This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A...This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A key objective is to develop a computationally efficient finite element framework capable of accurately capturing the complex behavior of 3D-FGSW plates.The studied configuration features a two-dimensional functionally graded material(2D-FGM)core between two threedimensional functionally graded material(3D-FGM)face layers.Nonlinear geometric effects,including mid-plane stretching,are modeled using von K arm an-type assumptions,and the governing equations are formulated via Hamilton's principle within an improved first-order shear deformation theory(iFSDT).The accuracy and computational efficiency of the proposed method are validated through comparison with existing benchmark solutions.Subsequently,a comprehensive parametric study is carried out to examine the effects of geometric dimensions,material properties,foundation sizes,and boundary conditions(BCs)on the nonlinear vibration of 3D-FGSW plates.The findings of this work are expected to provide valuable insights for the design and manufacturing of advanced sandwich structures subjected to BL.展开更多
Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the ...Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the effects of different additives on mullite formation,as well as the microstructure and properties of the ceramic thin plates.Additionally,the study explored the toughening and strengthening mechanisms induced by the additives,providing a theoretical foundation for further optimizing the toughness of ceramic thin plates.The results showed that the D4 sample fired at 1220℃(with an addition of 20 wt% α-Al_(2)O_(3))exhibited the best performance,with a water absorption rate of 0.07%,apparent porosity of 0.18%,bulk density of 2.75 g·cm^(-3),firing shrinkage of 12.76%,bending strength reaching 101.93 MPa,and fracture toughness of 2.51 MPa·m^(1/2).As the amount ofα-Al_(2)O_(3) additive increased,the ceramic thin plates exhibited a greater abundance of short rod-like mullite and corundum grains,which were tightly packed together,forming a framework for the ceramic thin plates.This microstructure enhanced pathways for crack propagation,dispersed internal stresses,and increased fracture surface energy,resulting in significant improvements in both strength and fracture toughness of the ceramic thin plates.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
We investigate the effects of projectile material on high-speed penetration/perforation of Inconel 718 alloy(IN718)plates.High-speed ballistic impact tests are conducted on 2 mm-thickness IN718 plates with 5-mm-diamet...We investigate the effects of projectile material on high-speed penetration/perforation of Inconel 718 alloy(IN718)plates.High-speed ballistic impact tests are conducted on 2 mm-thickness IN718 plates with 5-mm-diameter stainless steel 304(SS304),Ti alloy TC4,and Al alloy AA1060 spherical projectiles.The impact processes are captured with high-speed photography.Optical and scanning electron microscopy and laser scan are conducted on recovered projectiles and targets.Finite element models of the ballistic impact are established based on the coupled Eulerian-Lagrangian algorithm with the Johnson-Cook constitutive model and failure criterion,and can well reproduce the experimental results.The experimental and simulated data related to projectile dynamics,and the geometries of postmortem projectiles and bullet holes are analyzed with phenomenological models.Projectile velocity evolution can be described with hydrodynamic models of penetration.Dimensional analysis reveals a universal relationship between the bullet hole expansion coefficient and the normalized dynamic pressure,regardless of the projectile material.However,the projectile material does affect projectile deformation,bullet hole size,and energy absorption of target.展开更多
In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattic...For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattice core located in the middle and several homogeneous orthotropic layers that are symmetrical relative to it.For this purpose,the partial differential equations of motion have been derived based on the first-order shear deformation theory,employing Hamilton’s principle and Von Kármán’s nonlinear displacement-strain relations.Then,the nonlinear partial differential equations of the plate are converted into a time-dependent nonlinear ordinary differential equation(Duffing equation)by applying the Galerkin method.From the solution of this equation,the natural frequencies are extracted.Then,to calculate the non-linear frequencies of the plate,the non-linear equation of the plate has been solved analytically using the method of multiple scales.Finally,the effect of some critical parameters of the system,such as the thickness,height,and different angles of the stiffeners on the linear and nonlinear frequencies,has been analyzed in detail.To confirmthe solution method,the results of this research have been compared with the reported results in the literature and finite elements in ABAQUS,and a perfect match is observed.The results reveal that the geometry and configuration of core ribs strongly affect the natural frequencies of the plate.展开更多
TaN coatings were deposited on Ti bipolar plates by magnetron sputtering to improve corrosion resistance and service life.The influence of N_(2) flow rate on the surface morphology,hydrophobicity,crystallinity,corrosi...TaN coatings were deposited on Ti bipolar plates by magnetron sputtering to improve corrosion resistance and service life.The influence of N_(2) flow rate on the surface morphology,hydrophobicity,crystallinity,corrosion resistance,and interfacial contact resistance of TaN coatings was studied.Results show that as the N_(2) flow rate increases,the roughness of TaN coatings decreases firstly and then increases,and the hydrophobicity increases firstly and then decreases.At the N_(2) flow rate of 3 mL/min,TaN coating with larger grain size presents lower roughness and high hydrophobicity.The coating possesses the lowest corrosion current density of 2.82µA·cm^(−2) and the highest corrosion potential of−0.184 V vs.SCE in the simulated proton exchange membrane water electrolyser environment.After a potentiostatic polarization test for 10 h,a few corrosion pits are observed on the TaN coatings deposited at an N_(2) flow rate of 3 mL/min.After 75 h of electrolytic water performance testing,the TaN coating on bipolar plate improves the corrosion resistance and thus enhances the electrolysis efficiency(68.87%),greatly reducing the cost of bipolar plates.展开更多
A theoretical analysis on the perforation of Weldox 460E steel plates struck by flat-nosed projectiles is presented using a previously developed model within a unified framework.This model contains a dimensionless emp...A theoretical analysis on the perforation of Weldox 460E steel plates struck by flat-nosed projectiles is presented using a previously developed model within a unified framework.This model contains a dimensionless empirical equation to describe the variation of energy absorbed through global deformation as a function of impact velocity.The study further investigates the energy absorption mechanisms of Weldox 460E steel plates,with particular focus on the“plateau”phenomenon,i.e.,limited increase in ballistic limit with increasing plate thickness.This phenomenon is explained and compared with results from previously studied 2024-T351 aluminium plates.The model predictions agree well with experimental data for Weldox 460E steel plates impacted by flat-nosed projectiles,including:relationship between global deformation and impact velocity,ballistic limit,residual velocity,and critical conditions for the transition of failure modes.Moreover,the model effectively predicts the“plateau”phenomenon observed in intermediate plate thickness range.It is also found that the indentation absorption energy contributes a significantly larger fraction of the total absorption energy in Weldox 460E steel plates perforated by flat-nosed projectiles than in 2024-T351 aluminium plates,due to the differences in material properties.展开更多
To investigate the effects of surface morphology on properties of carbon coatings on proton exchange membrane fuel cell(PEMFC)Ti bipolar plate,scanning electron microscope(SEM)and confocal laser scanning microscopy(CL...To investigate the effects of surface morphology on properties of carbon coatings on proton exchange membrane fuel cell(PEMFC)Ti bipolar plate,scanning electron microscope(SEM)and confocal laser scanning microscopy(CLSM)were used for characterization and analysis of different Ti foils.Physical vapor deposition(PVD)and chemical vapor deposition(CVD)were used to fabricate the carbon coatings on different Ti foils with same procedure.The initial contact resistance test results show that the contact resistance of the carbon coating on different Ti foils are nearly same.The electrochemical test results show that the 3#titanium foil coating with greater surface fluctuation has a lower corrosion current density,but the accelerated corrosion results show that the 1#and 2#titanium foil coatings with less surface fluctuation had the lower contact resistance and better durability.In conclusion,the results show that titanium foils with greater surface fluctuations are prone to produce more nucleation sites in growth of coatings,and the as-prepared carbon coating exhibited lower corrosion current density.But the coatings show lower durability due to the internal stress.According to results of potentialdynamic polarization and ICR tests,carbon coating with less surface defects and crack shows better durability in CVD procedure,and the carbon coating with flattened surface shows better durability in PVD procedure.展开更多
[Background and purposes]Proton exchange membrane fuel cells(PEMFCs),which convert hydrogen energy directly into electrical energy and water,have received overwhelming attention,owing to their potential to significant...[Background and purposes]Proton exchange membrane fuel cells(PEMFCs),which convert hydrogen energy directly into electrical energy and water,have received overwhelming attention,owing to their potential to significantly reduce energy consumption,pollution emissions and reliance on fossil fuels.Bipolar plates are the major part and key component of PEMFCs stack,which provide mechanical strength,collect and conduct current segregate oxidants and reduce agents.They contribute 70-80%weight and 20-30%cost of a whole stack,while significantly affecting the power density.There are three types plates,including metal bipolar plate,graphite bipolar plate and composite bipolar plate.Stainless steel bipolar plates,as one of metal bipolar plate,exhibit promising manufacturability,competitive cost and durability among various metal materials.However,stainless steel would be corroded in the harsh acid(pH 2-5)and humid PEMFCs environment,whereas the leached ions will contaminate the membrane.In addition,the passivated film formed on the surface will increase the interfacial contact resistance(ICR).In order to improve the corrosion resistance and electrical conductivity of steel bipolar plates,surface coatings are essential.Metal nitride coatings,metal carbide coatings,polymer coatings and carbon-based coatings have been introduced in recent years.Carbon-based coatings,mainly including a-C(amorphous Carbon),Ta-C(Tetrahedral amorphous carbon)and DLC(diamond-like carbon),have attracted considerable attention from both academia and industry,owing to their superior performance,such as chemical inertness,mechanical hardness and electrical conductivity.However,Ta-C films as protective coating of PEMFCs have been rarely reported,due to the difficulty in production for industrial application.In this paper,multi-layer Ta-C composite films were produced by using customized industrial-scale vacuum equipment to address those issues.[Methods]Multiple layered Ta-C coatings were prepared by using PIS624 equipment,which assembled filtered cathodic arc evaporation,ion beam and magnetron sputtering into one equipment,while SS304 and silicon specimens were used as substrate for testing and analysis.Adhesion layer and intermediate layer were deposited by using magnetron sputtering at deposition temperature of 150℃and pressure of 3×10^(−1) Pa,while the sputtering current was set to be 5 A and bias power to be 300 V.The Ta-C layer was coated at arc current of 80-100 A,bias voltage of 1500 V and gas flow of 75 sccm.A scanning electron microscope(CIQTEK SEM3200)was used to characterize surface morphology,coating structure and cross-section profile of the coatings.Raman spectrometer(LabRam HR Evolution,HORIBA JOBIN YVON)was used to identify the bonding valence states.Electrochemical tests were performed by using an electrochemical work station(CHI760,Shanghai Chenhua Instrument Co.,Ltd.),with the traditional three electrode system,where saturated Ag/AgCl and platinum mesh were used as the reference electrode and counter electrode,respectively.All samples were mounted in plastic tube and sealed with epoxy resin,with an exposure area of 2.25 cm^(2),serving as the working electrode.Electrochemical measurements were carried out in simulated PEMFCs cathode environment in 0.5 mol·L^(−1) H_(2)SO_(4)+5 ppm F−solution,at operating temperature of 70℃.As the cathode environment was harsher than the anode environment,all the samples are stabilized at the open-circuit potential(OCP)for approximately 30 min before the EIS measurements.ICR between bipolar plates and GDL was a key parameter affecting performance of the PEMFCs stack.The test sample sandwiched between 2 pieces of carbon paper(simulate gas diffusion layer,GDL)was placed between 2 gold-plated copper electrodes at a compaction pressure of 1.4 MPa,which was considered to be the conventional compaction pressure in the PEMFCs.Under the same conditions,the resistance of a single carbon paper was measured as well.The ICR was calculated according to the formula ICR=1/2(R2−R1)×S,where S was the contact area between GDL and coated stainless steel BPPs.All data of ICR were measured three times for averaging.[Results]The coatings deposited by filtered cathodic arc technology were compact and smooth,which reduced coating porosity and favorable to corrosion resistance.The coating thickness of adhesion and intermediate layers were 180 nm,while the protective Ta-C coating thickness was about 300 nm,forming multiple coating to provide stronger protection for metal bipolar plates.Cr,Ti,Nb and Ta coatings were selected as adhesion layers for comparison.According to electrochemical test,Ta and Nb coatings have higher corrosion resistance.However,Ta and Nb materials would be costly when they are used for mass production.Relatively,Cr and Ti materials were cost effective.Hence,a comprehensive assessment was indispensable to decide the materials to be selected as adhesion layer.Ta-TiN and Ti-TiN combined adhesion and intermediate layer exhibited stronger corrosion resistance,with the corrosion current to be less than 10^(−6) A·cm^(−2).Ta-C protective coating deposited by using filtered cathodic arc technology indicated displayed higher corrosion resistance,with the average corrosion density to be about 1.26×10^(−7) A·cm^(−2).Ta-C coating also shown larger contact angle,with the highest hydrophobicity,which was one of the important advantages for Ta-C,in terms of corrosion resistance.According to Raman spectroscopy,the I(D)/I(G)=549.8/1126.7=0.487,with the estimated fraction of sp^(3) bonding to be in the range of 5154%.The intermediate layer TiN has higher conductivity than the CrN layer.Considering cost,corrosion performance and ICR result,the Ti-TiN layer combination is recommended for industrial scale application.[Conclusions]Multiple layer coating structure of Ta-C film had stronger corrosion resistance;with more than 50%sp^(3) content,while it also had larger water contact angle and higher corrosion resistance than DLC film.The filtered arcing deposition technology was able to make the film to be more consistent and stable than normal arcing technology in terms of the preparation of Ta-C.The coating displayed corrosion density of 1.26×10^(−7) A·cm^(−2) and ICR of less than 5 mΩ·cm^(2),far beyond technical target of 2025 DOE(US Department of Energy).This indicated that the mass-production scale coating technology for PEMFC bipolar plates is highly possible.展开更多
This study presents a theoretical analysis of the perforation process of finite-thickness metal plates(with a thickness ratio of T_0/D = 0.6–1.5) under normal impact by spherical-nosed projectiles. The model is valid...This study presents a theoretical analysis of the perforation process of finite-thickness metal plates(with a thickness ratio of T_0/D = 0.6–1.5) under normal impact by spherical-nosed projectiles. The model is validated over an impact velocity range of 180–1247 m/s. The entire penetration process is divided into three stages: the crater formation stage, the steady stage, and the shear stage. A thicknessdependent dynamic cavity expansion resistance model is first introduced to quantitatively describe the axial resistance experienced by the projectile during the tip-entry and steady stages. Subsequently, a thickness-related damage parameter is proposed to refine the resistance expression during the transition from the steady stage to the shear stage, thereby eliminating discontinuities in resistance across stages. When the projectile fully perforates the target, the model predicts a gradual decay of resistance to zero as the residual ligament thickness vanishes, which better reflects the actual physical behavior. The model is validated using four sets of experimental conditions. In addition, to illustrate the model's applicability more intuitively, a numerical simulation case from the literature is reproduced, and the resulting resistance-time curve is compared with the model output. The results demonstrate that the proposed model agrees well with experimental data in terms of residual velocity, ballistic limit, and penetration resistance. Finally, a method for adjusting the threshold parameter within the resistance function is provided, and the influence of this coefficient on the model predictions is discussed.展开更多
The penetration of ogival-nosed projectiles into ship plates represents a complex impact dynamics issue essential for analyzing structural failuremechanisms.Although stiffenedplates are vital in ship construction,fews...The penetration of ogival-nosed projectiles into ship plates represents a complex impact dynamics issue essential for analyzing structural failuremechanisms.Although stiffenedplates are vital in ship construction,fewstudies have addressed the issue of model equivalence under penetration loading.This study employs numerical simulation to validate an experiment with an ogival-nosed projectile penetrating a Q345 steel plate.Four equivalent stiffened plate methods are proposed based on the area,flexural modulus,moment of inertia,and thickness.The results indicate that thickness equivalence(DM4)is unsuitable for penetration-loaded stiffened plates,except under low-speed,nonpenetrating through impacts,and yields less accuracy than DM1/DM3.DM1,DM2,and DM3 each perform optimally with specific velocity ranges:DM1 at very low(critical)and high velocities,DM3 at low velocities,and DM2 at high speeds.Furthermore,in penetration scenarios,T-shaped stiffeners can be replacedwith rectangular ones,as both exhibit similar failure behaviors and deflection trends,simplifying the design while preserving key structural characteristics.These findings provide valuable insights into the design of protective ship structures.展开更多
Proton exchange membrane fuel cells(PEMFCs)have gained increasing interests as promising power sources due to their ability to convert hydrogen and oxygen directly into electricity with high efficiency and zero greenh...Proton exchange membrane fuel cells(PEMFCs)have gained increasing interests as promising power sources due to their ability to convert hydrogen and oxygen directly into electricity with high efficiency and zero greenhouse gas emissions.Bipolar plates(BPs)are considered as a critical component of PEMFCs,serving to collect current,separate gases,distribute the flow field,and conduct heat.This paper reviews the technical status and advancements in BP materials,with special focus on strategies for enhancing interfacial contact resistance(ICR)and corrosion resistance through conductive polymer(CP)coatings.First,commonly used BP materials in PEMFCs are summarized.Then,the advantages and limitations of various coatings for metallic BPs are discussed.Finally,recent progress in CP coatings for metallic BPs,aimed at achieving high corrosion resistance and low ICR,is comprehensively reviewed.展开更多
Bipolar plates(BPs)are essential multifunctional components in vanadium redox flow batteries(VRFBs)that require excellent electrical conductivity,low permeability,and strong solid support for the stack.However,convent...Bipolar plates(BPs)are essential multifunctional components in vanadium redox flow batteries(VRFBs)that require excellent electrical conductivity,low permeability,and strong solid support for the stack.However,conventional BPs are based on graphite sheets,which provide mechanical properties and corrosion resistance but have limitations in terms of electrical conductivity.Although carbon nanotubes(CNTs)have excellent properties,CNT composites with low CNT volume fractions(10–20%)have increased electrolyte permeability and limited electrical conductivity improvement,resulting in low durability and efficiency for VRFBs.This study proposes a novel concept of horizontally aligned CNT nanocomposite bipolar plate(HACN-BP)to address these issues.The HACN-BPs feature an optimized conduction path with a CNT volume fraction of 59%,resulting in reduced manufacturing time while demonstrating superior conductivity and permeability compared to conventional BPs.Furthermore,integrated HACN-BP mitigates ohmic loss that occurs in the BPs,thereby mitigating the potential drop by 40%.Therefore,the utilization of HACN-BP shows superior performance compared to recent studies,a substantial improvement of more than 6%in energy efficiency and 14%in capacity over conventional BP.展开更多
A lightweight composite resonator,consisting of a soft material acoustic black hole(SABH)and multiple vibration absorbers,is embedded in a plate to achieve localization and absorption of low-frequency vibration energy...A lightweight composite resonator,consisting of a soft material acoustic black hole(SABH)and multiple vibration absorbers,is embedded in a plate to achieve localization and absorption of low-frequency vibration energy.The combination of local and global admissible functions for displacement enhances the accuracy of the Ritz method in predicting vibration localization characteristics within the SABH domain.Utilizing soft materials for the SABH can reduce the mass and frequency of the composite resonator.Due to the lack of orthogonality between global vibration modes and localized modes,the low-frequency localized modes induced by the SABH are used to shape the initial global modes,thereby concentrating the global vibration of the plate in the SABH region.Consequently,the absorbers of the composite resonator only need to be a small fraction of the mass of the local SABH to achieve substantial vibration control of the host plate.This vibration localization strategy can significantly reduce the vibration amplitude of the host plate and enhance the effectiveness of lightweight absorbers in vibration reduction.展开更多
This paper studies the vibration responses of porous functionally graded(FG)thin plates with four various types of porous distribution based on the physical neutral plane by employing the peridynamic differential oper...This paper studies the vibration responses of porous functionally graded(FG)thin plates with four various types of porous distribution based on the physical neutral plane by employing the peridynamic differential operator(PDDO).It is assumed that density and elastic modulus continuously vary along the transverse direction following the power law distribution for porous FG plates.The governing differential equation of free vibration for a porous rectangular FG plate and its associated boundary conditions are expressed by a Lévy-type solution based on nonlinear von Karman plate theory.Dimensionless frequencies and mode shapes are obtained after solving the characteristic equations established by PDDO.The results of the current method are validated through comparison with existing literature.The effects of geometric parameters,material properties,elastic foundation,porosity distribution,and boundary conditions on the frequency are investigated and discussed in detail.The highest fundamental dimensionless frequency occurs under SCSC boundary conditions,while the lowest is under SFSF boundary conditions.The porous FG plate with the fourth pore type,featuring high density of porosity at the top and low at the bottom,exhibits the highest fundamental frequency under SSSS,SFSF,and SCSC boundary conditions.The dimensionless frequency increases with an increase in the elastic foundation stiffness coefficient.展开更多
In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formali...In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formalism and dual-variable and position(DVP)method,the general solution of the coupled fields for the Lamb wave is derived,and then the dispersion equation is obtained by the application of the boundary conditions.First,the influence of semiconducting properties on the dispersion behavior of the Lamb wave in a single-layer PSC plate is analyzed.Then,the propagation characteristics of the Lamb wave in a sandwich plate are investigated in detail.The numerical results show that the wave speed and attenuation depend on the stacking sequence,layer thickness,and initial carrier density,the Lamb wave can propagate without a cut-off frequency in both the homogeneous and multilayer PSC plates due to the semiconducting properties,and the Lamb wave without attenuation can be achieved by carefully selecting the semiconductor property in the upper and lower layers.These new features could be very helpful as theoretical guidance for the design and performance optimization of PSC devices.展开更多
In this study,microstructure and mechanical behavior of Mg/Al composite plates with Ti foil interlayer were systematically studied,with a great emphasis on the effect of different thicknesses of Ti foil interlayer.The...In this study,microstructure and mechanical behavior of Mg/Al composite plates with Ti foil interlayer were systematically studied,with a great emphasis on the effect of different thicknesses of Ti foil interlayer.The results show that compared to 100μm thick Ti foil,10μm thick Ti foil is more prone to fracture and is evenly distributed in fragments at the interface.The introduction of Ti foil can effectively refine the grain size of Mg layers of as-rolled Mg/Al composite plates,10μm thick Ti foil has a better refining effect than 100μm thick Ti foil.Ti foil can effectively increase the yield strength(YS)and ultimate strength(UTS)of as-rolled Mg/Al composite plates,10μm thick Ti foil significantly improves the elongation(El)of Mg/Al composite plate,while 100μm thick Ti foil slightly weakens the El.After annealing at 420℃ for 0.5 h and 4 h,Ti foil can inhibit the formation of intermetallic compounds(IMCs)at the interface of Mg/Al composite plates,which effectively improves the YS,UTS and El of Mg/Al composite plates.In addition,Ti foil can also significantly enhance the interfacial shear strength(SS)of Mg/Al composite plates before and after annealing.展开更多
Liquid cooling through a cold plate offers an efficient solution for battery thermal management.Excellent flow and heat transfer performance can be obtained by optimizing the flow channel structure of the cold plate u...Liquid cooling through a cold plate offers an efficient solution for battery thermal management.Excellent flow and heat transfer performance can be obtained by optimizing the flow channel structure of the cold plate using the topology optimization method.However,due to the uneven channel width of the optimized cold plate,there are some difficulties in processing,which affect its practical application in battery thermal management.In this study,the length scale control method is applied to a topology-optimized cold plate.An optimized cold plate considering length scale control is designed and processed,and its experimental results of flow and heat transfer are compared with those of a traditional cold plate and an optimized cold plate without length scale control.Results show that the relative deviations between the numerical and experimental results with length scale control are within 5%and 8%for temperature and pressure drop,respectively.The flow channel structure of the cold plate with length scale control is simpler and easier to process than that of the cold plate without length scale control.When the inlet velocity is 0.23 m/s,the maximum temperature,maximum temperature difference,and pressure drop of the cold plate with length scale control are 5.7 K,4.4 K,and 0.56 Pa lower than those of the traditional cold plate,respectively.This study provides valuable insights and practical guidance for the manufacturing and implementation of topology-optimized cold plates in battery thermal management systems.展开更多
文摘This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A key objective is to develop a computationally efficient finite element framework capable of accurately capturing the complex behavior of 3D-FGSW plates.The studied configuration features a two-dimensional functionally graded material(2D-FGM)core between two threedimensional functionally graded material(3D-FGM)face layers.Nonlinear geometric effects,including mid-plane stretching,are modeled using von K arm an-type assumptions,and the governing equations are formulated via Hamilton's principle within an improved first-order shear deformation theory(iFSDT).The accuracy and computational efficiency of the proposed method are validated through comparison with existing benchmark solutions.Subsequently,a comprehensive parametric study is carried out to examine the effects of geometric dimensions,material properties,foundation sizes,and boundary conditions(BCs)on the nonlinear vibration of 3D-FGSW plates.The findings of this work are expected to provide valuable insights for the design and manufacturing of advanced sandwich structures subjected to BL.
基金Funded by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China(No.2023YFB4204302)。
文摘Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the effects of different additives on mullite formation,as well as the microstructure and properties of the ceramic thin plates.Additionally,the study explored the toughening and strengthening mechanisms induced by the additives,providing a theoretical foundation for further optimizing the toughness of ceramic thin plates.The results showed that the D4 sample fired at 1220℃(with an addition of 20 wt% α-Al_(2)O_(3))exhibited the best performance,with a water absorption rate of 0.07%,apparent porosity of 0.18%,bulk density of 2.75 g·cm^(-3),firing shrinkage of 12.76%,bending strength reaching 101.93 MPa,and fracture toughness of 2.51 MPa·m^(1/2).As the amount ofα-Al_(2)O_(3) additive increased,the ceramic thin plates exhibited a greater abundance of short rod-like mullite and corundum grains,which were tightly packed together,forming a framework for the ceramic thin plates.This microstructure enhanced pathways for crack propagation,dispersed internal stresses,and increased fracture surface energy,resulting in significant improvements in both strength and fracture toughness of the ceramic thin plates.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by National Natural Science Foundation of China(No.12402465)Sichuan Science and Technology Program(No.2023NSFSC1284)。
文摘We investigate the effects of projectile material on high-speed penetration/perforation of Inconel 718 alloy(IN718)plates.High-speed ballistic impact tests are conducted on 2 mm-thickness IN718 plates with 5-mm-diameter stainless steel 304(SS304),Ti alloy TC4,and Al alloy AA1060 spherical projectiles.The impact processes are captured with high-speed photography.Optical and scanning electron microscopy and laser scan are conducted on recovered projectiles and targets.Finite element models of the ballistic impact are established based on the coupled Eulerian-Lagrangian algorithm with the Johnson-Cook constitutive model and failure criterion,and can well reproduce the experimental results.The experimental and simulated data related to projectile dynamics,and the geometries of postmortem projectiles and bullet holes are analyzed with phenomenological models.Projectile velocity evolution can be described with hydrodynamic models of penetration.Dimensional analysis reveals a universal relationship between the bullet hole expansion coefficient and the normalized dynamic pressure,regardless of the projectile material.However,the projectile material does affect projectile deformation,bullet hole size,and energy absorption of target.
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
文摘For the first time,the linear and nonlinear vibrations of composite rectangular sandwich plates with various geometric patterns of lattice core have been analytically examined in this work.The plate comprises a lattice core located in the middle and several homogeneous orthotropic layers that are symmetrical relative to it.For this purpose,the partial differential equations of motion have been derived based on the first-order shear deformation theory,employing Hamilton’s principle and Von Kármán’s nonlinear displacement-strain relations.Then,the nonlinear partial differential equations of the plate are converted into a time-dependent nonlinear ordinary differential equation(Duffing equation)by applying the Galerkin method.From the solution of this equation,the natural frequencies are extracted.Then,to calculate the non-linear frequencies of the plate,the non-linear equation of the plate has been solved analytically using the method of multiple scales.Finally,the effect of some critical parameters of the system,such as the thickness,height,and different angles of the stiffeners on the linear and nonlinear frequencies,has been analyzed in detail.To confirmthe solution method,the results of this research have been compared with the reported results in the literature and finite elements in ABAQUS,and a perfect match is observed.The results reveal that the geometry and configuration of core ribs strongly affect the natural frequencies of the plate.
基金National Key Research and Development Program of China(2022YFB4002100)National Natural Science Foundation of China(52271136)Natural Science Foundation of Shaanxi Province(2021JC-06)。
文摘TaN coatings were deposited on Ti bipolar plates by magnetron sputtering to improve corrosion resistance and service life.The influence of N_(2) flow rate on the surface morphology,hydrophobicity,crystallinity,corrosion resistance,and interfacial contact resistance of TaN coatings was studied.Results show that as the N_(2) flow rate increases,the roughness of TaN coatings decreases firstly and then increases,and the hydrophobicity increases firstly and then decreases.At the N_(2) flow rate of 3 mL/min,TaN coating with larger grain size presents lower roughness and high hydrophobicity.The coating possesses the lowest corrosion current density of 2.82µA·cm^(−2) and the highest corrosion potential of−0.184 V vs.SCE in the simulated proton exchange membrane water electrolyser environment.After a potentiostatic polarization test for 10 h,a few corrosion pits are observed on the TaN coatings deposited at an N_(2) flow rate of 3 mL/min.After 75 h of electrolytic water performance testing,the TaN coating on bipolar plate improves the corrosion resistance and thus enhances the electrolysis efficiency(68.87%),greatly reducing the cost of bipolar plates.
文摘A theoretical analysis on the perforation of Weldox 460E steel plates struck by flat-nosed projectiles is presented using a previously developed model within a unified framework.This model contains a dimensionless empirical equation to describe the variation of energy absorbed through global deformation as a function of impact velocity.The study further investigates the energy absorption mechanisms of Weldox 460E steel plates,with particular focus on the“plateau”phenomenon,i.e.,limited increase in ballistic limit with increasing plate thickness.This phenomenon is explained and compared with results from previously studied 2024-T351 aluminium plates.The model predictions agree well with experimental data for Weldox 460E steel plates impacted by flat-nosed projectiles,including:relationship between global deformation and impact velocity,ballistic limit,residual velocity,and critical conditions for the transition of failure modes.Moreover,the model effectively predicts the“plateau”phenomenon observed in intermediate plate thickness range.It is also found that the indentation absorption energy contributes a significantly larger fraction of the total absorption energy in Weldox 460E steel plates perforated by flat-nosed projectiles than in 2024-T351 aluminium plates,due to the differences in material properties.
文摘To investigate the effects of surface morphology on properties of carbon coatings on proton exchange membrane fuel cell(PEMFC)Ti bipolar plate,scanning electron microscope(SEM)and confocal laser scanning microscopy(CLSM)were used for characterization and analysis of different Ti foils.Physical vapor deposition(PVD)and chemical vapor deposition(CVD)were used to fabricate the carbon coatings on different Ti foils with same procedure.The initial contact resistance test results show that the contact resistance of the carbon coating on different Ti foils are nearly same.The electrochemical test results show that the 3#titanium foil coating with greater surface fluctuation has a lower corrosion current density,but the accelerated corrosion results show that the 1#and 2#titanium foil coatings with less surface fluctuation had the lower contact resistance and better durability.In conclusion,the results show that titanium foils with greater surface fluctuations are prone to produce more nucleation sites in growth of coatings,and the as-prepared carbon coating exhibited lower corrosion current density.But the coatings show lower durability due to the internal stress.According to results of potentialdynamic polarization and ICR tests,carbon coating with less surface defects and crack shows better durability in CVD procedure,and the carbon coating with flattened surface shows better durability in PVD procedure.
基金Major Science and technology projects of Anhui Province (202103a05020003)。
文摘[Background and purposes]Proton exchange membrane fuel cells(PEMFCs),which convert hydrogen energy directly into electrical energy and water,have received overwhelming attention,owing to their potential to significantly reduce energy consumption,pollution emissions and reliance on fossil fuels.Bipolar plates are the major part and key component of PEMFCs stack,which provide mechanical strength,collect and conduct current segregate oxidants and reduce agents.They contribute 70-80%weight and 20-30%cost of a whole stack,while significantly affecting the power density.There are three types plates,including metal bipolar plate,graphite bipolar plate and composite bipolar plate.Stainless steel bipolar plates,as one of metal bipolar plate,exhibit promising manufacturability,competitive cost and durability among various metal materials.However,stainless steel would be corroded in the harsh acid(pH 2-5)and humid PEMFCs environment,whereas the leached ions will contaminate the membrane.In addition,the passivated film formed on the surface will increase the interfacial contact resistance(ICR).In order to improve the corrosion resistance and electrical conductivity of steel bipolar plates,surface coatings are essential.Metal nitride coatings,metal carbide coatings,polymer coatings and carbon-based coatings have been introduced in recent years.Carbon-based coatings,mainly including a-C(amorphous Carbon),Ta-C(Tetrahedral amorphous carbon)and DLC(diamond-like carbon),have attracted considerable attention from both academia and industry,owing to their superior performance,such as chemical inertness,mechanical hardness and electrical conductivity.However,Ta-C films as protective coating of PEMFCs have been rarely reported,due to the difficulty in production for industrial application.In this paper,multi-layer Ta-C composite films were produced by using customized industrial-scale vacuum equipment to address those issues.[Methods]Multiple layered Ta-C coatings were prepared by using PIS624 equipment,which assembled filtered cathodic arc evaporation,ion beam and magnetron sputtering into one equipment,while SS304 and silicon specimens were used as substrate for testing and analysis.Adhesion layer and intermediate layer were deposited by using magnetron sputtering at deposition temperature of 150℃and pressure of 3×10^(−1) Pa,while the sputtering current was set to be 5 A and bias power to be 300 V.The Ta-C layer was coated at arc current of 80-100 A,bias voltage of 1500 V and gas flow of 75 sccm.A scanning electron microscope(CIQTEK SEM3200)was used to characterize surface morphology,coating structure and cross-section profile of the coatings.Raman spectrometer(LabRam HR Evolution,HORIBA JOBIN YVON)was used to identify the bonding valence states.Electrochemical tests were performed by using an electrochemical work station(CHI760,Shanghai Chenhua Instrument Co.,Ltd.),with the traditional three electrode system,where saturated Ag/AgCl and platinum mesh were used as the reference electrode and counter electrode,respectively.All samples were mounted in plastic tube and sealed with epoxy resin,with an exposure area of 2.25 cm^(2),serving as the working electrode.Electrochemical measurements were carried out in simulated PEMFCs cathode environment in 0.5 mol·L^(−1) H_(2)SO_(4)+5 ppm F−solution,at operating temperature of 70℃.As the cathode environment was harsher than the anode environment,all the samples are stabilized at the open-circuit potential(OCP)for approximately 30 min before the EIS measurements.ICR between bipolar plates and GDL was a key parameter affecting performance of the PEMFCs stack.The test sample sandwiched between 2 pieces of carbon paper(simulate gas diffusion layer,GDL)was placed between 2 gold-plated copper electrodes at a compaction pressure of 1.4 MPa,which was considered to be the conventional compaction pressure in the PEMFCs.Under the same conditions,the resistance of a single carbon paper was measured as well.The ICR was calculated according to the formula ICR=1/2(R2−R1)×S,where S was the contact area between GDL and coated stainless steel BPPs.All data of ICR were measured three times for averaging.[Results]The coatings deposited by filtered cathodic arc technology were compact and smooth,which reduced coating porosity and favorable to corrosion resistance.The coating thickness of adhesion and intermediate layers were 180 nm,while the protective Ta-C coating thickness was about 300 nm,forming multiple coating to provide stronger protection for metal bipolar plates.Cr,Ti,Nb and Ta coatings were selected as adhesion layers for comparison.According to electrochemical test,Ta and Nb coatings have higher corrosion resistance.However,Ta and Nb materials would be costly when they are used for mass production.Relatively,Cr and Ti materials were cost effective.Hence,a comprehensive assessment was indispensable to decide the materials to be selected as adhesion layer.Ta-TiN and Ti-TiN combined adhesion and intermediate layer exhibited stronger corrosion resistance,with the corrosion current to be less than 10^(−6) A·cm^(−2).Ta-C protective coating deposited by using filtered cathodic arc technology indicated displayed higher corrosion resistance,with the average corrosion density to be about 1.26×10^(−7) A·cm^(−2).Ta-C coating also shown larger contact angle,with the highest hydrophobicity,which was one of the important advantages for Ta-C,in terms of corrosion resistance.According to Raman spectroscopy,the I(D)/I(G)=549.8/1126.7=0.487,with the estimated fraction of sp^(3) bonding to be in the range of 5154%.The intermediate layer TiN has higher conductivity than the CrN layer.Considering cost,corrosion performance and ICR result,the Ti-TiN layer combination is recommended for industrial scale application.[Conclusions]Multiple layer coating structure of Ta-C film had stronger corrosion resistance;with more than 50%sp^(3) content,while it also had larger water contact angle and higher corrosion resistance than DLC film.The filtered arcing deposition technology was able to make the film to be more consistent and stable than normal arcing technology in terms of the preparation of Ta-C.The coating displayed corrosion density of 1.26×10^(−7) A·cm^(−2) and ICR of less than 5 mΩ·cm^(2),far beyond technical target of 2025 DOE(US Department of Energy).This indicated that the mass-production scale coating technology for PEMFC bipolar plates is highly possible.
基金supported by the National Natural Science Foundation of China (Grant Nos.U2341244,12172179,11772160)。
文摘This study presents a theoretical analysis of the perforation process of finite-thickness metal plates(with a thickness ratio of T_0/D = 0.6–1.5) under normal impact by spherical-nosed projectiles. The model is validated over an impact velocity range of 180–1247 m/s. The entire penetration process is divided into three stages: the crater formation stage, the steady stage, and the shear stage. A thicknessdependent dynamic cavity expansion resistance model is first introduced to quantitatively describe the axial resistance experienced by the projectile during the tip-entry and steady stages. Subsequently, a thickness-related damage parameter is proposed to refine the resistance expression during the transition from the steady stage to the shear stage, thereby eliminating discontinuities in resistance across stages. When the projectile fully perforates the target, the model predicts a gradual decay of resistance to zero as the residual ligament thickness vanishes, which better reflects the actual physical behavior. The model is validated using four sets of experimental conditions. In addition, to illustrate the model's applicability more intuitively, a numerical simulation case from the literature is reproduced, and the resulting resistance-time curve is compared with the model output. The results demonstrate that the proposed model agrees well with experimental data in terms of residual velocity, ballistic limit, and penetration resistance. Finally, a method for adjusting the threshold parameter within the resistance function is provided, and the influence of this coefficient on the model predictions is discussed.
基金supported by Natural Science Foundation of Fujian Province(2022I0019)Scientific Research Foundation for Jimei University(ZQ2024041,ZQ2024042).
文摘The penetration of ogival-nosed projectiles into ship plates represents a complex impact dynamics issue essential for analyzing structural failuremechanisms.Although stiffenedplates are vital in ship construction,fewstudies have addressed the issue of model equivalence under penetration loading.This study employs numerical simulation to validate an experiment with an ogival-nosed projectile penetrating a Q345 steel plate.Four equivalent stiffened plate methods are proposed based on the area,flexural modulus,moment of inertia,and thickness.The results indicate that thickness equivalence(DM4)is unsuitable for penetration-loaded stiffened plates,except under low-speed,nonpenetrating through impacts,and yields less accuracy than DM1/DM3.DM1,DM2,and DM3 each perform optimally with specific velocity ranges:DM1 at very low(critical)and high velocities,DM3 at low velocities,and DM2 at high speeds.Furthermore,in penetration scenarios,T-shaped stiffeners can be replacedwith rectangular ones,as both exhibit similar failure behaviors and deflection trends,simplifying the design while preserving key structural characteristics.These findings provide valuable insights into the design of protective ship structures.
基金supported by the National Natural Science Foundation of China under Grant Nos.12102310 and U21A20113the Guangdong Basic and Applied Basic Research Foundation under Grant No.2020A1515110818+2 种基金the Inovation Team Project for Colleges and Universities of Guangdong Province under Grant No.2023KCXTD030the Key Project of Biomedicine and Health in Colleges and Universities of Guangdong Province under Grant No.2021ZDZX2055the Medical Science and Technology Research Fund of Guangdong Province under Grant No.A2022004.
文摘Proton exchange membrane fuel cells(PEMFCs)have gained increasing interests as promising power sources due to their ability to convert hydrogen and oxygen directly into electricity with high efficiency and zero greenhouse gas emissions.Bipolar plates(BPs)are considered as a critical component of PEMFCs,serving to collect current,separate gases,distribute the flow field,and conduct heat.This paper reviews the technical status and advancements in BP materials,with special focus on strategies for enhancing interfacial contact resistance(ICR)and corrosion resistance through conductive polymer(CP)coatings.First,commonly used BP materials in PEMFCs are summarized.Then,the advantages and limitations of various coatings for metallic BPs are discussed.Finally,recent progress in CP coatings for metallic BPs,aimed at achieving high corrosion resistance and low ICR,is comprehensively reviewed.
基金supported by the Nano&Material Technology Development Program through the National R&D Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(RS-202300260461).
文摘Bipolar plates(BPs)are essential multifunctional components in vanadium redox flow batteries(VRFBs)that require excellent electrical conductivity,low permeability,and strong solid support for the stack.However,conventional BPs are based on graphite sheets,which provide mechanical properties and corrosion resistance but have limitations in terms of electrical conductivity.Although carbon nanotubes(CNTs)have excellent properties,CNT composites with low CNT volume fractions(10–20%)have increased electrolyte permeability and limited electrical conductivity improvement,resulting in low durability and efficiency for VRFBs.This study proposes a novel concept of horizontally aligned CNT nanocomposite bipolar plate(HACN-BP)to address these issues.The HACN-BPs feature an optimized conduction path with a CNT volume fraction of 59%,resulting in reduced manufacturing time while demonstrating superior conductivity and permeability compared to conventional BPs.Furthermore,integrated HACN-BP mitigates ohmic loss that occurs in the BPs,thereby mitigating the potential drop by 40%.Therefore,the utilization of HACN-BP shows superior performance compared to recent studies,a substantial improvement of more than 6%in energy efficiency and 14%in capacity over conventional BP.
基金supported by the National Natural Science Foundation of China(Grant Nos.12302006,12132002,and 62188101).
文摘A lightweight composite resonator,consisting of a soft material acoustic black hole(SABH)and multiple vibration absorbers,is embedded in a plate to achieve localization and absorption of low-frequency vibration energy.The combination of local and global admissible functions for displacement enhances the accuracy of the Ritz method in predicting vibration localization characteristics within the SABH domain.Utilizing soft materials for the SABH can reduce the mass and frequency of the composite resonator.Due to the lack of orthogonality between global vibration modes and localized modes,the low-frequency localized modes induced by the SABH are used to shape the initial global modes,thereby concentrating the global vibration of the plate in the SABH region.Consequently,the absorbers of the composite resonator only need to be a small fraction of the mass of the local SABH to achieve substantial vibration control of the host plate.This vibration localization strategy can significantly reduce the vibration amplitude of the host plate and enhance the effectiveness of lightweight absorbers in vibration reduction.
基金supported by the Research Start-Up Fund for Introducing Talents from Anhui Polytechnic University(S022023032)the Program for Synergy Innovation in the Anhui Higher Education Institutions of China(GXXT-2021-044 and GXXT-2022-082)+2 种基金the Scientific Research Foundation of Education Department of Anhui Province,China(2022AH040361)the National Natural Science Foundation of China(12172114)the Natural Science Funds for Distinguished Young Scholar of Anhui Province of China(2208085J25).
文摘This paper studies the vibration responses of porous functionally graded(FG)thin plates with four various types of porous distribution based on the physical neutral plane by employing the peridynamic differential operator(PDDO).It is assumed that density and elastic modulus continuously vary along the transverse direction following the power law distribution for porous FG plates.The governing differential equation of free vibration for a porous rectangular FG plate and its associated boundary conditions are expressed by a Lévy-type solution based on nonlinear von Karman plate theory.Dimensionless frequencies and mode shapes are obtained after solving the characteristic equations established by PDDO.The results of the current method are validated through comparison with existing literature.The effects of geometric parameters,material properties,elastic foundation,porosity distribution,and boundary conditions on the frequency are investigated and discussed in detail.The highest fundamental dimensionless frequency occurs under SCSC boundary conditions,while the lowest is under SFSF boundary conditions.The porous FG plate with the fourth pore type,featuring high density of porosity at the top and low at the bottom,exhibits the highest fundamental frequency under SSSS,SFSF,and SCSC boundary conditions.The dimensionless frequency increases with an increase in the elastic foundation stiffness coefficient.
基金Project supported by the National Natural Science Foundation of China(Nos.U21A20430 and 12302202)the Hebei Natural Science Foundation of China(No.A2023210040)+1 种基金the Science and Technology Project of Hebei Education Department of China(No.BJ2025005)the Hebei Provincial Department of Human Resources and Social Security of China(No.C20220324)。
文摘In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formalism and dual-variable and position(DVP)method,the general solution of the coupled fields for the Lamb wave is derived,and then the dispersion equation is obtained by the application of the boundary conditions.First,the influence of semiconducting properties on the dispersion behavior of the Lamb wave in a single-layer PSC plate is analyzed.Then,the propagation characteristics of the Lamb wave in a sandwich plate are investigated in detail.The numerical results show that the wave speed and attenuation depend on the stacking sequence,layer thickness,and initial carrier density,the Lamb wave can propagate without a cut-off frequency in both the homogeneous and multilayer PSC plates due to the semiconducting properties,and the Lamb wave without attenuation can be achieved by carefully selecting the semiconductor property in the upper and lower layers.These new features could be very helpful as theoretical guidance for the design and performance optimization of PSC devices.
基金supported by the National Key Research and Development Program of China(2022YFB3708400)the Guangdong Major Project of Basic and Applied Basic Research(2020B0301030006)+4 种基金the Youth Talent Support Programme of Guangdong Provincial Association for Science and Technology(SKXRC202301)the Guangdong Academy of Science Fund(2020GDASYL-20200101001,2023GDASQNRC-0210,2023GDASQNRC-0321)the Guangdong Science and Technology plan project(2023A0505030002)the GINM’Special Project of Science and Technology Development(2023GINMZX-202301020108)Evaluation Project of Guangdong Provincial Key Laboratory(2023B1212060043).
文摘In this study,microstructure and mechanical behavior of Mg/Al composite plates with Ti foil interlayer were systematically studied,with a great emphasis on the effect of different thicknesses of Ti foil interlayer.The results show that compared to 100μm thick Ti foil,10μm thick Ti foil is more prone to fracture and is evenly distributed in fragments at the interface.The introduction of Ti foil can effectively refine the grain size of Mg layers of as-rolled Mg/Al composite plates,10μm thick Ti foil has a better refining effect than 100μm thick Ti foil.Ti foil can effectively increase the yield strength(YS)and ultimate strength(UTS)of as-rolled Mg/Al composite plates,10μm thick Ti foil significantly improves the elongation(El)of Mg/Al composite plate,while 100μm thick Ti foil slightly weakens the El.After annealing at 420℃ for 0.5 h and 4 h,Ti foil can inhibit the formation of intermetallic compounds(IMCs)at the interface of Mg/Al composite plates,which effectively improves the YS,UTS and El of Mg/Al composite plates.In addition,Ti foil can also significantly enhance the interfacial shear strength(SS)of Mg/Al composite plates before and after annealing.
基金supported by the National Natural Science Foundation of China(No.52206271)Guangxi Science and Technology Major Program(GK-AA23062070)+2 种基金the National Natural Science Foundation of China(No.52306266)the Key Project of Natural Science Funds of Tianjin City(No.24JCZDJC01060)funded by the Key Laboratory of Shallow Geothermal Energy,Ministry of Natural Resources of the People’s Republic of China(No.KLSGE202401-04).
文摘Liquid cooling through a cold plate offers an efficient solution for battery thermal management.Excellent flow and heat transfer performance can be obtained by optimizing the flow channel structure of the cold plate using the topology optimization method.However,due to the uneven channel width of the optimized cold plate,there are some difficulties in processing,which affect its practical application in battery thermal management.In this study,the length scale control method is applied to a topology-optimized cold plate.An optimized cold plate considering length scale control is designed and processed,and its experimental results of flow and heat transfer are compared with those of a traditional cold plate and an optimized cold plate without length scale control.Results show that the relative deviations between the numerical and experimental results with length scale control are within 5%and 8%for temperature and pressure drop,respectively.The flow channel structure of the cold plate with length scale control is simpler and easier to process than that of the cold plate without length scale control.When the inlet velocity is 0.23 m/s,the maximum temperature,maximum temperature difference,and pressure drop of the cold plate with length scale control are 5.7 K,4.4 K,and 0.56 Pa lower than those of the traditional cold plate,respectively.This study provides valuable insights and practical guidance for the manufacturing and implementation of topology-optimized cold plates in battery thermal management systems.
