With the rapid development of Internet technology,the application of electronic circuit simulation technology is more and more extensive,and now it has been applied to integrated circuit design.Because the electronic ...With the rapid development of Internet technology,the application of electronic circuit simulation technology is more and more extensive,and now it has been applied to integrated circuit design.Because the electronic circuit simulation technology has high efficiency,flexible and simple application,as well as stable performance,it has shown more and more good application prospects in integrated circuit design.Based on the strong development trend of electronic circuit simulation technology,it will be more and more widely used in daily life in the future,so the research on electronic circuit simulation technology is more and more in-depth.In this paper,the application of electronic circuit technology in integrated circuit design is studied,hoping that the technology can provide a more concise and efficient research and development way for electronic applications.展开更多
Dominant technology formation is the key for the hightech industry to“cross the chasm”and gain an established foothold in the market(and hence disrupt the regime).Therefore,a stimulus-response model is proposed to i...Dominant technology formation is the key for the hightech industry to“cross the chasm”and gain an established foothold in the market(and hence disrupt the regime).Therefore,a stimulus-response model is proposed to investigate the dominant technology by exploring its formation process and mechanism.Specifically,based on complex adaptive system theory and the basic stimulus-response model,we use a combination of agent-based modeling and system dynamics modeling to capture the interactions between dominant technology and the socio-technical landscape.The results indicate the following:(i)The dynamic interaction is“stimulus-reaction-selection”,which promotes the dominant technology’s formation.(ii)The dominant technology’s formation can be described as a dynamic process in which the adaptation intensity of technology standards increases continuously until it becomes the leading technology under the dual action of internal and external mechanisms.(iii)The dominant technology’s formation in the high-tech industry is influenced by learning ability,the number of adopting users and adaptability.Therein,a“critical scale”of learning ability exists to promote the formation of leading technology:a large number of adopting users can promote the dominant technology’s formation by influencing the adaptive response of technology standards to the socio-technical landscape and the choice of technology standards by the socio-technical landscape.There is a minimum threshold and a maximum threshold for the role of adaptability in the dominant technology’s formation.(iv)The socio-technical landscape can promote the leading technology’s shaping in the high-tech industry,and different elements have different effects.This study promotes research on the formation mechanism of dominant technology in the high-tech industry,presents new perspectives and methods for researchers,and provides essential enlightenment for managers to formulate technology strategies.展开更多
Safety is paramount in coal mining as it affects efficiency.Thus,it is essential to enhance the management of coal mine safety.With the ongoing advancement of modern technologies,more innovative solutions are being in...Safety is paramount in coal mining as it affects efficiency.Thus,it is essential to enhance the management of coal mine safety.With the ongoing advancement of modern technologies,more innovative solutions are being integrated into the safety management of coal mining,including virtual simulation technology.This paper focuses on analyzing and researching the application of virtual simulation technology in the safety management of coal mining,providing insights for reference.展开更多
This paper explores the integration of simulation technology in Engineering Mechanics(EM)teaching in vocational colleges.A case study was conducted using the tensile test as an example,and digital resources,such as co...This paper explores the integration of simulation technology in Engineering Mechanics(EM)teaching in vocational colleges.A case study was conducted using the tensile test as an example,and digital resources,such as colored Mises stress nephograms,were obtained.These resources were integrated into the original curriculum to conduct teaching experiments.The results show that the use of digital resources significantly improved the quality of teaching in EM.The integration of simulation technology in EM teaching provides a promising direction for the improvement of vocational education and the cultivation of high-quality skilled talents.The development and application of more simulation-based teaching cases should be studied by scholars.展开更多
Virtual simulation technology is the integration of virtual reality technology and augmented reality technology, with intuitionistic, practical and experiential, it can fully meet the needs of different scenes and ope...Virtual simulation technology is the integration of virtual reality technology and augmented reality technology, with intuitionistic, practical and experiential, it can fully meet the needs of different scenes and operation needs of interior design course teaching, and provide students with a full sense of immersion, independent operation and exploration of open space. The fundamental purpose of this study on the application of virtual simulation technology in interior design course teaching is to promote the modernization of interior design course teaching and improve the efficiency of teaching. This paper briefly expounds the concept of virtual simulation technology and interior design course, analyzes the limitations and shortcomings of interior design course teaching and implementation, and discusses the advantages of its application in interior design course from the technical point of view. Finally, the paper puts forward three application steps of virtual simulation technology in interior design course teaching and puts forward the implementation strategy of applying technology to carry out teaching based on the perspective of students, in order to provide valuable reference for the modernization of interior design course teaching.展开更多
This research focuses on the seismic responses of the historic masonry minarets,conducted through the creation of a digital twin model using finite element methods.The study initiated the development of a comprehensiv...This research focuses on the seismic responses of the historic masonry minarets,conducted through the creation of a digital twin model using finite element methods.The study initiated the development of a comprehensive model in the ANSYS Workbench,supplemented by operational modal analysis(OMA),to ascertain the dynamic characteristics of the minaret.The alignment of numerical and experimental frequency data was achieved using the response surface method(RSM)within ANSYS Workbench DesignXplorer.This process resulted in the establishment of a digital twin,accurately representing the physical minaret in a virtual environment.Blender^(■)software was then used to simulate the effects of two consecutive earthquakes in Türkiye that occurred on February 6,2023.The simulations highlighted the heightened susceptibility of the minaret,especially in its upper sections,to consecutive seismic activities,culminating in significant damage and collapse.This innovative approach,merging traditional engineering methods with a cutting-edge digital simulation,provides a profound insight into the seismic behavior of historical structures.The research underscores the importance of advanced seismic modeling for the effective preservation and resilience of architectural heritage sites against earthquake risks.展开更多
Injection-production coupling(IPC) technology holds substantial potential for boosting oil recovery and enhancing economic efficiency.Despite this potential,discussion on gas injection coupling,especially in relation ...Injection-production coupling(IPC) technology holds substantial potential for boosting oil recovery and enhancing economic efficiency.Despite this potential,discussion on gas injection coupling,especially in relation to microscopic mechanisms,remains relatively sparse.This study utilizes microscopic visualization experiments to investigate the mechanisms of residual oil mobilization under various IPC scenarios,complemented by mechanical analysis at different stages.The research quantitatively assesses the degree of microscopic oil recovery and the distribution of residual oil across different injection-production methods.Findings reveal that during the initial phase of continuous gas injection(CGI),the process closely mimics miscible displacement,gradually transitioning to immiscible displacement as CO_(2)extraction progresses.Compared to CGI,the asynchronous injection-production(AIP) method improved the microscopic oil recovery rate by 6.58%.This enhancement is mainly attributed to significant variations in the pressure field in the AIP method,which facilitate the mobilization of columnar and porous re sidual oil.Furthermo re,the synchronous cycle injection(SCI) method increased microscopic oil recovery by 13.77% and 7.19% compared to CGI and AIP,respectively.In the SCI method,membrane oil displays filame ntary and Karman vo rtex street flow patterns.The dissolved and expanded crude oil te nds to accumulate and grow at the oil-solid interface due to adhesive forces,thereby reducing migration resistance.The study findings provide a theoretical foundation for improving oil recovery in lowpermeability reservoirs.展开更多
Drilling and blasting,characterized by their efficiency,ubiquity,and cost-effectiveness,have emerged as predominant techniques in rock excavation;however,they are accompanied by enormous destructive power.Accurately c...Drilling and blasting,characterized by their efficiency,ubiquity,and cost-effectiveness,have emerged as predominant techniques in rock excavation;however,they are accompanied by enormous destructive power.Accurately controlling the blasting energy and achieving the directional fracture of a rock mass have become common problems in the field.A two-dimensional blasting(2D blasting)technique was proposed that utilizes the characteristic that the tensile strength of a rock mass is significantly lower than its compressive strength.After blasting,only a 2D crack surface is generated along the predetermined direction,eliminating the damage to the reserved rock mass caused by conventional blasting.However,the interior of a natural rock mass is a"black box",and the process of crack propagation is difficult to capture,resulting in an unclear 2D blasting mechanism.To this end,a single-hole polymethyl methacrylate(PMMA)test piece was used to conduct a 2D blasting experiment with the help of a high-speed camera to capture the dynamic crack propagation process and the digital image correlation(DIC)method to analyze the evolution law of surface strain on the test piece.On this basis,a three-dimensional(3D)finite element model was established based on the progressive failure theory to simulate the stress,strain,damage,and displacement evolution process of the model under 2D blasting.The simulation results were consistent with the experimental results.The research results reveal the 2D blasting mechanism and provide theoretical support for the application of 2D blasting technology in the field of rock excavation.展开更多
The solar cells (SCs) are the most typical devices used toconvert the solar energy into electricity to help relieving the energyshortage crisis. In the photovoltaic (PV) communities, improvingthe power-conversion effi...The solar cells (SCs) are the most typical devices used toconvert the solar energy into electricity to help relieving the energyshortage crisis. In the photovoltaic (PV) communities, improvingthe power-conversion efficiency (PCE) of SC keeps tobe a long-term objective. In the past decades, enormous effortshave been paid on exploring various new structural scenariosor PV mechanisms (e.g., near-field thermophotovoltaicand hot-carrier SCs) in order to approach or even break theShockley-Queisser (SQ) efficiency limits of various SCs[1].展开更多
This paper mainly discusses the following problems: the important meaning and special function of simulation system; the definition, contents and relationship of system and system simulation science; the definition an...This paper mainly discusses the following problems: the important meaning and special function of simulation system; the definition, contents and relationship of system and system simulation science; the definition and technology of simulation system and its equipments; and systematic description and exploration in relation to the developing trend of system simulation science and simulation system technology.展开更多
With the application of virtual reality technology to realize interactive display of virtual museum as content of study,we analyze the problems in the current virtual museum system.Taking Daqing Museum for example,we ...With the application of virtual reality technology to realize interactive display of virtual museum as content of study,we analyze the problems in the current virtual museum system.Taking Daqing Museum for example,we develop a 2.5D(between 2D and 3D) architectural modeling technology,and combine it with virtual reality technology,to create the virtual museum simulation platform.By establishing the virtual simulation platform of Daqing Museum,we verify the feasibility of using 2.5D architectural modeling technology to build the virtual museum system,create a virtual simulation platform with practical value,and show the bright future of virtual museum based on 2.5D virtual reality technology.展开更多
During subway operation,various factors will cause long-term land subsidence,such as the vibration subsidence of foundation soil caused by train vibration load,incomplete consolidation deformation of foundation soil d...During subway operation,various factors will cause long-term land subsidence,such as the vibration subsidence of foundation soil caused by train vibration load,incomplete consolidation deformation of foundation soil during tunnel construction,dense buildings and structures in the vicinity of the tunnel,and changes in water level in the stratum where the tunnel is located.The monitoring of long-term land subsidence during subway operation in high-density urban areas differs from that in low-density urban construction areas.The former is the gathering point of the entire urban population.There are many complex buildings around the project,busy road traffic,high pedestrian flow,and less vegetation cover.Several existing items requiremonitoring.However,monitoring distance is long,and providing early warning is difficult.This study uses the 2.8 km operation line between Wulin Square station and Ding’an Road station of Hangzhou Subway Line 1 as an example to propose the integrated method of DInSAR-GPS-GIS technology and the key algorithm for long-term land subsidence deformation.Then,it selects multiscene image data to analyze long-termland subsidence of high-density urban areas during subway operation.Results show that long-term land subsidence caused by the operation of Wulin Square station to Ding’an Road station of Hangzhou Subway Line 1 is small,with maximumsubsidence of 30.64 mm,and minimumsubsidence of 11.45 mm,and average subsidence ranging from 19.27 to 21.33 mm.And FLAC3D software was used to verify the monitoring situation,using the geological conditions of the soil in the study area and the tunnel profile to simulate the settlement under vehicle load,and the simulation results tended to be consistent with the monitoring situation.展开更多
With the development of automobile lightweight,it is very necessary to apply the ultra-high strength steel parts manufactured by hot stamping,which offers the possibility to reduce the weight of automobiles and mainta...With the development of automobile lightweight,it is very necessary to apply the ultra-high strength steel parts manufactured by hot stamping,which offers the possibility to reduce the weight of automobiles and maintain the safety requirement.In order to complete hot stamping,it is important to design the structure of parts reasonably,which is related with reasonable matching of strength.The objective of this paper is to guide the design of parts manufactured by hot stamping and find the forming technical requirements of vehicle performance.Through experiments,the paper obtains the stress and strain curves at different deformation temperatures and strain rates.Based on experimental data, the constitutive relationship model is established which can reflect the deformation capacity of ultra-high strength steel during the process of hot stamping.Combined with finite element simulation results of hot stamping by commercial software AUTOFORM,transfer path of load and matching law of strength,the paper determines the design criteria and forming technical requirements of parts manufactured by hot stamping.At the same time,the impact performance of front cross member internal plate is taken into consideration.展开更多
With the continuous promotion of computer technology, the application system of virtual simulation technology has been further optimized and improved, and has been widely used in various fields of social development, ...With the continuous promotion of computer technology, the application system of virtual simulation technology has been further optimized and improved, and has been widely used in various fields of social development, such as urban construction, interior design, industrial simulation and tourism teaching. China's three-dimensional animation production started relatively late, but has achieved good results with the support of related advanced technology in the process of development. Computer virtual simulation technology is an important technical support in the production of three-dimensional animation. In this paper, firstly, the related content of computer virtual simulation technology was introduced. Then, the specific application of this technology in the production of three-dimensional animation was further elaborated, so as to provide some reference for the improvement of the production effect of three-dimensional animation in the future.展开更多
By constructing the evolutionary game model among the government,enterprises and consumers,the paper analyzes the condition that the profit and loss relationship of the game subjects and their behavior strategies reac...By constructing the evolutionary game model among the government,enterprises and consumers,the paper analyzes the condition that the profit and loss relationship of the game subjects and their behavior strategies reach the stable state in the green technology innovation system,and uses MATLAB to conduct data simulation analysis.The results show that the government,enterprises and consumers have path-dependent behavior choices.The larger the government incentive coefficient and subsidy coefficient is not the better,but the larger the subsidy and subsidy coefficient will hinder the green technology innovation.Government punitive measures will promote green technology innovation,but high innovation subsidies will restrain the government’s environmental regulation.Therefore,the government should further improve environmental regulation policies,increase enterprises’enthusiasm for green technology innovation and consumers’acceptance of green products,and promote the development of green technology innovation.展开更多
The developing process of simulation technology is discussed in view of its development, maturation and further development. The applications of simulation technology in the fields of national economy are introduced. ...The developing process of simulation technology is discussed in view of its development, maturation and further development. The applications of simulation technology in the fields of national economy are introduced. Finally, the level and status quo of simulation technology home and overseas are analyzed, and its future trend in the new century is presented.展开更多
The informatization of higher vocational education is the future development trend,and it is also encouraged and promoted by the Ministry of Education.This article focuses on the road and bridge major,combined with th...The informatization of higher vocational education is the future development trend,and it is also encouraged and promoted by the Ministry of Education.This article focuses on the road and bridge major,combined with the author’s experience in introducing virtual simulation and three-dimensional(3D)animation technology into relevant course teaching in recent years,discusses the application of virtual simulation and 3D animation technology in higher vocational education and promotes classroom revolution,to obtain better teaching effect.展开更多
Based on the teaching characteristics in military academies,simulation technology has been applied in their teaching methods.The issues faced in the application of virtual simulation technology to relevant professiona...Based on the teaching characteristics in military academies,simulation technology has been applied in their teaching methods.The issues faced in the application of virtual simulation technology to relevant professional teaching in armed police academies are analyzed in this article.Secondly,in view of the difficulties encountered in the organization and implementation of practical teaching as well as in the development of the current teaching,this article explores the impact of simulation technology in its application in teaching methods,training practices,and teaching channels.展开更多
Power supply transformation technology is a required course for new energy major, which is a comprehensive course. Under the traditional teaching mode, students have no concept of waveform, which brings many difficult...Power supply transformation technology is a required course for new energy major, which is a comprehensive course. Under the traditional teaching mode, students have no concept of waveform, which brings many difficulties to teaching and experiment. A power transformation technology based on PSIM simulation is proposed. Before class, students solve the task of building the simulation model, and then introduce the knowledge points. This can not only make up for the lack of experimental facilities and also stimulate students interest in learning. Classroom teaching practice shows that this method can effectively improve the teaching and experiment efficiency.展开更多
文摘With the rapid development of Internet technology,the application of electronic circuit simulation technology is more and more extensive,and now it has been applied to integrated circuit design.Because the electronic circuit simulation technology has high efficiency,flexible and simple application,as well as stable performance,it has shown more and more good application prospects in integrated circuit design.Based on the strong development trend of electronic circuit simulation technology,it will be more and more widely used in daily life in the future,so the research on electronic circuit simulation technology is more and more in-depth.In this paper,the application of electronic circuit technology in integrated circuit design is studied,hoping that the technology can provide a more concise and efficient research and development way for electronic applications.
基金supported by the Shanghai Philosophy and Social Science Foundation(2022ECK004)Shanghai Soft Science Research Project(23692123400)。
文摘Dominant technology formation is the key for the hightech industry to“cross the chasm”and gain an established foothold in the market(and hence disrupt the regime).Therefore,a stimulus-response model is proposed to investigate the dominant technology by exploring its formation process and mechanism.Specifically,based on complex adaptive system theory and the basic stimulus-response model,we use a combination of agent-based modeling and system dynamics modeling to capture the interactions between dominant technology and the socio-technical landscape.The results indicate the following:(i)The dynamic interaction is“stimulus-reaction-selection”,which promotes the dominant technology’s formation.(ii)The dominant technology’s formation can be described as a dynamic process in which the adaptation intensity of technology standards increases continuously until it becomes the leading technology under the dual action of internal and external mechanisms.(iii)The dominant technology’s formation in the high-tech industry is influenced by learning ability,the number of adopting users and adaptability.Therein,a“critical scale”of learning ability exists to promote the formation of leading technology:a large number of adopting users can promote the dominant technology’s formation by influencing the adaptive response of technology standards to the socio-technical landscape and the choice of technology standards by the socio-technical landscape.There is a minimum threshold and a maximum threshold for the role of adaptability in the dominant technology’s formation.(iv)The socio-technical landscape can promote the leading technology’s shaping in the high-tech industry,and different elements have different effects.This study promotes research on the formation mechanism of dominant technology in the high-tech industry,presents new perspectives and methods for researchers,and provides essential enlightenment for managers to formulate technology strategies.
文摘Safety is paramount in coal mining as it affects efficiency.Thus,it is essential to enhance the management of coal mine safety.With the ongoing advancement of modern technologies,more innovative solutions are being integrated into the safety management of coal mining,including virtual simulation technology.This paper focuses on analyzing and researching the application of virtual simulation technology in the safety management of coal mining,providing insights for reference.
基金Science and Technology Key Project of Beijing Polytechnic(Project number:2024X008-KXZ)。
文摘This paper explores the integration of simulation technology in Engineering Mechanics(EM)teaching in vocational colleges.A case study was conducted using the tensile test as an example,and digital resources,such as colored Mises stress nephograms,were obtained.These resources were integrated into the original curriculum to conduct teaching experiments.The results show that the use of digital resources significantly improved the quality of teaching in EM.The integration of simulation technology in EM teaching provides a promising direction for the improvement of vocational education and the cultivation of high-quality skilled talents.The development and application of more simulation-based teaching cases should be studied by scholars.
基金funded by Provincial Teaching Reform and Innovation Project:Shanxi University Teaching Reform Innovation Project,Project No.J20230051.Education Department of Shanxi Province 2023.7.
文摘Virtual simulation technology is the integration of virtual reality technology and augmented reality technology, with intuitionistic, practical and experiential, it can fully meet the needs of different scenes and operation needs of interior design course teaching, and provide students with a full sense of immersion, independent operation and exploration of open space. The fundamental purpose of this study on the application of virtual simulation technology in interior design course teaching is to promote the modernization of interior design course teaching and improve the efficiency of teaching. This paper briefly expounds the concept of virtual simulation technology and interior design course, analyzes the limitations and shortcomings of interior design course teaching and implementation, and discusses the advantages of its application in interior design course from the technical point of view. Finally, the paper puts forward three application steps of virtual simulation technology in interior design course teaching and puts forward the implementation strategy of applying technology to carry out teaching based on the perspective of students, in order to provide valuable reference for the modernization of interior design course teaching.
基金product of the research project titled,Video Camera Based Structural Health Monitoring of Historic Masonry Minarets and Development of a Long-Term Decision-Making Model Based on Deep Learning Method(Project No.222M140)supported by TÜBİTAK 1001-Scientific and the Technological Research Projects Support Program.
文摘This research focuses on the seismic responses of the historic masonry minarets,conducted through the creation of a digital twin model using finite element methods.The study initiated the development of a comprehensive model in the ANSYS Workbench,supplemented by operational modal analysis(OMA),to ascertain the dynamic characteristics of the minaret.The alignment of numerical and experimental frequency data was achieved using the response surface method(RSM)within ANSYS Workbench DesignXplorer.This process resulted in the establishment of a digital twin,accurately representing the physical minaret in a virtual environment.Blender^(■)software was then used to simulate the effects of two consecutive earthquakes in Türkiye that occurred on February 6,2023.The simulations highlighted the heightened susceptibility of the minaret,especially in its upper sections,to consecutive seismic activities,culminating in significant damage and collapse.This innovative approach,merging traditional engineering methods with a cutting-edge digital simulation,provides a profound insight into the seismic behavior of historical structures.The research underscores the importance of advanced seismic modeling for the effective preservation and resilience of architectural heritage sites against earthquake risks.
基金supported by the National Natural Science Foundation of China (Nos.52374064,51974347,52474072)the Shandong Provincial Universities Youth Innovation and Technology Support Program (2022KJ065)。
文摘Injection-production coupling(IPC) technology holds substantial potential for boosting oil recovery and enhancing economic efficiency.Despite this potential,discussion on gas injection coupling,especially in relation to microscopic mechanisms,remains relatively sparse.This study utilizes microscopic visualization experiments to investigate the mechanisms of residual oil mobilization under various IPC scenarios,complemented by mechanical analysis at different stages.The research quantitatively assesses the degree of microscopic oil recovery and the distribution of residual oil across different injection-production methods.Findings reveal that during the initial phase of continuous gas injection(CGI),the process closely mimics miscible displacement,gradually transitioning to immiscible displacement as CO_(2)extraction progresses.Compared to CGI,the asynchronous injection-production(AIP) method improved the microscopic oil recovery rate by 6.58%.This enhancement is mainly attributed to significant variations in the pressure field in the AIP method,which facilitate the mobilization of columnar and porous re sidual oil.Furthermo re,the synchronous cycle injection(SCI) method increased microscopic oil recovery by 13.77% and 7.19% compared to CGI and AIP,respectively.In the SCI method,membrane oil displays filame ntary and Karman vo rtex street flow patterns.The dissolved and expanded crude oil te nds to accumulate and grow at the oil-solid interface due to adhesive forces,thereby reducing migration resistance.The study findings provide a theoretical foundation for improving oil recovery in lowpermeability reservoirs.
基金supported by the National Natural Science Foundation of China(Grant Nos.52404155 and 52304111)State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing(Grant No.XD2024006).
文摘Drilling and blasting,characterized by their efficiency,ubiquity,and cost-effectiveness,have emerged as predominant techniques in rock excavation;however,they are accompanied by enormous destructive power.Accurately controlling the blasting energy and achieving the directional fracture of a rock mass have become common problems in the field.A two-dimensional blasting(2D blasting)technique was proposed that utilizes the characteristic that the tensile strength of a rock mass is significantly lower than its compressive strength.After blasting,only a 2D crack surface is generated along the predetermined direction,eliminating the damage to the reserved rock mass caused by conventional blasting.However,the interior of a natural rock mass is a"black box",and the process of crack propagation is difficult to capture,resulting in an unclear 2D blasting mechanism.To this end,a single-hole polymethyl methacrylate(PMMA)test piece was used to conduct a 2D blasting experiment with the help of a high-speed camera to capture the dynamic crack propagation process and the digital image correlation(DIC)method to analyze the evolution law of surface strain on the test piece.On this basis,a three-dimensional(3D)finite element model was established based on the progressive failure theory to simulate the stress,strain,damage,and displacement evolution process of the model under 2D blasting.The simulation results were consistent with the experimental results.The research results reveal the 2D blasting mechanism and provide theoretical support for the application of 2D blasting technology in the field of rock excavation.
文摘The solar cells (SCs) are the most typical devices used toconvert the solar energy into electricity to help relieving the energyshortage crisis. In the photovoltaic (PV) communities, improvingthe power-conversion efficiency (PCE) of SC keeps tobe a long-term objective. In the past decades, enormous effortshave been paid on exploring various new structural scenariosor PV mechanisms (e.g., near-field thermophotovoltaicand hot-carrier SCs) in order to approach or even break theShockley-Queisser (SQ) efficiency limits of various SCs[1].
文摘This paper mainly discusses the following problems: the important meaning and special function of simulation system; the definition, contents and relationship of system and system simulation science; the definition and technology of simulation system and its equipments; and systematic description and exploration in relation to the developing trend of system simulation science and simulation system technology.
文摘With the application of virtual reality technology to realize interactive display of virtual museum as content of study,we analyze the problems in the current virtual museum system.Taking Daqing Museum for example,we develop a 2.5D(between 2D and 3D) architectural modeling technology,and combine it with virtual reality technology,to create the virtual museum simulation platform.By establishing the virtual simulation platform of Daqing Museum,we verify the feasibility of using 2.5D architectural modeling technology to build the virtual museum system,create a virtual simulation platform with practical value,and show the bright future of virtual museum based on 2.5D virtual reality technology.
基金financial supports for this research project by the National Natural Science Foundation of China(Nos.41602308,41967037)supported by Zhejiang Provincial Natural Science Foundation of China under Grant No.LY20E080005+1 种基金funded by National Key Research and Development Projects of China(No.2019YFC507502)Guangxi Science and Technology Plan Project(No.RZ2100000161).
文摘During subway operation,various factors will cause long-term land subsidence,such as the vibration subsidence of foundation soil caused by train vibration load,incomplete consolidation deformation of foundation soil during tunnel construction,dense buildings and structures in the vicinity of the tunnel,and changes in water level in the stratum where the tunnel is located.The monitoring of long-term land subsidence during subway operation in high-density urban areas differs from that in low-density urban construction areas.The former is the gathering point of the entire urban population.There are many complex buildings around the project,busy road traffic,high pedestrian flow,and less vegetation cover.Several existing items requiremonitoring.However,monitoring distance is long,and providing early warning is difficult.This study uses the 2.8 km operation line between Wulin Square station and Ding’an Road station of Hangzhou Subway Line 1 as an example to propose the integrated method of DInSAR-GPS-GIS technology and the key algorithm for long-term land subsidence deformation.Then,it selects multiscene image data to analyze long-termland subsidence of high-density urban areas during subway operation.Results show that long-term land subsidence caused by the operation of Wulin Square station to Ding’an Road station of Hangzhou Subway Line 1 is small,with maximumsubsidence of 30.64 mm,and minimumsubsidence of 11.45 mm,and average subsidence ranging from 19.27 to 21.33 mm.And FLAC3D software was used to verify the monitoring situation,using the geological conditions of the soil in the study area and the tunnel profile to simulate the settlement under vehicle load,and the simulation results tended to be consistent with the monitoring situation.
基金Project in the National Science & Technology Pillar Program during the"Twelfth Five-year Plan"Period(No.2011BAG03B02No.2011BAG03B06)
文摘With the development of automobile lightweight,it is very necessary to apply the ultra-high strength steel parts manufactured by hot stamping,which offers the possibility to reduce the weight of automobiles and maintain the safety requirement.In order to complete hot stamping,it is important to design the structure of parts reasonably,which is related with reasonable matching of strength.The objective of this paper is to guide the design of parts manufactured by hot stamping and find the forming technical requirements of vehicle performance.Through experiments,the paper obtains the stress and strain curves at different deformation temperatures and strain rates.Based on experimental data, the constitutive relationship model is established which can reflect the deformation capacity of ultra-high strength steel during the process of hot stamping.Combined with finite element simulation results of hot stamping by commercial software AUTOFORM,transfer path of load and matching law of strength,the paper determines the design criteria and forming technical requirements of parts manufactured by hot stamping.At the same time,the impact performance of front cross member internal plate is taken into consideration.
文摘With the continuous promotion of computer technology, the application system of virtual simulation technology has been further optimized and improved, and has been widely used in various fields of social development, such as urban construction, interior design, industrial simulation and tourism teaching. China's three-dimensional animation production started relatively late, but has achieved good results with the support of related advanced technology in the process of development. Computer virtual simulation technology is an important technical support in the production of three-dimensional animation. In this paper, firstly, the related content of computer virtual simulation technology was introduced. Then, the specific application of this technology in the production of three-dimensional animation was further elaborated, so as to provide some reference for the improvement of the production effect of three-dimensional animation in the future.
文摘By constructing the evolutionary game model among the government,enterprises and consumers,the paper analyzes the condition that the profit and loss relationship of the game subjects and their behavior strategies reach the stable state in the green technology innovation system,and uses MATLAB to conduct data simulation analysis.The results show that the government,enterprises and consumers have path-dependent behavior choices.The larger the government incentive coefficient and subsidy coefficient is not the better,but the larger the subsidy and subsidy coefficient will hinder the green technology innovation.Government punitive measures will promote green technology innovation,but high innovation subsidies will restrain the government’s environmental regulation.Therefore,the government should further improve environmental regulation policies,increase enterprises’enthusiasm for green technology innovation and consumers’acceptance of green products,and promote the development of green technology innovation.
文摘The developing process of simulation technology is discussed in view of its development, maturation and further development. The applications of simulation technology in the fields of national economy are introduced. Finally, the level and status quo of simulation technology home and overseas are analyzed, and its future trend in the new century is presented.
基金2021 Chongqing Energy Vocational College Science and Technology Department Teaching Reform Project"Discussion and Practice of Teaching Reform of"Bridge and Culvert Engineering Construction Technology"Based on Road and Bridge Simulation Software"(202106)。
文摘The informatization of higher vocational education is the future development trend,and it is also encouraged and promoted by the Ministry of Education.This article focuses on the road and bridge major,combined with the author’s experience in introducing virtual simulation and three-dimensional(3D)animation technology into relevant course teaching in recent years,discusses the application of virtual simulation and 3D animation technology in higher vocational education and promotes classroom revolution,to obtain better teaching effect.
文摘Based on the teaching characteristics in military academies,simulation technology has been applied in their teaching methods.The issues faced in the application of virtual simulation technology to relevant professional teaching in armed police academies are analyzed in this article.Secondly,in view of the difficulties encountered in the organization and implementation of practical teaching as well as in the development of the current teaching,this article explores the impact of simulation technology in its application in teaching methods,training practices,and teaching channels.
文摘Power supply transformation technology is a required course for new energy major, which is a comprehensive course. Under the traditional teaching mode, students have no concept of waveform, which brings many difficulties to teaching and experiment. A power transformation technology based on PSIM simulation is proposed. Before class, students solve the task of building the simulation model, and then introduce the knowledge points. This can not only make up for the lack of experimental facilities and also stimulate students interest in learning. Classroom teaching practice shows that this method can effectively improve the teaching and experiment efficiency.
