In order to determine an appropriate sampling strategy for the effective conservation of wild soybean (Glycine soja Sieb. et Zucc.) in China, a natural population from Jiangwan Airport in Shanghai was studied for its ...In order to determine an appropriate sampling strategy for the effective conservation of wild soybean (Glycine soja Sieb. et Zucc.) in China, a natural population from Jiangwan Airport in Shanghai was studied for its genetic diversity through the inter-simple sequence repeat (ISSR) marker analysis of a sample set consisting of 100 randomly collected individuals. A relatively large genetic diversity was detected among the samples based on estimation of DNA products amplified from 15 selected ISSR primers, with the similarity coefficient varying from 0.17 to 0.89. The mean expected heterozygosity (He) was 0.171 4 per locus, and Shannon index (1) was 0.271 4. The Principal Coordinate Analysis (PCA) further indicated that genetic diversity of the Jiangwan wild soybean population was not evenly distributed, instead, was presented by a mosaic or clustered distribution pattern. Correlation study between genetic diversity and number of samples demonstrated that genetic diversity increased dramatically with the increase of number of samples within 40 individuals, but the increase became slow and rapidly reached a plateau when more than 40 individuals were included in the analysis. It is concluded that (i) a sample set of approximately 35-45 individuals should be included to represent possibly high genetic diversity when conservation of a wild soybean population ex situ is undertaken; and (ii) collection of wild soybean samples should be spread out as wide as possible within a population, and a certain distance should be kept as intervals among individuals for sampling.展开更多
Field nutrient distribution maps obtained from the study on soil variations within fields are the basis of precision agriculture. The quality of these maps for management depends on the accuracy of the predicted value...Field nutrient distribution maps obtained from the study on soil variations within fields are the basis of precision agriculture. The quality of these maps for management depends on the accuracy of the predicted values, which depends on the initial sampling. To produce reliable predictions efficiently the minimal sampling size and combination should be decided firstly, which could avoid the misspent funds for field sampling work. A 7.9 hectare silage field close to the Agricultural Research institute at Hillsborough, Northern Ireland, was selected for the study. Soil samples were collected from the field at 25 m intervals in a rectangular grid to provide a database of selected soil properties. Different data combinations were subsequently abstracted from this database for comparison purposes, and ordinary kriging used to produce interpolated soil maps. These predicted data groups were compared using least significant difference (LSD) test method. The results showed that the 62 sampling sizes of triangle arrangement for soil available K were sufficient to reach the required accuracy. The triangular sample combination proved to be superior to a rectangular one of similar sample size.展开更多
The aim of this study is to investigate the impacts of the sampling strategy of landslide and non-landslide on the performance of landslide susceptibility assessment(LSA).The study area is the Feiyun catchment in Wenz...The aim of this study is to investigate the impacts of the sampling strategy of landslide and non-landslide on the performance of landslide susceptibility assessment(LSA).The study area is the Feiyun catchment in Wenzhou City,Southeast China.Two types of landslides samples,combined with seven non-landslide sampling strategies,resulted in a total of 14 scenarios.The corresponding landslide susceptibility map(LSM)for each scenario was generated using the random forest model.The receiver operating characteristic(ROC)curve and statistical indicators were calculated and used to assess the impact of the dataset sampling strategy.The results showed that higher accuracies were achieved when using the landslide core as positive samples,combined with non-landslide sampling from the very low zone or buffer zone.The results reveal the influence of landslide and non-landslide sampling strategies on the accuracy of LSA,which provides a reference for subsequent researchers aiming to obtain a more reasonable LSM.展开更多
Environmental DNA(eDNA)integrated with metabarcoding is a promising and powerful tool for species composition and biodiversity assessment in aquatic ecosystems and is increasingly applied to evaluate fish diversity.To...Environmental DNA(eDNA)integrated with metabarcoding is a promising and powerful tool for species composition and biodiversity assessment in aquatic ecosystems and is increasingly applied to evaluate fish diversity.To date,however,no standardized eDNA-based protocol has been established to monitor fish diversity.In this study,we investigated and compared two filtration methods and three DNA extraction methods using three filtration water volumes to determine a suitable approach for eDNA-based fish diversity monitoring in the Pearl River Estuary(PRE),a highly anthropogenically disturbed estuarine ecosystem.Compared to filtration-based precipitation,direct filtration was a more suitable method for eDNA metabarcoding in the PRE.The combined use of DNeasy Blood and Tissue Kit(BT)and traditional phenol/chloroform(PC)extraction produced higher DNA yields,amplicon sequence variants(ASVs),and Shannon diversity indices,and generated more homogeneous and consistent community composition among replicates.Compared to the other combined protocols,the PC and BT methods obtained better species detection,higher fish diversity,and greater consistency for the filtration water volumes of 1000 and 2000 mL,respectively.All eDNA metabarcoding protocols were more sensitive than bottom trawling in the PRE fish surveys and combining two techniques yielded greater taxonomic diversity.Furthermore,combining traditional methods with eDNA analysis enhanced accuracy.These results indicate that methodological decisions related to eDNA metabarcoding should be made with caution for fish community monitoring in estuarine ecosystems.展开更多
The quality of debris flow susceptibility mapping varies with sampling strategies. This paper aims at comparing three sampling strategies and determining the optimal one to sample the debris flow watersheds. The three...The quality of debris flow susceptibility mapping varies with sampling strategies. This paper aims at comparing three sampling strategies and determining the optimal one to sample the debris flow watersheds. The three sampling strategies studied were the centroid of the scarp area(COSA), the centroid of the flowing area(COFA), and the centroid of the accumulation area(COAA) of debris flow watersheds. An inventory consisting of 150 debris flow watersheds and 12 conditioning factors were prepared for research. Firstly, the information gain ratio(IGR) method was used to analyze the predictive ability of the conditioning factors. Subsequently, 12 conditioning factors were involved in the modeling of artificial neural network(ANN), random forest(RF) and support vector machine(SVM). Then, the receiver operating characteristic curves(ROC) and the area under curves(AUC) were used to evaluate the model performance. Finally, a scoring system was used to score the quality of the debris flow susceptibility maps. Samples obtained from the accumulation area have the strongest predictive ability and can make the models achieve the best performance. The AUC values corresponding to the best model performance on the validation dataset were 0.861, 0.804 and 0.856 for SVM, ANN and RF respectively. The sampling strategy of the centroid of the scarp area is optimal with the highest quality of debris flow susceptibility maps having scores of 373470, 393241 and 362485 for SVM, ANN and RF respectively.展开更多
Background：Depending on tree and site characteristics crown biomass accounts for a significant portion of the total aboveground biomass in the tree.Crown biomass estimation is useful for different purposes including ...Background：Depending on tree and site characteristics crown biomass accounts for a significant portion of the total aboveground biomass in the tree.Crown biomass estimation is useful for different purposes including evaluating the economic feasibility of crown utilization for energy production or forest products,fuel load assessments and fire management strategies,and wildfire modeling.However,crown biomass is difficult to predict because of the variability within and among species and sites.Thus the allometric equations used for predicting crown biomass should be based on data collected with precise and unbiased sampling strategies.In this study,we evaluate the performance different sampling strategies to estimate crown biomass and to evaluate the effect of sample size in estimating crown biomass.Methods：Using data collected from 20 destructively sampled trees,we evaluated 11 different sampling strategies using six evaluation statistics：bias,relative bias,root mean square error（RMSE）,relative RMSE,amount of biomass sampled,and relative biomass sampled.We also evaluated the performance of the selected sampling strategies when different numbers of branches（3,6,9,and 12）are selected from each tree.Tree specific log linear model with branch diameter and branch length as covariates was used to obtain individual branch biomass.Results：Compared to all other methods stratified sampling with probability proportional to size estimation technique produced better results when three or six branches per tree were sampled.However,the systematic sampling with ratio estimation technique was the best when at least nine branches per tree were sampled.Under the stratified sampling strategy,selecting unequal number of branches per stratum produced approximately similar results to simple random sampling,but it further decreased RMSE when information on branch diameter is used in the design and estimation phases.Conclusions：Use of auxiliary information in design or estimation phase reduces the RMSE produced by a sampling strategy.However,this is attained by having to sample larger amount of biomass.Based on our finding we would recommend sampling nine branches per tree to be reasonably efficient and limit the amount of fieldwork.展开更多
Multi-objective optimization(MOO)for the microwave metamaterial absorber(MMA)normally adopts evolutionary algo-rithms,and these optimization algorithms require many objec-tive function evaluations.To remedy this issue...Multi-objective optimization(MOO)for the microwave metamaterial absorber(MMA)normally adopts evolutionary algo-rithms,and these optimization algorithms require many objec-tive function evaluations.To remedy this issue,a surrogate-based MOO algorithm is proposed in this paper where Kriging models are employed to approximate objective functions.An efficient sampling strategy is presented to sequentially capture promising samples in the design region for exact evaluations.Firstly,new sample points are generated by the MOO on surro-gate models.Then,new samples are captured by exploiting each objective function.Furthermore,a weighted sum of the improvement of hypervolume(IHV)and the distance to sampled points is calculated to select the new sample.Compared with two well-known MOO algorithms,the proposed algorithm is vali-dated by benchmark problems.In addition,two broadband MMAs are applied to verify the feasibility and efficiency of the proposed algorithm.展开更多
In the task of Facial Expression Recognition(FER),data uncertainty has been a critical factor affecting performance,typically arising from the ambiguity of facial expressions,low-quality images,and the subjectivity of...In the task of Facial Expression Recognition(FER),data uncertainty has been a critical factor affecting performance,typically arising from the ambiguity of facial expressions,low-quality images,and the subjectivity of annotators.Tracking the training history reveals that misclassified samples often exhibit high confidence and excessive uncertainty in the early stages of training.To address this issue,we propose an uncertainty-based robust sample selection strategy,which combines confidence error with RandAugment to improve image diversity,effectively reducing overfitting caused by uncertain samples during deep learning model training.To validate the effectiveness of the proposed method,extensive experiments were conducted on FER public benchmarks.The accuracy obtained were 89.08%on RAF-DB,63.12%on AffectNet,and 88.73%on FERPlus.展开更多
Optical solitons,as self-sustaining waveforms in a nonlinear medium where dispersion and nonlinear effects are balanced,have key applications in ultrafast laser systems and optical communications.Physics-informed neur...Optical solitons,as self-sustaining waveforms in a nonlinear medium where dispersion and nonlinear effects are balanced,have key applications in ultrafast laser systems and optical communications.Physics-informed neural networks(PINN)provide a new way to solve the nonlinear Schrodinger equation describing the soliton evolution by fusing data-driven and physical constraints.However,the grid point sampling strategy of traditional PINN suffers from high computational complexity and unstable gradient flow,which makes it difficult to capture the physical details efficiently.In this paper,we propose a residual-based adaptive multi-distribution(RAMD)sampling method to optimize the PINN training process by dynamically constructing a multi-modal loss distribution.With a 50%reduction in the number of grid points,RAMD significantly reduces the relative error of PINN and,in particular,optimizes the solution error of the(2+1)Ginzburg–Landau equation from 4.55%to 1.98%.RAMD breaks through the lack of physical constraints in the purely data-driven model by the innovative combination of multi-modal distribution modeling and autonomous sampling control for the design of all-optical communication devices.RAMD provides a high-precision numerical simulation tool for the design of all-optical communication devices,optimization of nonlinear laser devices,and other studies.展开更多
This study was aimed at investigating the sampling strategies for 2 types of figures: 3-D cubes and human faces. The research was focused on: (a) from where the sampling process started; (b) in what order the figures&...This study was aimed at investigating the sampling strategies for 2 types of figures: 3-D cubes and human faces. The research was focused on: (a) from where the sampling process started; (b) in what order the figures' features were sampled. The study consisted of 2 experiments: (a) sampling strategies for 3-D cubes; (b) sampling strategies for human faces. The results showed that: (a), for 3-D cubes, the first sampling was mostly located at the outline parts, rarely at the center part; while for human faces, the first sampling was mostly located at the hair and outline parts, rarely at the mouth or cheek parts, in most cases, the first sampling-position had no significant effects on cognitive performance and that (b), the sampling order, both for 3-D cubes and for human faces, was determined by the degree of difference among the sampled-features.展开更多
We introduce the potential-decomposition strategy （PDS）, which can be used in Markov chain Monte Carlo sampling algorithms. PDS can be designed to make particles move in a modified potential that favors diffusion in...We introduce the potential-decomposition strategy （PDS）, which can be used in Markov chain Monte Carlo sampling algorithms. PDS can be designed to make particles move in a modified potential that favors diffusion in phase space, then, by rejecting some trial samples, the target distributions can be sampled in an unbiased manner. Furthermore, if the accepted trial samples are insumcient, they can be recycled as initial states to form more unbiased samples. This strategy can greatly improve efficiency when the original potential has multiple metastable states separated by large barriers. We apply PDS to the 2d Ising model and a double-well potential model with a large barrier, demonstrating in these two representative examples that convergence is accelerated by orders of magnitude.展开更多
Based on the topological analysis of three-phase matrix AC to AC conversion circuit, an AC to AC nine-switch matrix isequivalent to rectification part and conversion part. The Matrix converter can be viewed as AC-DC-A...Based on the topological analysis of three-phase matrix AC to AC conversion circuit, an AC to AC nine-switch matrix isequivalent to rectification part and conversion part. The Matrix converter can be viewed as AC-DC-AC converter, the asymmetricregular sampling method SPWM(Sine Pulse Width Modulation) is studied and applied in the three-phase matrix AC to AC converter,Based on Matlab/simulink the simulation of the matrix converter with such strategy is carried out. Inductive load simulation is carriedout on the matrix converter prototype. The simulation results verify the workability of the asymmetric regular sampling method SPWMstrategy for matrix converter.展开更多
Aim To develop a method to estimate population pharmacokinetic parameters with the limited sampling time points provided clinically during therapeutic drug monitoring. Methods Various simulations were attempted using ...Aim To develop a method to estimate population pharmacokinetic parameters with the limited sampling time points provided clinically during therapeutic drug monitoring. Methods Various simulations were attempted using a one-compartment open model with the first order absorption to determine PK parameter estimates with different sampling strategies as a validation of the method. The estimated parameters were further verified by comparing to the observed values. Results The samples collected at the single time point close to the non-informative sampling time point designed by this method led to bias and inaccurate parameter estimations. Furthermore, the relationship between the estimated non-informative sampling time points and the values of the parameter was examined. The non-informative sampling time points have been developed under some typical occasions and the results were plotted to show the tendency. As a result, one non-informative time point was demonstrated to be appropriate for clearance and two for both volume of distribution and constant of absorption in the present study. It was found that the estimates of the non-informative sampling time points developed in the method increase with increases of volume of distribution and the decrease of clearance and constant of absorption. Conclusion A rational sampling strategy during therapeutic drug monitoring can be established using the method present in the study.展开更多
It is a challenge in the field sampling to face conflict between the statistical requirements and the logistical constraints when explicitly estimating the macrobenthos species richness in the heterogeneous intertidal...It is a challenge in the field sampling to face conflict between the statistical requirements and the logistical constraints when explicitly estimating the macrobenthos species richness in the heterogeneous intertidal wetlands. To solve this problem, this study tried to design an optimal, efficient and practical sampling strategy by comprehensively focusing on the three main parts of the entire process(to optimize the sampling method, to determine the minimum sampling effort and to explore the proper sampling interval) in a typical intertidal wetland of the Changjiang(Yangtze) Estuary, China. Transect sampling was selected and optimized by stratification based on pronounced habitat types(tidal flat, tidal creek, salt marsh vegetation). This type of sampling is also termed within-transect stratification sampling. The optimal sampling intervals and the minimum sample effort were determined by two beneficial numerical methods: Monte Carlo simulations and accumulative species curves. The results show that the within-transect stratification sampling with typical habitat types was effective for encompassing 81% of the species, suggesting that this type of sampling design can largely reduce the sampling effort and labor. The optimal sampling intervals and minimum sampling efforts for three habitats were determined: sampling effort must exceed 1.8 m^2 by 10 m intervals in the salt marsh vegetation, 2 m^2 by 10 m intervals in the tidal flat, and 3 m^2 by 1 m intervals in the tidal creek habitat. It was suggested that the differences were influenced by the mobility range of the dominant species and the habitats' physical differences(e.g., tidal water, substrate, vegetation cover). The optimized sampling strategy could provide good precision in the richness estimation of macrobenthos and balance the sampling effort. Moreover, the conclusions presented here provide a reference for recommendations to consider before macrobenthic surveys take place in estuarine wetlands. The sampling strategy, focusing on the three key parts of the sampling design, had a good operational effect and could be used as a guide for field sampling for habitat management or ecosystem assessment.展开更多
Assessment of imprecise time-variant reliability in engineering is a critical task when accounting for both the variability of structural properties and loads over time and the presence of uncertainties involved in th...Assessment of imprecise time-variant reliability in engineering is a critical task when accounting for both the variability of structural properties and loads over time and the presence of uncertainties involved in the ambiguity of parameters simultaneously.To estimate the Imprecise Time-variant Failure Probability Function(ITFPF)and derive the imprecise reliability results as a byproduct,Adaptive Combination Augmented Line Sampling(ACALS)is proposed.It consists of three integrated features:Augmented Line Sampling(ALS),adaptive strategy,and the optimal combination.ALS is adopted as an efficient analysis tool to obtain the failure probability function w.r.t.imprecise parameters.Then,the adaptive strategy iteratively applies ALS while considering both imprecise parameters and time simultaneously.Finally,the optimal combination algorithm collects all result components in an optimal manner to minimize the Coefficient of Variance(C.o.V.)of the ITFPF estimate.Overall,the proposed ACALS method outperforms the original ALS method by efficiently estimating the ITFPF while guaranteeing a minimal C.o.V.Thus,the proposed approach can serve as an effective tool for imprecise time-variant reliability analysis in real engineering applications.Several examples are presented to demonstrate the superiority of the proposed approach in addressing the challenges of estimating the ITFPF.展开更多
The reliability and reliability sensitivity （ RS ） models are presented for the engineering problem involving truncated correlated normal variables （CNV）, and in the case an adaptive radial based sampling is used ...The reliability and reliability sensitivity （ RS ） models are presented for the engineering problem involving truncated correlated normal variables （CNV）, and in the case an adaptive radial based sampling is used to analyze the reliability and the RS. In the presented models, the truncated CNV is transformed to general CNV, and the value domains of the truncated CNV are treated as multiple failure modes, then the reliability and the RS with the truncated CNV are transformed to the general cases, on which an e^cient radial based sampling is used to analyze the trans- formed reliability and RS. An adaptive strategy is employed to search for the optimal radial in the sampling, by which the robustness of the method is improved. After the model concepts and the detailed implementation are given, several examples are presented to demonstrate the feasibility of the model and the efficiency of the solutions.展开更多
In recent years,surrogate models derived from genuine data samples have proven to be efficient in addressing optimization challenges that are costly or time⁃intensive.However,the individuals in the population become i...In recent years,surrogate models derived from genuine data samples have proven to be efficient in addressing optimization challenges that are costly or time⁃intensive.However,the individuals in the population become indistinguishable as the curse of dimensionality increases in the objective space and the accumulation of surrogate approximated errors.Therefore,in this paper,each objective function is modeled using a radial basis function approach,and the optimal solution set of the surrogate model is located by the multi⁃objective evolutionary algorithm of strengthened dominance relation.The original objective function values of the true evaluations are converted to two indicator values,and then the surrogate models are set up for the two performance indicators.Finally,an adaptive infill sampling strategy that relies on approximate performance indicators is proposed to assist in selecting individuals for real evaluations from the potential optimal solution set.The algorithm is contrasted against several advanced surrogate⁃assisted evolutionary algorithms on two suites of test cases,and the experimental findings prove that the approach is competitive in solving expensive many⁃objective optimization problems.展开更多
文摘In order to determine an appropriate sampling strategy for the effective conservation of wild soybean (Glycine soja Sieb. et Zucc.) in China, a natural population from Jiangwan Airport in Shanghai was studied for its genetic diversity through the inter-simple sequence repeat (ISSR) marker analysis of a sample set consisting of 100 randomly collected individuals. A relatively large genetic diversity was detected among the samples based on estimation of DNA products amplified from 15 selected ISSR primers, with the similarity coefficient varying from 0.17 to 0.89. The mean expected heterozygosity (He) was 0.171 4 per locus, and Shannon index (1) was 0.271 4. The Principal Coordinate Analysis (PCA) further indicated that genetic diversity of the Jiangwan wild soybean population was not evenly distributed, instead, was presented by a mosaic or clustered distribution pattern. Correlation study between genetic diversity and number of samples demonstrated that genetic diversity increased dramatically with the increase of number of samples within 40 individuals, but the increase became slow and rapidly reached a plateau when more than 40 individuals were included in the analysis. It is concluded that (i) a sample set of approximately 35-45 individuals should be included to represent possibly high genetic diversity when conservation of a wild soybean population ex situ is undertaken; and (ii) collection of wild soybean samples should be spread out as wide as possible within a population, and a certain distance should be kept as intervals among individuals for sampling.
基金Project supported by the British Council !(No. SHA/ 992/ 297) the Natural Science Foundation of Zhejiang Province, China! (N
文摘Field nutrient distribution maps obtained from the study on soil variations within fields are the basis of precision agriculture. The quality of these maps for management depends on the accuracy of the predicted values, which depends on the initial sampling. To produce reliable predictions efficiently the minimal sampling size and combination should be decided firstly, which could avoid the misspent funds for field sampling work. A 7.9 hectare silage field close to the Agricultural Research institute at Hillsborough, Northern Ireland, was selected for the study. Soil samples were collected from the field at 25 m intervals in a rectangular grid to provide a database of selected soil properties. Different data combinations were subsequently abstracted from this database for comparison purposes, and ordinary kriging used to produce interpolated soil maps. These predicted data groups were compared using least significant difference (LSD) test method. The results showed that the 62 sampling sizes of triangle arrangement for soil available K were sufficient to reach the required accuracy. The triangular sample combination proved to be superior to a rectangular one of similar sample size.
文摘The aim of this study is to investigate the impacts of the sampling strategy of landslide and non-landslide on the performance of landslide susceptibility assessment(LSA).The study area is the Feiyun catchment in Wenzhou City,Southeast China.Two types of landslides samples,combined with seven non-landslide sampling strategies,resulted in a total of 14 scenarios.The corresponding landslide susceptibility map(LSM)for each scenario was generated using the random forest model.The receiver operating characteristic(ROC)curve and statistical indicators were calculated and used to assess the impact of the dataset sampling strategy.The results showed that higher accuracies were achieved when using the landslide core as positive samples,combined with non-landslide sampling from the very low zone or buffer zone.The results reveal the influence of landslide and non-landslide sampling strategies on the accuracy of LSA,which provides a reference for subsequent researchers aiming to obtain a more reasonable LSM.
基金supported by the National Natural Science Foundation of China(32102793)National Key R&D Program of China(2018YFD0900802)+4 种基金Central Public-Interest Scientific Institution Basal Research FundSouth China Sea Fisheries Research Institute,CAFS(2019TS13,2021SD18)Key Special Project for Introduced Talents Team of Southern Marine Science and Engineering Guangdong Laboratory(Guangzhou)(GML2019ZD0605)Open Fund Project of Key Laboratory of Offshore Fishery Development of Ministry of Agriculture and Rural Affairs(LOF 2020-02)China-ASEAN Maritime Cooperation Fund(CAMC-2018F)。
文摘Environmental DNA(eDNA)integrated with metabarcoding is a promising and powerful tool for species composition and biodiversity assessment in aquatic ecosystems and is increasingly applied to evaluate fish diversity.To date,however,no standardized eDNA-based protocol has been established to monitor fish diversity.In this study,we investigated and compared two filtration methods and three DNA extraction methods using three filtration water volumes to determine a suitable approach for eDNA-based fish diversity monitoring in the Pearl River Estuary(PRE),a highly anthropogenically disturbed estuarine ecosystem.Compared to filtration-based precipitation,direct filtration was a more suitable method for eDNA metabarcoding in the PRE.The combined use of DNeasy Blood and Tissue Kit(BT)and traditional phenol/chloroform(PC)extraction produced higher DNA yields,amplicon sequence variants(ASVs),and Shannon diversity indices,and generated more homogeneous and consistent community composition among replicates.Compared to the other combined protocols,the PC and BT methods obtained better species detection,higher fish diversity,and greater consistency for the filtration water volumes of 1000 and 2000 mL,respectively.All eDNA metabarcoding protocols were more sensitive than bottom trawling in the PRE fish surveys and combining two techniques yielded greater taxonomic diversity.Furthermore,combining traditional methods with eDNA analysis enhanced accuracy.These results indicate that methodological decisions related to eDNA metabarcoding should be made with caution for fish community monitoring in estuarine ecosystems.
基金This work was supported by National Natural Science Foundation of China(Grant no.41972267 and no.41572257)Graduate Innovation Fund of Jilin University(Grant no.101832020CX232)。
文摘The quality of debris flow susceptibility mapping varies with sampling strategies. This paper aims at comparing three sampling strategies and determining the optimal one to sample the debris flow watersheds. The three sampling strategies studied were the centroid of the scarp area(COSA), the centroid of the flowing area(COFA), and the centroid of the accumulation area(COAA) of debris flow watersheds. An inventory consisting of 150 debris flow watersheds and 12 conditioning factors were prepared for research. Firstly, the information gain ratio(IGR) method was used to analyze the predictive ability of the conditioning factors. Subsequently, 12 conditioning factors were involved in the modeling of artificial neural network(ANN), random forest(RF) and support vector machine(SVM). Then, the receiver operating characteristic curves(ROC) and the area under curves(AUC) were used to evaluate the model performance. Finally, a scoring system was used to score the quality of the debris flow susceptibility maps. Samples obtained from the accumulation area have the strongest predictive ability and can make the models achieve the best performance. The AUC values corresponding to the best model performance on the validation dataset were 0.861, 0.804 and 0.856 for SVM, ANN and RF respectively. The sampling strategy of the centroid of the scarp area is optimal with the highest quality of debris flow susceptibility maps having scores of 373470, 393241 and 362485 for SVM, ANN and RF respectively.
基金the Forest Inventory Analysis Unit for funding the data collection and analysis phases of this project
文摘Background：Depending on tree and site characteristics crown biomass accounts for a significant portion of the total aboveground biomass in the tree.Crown biomass estimation is useful for different purposes including evaluating the economic feasibility of crown utilization for energy production or forest products,fuel load assessments and fire management strategies,and wildfire modeling.However,crown biomass is difficult to predict because of the variability within and among species and sites.Thus the allometric equations used for predicting crown biomass should be based on data collected with precise and unbiased sampling strategies.In this study,we evaluate the performance different sampling strategies to estimate crown biomass and to evaluate the effect of sample size in estimating crown biomass.Methods：Using data collected from 20 destructively sampled trees,we evaluated 11 different sampling strategies using six evaluation statistics：bias,relative bias,root mean square error（RMSE）,relative RMSE,amount of biomass sampled,and relative biomass sampled.We also evaluated the performance of the selected sampling strategies when different numbers of branches（3,6,9,and 12）are selected from each tree.Tree specific log linear model with branch diameter and branch length as covariates was used to obtain individual branch biomass.Results：Compared to all other methods stratified sampling with probability proportional to size estimation technique produced better results when three or six branches per tree were sampled.However,the systematic sampling with ratio estimation technique was the best when at least nine branches per tree were sampled.Under the stratified sampling strategy,selecting unequal number of branches per stratum produced approximately similar results to simple random sampling,but it further decreased RMSE when information on branch diameter is used in the design and estimation phases.Conclusions：Use of auxiliary information in design or estimation phase reduces the RMSE produced by a sampling strategy.However,this is attained by having to sample larger amount of biomass.Based on our finding we would recommend sampling nine branches per tree to be reasonably efficient and limit the amount of fieldwork.
基金supported by the National Key Research and Development Program(2021YFB3502500).
文摘Multi-objective optimization(MOO)for the microwave metamaterial absorber(MMA)normally adopts evolutionary algo-rithms,and these optimization algorithms require many objec-tive function evaluations.To remedy this issue,a surrogate-based MOO algorithm is proposed in this paper where Kriging models are employed to approximate objective functions.An efficient sampling strategy is presented to sequentially capture promising samples in the design region for exact evaluations.Firstly,new sample points are generated by the MOO on surro-gate models.Then,new samples are captured by exploiting each objective function.Furthermore,a weighted sum of the improvement of hypervolume(IHV)and the distance to sampled points is calculated to select the new sample.Compared with two well-known MOO algorithms,the proposed algorithm is vali-dated by benchmark problems.In addition,two broadband MMAs are applied to verify the feasibility and efficiency of the proposed algorithm.
文摘In the task of Facial Expression Recognition(FER),data uncertainty has been a critical factor affecting performance,typically arising from the ambiguity of facial expressions,low-quality images,and the subjectivity of annotators.Tracking the training history reveals that misclassified samples often exhibit high confidence and excessive uncertainty in the early stages of training.To address this issue,we propose an uncertainty-based robust sample selection strategy,which combines confidence error with RandAugment to improve image diversity,effectively reducing overfitting caused by uncertain samples during deep learning model training.To validate the effectiveness of the proposed method,extensive experiments were conducted on FER public benchmarks.The accuracy obtained were 89.08%on RAF-DB,63.12%on AffectNet,and 88.73%on FERPlus.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1604200)National Natural Science Foundation of China(Grant No.12261131495)+1 种基金Beijing Municipal Science and Technology Commission,Adminitrative Commission of Zhongguancun Science Park(Grant No.Z231100006623006)Institute of Systems Science,Beijing Wuzi University(Grant No.BWUISS21)。
文摘Optical solitons,as self-sustaining waveforms in a nonlinear medium where dispersion and nonlinear effects are balanced,have key applications in ultrafast laser systems and optical communications.Physics-informed neural networks(PINN)provide a new way to solve the nonlinear Schrodinger equation describing the soliton evolution by fusing data-driven and physical constraints.However,the grid point sampling strategy of traditional PINN suffers from high computational complexity and unstable gradient flow,which makes it difficult to capture the physical details efficiently.In this paper,we propose a residual-based adaptive multi-distribution(RAMD)sampling method to optimize the PINN training process by dynamically constructing a multi-modal loss distribution.With a 50%reduction in the number of grid points,RAMD significantly reduces the relative error of PINN and,in particular,optimizes the solution error of the(2+1)Ginzburg–Landau equation from 4.55%to 1.98%.RAMD breaks through the lack of physical constraints in the purely data-driven model by the innovative combination of multi-modal distribution modeling and autonomous sampling control for the design of all-optical communication devices.RAMD provides a high-precision numerical simulation tool for the design of all-optical communication devices,optimization of nonlinear laser devices,and other studies.
基金Project (No. 39670262) supported by the National Natural Science Foundation of Chinathe International Scholar Exchange Fellowship Program (2000) of the Korea Foundation For Advanced Studies
文摘This study was aimed at investigating the sampling strategies for 2 types of figures: 3-D cubes and human faces. The research was focused on: (a) from where the sampling process started; (b) in what order the figures' features were sampled. The study consisted of 2 experiments: (a) sampling strategies for 3-D cubes; (b) sampling strategies for human faces. The results showed that: (a), for 3-D cubes, the first sampling was mostly located at the outline parts, rarely at the center part; while for human faces, the first sampling was mostly located at the hair and outline parts, rarely at the mouth or cheek parts, in most cases, the first sampling-position had no significant effects on cognitive performance and that (b), the sampling order, both for 3-D cubes and for human faces, was determined by the degree of difference among the sampled-features.
基金Supported by the National Natural Science Foundation of China under Grant Nos.10674016,10875013the Specialized Research Foundation for the Doctoral Program of Higher Education under Grant No.20080027005
文摘We introduce the potential-decomposition strategy （PDS）, which can be used in Markov chain Monte Carlo sampling algorithms. PDS can be designed to make particles move in a modified potential that favors diffusion in phase space, then, by rejecting some trial samples, the target distributions can be sampled in an unbiased manner. Furthermore, if the accepted trial samples are insumcient, they can be recycled as initial states to form more unbiased samples. This strategy can greatly improve efficiency when the original potential has multiple metastable states separated by large barriers. We apply PDS to the 2d Ising model and a double-well potential model with a large barrier, demonstrating in these two representative examples that convergence is accelerated by orders of magnitude.
文摘Based on the topological analysis of three-phase matrix AC to AC conversion circuit, an AC to AC nine-switch matrix isequivalent to rectification part and conversion part. The Matrix converter can be viewed as AC-DC-AC converter, the asymmetricregular sampling method SPWM(Sine Pulse Width Modulation) is studied and applied in the three-phase matrix AC to AC converter,Based on Matlab/simulink the simulation of the matrix converter with such strategy is carried out. Inductive load simulation is carriedout on the matrix converter prototype. The simulation results verify the workability of the asymmetric regular sampling method SPWMstrategy for matrix converter.
基金National Natural Science Foundation of China(Grant No. 30472165) the 985 Projects of the State KeyLaboratory of Natural and Biomimetic Drugs (Grant No.268705077280).
文摘Aim To develop a method to estimate population pharmacokinetic parameters with the limited sampling time points provided clinically during therapeutic drug monitoring. Methods Various simulations were attempted using a one-compartment open model with the first order absorption to determine PK parameter estimates with different sampling strategies as a validation of the method. The estimated parameters were further verified by comparing to the observed values. Results The samples collected at the single time point close to the non-informative sampling time point designed by this method led to bias and inaccurate parameter estimations. Furthermore, the relationship between the estimated non-informative sampling time points and the values of the parameter was examined. The non-informative sampling time points have been developed under some typical occasions and the results were plotted to show the tendency. As a result, one non-informative time point was demonstrated to be appropriate for clearance and two for both volume of distribution and constant of absorption in the present study. It was found that the estimates of the non-informative sampling time points developed in the method increase with increases of volume of distribution and the decrease of clearance and constant of absorption. Conclusion A rational sampling strategy during therapeutic drug monitoring can be established using the method present in the study.
基金The Special Scientific Research Funds for Central Non-profit Institutes(East China Sea Fisheries Research Institute)under contract No.2016T08the National Natural Science Foundation of China under contract No.31400410
文摘It is a challenge in the field sampling to face conflict between the statistical requirements and the logistical constraints when explicitly estimating the macrobenthos species richness in the heterogeneous intertidal wetlands. To solve this problem, this study tried to design an optimal, efficient and practical sampling strategy by comprehensively focusing on the three main parts of the entire process(to optimize the sampling method, to determine the minimum sampling effort and to explore the proper sampling interval) in a typical intertidal wetland of the Changjiang(Yangtze) Estuary, China. Transect sampling was selected and optimized by stratification based on pronounced habitat types(tidal flat, tidal creek, salt marsh vegetation). This type of sampling is also termed within-transect stratification sampling. The optimal sampling intervals and the minimum sample effort were determined by two beneficial numerical methods: Monte Carlo simulations and accumulative species curves. The results show that the within-transect stratification sampling with typical habitat types was effective for encompassing 81% of the species, suggesting that this type of sampling design can largely reduce the sampling effort and labor. The optimal sampling intervals and minimum sampling efforts for three habitats were determined: sampling effort must exceed 1.8 m^2 by 10 m intervals in the salt marsh vegetation, 2 m^2 by 10 m intervals in the tidal flat, and 3 m^2 by 1 m intervals in the tidal creek habitat. It was suggested that the differences were influenced by the mobility range of the dominant species and the habitats' physical differences(e.g., tidal water, substrate, vegetation cover). The optimized sampling strategy could provide good precision in the richness estimation of macrobenthos and balance the sampling effort. Moreover, the conclusions presented here provide a reference for recommendations to consider before macrobenthic surveys take place in estuarine wetlands. The sampling strategy, focusing on the three key parts of the sampling design, had a good operational effect and could be used as a guide for field sampling for habitat management or ecosystem assessment.
基金The Aeronautical Science Foundation of China(Nos.20170968002,20230003068002)The National Major Science and Technology Projects of China(Nos.J2019-II-0022-0043,J2019-VII-0013-0153).
文摘Assessment of imprecise time-variant reliability in engineering is a critical task when accounting for both the variability of structural properties and loads over time and the presence of uncertainties involved in the ambiguity of parameters simultaneously.To estimate the Imprecise Time-variant Failure Probability Function(ITFPF)and derive the imprecise reliability results as a byproduct,Adaptive Combination Augmented Line Sampling(ACALS)is proposed.It consists of three integrated features:Augmented Line Sampling(ALS),adaptive strategy,and the optimal combination.ALS is adopted as an efficient analysis tool to obtain the failure probability function w.r.t.imprecise parameters.Then,the adaptive strategy iteratively applies ALS while considering both imprecise parameters and time simultaneously.Finally,the optimal combination algorithm collects all result components in an optimal manner to minimize the Coefficient of Variance(C.o.V.)of the ITFPF estimate.Overall,the proposed ACALS method outperforms the original ALS method by efficiently estimating the ITFPF while guaranteeing a minimal C.o.V.Thus,the proposed approach can serve as an effective tool for imprecise time-variant reliability analysis in real engineering applications.Several examples are presented to demonstrate the superiority of the proposed approach in addressing the challenges of estimating the ITFPF.
基金support of the Natural Science Foundation of China (NSFC10572117and 50875213)Aviation Science Foundation(2007ZA53012)863 Project (2007AA04Z401)
文摘The reliability and reliability sensitivity （ RS ） models are presented for the engineering problem involving truncated correlated normal variables （CNV）, and in the case an adaptive radial based sampling is used to analyze the reliability and the RS. In the presented models, the truncated CNV is transformed to general CNV, and the value domains of the truncated CNV are treated as multiple failure modes, then the reliability and the RS with the truncated CNV are transformed to the general cases, on which an e^cient radial based sampling is used to analyze the trans- formed reliability and RS. An adaptive strategy is employed to search for the optimal radial in the sampling, by which the robustness of the method is improved. After the model concepts and the detailed implementation are given, several examples are presented to demonstrate the feasibility of the model and the efficiency of the solutions.
基金Sponsored by Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(Grant No.2022L294)Taiyuan University of Science and Technology Scientific Research Initial Funding(Grant Nos.W2022018,W20242012)Foundamental Research Program of Shanxi Province(Grant No.202403021212170).
文摘In recent years,surrogate models derived from genuine data samples have proven to be efficient in addressing optimization challenges that are costly or time⁃intensive.However,the individuals in the population become indistinguishable as the curse of dimensionality increases in the objective space and the accumulation of surrogate approximated errors.Therefore,in this paper,each objective function is modeled using a radial basis function approach,and the optimal solution set of the surrogate model is located by the multi⁃objective evolutionary algorithm of strengthened dominance relation.The original objective function values of the true evaluations are converted to two indicator values,and then the surrogate models are set up for the two performance indicators.Finally,an adaptive infill sampling strategy that relies on approximate performance indicators is proposed to assist in selecting individuals for real evaluations from the potential optimal solution set.The algorithm is contrasted against several advanced surrogate⁃assisted evolutionary algorithms on two suites of test cases,and the experimental findings prove that the approach is competitive in solving expensive many⁃objective optimization problems.
