The concentrically layered thermal cloaks with isotropic materials could realize the equivalent thermal cloaking effect with Pendry＇s cloak, while the effectiveness is scarcely investigated quantitatively. Here we ex...The concentrically layered thermal cloaks with isotropic materials could realize the equivalent thermal cloaking effect with Pendry＇s cloak, while the effectiveness is scarcely investigated quantitatively. Here we examine the cloaking effectiveness quantitatively by evaluating the standard deviation of the temperature difference between the simulated plane with the layered thermal cloak and Pendry＇s thermal cloak. The design rules for the isotropic materials in terms of thermal conductivity and layer thickness are presented. The present method could quan- titatively evaluate the cloaking effectiveness, and could open avenues for analyzing the cloaking effect, detecting the （anti-） cloaks, etc.展开更多
Novel properties and applications of multilayered nanowires(MNWs)urge researchers to understand their mechanical behaviors comprehensively.Using the molecular dynamic simulation,tensile behaviors of Ti/Ni MNWs are inv...Novel properties and applications of multilayered nanowires(MNWs)urge researchers to understand their mechanical behaviors comprehensively.Using the molecular dynamic simulation,tensile behaviors of Ti/Ni MNWs are investigated under a series of layer thickness values(1.31,2.34,and 7.17 nm)and strain rates(1.0×10^(8)s^(-1)≤ε≤5.0×10^(10)s^(-1)).The results demonstrate that deformation mechanisms of isopachous Ti/Ni MNWs are determined by the layer thickness and strain rate.Four distinct strain rate regions in the tensile process can be discovered,which are small,intermediate,critical,and large strain rate regions.As the strain rate increases,the initial plastic behaviors transform from interface shear(the shortest sample)and grain reorientation(the longest sample)in small strain rate region to amorphization of crystalline structures(all samples)in large strain rate region.Microstructure evolutions reveal that the disparate tensile behaviors are ascribed to the atomic fractions of different structures in small strain rate region,and only related to collapse of crystalline atoms in high strain rate region.A layer thickness-strain rate-dependent mechanism diagram is given to illustrate the couple effect on the plastic deformation mechanisms of the isopachous nanowires.The results also indicate that the modulation ratio significantly affects the tensile properties of unequal Ti/Ni MNWs,but barely affect the plastic deformation mechanisms of the materials.The observations from this work will promote theoretical researches and practical applications of Ti/Ni MNWs.展开更多
Pile foundations are still the preferred foundation system for high-rise structures in earthquake-prone regions.Pile foundations have experienced failures in past earthquakes due to liquefaction.Research on pile found...Pile foundations are still the preferred foundation system for high-rise structures in earthquake-prone regions.Pile foundations have experienced failures in past earthquakes due to liquefaction.Research on pile foundations in liquefiable soils has primarily focused on the pile foundation behavior in two or three-layered soil profiles.However,in natural occurrence,it may occur in alternative layers of liquefiable and non-liquefiable soil.However,the experimental and/or numerical studies on the layered effect on pile foundations have not been widely addressed in the literature.Most of the design codes across the world do not explicitly mention the effect of sandwiched non-liquefiable soil layers on the pile response.In the present study,the behavior of an end-bearing pile in layered liquefiable and non-liquefiable soil deposit is studied numerically.This study found that the kinematic bending moment is higher and governs the design when the effect of the sandwiched non-liquefied layer is considered in the analysis as opposed to when its effect is ignored.Therefore,ignoring the effect of the sandwiched non-liquefied layer in a liquefiable soil deposit might be a nonconservative design approach.展开更多
A decay function for the layering effect during the projectile penetrating into layered targets is constructed, which is obtained via the theoretical solution of a dynamically expanding layered spherical cavity with f...A decay function for the layering effect during the projectile penetrating into layered targets is constructed, which is obtained via the theoretical solution of a dynamically expanding layered spherical cavity with finite radius in the layered targets that are assumed to be incom- pressible Mohr-Coulomb materials. By multiplying the decay function with the semi-empirical forcing functions that account for all the constitutive behavior of the targets, the forcing functions for the layered targets are obtained. Then, the forcing functions are used to represent the targets and are applied on the projectile surface as the pressure boundary condition where the projectile is modeled by an explicit transient dynamic finite element code. This methodology is implemented into ABAQUS explicit solver via the user subroutine VDLOAD, which eliminates the need for discretizing the targets and the need for the complex contact algorithm. In order to verify the proposed layering effect model, depth-of-penetration experiments of the 37 mm hard core pro-jectile penetrating into three sets of fiber concrete and soil layered targets are conducted. The predicted depths of penetration show good agreement with the experimental data. Furthermore, the influence of layering effect on projectile trajectory during earth penetration is investigated. It is found that the layering effect should be taken into account if the final position and trajectory of the projectile are the main concern.展开更多
One important mission of the strategic defense is to develop an integrated, layered ballistic missile defense system（BMDS）. Considering the problem of assigning limited defense weapons to incoming ballistic missiles...One important mission of the strategic defense is to develop an integrated, layered ballistic missile defense system（BMDS）. Considering the problem of assigning limited defense weapons to incoming ballistic missiles, we illustrate how defense weapons, ballistic missiles, kill probability and effectiveness of defense（ED） are interrelated and how to understand this relationship for achieving the best allocation plan. Motivated by the queueing theory, in which the available resources are not sufficient to satisfy the demands placed upon them at all times, the layered deployed defense weapon is modeled as a queueing system to shoot Poisson arrived targets. Simultaneously, examples, of optimum intercepts allocation problems under different constraints are presented. The four theorems determine the allocation rules of intercepts to targets that maximize ED or minimize the cost to achieve a required ED.展开更多
The effect of oxygen partial pressure （Po2） during the channel layer deposition on bias stability of amorphous indium-gallium-zinc oxide （a-IGZO） thin film transistors （TFTs） is investigated. As Po2 increases fr...The effect of oxygen partial pressure （Po2） during the channel layer deposition on bias stability of amorphous indium-gallium-zinc oxide （a-IGZO） thin film transistors （TFTs） is investigated. As Po2 increases from 10% to 30%, it is found that the device shows enhanced bias stress stability with significantly reduced threshold voltage drift under positive gate bias stress. Based on the x-ray photoelectron spectroscopy measurement, the concentration of oxygen vacancies （Or） within the a-IGZO layer is suppressed by increasing Po2. Meanwhile, the low-frequency noise analysis indicates that the average trap density near the channel/dielectric interface continuously drops with increasing Po2. Therefore, the improved interface quality with increasing Po2 during the channel layer deposition can be attributed to the reduction of interface Ov-related defects, which agrees with the enhanced bias stress stability of the a-IGZO TFTs.展开更多
Simultaneous impedance analysis of three one-face sealed resonating piezoelectric quartz crystals (PQCs) in parallel is proposed through admittance measurements of the three PQCs on one impedance analyzer and then non...Simultaneous impedance analysis of three one-face sealed resonating piezoelectric quartz crystals (PQCs) in parallel is proposed through admittance measurements of the three PQCs on one impedance analyzer and then non-linear fitting according to the parallel combination of three Butterworth-Van Dyke circuits. Responses of each PQC obtained from the three-PQC mode agreed well with those measured separately in series sucrose aqueous solutions. This novel method has been used for the study of depletion-layer effect during ferri-/ferrocyanide electrochemical reactions.展开更多
From different reports, it （AZO） and indium-doped including usage areas. We nanocrystalline films with is realized that there is a need to consider all sides of aluminum-doped zinc oxide zinc oxide （IZO） thin film...From different reports, it （AZO） and indium-doped including usage areas. We nanocrystalline films with is realized that there is a need to consider all sides of aluminum-doped zinc oxide zinc oxide （IZO） thin films with their optical, luminescence and surface properties establish an assessment to carry out further information to summarize AZO and IZO impact of the layer number.展开更多
Magma is generated mostly in the Earth’s mantle by decompression melting and transported through the crust to reach the Earth’s surface.The main mechanism for magma transport is diking,but the pathways taken by
Current-voltage electrical characteristics of Er silicide/Si（001） nanocontacts are measured in situ in a scanning tunneling microscopy system. Introduced as a new technique to suppress surface leakage conduction on...Current-voltage electrical characteristics of Er silicide/Si（001） nanocontacts are measured in situ in a scanning tunneling microscopy system. Introduced as a new technique to suppress surface leakage conduction on Si（001）,a silver wetting layer is evaporated onto the substrate surface kept at room temperature with Er Si2 nanoislands already existing. The effects of the silver layer on the current-voltage characteristics of nanocontacts are discussed.Our experimental results reveal that the silver layer at coverage of 0.4–0.7 monolayer can suppress effectively the current contribution from the surface conduction path. After the surface leakage path of nanocontacts is obstructed, the ideality factor and the Schottky barrier height are determined using the thermionic emission theory, about 2 and 0.5 eV, respectively. The approach adopted here could shed light on the intrinsic transport properties of metal-semiconductor nanocontacts.展开更多
The deposition of high-quality diamond films and their adhesion on cemented carbides are strongly influenced by the catalytic effect of cobalt under typical deposition conditions. Decreasing Co content on the surface...The deposition of high-quality diamond films and their adhesion on cemented carbides are strongly influenced by the catalytic effect of cobalt under typical deposition conditions. Decreasing Co content on the surface of the cemented carbide is often used for the diamond film deposition. But the leaching of Co from the WC-Co substrate leading to a mechanical weak surface often causes a poor adhesion. In this paper we adopted an implant copper layer prepared by vaporization to improve the mechanical properties of the Co-leached substrate. The diamond films were grown by microwave plasma chemical vapor deposition from CH4:H2 gas mixture. The cross section and the morphology of the diamond film were characterized by scanning electron microscopy (SEM). The non-diamond content in the film was analyzed by Raman spectroscopy. The effects of pretreatment on the concentrations of Co and Cu near the interfacial region were examined by energy dispersive spectrum (EDS) equipped with SEM. The adhesion of the diamond on the substrate was evaluated with a Rockwell-type hardness tester. The results indicate that the diamond films prepared with implant copper layer have a good adhesion to the cemented carbide substrate due to the recovery of the mechanical properties of the Co-depleted substrate after the copper implantation and the formation of less amorphous carbon between the substrate and the diamond film.展开更多
To study the influence of CoFeB/MgO interface on tunneling magnetoresistance （TMR）, different structures of magnetic tunnel junctions （MTJs） are successfully prepared by the magnetron sputtering technique and char...To study the influence of CoFeB/MgO interface on tunneling magnetoresistance （TMR）, different structures of magnetic tunnel junctions （MTJs） are successfully prepared by the magnetron sputtering technique and characterized by atomic force microscopy, a physical property measurement system, x-ray photoelectron spectroscopy, and transmission electron microscopy. The experimental results show that TMR of the CoFeB/Mg/MgO/CoFeB structure is evidently improved in comparison with the CoFeB/MgO/CoFeB structure because the inserted Mg layer prevents Fe-oxide formation at the CoFeB/MgO interface, which occurs in CoFeB/MgO/CoFeB MTJs. The inherent properties of the CoFeB/MgO/CoFeB, CoFeB/Fe-oxide/MgO/CoFeB and CoFeB/Mg/MgO/CoFeB MTJs are simulated by using the theories of density functions and non-equilibrium Green functions. The simulated results demonstrate that TMR of CoFeB/Fe-oxide/MgO/CoFeB MTJs is severely decreased and is only half the value of the CoFeB/Mg/MgO/CoFeB MTJs. Based on the experimental results and theoretical analysis, it is believed that in CoFeB/MgO/CoFeB MTJs, the interface oxidation of the CoFeB layer is the main reason to cause a remarkable reduction of TMR, and the inserted Mg layer may play an important role in protecting Fe atoms from oxidation, and then increasing TMR.展开更多
The objective of the present investigation is to predict the nonlinear buckling and postbuckling characteristics of cylindrical shear deformable nanoshells with and without initial imperfection under hydrostatic press...The objective of the present investigation is to predict the nonlinear buckling and postbuckling characteristics of cylindrical shear deformable nanoshells with and without initial imperfection under hydrostatic pressure load in the presence of surface free energy effects.To this end, Gurtin-Murdoch elasticity theory is implemented into the irst-order shear deformation shell theory to develop a size-dependent shell model which has an excellent capability to take surface free energy effects into account. A linear variation through the shell thickness is assumed for the normal stress component of the bulk to satisfy the equilibrium conditions on the surfaces of nanoshell. On the basis of variational approach and using von Karman-Donnell-type of kinematic nonlinearity, the non-classical governing differential equations are derived. Then a boundary layer theory of shell buckling is employed incorporating the effects of surface free energy in conjunction with nonlinear prebuckling deformations, large delections in the postbuckling domain and initial geometric imperfection. Finally, an eficient solution methodology based on a two-stepped singular perturbation technique is put into use in order to obtain the critical buckling loads and postbuckling equilibrium paths corresponding to various geometric parameters. It is demonstrated that the surface free energy effects cause increases in both the critical buckling pressure and critical end-shortening of a nanoshell made of silicon.展开更多
In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in...In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in the EBL after Mg-preflow treatment,effectively alleviating the commonly observed efficiency collapse and electrons overflowing at cryogenic temperatures.However,unexpected decline in quantum efficiency is observed after Mg-preflow treatment at room temperature.Our conclusions are drawn such that the efficiency decline is probably the result of different emission positions.Higher Mg doping concentration in the EBL after Mg-preflow treatment will make it easier for a hole to be injected into multiple quantum wells with emission closer to pGaN side through the（8-plane rather than the V-shape pits,which is not favorable to luminous efficiency due to the preferred occurrence of accumulated strain relaxation and structural defects in upper QWs closer to p-GaN.Within this framework,apparently disparate experimental observations regarding electroluminescence properties,in this work,are well reconciled.展开更多
1 Introduction In recent years porous carbons have been widely used in many fields such as energy storage(Mc Creery,2008;Liu et al,2009;Ho et al,2014;Yang et al,2015),adsorption,wastewater treatment,air purification
Based on the acoustic radiation theory of a dipole source, the influence of the transducer reception pattern is studied for magnetoacoustic tomography with magnetic induction（MAT-MI）. Numerical studies are conducted...Based on the acoustic radiation theory of a dipole source, the influence of the transducer reception pattern is studied for magnetoacoustic tomography with magnetic induction（MAT-MI）. Numerical studies are conducted to simulate acoustic pressures, waveforms, and reconstructed images with unidirectional, omnidirectional, and strong directional transducers.With the analyses of equivalent and projection sources, the influences of the model dimension and the layer effect are qualitatively analyzed to evaluate the performance of MAT-MI. Three-dimensional simulation studies show that the strong directional transducer with a large radius can reduce the influences of equivalent sources, projection sources, and the layer effect effectively, resulting in enhanced pressure and improved image contrast, which is beneficial for boundary pressure extraction in conductivity reconstruction. The reconstructed conductivity contrast images present the conductivity boundaries as stripes with different contrasts and polarities, representing the values and directions of the conductivity changes of the scanned layer. The favorable results provide solid evidence for transducer selection and suggest potential practical applications of MAT-MI in biomedical imaging.展开更多
In order to study the permeability and water-resisting ability of the strata on the top of the Ordovician in Longgu Coal Mine, this paper tested the permeability and porosity of the strata, investigated the fracture a...In order to study the permeability and water-resisting ability of the strata on the top of the Ordovician in Longgu Coal Mine, this paper tested the permeability and porosity of the strata, investigated the fracture and pore structure features of the strata, and identified the main channels which govern the permeability and water-resisting ability of the strata. The permeability of the upper, central and lower strata shows as 2.0504 × 10^-3-2.782762× 10^-3, 4.1092 × 10^-3 -7.3387 × 10^-3 and 2.0891 ×10^-3-3.2705 × 10-3 μm^2, respectively, and porosity of that is 0.6786-0.9197%, 0.3109-0.3951% and 0.9829-1.8655%, respectively. The results indicate that： （I） the main channels of the relative water-resisting layer are the pore throats with a diameter more than 6 μm; （2） the major proportion of pore throats in the vertical flow channel and the permeability first increases and then sharply decreases; （3） the fractures occurring from the top to 20 m in depth of the strata were filled and there occurred almost no fracture under the depth of 40 m; and （4） the ratio of turning point of the main flow channel in the strata on top of Ordovician can be used to confirm the thickness of filled water-resisting lavers.展开更多
The performance of an electrocatalyst, which is needed e.g. for key energy conversion reactions such as hydrogen evolution, oxygen reduction or CO2 reduction, is determined not only by the inherent structure of active...The performance of an electrocatalyst, which is needed e.g. for key energy conversion reactions such as hydrogen evolution, oxygen reduction or CO2 reduction, is determined not only by the inherent structure of active sites but also by the properties of the interfacial structures at catalytic surfaces. Ionic liquids（ILs）, as a unique class of metal salts with melting point below 100 ℃, present themselves as ideal modulators for manipulations of the interfacial structures. Due to their excellent properties such as good chemical stability, high ionic conductivity, wide electrochemical windows and tunable solvent properties the performance of electrocatalysts can be substantially improved through ILs. In the current minireview, we highlight the critical role of the IL phase at the microenvironments created by the IL, the liquid electrolyte, catalytic nanoparticles and/or support materials, by detailing the promotional effect of IL in electrocatalysis as reaction media, binders, and surface modifiers. Updated exemplary applications of IL in electrocatalysis are given and moreover, the latest developments of IL modified electrocatalysts following the ＂Solid Catalyst with Ionic Liquid Layer（SCILL）＂ concept are presented.展开更多
Three-dimensional simulations of diesel particulate matter （DPM） distribution inside a single straight entry for the Load-Haul-Dump loader （LHD）-truck loading and truck hauling operations were conducted by using A...Three-dimensional simulations of diesel particulate matter （DPM） distribution inside a single straight entry for the Load-Haul-Dump loader （LHD）-truck loading and truck hauling operations were conducted by using ANSYS FLUENT computational fluid dynamics software. The loading operation was performed for a fixed period of 3 min. The dynamic mesh technique in FLUENT was used to study the impact of truck motion on DPM distribution. The resultant DPM distributions are presented for the cases when the truck were driving upstream and downstream of the loading face. Interesting phenomena were revealed in the study including the piston effect, layering of DPM in the roof region, and backflow of diesel exhaust against ventilation. The results from the simulation can be used to determine if the areas inside the face area and straight entry exceed the current U.S. regulatory requirement for DPM concentration （〉160 pg/m3）. This research can guide the selection of DPM reduction strategies and improve the working practices for the underground miners.展开更多
In order to understand the characteristics of breakdown process,plasma evolution and spectral emission in liquid jets laser-induced breakdown spectroscopy methods under the influence of the position variation between ...In order to understand the characteristics of breakdown process,plasma evolution and spectral emission in liquid jets laser-induced breakdown spectroscopy methods under the influence of the position variation between laser focus and gas–liquid interface,this work takes the plasma generated by laser-induced liquid jets as the object of study and discusses the changes in the spatial and temporal evolution characteristics and spectral radiation of the plasma when the position parameters between the laser focal point and the gas–liquid interface are different.The initial breakdown position is always between the front interface and the focus when the laser focus moves along the vertical direction of the interface,forming a phenomenon like’interface effect’.The relationship between laser pulse energy and breakdown probability exhibits a law similar to a‘hysteresis curve’in the study of breakdown threshold.In this work,plasma with smaller size,rounder shape,stronger radiation,higher temperature,and higher density can be produced when the focus position is in the liquid column 0.2 mm away from the front interface.Simultaneously,the spectral signal intensity and signal-to-back ratio of the characteristic peaks of target elements in water reach maximum values,and the spectral signal becomes more stable(relative standard deviation value reaches 2%).The Ca element’s ion radiation at 393.366 nm and atomic radiation at 422.673 nm are studied using narrow-band filtering imaging and time-space resolution spectroscopy.The findings demonstrate that the laws of ion and atomic radiation are not perfectly consistent in space and time.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 51576078 and 51376070
文摘The concentrically layered thermal cloaks with isotropic materials could realize the equivalent thermal cloaking effect with Pendry＇s cloak, while the effectiveness is scarcely investigated quantitatively. Here we examine the cloaking effectiveness quantitatively by evaluating the standard deviation of the temperature difference between the simulated plane with the layered thermal cloak and Pendry＇s thermal cloak. The design rules for the isotropic materials in terms of thermal conductivity and layer thickness are presented. The present method could quan- titatively evaluate the cloaking effectiveness, and could open avenues for analyzing the cloaking effect, detecting the （anti-） cloaks, etc.
基金Project supported by the National Natural Science Foundation of China(Grant No.11572259)the Natural Science Foundation of Shaanxi Province,China(Grant No.2019JQ-827)the Scientific Research Program Funded by Shaanxi Provincial Education Department,China(Grant No.19JK0672).
文摘Novel properties and applications of multilayered nanowires(MNWs)urge researchers to understand their mechanical behaviors comprehensively.Using the molecular dynamic simulation,tensile behaviors of Ti/Ni MNWs are investigated under a series of layer thickness values(1.31,2.34,and 7.17 nm)and strain rates(1.0×10^(8)s^(-1)≤ε≤5.0×10^(10)s^(-1)).The results demonstrate that deformation mechanisms of isopachous Ti/Ni MNWs are determined by the layer thickness and strain rate.Four distinct strain rate regions in the tensile process can be discovered,which are small,intermediate,critical,and large strain rate regions.As the strain rate increases,the initial plastic behaviors transform from interface shear(the shortest sample)and grain reorientation(the longest sample)in small strain rate region to amorphization of crystalline structures(all samples)in large strain rate region.Microstructure evolutions reveal that the disparate tensile behaviors are ascribed to the atomic fractions of different structures in small strain rate region,and only related to collapse of crystalline atoms in high strain rate region.A layer thickness-strain rate-dependent mechanism diagram is given to illustrate the couple effect on the plastic deformation mechanisms of the isopachous nanowires.The results also indicate that the modulation ratio significantly affects the tensile properties of unequal Ti/Ni MNWs,but barely affect the plastic deformation mechanisms of the materials.The observations from this work will promote theoretical researches and practical applications of Ti/Ni MNWs.
基金The Ministry of Education,Government of India,for the financial assistance provided during the research work。
文摘Pile foundations are still the preferred foundation system for high-rise structures in earthquake-prone regions.Pile foundations have experienced failures in past earthquakes due to liquefaction.Research on pile foundations in liquefiable soils has primarily focused on the pile foundation behavior in two or three-layered soil profiles.However,in natural occurrence,it may occur in alternative layers of liquefiable and non-liquefiable soil.However,the experimental and/or numerical studies on the layered effect on pile foundations have not been widely addressed in the literature.Most of the design codes across the world do not explicitly mention the effect of sandwiched non-liquefiable soil layers on the pile response.In the present study,the behavior of an end-bearing pile in layered liquefiable and non-liquefiable soil deposit is studied numerically.This study found that the kinematic bending moment is higher and governs the design when the effect of the sandwiched non-liquefied layer is considered in the analysis as opposed to when its effect is ignored.Therefore,ignoring the effect of the sandwiched non-liquefied layer in a liquefiable soil deposit might be a nonconservative design approach.
基金supported by the National Natural Science Foundation of China(Nos.51321064 and 51378015)
文摘A decay function for the layering effect during the projectile penetrating into layered targets is constructed, which is obtained via the theoretical solution of a dynamically expanding layered spherical cavity with finite radius in the layered targets that are assumed to be incom- pressible Mohr-Coulomb materials. By multiplying the decay function with the semi-empirical forcing functions that account for all the constitutive behavior of the targets, the forcing functions for the layered targets are obtained. Then, the forcing functions are used to represent the targets and are applied on the projectile surface as the pressure boundary condition where the projectile is modeled by an explicit transient dynamic finite element code. This methodology is implemented into ABAQUS explicit solver via the user subroutine VDLOAD, which eliminates the need for discretizing the targets and the need for the complex contact algorithm. In order to verify the proposed layering effect model, depth-of-penetration experiments of the 37 mm hard core pro-jectile penetrating into three sets of fiber concrete and soil layered targets are conducted. The predicted depths of penetration show good agreement with the experimental data. Furthermore, the influence of layering effect on projectile trajectory during earth penetration is investigated. It is found that the layering effect should be taken into account if the final position and trajectory of the projectile are the main concern.
基金supported by the Military Graduate Student Foundation of Army
文摘One important mission of the strategic defense is to develop an integrated, layered ballistic missile defense system（BMDS）. Considering the problem of assigning limited defense weapons to incoming ballistic missiles, we illustrate how defense weapons, ballistic missiles, kill probability and effectiveness of defense（ED） are interrelated and how to understand this relationship for achieving the best allocation plan. Motivated by the queueing theory, in which the available resources are not sufficient to satisfy the demands placed upon them at all times, the layered deployed defense weapon is modeled as a queueing system to shoot Poisson arrived targets. Simultaneously, examples, of optimum intercepts allocation problems under different constraints are presented. The four theorems determine the allocation rules of intercepts to targets that maximize ED or minimize the cost to achieve a required ED.
基金Supported by the National Basic Research Program of China under Grant Nos 2010CB327504,2011CB922100 and2011CB301900the National Natural Science Foundation of China under Grant Nos 11104130 and 61322112+2 种基金the Natural Science Foundation of Jiangsu Province under Grant Nos BK2011556 and BK2011050the Priority Academic Program Development of Jiangsu Higher Education Institutionsand the NUPTSF Grant Nos NY213069 and NY214028
文摘The effect of oxygen partial pressure （Po2） during the channel layer deposition on bias stability of amorphous indium-gallium-zinc oxide （a-IGZO） thin film transistors （TFTs） is investigated. As Po2 increases from 10% to 30%, it is found that the device shows enhanced bias stress stability with significantly reduced threshold voltage drift under positive gate bias stress. Based on the x-ray photoelectron spectroscopy measurement, the concentration of oxygen vacancies （Or） within the a-IGZO layer is suppressed by increasing Po2. Meanwhile, the low-frequency noise analysis indicates that the average trap density near the channel/dielectric interface continuously drops with increasing Po2. Therefore, the improved interface quality with increasing Po2 during the channel layer deposition can be attributed to the reduction of interface Ov-related defects, which agrees with the enhanced bias stress stability of the a-IGZO TFTs.
文摘Simultaneous impedance analysis of three one-face sealed resonating piezoelectric quartz crystals (PQCs) in parallel is proposed through admittance measurements of the three PQCs on one impedance analyzer and then non-linear fitting according to the parallel combination of three Butterworth-Van Dyke circuits. Responses of each PQC obtained from the three-PQC mode agreed well with those measured separately in series sucrose aqueous solutions. This novel method has been used for the study of depletion-layer effect during ferri-/ferrocyanide electrochemical reactions.
文摘From different reports, it （AZO） and indium-doped including usage areas. We nanocrystalline films with is realized that there is a need to consider all sides of aluminum-doped zinc oxide zinc oxide （IZO） thin films with their optical, luminescence and surface properties establish an assessment to carry out further information to summarize AZO and IZO impact of the layer number.
文摘Magma is generated mostly in the Earth’s mantle by decompression melting and transported through the crust to reach the Earth’s surface.The main mechanism for magma transport is diking,but the pathways taken by
基金Supported by the National Natural Science Foundation of China under Grant No 11374058
文摘Current-voltage electrical characteristics of Er silicide/Si（001） nanocontacts are measured in situ in a scanning tunneling microscopy system. Introduced as a new technique to suppress surface leakage conduction on Si（001）,a silver wetting layer is evaporated onto the substrate surface kept at room temperature with Er Si2 nanoislands already existing. The effects of the silver layer on the current-voltage characteristics of nanocontacts are discussed.Our experimental results reveal that the silver layer at coverage of 0.4–0.7 monolayer can suppress effectively the current contribution from the surface conduction path. After the surface leakage path of nanocontacts is obstructed, the ideality factor and the Schottky barrier height are determined using the thermionic emission theory, about 2 and 0.5 eV, respectively. The approach adopted here could shed light on the intrinsic transport properties of metal-semiconductor nanocontacts.
文摘The deposition of high-quality diamond films and their adhesion on cemented carbides are strongly influenced by the catalytic effect of cobalt under typical deposition conditions. Decreasing Co content on the surface of the cemented carbide is often used for the diamond film deposition. But the leaching of Co from the WC-Co substrate leading to a mechanical weak surface often causes a poor adhesion. In this paper we adopted an implant copper layer prepared by vaporization to improve the mechanical properties of the Co-leached substrate. The diamond films were grown by microwave plasma chemical vapor deposition from CH4:H2 gas mixture. The cross section and the morphology of the diamond film were characterized by scanning electron microscopy (SEM). The non-diamond content in the film was analyzed by Raman spectroscopy. The effects of pretreatment on the concentrations of Co and Cu near the interfacial region were examined by energy dispersive spectrum (EDS) equipped with SEM. The adhesion of the diamond on the substrate was evaluated with a Rockwell-type hardness tester. The results indicate that the diamond films prepared with implant copper layer have a good adhesion to the cemented carbide substrate due to the recovery of the mechanical properties of the Co-depleted substrate after the copper implantation and the formation of less amorphous carbon between the substrate and the diamond film.
基金Supported by the National Defense Advance Research Foundation under Grant No 9140A08XXXXXX0DZ106the Basic Research Program of Ministry of Education of China under Grant No JY10000925005+2 种基金the Scientific Research Program Funded by Shaanxi Provincial Education Department under Grant No 11JK0912the Scientific Research Foundation of Xi'an University of Science and Technology under Grant No 2010011the Doctoral Research Startup Fund of Xi'an University of Science and Technology under Grant No 2010QDJ029
文摘To study the influence of CoFeB/MgO interface on tunneling magnetoresistance （TMR）, different structures of magnetic tunnel junctions （MTJs） are successfully prepared by the magnetron sputtering technique and characterized by atomic force microscopy, a physical property measurement system, x-ray photoelectron spectroscopy, and transmission electron microscopy. The experimental results show that TMR of the CoFeB/Mg/MgO/CoFeB structure is evidently improved in comparison with the CoFeB/MgO/CoFeB structure because the inserted Mg layer prevents Fe-oxide formation at the CoFeB/MgO interface, which occurs in CoFeB/MgO/CoFeB MTJs. The inherent properties of the CoFeB/MgO/CoFeB, CoFeB/Fe-oxide/MgO/CoFeB and CoFeB/Mg/MgO/CoFeB MTJs are simulated by using the theories of density functions and non-equilibrium Green functions. The simulated results demonstrate that TMR of CoFeB/Fe-oxide/MgO/CoFeB MTJs is severely decreased and is only half the value of the CoFeB/Mg/MgO/CoFeB MTJs. Based on the experimental results and theoretical analysis, it is believed that in CoFeB/MgO/CoFeB MTJs, the interface oxidation of the CoFeB layer is the main reason to cause a remarkable reduction of TMR, and the inserted Mg layer may play an important role in protecting Fe atoms from oxidation, and then increasing TMR.
文摘The objective of the present investigation is to predict the nonlinear buckling and postbuckling characteristics of cylindrical shear deformable nanoshells with and without initial imperfection under hydrostatic pressure load in the presence of surface free energy effects.To this end, Gurtin-Murdoch elasticity theory is implemented into the irst-order shear deformation shell theory to develop a size-dependent shell model which has an excellent capability to take surface free energy effects into account. A linear variation through the shell thickness is assumed for the normal stress component of the bulk to satisfy the equilibrium conditions on the surfaces of nanoshell. On the basis of variational approach and using von Karman-Donnell-type of kinematic nonlinearity, the non-classical governing differential equations are derived. Then a boundary layer theory of shell buckling is employed incorporating the effects of surface free energy in conjunction with nonlinear prebuckling deformations, large delections in the postbuckling domain and initial geometric imperfection. Finally, an eficient solution methodology based on a two-stepped singular perturbation technique is put into use in order to obtain the critical buckling loads and postbuckling equilibrium paths corresponding to various geometric parameters. It is demonstrated that the surface free energy effects cause increases in both the critical buckling pressure and critical end-shortening of a nanoshell made of silicon.
基金Supported by the National Key R&D Program of China under Grant Nos 2016YFB0400600 and 2016YFB0400601the State Key Program of the National Natural Science of China under Grant No 61334001+2 种基金the Key R&D Program of Jiangxi Province under Grant No 20165ABC28007the Natural Science Foundation of Jiangxi Province under Grant No 20151BAB207053the National Natural Science Foundation of China under Grant No 21405076
文摘In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in the EBL after Mg-preflow treatment,effectively alleviating the commonly observed efficiency collapse and electrons overflowing at cryogenic temperatures.However,unexpected decline in quantum efficiency is observed after Mg-preflow treatment at room temperature.Our conclusions are drawn such that the efficiency decline is probably the result of different emission positions.Higher Mg doping concentration in the EBL after Mg-preflow treatment will make it easier for a hole to be injected into multiple quantum wells with emission closer to pGaN side through the（8-plane rather than the V-shape pits,which is not favorable to luminous efficiency due to the preferred occurrence of accumulated strain relaxation and structural defects in upper QWs closer to p-GaN.Within this framework,apparently disparate experimental observations regarding electroluminescence properties,in this work,are well reconciled.
基金financial support from the National Natural Science Foundation of China (51274015)National Program on Key Basic Research Project (973 Program) (2014CB846000)Test Fund of Peking University
文摘1 Introduction In recent years porous carbons have been widely used in many fields such as energy storage(Mc Creery,2008;Liu et al,2009;Ho et al,2014;Yang et al,2015),adsorption,wastewater treatment,air purification
基金Project supported by the National Basic Research Program of China(Grant No.2011CB707900)the National Natural Science Foundation of China(Grant Nos 11274176 and 11474166)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Based on the acoustic radiation theory of a dipole source, the influence of the transducer reception pattern is studied for magnetoacoustic tomography with magnetic induction（MAT-MI）. Numerical studies are conducted to simulate acoustic pressures, waveforms, and reconstructed images with unidirectional, omnidirectional, and strong directional transducers.With the analyses of equivalent and projection sources, the influences of the model dimension and the layer effect are qualitatively analyzed to evaluate the performance of MAT-MI. Three-dimensional simulation studies show that the strong directional transducer with a large radius can reduce the influences of equivalent sources, projection sources, and the layer effect effectively, resulting in enhanced pressure and improved image contrast, which is beneficial for boundary pressure extraction in conductivity reconstruction. The reconstructed conductivity contrast images present the conductivity boundaries as stripes with different contrasts and polarities, representing the values and directions of the conductivity changes of the scanned layer. The favorable results provide solid evidence for transducer selection and suggest potential practical applications of MAT-MI in biomedical imaging.
基金Financial supports for this work provided by the National Basic Research Program of China(2013CB227900)the Innovation of Graduate Student Training Project in Jiangsu Province of China(CXZZ13_0934)
文摘In order to study the permeability and water-resisting ability of the strata on the top of the Ordovician in Longgu Coal Mine, this paper tested the permeability and porosity of the strata, investigated the fracture and pore structure features of the strata, and identified the main channels which govern the permeability and water-resisting ability of the strata. The permeability of the upper, central and lower strata shows as 2.0504 × 10^-3-2.782762× 10^-3, 4.1092 × 10^-3 -7.3387 × 10^-3 and 2.0891 ×10^-3-3.2705 × 10-3 μm^2, respectively, and porosity of that is 0.6786-0.9197%, 0.3109-0.3951% and 0.9829-1.8655%, respectively. The results indicate that： （I） the main channels of the relative water-resisting layer are the pore throats with a diameter more than 6 μm; （2） the major proportion of pore throats in the vertical flow channel and the permeability first increases and then sharply decreases; （3） the fractures occurring from the top to 20 m in depth of the strata were filled and there occurred almost no fracture under the depth of 40 m; and （4） the ratio of turning point of the main flow channel in the strata on top of Ordovician can be used to confirm the thickness of filled water-resisting lavers.
基金supported by the funding of the German Research Council (DFG), which, within the framework of its Excellence Initiative, supports the Cluster of Excellence “Engineering of Advanced Materials” (www.eam.uni-erlangen.de) at the University of Erlangen-Nürnberg
文摘The performance of an electrocatalyst, which is needed e.g. for key energy conversion reactions such as hydrogen evolution, oxygen reduction or CO2 reduction, is determined not only by the inherent structure of active sites but also by the properties of the interfacial structures at catalytic surfaces. Ionic liquids（ILs）, as a unique class of metal salts with melting point below 100 ℃, present themselves as ideal modulators for manipulations of the interfacial structures. Due to their excellent properties such as good chemical stability, high ionic conductivity, wide electrochemical windows and tunable solvent properties the performance of electrocatalysts can be substantially improved through ILs. In the current minireview, we highlight the critical role of the IL phase at the microenvironments created by the IL, the liquid electrolyte, catalytic nanoparticles and/or support materials, by detailing the promotional effect of IL in electrocatalysis as reaction media, binders, and surface modifiers. Updated exemplary applications of IL in electrocatalysis are given and moreover, the latest developments of IL modified electrocatalysts following the ＂Solid Catalyst with Ionic Liquid Layer（SCILL）＂ concept are presented.
文摘Three-dimensional simulations of diesel particulate matter （DPM） distribution inside a single straight entry for the Load-Haul-Dump loader （LHD）-truck loading and truck hauling operations were conducted by using ANSYS FLUENT computational fluid dynamics software. The loading operation was performed for a fixed period of 3 min. The dynamic mesh technique in FLUENT was used to study the impact of truck motion on DPM distribution. The resultant DPM distributions are presented for the cases when the truck were driving upstream and downstream of the loading face. Interesting phenomena were revealed in the study including the piston effect, layering of DPM in the roof region, and backflow of diesel exhaust against ventilation. The results from the simulation can be used to determine if the areas inside the face area and straight entry exceed the current U.S. regulatory requirement for DPM concentration （〉160 pg/m3）. This research can guide the selection of DPM reduction strategies and improve the working practices for the underground miners.
基金supported by Natural Science Foundation of Shandong Province(Nos.ZR201910290171 and ZR2019MD 016)National Key Research and Development Program of China(No.2016YFC0302101)National Natural Science Foundation of China(No.41976173)。
文摘In order to understand the characteristics of breakdown process,plasma evolution and spectral emission in liquid jets laser-induced breakdown spectroscopy methods under the influence of the position variation between laser focus and gas–liquid interface,this work takes the plasma generated by laser-induced liquid jets as the object of study and discusses the changes in the spatial and temporal evolution characteristics and spectral radiation of the plasma when the position parameters between the laser focal point and the gas–liquid interface are different.The initial breakdown position is always between the front interface and the focus when the laser focus moves along the vertical direction of the interface,forming a phenomenon like’interface effect’.The relationship between laser pulse energy and breakdown probability exhibits a law similar to a‘hysteresis curve’in the study of breakdown threshold.In this work,plasma with smaller size,rounder shape,stronger radiation,higher temperature,and higher density can be produced when the focus position is in the liquid column 0.2 mm away from the front interface.Simultaneously,the spectral signal intensity and signal-to-back ratio of the characteristic peaks of target elements in water reach maximum values,and the spectral signal becomes more stable(relative standard deviation value reaches 2%).The Ca element’s ion radiation at 393.366 nm and atomic radiation at 422.673 nm are studied using narrow-band filtering imaging and time-space resolution spectroscopy.The findings demonstrate that the laws of ion and atomic radiation are not perfectly consistent in space and time.
