Tensile cracking is a predominant mode of failure in rocks within underground resource excavation and engineering structures,where rocks are frequently subjected to dynamic disturbances while simultaneously experienci...Tensile cracking is a predominant mode of failure in rocks within underground resource excavation and engineering structures,where rocks are frequently subjected to dynamic disturbances while simultaneously experiencing in-situ stresses.This paper proposes a new dynamic split tension setup utilising a cubic specimen to investigate the dynamic behaviour of rocks across various tensile strain rates and confining pressures.The objective is to extend the applicability of the triaxial Hopkinson bar in studying dynamic behaviour of geomaterials.For comparison,the dynamic Brazilian disc(BD)tests were performed using three rock types(e.g.,sandstone,granite and marble)under different strain rates ranging from 10^(−3)∼10^(2) s^(−1).Besides,the Digital Image Correlation(DIC)technique was adopted to measure full-field real-time tensile strain of rocks and demonstrated that tensile crack initiated at the middle part and split the specimen into two similar halves.Effects of specimen size,geometry,loading rate as well as the confining pressure are investigated in detail.The dynamic fracture behaviours,including dynamic tensile strength,tensile strain,time to fracture and dynamic increase factor(DIF),were characterised for the rocks.It is found that dynamic tensile strength of rock minimal dependence on size and geometry but is significantly influenced by loading rate and confinement.It exhibited a linear increase with strain rate(10^(0)∼10^(2) s^(−1))and demonstrated a nonlinear growth with lateral confinement from 0 to 15 MPa.The nonlinear dependency on confinement can be attributed to the restriction imposed on the opening and propagation of tensile cracks due to the presence of confinement.These findings enhance our understanding of the safety aspects associated with underground rock excavations,particularly in situations where considering in-situ stress is crucial for evaluating the dynamic tensile failure of rocks.展开更多
Recent advances in additive manufacturing have enabled the construction of metallic lattice structures with tailored mechanical and functional properties.One potential application of metallic lattice struc-tures is in...Recent advances in additive manufacturing have enabled the construction of metallic lattice structures with tailored mechanical and functional properties.One potential application of metallic lattice struc-tures is in the impact load mitigation where an external kinetic energy is absorbed by the deformation/crushing of lattice cells.This has motivated a growing number of experimental and numerical studies,recently,on the crushing behavior of additively produced lattice structures.The present study overviews the dynamic and quasi-static crushing behavior of additively produced Ti64,316L,and AlSiMg alloy lattice structures.The first part of the study summarizes the main features of two most commonly used additive processing techniques for lattice structures,namely selective-laser-melt(SLM)and electro-beam-melt(EBM),along with a description of commonly observed process induced defects.In the second part,the deformation and strain rate sensitivities of the selected alloy lattices are outlined together with the most widely used dynamic test methods,followed by a part on the observed micro-structures of the SLM and EBM-processed Ti64,316L and AlSiMg alloys.Finally,the experimental and numerical studies on the quasi-static and dynamic compression behavior of the additively processed Ti64,316L,and AlSiMg alloy lattices are reviewed.The results of the experimental and numerical studies of the dynamic properties of various types of lattices,including graded,non-uniform strut size,hollow,non-uniform cell size,and bio-inspired,were tabulated together with the used dynamic testing methods.The dynamic tests have been noted to be mostly conducted in compression Split Hopkinson Pressure Bar(SHPB)or Taylor-and direct-impact tests using the SHPB set-up,in all of which relatively small-size test specimens were tested.The test specimen size effect on the compression behavior of the lattices was further emphasized.It has also been shown that the lattices of Ti64 and AlSiMg alloys are relatively brittle as compared with the lattices of 316L alloy.Finally,the challenges associated with modelling lattice structures were explained and the micro tension tests and multi-scale modeling techniques combining microstructural characteristics with macroscopic lattice dynamics were recommended to improve the accuracy of the numerical simulations of the dynamic compression deformations of metallic lattice structures.展开更多
Effects of strain rate and water-to-cement ratio on the dynamic compressive mechanical behavior of cement mortar are investigated by split Hopkinson pressure bar(SHPB) tests. 124 specimens are subjected to dynamic uni...Effects of strain rate and water-to-cement ratio on the dynamic compressive mechanical behavior of cement mortar are investigated by split Hopkinson pressure bar(SHPB) tests. 124 specimens are subjected to dynamic uniaxial compressive loadings.Strain rate sensitivity of the materials is measured in terms of failure modes, stress-strain curves, compressive strength, dynamic increase factor(DIF) and critical strain at peak stress. A significant change in the stress-strain response of the materials with each order of magnitude increase in strain rate is clearly seen from test results. The slope of the stress-strain curve after peak value for low water-to-cement ratio is steeper than that of high water-to-cement ratio mortar. The compressive strength increases with increasing strain rate. With increase in strain rate, the dynamic increase factor(DIF) increases. However, this increase in DIF with increase in strain rate does not appear to be a function of the water-to-cement ratio. The critical compressive strain increases with the strain rate.展开更多
基金supported by the Australian Research Council(LE150100058)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering(Z020002)State Key Laboratory of Coal Mine Disaster Dynamics and Control.The specimens were scanned at the Imaging and Medical beamline(IMBL)under the Australian Synchrotron projects(NO:M15862 and M14428).
文摘Tensile cracking is a predominant mode of failure in rocks within underground resource excavation and engineering structures,where rocks are frequently subjected to dynamic disturbances while simultaneously experiencing in-situ stresses.This paper proposes a new dynamic split tension setup utilising a cubic specimen to investigate the dynamic behaviour of rocks across various tensile strain rates and confining pressures.The objective is to extend the applicability of the triaxial Hopkinson bar in studying dynamic behaviour of geomaterials.For comparison,the dynamic Brazilian disc(BD)tests were performed using three rock types(e.g.,sandstone,granite and marble)under different strain rates ranging from 10^(−3)∼10^(2) s^(−1).Besides,the Digital Image Correlation(DIC)technique was adopted to measure full-field real-time tensile strain of rocks and demonstrated that tensile crack initiated at the middle part and split the specimen into two similar halves.Effects of specimen size,geometry,loading rate as well as the confining pressure are investigated in detail.The dynamic fracture behaviours,including dynamic tensile strength,tensile strain,time to fracture and dynamic increase factor(DIF),were characterised for the rocks.It is found that dynamic tensile strength of rock minimal dependence on size and geometry but is significantly influenced by loading rate and confinement.It exhibited a linear increase with strain rate(10^(0)∼10^(2) s^(−1))and demonstrated a nonlinear growth with lateral confinement from 0 to 15 MPa.The nonlinear dependency on confinement can be attributed to the restriction imposed on the opening and propagation of tensile cracks due to the presence of confinement.These findings enhance our understanding of the safety aspects associated with underground rock excavations,particularly in situations where considering in-situ stress is crucial for evaluating the dynamic tensile failure of rocks.
基金the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 101034425 for the project titled A2M2TECHThe Scientific and Technological Research Council of Türkiye (TUBITAK) with grant No 120C158 for the same A2M2TECH project under the TUBITAK's 2236/B program
文摘Recent advances in additive manufacturing have enabled the construction of metallic lattice structures with tailored mechanical and functional properties.One potential application of metallic lattice struc-tures is in the impact load mitigation where an external kinetic energy is absorbed by the deformation/crushing of lattice cells.This has motivated a growing number of experimental and numerical studies,recently,on the crushing behavior of additively produced lattice structures.The present study overviews the dynamic and quasi-static crushing behavior of additively produced Ti64,316L,and AlSiMg alloy lattice structures.The first part of the study summarizes the main features of two most commonly used additive processing techniques for lattice structures,namely selective-laser-melt(SLM)and electro-beam-melt(EBM),along with a description of commonly observed process induced defects.In the second part,the deformation and strain rate sensitivities of the selected alloy lattices are outlined together with the most widely used dynamic test methods,followed by a part on the observed micro-structures of the SLM and EBM-processed Ti64,316L and AlSiMg alloys.Finally,the experimental and numerical studies on the quasi-static and dynamic compression behavior of the additively processed Ti64,316L,and AlSiMg alloy lattices are reviewed.The results of the experimental and numerical studies of the dynamic properties of various types of lattices,including graded,non-uniform strut size,hollow,non-uniform cell size,and bio-inspired,were tabulated together with the used dynamic testing methods.The dynamic tests have been noted to be mostly conducted in compression Split Hopkinson Pressure Bar(SHPB)or Taylor-and direct-impact tests using the SHPB set-up,in all of which relatively small-size test specimens were tested.The test specimen size effect on the compression behavior of the lattices was further emphasized.It has also been shown that the lattices of Ti64 and AlSiMg alloys are relatively brittle as compared with the lattices of 316L alloy.Finally,the challenges associated with modelling lattice structures were explained and the micro tension tests and multi-scale modeling techniques combining microstructural characteristics with macroscopic lattice dynamics were recommended to improve the accuracy of the numerical simulations of the dynamic compression deformations of metallic lattice structures.
基金Project(51479048) supported by National Natural Science Foundation of China
文摘Effects of strain rate and water-to-cement ratio on the dynamic compressive mechanical behavior of cement mortar are investigated by split Hopkinson pressure bar(SHPB) tests. 124 specimens are subjected to dynamic uniaxial compressive loadings.Strain rate sensitivity of the materials is measured in terms of failure modes, stress-strain curves, compressive strength, dynamic increase factor(DIF) and critical strain at peak stress. A significant change in the stress-strain response of the materials with each order of magnitude increase in strain rate is clearly seen from test results. The slope of the stress-strain curve after peak value for low water-to-cement ratio is steeper than that of high water-to-cement ratio mortar. The compressive strength increases with increasing strain rate. With increase in strain rate, the dynamic increase factor(DIF) increases. However, this increase in DIF with increase in strain rate does not appear to be a function of the water-to-cement ratio. The critical compressive strain increases with the strain rate.
