In real machining, the tool paths are composed of a series of short line segments, which constitute groups of sharp corners correspondingly leading to geometry discontinuity in tangent. As a result, high acceleration ...In real machining, the tool paths are composed of a series of short line segments, which constitute groups of sharp corners correspondingly leading to geometry discontinuity in tangent. As a result, high acceleration with high fluctuation usually occurs. If these kinds of tool paths are directly used for machining, the feedrate and quality will be greatly reduced. Thus, generating continuous tool paths is strongly desired. This paper presents a new error-controllable method for generating continuous tool path. Different from the traditional method focusing on fitting the cutter locations, the proposed method realizes globally smoothing the tool path in an error-controllable way. Concretely, it does the smoothing by approaching the newly produced curve to the linear tool path by taking the tolerance requirement as a constraint. That is, the error between the desired tool path and the G01 commands are taken as a boundary condition to ensure the finally smoothed curve being within the given tolerance. Besides, to improve the smoothing ability in case of small corner angle, an improved local smoothing method is also proposed by symmetrically assigning the control points to the two adjacent linear segments with the constrains of tolerance and G3 continuity. Experiments on an open five-axis machine are developed to verify the advantages of the proposed methods.展开更多
The extraction of spectral parameters is very difficult because of the limited energy resolution for NaI （TI） gamma-ray detectors. For statistical fluctuation of radioactivity under complex environment, some smoothi...The extraction of spectral parameters is very difficult because of the limited energy resolution for NaI （TI） gamma-ray detectors. For statistical fluctuation of radioactivity under complex environment, some smoothing filtering methods are proposed to solve the problem. These methods include adopting method of arithmetic moving average, center of gravity, least squares of polynomial, slide converter of discrete funcion convolution etc. The process of spectrum data is realized, and the results are assessed in H/FWHM（ Peak High/Full Width at Half Maximum） and peak area based on the Matlab programming. The results indicate that different methods smoothed spectrum have respective superiority in different ergoregion, but the Gaussian function theory in discrete function convolution slide method is used to filter the complex y-spectrum on Embedded system nlatform, and the statistical fluctuation of y-snectrum filtered wall.展开更多
The box constrained variational inequality problem can be reformulated as a nonsmooth equation by using median operator.In this paper,we present a smoothing Newton method for solving the box constrained variational in...The box constrained variational inequality problem can be reformulated as a nonsmooth equation by using median operator.In this paper,we present a smoothing Newton method for solving the box constrained variational inequality problem based on a new smoothing approximation function.The proposed algorithm is proved to be well defined and convergent globally under weaker conditions.展开更多
Utilizing the well-known aggregation technique, we propose a smoothing sample average approximation （SAA） method for a stochastic linear complementarity problem, where the underlying functions are represented by exp...Utilizing the well-known aggregation technique, we propose a smoothing sample average approximation （SAA） method for a stochastic linear complementarity problem, where the underlying functions are represented by expectations of stochastic functions. The method is proved to be convergent and the preliminary numerical results are reported.展开更多
In this paper, an approximate smoothing approach to the non-differentiable exact penalty function is proposed for the constrained optimization problem. A simple smoothed penalty algorithm is given, and its convergence...In this paper, an approximate smoothing approach to the non-differentiable exact penalty function is proposed for the constrained optimization problem. A simple smoothed penalty algorithm is given, and its convergence is discussed. A practical algorithm to compute approximate optimal solution is given as well as computational experiments to demonstrate its efficiency.展开更多
<div style="text-align:justify;"> In order to speed up the global optimization-based mesh smoothing, an enhanced steepest descent method is presented in the paper. Numerical experiment results show tha...<div style="text-align:justify;"> In order to speed up the global optimization-based mesh smoothing, an enhanced steepest descent method is presented in the paper. Numerical experiment results show that the method performs better than the steepest descent method in the global smoothing. We also presented a physically-based interpretation to explain why the method works better than the steepest descent method. </div>展开更多
A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FE...A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FEM is described and compared with ES-FEM.A practical modification of IES-FEM is then introduced that used the technique employed by ES-FEM for the nodal strain calculation.The differences in the strain computation among ES-FEM,IES-FEM,and FEM are then discussed.The modified IES-FEM exhibited superior performance in displacement and a slight advantage in stress compared to FEM using the same mesh according to the results obtained from both the regular and irregular elements.The robustness of the IES-FEM to severely deformed meshes was also verified.展开更多
The traditional topology optimization method of continuum structure generally uses quadrilateral elements as the basic mesh.This approach often leads to jagged boundary issues,which are traditionally addressed through...The traditional topology optimization method of continuum structure generally uses quadrilateral elements as the basic mesh.This approach often leads to jagged boundary issues,which are traditionally addressed through post-processing,potentially altering the mechanical properties of the optimized structure.A topology optimization method of Movable Morphable Smooth Boundary(MMSB)is proposed based on the idea of mesh adaptation to solve the problem of jagged boundaries and the influence of post-processing.Based on the ICM method,the rational fraction function is introduced as the filtering function,and a topology optimization model with the minimum weight as the objective and the displacement as the constraint is established.A triangular mesh is utilized as the base mesh in this method.The mesh is re-divided in the optimization process based on the contour line,and a smooth boundary parallel to the contour line is obtained.Numerical examples demonstrate that the MMSB method effectively resolves the jagged boundary issues,leading to enhanced structural performance.展开更多
A discontinuous smoothed particle hydrodynamics(DSPH)method considering block contacts is originally developed to model the cracking,frictional slip and large deformation in rock masses,and is verified by theoretical,...A discontinuous smoothed particle hydrodynamics(DSPH)method considering block contacts is originally developed to model the cracking,frictional slip and large deformation in rock masses,and is verified by theoretical,numerical and/or experimental results.In the DSPH method,cracking is realized by breaking the virtual bonds via a pseudo-spring method based on Mohr–Coulomb failure criteria.The damaged particles are instantaneously replaced by discontinuous particles and the contact bond between the original and discontinuous particles is formed to simulate the frictional slip and separation/contraction between fracture surfaces based on the block contact algorithm.The motion of rock blocks and the contact force of discontinuous particles are determined following Newton's second law.The results indicate that the DSPH method precisely captures the cracking,contact formation and complete failure across six numerical benchmark tests.This single smoothed particle hydrodynamics(SPH)framework could significantly improve computational efficiency and is potentially applicable to broad multi-physical rock engineering problems of different scales.展开更多
We present a hybrid smoothed particle magnetohydrodynamics(SPMHD)code integrating smoothed particle hydrodynamics(SPH)and finite element methods(FEM)to simulate coupled fluid-electromagnetic phenomena.The framework em...We present a hybrid smoothed particle magnetohydrodynamics(SPMHD)code integrating smoothed particle hydrodynamics(SPH)and finite element methods(FEM)to simulate coupled fluid-electromagnetic phenomena.The framework employs SPH for fluid dynamics,addressing large deformations,shocks,and plasma behavior,while FEM resolves electromagnetic fields via Maxwell's equations for magnetic vector and electric scalar potentials,ensuring divergence-free conditions and global current density calculations in conductive region.Operator splitting method couples these modules,enabling real-time integration of magnetic,electric,thermal,and fluid fields.Benchmark tests validate the code against analytical solutions and existing models,including blow-by instability simulations that demonstrate the method's accuracy in capturing fluid-magnetic interactions.Designed for 3D applications,SPMHD offers robust scalability across multiprocessor architectures,establishing it as a versatile tool for plasma physics research.展开更多
A one_step smoothing Newton method is proposed for solving the vertical linear complementarity problem based on the so_called aggregation function. The proposed algorithm has the following good features: (ⅰ) It solve...A one_step smoothing Newton method is proposed for solving the vertical linear complementarity problem based on the so_called aggregation function. The proposed algorithm has the following good features: (ⅰ) It solves only one linear system of equations and does only one line search at each iteration; (ⅱ) It is well_defined for the vertical linear complementarity problem with vertical block P 0 matrix and any accumulation point of iteration sequence is its solution.Moreover, the iteration sequence is bounded for the vertical linear complementarity problem with vertical block P 0+R 0 matrix; (ⅲ) It has both global linear and local quadratic convergence without strict complementarity. Many existing smoothing Newton methods do not have the property (ⅲ).展开更多
The extended linear complementarity problem(denoted by ELCP) can be reformulated as the solution of a nonsmooth system of equations. By the symmetrically perturbed CHKS smoothing function, the ELCP is approximated by ...The extended linear complementarity problem(denoted by ELCP) can be reformulated as the solution of a nonsmooth system of equations. By the symmetrically perturbed CHKS smoothing function, the ELCP is approximated by a family of parameterized smooth equations. A one-step smoothing Newton method is designed for solving the ELCP. The proposed algorithm is proved to be globally convergent under suitable assumptions.展开更多
In this paper, we study about a method to optimize the fused track quality in intelligence network of radar target fusion system, considering the role of people in the fusion system;we start to find ways to optimize t...In this paper, we study about a method to optimize the fused track quality in intelligence network of radar target fusion system, considering the role of people in the fusion system;we start to find ways to optimize the quality of the fused track, and adaptive smoothing method is proposed based on fuzzy theory. Tests show that this method can greatly improve the quality of the fused track system for battlefield reconnaissance provides high-quality, high-reliability battlefield.展开更多
Based on a smoothing symmetric disturbance FB-function,a smoothing inexact Newton method for solving the nonlinear complementarity problem with P0-function was proposed.It was proved that under mild conditions,the giv...Based on a smoothing symmetric disturbance FB-function,a smoothing inexact Newton method for solving the nonlinear complementarity problem with P0-function was proposed.It was proved that under mild conditions,the given algorithm performed global and superlinear convergence without strict complementarity.For the same linear complementarity problem(LCP),the algorithm needs similar iteration times to the literature.However,its accuracy is improved by at least 4 orders with calculation time reduced by almost 50%,and the iterative number is insensitive to the size of the LCP.Moreover,fewer iterations and shorter time are required for solving the problem by using inexact Newton methods for different initial points.展开更多
In this paper, a class of smoothing modulus-based iterative method was presented for solving implicit complementarity problems. The main idea was to transform the implicit complementarity problem into an equivalent im...In this paper, a class of smoothing modulus-based iterative method was presented for solving implicit complementarity problems. The main idea was to transform the implicit complementarity problem into an equivalent implicit fixed-point equation, then introduces a smoothing function to obtain its approximation solutions. The convergence analysis of the algorithm was given, and the efficiency of the algorithms was verified by numerical experiments.展开更多
In this work, we further extended the face-based smoothed finite element method （FS-FEM） for modal analysis of three-dimensional solids using four-node tetrahedron elements. The FS-FEM is formulated based on the smo...In this work, we further extended the face-based smoothed finite element method （FS-FEM） for modal analysis of three-dimensional solids using four-node tetrahedron elements. The FS-FEM is formulated based on the smoothed Calerkin weak form which employs smoothed strains obtained using the gradient smoothing operation on face-based smoothing domains. This strain smoothing operation can provide softening effect to the system stiffness and make the FSFEM provide more accurate eigenfrequency prediction than the FEM does. Numerical studies have verified this attractive property of FS-FEM as well as its ability and effectiveness on providing reliable eigenfrequency and eigenmode prediction in practical engineering application.展开更多
In this paper, we present a nonmonotone smoothing Newton algorithm for solving the circular cone programming(CCP) problem in which a linear function is minimized or maximized over the intersection of an affine space w...In this paper, we present a nonmonotone smoothing Newton algorithm for solving the circular cone programming(CCP) problem in which a linear function is minimized or maximized over the intersection of an affine space with the circular cone. Based on the relationship between the circular cone and the second-order cone(SOC), we reformulate the CCP problem as the second-order cone problem(SOCP). By extending the nonmonotone line search for unconstrained optimization to the CCP, a nonmonotone smoothing Newton method is proposed for solving the CCP. Under suitable assumptions, the proposed algorithm is shown to be globally and locally quadratically convergent. Some preliminary numerical results indicate the effectiveness of the proposed algorithm for solving the CCP.展开更多
In this article,a procedure for estimating the coefficient functions on the functional-coefficient regression models with different smoothing variables in different coefficient functions is defined.First step,by the l...In this article,a procedure for estimating the coefficient functions on the functional-coefficient regression models with different smoothing variables in different coefficient functions is defined.First step,by the local linear technique and the averaged method,the initial estimates of the coefficient functions are given.Second step,based on the initial estimates,the efficient estimates of the coefficient functions are proposed by a one-step back-fitting procedure.The efficient estimators share the same asymptotic normalities as the local linear estimators for the functional-coefficient models with a single smoothing variable in different functions.Two simulated examples show that the procedure is effective.展开更多
A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(F...A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(FGMEE)structures.By introducing the modified Newmark method,the displacement,electrical potential and magnetic potential of the structures under transient mechanical loading were obtained.Based on G space theory and the weakened weak(W2)formulation,the equations of the multi-physics coupling problems were derived.Using triangular background elements,the free vibration and transient responses of three numerical examples were studied.Results proved that CM-NS-RPIM performed better than the standard FEM by reducing the overly-stiff of structures.Moreover,CM-NS-RPIM could reduce the number of nodes while guaranteeing the accuracy.Besides,triangular elements could be generated automatically even for complex geometries.Therefore,the effectiveness and validity of CM-NS-RPIM were demonstrated,which were valuable for the design of intelligence devices,such as energy harvesters and sensors.展开更多
Data sparseness has been an inherited issue of statistical language models and smoothing method is usually used to resolve the zero count problems. In this paper, we studied empirically and analyzed the well-known smo...Data sparseness has been an inherited issue of statistical language models and smoothing method is usually used to resolve the zero count problems. In this paper, we studied empirically and analyzed the well-known smoothing methods of Good-Turing and advanced Good-Turing for language models on large sizes Chinese corpus. In the paper, ten models are generated sequentially on various size of corpus, from 30 M to 300 M Chinese words of CGW corpus. In our experiments, the smoothing methods;Good-Turing and Advanced Good-Turing smoothing are evaluated on inside testing and outside testing. Based on experiments results, we analyzed further the trends of perplexity of smoothing methods, which are useful for employing the effective smoothing methods to alleviate the issue of data sparseness on various sizes of language models. Finally, some helpful observations are described in detail.展开更多
基金supported by the National Natural Science Foundation of China under Grant Nos.51675440 and 11620101002National Key Research and Development Program of China under Grant No.2017YFB1102800the Fundamental Research Funds for the Central Universities under Grant No.3102018gxc025
文摘In real machining, the tool paths are composed of a series of short line segments, which constitute groups of sharp corners correspondingly leading to geometry discontinuity in tangent. As a result, high acceleration with high fluctuation usually occurs. If these kinds of tool paths are directly used for machining, the feedrate and quality will be greatly reduced. Thus, generating continuous tool paths is strongly desired. This paper presents a new error-controllable method for generating continuous tool path. Different from the traditional method focusing on fitting the cutter locations, the proposed method realizes globally smoothing the tool path in an error-controllable way. Concretely, it does the smoothing by approaching the newly produced curve to the linear tool path by taking the tolerance requirement as a constraint. That is, the error between the desired tool path and the G01 commands are taken as a boundary condition to ensure the finally smoothed curve being within the given tolerance. Besides, to improve the smoothing ability in case of small corner angle, an improved local smoothing method is also proposed by symmetrically assigning the control points to the two adjacent linear segments with the constrains of tolerance and G3 continuity. Experiments on an open five-axis machine are developed to verify the advantages of the proposed methods.
基金Sponsored by the Natural Science Fundation of Jiangxi Province(Grant No.20114BAB211026 and 20122BAB201028)the Open Science Fund from Key Laboratory of Radioactive Geology and Exploration Technology Fundamental Science for National Defense,East China Institute of Technology(Grant No.2010RGET11)
文摘The extraction of spectral parameters is very difficult because of the limited energy resolution for NaI （TI） gamma-ray detectors. For statistical fluctuation of radioactivity under complex environment, some smoothing filtering methods are proposed to solve the problem. These methods include adopting method of arithmetic moving average, center of gravity, least squares of polynomial, slide converter of discrete funcion convolution etc. The process of spectrum data is realized, and the results are assessed in H/FWHM（ Peak High/Full Width at Half Maximum） and peak area based on the Matlab programming. The results indicate that different methods smoothed spectrum have respective superiority in different ergoregion, but the Gaussian function theory in discrete function convolution slide method is used to filter the complex y-spectrum on Embedded system nlatform, and the statistical fluctuation of y-snectrum filtered wall.
基金Supported by the NNSF of China（11071041）Supported by the Fujian Natural Science Foundation（2009J01002）Supported by the Fujian Department of Education Foundation（JA11270）
文摘The box constrained variational inequality problem can be reformulated as a nonsmooth equation by using median operator.In this paper,we present a smoothing Newton method for solving the box constrained variational inequality problem based on a new smoothing approximation function.The proposed algorithm is proved to be well defined and convergent globally under weaker conditions.
文摘Utilizing the well-known aggregation technique, we propose a smoothing sample average approximation （SAA） method for a stochastic linear complementarity problem, where the underlying functions are represented by expectations of stochastic functions. The method is proved to be convergent and the preliminary numerical results are reported.
文摘In this paper, an approximate smoothing approach to the non-differentiable exact penalty function is proposed for the constrained optimization problem. A simple smoothed penalty algorithm is given, and its convergence is discussed. A practical algorithm to compute approximate optimal solution is given as well as computational experiments to demonstrate its efficiency.
文摘<div style="text-align:justify;"> In order to speed up the global optimization-based mesh smoothing, an enhanced steepest descent method is presented in the paper. Numerical experiment results show that the method performs better than the steepest descent method in the global smoothing. We also presented a physically-based interpretation to explain why the method works better than the steepest descent method. </div>
基金the National Natural Science Foundation of China(No.11672238)the 111 Project(No.BP0719007)the Shaanxi Province Natural Science Foundation(No.2020JZ-06)for the financial support.
文摘A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FEM is described and compared with ES-FEM.A practical modification of IES-FEM is then introduced that used the technique employed by ES-FEM for the nodal strain calculation.The differences in the strain computation among ES-FEM,IES-FEM,and FEM are then discussed.The modified IES-FEM exhibited superior performance in displacement and a slight advantage in stress compared to FEM using the same mesh according to the results obtained from both the regular and irregular elements.The robustness of the IES-FEM to severely deformed meshes was also verified.
基金supported by the National Natural Science Foundation of China(Grant 12472113).
文摘The traditional topology optimization method of continuum structure generally uses quadrilateral elements as the basic mesh.This approach often leads to jagged boundary issues,which are traditionally addressed through post-processing,potentially altering the mechanical properties of the optimized structure.A topology optimization method of Movable Morphable Smooth Boundary(MMSB)is proposed based on the idea of mesh adaptation to solve the problem of jagged boundaries and the influence of post-processing.Based on the ICM method,the rational fraction function is introduced as the filtering function,and a topology optimization model with the minimum weight as the objective and the displacement as the constraint is established.A triangular mesh is utilized as the base mesh in this method.The mesh is re-divided in the optimization process based on the contour line,and a smooth boundary parallel to the contour line is obtained.Numerical examples demonstrate that the MMSB method effectively resolves the jagged boundary issues,leading to enhanced structural performance.
基金financial support from the National Key Research and Development Program of China(Grant No.2019YFC1509702)the Fundamental Research Funds for the Central Universities in Chinathe National Natural Science Foundation of China(Grant No.42377162).
文摘A discontinuous smoothed particle hydrodynamics(DSPH)method considering block contacts is originally developed to model the cracking,frictional slip and large deformation in rock masses,and is verified by theoretical,numerical and/or experimental results.In the DSPH method,cracking is realized by breaking the virtual bonds via a pseudo-spring method based on Mohr–Coulomb failure criteria.The damaged particles are instantaneously replaced by discontinuous particles and the contact bond between the original and discontinuous particles is formed to simulate the frictional slip and separation/contraction between fracture surfaces based on the block contact algorithm.The motion of rock blocks and the contact force of discontinuous particles are determined following Newton's second law.The results indicate that the DSPH method precisely captures the cracking,contact formation and complete failure across six numerical benchmark tests.This single smoothed particle hydrodynamics(SPH)framework could significantly improve computational efficiency and is potentially applicable to broad multi-physical rock engineering problems of different scales.
基金supported by the Major National Science and Technology Infrastructure(No.2208-000000-04-01249628)the Shanghai Science and Technology Commission(No.21DZ1206500)。
文摘We present a hybrid smoothed particle magnetohydrodynamics(SPMHD)code integrating smoothed particle hydrodynamics(SPH)and finite element methods(FEM)to simulate coupled fluid-electromagnetic phenomena.The framework employs SPH for fluid dynamics,addressing large deformations,shocks,and plasma behavior,while FEM resolves electromagnetic fields via Maxwell's equations for magnetic vector and electric scalar potentials,ensuring divergence-free conditions and global current density calculations in conductive region.Operator splitting method couples these modules,enabling real-time integration of magnetic,electric,thermal,and fluid fields.Benchmark tests validate the code against analytical solutions and existing models,including blow-by instability simulations that demonstrate the method's accuracy in capturing fluid-magnetic interactions.Designed for 3D applications,SPMHD offers robust scalability across multiprocessor architectures,establishing it as a versatile tool for plasma physics research.
文摘A one_step smoothing Newton method is proposed for solving the vertical linear complementarity problem based on the so_called aggregation function. The proposed algorithm has the following good features: (ⅰ) It solves only one linear system of equations and does only one line search at each iteration; (ⅱ) It is well_defined for the vertical linear complementarity problem with vertical block P 0 matrix and any accumulation point of iteration sequence is its solution.Moreover, the iteration sequence is bounded for the vertical linear complementarity problem with vertical block P 0+R 0 matrix; (ⅲ) It has both global linear and local quadratic convergence without strict complementarity. Many existing smoothing Newton methods do not have the property (ⅲ).
基金Supported by the NNSF of China(11071041, 11171257)
文摘The extended linear complementarity problem(denoted by ELCP) can be reformulated as the solution of a nonsmooth system of equations. By the symmetrically perturbed CHKS smoothing function, the ELCP is approximated by a family of parameterized smooth equations. A one-step smoothing Newton method is designed for solving the ELCP. The proposed algorithm is proved to be globally convergent under suitable assumptions.
文摘In this paper, we study about a method to optimize the fused track quality in intelligence network of radar target fusion system, considering the role of people in the fusion system;we start to find ways to optimize the quality of the fused track, and adaptive smoothing method is proposed based on fuzzy theory. Tests show that this method can greatly improve the quality of the fused track system for battlefield reconnaissance provides high-quality, high-reliability battlefield.
基金Supported by the National Natural Science Foundation of China(No.51205286)
文摘Based on a smoothing symmetric disturbance FB-function,a smoothing inexact Newton method for solving the nonlinear complementarity problem with P0-function was proposed.It was proved that under mild conditions,the given algorithm performed global and superlinear convergence without strict complementarity.For the same linear complementarity problem(LCP),the algorithm needs similar iteration times to the literature.However,its accuracy is improved by at least 4 orders with calculation time reduced by almost 50%,and the iterative number is insensitive to the size of the LCP.Moreover,fewer iterations and shorter time are required for solving the problem by using inexact Newton methods for different initial points.
文摘In this paper, a class of smoothing modulus-based iterative method was presented for solving implicit complementarity problems. The main idea was to transform the implicit complementarity problem into an equivalent implicit fixed-point equation, then introduces a smoothing function to obtain its approximation solutions. The convergence analysis of the algorithm was given, and the efficiency of the algorithms was verified by numerical experiments.
基金Project supported by the National Project 973 (No. 2010CB328005)the National Natural Science Foundation of China (No. 11202074)+2 种基金partially supported by the Open Research Fund Program of the State Key Laboratory of Advanced Technology of Design and Manufacturing for Vehicle Body, Hunan University, P. R. China (No. 31175002)the support of Centre for ACES, Singapore-MIT Alliance (SMA)National University of Singapore for the work
文摘In this work, we further extended the face-based smoothed finite element method （FS-FEM） for modal analysis of three-dimensional solids using four-node tetrahedron elements. The FS-FEM is formulated based on the smoothed Calerkin weak form which employs smoothed strains obtained using the gradient smoothing operation on face-based smoothing domains. This strain smoothing operation can provide softening effect to the system stiffness and make the FSFEM provide more accurate eigenfrequency prediction than the FEM does. Numerical studies have verified this attractive property of FS-FEM as well as its ability and effectiveness on providing reliable eigenfrequency and eigenmode prediction in practical engineering application.
基金supported by the National Natural Science Foundation of China(11401126,71471140 and 11361018)Guangxi Natural Science Foundation(2016GXNSFBA380102 and 2014GXNSFFA118001)+2 种基金Guangxi Key Laboratory of Cryptography and Information Security(GCIS201618)Guangxi Key Laboratory of Automatic Detecting Technology and Instruments(YQ15112 and YQ16112)China
文摘In this paper, we present a nonmonotone smoothing Newton algorithm for solving the circular cone programming(CCP) problem in which a linear function is minimized or maximized over the intersection of an affine space with the circular cone. Based on the relationship between the circular cone and the second-order cone(SOC), we reformulate the CCP problem as the second-order cone problem(SOCP). By extending the nonmonotone line search for unconstrained optimization to the CCP, a nonmonotone smoothing Newton method is proposed for solving the CCP. Under suitable assumptions, the proposed algorithm is shown to be globally and locally quadratically convergent. Some preliminary numerical results indicate the effectiveness of the proposed algorithm for solving the CCP.
文摘In this article,a procedure for estimating the coefficient functions on the functional-coefficient regression models with different smoothing variables in different coefficient functions is defined.First step,by the local linear technique and the averaged method,the initial estimates of the coefficient functions are given.Second step,based on the initial estimates,the efficient estimates of the coefficient functions are proposed by a one-step back-fitting procedure.The efficient estimators share the same asymptotic normalities as the local linear estimators for the functional-coefficient models with a single smoothing variable in different functions.Two simulated examples show that the procedure is effective.
基金co-supported by the National Key R&D Program of China(Nos.2018YFF01012401-05)the National Natural Science Foundation of China(No.51975243)+2 种基金Jilin Provincial Department of Education(No.JJKH20180084KJ),Chinathe Fundamental Research Funds for the Central Universities and Jilin Provincial Department of Science&Technology Fund Project,China(Nos.20170101043JC and 20180520072JH)Graduate Innovation Fund of Jilin University,China(No.101832018C184).
文摘A Coupling Magneto-Electro-Elastic(MEE)Node-based Smoothed Radial Point Interpolation Method(CM-NS-RPIM)was proposed to solve the free vibration and transient responses of Functionally Graded Magneto-Electro-Elastic(FGMEE)structures.By introducing the modified Newmark method,the displacement,electrical potential and magnetic potential of the structures under transient mechanical loading were obtained.Based on G space theory and the weakened weak(W2)formulation,the equations of the multi-physics coupling problems were derived.Using triangular background elements,the free vibration and transient responses of three numerical examples were studied.Results proved that CM-NS-RPIM performed better than the standard FEM by reducing the overly-stiff of structures.Moreover,CM-NS-RPIM could reduce the number of nodes while guaranteeing the accuracy.Besides,triangular elements could be generated automatically even for complex geometries.Therefore,the effectiveness and validity of CM-NS-RPIM were demonstrated,which were valuable for the design of intelligence devices,such as energy harvesters and sensors.
文摘Data sparseness has been an inherited issue of statistical language models and smoothing method is usually used to resolve the zero count problems. In this paper, we studied empirically and analyzed the well-known smoothing methods of Good-Turing and advanced Good-Turing for language models on large sizes Chinese corpus. In the paper, ten models are generated sequentially on various size of corpus, from 30 M to 300 M Chinese words of CGW corpus. In our experiments, the smoothing methods;Good-Turing and Advanced Good-Turing smoothing are evaluated on inside testing and outside testing. Based on experiments results, we analyzed further the trends of perplexity of smoothing methods, which are useful for employing the effective smoothing methods to alleviate the issue of data sparseness on various sizes of language models. Finally, some helpful observations are described in detail.
