The visual noise of each light intensity area is different when the image is drawn by Monte Carlo method.However,the existing denoising algorithms have limited denoising performance under complex lighting conditions a...The visual noise of each light intensity area is different when the image is drawn by Monte Carlo method.However,the existing denoising algorithms have limited denoising performance under complex lighting conditions and are easy to lose detailed information.So we propose a rendered image denoising method with filtering guided by lighting information.First,we design an image segmentation algorithm based on lighting information to segment the image into different illumination areas.Then,we establish the parameter prediction model guided by lighting information for filtering(PGLF)to predict the filtering parameters of different illumination areas.For different illumination areas,we use these filtering parameters to construct area filters,and the filters are guided by the lighting information to perform sub-area filtering.Finally,the filtering results are fused with auxiliary features to output denoised images for improving the overall denoising effect of the image.Under the physically based rendering tool(PBRT)scene and Tungsten dataset,the experimental results show that compared with other guided filtering denoising methods,our method improves the peak signal-to-noise ratio(PSNR)metrics by 4.2164 dB on average and the structural similarity index(SSIM)metrics by 7.8%on average.This shows that our method can better reduce the noise in complex lighting scenesand improvethe imagequality.展开更多
In the tropical regions represented by Hainan,there are abundant solar and thermal resources,and it is relatively suitable for the construction of photovoltaic greenhouse(PVG).However,the construction of PVG still rel...In the tropical regions represented by Hainan,there are abundant solar and thermal resources,and it is relatively suitable for the construction of photovoltaic greenhouse(PVG).However,the construction of PVG still relies mainly on experience and is incapable of quantifying the balance between the photovoltaic(PV)generation and the light requirements for agricultural production.As a result,actual PVGs are primarily PV-based,without carefully considering the needs of agricultural daylighting.To quantify the influence of the design parameters of PVGs and the layout of PV panels on the internal daylighting of serrated PVGs,and to optimize the daylighting design of the roof,this paper utilizes the Design Builder software to establish gradient models for a multi-span serrated-type PVG in tropical regions.Gradient models were established in terms of aspects,namely span,width of longitudinal/transverse daylighting strip,height,roof angle,and photovoltaic panel coverage rate(PCR).Daylighting in the greenhouse of each gradient model was simulated,and with the annual average daily light integral(A_(DLI))and distribution uniformity(DU)as evaluation indicators,the influence of various design parameters on the daylighting inside the greenhouse was quantified.The result reveals that:(1)PCR is the decisive indicator for daylighting in the PVG,and a function between PCR and the A_(DLI) is derived as A_(DLI)=-15.5 PCR+16.841;(2)Increasing the width of longitudinal daylighting strip significantly improves the A_(DLI) and enhances DU while increasing the span has a noticeable effect on improving A_(DLI) but does not significantly enhance DU;(3)Increasing the eave height without changing PCR does not enhance A_(DLI) but effectively improves DU;increasing the transverse daylighting strip and adjusting the roof angle hardly improves A_(DLI).In summary,it is recommended that the optimal span for PVGs in tropical regions be set within the range of 6.5-8.0m,and the eave height be set within the range of 2.5-3.5m.Preferably,the longitudinal daylighting strip with a width ranging from 0.5-0.8m should be installed.Based on the above relationship function,the PCR can be calculated according to the appropriate light demand for the cultivated crops.The daylighting design theory proposed in this paper can provide a theoretical basis and reference for the healthy development of the PV industry in tropical regions.展开更多
Supplemental lighting has emerged as a widely adopted technique in greenhouse cultivation to enhance product visibility andimprove theflavor characteristics ofChinese bayberry(Myrica rubra)in the internationalmarket.W...Supplemental lighting has emerged as a widely adopted technique in greenhouse cultivation to enhance product visibility andimprove theflavor characteristics ofChinese bayberry(Myrica rubra)in the internationalmarket.While studies on lighting have predominantly focused on colorimetry,limited research has addressed the precise control of chromatic parameters and their effect on fruit quality.This study examined the effects of varying lighting conditions,specifically correlated color temperatures and illuminance,on the growth and quality of Chinese bayberry varieties“Black Charcoal”and“Dongkui”using a precision control system.The bayberry plants were exposed to a constant illuminance of 155μmol·m^(-2)·s^(-1) with chromatic levels ranging from 2250 to 6000 K.Black Charcoal demonstrated substantial improvements under different chromatic parameters,with fruit weight and size increasing by 40%and 14%,respectively.Furthermore,soluble solids content increased by 4% and vitamin C content rose by 142%,while organic acid content decreased by 30%.Dongkui,however,showed more modest responses under identical conditions,with fruit weight increasing by 2% and fruit size decreasing by 1%.Soluble solids and vitamin C contents showed minimal increases of 2% and 2.5%,respectively,while organic acid content decreased by 8%.The findings demonstrate that supplemental LED lighting significantly enhances both yield and quality parameters in Black Charcoal compared with Dongkui.These results provide valuable insights for optimizing Chinese bayberry cultivation,and the precise control methodology developed can be used to improve supplemental lighting strategies in other fruit and plant species.展开更多
The rapid expansion of urbanization has led to widespread exposure of wild birds to intensive light at night(LAN).While previous studies have established LAN-induced cognitive impairment in birds,the underlying neurob...The rapid expansion of urbanization has led to widespread exposure of wild birds to intensive light at night(LAN).While previous studies have established LAN-induced cognitive impairment in birds,the underlying neurobiological mechanisms remain poorly understood.We hypothesized that LAN exposure impaired cognitive function of birds potentially through neurodegeneration,metabolic dysregulation and neuroinflammatory responses in the telencephalon.Using Zebra Finches(Taeniopygia guttata)as an avian model,under 16L:8D photoperiods,we compared associative learning and memory abilities and neurobiological parameters between experimental groups exposed to dim light at night(LAN)versus nocturnal darkness(CTR).Compared to the CTR birds,the LAN-exposed birds exhibited significantly lower learning and memory performances,reduced neuron density and simplified dendritic morphology in the telencephalons.The key energy metabolic substrates(cholic acid,CTP,D-mannose-6-phosphate)and neuroprotective agents(trehalose,menaquinone,L-gulono-1,4-lactone)in the telencephalons of LAN-exposed birds showed depletion,while oxidative stress markers(methionine sulfoxide)and inflammatory mediators(cis-gondoic acid)exhibited elevation.The neurotransmitter dopamine and histamine metabolic pathway were disrupted in the LAN-exposed birds.The microglias were activated with pro-inflammatory IL-1βand IL-6 levels increasing and anti-inflammatory IL-10 decreasing in the telencephalons of the LAN-exposed birds.These findings indicate a potential mechanistic pathway whereby dim light exposure at night can induce neuroinflammation through oxidative stress-mediated microglial activation,energy metabolism and neurotransmitter homeostasis disruption,ultimately leading to neurodegeneration in the telencephalons of birds.展开更多
Currently,most conventional street lighting systems use a constant light mode throughout the entire night,fromsunset to sunrise,which results in high energy consumption and maintenance costs.Furthermore,scientific res...Currently,most conventional street lighting systems use a constant light mode throughout the entire night,fromsunset to sunrise,which results in high energy consumption and maintenance costs.Furthermore,scientific research predicts that energy consumption for street lighting will increase in the coming years due to growing demand and rising electricity prices.The dimming strategy is a current trend and a key concept in smart street lighting systems.It involves turning on the road lights only when a vehicle or pedestrian is detected;otherwise,the control system reduces the light intensity of the lamps.Power control is generally implemented using artificial intelligence algorithms such as fuzzy logic,artificial neural networks,or swarm intelligence to manage different events.In our project,the dimming strategy was utilized to reduce costs and energy consumption by at least 48%.This research proposes a standalone photovoltaic plant(SPP)to power a smart street lighting system,which can replace individual solar street lights in a small neighborhood in southwestern Algeria.This design offers advantages such as lower costs and the option to add additional loads a DC pump,a domestic power supply,or technical services to operate the photovoltaic system during the day after charging the storage batteries,especially when there is monthly energy surplus.The energy surplus analyzed in our project ranges from 804 W in January to 4 kW in June,generated by the entire PV installation.To demonstrate the feasibility and reliability of this system,we studied the implementation of the standalone photovoltaic plant,energymanagement,and economic analysis using the Particle SwarmOptimization technique under MATLAB software.展开更多
Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty ...Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty to coexisting with other multivalent activated ions(such as Eu^(3+),Tm^(3+)),which greatly hinders the formation of full spectrum.In this study,a calcium vacancy enhanced self-reduction of Ce^(4+)is realized in CaNaSb_(2)O_(6)F(CNSOF)host under air atmosphere sintering,through which Ce^(3+),Tm^(3+)and Eu^(3+)coexisting in a single-phase full spectrum phosphor was prepared.Notably,the artificial introduction of a calcium vacancy was designed to verify this self-reduction mechanism.Moreover,the energy transfer kinetics among Tm^(3+),Ce^(3+)and Eu^(3+)were explored.Finally,combined with a 340 nm UV chip,a full spectrum phosphor-converted light-emitting diode(pc-LED)was fabricated,showing a broad emission range from 400 to 750 nm,Commission Internationale de I'Edairage(CIE)of(0.3485,0.3673),Ra of 92 and correlated color temperature(CCT)of 4933 K.Utilizing the variation in emission colors of this phosphor under different UV wavelengths,a dual encryption method combining point character code and fluorescent encryption technique is proposed.This work provides an effective path for Ce^(4+)self-reduction to apply in full spectrum pc-LED and information encryption.展开更多
All-inorganic reflective phosphor-in-glass film(PiGF) converter has garnered widespread attentions for high brightness laser-driven white lighting,while its poor color quality and low luminescence stability have been ...All-inorganic reflective phosphor-in-glass film(PiGF) converter has garnered widespread attentions for high brightness laser-driven white lighting,while its poor color quality and low luminescence stability have been inevitable roadblocks.Herein,the bicolor PiGF containing green-emitting Y3Al3.08Ga1.92O12:Ce3+(YAGG) and red-emitting CaAlSiN_(3):Eu^(2+)(CASN) phosphors bonded on Al2O3substrate was prepared for enabling high color quality laser-driven white lighting in reflective configuration.The bicolor PiGF has high quantum efficiency and good structure stability.By optimizing the CASN content,PiGF thickness and Al_(2)O_(3) content,the reflective bicolor PiGF based white laser diode(LD)displays good luminescence performance with a luminous flux of 451.5 lm and a luminous efficacy of142.3 lm/W and high color quality with a color rendering index(CRI) of 85.3 and a correlated color temperature(CCT) of 5177 K under the incident laser power of 3.15 W,and still has excellent luminescence and color stabilities(CRI and CCT) under the continuous laser excitation of 5.61 W,attributed to the good thermal conductivity and high reflectivity of Al_(2)O_(3) substrate and scattering enhancement effect of Al_(2)O_(3) particles.It can be foreseen that the reflective bicolor PiGF converter provides a promising strategy for enabling high quality laser-driven white lighting.展开更多
In recent years,the development of solid-state lighting devices has increasingly shifted towards high-power laser illumination,making it imperative to develop fluorescent conversion materials with exceptional thermal ...In recent years,the development of solid-state lighting devices has increasingly shifted towards high-power laser illumination,making it imperative to develop fluorescent conversion materials with exceptional thermal stability and luminous quality.In this study,we introduced a highly reflective TiO_(2) substrate in combination with a high thermal conductivity AlN substrate to design a Ce:YAG-PiG-TiO_(2)-AlN Film(Ce:YAG PTAF)color converter with outstanding photothermal performance.Remarkably,the thermal conductivity of this material reaches 48.28 W m^(-1) K^(-1).Notably,the optimized PTAF can withstand a high-power output of up to 12.14 W in a static environment,with a maximum luminous flux(LFmax)of 2284.6 lm and maximum luminous efficacy(LEmax)of 222.35 lm W^(-1),showcasing its excellent optical properties.Furthermore,the fabricated Ce:YAG-PiG-TiO_(2)-AlN-Wheel(Ce:YAG PTAW),equipped with a motor operating at 7200 r/min,emits an extraordinary brightness of 4404 lm under 88 W of ultra-high laser irradiation,with stability surpassing that of commercial silicone color wheels,thanks to its superior Li_(2)O-Al_(2)O_(3)-SiO_(2)(LAS)glass system.Interestingly,we designed an innovative spatially separated two-color segmented wheel structure,effectively mitigating the photon reabsorption phenomenon caused by the overlap of the fluorescent powder absorption peaks.When the ratio of Ce:YAG to Ce:GdYAG is 240:120,it yields white light with a color rendering index(CRI)of 80.2,and luminous flux remaining at 3317.8 lm.When encapsulated in a reflective module,it accurately reflects the true color states of objects.These results collectively indicate that both Ce:YAG PTAF and PTAW possess significant application potential in the realm of high-power laser illumination.展开更多
China’s economy has developed rapidly since its reform and opening-up.However,the different rates of development in various places due to location and policies have led to significant economic differences.Based on th...China’s economy has developed rapidly since its reform and opening-up.However,the different rates of development in various places due to location and policies have led to significant economic differences.Based on the nighttime lighting data of 281 municipal spatial units in China from 2013 to 2021,this study uses spatial autocorrelation,center of gravity shift,and standard deviation ellipse(SDE)analysis to examine the evolution of the spatial pattern of China’s municipal economy.Based on these,it uses a geographically weighted regression(GWR)model to explore the factors influencing the differences in China’s municipal economy and its spatial heterogeneity.The paper reveals the following results.First,China’s municipal economy as a whole shows a growing trend.Second,the SDE shows a“north-south”distribution pattern,and the concentration of China’s economic development has slightly increased,with a significant centripetal distribution.Third,spatial correlation shows spatial positive correlation,the degree of which is increasing,with strong spatial heterogeneity and regional agglomeration.Finally,measuring the influencing factors according to GWR,the industrial structure and education expenditure coefficients generally show a decreasing trend from the southeast coast to the northwest and inland due to the degree of transformation of industrial structure and the lagging effect of education expenditure on economic growth.Conversely,the innovation driver and urban area coefficients show a decreasing trend from the northwest inland to the southeast coast due to the law of diminishing marginal utility of innovation drivers and differences in urbanization development.Government expenditure coefficients show a higher trend in the East and a lower trend in the West due to policy favoritism and market development level.This research can serve as a theoretical reference for China to achieve high-quality development and move toward common prosperity.展开更多
Solid-state lighting is now developing toward high-power and super-brightness,but is largely limited by the lack of highly robust and efficient color conversion materials that can be survived from high-power or high-p...Solid-state lighting is now developing toward high-power and super-brightness,but is largely limited by the lack of highly robust and efficient color conversion materials that can be survived from high-power or high-power density excitation,typically the red-emitting ones.In this work,we fabricated highly effi-cient and pore-free Sr_(0.5)Ca_(0.5)AlSiN_(3)∶Eu^(2+)(SCASN)red-emitting ceramics by spark plasma sintering of fine phosphor powders.These fine phosphor powders were prepared by treating the commercial phosphors with high-energy ball-milling,centrifugation and acid washing,leading to a particle size of 2.55μm and an internal quantum efficiency as high as 74.0%under 450 nm excitation.The phosphor powders can be densified into SCASN ceramics without using sintering additives at a temperature as low as 1475℃,and the ceramics show an internal quantum efficiency of 75.3%,which is 50%higher than those ceram-ics fabricated with untreated commercial powders.When excited by a high-power blue LED at a current density of 4 A/mm^(2),the SCASN ceramics have a maximum luminous flux of 660 lm(i.e.,26 Mcd/m^(2)).The phosphor ceramics can also withstand a high laser power density of 15.7 W/mm^(2),and exhibit an output luminance of 188 Mcd/m^(2).This work provides a general method to prepare fine phosphor powders that enable to fabricate high efficiency phosphor ceramics used in high-power solid-state lighting.展开更多
The utilization of phosphors that achieve full-spectrum lighting has emerged as a prevailing trend in the advancement of white light-emitting diode(WLED)lighting.In this study,we successfully prepared a novel green ph...The utilization of phosphors that achieve full-spectrum lighting has emerged as a prevailing trend in the advancement of white light-emitting diode(WLED)lighting.In this study,we successfully prepared a novel green phosphor Ba_(2)Sc_(2)((BO_(3))_(2)B_(2)O_(5)):Ce^(3+)(BSBO:Ce^(3+))that can be utilized for full-spectrum lighting and low-temperature sensors.BSBO:Ce^(3+)exhibits a broad-band excitation spectrum centered at 410 nm,and a broad-band emission spectrum centered at 525 nm.The internal and external quantum efficiencies of BSBO:Ce^(3+)are 99%and 49%,respectively.The thermal stability of BSBO:Ce^(3+)can be improved by substituting partial Sc atoms with smaller cations.The thermal quenching mechanism of BSBO:Ce^(3+)and the lattice occupancy of Ce ions in BSBO are discussed in detail.Furthermore,by combining the green phosphor BSBO:Ce^(3+),the commercial blue phosphor and the red phosphor on a 405 nm chip,a white light source was obtained with a high average color rendering index(CRI)of 96.6,a low correlated color temperature(CCT)of 3988 K,and a high luminous efficacy of 88.0 Im/W.The lu-minous efficacy of the WLED exhibits negligible degradation during the 1000 h light aging experiment.What's more,an emission peak at 468 nm appears when excited at 352 nm and 80 K,however,the relative intensity of the peaks at 468 and 525 nm gradually weakens with increasing temperature,indicating the potential of this material as a low-temperature sensor.展开更多
Counter beam lighting was introduced as well as transverse symmetrical lighting and longitudinal symmetrical lighting.Simulation experiments were carried out by using DIAlux lighting software for the above three light...Counter beam lighting was introduced as well as transverse symmetrical lighting and longitudinal symmetrical lighting.Simulation experiments were carried out by using DIAlux lighting software for the above three lighting methods.The results show that counter beam lighting is more reasonable to be adopted in the tunnel entrance zone because its threshold increment of disability glare is greater.Counter beam lighting can improve the background luminance of the obstacles and lighting efficiency compared with transverse symmetrical lighting and longitudinal symmetrical lighting.Therefore,tunnel lighting energy-saving can be achieved by reducing the road luminance demands and luminaries power.Longitudinal symmetrical lighting is conducive to the large luminaries spacing in the tunnel internal zone;so power consumption can be reduced by decreasing the number of luminaries used.Tunnel walls are unsuitable to pave with smooth or bright material.Installation height of the luminaries has less effect on counter beam lighting.展开更多
In order to acquire the most energy-saving luminairedistribution-parameters(LDPs)of highway tunnel interior zone backlighting,the parameters optimization model(POM)of backlighting for tunnel interior zone was establis...In order to acquire the most energy-saving luminairedistribution-parameters(LDPs)of highway tunnel interior zone backlighting,the parameters optimization model(POM)of backlighting for tunnel interior zone was established.Yanlieshan tunnel of Jiujing highway was taken as an example for the optimization.The optimal LDPs of the backlighting system of the tunnel interior zone were obtained by the POM,a comparison between the optimization results and those of Yanlieshan tunnel’s actual lighting system was performed,which showed that the optimized backlighting system with LED lamps installed according to the optimized LDPs could save energy remarkablely even under full capacity lighting condition.Illuminance and illuminance uniformity of the tunnel road surface still met the lighting demands even the LED lamp’s luminance decreased by 30%.A backlighting simulation experiment with the optimized backlighting LDPs for Yanlieshan tunnel was accomplished in the software Dialux.The simulation results basically agreed with the optimization calculated results from the POM which proved the correctness of the backlighting POM.展开更多
At the scheme design stage,the potential of daylighting is significant due to the saving for electric lighting use. There are few simple tools for architects to optimize the daylighting design. Therefore,it is useful ...At the scheme design stage,the potential of daylighting is significant due to the saving for electric lighting use. There are few simple tools for architects to optimize the daylighting design. Therefore,it is useful to develop a design guideline related to the evaluation of lighting energy saving potential and sunlight design strategies. This paper analyzes the impacts of different artificial lighting control methods and design parameters on daylighting. A direct correlation between lighting energy consumption and parameters such as orientations,window to wall ratio (WWR) and perimeter depth is established. A simplified prediction model is proposed to estimate lighting energy consumption with the given perimeter depth,WWR,and window transparency. Validation of the model is carried out compared with detailed lighting simulation software for an office building. After the variation analysis for these parameters,design advises for the daylighting design at scheme design phase are summarized.展开更多
Studied are the controller design and basic principles of intelligent lighting network. TI’s MSP430F123 is used as a main controller. By using the ZigBee modules(Xbee/Xbee-PRO) and the GSM module(SIM300C) for wireles...Studied are the controller design and basic principles of intelligent lighting network. TI’s MSP430F123 is used as a main controller. By using the ZigBee modules(Xbee/Xbee-PRO) and the GSM module(SIM300C) for wireless communications, the lighting control is enabled to access wireless network. This system uses a mobile phone to achieve light on-off directly, which can accomplish wireless control of intelligent lighting in families.展开更多
Daylighting studies in buildings are key parts of environmental analysis and can be easily conducted at the early stages of design as part of environmentally responsive building design as well as to inform the final a...Daylighting studies in buildings are key parts of environmental analysis and can be easily conducted at the early stages of design as part of environmentally responsive building design as well as to inform the final architectural layout and interior design. The main aim of this study is to demonstrate how such daylighting studies can be completed at the early stages of design and, at the same time, to show the impact of window design and positioning on building indoor environments. The paper is focused on a study of window influence on room daylighting in residential buildings and computer lighting simulations in software packages： Windows Daylighting System and Autodesk Ecotect Analysis, have been carried out for different style and positioning of windows using several case studies. The main findings clearly indicated that not only the window size and style matters, but also the positioning of windows considering external walls which would make a significant influence on room daylighting levels and, therefore, such daylight studies are very important for the early stage of environmental analysis during building design.展开更多
As energy gradually becomes a more valuable commodity, the desire for reduced energy losses strengthens. Lighting is a critical field on this matter, as it accounts for a large percentage of the global electricity con...As energy gradually becomes a more valuable commodity, the desire for reduced energy losses strengthens. Lighting is a critical field on this matter, as it accounts for a large percentage of the global electricity consumption and modern lighting systems are greatly more efficient than incandescent, discharge, and fluorescent lights. Previous research has proven that plants do not require the entire visible spectrum but react only to specific wavelengths, making it possible to control their growth and yield via artificial lighting. The flexibility of control of Light Emitting Diode (LED) lights allows for the combination of great energy losses reduction and controlled plant growth, achieving the improvement of two major parameters in a single action. This review paper summarizes the current research on the effect different light wavelengths have on specific plant species and discusses the applications of LED lighting for horticulture, yield storage, and disease protection.展开更多
The ways which are used today in order to light houses, offices, and most of </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">indoor a...The ways which are used today in order to light houses, offices, and most of </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">indoor areas are inefficient as a lot of energy is consumed unnecessarily during the day time. Mainly this problem</span><span style="font-size:10pt;font-family:""> </span><span style="font-family:Verdana;">because the interior lighting design consider the worst case when the light service is at night, </span><span style="font-family:Verdana;">which</span><span style="font-family:Verdana;"> is not always valid. Also in most cases the lighting system design rel</span><span style="font-family:Verdana;">ies</span><span style="font-family:Verdana;"> on people to control the lights switching on and off. This problem is also one of the design concern</span><span style="font-family:Verdana;">s</span><span style="font-family:Verdana;"> in Green Building. In this paper, a solution to this problem and a method for people’s comfort who use the indoor facilities in industrial building</span><span style="font-family:Verdana;">s</span><span style="font-family:Verdana;"> is presented. In the proposed smart lighting system, lights switch on automatically when there is somebody in the room or in the occupied space and switch off when there is no occupancy. In addition to this known technique, adjustment of the brightness level of the lights will be possible via the personal computer or any other smart device. In this method, for the illumination level in the area, where is needed to be controlled for better energy saving, </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">light automatically is measured by </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">sensor and considering the amount of background lights coming from outside, automatically the brightness of lights is controlled to reach the preset level that determined for that room. By the means of this method, it is possible to provide better user comfort, avoid human forcedness to switch the light on and off, and hence effective energy sav</span><span style="font-family:Verdana;">ing</span><span style="font-family:Verdana;">. Arduino controller is used to build the controller and to demonstrate the results. Economic analysis was done to calculate the percentage of the energy saving that can be obtained by implementing the proposed smart lighting controller. As an outcome </span><span style="font-family:Verdana;">of </span><span style="font-family:Verdana;">the economic analysis, energy saving norm for an office with </span><span style="font-family:Verdana;">a </span><span style="font-family:Verdana;">standard size was calculated.展开更多
With China’s continued development of society and economy, the importance of ecological environmental protection is growing. This protection has become an indispensable part of social development. The use of various ...With China’s continued development of society and economy, the importance of ecological environmental protection is growing. This protection has become an indispensable part of social development. The use of various green environmental protection equipment can effectively promote ecological environmental protection and reduce the adverse effects of human activities on the environment. In the field of sports lighting equipment in China, traditional lighting methods constitute an inherent danger to the environment, leading to a waste of valuable resources and environmental pollution. This study involves a multi-tile-multifunctional-function controller, which effectively solves the control problem of the control light. In the sports lighting group, the high and low-level lighting of the sports lighting group, and adjust the light from the height highly effectively to adjust each height. The low-shot mode reduces the power consumption of the system by about 33% to 60%, which significantly helps energy saving. By optimizing the performance of the lighting system, promoting the preservation of power resources, reducing the adverse effects of pollution caused by equipment utilization and energy waste, and promoting the harmonious cohabitation of human and natural environment. .展开更多
基金supported by the National Natural Science(No.U19A2063)the Jilin Provincial Development Program of Science and Technology (No.20230201080GX)the Jilin Province Education Department Scientific Research Project (No.JJKH20230851KJ)。
文摘The visual noise of each light intensity area is different when the image is drawn by Monte Carlo method.However,the existing denoising algorithms have limited denoising performance under complex lighting conditions and are easy to lose detailed information.So we propose a rendered image denoising method with filtering guided by lighting information.First,we design an image segmentation algorithm based on lighting information to segment the image into different illumination areas.Then,we establish the parameter prediction model guided by lighting information for filtering(PGLF)to predict the filtering parameters of different illumination areas.For different illumination areas,we use these filtering parameters to construct area filters,and the filters are guided by the lighting information to perform sub-area filtering.Finally,the filtering results are fused with auxiliary features to output denoised images for improving the overall denoising effect of the image.Under the physically based rendering tool(PBRT)scene and Tungsten dataset,the experimental results show that compared with other guided filtering denoising methods,our method improves the peak signal-to-noise ratio(PSNR)metrics by 4.2164 dB on average and the structural similarity index(SSIM)metrics by 7.8%on average.This shows that our method can better reduce the noise in complex lighting scenesand improvethe imagequality.
基金2024 Science and Technology Commissioner Service Group's Emergency Science and Technology Research Project for Wind Disaster Relief in Hainan Province(ZDYF2024YJGG002-8)China Huaneng Group Co.,Ltd.Headquarters Technology Project,Optimization of Photovoltaic Vegetable Greenhouse Structure and Research on Planting Agronomy in Tropical Regions(HNKJ22-HF77)。
文摘In the tropical regions represented by Hainan,there are abundant solar and thermal resources,and it is relatively suitable for the construction of photovoltaic greenhouse(PVG).However,the construction of PVG still relies mainly on experience and is incapable of quantifying the balance between the photovoltaic(PV)generation and the light requirements for agricultural production.As a result,actual PVGs are primarily PV-based,without carefully considering the needs of agricultural daylighting.To quantify the influence of the design parameters of PVGs and the layout of PV panels on the internal daylighting of serrated PVGs,and to optimize the daylighting design of the roof,this paper utilizes the Design Builder software to establish gradient models for a multi-span serrated-type PVG in tropical regions.Gradient models were established in terms of aspects,namely span,width of longitudinal/transverse daylighting strip,height,roof angle,and photovoltaic panel coverage rate(PCR).Daylighting in the greenhouse of each gradient model was simulated,and with the annual average daily light integral(A_(DLI))and distribution uniformity(DU)as evaluation indicators,the influence of various design parameters on the daylighting inside the greenhouse was quantified.The result reveals that:(1)PCR is the decisive indicator for daylighting in the PVG,and a function between PCR and the A_(DLI) is derived as A_(DLI)=-15.5 PCR+16.841;(2)Increasing the width of longitudinal daylighting strip significantly improves the A_(DLI) and enhances DU while increasing the span has a noticeable effect on improving A_(DLI) but does not significantly enhance DU;(3)Increasing the eave height without changing PCR does not enhance A_(DLI) but effectively improves DU;increasing the transverse daylighting strip and adjusting the roof angle hardly improves A_(DLI).In summary,it is recommended that the optimal span for PVGs in tropical regions be set within the range of 6.5-8.0m,and the eave height be set within the range of 2.5-3.5m.Preferably,the longitudinal daylighting strip with a width ranging from 0.5-0.8m should be installed.Based on the above relationship function,the PCR can be calculated according to the appropriate light demand for the cultivated crops.The daylighting design theory proposed in this paper can provide a theoretical basis and reference for the healthy development of the PV industry in tropical regions.
基金funded by the Doctor Foundation of Southwest University of Science and Technology,grant number:24zx7116.
文摘Supplemental lighting has emerged as a widely adopted technique in greenhouse cultivation to enhance product visibility andimprove theflavor characteristics ofChinese bayberry(Myrica rubra)in the internationalmarket.While studies on lighting have predominantly focused on colorimetry,limited research has addressed the precise control of chromatic parameters and their effect on fruit quality.This study examined the effects of varying lighting conditions,specifically correlated color temperatures and illuminance,on the growth and quality of Chinese bayberry varieties“Black Charcoal”and“Dongkui”using a precision control system.The bayberry plants were exposed to a constant illuminance of 155μmol·m^(-2)·s^(-1) with chromatic levels ranging from 2250 to 6000 K.Black Charcoal demonstrated substantial improvements under different chromatic parameters,with fruit weight and size increasing by 40%and 14%,respectively.Furthermore,soluble solids content increased by 4% and vitamin C content rose by 142%,while organic acid content decreased by 30%.Dongkui,however,showed more modest responses under identical conditions,with fruit weight increasing by 2% and fruit size decreasing by 1%.Soluble solids and vitamin C contents showed minimal increases of 2% and 2.5%,respectively,while organic acid content decreased by 8%.The findings demonstrate that supplemental LED lighting significantly enhances both yield and quality parameters in Black Charcoal compared with Dongkui.These results provide valuable insights for optimizing Chinese bayberry cultivation,and the precise control methodology developed can be used to improve supplemental lighting strategies in other fruit and plant species.
基金supported by grants from Key laboratory of Ecology and Environment in Minority Area,National Ethnic Affairs Commission(KLEEMA202207)。
文摘The rapid expansion of urbanization has led to widespread exposure of wild birds to intensive light at night(LAN).While previous studies have established LAN-induced cognitive impairment in birds,the underlying neurobiological mechanisms remain poorly understood.We hypothesized that LAN exposure impaired cognitive function of birds potentially through neurodegeneration,metabolic dysregulation and neuroinflammatory responses in the telencephalon.Using Zebra Finches(Taeniopygia guttata)as an avian model,under 16L:8D photoperiods,we compared associative learning and memory abilities and neurobiological parameters between experimental groups exposed to dim light at night(LAN)versus nocturnal darkness(CTR).Compared to the CTR birds,the LAN-exposed birds exhibited significantly lower learning and memory performances,reduced neuron density and simplified dendritic morphology in the telencephalons.The key energy metabolic substrates(cholic acid,CTP,D-mannose-6-phosphate)and neuroprotective agents(trehalose,menaquinone,L-gulono-1,4-lactone)in the telencephalons of LAN-exposed birds showed depletion,while oxidative stress markers(methionine sulfoxide)and inflammatory mediators(cis-gondoic acid)exhibited elevation.The neurotransmitter dopamine and histamine metabolic pathway were disrupted in the LAN-exposed birds.The microglias were activated with pro-inflammatory IL-1βand IL-6 levels increasing and anti-inflammatory IL-10 decreasing in the telencephalons of the LAN-exposed birds.These findings indicate a potential mechanistic pathway whereby dim light exposure at night can induce neuroinflammation through oxidative stress-mediated microglial activation,energy metabolism and neurotransmitter homeostasis disruption,ultimately leading to neurodegeneration in the telencephalons of birds.
文摘Currently,most conventional street lighting systems use a constant light mode throughout the entire night,fromsunset to sunrise,which results in high energy consumption and maintenance costs.Furthermore,scientific research predicts that energy consumption for street lighting will increase in the coming years due to growing demand and rising electricity prices.The dimming strategy is a current trend and a key concept in smart street lighting systems.It involves turning on the road lights only when a vehicle or pedestrian is detected;otherwise,the control system reduces the light intensity of the lamps.Power control is generally implemented using artificial intelligence algorithms such as fuzzy logic,artificial neural networks,or swarm intelligence to manage different events.In our project,the dimming strategy was utilized to reduce costs and energy consumption by at least 48%.This research proposes a standalone photovoltaic plant(SPP)to power a smart street lighting system,which can replace individual solar street lights in a small neighborhood in southwestern Algeria.This design offers advantages such as lower costs and the option to add additional loads a DC pump,a domestic power supply,or technical services to operate the photovoltaic system during the day after charging the storage batteries,especially when there is monthly energy surplus.The energy surplus analyzed in our project ranges from 804 W in January to 4 kW in June,generated by the entire PV installation.To demonstrate the feasibility and reliability of this system,we studied the implementation of the standalone photovoltaic plant,energymanagement,and economic analysis using the Particle SwarmOptimization technique under MATLAB software.
基金Project supported by National Natural Science Foundation of China(62075203,12304460)Zhejiang Provincial Natural Science Foundation of China(LQ23A040007)Basic Public Welfare Research Program of Zhejiang Province(LDT23F05013F05)。
文摘Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty to coexisting with other multivalent activated ions(such as Eu^(3+),Tm^(3+)),which greatly hinders the formation of full spectrum.In this study,a calcium vacancy enhanced self-reduction of Ce^(4+)is realized in CaNaSb_(2)O_(6)F(CNSOF)host under air atmosphere sintering,through which Ce^(3+),Tm^(3+)and Eu^(3+)coexisting in a single-phase full spectrum phosphor was prepared.Notably,the artificial introduction of a calcium vacancy was designed to verify this self-reduction mechanism.Moreover,the energy transfer kinetics among Tm^(3+),Ce^(3+)and Eu^(3+)were explored.Finally,combined with a 340 nm UV chip,a full spectrum phosphor-converted light-emitting diode(pc-LED)was fabricated,showing a broad emission range from 400 to 750 nm,Commission Internationale de I'Edairage(CIE)of(0.3485,0.3673),Ra of 92 and correlated color temperature(CCT)of 4933 K.Utilizing the variation in emission colors of this phosphor under different UV wavelengths,a dual encryption method combining point character code and fluorescent encryption technique is proposed.This work provides an effective path for Ce^(4+)self-reduction to apply in full spectrum pc-LED and information encryption.
基金Project supported by the Science and Technology Project of Shenzhen City (JSGG20210802154213040)the Guangdong Basic and Applied Basic Research Foundation (2024A1515010001)the Shenzhen Postdoctoral Research Funding Project。
文摘All-inorganic reflective phosphor-in-glass film(PiGF) converter has garnered widespread attentions for high brightness laser-driven white lighting,while its poor color quality and low luminescence stability have been inevitable roadblocks.Herein,the bicolor PiGF containing green-emitting Y3Al3.08Ga1.92O12:Ce3+(YAGG) and red-emitting CaAlSiN_(3):Eu^(2+)(CASN) phosphors bonded on Al2O3substrate was prepared for enabling high color quality laser-driven white lighting in reflective configuration.The bicolor PiGF has high quantum efficiency and good structure stability.By optimizing the CASN content,PiGF thickness and Al_(2)O_(3) content,the reflective bicolor PiGF based white laser diode(LD)displays good luminescence performance with a luminous flux of 451.5 lm and a luminous efficacy of142.3 lm/W and high color quality with a color rendering index(CRI) of 85.3 and a correlated color temperature(CCT) of 5177 K under the incident laser power of 3.15 W,and still has excellent luminescence and color stabilities(CRI and CCT) under the continuous laser excitation of 5.61 W,attributed to the good thermal conductivity and high reflectivity of Al_(2)O_(3) substrate and scattering enhancement effect of Al_(2)O_(3) particles.It can be foreseen that the reflective bicolor PiGF converter provides a promising strategy for enabling high quality laser-driven white lighting.
基金financially supported by the National Natural Science Foundation of China(No.1237040868).
文摘In recent years,the development of solid-state lighting devices has increasingly shifted towards high-power laser illumination,making it imperative to develop fluorescent conversion materials with exceptional thermal stability and luminous quality.In this study,we introduced a highly reflective TiO_(2) substrate in combination with a high thermal conductivity AlN substrate to design a Ce:YAG-PiG-TiO_(2)-AlN Film(Ce:YAG PTAF)color converter with outstanding photothermal performance.Remarkably,the thermal conductivity of this material reaches 48.28 W m^(-1) K^(-1).Notably,the optimized PTAF can withstand a high-power output of up to 12.14 W in a static environment,with a maximum luminous flux(LFmax)of 2284.6 lm and maximum luminous efficacy(LEmax)of 222.35 lm W^(-1),showcasing its excellent optical properties.Furthermore,the fabricated Ce:YAG-PiG-TiO_(2)-AlN-Wheel(Ce:YAG PTAW),equipped with a motor operating at 7200 r/min,emits an extraordinary brightness of 4404 lm under 88 W of ultra-high laser irradiation,with stability surpassing that of commercial silicone color wheels,thanks to its superior Li_(2)O-Al_(2)O_(3)-SiO_(2)(LAS)glass system.Interestingly,we designed an innovative spatially separated two-color segmented wheel structure,effectively mitigating the photon reabsorption phenomenon caused by the overlap of the fluorescent powder absorption peaks.When the ratio of Ce:YAG to Ce:GdYAG is 240:120,it yields white light with a color rendering index(CRI)of 80.2,and luminous flux remaining at 3317.8 lm.When encapsulated in a reflective module,it accurately reflects the true color states of objects.These results collectively indicate that both Ce:YAG PTAF and PTAW possess significant application potential in the realm of high-power laser illumination.
基金funded by the Project of Philosophy and Social Science Key Research Base−Industrial Transformation and Innovation Research Center of Zigong Municipal Federation of Social Sciences[Grant No.CZ23B02].
文摘China’s economy has developed rapidly since its reform and opening-up.However,the different rates of development in various places due to location and policies have led to significant economic differences.Based on the nighttime lighting data of 281 municipal spatial units in China from 2013 to 2021,this study uses spatial autocorrelation,center of gravity shift,and standard deviation ellipse(SDE)analysis to examine the evolution of the spatial pattern of China’s municipal economy.Based on these,it uses a geographically weighted regression(GWR)model to explore the factors influencing the differences in China’s municipal economy and its spatial heterogeneity.The paper reveals the following results.First,China’s municipal economy as a whole shows a growing trend.Second,the SDE shows a“north-south”distribution pattern,and the concentration of China’s economic development has slightly increased,with a significant centripetal distribution.Third,spatial correlation shows spatial positive correlation,the degree of which is increasing,with strong spatial heterogeneity and regional agglomeration.Finally,measuring the influencing factors according to GWR,the industrial structure and education expenditure coefficients generally show a decreasing trend from the southeast coast to the northwest and inland due to the degree of transformation of industrial structure and the lagging effect of education expenditure on economic growth.Conversely,the innovation driver and urban area coefficients show a decreasing trend from the northwest inland to the southeast coast due to the law of diminishing marginal utility of innovation drivers and differences in urbanization development.Government expenditure coefficients show a higher trend in the East and a lower trend in the West due to policy favoritism and market development level.This research can serve as a theoretical reference for China to achieve high-quality development and move toward common prosperity.
基金supported by the National Key Research and Development Program(MOST,No.2022YFE0108800)the National Natural Science Foundation of China(Nos.52272165,U2005213 and 52172157)the Major Science and Technology Projects of Xiamen Science and Technology Bureau(No.3502Z20231018).
文摘Solid-state lighting is now developing toward high-power and super-brightness,but is largely limited by the lack of highly robust and efficient color conversion materials that can be survived from high-power or high-power density excitation,typically the red-emitting ones.In this work,we fabricated highly effi-cient and pore-free Sr_(0.5)Ca_(0.5)AlSiN_(3)∶Eu^(2+)(SCASN)red-emitting ceramics by spark plasma sintering of fine phosphor powders.These fine phosphor powders were prepared by treating the commercial phosphors with high-energy ball-milling,centrifugation and acid washing,leading to a particle size of 2.55μm and an internal quantum efficiency as high as 74.0%under 450 nm excitation.The phosphor powders can be densified into SCASN ceramics without using sintering additives at a temperature as low as 1475℃,and the ceramics show an internal quantum efficiency of 75.3%,which is 50%higher than those ceram-ics fabricated with untreated commercial powders.When excited by a high-power blue LED at a current density of 4 A/mm^(2),the SCASN ceramics have a maximum luminous flux of 660 lm(i.e.,26 Mcd/m^(2)).The phosphor ceramics can also withstand a high laser power density of 15.7 W/mm^(2),and exhibit an output luminance of 188 Mcd/m^(2).This work provides a general method to prepare fine phosphor powders that enable to fabricate high efficiency phosphor ceramics used in high-power solid-state lighting.
基金the National Natural Science Foundation of China(22003035,21963006,22073061)the Project of Shaanxi Province Youth Science and Technology New Star(2023KJXX-076)the National Training Program of Innovation and Entrepreneurship for Undergraduates(202314390018)。
文摘The utilization of phosphors that achieve full-spectrum lighting has emerged as a prevailing trend in the advancement of white light-emitting diode(WLED)lighting.In this study,we successfully prepared a novel green phosphor Ba_(2)Sc_(2)((BO_(3))_(2)B_(2)O_(5)):Ce^(3+)(BSBO:Ce^(3+))that can be utilized for full-spectrum lighting and low-temperature sensors.BSBO:Ce^(3+)exhibits a broad-band excitation spectrum centered at 410 nm,and a broad-band emission spectrum centered at 525 nm.The internal and external quantum efficiencies of BSBO:Ce^(3+)are 99%and 49%,respectively.The thermal stability of BSBO:Ce^(3+)can be improved by substituting partial Sc atoms with smaller cations.The thermal quenching mechanism of BSBO:Ce^(3+)and the lattice occupancy of Ce ions in BSBO are discussed in detail.Furthermore,by combining the green phosphor BSBO:Ce^(3+),the commercial blue phosphor and the red phosphor on a 405 nm chip,a white light source was obtained with a high average color rendering index(CRI)of 96.6,a low correlated color temperature(CCT)of 3988 K,and a high luminous efficacy of 88.0 Im/W.The lu-minous efficacy of the WLED exhibits negligible degradation during the 1000 h light aging experiment.What's more,an emission peak at 468 nm appears when excited at 352 nm and 80 K,however,the relative intensity of the peaks at 468 and 525 nm gradually weakens with increasing temperature,indicating the potential of this material as a low-temperature sensor.
基金Funded by Key Laboratory of Ministry of Education for Conveyance and Equipment,East China Jiaotong University(No. 09JD09)
文摘Counter beam lighting was introduced as well as transverse symmetrical lighting and longitudinal symmetrical lighting.Simulation experiments were carried out by using DIAlux lighting software for the above three lighting methods.The results show that counter beam lighting is more reasonable to be adopted in the tunnel entrance zone because its threshold increment of disability glare is greater.Counter beam lighting can improve the background luminance of the obstacles and lighting efficiency compared with transverse symmetrical lighting and longitudinal symmetrical lighting.Therefore,tunnel lighting energy-saving can be achieved by reducing the road luminance demands and luminaries power.Longitudinal symmetrical lighting is conducive to the large luminaries spacing in the tunnel internal zone;so power consumption can be reduced by decreasing the number of luminaries used.Tunnel walls are unsuitable to pave with smooth or bright material.Installation height of the luminaries has less effect on counter beam lighting.
基金National Natural Science Foundation of China(No.61463015)
文摘In order to acquire the most energy-saving luminairedistribution-parameters(LDPs)of highway tunnel interior zone backlighting,the parameters optimization model(POM)of backlighting for tunnel interior zone was established.Yanlieshan tunnel of Jiujing highway was taken as an example for the optimization.The optimal LDPs of the backlighting system of the tunnel interior zone were obtained by the POM,a comparison between the optimization results and those of Yanlieshan tunnel’s actual lighting system was performed,which showed that the optimized backlighting system with LED lamps installed according to the optimized LDPs could save energy remarkablely even under full capacity lighting condition.Illuminance and illuminance uniformity of the tunnel road surface still met the lighting demands even the LED lamp’s luminance decreased by 30%.A backlighting simulation experiment with the optimized backlighting LDPs for Yanlieshan tunnel was accomplished in the software Dialux.The simulation results basically agreed with the optimization calculated results from the POM which proved the correctness of the backlighting POM.
基金Project(2006BAJ02A02) supported by the National Key Technologies R & D Program of China
文摘At the scheme design stage,the potential of daylighting is significant due to the saving for electric lighting use. There are few simple tools for architects to optimize the daylighting design. Therefore,it is useful to develop a design guideline related to the evaluation of lighting energy saving potential and sunlight design strategies. This paper analyzes the impacts of different artificial lighting control methods and design parameters on daylighting. A direct correlation between lighting energy consumption and parameters such as orientations,window to wall ratio (WWR) and perimeter depth is established. A simplified prediction model is proposed to estimate lighting energy consumption with the given perimeter depth,WWR,and window transparency. Validation of the model is carried out compared with detailed lighting simulation software for an office building. After the variation analysis for these parameters,design advises for the daylighting design at scheme design phase are summarized.
基金Special Fund Project for Technology Innovation of Tianjin City(06FZZDGX01800)
文摘Studied are the controller design and basic principles of intelligent lighting network. TI’s MSP430F123 is used as a main controller. By using the ZigBee modules(Xbee/Xbee-PRO) and the GSM module(SIM300C) for wireless communications, the lighting control is enabled to access wireless network. This system uses a mobile phone to achieve light on-off directly, which can accomplish wireless control of intelligent lighting in families.
文摘Daylighting studies in buildings are key parts of environmental analysis and can be easily conducted at the early stages of design as part of environmentally responsive building design as well as to inform the final architectural layout and interior design. The main aim of this study is to demonstrate how such daylighting studies can be completed at the early stages of design and, at the same time, to show the impact of window design and positioning on building indoor environments. The paper is focused on a study of window influence on room daylighting in residential buildings and computer lighting simulations in software packages： Windows Daylighting System and Autodesk Ecotect Analysis, have been carried out for different style and positioning of windows using several case studies. The main findings clearly indicated that not only the window size and style matters, but also the positioning of windows considering external walls which would make a significant influence on room daylighting levels and, therefore, such daylight studies are very important for the early stage of environmental analysis during building design.
文摘As energy gradually becomes a more valuable commodity, the desire for reduced energy losses strengthens. Lighting is a critical field on this matter, as it accounts for a large percentage of the global electricity consumption and modern lighting systems are greatly more efficient than incandescent, discharge, and fluorescent lights. Previous research has proven that plants do not require the entire visible spectrum but react only to specific wavelengths, making it possible to control their growth and yield via artificial lighting. The flexibility of control of Light Emitting Diode (LED) lights allows for the combination of great energy losses reduction and controlled plant growth, achieving the improvement of two major parameters in a single action. This review paper summarizes the current research on the effect different light wavelengths have on specific plant species and discusses the applications of LED lighting for horticulture, yield storage, and disease protection.
文摘The ways which are used today in order to light houses, offices, and most of </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">indoor areas are inefficient as a lot of energy is consumed unnecessarily during the day time. Mainly this problem</span><span style="font-size:10pt;font-family:""> </span><span style="font-family:Verdana;">because the interior lighting design consider the worst case when the light service is at night, </span><span style="font-family:Verdana;">which</span><span style="font-family:Verdana;"> is not always valid. Also in most cases the lighting system design rel</span><span style="font-family:Verdana;">ies</span><span style="font-family:Verdana;"> on people to control the lights switching on and off. This problem is also one of the design concern</span><span style="font-family:Verdana;">s</span><span style="font-family:Verdana;"> in Green Building. In this paper, a solution to this problem and a method for people’s comfort who use the indoor facilities in industrial building</span><span style="font-family:Verdana;">s</span><span style="font-family:Verdana;"> is presented. In the proposed smart lighting system, lights switch on automatically when there is somebody in the room or in the occupied space and switch off when there is no occupancy. In addition to this known technique, adjustment of the brightness level of the lights will be possible via the personal computer or any other smart device. In this method, for the illumination level in the area, where is needed to be controlled for better energy saving, </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">light automatically is measured by </span><span style="font-family:Verdana;">the </span><span style="font-family:Verdana;">sensor and considering the amount of background lights coming from outside, automatically the brightness of lights is controlled to reach the preset level that determined for that room. By the means of this method, it is possible to provide better user comfort, avoid human forcedness to switch the light on and off, and hence effective energy sav</span><span style="font-family:Verdana;">ing</span><span style="font-family:Verdana;">. Arduino controller is used to build the controller and to demonstrate the results. Economic analysis was done to calculate the percentage of the energy saving that can be obtained by implementing the proposed smart lighting controller. As an outcome </span><span style="font-family:Verdana;">of </span><span style="font-family:Verdana;">the economic analysis, energy saving norm for an office with </span><span style="font-family:Verdana;">a </span><span style="font-family:Verdana;">standard size was calculated.
文摘With China’s continued development of society and economy, the importance of ecological environmental protection is growing. This protection has become an indispensable part of social development. The use of various green environmental protection equipment can effectively promote ecological environmental protection and reduce the adverse effects of human activities on the environment. In the field of sports lighting equipment in China, traditional lighting methods constitute an inherent danger to the environment, leading to a waste of valuable resources and environmental pollution. This study involves a multi-tile-multifunctional-function controller, which effectively solves the control problem of the control light. In the sports lighting group, the high and low-level lighting of the sports lighting group, and adjust the light from the height highly effectively to adjust each height. The low-shot mode reduces the power consumption of the system by about 33% to 60%, which significantly helps energy saving. By optimizing the performance of the lighting system, promoting the preservation of power resources, reducing the adverse effects of pollution caused by equipment utilization and energy waste, and promoting the harmonious cohabitation of human and natural environment. .
