Accurately predicting the powder factor during blasting is essential for sustainable production planning in low-grade mines.This research presents a method for predicting powder factor based on the heterogeneity of ro...Accurately predicting the powder factor during blasting is essential for sustainable production planning in low-grade mines.This research presents a method for predicting powder factor based on the heterogeneity of rock mass rating(RMR).Considering a low-grade metal mine as an example,this study exploited geostatistical methods to obtain independent RMR for each block unit.A three-dimensional spatial distribution model for the powder factor was developed on the basis of the relationships between the RMR and the powder factor.Subsequently,models for blasting cost and mining value were built and employed to optimize the open-pit limit.The multi-variable model based on the RMR performed well in predicting the powder factor,achieving a correlation coefficient of 0.88(root mean square error of 4.3)and considerably outperforming the uniaxial compressive strength model.After model optimization,the mean size and standard deviation of the fragments in the blast pile decreased by 8.5%and 35.1%,respectively,whereas the boulder yield and its standard deviation decreased by 33.3%and 58.8%,respectively.Additionally,optimizing the open-pit limit using this method reduced the amount of rock,increased the amount of ore,and lowered blasting costs,thereby enhancing the economic efficiency of the mine.This study provides valuable insights for blasting design and mining decisions,demonstrating the advantages and potential applications of powder factor prediction based on the heterogeneity of rock mass quality.展开更多
Based on the zero-failure data of 30 Chinese 1. 5 MW wind turbine gearboxes( WTGs),the optimal confidence limit method was developed to predict the reliability and reliability lifetime of WTG. Firstly,Bayesian method ...Based on the zero-failure data of 30 Chinese 1. 5 MW wind turbine gearboxes( WTGs),the optimal confidence limit method was developed to predict the reliability and reliability lifetime of WTG. Firstly,Bayesian method and classical probability estimation method were introduced to estimate the value interval of shape parameter considering the engineering practice. Secondly,taking this value interval into the optimal confidence limit method,the reliability and reliability lifetime of WTG could be obtained under different confidence levels. Finally,the results of optimal confidence limit method and Bayesian method were compared. And the comparison results show that the rationality of this estimated range.Meantime, the rule of confidence level selection in the optimal confidence limit method is provided, and the reliability and reliability lifetime prediction of WTG can be acquired.展开更多
Subpixel localization techniques for estimating the positions of point-like images captured by pixelated image sensors have been widely used in diverse optical measurement fields.With unavoidable imaging noise,there i...Subpixel localization techniques for estimating the positions of point-like images captured by pixelated image sensors have been widely used in diverse optical measurement fields.With unavoidable imaging noise,there is a precision limit(PL)when estimating the target positions on image sensors,which depends on the detected photon count,noise,point spread function(PSF)radius,and PSF’s intra-pixel position.Previous studies have clearly reported the effects of the first three parameters on the PL but have neglected the intra-pixel position information.Here,we develop a localization PL analysis framework for revealing the effect of the intra-pixel position of small PSFs.To accurately estimate the PL in practical applications,we provide effective PSF(e PSF)modeling approaches and apply the Cramér–Rao lower bound.Based on the characteristics of small PSFs,we first derive simplified equations for finding the best PL and the best intra-pixel region for an arbitrary small PSF;we then verify these equations on real PSFs.Next,we use the typical Gaussian PSF to perform a further analysis and find that the final optimum of the PL is achieved at the pixel boundaries when the Gaussian radius is as small as possible,indicating that the optimum is ultimately limited by light diffraction.Finally,we apply the maximum likelihood method.Its combination with e PSF modeling allows us to successfully reach the PL in experiments,making the above theoretical analysis effective.This work provides a new perspective on combining image sensor position control with PSF engineering to make full use of information theory,thereby paving the way for thoroughly understanding and achieving the final optimum of the PL in optical localization.展开更多
Selecting a cost optimum subset of discrete-value dispersion compensation modules (DV-DCMs) subject to maximum module count from an available set of DV-DCMs is a NP-hard problem. We derive a novel dynamic programming ...Selecting a cost optimum subset of discrete-value dispersion compensation modules (DV-DCMs) subject to maximum module count from an available set of DV-DCMs is a NP-hard problem. We derive a novel dynamic programming algorithm with pseudo-polynomial time bound and show that DV-DCM cost re-scaling can improve the running time.展开更多
基金supported by the National Key Research and Development Program of China(No.2022YFC2903902)the National Natural Science Foundation of China(Nos.52204080and 52174070)the Fundamental Research Funds for the Central Universities of China(No.2023GFYD17)。
文摘Accurately predicting the powder factor during blasting is essential for sustainable production planning in low-grade mines.This research presents a method for predicting powder factor based on the heterogeneity of rock mass rating(RMR).Considering a low-grade metal mine as an example,this study exploited geostatistical methods to obtain independent RMR for each block unit.A three-dimensional spatial distribution model for the powder factor was developed on the basis of the relationships between the RMR and the powder factor.Subsequently,models for blasting cost and mining value were built and employed to optimize the open-pit limit.The multi-variable model based on the RMR performed well in predicting the powder factor,achieving a correlation coefficient of 0.88(root mean square error of 4.3)and considerably outperforming the uniaxial compressive strength model.After model optimization,the mean size and standard deviation of the fragments in the blast pile decreased by 8.5%and 35.1%,respectively,whereas the boulder yield and its standard deviation decreased by 33.3%and 58.8%,respectively.Additionally,optimizing the open-pit limit using this method reduced the amount of rock,increased the amount of ore,and lowered blasting costs,thereby enhancing the economic efficiency of the mine.This study provides valuable insights for blasting design and mining decisions,demonstrating the advantages and potential applications of powder factor prediction based on the heterogeneity of rock mass quality.
基金National Natural Science Foundation of China(No.51265025)
文摘Based on the zero-failure data of 30 Chinese 1. 5 MW wind turbine gearboxes( WTGs),the optimal confidence limit method was developed to predict the reliability and reliability lifetime of WTG. Firstly,Bayesian method and classical probability estimation method were introduced to estimate the value interval of shape parameter considering the engineering practice. Secondly,taking this value interval into the optimal confidence limit method,the reliability and reliability lifetime of WTG could be obtained under different confidence levels. Finally,the results of optimal confidence limit method and Bayesian method were compared. And the comparison results show that the rationality of this estimated range.Meantime, the rule of confidence level selection in the optimal confidence limit method is provided, and the reliability and reliability lifetime prediction of WTG can be acquired.
基金the support from the National Natural Science Foundation of China(51827806)the National Key Research and Development Program of China(2016YFB0501201)the Xplorer Prize funded by the Tencent Foundation。
文摘Subpixel localization techniques for estimating the positions of point-like images captured by pixelated image sensors have been widely used in diverse optical measurement fields.With unavoidable imaging noise,there is a precision limit(PL)when estimating the target positions on image sensors,which depends on the detected photon count,noise,point spread function(PSF)radius,and PSF’s intra-pixel position.Previous studies have clearly reported the effects of the first three parameters on the PL but have neglected the intra-pixel position information.Here,we develop a localization PL analysis framework for revealing the effect of the intra-pixel position of small PSFs.To accurately estimate the PL in practical applications,we provide effective PSF(e PSF)modeling approaches and apply the Cramér–Rao lower bound.Based on the characteristics of small PSFs,we first derive simplified equations for finding the best PL and the best intra-pixel region for an arbitrary small PSF;we then verify these equations on real PSFs.Next,we use the typical Gaussian PSF to perform a further analysis and find that the final optimum of the PL is achieved at the pixel boundaries when the Gaussian radius is as small as possible,indicating that the optimum is ultimately limited by light diffraction.Finally,we apply the maximum likelihood method.Its combination with e PSF modeling allows us to successfully reach the PL in experiments,making the above theoretical analysis effective.This work provides a new perspective on combining image sensor position control with PSF engineering to make full use of information theory,thereby paving the way for thoroughly understanding and achieving the final optimum of the PL in optical localization.
文摘Selecting a cost optimum subset of discrete-value dispersion compensation modules (DV-DCMs) subject to maximum module count from an available set of DV-DCMs is a NP-hard problem. We derive a novel dynamic programming algorithm with pseudo-polynomial time bound and show that DV-DCM cost re-scaling can improve the running time.
