The perfectly matched layer （PML） is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-eleme...The perfectly matched layer （PML） is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-element time-domain numerical modeling of elastic wave equation. However, the finite-element time-domain scheme is based on the second- order wave equation in displacement formulation. Thus, the first-order PML in velocity-stress formulation cannot be directly applied to this scheme. In this article, we derive the finite- element matrix equations of second-order PML in displacement formulation, and accomplish the implementation of PML in finite-element time-domain modeling of elastic wave equation. The PML has an approximate zero reflection coefficients for bulk and surface waves in the finite-element modeling of P-SV and SH wave propagation in the 2D homogeneous elastic media. The numerical experiments using a two-layer model with irregular topography validate the efficiency of PML in the modeling of seismic wave propagation in geological models with complex structures and heterogeneous media.展开更多
A layered modeling method is proposed to resolve the problems resulting from the complexity of the error model of a multi-axis motion control system. In this model, a low level layer can be used as a virtual axis by t...A layered modeling method is proposed to resolve the problems resulting from the complexity of the error model of a multi-axis motion control system. In this model, a low level layer can be used as a virtual axis by the high level layer. The first advantage of this model is that the complex error model of a four-axis motion control system can be divided into several simple layers and each layer has different coupling strength to match the real control system. The second advantage lies in the fact that the controller in each layer can be designed specifically for a certain purpose. In this research, a three-layered cross coupling scheme in a four-axis motion control system is proposed to compensate the contouring error of the motion control system. Simulation results show that the maximum contouring error is reduced from 0.208 mm to 0.022 mm and the integration of absolute error is reduced from 0.108 mm to 0.015 mm, which are respectively better than 0.027 mm and 0.037 mm by the traditional method. And in the bottom layer the proposed method also has remarkable ability to achieve high contouring accuracy.展开更多
During the unmanned aerial vehicles （UAV） reconnaissance missions in the middle-low troposphere, the reconnaissance images are blurred and degraded due to the scattering process of aerosol under fog, haze and other ...During the unmanned aerial vehicles （UAV） reconnaissance missions in the middle-low troposphere, the reconnaissance images are blurred and degraded due to the scattering process of aerosol under fog, haze and other weather conditions, which reduce the image contrast and color fidelity. Considering the characteristics of UAV itself, this paper proposes a new algorithm for dehazing UAV reconnaissance images based on layered scattering model. The algorithm starts with the atmosphere scattering model, using the imaging distance, squint angle and other metadata acquired by the UAV. Based on the original model, a layered scattering model for dehazing is proposed. Considering the relationship between wave-length and extinction coefficient, the airlight intensity and extinction coefficient are calculated in the model. Finally, the restored images are obtained. In addition, a classification method based on Bayesian classification is used for classifica- tion of haze concentration of the image, avoiding the trouble of manual working. Then we evaluate the haze removal results according to both the subjective and objective criteria. The experimental results show that compared with the origin image, the comprehensive index of the image restored by our method increases by 282.84%, which proves that our method can obtain excellent dehazing effect.展开更多
A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with ＂soft＂ implying that the bulk-sh...A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with ＂soft＂ implying that the bulk-shear-wave velocity of the middle layer is smaller than that of the upper sensitive layer. Dispersion equations are obtained for unelectroded and traction-free upper surfaces which, in the limit, can be reduced to those for classical Love waves. Systematic parametric studies are subsequently carried out to quantify the effects of the soft middle layer upon Love wave propagation, including its thickness, mass density, dielectric constant and elastic coefficient. It is demonstrated that whilst the thickness and elastic coefficient of the middle layer affect significantly Love wave propagation, its mass density and dielectric constant have negligible influence. On condition that both the thickness and elastic coefficient of the middle layer are vanishingly small so that it degenerates into an imperfectly bonded interface, the three-layer model is also employed to investigate the influence of imperfect interfaces on Love waves propagating in piezoelectric layer/elastic sub- strate systems. Upon comparing with the predictions ob- tained by employing the traditional shear-lag model, the present three-layer structure model is found to be more ac- curate as it avoids the unrealistic displacement discontinuity across imperfectly bonded interfaces assumed by the shearlag model, especially for long waves when the piezoelectric layer is relatively thin.展开更多
A layered network model for optical transport networks is proposed in this paper,which involves Internet Protocol(IP) ,Synchronous Digital Hierarchy(SDH) and Wavelength Division Mul-tiplexing(WDM) layers. The strategy...A layered network model for optical transport networks is proposed in this paper,which involves Internet Protocol(IP) ,Synchronous Digital Hierarchy(SDH) and Wavelength Division Mul-tiplexing(WDM) layers. The strategy of Dynamic Joint Routing and Resource Allocation(DJRRA) and its algorithm description are also presented for the proposed layered network model. DJRRA op-timizes the bandwidth usage of interface links between different layers and the logic links inside all layers. The simulation results show that DJRRA can reduce the blocking probability and increase network throughput effectively,which is in contrast to the classical separate sequential routing and resource allocation solutions.展开更多
In this paper, firstly, a simplified version （SGRTM） of the generalized layered radiative transfer model （GRTM） within the canopy, developed by us, is presented. It reduces the information requirement of inputted ...In this paper, firstly, a simplified version （SGRTM） of the generalized layered radiative transfer model （GRTM） within the canopy, developed by us, is presented. It reduces the information requirement of inputted sky diffuse radiation, as well as of canopy morphology, and in turn saves computer resources. Results from the SGRTM agree perfectly with those of the GRTM. Secondly, by applying the linear superposition principle of the optics and by using the basic solutions of the GRTM for radiative transfer within the canopy under the condition of assumed zero soil reflectance, two sets of explicit analytical solutions of radiative transfer within the canopy with any soil reflectance magnitude are derived： one for incident diffuse, and the other for direct beam radiation. The explicit analytical solutions need two sets of basic solutions of canopy reflectance and transmittance under zero soil reflectance, run by the model for both diffuse and direct beam radiation. One set of basic solutions is the canopy reflectance αf （written as α1 for direct beam radiation） and transmittance βf （written as β1 for direction beam radiation） with zero soil reflectance for the downward radiation from above the canopy （i.e. sky）, and the other set is the canopy reflectance （αb） and transmittance βb for the upward radiation from below the canopy （i.e., ground）. Under the condition of the same plant architecture in the vertical layers, and the same leaf adaxial and abaxial optical properties in the canopies for the uniform diffuse radiation, the explicit solutions need only one set of basic solutions, because under this condition the two basic solutions are equal, i.e., αf = αb and βf = βb. Using the explicit analytical solutions, the fractions of any kind of incident solar radiation reflected from （defined as surface albedo, or canopy reflectance）, transmitted through （defined as canopy transmittance）, and absorbed by （defined as canopy absorptance） the canopy and other properties pertinent to the radiative transfer within the canopy can be estimated easily on the ground surface below the canopy （soil or snow surface） with any reflectance magnitudes. The simplified transfer model is proven to have a similar accuracy compared to the detailed model, as well as very efficient computing.展开更多
An optimized device structure for reducing the RESET current of phase-change random access memory （PCRAM） with blade-type like （BTL） phase change layer is proposed. The electrical thermal analysis of the BTL cell ...An optimized device structure for reducing the RESET current of phase-change random access memory （PCRAM） with blade-type like （BTL） phase change layer is proposed. The electrical thermal analysis of the BTL cell and the blade heater contactor structure by three-dimensional finite element modeling are compared with each other during RESET operation. The simulation results show that the programming region of the phase change layer in the BTL cell is much smaller, and thermal electrical distributions of the BTL cell are more concentrated on the TiN/GST interface. The results indicate that the BTL cell has the superiorities of increasing the heating efficiency, decreasing the power consumption and reducing the RESET current from 0.67mA to 0.32mA. Therefore, the BTL cell will be appropriate for high performance PCRAM device with lower power consumption and lower RESET current.展开更多
Polyvinylpyrrolidone K-30(PVP) was introduced into the preparation of nanozero-valent iron(n ZVI) and the traditional liquid-phase reduction was improved. The introduction of PVP simplified the traditional method.The ...Polyvinylpyrrolidone K-30(PVP) was introduced into the preparation of nanozero-valent iron(n ZVI) and the traditional liquid-phase reduction was improved. The introduction of PVP simplified the traditional method.The n ZVI prepared with this new approach showed excellent surface characters and high performance on the removal of cadmium. TEM results showed that the aggregates of n ZVI can reach to several micrometers in length but less than 100 nm in diameter. The iron particles that were enclosed by a layer of oxide film that is less than10 nm, demonstrated that the n ZVI possesses a core–shell structure. BET results indicate that the specific surface area of the n ZVI was 20.3159 m^2g^(-1). A three factor and three level orthogonal experiment was employed to find out the dominant factor that affects the removal rate of cadmium by n ZVI. Based on the range values, the prominence order of each factor was: initial p H of the solution N initial concentration of cadmium N dosage of n ZVI, the range was 96.453, 3.294 and 1.747, respectively. A simulation was performed under the same condition and a same conclusion was derived, this consistence confirmed the validity of the conclusion that p H is the most significant factor that affects the adsorption efficiency.展开更多
The proliferation of textual data in society currently is overwhelming, in particular, unstructured textual data is being constantly generated via call centre logs, emails, documents on the web, blogs, tweets, custome...The proliferation of textual data in society currently is overwhelming, in particular, unstructured textual data is being constantly generated via call centre logs, emails, documents on the web, blogs, tweets, customer comments, customer reviews, etc.While the amount of textual data is increasing rapidly, users ability to summarise, understand, and make sense of such data for making better business/living decisions remains challenging. This paper studies how to analyse textual data, based on layered software patterns, for extracting insightful user intelligence from a large collection of documents and for using such information to improve user operations and performance.展开更多
This paper presents experimental and theoretical methods to study the damage layer evolution of a breakwater made with concrete hollow squares in marine environment.Wetting time was directly related to the performance...This paper presents experimental and theoretical methods to study the damage layer evolution of a breakwater made with concrete hollow squares in marine environment.Wetting time was directly related to the performance degradation of the breakwater by observation.The thickness of damage layer was detected by means of ultrasonic testing.Meanwhile,some samples drilled from concrete hollow squares were analyzed by SEM and XRD in order to illustrate the damage mechanism.Subsequently,a theoretical model containing wetting time ratio was established to simulate the damage layer evolution based on Fick’s second law,which could be suggested to predict the service life of concrete structures in marine environment.展开更多
The similarities and differences in inherent mechanism and characteristic frequency between the onedimensional(1D)poroelastic model and the layered White model were investigated.This investigation was conducted under ...The similarities and differences in inherent mechanism and characteristic frequency between the onedimensional(1D)poroelastic model and the layered White model were investigated.This investigation was conducted under the assumption that the rock was homogenous and isotropic at the mesoscopic scale.For the inherent mechanism,both models resulted from quasi-static flow in a slow P-wave diffusion mode,and the differences between them originated from saturated fluids and boundary conditions.On the other hand,for the characteristic frequencies of the models,the characteristic frequency of the 1D poroelastic model was first modified because the elastic constant and formula for calculating it were misused and then compared to that of the layered White model.Both of them moved towards higher frequencies with increasing permeability and decreasing viscosity and diffusion length.The differences between them were due to the diffusion length.The diffusion length for the 1D poroelastic model was determined by the sample length,whereas that for the layered White model was determined by the length of the representative elementary volume(REV).Subsequently,a numerical example was presented to demonstrate the similarities and differences between the models.Finally,published experimental data were interpreted using the 1D poroelastic model combined with the Cole-Cole model.The prediction of the combined model was in good agreement with the experimental data,thereby validating the effectiveness of the 1D poroelastic model.Furthermore,the modified characteristic frequency in our study was much closer to the experimental data than the previous prediction,validating the effectiveness of our modification of the characteristic frequency of the 1D poroelastic model.The investigation provided insight into the internal relationship between wave-induced fluid flow(WIFF)models at macroscopic and mesoscopic scales and can aid in a better understanding of the elastic modulus dispersion and attenuation caused by the WIFF at different scales.展开更多
Using Monte Carlo simulations, we have investigated the classical XY model on triangular lattices of ultra-thin film structures with middle ferromagnetic layers sandwiched between two antiferromagnetic layers. The int...Using Monte Carlo simulations, we have investigated the classical XY model on triangular lattices of ultra-thin film structures with middle ferromagnetic layers sandwiched between two antiferromagnetic layers. The internal energy, the specifc heat, the chirality and the chiral susceptibility are calculated in order to clarify phase transitions and critical phenomena. Prom the finite-size scaling analyses, the values of critical exponents are determined. In a range of interaction parameters, we find that the chirality steeply goes up as temperature increases in a temperature range; correspondingly the value of a critical exponent for this change is estimated.展开更多
A rapid and accurate method for two-point ray tracing in horizontally layered velocity model is presented in this paper. Numerical experiments show that this method provides stable and rapid convergence with high accu...A rapid and accurate method for two-point ray tracing in horizontally layered velocity model is presented in this paper. Numerical experiments show that this method provides stable and rapid convergence with high accuracies, regardless of various 1-D velocity structures, takeoff angles and epicentral distances. This two-point ray tracing method is compared with the pseudobending technique and the method advanced by Kim and Baag (2002). It turns out that the method in this paper is much more efficient and accurate than the pseudobending technique, but is only applicable to 1-D velocity model. Kim's method is equivalent to ours for cases without large takeoff angles, but it fails to work when the takeoff angle is close to 90°. On the other hand, the method presented in this paper is applicable to cases with any takeoff angles with rapid and accurate convergence. Therefore, this method is a good choice for two-point ray tracing problems in horizontally layered velocity model and is efficient enough to be applied to a wide range of seismic problems.展开更多
The applications of intelligent techniques have increased exponentially in recent days to study most of the non-linear parameters. In particular, the behavior of earth resembles the non- linearity applications. An eff...The applications of intelligent techniques have increased exponentially in recent days to study most of the non-linear parameters. In particular, the behavior of earth resembles the non- linearity applications. An efficient tool is needed for the interpretation of geophysical parameters to study the subsurface of the earth. Artificial Neural Networks （ANN） perform certain tasks if the structure of the network is modified accordingly for the purpose it has been used. The three most robust networks were taken and comparatively analyzed for their performance to choose the appropriate network. The single- layer feed-forward neural network with the back propagation algorithm is chosen as one of the well- suited networks after comparing the results. Initially, certain synthetic data sets of all three-layer curves have been taken tk^r training the network, and the network is validated by the field datasets collected from Tuticorin Coastal Region （78°7＇30＂E and 8°48＇45＂N）, Tamil Nadu, India. The interpretation has been done successfully using the corresponding learning algorithm in the present study. With proper training of back propagation networks, it tends to give the resistivity and thickness of the subsurface layer model of the field resistivity data concerning the synthetic data trained earlier in the appropriate network. The network is trained with more Vertical Electrical Sounding （VES） data, and this trained network is demon- strated by the field data. Groundwater table depth also has been modeled.展开更多
An urban boundary layer model （UBLM） is improved by incorporating the effect of buildings with a sectional drag coefficient and a height-distributed canopy drag length scale. The improved UBLM is applied to simulate...An urban boundary layer model （UBLM） is improved by incorporating the effect of buildings with a sectional drag coefficient and a height-distributed canopy drag length scale. The improved UBLM is applied to simulate the wind fields over three typical urban blocks over the Beijing area with different height-towidth ratios. For comparisons, the wind fields over the same blocks are simulated by an urban sub-domain scale model resolving the buildings explicitly. The wind fields simulated from the two different methods are in good agreement. Then, two-dimensional building morphological characteristics and urban canopy parameters for Beijing are derived from detailed building height data. Finally, experiements are conducted to investigate the effect of buildings on the wind field in Beijing using the improved UBLM.展开更多
In this paper, we present a magnetocardiogram （MCG） simulation study using the boundary element method （BEM） and based on the virtual heart model and the realistic human volume conductor model. The different contr...In this paper, we present a magnetocardiogram （MCG） simulation study using the boundary element method （BEM） and based on the virtual heart model and the realistic human volume conductor model. The different contributions of cardiac equivalent source models and volume conductor models to the MCG are deeply and comprehensively investigated. The single dipole source model, the multiple dipoles source model and the equivalent double layer （EDL） source model are analysed and compared with the cardiac equivalent source models. Meanwhile, the effect of the volume conductor model on the MCG combined with these cardiac equivalent sources is investigated. The simulation results demonstrate that the cardiac electrophysiological information will be partly missed when only the single dipole source is taken, while the EDL source is a good option for MCG simulation and the effect of the volume conductor is smallest for the EDL source. Therefore, the EDL source is suitable for the study of MCG forward and inverse problems, and more attention should be paid to it in future MCG studies.展开更多
Traditional MEMS （microelectromechanical system） design methodology is not a structured method and has become an obstacle for MEMS creative design. In this paper, a novel method of mask synthesis and verification fo...Traditional MEMS （microelectromechanical system） design methodology is not a structured method and has become an obstacle for MEMS creative design. In this paper, a novel method of mask synthesis and verification for surface micro-machined MEMS is proposed, which is based on the geometric model of a MEMS device. The emphasis is focused on synthesizing the masks at the basis of the layer model generated from the geometric model of the MEMS device. The method is comprised of several steps： the correction of the layer model, the generation of initial masks and final masks including multi-layer etch masks, and mask simulation. Finally some test resuhs are given.展开更多
In order to investigate the high-temperature evaporation characteristics of multicomponent liquid fuel,three kinds of blended fuel:n-heptane/n-decane/RP-3 aviation kerosene-ethanol were experimentally studied with and...In order to investigate the high-temperature evaporation characteristics of multicomponent liquid fuel,three kinds of blended fuel:n-heptane/n-decane/RP-3 aviation kerosene-ethanol were experimentally studied with and without forced convection.Further,based on zerodiffusion and infinite diffusion concept,this study expanded Thick Exchange Layer evaporation model with Natural Convection effect(NC-TEL)to multicomponent liquid fuels.The experimental results show that the droplet evaporation rate increases significantly with the increase of ambient temperature.Higher temperature leads to more significant relationships between the composition ratio and the evaporation rate.The effect of forced convection is not obviously under the circumstance in this paper.Then,the evaporation models were validated by experimental data.In general,the new NC-TEL model behaves better than the Ranz-Marshall(R-M)model,and the prediction accuracy at high temperature is improved by 8%to 35%.In lower temperature conditions,the prediction of zero-diffusion NC-TEL model is better than the infinite diffusion NC-TEL model.In high-temperature conditions,for n-heptane-ethanol droplet,the predictions of NC-TEL model are accurate,but for n-decane/RP-3 aviation kerosene-ethanol,the predictions are lower than experimental results.This may be caused by the micro-explosion phenomenon and the Marangoni phenomenon.展开更多
A boundary layer model was developed to predict the capture of inclusions by steel-slag interface in a turbulent fluid flow,which is based on the detailed analysis of inclusion trajectories.The effective boundary laye...A boundary layer model was developed to predict the capture of inclusions by steel-slag interface in a turbulent fluid flow,which is based on the detailed analysis of inclusion trajectories.The effective boundary layer for inclusion removal was proposed by a statistical method.It is noticed that the capture of inclusions by steel-slag interface is not only dependent on the diameter of inclusions but also related to the local turbulent conditions.In high turbulent flow fields,the transport of inclusions is mainly dominated by the turbulent flow,and thus,the effective boundary layer thickness is mainly affected by the level of turbulent kinetic energy and is almost independent of the inclusion diameter.The inertia of inclusions gradually takes over the stochastic effect of turbulent flow,and the effect of inclusion diameter on effective boundary layer thickness becomes more noticeable with the decrease in the level of turbulent kinetic energy.Besides,the effective boundary layer thickness is more susceptible to the inclusion diameter for larger inclusions due to its greater inertia under the same turbulent condition while it principally depends on the level of turbulent kinetic energy for smaller inclusions.As the characteristic velocity increases,the time for inclusions transport and interaction with steel-slag interface decreases,and thus,the effective boundary layer thickness decreases.Moreover,the graphical user interface was developed by using the cubic spline interpolation for ease of coupling the current boundary layer model with the macro-scale model of a turbulent fluid flow in the metallurgical vessel.展开更多
Lock-in amplifiers are used to detect and measure very small alternating current(AC)signals down to the range of nVs.Accurate measurements can be made even when the small signals are buried by noise thousands of times...Lock-in amplifiers are used to detect and measure very small alternating current(AC)signals down to the range of nVs.Accurate measurements can be made even when the small signals are buried by noise thousands of times larger.With the digital signal processing(DSP)technology involved in modern instrumentation,a lock-in amplifier is more versatile in sensing and recovering small signals.Combining the virtual instrumentation technology,we reorganize the functional blocks of a programmable lock-in amplifier and build it as a virtual spectrum analyzer,virtual impedance meter,virtual network analyzer,virtual semiconductor parameter analyzer,signal generator,etc.A 4 layer model is used to implement these virtual instruments.The same virtual instrument can also be implemented on a general purpose FPGA developing board.展开更多
基金sponsored by the National Natural Science Foundation of China Research(Grant No.41274138)the Science Foundation of China University of Petroleum(Beijing)(No.KYJJ2012-05-02)
文摘The perfectly matched layer （PML） is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-element time-domain numerical modeling of elastic wave equation. However, the finite-element time-domain scheme is based on the second- order wave equation in displacement formulation. Thus, the first-order PML in velocity-stress formulation cannot be directly applied to this scheme. In this article, we derive the finite- element matrix equations of second-order PML in displacement formulation, and accomplish the implementation of PML in finite-element time-domain modeling of elastic wave equation. The PML has an approximate zero reflection coefficients for bulk and surface waves in the finite-element modeling of P-SV and SH wave propagation in the 2D homogeneous elastic media. The numerical experiments using a two-layer model with irregular topography validate the efficiency of PML in the modeling of seismic wave propagation in geological models with complex structures and heterogeneous media.
基金Project(51005086)supported by the National Natural Science Foundation of ChinaProject(2010MS085)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(DMETKF2013008)supported by the Open Project of the State Key Laboratory of Digital Manufacturing Equipment and Technology,China
文摘A layered modeling method is proposed to resolve the problems resulting from the complexity of the error model of a multi-axis motion control system. In this model, a low level layer can be used as a virtual axis by the high level layer. The first advantage of this model is that the complex error model of a four-axis motion control system can be divided into several simple layers and each layer has different coupling strength to match the real control system. The second advantage lies in the fact that the controller in each layer can be designed specifically for a certain purpose. In this research, a three-layered cross coupling scheme in a four-axis motion control system is proposed to compensate the contouring error of the motion control system. Simulation results show that the maximum contouring error is reduced from 0.208 mm to 0.022 mm and the integration of absolute error is reduced from 0.108 mm to 0.015 mm, which are respectively better than 0.027 mm and 0.037 mm by the traditional method. And in the bottom layer the proposed method also has remarkable ability to achieve high contouring accuracy.
基金supported by the National Natural Science Foundation of China(No.61450008)
文摘During the unmanned aerial vehicles （UAV） reconnaissance missions in the middle-low troposphere, the reconnaissance images are blurred and degraded due to the scattering process of aerosol under fog, haze and other weather conditions, which reduce the image contrast and color fidelity. Considering the characteristics of UAV itself, this paper proposes a new algorithm for dehazing UAV reconnaissance images based on layered scattering model. The algorithm starts with the atmosphere scattering model, using the imaging distance, squint angle and other metadata acquired by the UAV. Based on the original model, a layered scattering model for dehazing is proposed. Considering the relationship between wave-length and extinction coefficient, the airlight intensity and extinction coefficient are calculated in the model. Finally, the restored images are obtained. In addition, a classification method based on Bayesian classification is used for classifica- tion of haze concentration of the image, avoiding the trouble of manual working. Then we evaluate the haze removal results according to both the subjective and objective criteria. The experimental results show that compared with the origin image, the comprehensive index of the image restored by our method increases by 282.84%, which proves that our method can obtain excellent dehazing effect.
基金supported by the National Natural Science Foundation of China(10972171)the Program for New Century Excellent Talents in Universities(NCET-08-0429)the National 111 Project(B06024)
文摘A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with ＂soft＂ implying that the bulk-shear-wave velocity of the middle layer is smaller than that of the upper sensitive layer. Dispersion equations are obtained for unelectroded and traction-free upper surfaces which, in the limit, can be reduced to those for classical Love waves. Systematic parametric studies are subsequently carried out to quantify the effects of the soft middle layer upon Love wave propagation, including its thickness, mass density, dielectric constant and elastic coefficient. It is demonstrated that whilst the thickness and elastic coefficient of the middle layer affect significantly Love wave propagation, its mass density and dielectric constant have negligible influence. On condition that both the thickness and elastic coefficient of the middle layer are vanishingly small so that it degenerates into an imperfectly bonded interface, the three-layer model is also employed to investigate the influence of imperfect interfaces on Love waves propagating in piezoelectric layer/elastic sub- strate systems. Upon comparing with the predictions ob- tained by employing the traditional shear-lag model, the present three-layer structure model is found to be more ac- curate as it avoids the unrealistic displacement discontinuity across imperfectly bonded interfaces assumed by the shearlag model, especially for long waves when the piezoelectric layer is relatively thin.
基金the Science & Technology Foundation of Huawei Ltd. (No.YJCB2005040SW)the Creative Foundation of Xidian University (No.05030).
文摘A layered network model for optical transport networks is proposed in this paper,which involves Internet Protocol(IP) ,Synchronous Digital Hierarchy(SDH) and Wavelength Division Mul-tiplexing(WDM) layers. The strategy of Dynamic Joint Routing and Resource Allocation(DJRRA) and its algorithm description are also presented for the proposed layered network model. DJRRA op-timizes the bandwidth usage of interface links between different layers and the logic links inside all layers. The simulation results show that DJRRA can reduce the blocking probability and increase network throughput effectively,which is in contrast to the classical separate sequential routing and resource allocation solutions.
基金This work was supported by the National Natural Science Foundation of China under Grant Nos. 40233034, 40575043the Chinese Academy of Sciences （KZCX3_SW_229）.
文摘In this paper, firstly, a simplified version （SGRTM） of the generalized layered radiative transfer model （GRTM） within the canopy, developed by us, is presented. It reduces the information requirement of inputted sky diffuse radiation, as well as of canopy morphology, and in turn saves computer resources. Results from the SGRTM agree perfectly with those of the GRTM. Secondly, by applying the linear superposition principle of the optics and by using the basic solutions of the GRTM for radiative transfer within the canopy under the condition of assumed zero soil reflectance, two sets of explicit analytical solutions of radiative transfer within the canopy with any soil reflectance magnitude are derived： one for incident diffuse, and the other for direct beam radiation. The explicit analytical solutions need two sets of basic solutions of canopy reflectance and transmittance under zero soil reflectance, run by the model for both diffuse and direct beam radiation. One set of basic solutions is the canopy reflectance αf （written as α1 for direct beam radiation） and transmittance βf （written as β1 for direction beam radiation） with zero soil reflectance for the downward radiation from above the canopy （i.e. sky）, and the other set is the canopy reflectance （αb） and transmittance βb for the upward radiation from below the canopy （i.e., ground）. Under the condition of the same plant architecture in the vertical layers, and the same leaf adaxial and abaxial optical properties in the canopies for the uniform diffuse radiation, the explicit solutions need only one set of basic solutions, because under this condition the two basic solutions are equal, i.e., αf = αb and βf = βb. Using the explicit analytical solutions, the fractions of any kind of incident solar radiation reflected from （defined as surface albedo, or canopy reflectance）, transmitted through （defined as canopy transmittance）, and absorbed by （defined as canopy absorptance） the canopy and other properties pertinent to the radiative transfer within the canopy can be estimated easily on the ground surface below the canopy （soil or snow surface） with any reflectance magnitudes. The simplified transfer model is proven to have a similar accuracy compared to the detailed model, as well as very efficient computing.
基金Supported by the Strategic Priority Research Program of the Chinese Academy of Sciences under Grant No XDA09020402the National Integrate Circuit Research Program of China under Grant No 2009ZX02023-003+1 种基金the National Natural Science Foundation of China under Grant Nos 61261160500,61376006,61401444 and 61504157the Science and Technology Council of Shanghai under Grant Nos 14DZ2294900,15DZ2270900 and 14ZR1447500
文摘An optimized device structure for reducing the RESET current of phase-change random access memory （PCRAM） with blade-type like （BTL） phase change layer is proposed. The electrical thermal analysis of the BTL cell and the blade heater contactor structure by three-dimensional finite element modeling are compared with each other during RESET operation. The simulation results show that the programming region of the phase change layer in the BTL cell is much smaller, and thermal electrical distributions of the BTL cell are more concentrated on the TiN/GST interface. The results indicate that the BTL cell has the superiorities of increasing the heating efficiency, decreasing the power consumption and reducing the RESET current from 0.67mA to 0.32mA. Therefore, the BTL cell will be appropriate for high performance PCRAM device with lower power consumption and lower RESET current.
基金Supported by the National Natural Science Foundation of China(51278147)the Funds for Creative Research Groups of China(51121062)State Key Laboratory of Urban Water Resource and Environment(Harbin Institute of Technology)(2014TS02)
文摘Polyvinylpyrrolidone K-30(PVP) was introduced into the preparation of nanozero-valent iron(n ZVI) and the traditional liquid-phase reduction was improved. The introduction of PVP simplified the traditional method.The n ZVI prepared with this new approach showed excellent surface characters and high performance on the removal of cadmium. TEM results showed that the aggregates of n ZVI can reach to several micrometers in length but less than 100 nm in diameter. The iron particles that were enclosed by a layer of oxide film that is less than10 nm, demonstrated that the n ZVI possesses a core–shell structure. BET results indicate that the specific surface area of the n ZVI was 20.3159 m^2g^(-1). A three factor and three level orthogonal experiment was employed to find out the dominant factor that affects the removal rate of cadmium by n ZVI. Based on the range values, the prominence order of each factor was: initial p H of the solution N initial concentration of cadmium N dosage of n ZVI, the range was 96.453, 3.294 and 1.747, respectively. A simulation was performed under the same condition and a same conclusion was derived, this consistence confirmed the validity of the conclusion that p H is the most significant factor that affects the adsorption efficiency.
文摘The proliferation of textual data in society currently is overwhelming, in particular, unstructured textual data is being constantly generated via call centre logs, emails, documents on the web, blogs, tweets, customer comments, customer reviews, etc.While the amount of textual data is increasing rapidly, users ability to summarise, understand, and make sense of such data for making better business/living decisions remains challenging. This paper studies how to analyse textual data, based on layered software patterns, for extracting insightful user intelligence from a large collection of documents and for using such information to improve user operations and performance.
基金The authors would like to acknowledge the financial support by the National Natural Science Foundation of China(11832013,11772164)the National Basic Research Program of China(973 Program,2009CB623203)+1 种基金the Key Research Program of Society Development of Ningbo(2013C51007)K.C.Wong Magna Fund in Ningbo University.
文摘This paper presents experimental and theoretical methods to study the damage layer evolution of a breakwater made with concrete hollow squares in marine environment.Wetting time was directly related to the performance degradation of the breakwater by observation.The thickness of damage layer was detected by means of ultrasonic testing.Meanwhile,some samples drilled from concrete hollow squares were analyzed by SEM and XRD in order to illustrate the damage mechanism.Subsequently,a theoretical model containing wetting time ratio was established to simulate the damage layer evolution based on Fick’s second law,which could be suggested to predict the service life of concrete structures in marine environment.
基金supported by the National Natural Science Foundation of China (42030810,42104115)。
文摘The similarities and differences in inherent mechanism and characteristic frequency between the onedimensional(1D)poroelastic model and the layered White model were investigated.This investigation was conducted under the assumption that the rock was homogenous and isotropic at the mesoscopic scale.For the inherent mechanism,both models resulted from quasi-static flow in a slow P-wave diffusion mode,and the differences between them originated from saturated fluids and boundary conditions.On the other hand,for the characteristic frequencies of the models,the characteristic frequency of the 1D poroelastic model was first modified because the elastic constant and formula for calculating it were misused and then compared to that of the layered White model.Both of them moved towards higher frequencies with increasing permeability and decreasing viscosity and diffusion length.The differences between them were due to the diffusion length.The diffusion length for the 1D poroelastic model was determined by the sample length,whereas that for the layered White model was determined by the length of the representative elementary volume(REV).Subsequently,a numerical example was presented to demonstrate the similarities and differences between the models.Finally,published experimental data were interpreted using the 1D poroelastic model combined with the Cole-Cole model.The prediction of the combined model was in good agreement with the experimental data,thereby validating the effectiveness of the 1D poroelastic model.Furthermore,the modified characteristic frequency in our study was much closer to the experimental data than the previous prediction,validating the effectiveness of our modification of the characteristic frequency of the 1D poroelastic model.The investigation provided insight into the internal relationship between wave-induced fluid flow(WIFF)models at macroscopic and mesoscopic scales and can aid in a better understanding of the elastic modulus dispersion and attenuation caused by the WIFF at different scales.
基金Project supported by the National Natural Science Foundation of China （Grant No 10234010）, Acknowledgements The authors would like to thank Professor T. Horiguch for his useful discussion. 0ur simulations were carried out on IBM RS/6000 SP3 at the Centre for Computational Science and Engineering of Peking University.
文摘Using Monte Carlo simulations, we have investigated the classical XY model on triangular lattices of ultra-thin film structures with middle ferromagnetic layers sandwiched between two antiferromagnetic layers. The internal energy, the specifc heat, the chirality and the chiral susceptibility are calculated in order to clarify phase transitions and critical phenomena. Prom the finite-size scaling analyses, the values of critical exponents are determined. In a range of interaction parameters, we find that the chirality steeply goes up as temperature increases in a temperature range; correspondingly the value of a critical exponent for this change is estimated.
基金National Natural Science Foundation of China (40074008 and 40134010).
文摘A rapid and accurate method for two-point ray tracing in horizontally layered velocity model is presented in this paper. Numerical experiments show that this method provides stable and rapid convergence with high accuracies, regardless of various 1-D velocity structures, takeoff angles and epicentral distances. This two-point ray tracing method is compared with the pseudobending technique and the method advanced by Kim and Baag (2002). It turns out that the method in this paper is much more efficient and accurate than the pseudobending technique, but is only applicable to 1-D velocity model. Kim's method is equivalent to ours for cases without large takeoff angles, but it fails to work when the takeoff angle is close to 90°. On the other hand, the method presented in this paper is applicable to cases with any takeoff angles with rapid and accurate convergence. Therefore, this method is a good choice for two-point ray tracing problems in horizontally layered velocity model and is efficient enough to be applied to a wide range of seismic problems.
文摘The applications of intelligent techniques have increased exponentially in recent days to study most of the non-linear parameters. In particular, the behavior of earth resembles the non- linearity applications. An efficient tool is needed for the interpretation of geophysical parameters to study the subsurface of the earth. Artificial Neural Networks （ANN） perform certain tasks if the structure of the network is modified accordingly for the purpose it has been used. The three most robust networks were taken and comparatively analyzed for their performance to choose the appropriate network. The single- layer feed-forward neural network with the back propagation algorithm is chosen as one of the well- suited networks after comparing the results. Initially, certain synthetic data sets of all three-layer curves have been taken tk^r training the network, and the network is validated by the field datasets collected from Tuticorin Coastal Region （78°7＇30＂E and 8°48＇45＂N）, Tamil Nadu, India. The interpretation has been done successfully using the corresponding learning algorithm in the present study. With proper training of back propagation networks, it tends to give the resistivity and thickness of the subsurface layer model of the field resistivity data concerning the synthetic data trained earlier in the appropriate network. The network is trained with more Vertical Electrical Sounding （VES） data, and this trained network is demon- strated by the field data. Groundwater table depth also has been modeled.
基金funded by National Nat-ural Science Foundation of China(Grants Nos.40505002,40652001,and 40775015)Beijing Natural Science Foun-dation(Grant No.8051002)+1 种基金Beijing New Star Project of Science and Technology(Grant No.2005A03)the Ministry of Science and Technology of China(Grant Nos.2008BAC37B04,2006BAJ02A01,and GYHY200906035)
文摘An urban boundary layer model （UBLM） is improved by incorporating the effect of buildings with a sectional drag coefficient and a height-distributed canopy drag length scale. The improved UBLM is applied to simulate the wind fields over three typical urban blocks over the Beijing area with different height-towidth ratios. For comparisons, the wind fields over the same blocks are simulated by an urban sub-domain scale model resolving the buildings explicitly. The wind fields simulated from the two different methods are in good agreement. Then, two-dimensional building morphological characteristics and urban canopy parameters for Beijing are derived from detailed building height data. Finally, experiements are conducted to investigate the effect of buildings on the wind field in Beijing using the improved UBLM.
基金supported by the State Key Development Program for Basic Research of China (Grant Nos. 2007CB512100 and2006CB601007)the National Natural Science Foundation of China (Grant No. 10674006)+2 种基金the National High Technology Research and Development Program of China (Grant No. 2007AA03Z238)China Postdoctoral Science Foundation (Grant No. 20090461376)the Fundamental Research Funds for the Central Universities (Grant No. KYJD09001)
文摘In this paper, we present a magnetocardiogram （MCG） simulation study using the boundary element method （BEM） and based on the virtual heart model and the realistic human volume conductor model. The different contributions of cardiac equivalent source models and volume conductor models to the MCG are deeply and comprehensively investigated. The single dipole source model, the multiple dipoles source model and the equivalent double layer （EDL） source model are analysed and compared with the cardiac equivalent source models. Meanwhile, the effect of the volume conductor model on the MCG combined with these cardiac equivalent sources is investigated. The simulation results demonstrate that the cardiac electrophysiological information will be partly missed when only the single dipole source is taken, while the EDL source is a good option for MCG simulation and the effect of the volume conductor is smallest for the EDL source. Therefore, the EDL source is suitable for the study of MCG forward and inverse problems, and more attention should be paid to it in future MCG studies.
基金Project supported by the National Natural Science Foundation of China (Nos. 60273057 and 60403049) and the National Basic Re-search Program (973) of China (No. 2002CB312106)
文摘Traditional MEMS （microelectromechanical system） design methodology is not a structured method and has become an obstacle for MEMS creative design. In this paper, a novel method of mask synthesis and verification for surface micro-machined MEMS is proposed, which is based on the geometric model of a MEMS device. The emphasis is focused on synthesizing the masks at the basis of the layer model generated from the geometric model of the MEMS device. The method is comprised of several steps： the correction of the layer model, the generation of initial masks and final masks including multi-layer etch masks, and mask simulation. Finally some test resuhs are given.
基金co-supported by the National Key R&D Program of China(Nos.2017YFB0202400 and 2017YFB0202402)the National Natural Science Foundaion of China(No.91741125)。
文摘In order to investigate the high-temperature evaporation characteristics of multicomponent liquid fuel,three kinds of blended fuel:n-heptane/n-decane/RP-3 aviation kerosene-ethanol were experimentally studied with and without forced convection.Further,based on zerodiffusion and infinite diffusion concept,this study expanded Thick Exchange Layer evaporation model with Natural Convection effect(NC-TEL)to multicomponent liquid fuels.The experimental results show that the droplet evaporation rate increases significantly with the increase of ambient temperature.Higher temperature leads to more significant relationships between the composition ratio and the evaporation rate.The effect of forced convection is not obviously under the circumstance in this paper.Then,the evaporation models were validated by experimental data.In general,the new NC-TEL model behaves better than the Ranz-Marshall(R-M)model,and the prediction accuracy at high temperature is improved by 8%to 35%.In lower temperature conditions,the prediction of zero-diffusion NC-TEL model is better than the infinite diffusion NC-TEL model.In high-temperature conditions,for n-heptane-ethanol droplet,the predictions of NC-TEL model are accurate,but for n-decane/RP-3 aviation kerosene-ethanol,the predictions are lower than experimental results.This may be caused by the micro-explosion phenomenon and the Marangoni phenomenon.
基金the National Natural Science Foundation of China(Grant Nos.51904025 and U22A20171)the Fundamental Research Funds for the Central Universities(Grant No.FRF-IDRY-20-011)+1 种基金National Postdoctoral Program for Innovative Talents(Grant No.BX20190030)the High Steel Center(HSC)at North China University of Technology and University of Science and Technology Beijing,China.
文摘A boundary layer model was developed to predict the capture of inclusions by steel-slag interface in a turbulent fluid flow,which is based on the detailed analysis of inclusion trajectories.The effective boundary layer for inclusion removal was proposed by a statistical method.It is noticed that the capture of inclusions by steel-slag interface is not only dependent on the diameter of inclusions but also related to the local turbulent conditions.In high turbulent flow fields,the transport of inclusions is mainly dominated by the turbulent flow,and thus,the effective boundary layer thickness is mainly affected by the level of turbulent kinetic energy and is almost independent of the inclusion diameter.The inertia of inclusions gradually takes over the stochastic effect of turbulent flow,and the effect of inclusion diameter on effective boundary layer thickness becomes more noticeable with the decrease in the level of turbulent kinetic energy.Besides,the effective boundary layer thickness is more susceptible to the inclusion diameter for larger inclusions due to its greater inertia under the same turbulent condition while it principally depends on the level of turbulent kinetic energy for smaller inclusions.As the characteristic velocity increases,the time for inclusions transport and interaction with steel-slag interface decreases,and thus,the effective boundary layer thickness decreases.Moreover,the graphical user interface was developed by using the cubic spline interpolation for ease of coupling the current boundary layer model with the macro-scale model of a turbulent fluid flow in the metallurgical vessel.
文摘Lock-in amplifiers are used to detect and measure very small alternating current(AC)signals down to the range of nVs.Accurate measurements can be made even when the small signals are buried by noise thousands of times larger.With the digital signal processing(DSP)technology involved in modern instrumentation,a lock-in amplifier is more versatile in sensing and recovering small signals.Combining the virtual instrumentation technology,we reorganize the functional blocks of a programmable lock-in amplifier and build it as a virtual spectrum analyzer,virtual impedance meter,virtual network analyzer,virtual semiconductor parameter analyzer,signal generator,etc.A 4 layer model is used to implement these virtual instruments.The same virtual instrument can also be implemented on a general purpose FPGA developing board.
