An accurate energy calibration of a 5＂× 2＂ BC501A liquid scintillator-based neutron detector by means of photon sources and the unfolding of pulse height spectra are described. The photon responses were measure...An accurate energy calibration of a 5＂× 2＂ BC501A liquid scintillator-based neutron detector by means of photon sources and the unfolding of pulse height spectra are described. The photon responses were measured with 22Na, 137Cs and 54Mn photon sources and simulated using the GRESP code, which was developed at the Physiknlisch Technische Bundesanstalt in Germany. Pulse height spectra produced by three different photon sources were employed to investigate the effects of the unfolding techniques. It was found that the four unfolding codes of the HEPRO and UMG3.3 packages, including GRAVEL, UNFANA, MIEKE and MAXED, performed well with the test spectra and produced generally consistent results. They could therefore be used to obtain neutron energy spectra in toknmak experiments.展开更多
In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in...In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in different diameters and liquid heights has been realized using the shear stress transport(SST)turbulence model and the Gamma Theta transition(GTT)model.In the ANSYS CFX software,two models are used in conjunction with an automatic wall treatment which allows for a smooth shift from a wall function(WF)to a low turbulent-Re near wall formulation(LTRW).The results of the models coupled with LTRW are closer to the experimental results compared with the models with WF,indicating that LTRW is more appropriate for the prediction of boundary layer characteristics of orifice flow.Simulation results show that the flow conditions of orifices change with the variation of liquid height.With respect to the turbulence in orifice,the SST model coupled with LTRW is recommended.However,with respect to the transition to turbulence in orifice with an increase in liquid height,the predictions of GTT model coupled with LTRW are superior to those obtained using other models.展开更多
The water-air and Wood’s metal-air systems are modeled by means of Computational Fluid Dynamics to study the interaction between a liquid surface and an impinging air jet under the near field blowing conditions. The ...The water-air and Wood’s metal-air systems are modeled by means of Computational Fluid Dynamics to study the interaction between a liquid surface and an impinging air jet under the near field blowing conditions. The effect of the air jet velocity, the height of the injection lance, and the density of the liquid on the depth of the formed cavity is numerically studied. The CFD results of the cavity depth are compared with results previously reported by other authors. The emergence of the splashing phenomenon is predicted in terms of the critical velocity for each liquid-air system. Besides, the blowing number indicates that the drop generation rate is not significant for jet velocities below the critical velocity, and therefore neither the splashing is significant.展开更多
In order to enhance the ultrasonic degradation rate of organic solutions,a metal plate is placed at the water–air interface of the ultrasonic cleaning tank.Initially,the distribution of the acoustic field in the ultr...In order to enhance the ultrasonic degradation rate of organic solutions,a metal plate is placed at the water–air interface of the ultrasonic cleaning tank.Initially,the distribution of the acoustic field in the ultrasonic water tank was calculated using the simulation software COMSOL.The simulation results demonstrated that the utilization of the metal plate can eliminate the standing-wave acoustic field to a certain extent.Subsequently,the pixel method was selected for a quantitative comparison of the cavitation area in the flume with and without the metal plate.The results demonstrated that,under specific conditions,the area of ultrasonic cavitation in the water tank can be expanded using a metal plate.Thereafter,an acoustic degradation experiment was designed to confirm the feasibility of the simulation method.Furthermore,the impacts of the amplitude of the incident ultrasonic pressure,frequency,and the height of the liquid level in the water tank on the cavitation area were investigated.展开更多
基金supported by the State Key Development Program for Basic Research of China (Nos. 2008CB717803, 2009GB107001,2007CB209903)the Research Fund for the Doctoral Program of Higher Education of China (No. 200610011023)National Natural Science Foundation of China (No. 10875002)
文摘An accurate energy calibration of a 5＂× 2＂ BC501A liquid scintillator-based neutron detector by means of photon sources and the unfolding of pulse height spectra are described. The photon responses were measured with 22Na, 137Cs and 54Mn photon sources and simulated using the GRESP code, which was developed at the Physiknlisch Technische Bundesanstalt in Germany. Pulse height spectra produced by three different photon sources were employed to investigate the effects of the unfolding techniques. It was found that the four unfolding codes of the HEPRO and UMG3.3 packages, including GRAVEL, UNFANA, MIEKE and MAXED, performed well with the test spectra and produced generally consistent results. They could therefore be used to obtain neutron energy spectra in toknmak experiments.
基金the financial support from the National Basic Research Program of China(No.2009CB219905)the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT0936)the National Natural Science Foundation of China(No.21176172)
文摘In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in different diameters and liquid heights has been realized using the shear stress transport(SST)turbulence model and the Gamma Theta transition(GTT)model.In the ANSYS CFX software,two models are used in conjunction with an automatic wall treatment which allows for a smooth shift from a wall function(WF)to a low turbulent-Re near wall formulation(LTRW).The results of the models coupled with LTRW are closer to the experimental results compared with the models with WF,indicating that LTRW is more appropriate for the prediction of boundary layer characteristics of orifice flow.Simulation results show that the flow conditions of orifices change with the variation of liquid height.With respect to the turbulence in orifice,the SST model coupled with LTRW is recommended.However,with respect to the transition to turbulence in orifice with an increase in liquid height,the predictions of GTT model coupled with LTRW are superior to those obtained using other models.
文摘The water-air and Wood’s metal-air systems are modeled by means of Computational Fluid Dynamics to study the interaction between a liquid surface and an impinging air jet under the near field blowing conditions. The effect of the air jet velocity, the height of the injection lance, and the density of the liquid on the depth of the formed cavity is numerically studied. The CFD results of the cavity depth are compared with results previously reported by other authors. The emergence of the splashing phenomenon is predicted in terms of the critical velocity for each liquid-air system. Besides, the blowing number indicates that the drop generation rate is not significant for jet velocities below the critical velocity, and therefore neither the splashing is significant.
基金supported by the Doctoral Fund Program of Longdong University(Grant No.XYBYZK2219)the National Natural Science Foundation of China(Grant No.12274277)+1 种基金the Science and Technology Project of Gansu Province of China(Grant No.21JR11RM046)Young Doctor Fund of Gansu Education Department(Grant No.2022QB-171).
文摘In order to enhance the ultrasonic degradation rate of organic solutions,a metal plate is placed at the water–air interface of the ultrasonic cleaning tank.Initially,the distribution of the acoustic field in the ultrasonic water tank was calculated using the simulation software COMSOL.The simulation results demonstrated that the utilization of the metal plate can eliminate the standing-wave acoustic field to a certain extent.Subsequently,the pixel method was selected for a quantitative comparison of the cavitation area in the flume with and without the metal plate.The results demonstrated that,under specific conditions,the area of ultrasonic cavitation in the water tank can be expanded using a metal plate.Thereafter,an acoustic degradation experiment was designed to confirm the feasibility of the simulation method.Furthermore,the impacts of the amplitude of the incident ultrasonic pressure,frequency,and the height of the liquid level in the water tank on the cavitation area were investigated.
