Many properties of Mg matrix composites are mutually incompatible,and even completely repel each other.Here,we constructed a magnetic layered component in Mg matrix composite reinforced with reduced graphene oxide(RGO...Many properties of Mg matrix composites are mutually incompatible,and even completely repel each other.Here,we constructed a magnetic layered component in Mg matrix composite reinforced with reduced graphene oxide(RGO)through an in-situ interface reaction strategy,achieving simultaneous improvement in the strength,ductility,and electromagnetic shielding performance of the composite.The magnetic component is generated by the in-situ reaction of Fe_(2)O_(3)nanoparticles encapsulated on RGO with the Mg matrix.The superior strength-ductility synergy originates from layered heterostructure,which actives non-basal dislocations and enables a stable microcrackmultiplication.The heterogeneous layered structure strengthens the multi-level reflection of electromagnetic wave(EMW)inside the composite.The in-situ interfacial reaction introduces abundant of heterogeneous interfaces into the composites,which improves the interfacial polarization loss ability of the composites.The magnetic RGO layer can provide shape anisotropy that breaks the Snoek limit,thus improving the magnetic loss ability of composite in high-frequency electromagnetic fields.The synergistic action of multiple EMW loss mechanisms improves the electromagnetic shielding performance of composite.The current study emphasizes the influence of interface structure on the mechanical and functional properties of composites,and presents a promising approach for the development of structure/functional integrated composites with enhanced properties.展开更多
This study focuses on steeply inclined and extremely thick coal seams(SIETCS)characterized by immense thickness,a steep inclination of coal seams(87°),and high horizontal stress.The geological conditions and mini...This study focuses on steeply inclined and extremely thick coal seams(SIETCS)characterized by immense thickness,a steep inclination of coal seams(87°),and high horizontal stress.The geological conditions and mining technology associated with SIETCS differ significantly from those of generally inclined coal seams,resulting in notable variations in roadway stress distributions.On SIETCS have predominantly examined the impact of rock layers flanking coal seams on rock bursts,with limited emphasis on SIETCS roadways.This study employs comprehensive methods,integrating numerical simulations,theoretical analyses,and field detections to investigate the stress distribution of SIETCS and the mechanisms of rock burst-induced vertical damage,subsequently validated in situ.The vertical stress in SIETCS is minimal,while horizontal stress is concentrated,leading to the formation of layered crack structures(LCS)that distribute above and below the roadways.Additionally,elastic energy significantly concentrates within the LCS.Axial dynamic compressive stress and vertical dynamic tensile stress along the LCS diminish its stability,readily triggering failure.During the LCS failure process,the stored energy is released,converting into kinetic energy required for coal body ejection after reaching the minimum energy for failure and dissipative energy,ultimately leading to rock burst-induced vertical damage in roadways.On-site detection and analysis within SIETCS,along with historical rock burst data,confirm the existence of LCS and its role in inducing vertical rock burst damage.This research establishes essential foundations for preventing rock bursts within SIETCS.展开更多
This paper theoretically investigates the influence of a cylindrical PN junction on the propagation characteristics of shear cylindrical waves(SCWs)in an infinitely long piezoelectric semiconductor(PS)concentric cylin...This paper theoretically investigates the influence of a cylindrical PN junction on the propagation characteristics of shear cylindrical waves(SCWs)in an infinitely long piezoelectric semiconductor(PS)concentric cylinder structure.This PS concentric cylinder structure is composed of three regions:an inner PS cylinder,an outer PS cylindrical shell,and a cylindrical PN junction at the interface between the two aforementioned regions.First,the basic equations of the PS concentric cylinder structure are derived,taking into account the coupling of the mechanical displacement,electric potential,and charge carrier perturbation in the cylindrical coordinate system.Next,a mathematical model for the SCWs in this PS concentric cylinder structure is established,utilizing the spectral method and considering the physical characteristics of the cylindrical PN junction.Finally,the dispersion and attenuation curves of the SCWs are numerically calculated to discuss the influence of the interface effect resulting from the cylindrical PN junction.It is found that the existence of a cylindrical PN junction can either reduce or enhance the mechanical-to-electrical energy conversion,which is closely related to the doping mode,doping concentration,and curvature radius of the cylindrical interface.A reasonable design of the aforementioned parameters can optimize the wave motion in acoustic equipment formed by PS media with different frequencies or wavelengths.The construction and resolution of the mathematical model as well as the analysis of physical mechanisms can offer theoretical guidance for improving the efficiency of energy conversion from mechanical energy to electrical energy and optimizing the acoustic performance of energy harvesting devices.展开更多
Multi-layer riveted structures are widely applied to aircraft.During the service,cracks may appear within these structures due to stress concentration of the riveted holes.The guided wave monitoring has been proved to...Multi-layer riveted structures are widely applied to aircraft.During the service,cracks may appear within these structures due to stress concentration of the riveted holes.The guided wave monitoring has been proved to be an effective tool to deal with this problem.However,there is a lack of understanding of the wave propagation process across such kinds of structures.This study proposes a piezoelectric guided wave simulation method to reveal the propagation of guided waves in multi-layer riveted structures.Effects of pretension force,friction coefficient,and cracks that might influence wave characteristics are studied.The guided wave simulation data is compared with the experimental results and the results verify the simulation model.Then the guided wave propagation in a more complex long-beam butt joint structure is further simulated.展开更多
Immiscible Cu-W alloy thin films were prepared using dual-target magnetron sputtering deposition process. The structure evolution of Cu-W thin films during preparation was investigated by X-ray diffraction, transmissi...Immiscible Cu-W alloy thin films were prepared using dual-target magnetron sputtering deposition process. The structure evolution of Cu-W thin films during preparation was investigated by X-ray diffraction, transmission electron microscopy and high resolution transmission electron microscopy. In the initial stage of dual-target magnetron sputtering deposition process, an amorphous phase formed; then it crystallized and the analogy spinodal structure formed due to the bombardment of the sputtered particles during sputtering deposition process, the surface structure of the film without the bombardment of the sputtered particles was the amorphous one, the distribution of the crystalline and amorphous phase showed layer structure. The solid solubility with the analogy spinodal structure was calculated using the Vegard law. For Cu-13.7%W （mole fraction） film, its structure was composed of Cu-ll%W solution, Cu-37%W solution and pure Cu; for Cu 14.3%W film, it was composed of Cu-15%W solution, Cu-38%W solution, and pure Cu; for Cu-18.1%W film, it was composed of Cu-19%W solution, Cu-36% W solution and pure Cu.展开更多
The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction ...The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.展开更多
Using boundary layer data with regard to sea fog observed at the Science Experiment Base for Marine Meteorology at Bohe,Guangdong Province,the structure of the atmospheric boundary layer and the characteristics of the...Using boundary layer data with regard to sea fog observed at the Science Experiment Base for Marine Meteorology at Bohe,Guangdong Province,the structure of the atmospheric boundary layer and the characteristics of the tops of the fog and the clouds were analyzed.In addition,the effects of advection,radiation,and turbulence during sea fog were also investigated.According to the stability definition of saturated,wet air,the gradient of the potential pseudo-equivalent temperature equal to zero was defined as the thermal turbulence interface.There is evidence to suggest that two layers of turbulence exist in sea fog.Thermal turbulence produced by long-wave radiation is prevalent above the thermal turbulence interface,whereas mechanical turbulence aroused by wind shear is predominant below the interface.The height of the thermal turbulence interface was observed between 180 m and 380 m.Three important factors are closely related to the development of the top of the sea fog：（1） the horizontal advection of the water vapor,（2） the long-wave radiation of the fog top,and（3） the movement of the vertical turbulence.Formation,development,and dissipation are the three possible phases of the evolution of the boundary-layer structure during the sea fog season.In addition,the thermal turbulence interface is the most significant turbulence interface during the formation and development periods;it is maintained after sea fog rises into the stratus layer.展开更多
Isotropic magnets were prepared from melt-spun powders at different hot pressing temperatures from 550 to 700 ℃, then upset into fully dense anisotropic magnets at the same die-upsetting temperature of 850 ℃. Die-up...Isotropic magnets were prepared from melt-spun powders at different hot pressing temperatures from 550 to 700 ℃, then upset into fully dense anisotropic magnets at the same die-upsetting temperature of 850 ℃. Die-upset magnets had the characteristics of inhomogeneous microstructure, including well-aligned grains structure and nonaligned grains layers transverse to press direction, which was quasi-periodic layer structure with a total length of 5-15 μm. Nonaligned grains layers were mainly made of large grains and had higher Nd content. To clearly understand the formation of layer structure, the microstructure of isotropic precursors with different hot pressing temperatures and their subsequent die-upset magnets was investigated. A new interpretation for the formation of layer structure was proposed in this paper： the layer structure was correlated to the original ribbon interface which was divided into three types based on the contact forms. Because of the incomplete contact of neighboring ribbons, concentration of stress occurred in the contacted points and the Nd-rich phase was squeezed into interspaces at high temperature under stress. Due to the release of interfacial energy and the fluidity of enough Nd-rich liquid phases, the nonaligned layers with large grains formed both in hot compaction and subsequent hot deformation process. The layer structure affected the magnetic properties of die-upset magnets. With increase of the hot pressing temperature, the nonaligned grains layers became thicker, and the magnetic performance of die-upset magnets decreased. It was necessary to reduce the thickness of large grains layers for the preparation of high-performance die-upset magnets.展开更多
Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are c...Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are considered. The transfer matrices between two consecutive unit cells are obtained according to the continuity conditions. The expressions of localization factor and localization length in the disordered periodic structures are presented. For the disordered periodic piezoelectric structures, the numerical results of localization factor and localization length are presented and discussed. It can be seen from the results that the frequency passbands and stopbands appear for the ordered periodic structures and the wave localization phenomenon occurs in the disordered periodic ones, and the larger the coefficient of variation is, the greater the degree of wave localization is. The widths of stopbands in the ordered periodic structures are very narrow when the properties of the consecutive piezoelectric materials are similar and the intervals of stopbands become broader when a certain material parameter has large changes. For the wave propagating in the direction normal to the layers the localization length has less dependence on the frequency, but for the wave propagating in the direction tangential to the layers the localization length is strongly dependent on the frequency.展开更多
Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar j...Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar joint,which determines the performance of the welded structure.In the present study,appropriate filler material was used during electron beam welding(EBW)to obtain a reliable dissimilar joint between reduced-activation ferritic-martensitic(RAFM)steel and 316L austenitic stainless steel.It was observed that the layered structure occurred in the weld metal with 310S filler(310S-WM),which had the inferior resistance to thermal disturbance,leading to severe hardening of 310S-WM after one-step tempering treatment.To further ameliorate the joint inhomogeneity,two-step heat treatment processes were imposed to the joints and optimized.δ-ferrite in the layered structure transformed intoγ-phase in the first-step normalizing and remained stable during cooling.In the second-step of tempering,tempered martensite was obtained in the HAZ of the RAFM steel,while the microstructure of 310S-WM was not affected.Thus,the optimized properties for HAZ and 310S-WM in dissimilar welded joint was both obtained by a two-step heat treatment.The creep failure position of two dissimilar joints both occurred in CLAM-BM.展开更多
This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The exp...This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The explicit dispersion relations are derived for the two cases when the propagation directions of SH waves are normal to the interface and parallel to the interface, respectively. The asymptotic expressions for dispersion relations are also given when the wave number is extremely small. Numerical results for stop band effect and phase velocity are presented for a periodic system of alternating BaTiO3 and Terfenol-D layers. The influence of volume fraction on stop band effect and dispersion behaviors is discussed and revealed.展开更多
It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites incl...It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.展开更多
The transient fracture behavior of a functionally graded layered structure subjected to an in-plane impact load is investigated. The studied structure is composed of two homogeneous layers and a functionally gradedint...The transient fracture behavior of a functionally graded layered structure subjected to an in-plane impact load is investigated. The studied structure is composed of two homogeneous layers and a functionally gradedinterlayer with a crack perpendicular to the boundaries. The impact load is applied on the face of the crack. Fourier transform and Laplace transform methods are used to formulate the present problem in terms of a singular integral equation in Laplace transform domain. Considering variations of parameters such as the nonhomogeneity constant, the thickness ratio and the crack length, the dynamic stress intensity factors （DSIFs） in time domain are studied and some meaningful conclusions are obtained.展开更多
The Al0.3CoCrFeNi high-entropy alloy(HEA)particles reinforced Cu matrix composites(CMCs)were fabricated by mechanical alloying and sintering.Transition layer structure was obtained by multi-step ball milling to invest...The Al0.3CoCrFeNi high-entropy alloy(HEA)particles reinforced Cu matrix composites(CMCs)were fabricated by mechanical alloying and sintering.Transition layer structure was obtained by multi-step ball milling to investigate the related influence on element diffusion behavior and wear properties of CMCs.The results indicate that a new Cu transition layer is generated,and the thickness is about 5μm.Cr element diffuses into the interface via the transition layer,which forms the complex oxide.Because of the structure of Cu transition layer,the diffusion rates of Ni,Co and Fe increase,especially the Ni element.The wear resistance of CMCs is improved by 30%,which is due to the improvement of interface bonding strength,compared with the CMCs without transition layer.This method is applicable to the development of advanced HEA reinforced metallic matrix composites.展开更多
The effect of ultrasonic surface rolling process(USRP) as a severe plastic deformation technology was investigated on the evolution of microstructure, residual stress and surface morphology of TB8 alloys with body-cen...The effect of ultrasonic surface rolling process(USRP) as a severe plastic deformation technology was investigated on the evolution of microstructure, residual stress and surface morphology of TB8 alloys with body-centered cubic structure. Stress-controlled rotating-bending fatigue tests indicated increased fatigue strength in USRP samples prepared using different number of passes compared to the base material, which was attributed to the presence of gradient structure surface layers. Five subsequent USRP passes resulted in the highest fatigue strength, due to the optimal surface properties including higher extent of grain refinement, larger compressive residual stresses, "smoother" surface morphology and increased micro-hardness. However, the effect of USRP technology on improving fatigue strength of TB8 alloy was not significant in comparison with that of other titanium alloys(for example, Ti6 Al4 V), which was attributed to the notable surface residual stresses relaxation revealed from measurements on postfatigued USRP samples. Electron backscatter diffraction analysis confirmed that fatigue crack initiation occurred in the larger grains on the surface with high Schmid factor. Small cracks were found to propagate into the core material in a mixed transgranular and intergranular mode. Further analysis indicated that grain growth existed in post-fatigued USRP-treated TB8 samples and that the average geometrically necessary dislocations value reduced after fatigue loading.展开更多
A new 3d-4f（CuⅡ-CeⅢ） hetero-metallic compound containing two kinds of ligands, namely [CuⅡ（H2pdc）（phen）（H2O）]（HⅢ3O）2[CeⅢ（pdc）3][CuⅡ（phen）Ce（pdc）3]（1, H2 pdc = pyridine-2,6-dicarboxylic acid, phe...A new 3d-4f（CuⅡ-CeⅢ） hetero-metallic compound containing two kinds of ligands, namely [CuⅡ（H2pdc）（phen）（H2O）]（HⅢ3O）2[CeⅢ（pdc）3][CuⅡ（phen）Ce（pdc）3]（1, H2 pdc = pyridine-2,6-dicarboxylic acid, phen = 1,10-phenanthroline）, has been synthesized by an ionothermal method using the ionic liquid 3-butyl-1-methylimidazolium bromide（[Bmim]Br） as solvent, and characterized by elemental analysis, energy-dispersive X-ray spectroscopy（EDS）, IR, XPS and single-crystal X-ray diffraction. The structure reveals that 1 belongs to the triclinic system, space group P1 with a = 12.044（7）, b = 14.841（8）, c = 22.305（13） A, α = 85.802（12）, β = 85.471（12）, γ = 89.174（11）°, Z = 2, V = 3964（4） A3, Dc = 1.804 g·cm-3, F（000） = 2140, μ = 1.757 mm-1, the final R = 0.0734, wR = 0.1094 and S = 1.013. The compound can be viewed as a two-dimensional layered structure composed by 3d-4f hetero-nuclear anions [Cu（phen）Ce（pdc）3]-, coordination cations [Cu（H2pdc）（phen）（H2O）]2＋, coordination anions [Ce（pdc）3]3- and protonated water molecules via hydrogen bonding interactions and π-π stacking. Moreover, the antimicrobial activities of 1 have been also investigated. The results indicated that its inhibitory activity is slightly higher than that of penicillin against Candida albicans.展开更多
The propagation of surface acoustic waves in layered piezoelectric structureswith initial stresses is investigated. The phase velocity equations are obtained for electricallyfree and shorted cases, respectively. Effec...The propagation of surface acoustic waves in layered piezoelectric structureswith initial stresses is investigated. The phase velocity equations are obtained for electricallyfree and shorted cases, respectively. Effects of the initial stresses on the phase velocity and theelectromechanical coupling coefficient for the fundamental mode of the layered piezoelectricstructures are discussed. Numerical results for the c-axis oriented film of LiNbO_3 on a sapphiresubstrate are given. It is found that the fractional change in phase velocity is a linear functionwith the initial stresses, and the electromechanical coupling factor increases with an increase ofthe absolute values of the compressive initial stresses. The results are useful for the design ofsurface acoustic wave devices.展开更多
The vertical structure of Planetary boundary layer over Arctic floating ice is presented by using about 50 atmospheric profiles and relevant data sounded at an ice station over Arctic Ocean from 22 August to 3 Septemb...The vertical structure of Planetary boundary layer over Arctic floating ice is presented by using about 50 atmospheric profiles and relevant data sounded at an ice station over Arctic Ocean from 22 August to 3 September,2003.It shows that the height of the convective boundary layer in day is greater than that of the stability boundary layer in night.The boundary layer can be described as vertical structures of stability,instability and multipling The interaction between relative warm and wet down draft air from up level and cool air of surface layer is significant,which causes stronger wind shear,temperature and humidity inversion with typical wind shear of 10 m/s/100 m,intensity of temperature inversion of 8 ℃/100 m.While the larger pack ice is broken by such process,new ice free area in the high latitudes of arctic ocean.The interactions between air/ice/water are enhanced.The fact helps to understanding characteristics of atmospheric boundary layer and its effect in Arctic floating ice region.展开更多
Fine-grained 01420 Al-Li alloy sheets were produced by thermo-mechanical processing based on the mechanism of particle stimulated nucleation of recrystallization.The thermo-mechanically processed sheets were observed ...Fine-grained 01420 Al-Li alloy sheets were produced by thermo-mechanical processing based on the mechanism of particle stimulated nucleation of recrystallization.The thermo-mechanically processed sheets were observed to contain layers of different microstructures along the thickness.The precipitate behavior of the second phase particles and their effects on the distribution of dislocations and layered recrystallized grain structure were analyzed by optical microscopy(OM),scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray diffractometry(XRD).The formation mechanism of the gradient particles was discussed.The results show that after aging,a gradient distribution of large particles along the thickness is observed,the particles in the surface layer(SL) are distributed homogeneously,whereas those in the center layer(CL) are mainly distributed parallel to the rolling direction,and the volume fraction of the particles in the SL is higher than that in the CL.Subsequent rolling in the presence of layer-distributed particles results in a corresponding homogeneous distribution of highly strained regions in the SL and a banded distribution of them in CL,which is the main reason for the formation of layered grain structure along the thickness in the sheets.展开更多
Hierarchical layered structures,whether in a compact form like nacre or a porous manner like bone,are well known for their combined features of high stiffness,strength,and lightweight,inspiring many man-made materials...Hierarchical layered structures,whether in a compact form like nacre or a porous manner like bone,are well known for their combined features of high stiffness,strength,and lightweight,inspiring many man-made materials and structures for high performance applications.The use of nacre/bone like hierarchical structures in polymer nanocomposites can achieve excellent mechanical and functional properties with high filler volume fractions after carefully aligning functional nanofillers,although the fabrication and processing remain a great challenge.In this work,a bio-inspired lightweight nano-cellular epoxy/graphene-Fe_(3)O_(4) nanocomposite with high nanofiller loading of 75 wt.%was successfully fabricated by combining features from both nacre and bone structures,via a simple compression molding process together with an eco-friendly supercritical CO_(2) foaming process to achieve robust mechanical strength and excellent electromagnetic interference(EMI)shielding effectiveness(SE)simultaneously.Highly aligned graphene-Fe_(3)O_(4) nanoplatelets with well controlled nanoscale porous structures(52.6 nm)enabled both low density(1.26 g/cm^(3))and high specific EMI SE>5200 dB/cm^(2)/g,as well as preserved tensile strength of 67 MPa.This study provides a sustainable route to fabricate nature mimicked structures with high performance and high flexibility for a wide range of applications,from portable electronics to healthcare devices.展开更多
基金supported by Yunnan Major Scientific and Technological Projects(grant No 202202AG050004,202202AG050011)the National Natural Science Foundation of China(grant No 52061021)Yunnan Industrial Technology Innovation Talent Project.
文摘Many properties of Mg matrix composites are mutually incompatible,and even completely repel each other.Here,we constructed a magnetic layered component in Mg matrix composite reinforced with reduced graphene oxide(RGO)through an in-situ interface reaction strategy,achieving simultaneous improvement in the strength,ductility,and electromagnetic shielding performance of the composite.The magnetic component is generated by the in-situ reaction of Fe_(2)O_(3)nanoparticles encapsulated on RGO with the Mg matrix.The superior strength-ductility synergy originates from layered heterostructure,which actives non-basal dislocations and enables a stable microcrackmultiplication.The heterogeneous layered structure strengthens the multi-level reflection of electromagnetic wave(EMW)inside the composite.The in-situ interfacial reaction introduces abundant of heterogeneous interfaces into the composites,which improves the interfacial polarization loss ability of the composites.The magnetic RGO layer can provide shape anisotropy that breaks the Snoek limit,thus improving the magnetic loss ability of composite in high-frequency electromagnetic fields.The synergistic action of multiple EMW loss mechanisms improves the electromagnetic shielding performance of composite.The current study emphasizes the influence of interface structure on the mechanical and functional properties of composites,and presents a promising approach for the development of structure/functional integrated composites with enhanced properties.
基金support of the National Natural Science Foundation of China(52374180,52327804).
文摘This study focuses on steeply inclined and extremely thick coal seams(SIETCS)characterized by immense thickness,a steep inclination of coal seams(87°),and high horizontal stress.The geological conditions and mining technology associated with SIETCS differ significantly from those of generally inclined coal seams,resulting in notable variations in roadway stress distributions.On SIETCS have predominantly examined the impact of rock layers flanking coal seams on rock bursts,with limited emphasis on SIETCS roadways.This study employs comprehensive methods,integrating numerical simulations,theoretical analyses,and field detections to investigate the stress distribution of SIETCS and the mechanisms of rock burst-induced vertical damage,subsequently validated in situ.The vertical stress in SIETCS is minimal,while horizontal stress is concentrated,leading to the formation of layered crack structures(LCS)that distribute above and below the roadways.Additionally,elastic energy significantly concentrates within the LCS.Axial dynamic compressive stress and vertical dynamic tensile stress along the LCS diminish its stability,readily triggering failure.During the LCS failure process,the stored energy is released,converting into kinetic energy required for coal body ejection after reaching the minimum energy for failure and dissipative energy,ultimately leading to rock burst-induced vertical damage in roadways.On-site detection and analysis within SIETCS,along with historical rock burst data,confirm the existence of LCS and its role in inducing vertical rock burst damage.This research establishes essential foundations for preventing rock bursts within SIETCS.
基金Project supported by the National Natural Science Foundation of China(Nos.12202039,52204085,and 52474123)。
文摘This paper theoretically investigates the influence of a cylindrical PN junction on the propagation characteristics of shear cylindrical waves(SCWs)in an infinitely long piezoelectric semiconductor(PS)concentric cylinder structure.This PS concentric cylinder structure is composed of three regions:an inner PS cylinder,an outer PS cylindrical shell,and a cylindrical PN junction at the interface between the two aforementioned regions.First,the basic equations of the PS concentric cylinder structure are derived,taking into account the coupling of the mechanical displacement,electric potential,and charge carrier perturbation in the cylindrical coordinate system.Next,a mathematical model for the SCWs in this PS concentric cylinder structure is established,utilizing the spectral method and considering the physical characteristics of the cylindrical PN junction.Finally,the dispersion and attenuation curves of the SCWs are numerically calculated to discuss the influence of the interface effect resulting from the cylindrical PN junction.It is found that the existence of a cylindrical PN junction can either reduce or enhance the mechanical-to-electrical energy conversion,which is closely related to the doping mode,doping concentration,and curvature radius of the cylindrical interface.A reasonable design of the aforementioned parameters can optimize the wave motion in acoustic equipment formed by PS media with different frequencies or wavelengths.The construction and resolution of the mathematical model as well as the analysis of physical mechanisms can offer theoretical guidance for improving the efficiency of energy conversion from mechanical energy to electrical energy and optimizing the acoustic performance of energy harvesting devices.
文摘Multi-layer riveted structures are widely applied to aircraft.During the service,cracks may appear within these structures due to stress concentration of the riveted holes.The guided wave monitoring has been proved to be an effective tool to deal with this problem.However,there is a lack of understanding of the wave propagation process across such kinds of structures.This study proposes a piezoelectric guided wave simulation method to reveal the propagation of guided waves in multi-layer riveted structures.Effects of pretension force,friction coefficient,and cracks that might influence wave characteristics are studied.The guided wave simulation data is compared with the experimental results and the results verify the simulation model.Then the guided wave propagation in a more complex long-beam butt joint structure is further simulated.
文摘Immiscible Cu-W alloy thin films were prepared using dual-target magnetron sputtering deposition process. The structure evolution of Cu-W thin films during preparation was investigated by X-ray diffraction, transmission electron microscopy and high resolution transmission electron microscopy. In the initial stage of dual-target magnetron sputtering deposition process, an amorphous phase formed; then it crystallized and the analogy spinodal structure formed due to the bombardment of the sputtered particles during sputtering deposition process, the surface structure of the film without the bombardment of the sputtered particles was the amorphous one, the distribution of the crystalline and amorphous phase showed layer structure. The solid solubility with the analogy spinodal structure was calculated using the Vegard law. For Cu-13.7%W （mole fraction） film, its structure was composed of Cu-ll%W solution, Cu-37%W solution and pure Cu; for Cu 14.3%W film, it was composed of Cu-15%W solution, Cu-38%W solution, and pure Cu; for Cu-18.1%W film, it was composed of Cu-19%W solution, Cu-36% W solution and pure Cu.
基金Projects(51271040,51171031)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.
基金sponsored jointly by the Chinese Special Scientific Research Project for Public Interest (Grant No. GYHY200906008)the National Natural Science Foundation of China (Grant No.40675013)+1 种基金the Science and Technology Project of Guangdong Province (Grant No. 2008B030303072)the Meteorological Sciences Research Project of the Weather Bu-reau of Guangdong Province (Grant No. 201003)
文摘Using boundary layer data with regard to sea fog observed at the Science Experiment Base for Marine Meteorology at Bohe,Guangdong Province,the structure of the atmospheric boundary layer and the characteristics of the tops of the fog and the clouds were analyzed.In addition,the effects of advection,radiation,and turbulence during sea fog were also investigated.According to the stability definition of saturated,wet air,the gradient of the potential pseudo-equivalent temperature equal to zero was defined as the thermal turbulence interface.There is evidence to suggest that two layers of turbulence exist in sea fog.Thermal turbulence produced by long-wave radiation is prevalent above the thermal turbulence interface,whereas mechanical turbulence aroused by wind shear is predominant below the interface.The height of the thermal turbulence interface was observed between 180 m and 380 m.Three important factors are closely related to the development of the top of the sea fog：（1） the horizontal advection of the water vapor,（2） the long-wave radiation of the fog top,and（3） the movement of the vertical turbulence.Formation,development,and dissipation are the three possible phases of the evolution of the boundary-layer structure during the sea fog season.In addition,the thermal turbulence interface is the most significant turbulence interface during the formation and development periods;it is maintained after sea fog rises into the stratus layer.
基金Project supported by National High-Tech R&D Program of China(2010AA03A401)the National Natural Science Foundation of China(50931001,51241009)
文摘Isotropic magnets were prepared from melt-spun powders at different hot pressing temperatures from 550 to 700 ℃, then upset into fully dense anisotropic magnets at the same die-upsetting temperature of 850 ℃. Die-upset magnets had the characteristics of inhomogeneous microstructure, including well-aligned grains structure and nonaligned grains layers transverse to press direction, which was quasi-periodic layer structure with a total length of 5-15 μm. Nonaligned grains layers were mainly made of large grains and had higher Nd content. To clearly understand the formation of layer structure, the microstructure of isotropic precursors with different hot pressing temperatures and their subsequent die-upset magnets was investigated. A new interpretation for the formation of layer structure was proposed in this paper： the layer structure was correlated to the original ribbon interface which was divided into three types based on the contact forms. Because of the incomplete contact of neighboring ribbons, concentration of stress occurred in the contacted points and the Nd-rich phase was squeezed into interspaces at high temperature under stress. Due to the release of interfacial energy and the fluidity of enough Nd-rich liquid phases, the nonaligned layers with large grains formed both in hot compaction and subsequent hot deformation process. The layer structure affected the magnetic properties of die-upset magnets. With increase of the hot pressing temperature, the nonaligned grains layers became thicker, and the magnetic performance of die-upset magnets decreased. It was necessary to reduce the thickness of large grains layers for the preparation of high-performance die-upset magnets.
基金The project supported by National Natural Science Foundation of China (10632020, 10672017 and 20451057)
文摘Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are considered. The transfer matrices between two consecutive unit cells are obtained according to the continuity conditions. The expressions of localization factor and localization length in the disordered periodic structures are presented. For the disordered periodic piezoelectric structures, the numerical results of localization factor and localization length are presented and discussed. It can be seen from the results that the frequency passbands and stopbands appear for the ordered periodic structures and the wave localization phenomenon occurs in the disordered periodic ones, and the larger the coefficient of variation is, the greater the degree of wave localization is. The widths of stopbands in the ordered periodic structures are very narrow when the properties of the consecutive piezoelectric materials are similar and the intervals of stopbands become broader when a certain material parameter has large changes. For the wave propagating in the direction normal to the layers the localization length has less dependence on the frequency, but for the wave propagating in the direction tangential to the layers the localization length is strongly dependent on the frequency.
基金supported financially by the National Magnetic Confinement Fusion Program of China (Nos.2014GB120000 and2014GB104003)the National Natural Science Foundation of China (No.51571026)
文摘Dissimilar high-energy beam(HEB)welding is necessary in many industrial applications.Different composition of heat-affected zone(HAZ)and weld metal(WM)lead to variation in mechanical properties within the dissimilar joint,which determines the performance of the welded structure.In the present study,appropriate filler material was used during electron beam welding(EBW)to obtain a reliable dissimilar joint between reduced-activation ferritic-martensitic(RAFM)steel and 316L austenitic stainless steel.It was observed that the layered structure occurred in the weld metal with 310S filler(310S-WM),which had the inferior resistance to thermal disturbance,leading to severe hardening of 310S-WM after one-step tempering treatment.To further ameliorate the joint inhomogeneity,two-step heat treatment processes were imposed to the joints and optimized.δ-ferrite in the layered structure transformed intoγ-phase in the first-step normalizing and remained stable during cooling.In the second-step of tempering,tempered martensite was obtained in the HAZ of the RAFM steel,while the microstructure of 310S-WM was not affected.Thus,the optimized properties for HAZ and 310S-WM in dissimilar welded joint was both obtained by a two-step heat treatment.The creep failure position of two dissimilar joints both occurred in CLAM-BM.
基金supported by the National Natural Science Foundation of China (Nos.10672108,10572069 and 10820101048)
文摘This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The explicit dispersion relations are derived for the two cases when the propagation directions of SH waves are normal to the interface and parallel to the interface, respectively. The asymptotic expressions for dispersion relations are also given when the wave number is extremely small. Numerical results for stop band effect and phase velocity are presented for a periodic system of alternating BaTiO3 and Terfenol-D layers. The influence of volume fraction on stop band effect and dispersion behaviors is discussed and revealed.
基金supported by the Guangdong Basic and Applied Basic Research Foundation (2020B1515120013,2022B1515120066)National Natural Science Foundation of China (Nos.U2001218, 51875215)+1 种基金Key-Area Research and Development Program of Guangdong Province (2020B090923001)Special Support Foundation of Guangdong Province (No.2019TQ05Z110)。
文摘It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.
基金the National Science Foundation for Excellent Young Investigators(10325208)the National Natural Science Foundation of China(10432030)the China Postdoctoral Science Foundation(2004036018)
文摘The transient fracture behavior of a functionally graded layered structure subjected to an in-plane impact load is investigated. The studied structure is composed of two homogeneous layers and a functionally gradedinterlayer with a crack perpendicular to the boundaries. The impact load is applied on the face of the crack. Fourier transform and Laplace transform methods are used to formulate the present problem in terms of a singular integral equation in Laplace transform domain. Considering variations of parameters such as the nonhomogeneity constant, the thickness ratio and the crack length, the dynamic stress intensity factors （DSIFs） in time domain are studied and some meaningful conclusions are obtained.
基金Projects(51701061,51705129) supported by the National Natural Science Foundation of ChinaProject(17391001D) supported by the Department of Science and Technology of Hebei Province,ChinaProject(2017-Z02) supported by the State Key Lab of Advanced Metals and Materials,China
文摘The Al0.3CoCrFeNi high-entropy alloy(HEA)particles reinforced Cu matrix composites(CMCs)were fabricated by mechanical alloying and sintering.Transition layer structure was obtained by multi-step ball milling to investigate the related influence on element diffusion behavior and wear properties of CMCs.The results indicate that a new Cu transition layer is generated,and the thickness is about 5μm.Cr element diffuses into the interface via the transition layer,which forms the complex oxide.Because of the structure of Cu transition layer,the diffusion rates of Ni,Co and Fe increase,especially the Ni element.The wear resistance of CMCs is improved by 30%,which is due to the improvement of interface bonding strength,compared with the CMCs without transition layer.This method is applicable to the development of advanced HEA reinforced metallic matrix composites.
基金the support of National Natural Science Foundation of China(51771155)National Science and Technology Major Project(2017-VII-0012-0107)Equipment Pre-research Field Fund(61409220202)。
文摘The effect of ultrasonic surface rolling process(USRP) as a severe plastic deformation technology was investigated on the evolution of microstructure, residual stress and surface morphology of TB8 alloys with body-centered cubic structure. Stress-controlled rotating-bending fatigue tests indicated increased fatigue strength in USRP samples prepared using different number of passes compared to the base material, which was attributed to the presence of gradient structure surface layers. Five subsequent USRP passes resulted in the highest fatigue strength, due to the optimal surface properties including higher extent of grain refinement, larger compressive residual stresses, "smoother" surface morphology and increased micro-hardness. However, the effect of USRP technology on improving fatigue strength of TB8 alloy was not significant in comparison with that of other titanium alloys(for example, Ti6 Al4 V), which was attributed to the notable surface residual stresses relaxation revealed from measurements on postfatigued USRP samples. Electron backscatter diffraction analysis confirmed that fatigue crack initiation occurred in the larger grains on the surface with high Schmid factor. Small cracks were found to propagate into the core material in a mixed transgranular and intergranular mode. Further analysis indicated that grain growth existed in post-fatigued USRP-treated TB8 samples and that the average geometrically necessary dislocations value reduced after fatigue loading.
基金Project supported by the Youth Project of Nanyang Normal University(No.QN2015027)
文摘A new 3d-4f（CuⅡ-CeⅢ） hetero-metallic compound containing two kinds of ligands, namely [CuⅡ（H2pdc）（phen）（H2O）]（HⅢ3O）2[CeⅢ（pdc）3][CuⅡ（phen）Ce（pdc）3]（1, H2 pdc = pyridine-2,6-dicarboxylic acid, phen = 1,10-phenanthroline）, has been synthesized by an ionothermal method using the ionic liquid 3-butyl-1-methylimidazolium bromide（[Bmim]Br） as solvent, and characterized by elemental analysis, energy-dispersive X-ray spectroscopy（EDS）, IR, XPS and single-crystal X-ray diffraction. The structure reveals that 1 belongs to the triclinic system, space group P1 with a = 12.044（7）, b = 14.841（8）, c = 22.305（13） A, α = 85.802（12）, β = 85.471（12）, γ = 89.174（11）°, Z = 2, V = 3964（4） A3, Dc = 1.804 g·cm-3, F（000） = 2140, μ = 1.757 mm-1, the final R = 0.0734, wR = 0.1094 and S = 1.013. The compound can be viewed as a two-dimensional layered structure composed by 3d-4f hetero-nuclear anions [Cu（phen）Ce（pdc）3]-, coordination cations [Cu（H2pdc）（phen）（H2O）]2＋, coordination anions [Ce（pdc）3]3- and protonated water molecules via hydrogen bonding interactions and π-π stacking. Moreover, the antimicrobial activities of 1 have been also investigated. The results indicated that its inhibitory activity is slightly higher than that of penicillin against Candida albicans.
基金Project supported by the National Natural Science Foundation of China(Nos.10132010 and 10072033)
文摘The propagation of surface acoustic waves in layered piezoelectric structureswith initial stresses is investigated. The phase velocity equations are obtained for electricallyfree and shorted cases, respectively. Effects of the initial stresses on the phase velocity and theelectromechanical coupling coefficient for the fundamental mode of the layered piezoelectricstructures are discussed. Numerical results for the c-axis oriented film of LiNbO_3 on a sapphiresubstrate are given. It is found that the fractional change in phase velocity is a linear functionwith the initial stresses, and the electromechanical coupling factor increases with an increase ofthe absolute values of the compressive initial stresses. The results are useful for the design ofsurface acoustic wave devices.
文摘The vertical structure of Planetary boundary layer over Arctic floating ice is presented by using about 50 atmospheric profiles and relevant data sounded at an ice station over Arctic Ocean from 22 August to 3 September,2003.It shows that the height of the convective boundary layer in day is greater than that of the stability boundary layer in night.The boundary layer can be described as vertical structures of stability,instability and multipling The interaction between relative warm and wet down draft air from up level and cool air of surface layer is significant,which causes stronger wind shear,temperature and humidity inversion with typical wind shear of 10 m/s/100 m,intensity of temperature inversion of 8 ℃/100 m.While the larger pack ice is broken by such process,new ice free area in the high latitudes of arctic ocean.The interactions between air/ice/water are enhanced.The fact helps to understanding characteristics of atmospheric boundary layer and its effect in Arctic floating ice region.
基金Project(2006DFA53250) supported by the International Science and Technology Cooperation Program of ChinaProject(2005CB623706) supported by the Major State Basic Research Development Program of China
文摘Fine-grained 01420 Al-Li alloy sheets were produced by thermo-mechanical processing based on the mechanism of particle stimulated nucleation of recrystallization.The thermo-mechanically processed sheets were observed to contain layers of different microstructures along the thickness.The precipitate behavior of the second phase particles and their effects on the distribution of dislocations and layered recrystallized grain structure were analyzed by optical microscopy(OM),scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray diffractometry(XRD).The formation mechanism of the gradient particles was discussed.The results show that after aging,a gradient distribution of large particles along the thickness is observed,the particles in the surface layer(SL) are distributed homogeneously,whereas those in the center layer(CL) are mainly distributed parallel to the rolling direction,and the volume fraction of the particles in the SL is higher than that in the CL.Subsequent rolling in the presence of layer-distributed particles results in a corresponding homogeneous distribution of highly strained regions in the SL and a banded distribution of them in CL,which is the main reason for the formation of layered grain structure along the thickness in the sheets.
基金the National Natural Science Foundation of China(Grant No.51773170)the Shaanxi Coal Joint Fund(Grant 2019JLM-24)+3 种基金funded by the International Science&Technology Cooperation Plan of Shaanxi Province(2021KW-52)Fund of Natural Science Foundation of Shaanxi Provincial(2021JQ-111)Fund of Basic and Applied Fundamental Research of Guangdong Provincial(2020A1515110861)sponsored by Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX202051)。
文摘Hierarchical layered structures,whether in a compact form like nacre or a porous manner like bone,are well known for their combined features of high stiffness,strength,and lightweight,inspiring many man-made materials and structures for high performance applications.The use of nacre/bone like hierarchical structures in polymer nanocomposites can achieve excellent mechanical and functional properties with high filler volume fractions after carefully aligning functional nanofillers,although the fabrication and processing remain a great challenge.In this work,a bio-inspired lightweight nano-cellular epoxy/graphene-Fe_(3)O_(4) nanocomposite with high nanofiller loading of 75 wt.%was successfully fabricated by combining features from both nacre and bone structures,via a simple compression molding process together with an eco-friendly supercritical CO_(2) foaming process to achieve robust mechanical strength and excellent electromagnetic interference(EMI)shielding effectiveness(SE)simultaneously.Highly aligned graphene-Fe_(3)O_(4) nanoplatelets with well controlled nanoscale porous structures(52.6 nm)enabled both low density(1.26 g/cm^(3))and high specific EMI SE>5200 dB/cm^(2)/g,as well as preserved tensile strength of 67 MPa.This study provides a sustainable route to fabricate nature mimicked structures with high performance and high flexibility for a wide range of applications,from portable electronics to healthcare devices.
