Ambient Assisted Living(AAL) is becoming an important research field. Many technologies have emerged related with pervasive computing vision, which can give support for AAL. One of the most reliable approaches is base...Ambient Assisted Living(AAL) is becoming an important research field. Many technologies have emerged related with pervasive computing vision, which can give support for AAL. One of the most reliable approaches is based on wireless sensor networks(WSNs). In this paper, we propose a coverage-aware unequal clustering protocol with load separation(CUCPLS) for data gathering of AAL applications based on WSNs. Firstly, the coverage overlap factor for nodes is introduced that accounts for the degree of target nodes covered. In addition, to balance the intra-cluster and inter-cluster energy consumptions, different competition radiuses of CHs are computed theoretically in different rings, and smaller clusters are formed near the sink. Moreover, two CHs are selected in each cluster for load separation to alleviate the substantial energy consumption difference between a single CH and its member nodes. Furthermore, a backoff waiting time is adopted during the selection of the two CHs to reduce the number of control messages employed. Simulation results demonstrate that the CUCPLS not only can achieve better coverage performance, but also balance the energy consumption of a network and prolong network lifetime.展开更多
The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryo...The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.展开更多
Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation ne...Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation neural network(BPNN)algorithm,are proposed to identify the loading positions individually.The feasibility of the suggested methods is evaluated through an experimental program on a carbon fiber reinforced plastic laminate.The experimental tests involve in application of four optical fiber-based sensors for strain measurement at discrete points.The sensors are specially designed fiber Bragg grating(FBG)in small diameter.The small-diameter FBG sensors are arrayed in 2-D on the laminate surface.The testing results indicate that the loading position could be detected by the proposed method.Using SVM method,the 2-D FBG sensors can approximate the loading location with maximum error less than 14 mm.However,the maximum localization error could be limited to about 1 mm by applying the BPNN algorithm.It is mainly because the convergence conditions(mean square error)can be set in advance,while SVM cannot.展开更多
To aware the topology of wireless sensor networks (WSN) with time-variety, and load-balance the resource of communication and energy, an opportunistic routing protocol for WSN based on Opportunistic Routing Entropy an...To aware the topology of wireless sensor networks (WSN) with time-variety, and load-balance the resource of communication and energy, an opportunistic routing protocol for WSN based on Opportunistic Routing Entropy and ant colony optimization, called ACO-TDOP, is proposed. At first, based on the second law of thermo-dynamics, we introduce the concept of Opportunistic Routing Entropy which is a parameter representing the transmission state of each node by taking into account the power left and the distance to the sink node. Then, it is proved that the problem of route thinking about Opportunistic Routing Entropy is shown to be NP-hard. So the protocol, ACO-TDOP, is proposed. At last, numerical results confirm that the ACO-TDOP is energy conservative and throughput gainful compared with other two existing routing protocols, and show that it is efficacious to analyze and uncover fundamental of message transmission with Opportunistic Routing in wireless network using the second law of thermodynamics.展开更多
Wireless sensor networks are characterized by multihop wireless links and resource constrained nodes. In terms of data collection and forwarding scheduling, this paper investigates the load balancing in sensor nodes a...Wireless sensor networks are characterized by multihop wireless links and resource constrained nodes. In terms of data collection and forwarding scheduling, this paper investigates the load balancing in sensor nodes and wireless link based on the performance of wireless sensor networks. Leveraging the property of dissimilarity distribution, a method to quantitatively evaluate the benefits of load balancing is presented, in order to access the profitability. Then a novel Dynamic Load Balancing of Overlay-based WSN (DLBO) algorithm has been put forward. In particular, the tradeoff between transferring ratio and the load imbalance among nodes is discussed. The load balancing method in this paper outperforms others based on balancing factor, different nodes number and data scales of applications. The proposed model and analytical results can be effectively applied for reliability analysis for other wireless applications (e.g., persistent data delivery is involved).展开更多
Aiming at the problem that node load is rarely considered in existing clustering routing algorithm for Wireless Sensor Networks (WSNs), a dynamic clustering routing algorithm for WSN is presented in this paper called ...Aiming at the problem that node load is rarely considered in existing clustering routing algorithm for Wireless Sensor Networks (WSNs), a dynamic clustering routing algorithm for WSN is presented in this paper called DCRCL (Dynamic Clustering Routing Considering Load). This algorithm is comprised of three phases including cluster head (CH) selection, cluster setup and inter-cluster routing. First, the CHs are selected based on residual energy and node load. Then the non-CH nodes choose a cluster by comparing the cost function of its neighbor CHs. At last, each CH communicates with base station by using multi-hop communication. The simulation results show that comparing with the existing one, the techniques life cycle and date volume of the network are increased by 30.7 percent and 29.8 percent respectively by using the proposed algorithm DCRCL.展开更多
Research interest in sensor networks routing largely considers minimization of energy consumption as a major performance criterion to provide maximum sensors network lifetime. When considering energy conservation, rou...Research interest in sensor networks routing largely considers minimization of energy consumption as a major performance criterion to provide maximum sensors network lifetime. When considering energy conservation, routing protocols should also be designed to achieve fault tolerance in communications. Moreover, due to dynamic topology and random deployment, incorporating reliability into protocols for WSNs is very important. Hence, we propose an improved scalable clustering-based load balancing scheme (SCLB) in this paper. In SCLB scheme, scalability is achieved by dividing the network into overlapping multihop clusters each with its own cluster head node. Simulation results show that the proposed scheme achieves longer network lifetime with desirable reliability at the initial state compare with the existing multihop load balancing approach.展开更多
Despite the increasing popularity of mechanized coal mining, there are no convenient and accurate means available to measure the loads of powered supports. The measurement of such loads is important for monitoring min...Despite the increasing popularity of mechanized coal mining, there are no convenient and accurate means available to measure the loads of powered supports. The measurement of such loads is important for monitoring mine pressure and ensuring production safety. The load-carrying features of a powered support were used to develop a method for load measurement using the mag-netoelastic principle. A cross bridge-type magnetoelastic stress sensor was designed for the support structures to measure the different parts of the supports. Tests on single-body hydraulic cylinders and simulated linkages showed that an approximately linear relationship between the values of the sensor output signal and the loads borne by the hydraulic cylinders or linkages. The results were used to analyze the load-carrying measurements of powered supports with the cross bridge-type magnetoelastic stress sensor.展开更多
Load-balance is an important issue in wireless sensor networks (WSNs), especially in WSNs with hierarchical structure. Energy consumed unevenly will bring the production of hot spots. Hot spot will cause WSNs to divid...Load-balance is an important issue in wireless sensor networks (WSNs), especially in WSNs with hierarchical structure. Energy consumed unevenly will bring the production of hot spots. Hot spot will cause WSNs to divide some unconnected sub-networks and shorten the lifetime of WSNs. To tackle this problem, a load-balance mechanism is proposed based on minority game (MG) with dormancy strategy. This mechanism can cause the rich behaviors of cooperation , prolong lifetime of WSNs, and keep energy consumed evenly. This dormancy mechanism can save energy of nodes by keeping in sleep temperately . Simulation results show that the proposed strategy can efficiently enhance the lifetime of cluster and the lifetime of whole WSNs.展开更多
基金supported by the National Nature Science Foundation of China (61170169, 61170168)
文摘Ambient Assisted Living(AAL) is becoming an important research field. Many technologies have emerged related with pervasive computing vision, which can give support for AAL. One of the most reliable approaches is based on wireless sensor networks(WSNs). In this paper, we propose a coverage-aware unequal clustering protocol with load separation(CUCPLS) for data gathering of AAL applications based on WSNs. Firstly, the coverage overlap factor for nodes is introduced that accounts for the degree of target nodes covered. In addition, to balance the intra-cluster and inter-cluster energy consumptions, different competition radiuses of CHs are computed theoretically in different rings, and smaller clusters are formed near the sink. Moreover, two CHs are selected in each cluster for load separation to alleviate the substantial energy consumption difference between a single CH and its member nodes. Furthermore, a backoff waiting time is adopted during the selection of the two CHs to reduce the number of control messages employed. Simulation results demonstrate that the CUCPLS not only can achieve better coverage performance, but also balance the energy consumption of a network and prolong network lifetime.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11302225,11121202 and 11327802the National Key Project of Magneto-Constrained Fusion Energy Development Program under Grant No 2013GB110002the Postdoctoral Science Foundation of China under Grant No 2014M560820
文摘The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.
基金supported by the National Natural Science Foundation of China(Nos.11402112,51405223)
文摘Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation neural network(BPNN)algorithm,are proposed to identify the loading positions individually.The feasibility of the suggested methods is evaluated through an experimental program on a carbon fiber reinforced plastic laminate.The experimental tests involve in application of four optical fiber-based sensors for strain measurement at discrete points.The sensors are specially designed fiber Bragg grating(FBG)in small diameter.The small-diameter FBG sensors are arrayed in 2-D on the laminate surface.The testing results indicate that the loading position could be detected by the proposed method.Using SVM method,the 2-D FBG sensors can approximate the loading location with maximum error less than 14 mm.However,the maximum localization error could be limited to about 1 mm by applying the BPNN algorithm.It is mainly because the convergence conditions(mean square error)can be set in advance,while SVM cannot.
文摘To aware the topology of wireless sensor networks (WSN) with time-variety, and load-balance the resource of communication and energy, an opportunistic routing protocol for WSN based on Opportunistic Routing Entropy and ant colony optimization, called ACO-TDOP, is proposed. At first, based on the second law of thermo-dynamics, we introduce the concept of Opportunistic Routing Entropy which is a parameter representing the transmission state of each node by taking into account the power left and the distance to the sink node. Then, it is proved that the problem of route thinking about Opportunistic Routing Entropy is shown to be NP-hard. So the protocol, ACO-TDOP, is proposed. At last, numerical results confirm that the ACO-TDOP is energy conservative and throughput gainful compared with other two existing routing protocols, and show that it is efficacious to analyze and uncover fundamental of message transmission with Opportunistic Routing in wireless network using the second law of thermodynamics.
文摘Wireless sensor networks are characterized by multihop wireless links and resource constrained nodes. In terms of data collection and forwarding scheduling, this paper investigates the load balancing in sensor nodes and wireless link based on the performance of wireless sensor networks. Leveraging the property of dissimilarity distribution, a method to quantitatively evaluate the benefits of load balancing is presented, in order to access the profitability. Then a novel Dynamic Load Balancing of Overlay-based WSN (DLBO) algorithm has been put forward. In particular, the tradeoff between transferring ratio and the load imbalance among nodes is discussed. The load balancing method in this paper outperforms others based on balancing factor, different nodes number and data scales of applications. The proposed model and analytical results can be effectively applied for reliability analysis for other wireless applications (e.g., persistent data delivery is involved).
文摘Aiming at the problem that node load is rarely considered in existing clustering routing algorithm for Wireless Sensor Networks (WSNs), a dynamic clustering routing algorithm for WSN is presented in this paper called DCRCL (Dynamic Clustering Routing Considering Load). This algorithm is comprised of three phases including cluster head (CH) selection, cluster setup and inter-cluster routing. First, the CHs are selected based on residual energy and node load. Then the non-CH nodes choose a cluster by comparing the cost function of its neighbor CHs. At last, each CH communicates with base station by using multi-hop communication. The simulation results show that comparing with the existing one, the techniques life cycle and date volume of the network are increased by 30.7 percent and 29.8 percent respectively by using the proposed algorithm DCRCL.
文摘Research interest in sensor networks routing largely considers minimization of energy consumption as a major performance criterion to provide maximum sensors network lifetime. When considering energy conservation, routing protocols should also be designed to achieve fault tolerance in communications. Moreover, due to dynamic topology and random deployment, incorporating reliability into protocols for WSNs is very important. Hence, we propose an improved scalable clustering-based load balancing scheme (SCLB) in this paper. In SCLB scheme, scalability is achieved by dividing the network into overlapping multihop clusters each with its own cluster head node. Simulation results show that the proposed scheme achieves longer network lifetime with desirable reliability at the initial state compare with the existing multihop load balancing approach.
文摘Despite the increasing popularity of mechanized coal mining, there are no convenient and accurate means available to measure the loads of powered supports. The measurement of such loads is important for monitoring mine pressure and ensuring production safety. The load-carrying features of a powered support were used to develop a method for load measurement using the mag-netoelastic principle. A cross bridge-type magnetoelastic stress sensor was designed for the support structures to measure the different parts of the supports. Tests on single-body hydraulic cylinders and simulated linkages showed that an approximately linear relationship between the values of the sensor output signal and the loads borne by the hydraulic cylinders or linkages. The results were used to analyze the load-carrying measurements of powered supports with the cross bridge-type magnetoelastic stress sensor.
文摘Load-balance is an important issue in wireless sensor networks (WSNs), especially in WSNs with hierarchical structure. Energy consumed unevenly will bring the production of hot spots. Hot spot will cause WSNs to divide some unconnected sub-networks and shorten the lifetime of WSNs. To tackle this problem, a load-balance mechanism is proposed based on minority game (MG) with dormancy strategy. This mechanism can cause the rich behaviors of cooperation , prolong lifetime of WSNs, and keep energy consumed evenly. This dormancy mechanism can save energy of nodes by keeping in sleep temperately . Simulation results show that the proposed strategy can efficiently enhance the lifetime of cluster and the lifetime of whole WSNs.
