With the advent of the AI era,how can students effectively utilize generative AI large models to assist in course learning?At the same time,how can teachers utilize generative AI tools and the teaching concept of OBE ...With the advent of the AI era,how can students effectively utilize generative AI large models to assist in course learning?At the same time,how can teachers utilize generative AI tools and the teaching concept of OBE to stimulate students’innovative consciousness and teamwork ability,enabling students to identify some problems in a certain industry or field and creatively propose feasible solutions,and truly achieve the cultivation of new models in software engineering course teaching with the assistance of generative AI tools?This paper presents research and practice on a new model for cultivating software engineering courses that integrates generative AI and OBE,introduces the specific process of teaching reform and practice,and finally explains the achievements of teaching reform.展开更多
Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A nov...Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A novel type of cylindrical,non-overlapping,transverse-flux,and permanent-magnet linear motor（TFPLM） is investigated,furthermore,a high power factor and less process complexity structure research is developed.The impact of magnetic leakage factor on power factor is discussed,by using the Finite Element Analysis（FEA） model of stirling engine and TFPLM,an optimization method for electro-magnetic design of TFPLM is proposed based on magnetic leakage factor.The relation between power factor and structure parameter is investigated,and a structure parameter optimization method is proposed taking power factor maximum as a goal.At last,the test bench is founded,starting experimental and generating experimental are performed,and a good agreement of simulation and experimental is achieved.The power factor is improved and the process complexity is decreased.This research provides the instruction to design high-power factor permanent-magnet linear generator.展开更多
A numerical program is built to simulate the performance of a spark ignited two-stroke free-piston engine coupled with a linear generator. The computational model combines a series of dynamic and thermodynamic equatio...A numerical program is built to simulate the performance of a spark ignited two-stroke free-piston engine coupled with a linear generator. The computational model combines a series of dynamic and thermodynamic equations that are solved simultaneously to predict the performances of the engines. The dynamic analysis performed consists of an evaluation of the frictional force and load force introduced by the generator. The thermodynamic analysis used a single zone model to describe the engine＇ s working cycle which includes intake, scavenging, compression, combustion and expansion, and to evaluate the effect of heat transfer based on the first law of thermodynamics and the ideal gas state equation. Because there is no crankshaft, a time based Wiebe equation was used to express the fraction of fuel burned in the combustion. The calculated results were validated by using the experimental data from another research group. The results indicate that the free-piston generator has some advantages over conventional engines.展开更多
In order to explore the total-pressure distortion test assessment method for a turbofan engine, a Controlled Variable Double-Baffle Distortion Generator(CVDBDG) with a horizontal symmetry moving form was developed, wh...In order to explore the total-pressure distortion test assessment method for a turbofan engine, a Controlled Variable Double-Baffle Distortion Generator(CVDBDG) with a horizontal symmetry moving form was developed, which can adjust the steady-state and time–variant distortion separately in real time. The inlet total-pressure distortion test was conducted on an afterburner turbofan engine. The distortion parameters of CVDBDG and the instability characteristics of the engine were measured. The experimental data were modeled and analyzed by using back propagation artificial neural networks, and the work envelope of CVDBDG was obtained. Based on the analysis of the data on the engine’s instability, the properties of CVDBDG used for the stability assessment were preliminarily evaluated. The results show that CVDBDG can simulate both steady-state and time–variant distortions simultaneously in a range determined by three envelopes.Under the condition of symmetric double baffles, a critical depth of insertion exists, beyond which the symmetric baffles will generate an asymmetric flow field. In the case of double baffles, compared to a single baffle, the engine exhibited different instability characteristics. Based on CVDBDG, it is expected that more efficient engine stability and durability assessment methods can be developed.展开更多
The rotor initial unbalance of an aeroengine gas generator of turboshaft engine seriously affects rotor assembly process.To reasonably optimize rotor assembly process,the effect analyses of rotor initial unbalance of ...The rotor initial unbalance of an aeroengine gas generator of turboshaft engine seriously affects rotor assembly process.To reasonably optimize rotor assembly process,the effect analyses of rotor initial unbalance of single disc and combined discs on rotor dynamic characteristics are firstly implemented in respect of the dispersity of rotor initial unbalance.It is found that the most important factors contributing to rotor vibration are the unbalances of the first stage compressor disc and the second stage turbine disc.However,reducing the mass of two discs conflicts with the control of the whole gas generator rotor balance resulting from the unbalance increase of single components.Thus,we further analyze the key control factors of affecting rotor initial unbalance,and give the strict control measures of centrifugal impeller runout in the assembly process by adjusting the angle of central tie rod axis.The purpose of this measures to make the assembly process simpler and more effective for timely controlling rotor initial unbalance.The efforts of this study validate that the proposed method is workable for the rotor tightened by a central tie rod and possesses the significant meaning of practical application in engineering.展开更多
The free-piston engine generator(FPEG)is regarded as the next generation of energy conversion system which may replace traditional engines in the future.The effect of key operational parameters like excess air ratio o...The free-piston engine generator(FPEG)is regarded as the next generation of energy conversion system which may replace traditional engines in the future.The effect of key operational parameters like excess air ratio of input mixture and ignition position on the engine performance of a dual-cylinder FPEG was investigated,and their sensitivity was analyzed in this paper.The operating compression ratio of the system is susceptible to changes in excess air ratio and ignition position.At the same time,it decreases from 15.8 to 6.6 when excess air ratio increases from 0.85 to 1.15,but it increases from 6.1 to 13.3 as ignition position increases from 15 mm to 20 mm.The operating frequency and indicated power are more sensitive to changes in excess air ratio than ignition position.But it is the opposite for the indicated thermal efficiency and friction loss.Excess air ratio and ignition position have a quite similar influence on heat transfer.Therefore,from the perspective of system operation and performance,it is preferable to keep excess air coefficient slightly below 1.0.In contrast,when selecting ignition position,it is of great importance to comprehensively consider the risk of structural damage caused by the increase in the compression ratio and in-cylinder gas pressure.展开更多
The electrical instability that frequently distinguishes the isolated networks and depends on diesel generators to supply their energy requirements leads to an operation of the diesel generator in a transient dynamic ...The electrical instability that frequently distinguishes the isolated networks and depends on diesel generators to supply their energy requirements leads to an operation of the diesel generator in a transient dynamic condition and/or at low loads. In addition, extended operation of the diesel generator at partial load develops the condensation of combustion residues on the engine cylinder walls, which, after a certain time, increases friction, reduces the efficiency of the equipment and increases its fuel consumption. On the other hand, recent regulatory changes have led to ever more stringent and evolving emission standards. Among these, the International Maritime Organization (IMO) and the Environmental Protection Agency (EPA) have implemented emission standards in order to reduce exhaust gas emitted by marine diesel engines. To phase lower emission engines as soon as possible, a Tier system was adopted. This paper presents a literature review of existing technologies available to optimize the energy performance of diesel engines and diesel generators in order to reduce the cost of electricity, to increase the diesel engine efficiency and to decrease their fuel consumption and greenhouse gases (GHG) emissions. The proposed optimization methodologies are based on the application of Pre-treatment, Internal treatment and Post-treatment technologies for diesel engines and on the application of mechanical and electrical technologies for diesel power generators (DPGs). The list of references given at the end of the paper should offer aids for students and researchers working in this field.展开更多
Spinal cord injury（SCI）frequently results in the permanent loss of function below the level of injury due to the failure of axonal regeneration in the adult mammalian central nervous system（CNS）.The limited intrin...Spinal cord injury（SCI）frequently results in the permanent loss of function below the level of injury due to the failure of axonal regeneration in the adult mammalian central nervous system（CNS）.The limited intrinsic growth capacity of adult neurons,a lack of growth-promoting factors and the multifactorial inhibitory microenvironment around the lesion site contribute to the lack of axonalregeneration. Strategies such as transplantation of cells,展开更多
The compression stroke characteristics of free-piston engine generator were studied. The numerical model of the compression stroke was established based on thermodynamics and dynamics equation,and the leak loss,heat l...The compression stroke characteristics of free-piston engine generator were studied. The numerical model of the compression stroke was established based on thermodynamics and dynamics equation,and the leak loss,heat loss and friction loss were considered. Through solving numerical equations,the in-cylinder pressure of compression stroke under different compression ratios was calculated,energy transfer and conversion process was analyzed,and the calculated results were experimentally verified. The results showed that the actual effective output of electronic energy and the compression energy stored in the com-pressed gas accounted for about 70%. The compression energy gradually increased with the increasing com-pression ratio. When the compression ratio was more than 7. 5,the actual compression energy increased slowly and the energy error between simulation and test decreased.展开更多
From electric circuit theory view, a system model of series hybrid electric vehicle was built which uses engine-generator and battery pack as its on-board energy source in this paper. Based on the analysis for the con...From electric circuit theory view, a system model of series hybrid electric vehicle was built which uses engine-generator and battery pack as its on-board energy source in this paper. Based on the analysis for the constant power work mode and constant bus voltage work mode of engine-generator, a third work mode was put forward which combined the advantages of constant power and constant bus voltage work modes. The new work mode is reasonable to keep the battery in good working conditions and to extend its life. Also the working conditions of engine can be bettered to get low pollution and high efficiency.展开更多
As an energy generating equipment, the engine-generator set supplies power to the electric transmission. Therefore, its control is one of the key technologies of electric vehicles. Based on the discussion about the de...As an energy generating equipment, the engine-generator set supplies power to the electric transmission. Therefore, its control is one of the key technologies of electric vehicles. Based on the discussion about the demands to the engine-generator set in tracked vehicles, the detailed function of engine-generator and the control strategy are determined. The hardware and software of the control system are also developed and tested in a prototype vehicle. The experiment results show that the control system has good reliability and can satisfy the power requirements of vehicles under all operating conditions.展开更多
Application of a DFIG （doubly-fed induction generator）, which is one of adjustable speed generators, to a gas engine cogeneration system has been investigated. To operate during a blackout as an emergency power supp...Application of a DFIG （doubly-fed induction generator）, which is one of adjustable speed generators, to a gas engine cogeneration system has been investigated. To operate during a blackout as an emergency power supply is one of important roles for the gas engine eogeneration system. In the case of conventional constant speed of synchronous generator, the amount of the allowed step load is limited to around 30% of the rated power. On the other hand, DFIG is expected to increase the amount of step load during the stand-alone operation. In this paper, it has been demonstrated that an increase in the gas engine speed resulted in an increase in the maximum amount of step load using experimental equipment with a real gas engine. It has been concluded that the proposed system can improve the performance of an emergency power supply at step-loading.展开更多
The equivalent linearization method approximates the maximum displacement response of nonlinear structures through the corresponding equivalent linear system. By using the particle swarm optimization technique, a new ...The equivalent linearization method approximates the maximum displacement response of nonlinear structures through the corresponding equivalent linear system. By using the particle swarm optimization technique, a new statistical approach is developed to determine the key parameters of such an equivalent linear system over a 2D space of period and damping ratio. The new optimization criterion realizes the consideration of the structural safety margin in the equivalent linearization method when applied to the performance-based seismic design/evaluation of engineering structures. As an application, equations for equivalent system parameters of both bilinear hysteretic and stiffness degrading single-degree-of- freedom systems are deduced with the assumption of a constant ductility ratio. Error analyses are also performed to validate the proposed approach.展开更多
The attempt to obtain long-term observed data around some sea areas we concern is usually very hard or even impossible in practical offshore and ocean engineering situations. In this paper, by means of linear mean-squ...The attempt to obtain long-term observed data around some sea areas we concern is usually very hard or even impossible in practical offshore and ocean engineering situations. In this paper, by means of linear mean-square estimation method, a new way to extend short-term data to long-term ones is developed. The long-term data about concerning sea areas can be constructed via a series of long-term data obtained from neighbor oceanographic stations, through relevance analysis of different data series. It is effective to cover the insufficiency of time series prediction method＇s overdependence upon the length of data series, as well as the limitation of variable numbers adopted in multiple linear regression model. The storm surge data collected from three oceanographic stations located in Shandong Peninsula are taken as examples to analyze the number-selection effect of reference oceanographic stations（adjacent to the concerning sea area） and the correlation coefficients between sea sites which are selected for reference and for engineering projects construction respectively. By comparing the N-year return-period values which are calculated from observed raw data and processed data which are extended from finite data series by means of the linear mean-square estimation method, one can draw a conclusion that this method can give considerably good estimation in practical ocean engineering, in spite of different extreme value distributions about raw and processed data.展开更多
In this paper, the design, construction and ocean testing of a wave energy conversion system are studied. Based on the motion characteristics of double buoys in ocean waves, a wave energy conversion system with perman...In this paper, the design, construction and ocean testing of a wave energy conversion system are studied. Based on the motion characteristics of double buoys in ocean waves, a wave energy conversion system with permanent magnet tubular linear generator （PMTLG） is proposed to convert ocean wave energy into electricity. The wave energy conversion system was installed in the Yellow Sea near Lianyungang, China. The ocean test re- suits indicate that it had dynamic and static performance, and obtained an expected amount of electricity. The calcu- lation result indicates the average output power was about 1 000 W, and the conversion efficiency from wave en- ergy into electricity was 1.4%. In addition, the wireless data communication, mechanics and oceanography were also discussed.展开更多
Aimed at the problem of instability in engine control caused by vector deflection in experiment of turbofan engines with Axisymmetric Vectoring Exhaust Nozzle(AVEN),a vector deflection stability control method of aero...Aimed at the problem of instability in engine control caused by vector deflection in experiment of turbofan engines with Axisymmetric Vectoring Exhaust Nozzle(AVEN),a vector deflection stability control method of aero-engine based on Linear Active Disturbance Rejection Control(LADRC)is proposed.Firstly,based on CFD numerical simulation,aerodynamic performance model of AVEN is established,and the aerodynamic load change rule of the nozzle throat area actuator during vector deflection is revealed.Subsequently,the integrated model of AVEN/-turbofan engine is established by Simulink/AMESim co-simulation.Finally,the nozzle throat area control loop based on LADRC is designed.The simulation results show that the integrated model can reflect the influence of vector deflection on the stability of the control system.The accuracy comparison between the fan rotor speed and the test data during vector deflection is larger than 1%,indicating a high degree of confidence.Compared with the conventional PID control,the designed LADRC control loop reduces the speed of the low-pressure rotor during vector deflection by 70%,which effectively improves the control stability of the vector deflection.Meanwhile,the fuel flow ratechange during the vector deflection process is smaller and more economical,which provides an important reference for engineering applications.展开更多
A sufficient sample size of monitoring data becomes a key factor for describing aircraft engines state.Generative adversarial nets(GAN)can be used to expand the sample size based on the existing state monitoring infor...A sufficient sample size of monitoring data becomes a key factor for describing aircraft engines state.Generative adversarial nets(GAN)can be used to expand the sample size based on the existing state monitoring information.In the paper,a GAN model is introduced to design an algorithm for generating the monitoring data of aircraft engines.This feasibility of the method is illustrated by an example.The experimental results demonstrate that the probability density distribution of generated data after a large number of network training iterations is consistent with the probability density distribution of monitoring data.The proposed method also effectively demonstrates the generated monitoring data of aircraft engine are in a reasonable range.The method can effectively solve the problem of inaccurate performance degradation evaluation caused by the small amount of aero?engine condition monitoring data.展开更多
Many simple nonlinear main journal bearing models have been studied theoretically, but the connection to existing engineering system has not been equally investigated. The consideration of the characteristics of engin...Many simple nonlinear main journal bearing models have been studied theoretically, but the connection to existing engineering system has not been equally investigated. The consideration of the characteristics of engine main journal bearings may provide a prediction of the bearing load and lubrication. Due to the strong non-linear features in bearing lubrication procedure, it is difficult to predict those characteristics. A non-linear dynamic model is described for analyzing the characteristics of engine main journal bearings. Components such as crankshaft, main journals and con rods are found by applying the finite element method. Non-linear spring/dampers are introduced to imitate the constraint and supporting functions provided by the main bearing and oil film. The engine gas pressure is imposed as excitation on the model via the engine piston, con rod, etc. The bearing reaction force is calculated over one engine cycle, and meanwhile, the oil film thickness and pressure distribution are obtained based on Reynolds differential equation. It can be found that the maximum bearing reaction force always occurs when the maximum cylinder pressure arises in the cylinder adjacent to that bearing. The simulated minimum oil film thickness, which is 3 μm, demonstrates the reliability of the main journal bearings. This non-linear dynamic analysis may save computing efforts of engine main bearing design and also is of good precision and close connection to actual engine main journal bearing conditions.展开更多
In order to clarify the mechanism and main influencing factors of the vibration energy coupling transmission with a dual-piston structure,a thermodynamic and dynamic coupling model of the free piston linear generator(...In order to clarify the mechanism and main influencing factors of the vibration energy coupling transmission with a dual-piston structure,a thermodynamic and dynamic coupling model of the free piston linear generator(FPLG)was established.The system energy conversion,vibration energy coupling transmission,and influencing factors were studied in detail.The coupling transmission paths and the secondary influence mechanism from in-cylinder combustion on vibration energy transmission were obtained.In addition,the influence of the movement characteristics of the dual-piston on the vibration energy transmission was studied,and the typical parameter variation law was obtained,which provides theoretical guidance for the subsequent vibration reduction design of the FPLG.展开更多
基金supported by the Shanghai Municipal Education Research Project“Exploring the Practical Application of Generative Artificial Intelligence in Cultivating Innovative Thinking and Capabilities of Interdisciplinary Application Technology Talents‘Practice Path’”(C2025299)the university-level postgraduate course project“Software Process Management”(PX-2025251502)of Shanghai Sanda Universitythe key course project at the university level of Shanghai Sanda University,“Introduction to Software Engineering”(PX-5241216).
文摘With the advent of the AI era,how can students effectively utilize generative AI large models to assist in course learning?At the same time,how can teachers utilize generative AI tools and the teaching concept of OBE to stimulate students’innovative consciousness and teamwork ability,enabling students to identify some problems in a certain industry or field and creatively propose feasible solutions,and truly achieve the cultivation of new models in software engineering course teaching with the assistance of generative AI tools?This paper presents research and practice on a new model for cultivating software engineering courses that integrates generative AI and OBE,introduces the specific process of teaching reform and practice,and finally explains the achievements of teaching reform.
基金Supported by National Natural Science Foundation of China(Grant No.50877013)
文摘Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A novel type of cylindrical,non-overlapping,transverse-flux,and permanent-magnet linear motor（TFPLM） is investigated,furthermore,a high power factor and less process complexity structure research is developed.The impact of magnetic leakage factor on power factor is discussed,by using the Finite Element Analysis（FEA） model of stirling engine and TFPLM,an optimization method for electro-magnetic design of TFPLM is proposed based on magnetic leakage factor.The relation between power factor and structure parameter is investigated,and a structure parameter optimization method is proposed taking power factor maximum as a goal.At last,the test bench is founded,starting experimental and generating experimental are performed,and a good agreement of simulation and experimental is achieved.The power factor is improved and the process complexity is decreased.This research provides the instruction to design high-power factor permanent-magnet linear generator.
文摘A numerical program is built to simulate the performance of a spark ignited two-stroke free-piston engine coupled with a linear generator. The computational model combines a series of dynamic and thermodynamic equations that are solved simultaneously to predict the performances of the engines. The dynamic analysis performed consists of an evaluation of the frictional force and load force introduced by the generator. The thermodynamic analysis used a single zone model to describe the engine＇ s working cycle which includes intake, scavenging, compression, combustion and expansion, and to evaluate the effect of heat transfer based on the first law of thermodynamics and the ideal gas state equation. Because there is no crankshaft, a time based Wiebe equation was used to express the fraction of fuel burned in the combustion. The calculated results were validated by using the experimental data from another research group. The results indicate that the free-piston generator has some advantages over conventional engines.
基金supported by the Beijing Aeronautical Technology Research Center
文摘In order to explore the total-pressure distortion test assessment method for a turbofan engine, a Controlled Variable Double-Baffle Distortion Generator(CVDBDG) with a horizontal symmetry moving form was developed, which can adjust the steady-state and time–variant distortion separately in real time. The inlet total-pressure distortion test was conducted on an afterburner turbofan engine. The distortion parameters of CVDBDG and the instability characteristics of the engine were measured. The experimental data were modeled and analyzed by using back propagation artificial neural networks, and the work envelope of CVDBDG was obtained. Based on the analysis of the data on the engine’s instability, the properties of CVDBDG used for the stability assessment were preliminarily evaluated. The results show that CVDBDG can simulate both steady-state and time–variant distortions simultaneously in a range determined by three envelopes.Under the condition of symmetric double baffles, a critical depth of insertion exists, beyond which the symmetric baffles will generate an asymmetric flow field. In the case of double baffles, compared to a single baffle, the engine exhibited different instability characteristics. Based on CVDBDG, it is expected that more efficient engine stability and durability assessment methods can be developed.
文摘The rotor initial unbalance of an aeroengine gas generator of turboshaft engine seriously affects rotor assembly process.To reasonably optimize rotor assembly process,the effect analyses of rotor initial unbalance of single disc and combined discs on rotor dynamic characteristics are firstly implemented in respect of the dispersity of rotor initial unbalance.It is found that the most important factors contributing to rotor vibration are the unbalances of the first stage compressor disc and the second stage turbine disc.However,reducing the mass of two discs conflicts with the control of the whole gas generator rotor balance resulting from the unbalance increase of single components.Thus,we further analyze the key control factors of affecting rotor initial unbalance,and give the strict control measures of centrifugal impeller runout in the assembly process by adjusting the angle of central tie rod axis.The purpose of this measures to make the assembly process simpler and more effective for timely controlling rotor initial unbalance.The efforts of this study validate that the proposed method is workable for the rotor tightened by a central tie rod and possesses the significant meaning of practical application in engineering.
基金Projects(51675043,52005038)supported by the National Natural Science Foundation of China。
文摘The free-piston engine generator(FPEG)is regarded as the next generation of energy conversion system which may replace traditional engines in the future.The effect of key operational parameters like excess air ratio of input mixture and ignition position on the engine performance of a dual-cylinder FPEG was investigated,and their sensitivity was analyzed in this paper.The operating compression ratio of the system is susceptible to changes in excess air ratio and ignition position.At the same time,it decreases from 15.8 to 6.6 when excess air ratio increases from 0.85 to 1.15,but it increases from 6.1 to 13.3 as ignition position increases from 15 mm to 20 mm.The operating frequency and indicated power are more sensitive to changes in excess air ratio than ignition position.But it is the opposite for the indicated thermal efficiency and friction loss.Excess air ratio and ignition position have a quite similar influence on heat transfer.Therefore,from the perspective of system operation and performance,it is preferable to keep excess air coefficient slightly below 1.0.In contrast,when selecting ignition position,it is of great importance to comprehensively consider the risk of structural damage caused by the increase in the compression ratio and in-cylinder gas pressure.
文摘The electrical instability that frequently distinguishes the isolated networks and depends on diesel generators to supply their energy requirements leads to an operation of the diesel generator in a transient dynamic condition and/or at low loads. In addition, extended operation of the diesel generator at partial load develops the condensation of combustion residues on the engine cylinder walls, which, after a certain time, increases friction, reduces the efficiency of the equipment and increases its fuel consumption. On the other hand, recent regulatory changes have led to ever more stringent and evolving emission standards. Among these, the International Maritime Organization (IMO) and the Environmental Protection Agency (EPA) have implemented emission standards in order to reduce exhaust gas emitted by marine diesel engines. To phase lower emission engines as soon as possible, a Tier system was adopted. This paper presents a literature review of existing technologies available to optimize the energy performance of diesel engines and diesel generators in order to reduce the cost of electricity, to increase the diesel engine efficiency and to decrease their fuel consumption and greenhouse gases (GHG) emissions. The proposed optimization methodologies are based on the application of Pre-treatment, Internal treatment and Post-treatment technologies for diesel engines and on the application of mechanical and electrical technologies for diesel power generators (DPGs). The list of references given at the end of the paper should offer aids for students and researchers working in this field.
基金Supported by grants from the Deutsche Forschungsgemeinschaft(BL414/3-1)International Foundation for Research in Paraplegia+2 种基金the Indiana University Health-Indiana University School of Medicine Strategic Research InitiativeIndiana Spinal Cord and Brain Injury Research FundMorton Cure Paralysis Fund to AB and a Heinz Gotze Memorial Fellowship to SL
文摘Spinal cord injury（SCI）frequently results in the permanent loss of function below the level of injury due to the failure of axonal regeneration in the adult mammalian central nervous system（CNS）.The limited intrinsic growth capacity of adult neurons,a lack of growth-promoting factors and the multifactorial inhibitory microenvironment around the lesion site contribute to the lack of axonalregeneration. Strategies such as transplantation of cells,
基金Supported by the National Natural Science Foundation of China(51006010)the Program of Introducing Talents of Discipline to Universities(B12022)
文摘The compression stroke characteristics of free-piston engine generator were studied. The numerical model of the compression stroke was established based on thermodynamics and dynamics equation,and the leak loss,heat loss and friction loss were considered. Through solving numerical equations,the in-cylinder pressure of compression stroke under different compression ratios was calculated,energy transfer and conversion process was analyzed,and the calculated results were experimentally verified. The results showed that the actual effective output of electronic energy and the compression energy stored in the com-pressed gas accounted for about 70%. The compression energy gradually increased with the increasing com-pression ratio. When the compression ratio was more than 7. 5,the actual compression energy increased slowly and the energy error between simulation and test decreased.
文摘From electric circuit theory view, a system model of series hybrid electric vehicle was built which uses engine-generator and battery pack as its on-board energy source in this paper. Based on the analysis for the constant power work mode and constant bus voltage work mode of engine-generator, a third work mode was put forward which combined the advantages of constant power and constant bus voltage work modes. The new work mode is reasonable to keep the battery in good working conditions and to extend its life. Also the working conditions of engine can be bettered to get low pollution and high efficiency.
文摘As an energy generating equipment, the engine-generator set supplies power to the electric transmission. Therefore, its control is one of the key technologies of electric vehicles. Based on the discussion about the demands to the engine-generator set in tracked vehicles, the detailed function of engine-generator and the control strategy are determined. The hardware and software of the control system are also developed and tested in a prototype vehicle. The experiment results show that the control system has good reliability and can satisfy the power requirements of vehicles under all operating conditions.
文摘Application of a DFIG （doubly-fed induction generator）, which is one of adjustable speed generators, to a gas engine cogeneration system has been investigated. To operate during a blackout as an emergency power supply is one of important roles for the gas engine eogeneration system. In the case of conventional constant speed of synchronous generator, the amount of the allowed step load is limited to around 30% of the rated power. On the other hand, DFIG is expected to increase the amount of step load during the stand-alone operation. In this paper, it has been demonstrated that an increase in the gas engine speed resulted in an increase in the maximum amount of step load using experimental equipment with a real gas engine. It has been concluded that the proposed system can improve the performance of an emergency power supply at step-loading.
文摘The equivalent linearization method approximates the maximum displacement response of nonlinear structures through the corresponding equivalent linear system. By using the particle swarm optimization technique, a new statistical approach is developed to determine the key parameters of such an equivalent linear system over a 2D space of period and damping ratio. The new optimization criterion realizes the consideration of the structural safety margin in the equivalent linearization method when applied to the performance-based seismic design/evaluation of engineering structures. As an application, equations for equivalent system parameters of both bilinear hysteretic and stiffness degrading single-degree-of- freedom systems are deduced with the assumption of a constant ductility ratio. Error analyses are also performed to validate the proposed approach.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51379195 and 41476078)the Natural Science Foundation of Shandong Province(Grant No.ZR2013EEM034)+2 种基金the Scientific Research Foundation of Science Technology Department of Zhejiang Province(Grant No.2015C34013)the Science Research Program of Zhoushan(Grant No.2014C41003)the Innovation Fund for Graduate Student of Shandong Province(Grant No.SDYY12152)
文摘The attempt to obtain long-term observed data around some sea areas we concern is usually very hard or even impossible in practical offshore and ocean engineering situations. In this paper, by means of linear mean-square estimation method, a new way to extend short-term data to long-term ones is developed. The long-term data about concerning sea areas can be constructed via a series of long-term data obtained from neighbor oceanographic stations, through relevance analysis of different data series. It is effective to cover the insufficiency of time series prediction method＇s overdependence upon the length of data series, as well as the limitation of variable numbers adopted in multiple linear regression model. The storm surge data collected from three oceanographic stations located in Shandong Peninsula are taken as examples to analyze the number-selection effect of reference oceanographic stations（adjacent to the concerning sea area） and the correlation coefficients between sea sites which are selected for reference and for engineering projects construction respectively. By comparing the N-year return-period values which are calculated from observed raw data and processed data which are extended from finite data series by means of the linear mean-square estimation method, one can draw a conclusion that this method can give considerably good estimation in practical ocean engineering, in spite of different extreme value distributions about raw and processed data.
基金Supported by the National Natural Science Foundation of China(No.41076054)Special Foundation for State Oceanic Administration of China(No.GHME2011GD02)Scientific Research Foundation of Graduate School of Southeast University(No.YBJJ1416)
文摘In this paper, the design, construction and ocean testing of a wave energy conversion system are studied. Based on the motion characteristics of double buoys in ocean waves, a wave energy conversion system with permanent magnet tubular linear generator （PMTLG） is proposed to convert ocean wave energy into electricity. The wave energy conversion system was installed in the Yellow Sea near Lianyungang, China. The ocean test re- suits indicate that it had dynamic and static performance, and obtained an expected amount of electricity. The calcu- lation result indicates the average output power was about 1 000 W, and the conversion efficiency from wave en- ergy into electricity was 1.4%. In addition, the wireless data communication, mechanics and oceanography were also discussed.
基金supported in part by the National Science and Technology Major Project,China(No.2017-V-0004-0054)in part by the Research on the Basic Problem of Intelligent Aeroengine,China(No.2017-JCJQ-ZD-047-21)+1 种基金in part by the Fundamental Research Funds for the Central Universities,China(No.NZ2020002)in part by the National Natural Science Foundation of China(No.51906102)。
文摘Aimed at the problem of instability in engine control caused by vector deflection in experiment of turbofan engines with Axisymmetric Vectoring Exhaust Nozzle(AVEN),a vector deflection stability control method of aero-engine based on Linear Active Disturbance Rejection Control(LADRC)is proposed.Firstly,based on CFD numerical simulation,aerodynamic performance model of AVEN is established,and the aerodynamic load change rule of the nozzle throat area actuator during vector deflection is revealed.Subsequently,the integrated model of AVEN/-turbofan engine is established by Simulink/AMESim co-simulation.Finally,the nozzle throat area control loop based on LADRC is designed.The simulation results show that the integrated model can reflect the influence of vector deflection on the stability of the control system.The accuracy comparison between the fan rotor speed and the test data during vector deflection is larger than 1%,indicating a high degree of confidence.Compared with the conventional PID control,the designed LADRC control loop reduces the speed of the low-pressure rotor during vector deflection by 70%,which effectively improves the control stability of the vector deflection.Meanwhile,the fuel flow ratechange during the vector deflection process is smaller and more economical,which provides an important reference for engineering applications.
基金supported by the National Science Foundation for Young Scientists of China (No. 71401073)
文摘A sufficient sample size of monitoring data becomes a key factor for describing aircraft engines state.Generative adversarial nets(GAN)can be used to expand the sample size based on the existing state monitoring information.In the paper,a GAN model is introduced to design an algorithm for generating the monitoring data of aircraft engines.This feasibility of the method is illustrated by an example.The experimental results demonstrate that the probability density distribution of generated data after a large number of network training iterations is consistent with the probability density distribution of monitoring data.The proposed method also effectively demonstrates the generated monitoring data of aircraft engine are in a reasonable range.The method can effectively solve the problem of inaccurate performance degradation evaluation caused by the small amount of aero?engine condition monitoring data.
基金supported by National Natural Science Foundation of China (Grant No. 60879002)National Hi-tech Research and Development Program of China (863 Program, Grant No. 2006AA110112)
文摘Many simple nonlinear main journal bearing models have been studied theoretically, but the connection to existing engineering system has not been equally investigated. The consideration of the characteristics of engine main journal bearings may provide a prediction of the bearing load and lubrication. Due to the strong non-linear features in bearing lubrication procedure, it is difficult to predict those characteristics. A non-linear dynamic model is described for analyzing the characteristics of engine main journal bearings. Components such as crankshaft, main journals and con rods are found by applying the finite element method. Non-linear spring/dampers are introduced to imitate the constraint and supporting functions provided by the main bearing and oil film. The engine gas pressure is imposed as excitation on the model via the engine piston, con rod, etc. The bearing reaction force is calculated over one engine cycle, and meanwhile, the oil film thickness and pressure distribution are obtained based on Reynolds differential equation. It can be found that the maximum bearing reaction force always occurs when the maximum cylinder pressure arises in the cylinder adjacent to that bearing. The simulated minimum oil film thickness, which is 3 μm, demonstrates the reliability of the main journal bearings. This non-linear dynamic analysis may save computing efforts of engine main bearing design and also is of good precision and close connection to actual engine main journal bearing conditions.
文摘In order to clarify the mechanism and main influencing factors of the vibration energy coupling transmission with a dual-piston structure,a thermodynamic and dynamic coupling model of the free piston linear generator(FPLG)was established.The system energy conversion,vibration energy coupling transmission,and influencing factors were studied in detail.The coupling transmission paths and the secondary influence mechanism from in-cylinder combustion on vibration energy transmission were obtained.In addition,the influence of the movement characteristics of the dual-piston on the vibration energy transmission was studied,and the typical parameter variation law was obtained,which provides theoretical guidance for the subsequent vibration reduction design of the FPLG.
