The increasing strength of new structural materials and the span of new structures, accompanied by aesthetic requirements for greater slenderness, are resulting in more applications of long-span structures. In this pa...The increasing strength of new structural materials and the span of new structures, accompanied by aesthetic requirements for greater slenderness, are resulting in more applications of long-span structures. In this paper, serviceability control technology and its design theory are studied. First, a novel tuned mass damper （TMD） with controllable stiffness is developed. Second, methods for modeling human-induced loads are proposed, including standing up, walking, jumping and running, and an analysis method for long-span floor response is proposed based on a finite element model. Third, a design method for long-span floors installed with a multiple TMD （MTMD） system considering human comfort is introduced, largely based on a study of existing literature. Finally, a design, analysis and field test is conducted using several large scale buildings in China including the Beijing Olympic Park National Conference Center, Changsha New Railway Station and the Xi＇an Northern Railway Station. The analytical and field test results show that the MTMD system designed using the proposed method is capable of effectively mitigating the vertical vibration of long-span floor structures. The study presented in this paper provides an important reference for the analysis of vibration serviceability of similar long-span floors and design of control system for these structures.展开更多
The key points to consider in determining the effectiveness of using structural isolation with shape memory alloys （SMA） are the constitutive model, the SMA isolation device and the analysis method. In this paper, a...The key points to consider in determining the effectiveness of using structural isolation with shape memory alloys （SMA） are the constitutive model, the SMA isolation device and the analysis method. In this paper, a simplified constitutive model based on the classic theory of plasticity is proposed to simulate the behavior of the superelasticity of the SMA, in which the martensite volume fraction is considered as one of the state variables. Comparisons between simulation results and experimental results are made and indicate that the proposed constitutive model yields stress-strain curves that are in good agreement with the experimental ones. Thus, the proposed model can correctly simulate the yield mechanism and energy dissipation capacity of the SMA. Next, in order to make full use of the superelasticity of SMA, a new SMA isolator composed of pre-tensioned SMA bars is presented. Then, a finite element analytical model is established to simulate the behavior of the SMA isolator according to its configuration and simplified constitutive model. Finally, a simplified design method for long-span structures installed with SMA isolators is proposed, which is further used to investigate the isolation effects of a space grid structure. Results show that the SMA isolator can reduce the seismic responses of the structure effectively, which indicates the effectiveness of the proposed SMA isolation method.展开更多
The new technique that combines wave superposition with the fast Fourier transformation was introduced to simulate the nodal three-dimension relevant wind velocity time series of spatial structures. The wind velocity ...The new technique that combines wave superposition with the fast Fourier transformation was introduced to simulate the nodal three-dimension relevant wind velocity time series of spatial structures. The wind velocity field where the spatial structure is located is assumed to be homogeneous. The wind’s power spectral density is divided into frequency spectral function and coherency function and the spectral functions are transformed as the superposition coefficients. The wavelet analysis has excellent localized characters in both time and frequency domains, which not only makes wind velocity time series analysis more accurate, but also can focus on any detail of the objective signal series. The discrete wavelet transformation was adopted to decompose and reconstruct the discrete wind velocity time series. The stability of wavelet analysis for the wind velocity time series was also proved.展开更多
In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honey...In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.展开更多
Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'...Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.展开更多
In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented...In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented product FGPA-G 2-H on Aβ25-35-induced PC 12 cells were explored.The structure of GPA-G 2-H was determined by means of zeta potential analysis,FTIR,HPLC,XRD,GC-MS and NMR.The backbone of GPA-G 2-H was mainly composed of→4)-α-D-Glcp-(1→with branches substituted at O-3.Notably,GPA-G 2-H was degraded by intestinal microbiota in vitro with total sugar content and pH value decreasing,and short-chain fatty acids(SCFAs)increasing.Moreover,GPA-G 2-H significantly promoted the proliferation of Lactobacillus,Muribaculaceae and Weissella,thereby making positive alterations in intestinal microbiota composition.Additionally,FGPA-G 2-H activated the Nrf 2/HO-1 signaling pathway,enhanced HO-1,NQO 1,SOD and GSH-Px,while inhabited Keap 1,MDA and LDH,which alleviated Aβ-induced oxidative stress in PC 12 cells.These provide a solid theoretical basis for the further development of ginseng polysaccharides as functional food and antioxidant drugs.展开更多
Two Co(Ⅱ)and Ni(Ⅱ)complexes were synthesized by synergistic coordination of 3,3-diphenylpropionic acid(HDPA)and 2,2′-bipyridylamine(PAm).The structures of complexes[Co(DPA)_(2)(PAm)]·2H_(2)O(1)and[Ni(DPA)_(2)(...Two Co(Ⅱ)and Ni(Ⅱ)complexes were synthesized by synergistic coordination of 3,3-diphenylpropionic acid(HDPA)and 2,2′-bipyridylamine(PAm).The structures of complexes[Co(DPA)_(2)(PAm)]·2H_(2)O(1)and[Ni(DPA)_(2)(PAm)]·2H_(2)O(2)were determined by single-crystal X-ray diffraction,IR spectroscopy,and powder X-ray diffraction.Hirshfeld surface analysis provided quantitative insights into the intermolecular interactions within the complexes,while molecular docking studies elucidated their binding modes and affinities toward urease.Furthermore,the biological activities of both complexes were systematically evaluated through a range of assays,including DNA binding,urease inhibition,antibacterial activity,and in vitro cytotoxicity against cancer cells.Both complexes exhibited binding affinity for DNA and displayed notable urease inhibitory activity.Under in vitro conditions,both complexes showed appreciable cytotoxicity toward HepG2 cells with efficacy comparable to clinically used platinumbased anticancer agents.CCDC:2479943,1;2479944,2.展开更多
Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimizat...Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimization method grounded in the global adjustment of nodal coordinates.First,a build direction is selected to minimize the number of violating struts.Then,an angular-constraint matrix is assembled from strut direction vectors,and analytical sensitivities with respect to nodal coordinates are derived to enable efficient constrained optimization under nonlinear angular inequality constraints.Numerical studies on two complex curved-surface lattices demonstrate that all overhang violations are eliminated while only minor changes are induced in global stiffness and strength.In particular,the maximum displacement of an ergonomic insole varies by only 2.87%after optimization.The results confirm the method’s versatility and engineering robustness,providing a practical approach for additive manufacturing-oriented lattice structure design.展开更多
The core-shell structure in bulk TiNb binary alloy was designed and studied by phase-field simulations,where various core-shell structures were obtained by precise control of the initial and boundary conditions of the...The core-shell structure in bulk TiNb binary alloy was designed and studied by phase-field simulations,where various core-shell structures were obtained by precise control of the initial and boundary conditions of the TiNb binary alloy system during spinodal decomposition,and then the formation mechanism of core-shell structure was revealed.In addition,the influences of initial temperature gradient,average temperature,and initial concentration distribution of the system on the core-shell structure were investigated.Results show that the initial concentration gradient is the key factor for forming the core-shell structure.Besides,larger initial temperature gradient and higher average temperature can promote the formation of core-shell structure,which can be stabilized by adjusting the initial concentration distribution of the Nb-rich region in TiNb binary alloy.As a theoretical basis,this research provides a novel and simple strategy for the preparation of TiNb-based alloys and other materials with peculiar core-shell structures and desirable mechanical and physical properties.展开更多
SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminu...SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-e...Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.展开更多
Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-ins...Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-inspired lattice structures feature a square-grid 2D lattice with double diagonal bracings and are additively manufactured via digital light processing(DLP).The collapse strength and energy absorption capacity of sea sponge lattice structures are evaluated under various impact conditions and are compared to those of their constituent square-grid and double diagonal lattices.This study demonstrates that sea sponge lattices can achieve an 11-fold increase in energy absorption compared to the square-grid lattice,due to the stabilizing effect of the double diagonal bracings prompting the structure to collapse layer-bylayer under impact.By adjusting the thickness ratio in the sea sponge lattice,up to 76.7%increment in energy absorption is attained.It is also shown that sea-sponge lattices outperform well-established energy-absorbing materials of equal weight,such as hexagonal honeycombs,confirming their significant potential for impact mitigation.Additionally,this research highlights the enhancements in energy absorption achieved by adding a small amount(0.015 phr)of Multi-Walled Carbon Nanotubes(MWCNTs)to the photocurable resin,thus unlocking new possibilities for the design of innovative lightweight structures with multifunctional attributes.展开更多
To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
The hydrated tricyclohexyltin theophylline-7-acetic acid(tpH)complex[Sn(C_(6)H_(11))_(3)(tp)(H_(2)O)]was synthesized via an ethanol solvothermal method using tricyclohexyltin hydroxide and tpH in a 1∶1 molar ratio.Th...The hydrated tricyclohexyltin theophylline-7-acetic acid(tpH)complex[Sn(C_(6)H_(11))_(3)(tp)(H_(2)O)]was synthesized via an ethanol solvothermal method using tricyclohexyltin hydroxide and tpH in a 1∶1 molar ratio.The complex was characterized by IR,^(1)H(^(13)C)NMR,elemental analysis,and powder X-ray diffraction,and the crystal structure was determined by single-crystal X-ray diffraction.The crystal belongs to the orthorhombic system with space group Iba2,and the central tin atom is in a five-coordinated trigonal bipyramidal configuration.Quantum chemistry ab initio calculations were performed to investigate the stability,molecular orbital energy,and frontier molecular orbital characteristics of the complex.Additionally,its thermal stability,electrochemical properties,and in vitro anticancer activity were evaluated.CCDC:2380308.展开更多
AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layer...AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layers(EBLs).To overcome these limitations,we propose an EBL-free DUV LD design incor-porating a 1-nm undoped Al_(0.8)Ga_(0.2)N thin strip layer after the last quantum barrier.Using PICS3D simula-tions,we evaluate the optical and electrical characteristics.Results show a significant increase in effective electron barrier height(from 158.2 meV to 420.7 meV)and a reduction in hole barrier height(from 149.2 meV to 62.8 meV),which enhance hole injection and reduce electron leakage.The optimized structure(LD3)achieves a 14%increase in output power,improved slope efficiency(1.85 W/A),and lower threshold current.This design also reduces the quantum confined Stark effect and forms dual hole accumulation regions,im-proving recombination efficiency.展开更多
Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet ...Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet little is known about its osteological development characteristics.Understanding these ontogenetic patterns is essential for explaining phylogenetic relationships within Clupeiformes,informing larval identification in ichthyoplankton surveys,and enhancing aquaculture practices.This study describes the ontogenetic characteristics of the appendicular and median skeletons and fin supports in E.punctifer larvae and juveniles,providing quantitative ontogenetic timelines to address gaps in engraulid developmental biology and contribute to teleost ontogeny research.Larval and juvenile specimens of E.punctifer;size range:3.00-34.56 mm standard length(SL)and notochord length(NL)collected from the Philippine Sea were processed using the standard Alizarin red and Alcian blue clearing-and-staining technique to differentiate ossified and cartilaginous elements.Specimens were examined under a stereo microscope and imaged with an HTC1600ISP digital camera for detailed morphological analysis of skeletal structures.Caudal complex development was evident by 5.55 mm NL,with the initial appearance of cartilaginous hypurals 1–2 and parhypural,followed by Hy3–5 at 6.08 mm NL.Cartilaginous Hy6 was visible by 9.58 mm SL in postflexion larvae.Six hypural bones were present from the postflexion to juvenile stage.Principal fin rays formed via intramembranous ossification at 6.32 mm NL,and segmentation was evident by 10.24 mm SL.Neural arch 1 appeared at 7.38 mm NL,preceding full haemal arch development.Uroneurals 1–2 and ural centra ossified by 9.58 mm SL,with Hy5 detached from U1 at 10.24 mm SL.Preural centra ossified before the arches.Epurals 1 and 2 were evident by 10.24 mm SL.Dorsal fin proximal radials developed anteriorly and distal radials posteriorly.Pectoral fin development initiated with an ossified cleithrum and the coracoscapular cartilage at 5.25 mm NL.By 10.24 mm SL,cartilaginous neural and haemal arches and spines were distinct.Uroneural 1 initially develops as cartilage.The formation of a pleurostyle aligns with clupeoid fish skeletal ontogeny.Dorsal and anal fin development follows a distinctive pattern,with variability in fin support development.Our results reveal accelerated caudal complex formation in E.punctifer and contribute new knowledge on the osteological characteristics of the genus Encrasicholina,and aid in understanding larval and juvenile ontogeny of marine teleosts.展开更多
5,5'-dithiobis(2-nitrobenzoic acid)(H_(2)DTNB)was employed as the second ligand to react with cucurbit[6]uril(Q[6])and Cd(NO_(3))_(2),and it was deprotonated or transformed into HDTNB^(-),TNB^(2-)and NSB^(2-)(H_(2...5,5'-dithiobis(2-nitrobenzoic acid)(H_(2)DTNB)was employed as the second ligand to react with cucurbit[6]uril(Q[6])and Cd(NO_(3))_(2),and it was deprotonated or transformed into HDTNB^(-),TNB^(2-)and NSB^(2-)(H_(2)TNB=5,5'-thiobis(2-nitrobenzoic acid),H_(2)NSB=2-nitro-5-sulfobenzoic acid)under different conditions to afford three novel supramolecular assemblies with the formulas of[Cd(H_(2)O)_(4)(Q[6])](HDTNB)_(2)·3H_(2)O(1),[Cd(H_(2)O)_(6)]_(2)(TNB)_(2)·Q[6]·4H_(2)O(2)and[Cd(H_(2)O)_(5)(NSB)]_(2)·Q[6](3).Singe-crystal diffraction(SC-XRD)analysis revealed that assembly 1 is constructed from 2D[Cd(H_(2)O)_(4)(Q[6])]2+supramolecular layers and HDTNB^(-)supra molecular layers,the structure of assembly 2 is comprised of the 2D{[Cd(H_(2)O)_(6)]_(2)·Q[6]}^(4+)supramolecular layers and 1D TNB^(2-)supramolecular chains,while assembly 3 is built from the 3D Q[6]frameworks with[Cd(H_(2)O)_(5)(NSB)]supramolecular chains filled in the pores.Meanwhile,the noncovalent interactions between the ligands HDTNB^(-)/TNB^(2-)/NSB^(2-)and the outer-surface of Q[6]molecules contributed greatly to the formation of the supramolecular architecture of assemblies 1-3.CCDC:2522253,1;2522254,2;2522255,3.展开更多
Abuse of chloramphenicol(CAP)could cause serious side effects to human health.Therefore,it is necessary to detect CAP residues in animal sourced food effectively.Here,the superiority(better stability,higher Apt-CAP lo...Abuse of chloramphenicol(CAP)could cause serious side effects to human health.Therefore,it is necessary to detect CAP residues in animal sourced food effectively.Here,the superiority(better stability,higher Apt-CAP loading efficiency,and higher CAP binding associated conformational change,etc.)of tetrahedral structure to double-chained structure for developing aptasensor was evaluated.Then,a self-assembled DNA tetrahedral structure-based electrochemical aptasensor targeting CAP was developed.Under the optimized conditions,the aptasensor exhibited high sensitivity toward CAP with a limit of detection(LOD)of 0.0676 ng/m L(linear range 0.19-387.76 ng/m L),and high selectivity against the structural analogs of CAP.Moreover,the recovery rate of CAP from spiked milk samples ranged from 100.57%to 101.69%,and only USD 1.34 is needed for detecting CAP in 1 sample.These results suggested the application potential of this aptasesor for detecting CAP in animal sourced foods.展开更多
Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2...Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.展开更多
基金National Natural Science Foundation of China Under Grant No.51178100Foundation of the Priority Sciences Development Program of Higher Education Institutions of Jiangsu Province Under Grant No.1105007001+1 种基金Teaching and Research Foundation for Excellent Young Teachers of Southeast University Under Grant No.3205001205Scientific Research Foundation the Scientific Research Foundation of Graduate School of Southeast University Under Grant No.YBJJ1006
文摘The increasing strength of new structural materials and the span of new structures, accompanied by aesthetic requirements for greater slenderness, are resulting in more applications of long-span structures. In this paper, serviceability control technology and its design theory are studied. First, a novel tuned mass damper （TMD） with controllable stiffness is developed. Second, methods for modeling human-induced loads are proposed, including standing up, walking, jumping and running, and an analysis method for long-span floor response is proposed based on a finite element model. Third, a design method for long-span floors installed with a multiple TMD （MTMD） system considering human comfort is introduced, largely based on a study of existing literature. Finally, a design, analysis and field test is conducted using several large scale buildings in China including the Beijing Olympic Park National Conference Center, Changsha New Railway Station and the Xi＇an Northern Railway Station. The analytical and field test results show that the MTMD system designed using the proposed method is capable of effectively mitigating the vertical vibration of long-span floor structures. The study presented in this paper provides an important reference for the analysis of vibration serviceability of similar long-span floors and design of control system for these structures.
基金National Natural Science Foundation of China Under Grant No. 50725828 & No. 50808041Scientific Research Foundation of Graduate School of Southeast University Under Grant No. YBJJ1006Teaching and Research Foundation for Excellent Young Teacher of Southeast University
文摘The key points to consider in determining the effectiveness of using structural isolation with shape memory alloys （SMA） are the constitutive model, the SMA isolation device and the analysis method. In this paper, a simplified constitutive model based on the classic theory of plasticity is proposed to simulate the behavior of the superelasticity of the SMA, in which the martensite volume fraction is considered as one of the state variables. Comparisons between simulation results and experimental results are made and indicate that the proposed constitutive model yields stress-strain curves that are in good agreement with the experimental ones. Thus, the proposed model can correctly simulate the yield mechanism and energy dissipation capacity of the SMA. Next, in order to make full use of the superelasticity of SMA, a new SMA isolator composed of pre-tensioned SMA bars is presented. Then, a finite element analytical model is established to simulate the behavior of the SMA isolator according to its configuration and simplified constitutive model. Finally, a simplified design method for long-span structures installed with SMA isolators is proposed, which is further used to investigate the isolation effects of a space grid structure. Results show that the SMA isolator can reduce the seismic responses of the structure effectively, which indicates the effectiveness of the proposed SMA isolation method.
文摘The new technique that combines wave superposition with the fast Fourier transformation was introduced to simulate the nodal three-dimension relevant wind velocity time series of spatial structures. The wind velocity field where the spatial structure is located is assumed to be homogeneous. The wind’s power spectral density is divided into frequency spectral function and coherency function and the spectral functions are transformed as the superposition coefficients. The wavelet analysis has excellent localized characters in both time and frequency domains, which not only makes wind velocity time series analysis more accurate, but also can focus on any detail of the objective signal series. The discrete wavelet transformation was adopted to decompose and reconstruct the discrete wind velocity time series. The stability of wavelet analysis for the wind velocity time series was also proved.
基金the financial supports from National Key R&D Program for Young Scientists of China(Grant No.2022YFC3080900)National Natural Science Foundation of China(Grant No.52374181)+1 种基金BIT Research and Innovation Promoting Project(Grant No.2024YCXZ017)supported by Science and Technology Innovation Program of Beijing institute of technology under Grant No.2022CX01025。
文摘In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.
文摘Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.
基金Supported by the National Key Research and Development Program of Traditional Chinese Medicine Modernization Project,China(No.2023YFC3504000)the Science and Technology Development Project of Jilin Province,China(No.20240404043ZP)the Science and Technology Innovation Cooperation Project of Changchun Science and Technology Bureau and Chinese Academy of Sciences,China(No.23SH14)。
文摘In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented product FGPA-G 2-H on Aβ25-35-induced PC 12 cells were explored.The structure of GPA-G 2-H was determined by means of zeta potential analysis,FTIR,HPLC,XRD,GC-MS and NMR.The backbone of GPA-G 2-H was mainly composed of→4)-α-D-Glcp-(1→with branches substituted at O-3.Notably,GPA-G 2-H was degraded by intestinal microbiota in vitro with total sugar content and pH value decreasing,and short-chain fatty acids(SCFAs)increasing.Moreover,GPA-G 2-H significantly promoted the proliferation of Lactobacillus,Muribaculaceae and Weissella,thereby making positive alterations in intestinal microbiota composition.Additionally,FGPA-G 2-H activated the Nrf 2/HO-1 signaling pathway,enhanced HO-1,NQO 1,SOD and GSH-Px,while inhabited Keap 1,MDA and LDH,which alleviated Aβ-induced oxidative stress in PC 12 cells.These provide a solid theoretical basis for the further development of ginseng polysaccharides as functional food and antioxidant drugs.
文摘Two Co(Ⅱ)and Ni(Ⅱ)complexes were synthesized by synergistic coordination of 3,3-diphenylpropionic acid(HDPA)and 2,2′-bipyridylamine(PAm).The structures of complexes[Co(DPA)_(2)(PAm)]·2H_(2)O(1)and[Ni(DPA)_(2)(PAm)]·2H_(2)O(2)were determined by single-crystal X-ray diffraction,IR spectroscopy,and powder X-ray diffraction.Hirshfeld surface analysis provided quantitative insights into the intermolecular interactions within the complexes,while molecular docking studies elucidated their binding modes and affinities toward urease.Furthermore,the biological activities of both complexes were systematically evaluated through a range of assays,including DNA binding,urease inhibition,antibacterial activity,and in vitro cytotoxicity against cancer cells.Both complexes exhibited binding affinity for DNA and displayed notable urease inhibitory activity.Under in vitro conditions,both complexes showed appreciable cytotoxicity toward HepG2 cells with efficacy comparable to clinically used platinumbased anticancer agents.CCDC:2479943,1;2479944,2.
基金supported by the National Natural Science Foundation of China(Grant Nos.12432005 and 12472116)the Fundamental Research Funds for the Central Universities(DUTZD25240).
文摘Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimization method grounded in the global adjustment of nodal coordinates.First,a build direction is selected to minimize the number of violating struts.Then,an angular-constraint matrix is assembled from strut direction vectors,and analytical sensitivities with respect to nodal coordinates are derived to enable efficient constrained optimization under nonlinear angular inequality constraints.Numerical studies on two complex curved-surface lattices demonstrate that all overhang violations are eliminated while only minor changes are induced in global stiffness and strength.In particular,the maximum displacement of an ergonomic insole varies by only 2.87%after optimization.The results confirm the method’s versatility and engineering robustness,providing a practical approach for additive manufacturing-oriented lattice structure design.
基金National Natural Science Foundation of China(12372152)Guangdong Basic and Applied Basic Research Foundation(2023A1515011819,2024A1515012469)Shandong Provincial Natural Science Foundation(ZR2023MA058)。
文摘The core-shell structure in bulk TiNb binary alloy was designed and studied by phase-field simulations,where various core-shell structures were obtained by precise control of the initial and boundary conditions of the TiNb binary alloy system during spinodal decomposition,and then the formation mechanism of core-shell structure was revealed.In addition,the influences of initial temperature gradient,average temperature,and initial concentration distribution of the system on the core-shell structure were investigated.Results show that the initial concentration gradient is the key factor for forming the core-shell structure.Besides,larger initial temperature gradient and higher average temperature can promote the formation of core-shell structure,which can be stabilized by adjusting the initial concentration distribution of the Nb-rich region in TiNb binary alloy.As a theoretical basis,this research provides a novel and simple strategy for the preparation of TiNb-based alloys and other materials with peculiar core-shell structures and desirable mechanical and physical properties.
基金Doctoral Startup Fund(20192066,20212028)Laijin Excellent Doctoral Fund(20202021)+1 种基金Scientific and Technological Innovation of Colleges and Universities in Shanxi Province(2020L0342)Fundamental Research Program of Shanxi Province(202303021222178)。
文摘SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
基金supported by the National Key R&D Program of China(Grant No.2019YFC1509703)the Tianjin Science and Technology Program Project(Grant No.23YFYSHZ00130)。
文摘Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.
基金supported by the Khalifa University of Science and Technology internal grants(Nos.2021-CIRA-109,2020-CIRA-007,and 2020-CIRA-024).
文摘Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-inspired lattice structures feature a square-grid 2D lattice with double diagonal bracings and are additively manufactured via digital light processing(DLP).The collapse strength and energy absorption capacity of sea sponge lattice structures are evaluated under various impact conditions and are compared to those of their constituent square-grid and double diagonal lattices.This study demonstrates that sea sponge lattices can achieve an 11-fold increase in energy absorption compared to the square-grid lattice,due to the stabilizing effect of the double diagonal bracings prompting the structure to collapse layer-bylayer under impact.By adjusting the thickness ratio in the sea sponge lattice,up to 76.7%increment in energy absorption is attained.It is also shown that sea-sponge lattices outperform well-established energy-absorbing materials of equal weight,such as hexagonal honeycombs,confirming their significant potential for impact mitigation.Additionally,this research highlights the enhancements in energy absorption achieved by adding a small amount(0.015 phr)of Multi-Walled Carbon Nanotubes(MWCNTs)to the photocurable resin,thus unlocking new possibilities for the design of innovative lightweight structures with multifunctional attributes.
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
文摘The hydrated tricyclohexyltin theophylline-7-acetic acid(tpH)complex[Sn(C_(6)H_(11))_(3)(tp)(H_(2)O)]was synthesized via an ethanol solvothermal method using tricyclohexyltin hydroxide and tpH in a 1∶1 molar ratio.The complex was characterized by IR,^(1)H(^(13)C)NMR,elemental analysis,and powder X-ray diffraction,and the crystal structure was determined by single-crystal X-ray diffraction.The crystal belongs to the orthorhombic system with space group Iba2,and the central tin atom is in a five-coordinated trigonal bipyramidal configuration.Quantum chemistry ab initio calculations were performed to investigate the stability,molecular orbital energy,and frontier molecular orbital characteristics of the complex.Additionally,its thermal stability,electrochemical properties,and in vitro anticancer activity were evaluated.CCDC:2380308.
文摘AlGaN-based deep-ultraviolet(DUV)laser diodes(LDs)face performance challenges due to elec-tron leakage and poor hole injection which is often worsened by polarization effects from conventional elec-tron blocking layers(EBLs).To overcome these limitations,we propose an EBL-free DUV LD design incor-porating a 1-nm undoped Al_(0.8)Ga_(0.2)N thin strip layer after the last quantum barrier.Using PICS3D simula-tions,we evaluate the optical and electrical characteristics.Results show a significant increase in effective electron barrier height(from 158.2 meV to 420.7 meV)and a reduction in hole barrier height(from 149.2 meV to 62.8 meV),which enhance hole injection and reduce electron leakage.The optimized structure(LD3)achieves a 14%increase in output power,improved slope efficiency(1.85 W/A),and lower threshold current.This design also reduces the quantum confined Stark effect and forms dual hole accumulation regions,im-proving recombination efficiency.
文摘Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet little is known about its osteological development characteristics.Understanding these ontogenetic patterns is essential for explaining phylogenetic relationships within Clupeiformes,informing larval identification in ichthyoplankton surveys,and enhancing aquaculture practices.This study describes the ontogenetic characteristics of the appendicular and median skeletons and fin supports in E.punctifer larvae and juveniles,providing quantitative ontogenetic timelines to address gaps in engraulid developmental biology and contribute to teleost ontogeny research.Larval and juvenile specimens of E.punctifer;size range:3.00-34.56 mm standard length(SL)and notochord length(NL)collected from the Philippine Sea were processed using the standard Alizarin red and Alcian blue clearing-and-staining technique to differentiate ossified and cartilaginous elements.Specimens were examined under a stereo microscope and imaged with an HTC1600ISP digital camera for detailed morphological analysis of skeletal structures.Caudal complex development was evident by 5.55 mm NL,with the initial appearance of cartilaginous hypurals 1–2 and parhypural,followed by Hy3–5 at 6.08 mm NL.Cartilaginous Hy6 was visible by 9.58 mm SL in postflexion larvae.Six hypural bones were present from the postflexion to juvenile stage.Principal fin rays formed via intramembranous ossification at 6.32 mm NL,and segmentation was evident by 10.24 mm SL.Neural arch 1 appeared at 7.38 mm NL,preceding full haemal arch development.Uroneurals 1–2 and ural centra ossified by 9.58 mm SL,with Hy5 detached from U1 at 10.24 mm SL.Preural centra ossified before the arches.Epurals 1 and 2 were evident by 10.24 mm SL.Dorsal fin proximal radials developed anteriorly and distal radials posteriorly.Pectoral fin development initiated with an ossified cleithrum and the coracoscapular cartilage at 5.25 mm NL.By 10.24 mm SL,cartilaginous neural and haemal arches and spines were distinct.Uroneural 1 initially develops as cartilage.The formation of a pleurostyle aligns with clupeoid fish skeletal ontogeny.Dorsal and anal fin development follows a distinctive pattern,with variability in fin support development.Our results reveal accelerated caudal complex formation in E.punctifer and contribute new knowledge on the osteological characteristics of the genus Encrasicholina,and aid in understanding larval and juvenile ontogeny of marine teleosts.
文摘5,5'-dithiobis(2-nitrobenzoic acid)(H_(2)DTNB)was employed as the second ligand to react with cucurbit[6]uril(Q[6])and Cd(NO_(3))_(2),and it was deprotonated or transformed into HDTNB^(-),TNB^(2-)and NSB^(2-)(H_(2)TNB=5,5'-thiobis(2-nitrobenzoic acid),H_(2)NSB=2-nitro-5-sulfobenzoic acid)under different conditions to afford three novel supramolecular assemblies with the formulas of[Cd(H_(2)O)_(4)(Q[6])](HDTNB)_(2)·3H_(2)O(1),[Cd(H_(2)O)_(6)]_(2)(TNB)_(2)·Q[6]·4H_(2)O(2)and[Cd(H_(2)O)_(5)(NSB)]_(2)·Q[6](3).Singe-crystal diffraction(SC-XRD)analysis revealed that assembly 1 is constructed from 2D[Cd(H_(2)O)_(4)(Q[6])]2+supramolecular layers and HDTNB^(-)supra molecular layers,the structure of assembly 2 is comprised of the 2D{[Cd(H_(2)O)_(6)]_(2)·Q[6]}^(4+)supramolecular layers and 1D TNB^(2-)supramolecular chains,while assembly 3 is built from the 3D Q[6]frameworks with[Cd(H_(2)O)_(5)(NSB)]supramolecular chains filled in the pores.Meanwhile,the noncovalent interactions between the ligands HDTNB^(-)/TNB^(2-)/NSB^(2-)and the outer-surface of Q[6]molecules contributed greatly to the formation of the supramolecular architecture of assemblies 1-3.CCDC:2522253,1;2522254,2;2522255,3.
基金supported by the National Nature Science Foundation of China(82174531)the Medicine and Health Science Technology Development Project of Shandong Province,China(202212060626).
文摘Abuse of chloramphenicol(CAP)could cause serious side effects to human health.Therefore,it is necessary to detect CAP residues in animal sourced food effectively.Here,the superiority(better stability,higher Apt-CAP loading efficiency,and higher CAP binding associated conformational change,etc.)of tetrahedral structure to double-chained structure for developing aptasensor was evaluated.Then,a self-assembled DNA tetrahedral structure-based electrochemical aptasensor targeting CAP was developed.Under the optimized conditions,the aptasensor exhibited high sensitivity toward CAP with a limit of detection(LOD)of 0.0676 ng/m L(linear range 0.19-387.76 ng/m L),and high selectivity against the structural analogs of CAP.Moreover,the recovery rate of CAP from spiked milk samples ranged from 100.57%to 101.69%,and only USD 1.34 is needed for detecting CAP in 1 sample.These results suggested the application potential of this aptasesor for detecting CAP in animal sourced foods.
文摘Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.
