region(Nos.NJZY19186,NJZY22036,and NJZY23003)。
文摘We are intrigued by the issues of shock instability,with a particular emphasis on numerical schemes that address the carbuncle phenomenon by reducing dissipation rather than increasing it.For a specific class of planar flow fields where the transverse direction exhibits vanishing but non-zero velocity components,such as a disturbed onedimensional(1D)steady shock wave,we conduct a formal asymptotic analysis for the Euler system and associated numerical methods.This analysis aims to illustrate the discrepancies among various low-dissipative numerical algorithms.Furthermore,a numerical stability analysis of steady shock is undertaken to identify the key factors underlying shock-stable algorithms.To verify the stability mechanism,a consistent,low-dissipation,and shock-stable HLLC-type Riemann solver is presented.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.52171206 and52271209)Key Project of Hebei Natural Science Foundation(Nos.F2024201031 and E20202201030)+4 种基金Beijing-Tianjin-Hebei Collaborative Innovation Community Construction Project(No.21344301D)the Second Batch of Young Talent of Hebei Province(Nos.70280016160250 and 70280011808)Key Fund in Hebei Province Department of Education China(No.ZD2021014)the Central Government Guide Local Funding Projects for Scientific and Technological Development(Nos.216Z4404G and 206Z4402G)Interdisciplinary Research Program of Natural Science of Hebei University(No.DXK202107)。
文摘The lithium-oxygen battery(LOB)is a promising source of green energy due to its energy density.However,the development of this technology is limited by the insoluble discharge product it produces.In this work,a cathode material with a p-n heterostructure of polyaniline(PANI)/ZnS is prepared to trap visible light,utilizing a ZnS quantum dot(ZnS QD)network to form a large number of photogenerated electron–hole pairs,thus promoting the generation and decomposition of Li_(2)O_(2).The prepared PANI/ZnS has an ultra-low overpotential of 0.06 V under illumination.Furthermore,density functional theory theoretical calculation has demonstrated the ability of the heterostructures to adsorb oxygen-containing intermediates,which not only facilitates the growth of Li_(2)O_(2),but also reduces the reaction energy required to decompose Li_(2)O_(2).The present work provides a solution to the problem of insolubility of discharge products in photo-assisted LOB.
基金financial support from the Department of Science and Technology of Jilin Province(20240304104SF,20240304103SF)the Research and Innovation Fund of the Beihua University for the Graduate Student(Major Project 2023012)。
文摘Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.
基金National Key Research and Development Program of China (2022YFB2402200)National Natural Science Foundation of China (22225201,22379028)+2 种基金Fundamental Research Funds for the Central Universities (20720220010)Shanghai Pilot Program for Basic Research–Fudan University 21TQ1400100 (21TQ009)Key Basic Research Program of Science and Technology Commission of Shanghai Municipality (23520750400)。
文摘Sodium-ion batteries (SIBs) with organic electrodes are an emerging research direction due to the sustainability of organic materials based on elements like C,H,O,and sodium ions.Currently,organic electrode materials for SIBs are mainly used as cathodes because of their relatively high redox potentials(>1 V).Organic electrodes with low redox potential that can be used as anode are rare.Herein,a novel organic anode material (tetrasodium 1,4,5,8-naphthalenetetracarboxylate,Na_(4)TDC) has been developed with low redox potential (<0.7 V) and excellent cyclic stability.Its three-sodium storage mechanism was demonstrated with various in-situ/ex-situ spectroscopy and theoretical calculations,showing a high capacity of 208 mAh/g and an average decay rate of merely 0.022%per cycle.Moreover,the Na_(4)TDC-hard carbon composite can further acquire improved capacity and cycling stability for 1200 cycles even with a high mass loading of up to 20 mg cm^(-2).By pairing with a thick Na_(3)V_(2)(PO_(4))_(3)cathode (20.6 mg cm^(-2)),the as-fabricated full cell exhibited high operating voltage (2.8 V),excellent rate performance and cycling stability with a high capacity retention of 88.7% after 200 cycles,well highlighting the Na_(4)TDC anode material for SIBs.
基金project was supported by the Fund of State Key Laboratory of Deep Oil and Gas,China University of Petroleum(East China)(No.SKLDOG2024-ZYRC-06)Key Program of National Natural Science Foundation of China(52130401)+1 种基金National Natural Science Foundation of China(52104055,52374058)Shandong Provincial Natural Science Foundation,China(ZR2021ME171,ZR2024YQ043)。
文摘CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.
基金financially supported by the National Natural Science Foundation of China(Nos.52274315 and 52374320)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-22-011A1 and FRF-DF22-16)。
文摘During the continuous casting process of high-Mn high-Al steels,various types of gases such as Ar need to escape through the top of the mold.In which,the behavior of bubbles traversing the liquid slag serves as a restrictive link,closely associated with viscosity and the thickness of liquid slag.In contrast to two-dimensional surface observation,three-dimensional(3D)analysis method can offer a more intuitive,accurate,and comprehensive information.Therefore,this study employs a 3D X-ray microscope(3D-XRM)to obtained spatial distribution and 3D morphological characteristics of residual bubbles in mold flux under different basicity of liquid slag,different temperatures,and different holding times.The results indicate that as basicity of slag increases from 0.52 to 1.03,temperature increases from 1423 to 1573 K,the viscosity of slag decreases,the floating rate of bubbles increases.In addition,when holding time increases from 10 to 30 s,the bubbles floating distance increases,and the volume fraction and average equivalent sphere diameter of the bubbles solidified in the mold flux gradually decreases.In one word,increasing the basicity,temperature,and holding time leading to an increase in the removal rate of bubbles especially for the large.These findings of bubbles escape behavior provide valuable insights into optimizing low basicity mold flux for high-Mn high-Al steels.
基金supported by the National Natural Science Foundation of China(No.92367107)。
文摘Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration efficiency,complex denitration system,and high investment and operating cost.Here we put forward a novel polymer non-catalytic reduction(PNCR)technology that utilized a new type of polymer agent to remove NO_(x),and the proposed PNCR technology was applied to the existing waste-to-energy plant to test the denitration performance.The PNCR technology demonstrated excellent denitration performance with a NO_(x) emission concentration of<100 mg/Nm^(3) and high denitration efficiency of>75%at the temperature range of 800-900℃,which showed the application feasibility even on the complex and unstable industrial operating conditions.In addition,PNCR and hybrid polymer/selective non-catalytic reduction(PNCR/SNCR)technology possessed remarkable economic advantages including low investment fee and low operating cost of<10 CNY per ton of municipal solid waste(MSW)compared with selective catalytic reduction(SCR)technology.The excellent denitration performance of PNCR technology forebodes a broad industrial application prospect in the field of flue gas cleaning for waste-to-energy plants.
基金funded by the Open Fund of Key Laboratory of Marine Geology and Environment,Chinese Academy of Sciences(Grant No.MGE2020KG10)the Open Fund of Key Laboratory of Submarine Geosciences,Ministry of Natural Resources(Grant No.KLSG 2208)+2 种基金the Natural Science Basic Research Program of Shaanxi(Grant No.2024JC-YBMS-227,2023-JC-QN-0287)the Postgraduate Innovation and Practice Ability Development Fund of Xi'an Shiyou University(No.YCS23113046)the National Natural Science Foundation of China(Grant No.41802128,42076219)。
文摘Tectonic activities significantly impact deep reservoir properties via sedimentary and diagenetic processes,and this is particularly true for lacustrine rift basins.The tectonic-sedimentary-diageneticreservoir system is crucial in deep reservoir exploration.This study examined the first member and upper submember of the second member of the Dongying Formation in the Bodong Low Uplift in the Bohai Bay Basin(East China),documenting the petrologic features and physical properties of reservoirs in different tectonic sub-units through integrated analysis of log and rock data,along with core observation.A mechanism for deep reservoir formation in lacustrine rift basins was developed to elucidate the sedimentary and diagenetic processes in complex tectonic settings.The results show that tectonic activities result in the occurrence of provenances in multiple directions and the existence of reservoirs at varying burial depths,as well as the significant diversity in sedimentary and diagenetic processes.The grain sizes of the sandstones,influenced by transport pathways rather than the topography of the sedimentary area,exhibit spatial complexity due to tectonic frameworks,which determine the initial pore content of reservoirs.However,the burial depth,influenced by subsequent tectonic subsidence,significantly impacts pore evolution during diagenesis.Based on the significant differences of reservoirs in slope zone,low uplift and depression zone,we establish different tectonic-diagenetic models in deep complex tectonic units of lacustrine rift basins.
基金supported by the National Natural Science Foundation of China(No.62371080 and 62031006)the National Science Foundation of Chongqing,China(No.CSTB2022NSCQ-MSX0597)the Venture&Innovation Support Program for Chongqing Overseas Returnees,China(No.cx2022063)。
文摘This paper presents a design method to implement an antenna array characterized by ultra-wide beam coverage,low profile,and low Sidelobe Level(SLL)for the application of Unmanned Aerial Vehicle(UAV)air-to-ground communication.The array consists of ten broadside-radiating,ultrawide-beamwidth elements that are cascaded by a central-symmetry series-fed network with tapered currents following Dolph-Chebyshev distribution to provide low SLL.First,an innovative design of end-fire Huygens source antenna that is compatible with metal ground is presented.A low-profile,half-mode Microstrip Patch Antenna(MPA)is utilized to serve as the magnetic dipole and a monopole is utilized to serves as the electric dipole,constructing the compact,end-fire,grounded Huygens source antenna.Then,two opposite-oriented end-fire Huygens source antennas are seamlessly integrated into a single antenna element in the form of monopole-loaded MPA to accomplish the ultrawide,broadside-radiating beam.Particular consideration has been applied into the design of series-fed network as well as antenna element to compensate the adverse coupling effects between elements on the radiation performance.Experiment indicates an ultrawide Half-Power Beamwidth(HPBW)of 161°and a low SLL of-25 dB with a high gain of 12 d Bi under a single-layer configuration.The concurrent ultrawide beamwidth and low SLL make it particularly attractive for applications of UAV air-to-ground communication.
基金financially supported by the National Natural Science Foundation of China(62464010)Spring City Plan-Special Program for Young Talents(K202005007)+3 种基金Yunnan Talents Support Plan for Yong Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Key Laboratory of Artificial Microstructures in Yunnan Higher EducationFrontier Research Team of Kunming University 2023。
文摘Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.
