A laser coherent detection system of 1550 nm wavelength was presented, and experimen- tal research on detecting micro-Doppler effect in a dynamic target was developed. In the study, the return signal in the time domai...A laser coherent detection system of 1550 nm wavelength was presented, and experimen- tal research on detecting micro-Doppler effect in a dynamic target was developed. In the study, the return signal in the time domain is decomposed into a set of components in different wavelet scales by multi-resolution wavelet analysis, and the components are associated with the vibrational motions in a target. Then micro-Doppler signatures are extracted by applying the reconstruction. During the course of the final data processing frequency analysis and time-frequency analysis are applied to analyze the vibrationM signals and estimate the motion parameters successfully. The experimental results indicate that the system can effectively detect micro-Doppler information in a moving target, and the tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analy- sis and time-frequency analysis.展开更多
Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective ...Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective of this review was to assess the current state of knowledge available on the thermal effects of lasers in lithotripsy,as well as explore any new areas where studies are needed.Methods In August 2022,a keyword search on Google Scholar,PubMed,and Scopus for all papers containing the phrases“thermal effects”AND“laser”AND“lithotripsy”AND“urology”was done followed by citation jumping to other studies pertaining to the topic and 35 relevant papers were included in our study.The data from relevant papers were segregated into five groups according to the factor studied and type of study,and tables were created for a comparison of data.Results Temperature above the threshold of 43℃ was reached only when the power was>40 W and when there was adequate irrigation(at least 15–30 mL/min).Shorter lasing time divided by lithotripsy time or operator duty cycles less than 70%also resulted in a smaller temperature rise.Conclusion At least eight factors modify the thermal effects of lasers,and most importantly,the use of chilled irrigation at higher perfusion rates,lower power settings of<40 W,and with a shorter operator duty cycle will help to prevent thermal injuries from occurring.Stones impacted in the ureter or pelvi-ureteric junction further increase the probability of thermal injuries during laser firing.展开更多
During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configura...During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.展开更多
Introduction:Surgeons typically prefer 270μm and 272μm laser probes in retrograde intrarenal surgery(RIRS)due to the reduced deflection capacity of flexible ureterorenoscopes when using larger probe diameters.This s...Introduction:Surgeons typically prefer 270μm and 272μm laser probes in retrograde intrarenal surgery(RIRS)due to the reduced deflection capacity of flexible ureterorenoscopes when using larger probe diameters.This study aims to investigate the effects of 272 and 365μm holmium laser probes on operative time,clinical efficacy,and complication rates in RIRS.Materials and Methods:A total of 285 patients with proximal ureteral or kidney stones who met the inclusion criteria were enrolled in the study.Patients were divided into two groups based on laser probe thickness:272μm and 365μm.Stone-free rates,operative time,and complication rates were compared between the groups.Factors affecting stone-free rates were analyzed using multivariate logistic regression analysis.Results:Patient and stone characteristics were similar between the two groups.No significant differences were found in stone-free or complication rates.However,operative time was significantly shorter in the 365μm probe group.In univariate analysis,risk factors for postoperative residual stones included multi-calyceal stones,lower pole stones,high Hounsfield unit(HU)values on noncontrast computed tomography,and larger stone size.In multivariate analysis,independent prognostic factors for residual stones were identified as multi-calycal stones,lower pole stones,and high HU values.Conclusion:Compared to 272μm laser probes,operative time was shorter in surgeries performed with 365μm laser probes.The 365μm holmium laser can be effectively and safely used in the treatment of proximal ureteral and renal stones,demonstrating high clinical efficacy and safety.展开更多
The emergence of laser technology has led to the gradual integration of laser weapon system(LaWS)into military scene,particularly in the field of anti-unmanned aerial vehicle(UAV),showcasing significant potential.Howe...The emergence of laser technology has led to the gradual integration of laser weapon system(LaWS)into military scene,particularly in the field of anti-unmanned aerial vehicle(UAV),showcasing significant potential.However,A current limitation lies in the absence of a comprehensive quantitative approach to assess the capabilities of LaWS.To address this issue,a damage effectiveness characterization model for LaWS is established,taking into account the properties of laser transmission through the atmosphere and the thermal damage effects.By employing this model,key parameters pertaining to the effectiveness of laser damage are determined.The impact of various spatial positions and atmospheric conditions on the damage effectiveness of LaWS have been examined,employing simulation experiments with diverse parameters.The conclusions indicate that the damage effectiveness of LaWS is contingent upon the spatial position of the target,resulting in a diminished effectiveness to damage on distant,low-altitude targets.Additionally,the damage effectiveness of LaWS is heavily reliant on the atmospheric condition,particularly in complex settings such as midday and low visibility conditions,where the damage effectiveness is substantially reduced.This paper provides an accurate and effective calculation method for the rapid decisionmaking of the operators.展开更多
Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by com...Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by completely removing the material from the ablation region within the release material layer at high energy densities.However,this R/R separation method often results in a significant amount of release material and carbonized debris remaining on the surface of the device wafer,severely reducing product yields and cleaning efficiency for ultra-thin device wafers.Here,we proposed an interfacial separation strategy based on laser-induced hot stamping effect and thermoelastic stress wave,which enables stress-free separation of wafer bonding pairs at the interface of the release layer and the adhesive layer(R/A separation).By comprehensively analyzing the micro-morphology and material composition of the release material,we elucidated the laser debonding behavior of bonded pairs under different separation modes.Additionally,we calculated the ablation threshold of the release material in the case of wafer bonding and established the processing window for different separation methods.This work offers a fresh perspective on the development and application of laser debonding technology.The proposed R/A interface separation method is versatile,controllable,and highly reliable,and does not leave release materials and carbonized debris on device wafers,demonstrating strong industrial adaptability,which greatly facilitates the application and development of advanced packaging for ultra-thin chips.展开更多
It is a challenge to develop complex-shaped Ni Ti shape memory alloy parts by traditional processing methods, due to the poor machinability of Ni Ti alloy. It is reported that selective laser melting(SLM) of additive ...It is a challenge to develop complex-shaped Ni Ti shape memory alloy parts by traditional processing methods, due to the poor machinability of Ni Ti alloy. It is reported that selective laser melting(SLM) of additive manufacturing could overcome this problem. However, the reported SLM-produced Ni Ti exhibits poor tensile ductility due to the inner defects and adverse unidirectional columnar grains from SLM process. In this work, the defect-less SLM-Ni Ti with nondirective columnar grains was fabricated by optimizing the intraformational laser scanning length and interformational laser scanning direction. The obtained lath-shaped SLM-Ni Ti sample exhibits tensile strain of 15.6%, more than twice of the reported maximum result(7%). Besides, the SLM-Ni Ti part with complex geometry displays a shape memory recovery of 99% under compressive deformation of 50%.展开更多
Single event effects of 1-T structure programmable read-only memory(PROM) devices fabricated with a 130-nm complementary metal oxide semiconductorbased thin/thick gate oxide anti-fuse process were investigated using h...Single event effects of 1-T structure programmable read-only memory(PROM) devices fabricated with a 130-nm complementary metal oxide semiconductorbased thin/thick gate oxide anti-fuse process were investigated using heavy ions and a picosecond pulsed laser. The cross sections of a single event upset(SEU) for radiationhardened PROMs were measured using a linear energy transfer(LET) ranging from 9.2 to 95.6 MeV cm^2mg^(-1).The result indicated that the LET threshold for a dynamic bit upset was ～ 9 MeV cm^2mg^(-1), which was lower than the threshold of ～ 20 MeV cm^2mg^(-1) for an address counter upset owing to the additional triple modular redundancy structure present in the latch. In addition, a slight hard error was observed in the anti-fuse structure when employing209 Bi ions with extremely high LET values(～ 91.6 MeV cm^2mg^(-1)) and large ion fluence(～ 1×10~8 ions cm^(-2)). To identify the detailed sensitive position of a SEU in PROMs, a pulsed laser with a 5-μm beam spot was used to scan the entire surface of the device.This revealed that the upset occurred in the peripheral circuits of the internal power source and I/O pairs rather than in the internal latches and buffers. This was subsequently confirmed by a ^(181)Ta experiment. Based on the experimental data and a rectangular parallelepiped model of the sensitive volume, the space error rates for the used PROMs were calculated using the CRèME-96 prediction tool. The results showed that this type of PROM was suitable for specific space applications, even in the geosynchronous orbit.展开更多
The effect of overlapping treatment on microstructure of laser clad WC/Ni60A composite coating was studied with XRD, SEM, TEM and SAED etc. The results show that during the overlapping treatment the existence of the ...The effect of overlapping treatment on microstructure of laser clad WC/Ni60A composite coating was studied with XRD, SEM, TEM and SAED etc. The results show that during the overlapping treatment the existence of the residual heat and edge angle effect on the substrate has changed the composition and microstructure of the coating by raising the fusion temperature and increasing the dilution degree of the coating.展开更多
●AIM:To evaluate the long-term effects of pattern scan laser(PASCAL)pan-retinal photocoagulation(PRP)on diabetic retinopathy(DR)in Chinese patients.●METHODS:In this retrospective study,we evaluated clinical data of ...●AIM:To evaluate the long-term effects of pattern scan laser(PASCAL)pan-retinal photocoagulation(PRP)on diabetic retinopathy(DR)in Chinese patients.●METHODS:In this retrospective study,we evaluated clinical data of 29 patients(53 eyes)with severe non-proliferative DR(SNPDR)or proliferative DR(PDR)who received PRP and follow-up at our hospital from 2008 to 2013.Sixteen patients(29 eyes)received PASCAL PRP and 13 patients(24 eyes)received 100-ms conventional laser PRP.●RESULTS:After long-term follow-up(mean,min-max days:719.8,290-1666 for PASCAL PRP vs 743.5,240-1348 for conventional PRP,P=0.569),patients receiving PASCAL PRP required fewer photocoagulation sessions than the conventional PRP group(2.6±1.0 vs 3.9±0.9,P<0.01).Best corrected visual acuity(BCVA)was reduced slightly in PASCAL PRP group while reduced significantly in conventional PRP group.At last visit,24 eyes in the PASCAL group(88.9%)and 21 eyes in the conventional group(91.7%)were improved or stable.Two eyes in PASCAL PRP group(7.4%)and 3 eyes in the conventional PRP group(12.5%)developed vitreous hemorrhage or vitreous fibrovascular proliferation.●CONCLUSION:PASCAL PRP is as effective and may be more conducive to maintaining visual acuity with less treatment sessions for DR treatment compared to conventional laser PRP.展开更多
The laser weapons will play a special role in the future high-tech war.To study the impact of airborne laser weapon on the System-of-System(SoS)effectiveness in cooperative com-bat,this paper proposes an indicator con...The laser weapons will play a special role in the future high-tech war.To study the impact of airborne laser weapon on the System-of-System(SoS)effectiveness in cooperative com-bat,this paper proposes an indicator construction method based on the combination of the weapon capability indicator system and the combat simulation.The indicator system of capability is divided into 4 layers by the bottom-to-up generation mechanism of indicators.It can describe the logical relationship between the indicator layers from a qualitative perspective.Together with the 4 layers capability indicator system,a hierarchical framework of airborne laser weapon is established by the agent-based modeling and simulation.Impact analyses show that the SoS effectiveness improves with the increase of the laser weapon output power,the laser launcher diameter,and the photoelectric sensor pixel.But the SoS effectiveness promotion brought by the photoelectric sensor pixel is limited.The results can be used for the development of tactical airborne laser weapon.展开更多
Laser additive manufacturing (AM) of lattice structures with light weight, excellent impact resistance, and energy absorption performance is receiving considerable attention in aerospace, transportation, and mechanica...Laser additive manufacturing (AM) of lattice structures with light weight, excellent impact resistance, and energy absorption performance is receiving considerable attention in aerospace, transportation, and mechanical equipment application fields. In this study, we designed four gradient lattice structures (GLSs) using the topology optimization method, including the unidirectional GLS, the bi-directional increasing GLS, the bi-directional decreasing GLS and the none-GLS. All GLSs were manufactureed by laser powder bed fusion (LPBF). The uniaxial compression tests and finite element analysis were conducted to investigate the influence of gradient distribution features on deformation modes and energy absorption performance of GLSs. The results showed that, compared with the 45° shear fracture characteristic of the none-GLS, the unidirectional GLS, the bi-directional increasing GLS and the bi-directional decreasing GLS had the characteristics of the layer-by-layer fracture, showing considerably improved energy absorption capacity. The bi-directional increasing GLS showed a unique combination of shear fracture and layer-by-layer fracture, having the optimal energy absorption performance with energy absorption and specific energy absorption of 235.6 J and 9.5 J g-1 at 0.5 strain, respectively. Combined with the shape memory effect of NiTi alloy, multiple compression-heat recovery experiments were carried out to verify the shape memory function of LPBF-processed NiTi GLSs. These findings have potential value for the future design of GLSs and the realization of shape memory function of NiTi components through laser AM.展开更多
Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built firs...Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built first, and then the micro-Doppler model is developed based on the proposed concept of micro-motion ma- trix, by which the theoretical formula of micro-Doppler signature of precession is derived. In order to further approach to the actual case, the occlusion effect is firstly considered in micro-Doppler, and the simulated result with occlusion effect is well in accordance with the measured result in microwave anechoic chamber, which suggests that the micro-motion model and micro-Doppler model of precession are both valid.展开更多
[ Objective] This study aimed to investigate the biological effects of laser-induced mutation on fibrous roots of yellow skin onion. [ Method] Wet seeds of two yellow skin onion cultivars were irradiated by CO2 laser ...[ Objective] This study aimed to investigate the biological effects of laser-induced mutation on fibrous roots of yellow skin onion. [ Method] Wet seeds of two yellow skin onion cultivars were irradiated by CO2 laser and He-Ne laser at three dosage levels separately. A randomized complete block design with three replications was adopted. The biological effects of laser-induced mutation on fibrous roots of Ll-generation yellow skin onion were investigated with biostatistics and physiological and biochemical methods. [Result] Significant variations in the biological effects caused by various laser treatments were observed in the length, quantity, fresh weight and activity of onion fibrous roots. Specifically, the variation in fibrous root length induced by different types of laser reached 5% significance level; significant variation was observed in fibrous roots of different onion cultivars induced by laser, while the variation among each treatment did not reach 5% sig- nifieance level ; the variation in fibrous root quantity induced by different dosage levels of laser reached 5% significance level ; laser radiation showed stimulating effect on root activity of onion. [ Conclusion] This study provided reference for laser-induced breeding of yellow skin onion.展开更多
The effect of nitrogen pressure on optical properties of hydrogen-free diamond-like carbon (DLC) films deposited by pulsed laser ablation graphite in different background pressures of nitrogen is reported. By varying ...The effect of nitrogen pressure on optical properties of hydrogen-free diamond-like carbon (DLC) films deposited by pulsed laser ablation graphite in different background pressures of nitrogen is reported. By varying nitrogen pressures from 0.05 to 15.00 Pa, the photoluminescence is gradually increased and optical transmittance is gradually decreased. Atomic force microscopy (AFM) is used to observe the surface morphology of the DLC films. The results indicate that the surface becomes unsmoothed and there a...展开更多
Low-level laser therapy(LLLT) may have an effect on the pain associated with orthodontic treatment. The aim of this study was to evaluate the effect of LLLT on pain and somatosensory sensitization induced by orthodont...Low-level laser therapy(LLLT) may have an effect on the pain associated with orthodontic treatment. The aim of this study was to evaluate the effect of LLLT on pain and somatosensory sensitization induced by orthodontic treatment. Forty individuals(12–33 years old; mean ± standard deviations: 20.8 ± 5.9 years) scheduled to receive orthodontic treatment were randomly divided into a laser group(LG) or a placebo group(PG)(1:1). The LG received LLLT(810-nm gallium-aluminium-arsenic diode laser in continuous mode with the power set at 400 mW, 2 J·cm–2) at 0 h, 2 h, 24 h, 4 d, and 7 d after treatment, and the PG received inactive treatment at the same time points. In both groups, the non-treated side served as a control. A numerical rating scale(NRS) of pain, pressure pain thresholds(PPTs), cold detection thresholds(CDTs), warmth detection thresholds(WDTs), cold pain thresholds(CPTs), and heat pain thresholds(HPTs) were tested on both sides at the gingiva and canine tooth and on the hand. The data were analysed by a repeated measures analysis of variance(ANOVA). The NRS pain scores were significantly lower in the LG group(P = 0.01). The CDTs,CPTs, WDTs, HPTs, and PPTs at the gingiva and the PPTs at the canine tooth were significantly less sensitive on the treatment side of the LG compared with that of the PG(P < 0.033). The parameters tested also showed significantly less sensitivity on the nontreatment side of the LG compared to that of the PG(P < 0.043). There were no differences between the groups for any quantitative sensory testing(QST) measures of the hand. The application of LLLT appears to reduce the pain and sensitivity of the tooth and gingiva associated with orthodontic treatment and may have contralateral effects within the trigeminal system but no generalized QST effects. Thus, the present study indicated a significant analgesia effect of LLLT application during orthodontic treatment.Further clinical applications are suggested.展开更多
To search for the new scanning plan that can reduce the bending angle variation and the bending curvatures of the bending edge, an explanation for the causes of the edge effects was given. Six new scanning strategies ...To search for the new scanning plan that can reduce the bending angle variation and the bending curvatures of the bending edge, an explanation for the causes of the edge effects was given. Six new scanning strategies were proposed through the change of the scanning length of middle and two ends based on the above analyses. Numerical simulations were carried out to study the edge effects using the six new scanning strategies. The simulation results show that the new scanning strategies can improve effectively the quality of the forming parts.展开更多
The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical perfo...The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical performance of three different normalization methods, namely normalization with background, internal normalization and three point smoothing techniques at different parameter settings is studied for quantification of Ag and Zn by Laser induced breakdown spectroscopy(LIBS).The LIBS spectra of five known concentration of silver zinc binary composites have been investigated at various laser irradiances(LIs). Calibration curves for both Ag(I) line(4d^(10)5s^2S_(1/2)→4d^(10)5p^2P_(1/2) at 338.28 nm) and Zn(I) line(4s5s^3S_1→4s4p^3P_2 at 481.053 nm) have been determined at LI of 5.86?×?10^(10)W cm^(-2). Slopes of these calibration curves provide the valuation of matrix effect in the Ag–Zn composites. With careful sample preparation and normalization after smoothing at optimum parameter setting(OPS), the minimization of sample matrix effect has been successfully achieved. A good linearity has been obtained in Ag and Zn calibration curve at OPS when normalized the whole area of spectrum after smoothing and the obtained coefficients of determination values were R^2?=?0.995 and 0.998 closer to 1. The results of matrix effect have been further verified by analysis of plasma parameters. Both plasma parameters showed no change with varying concentration at OPS. However, at high concentration of Ag, the observed significant changes in both plasma parameters at common parameter setting PS-1 and PS-2 were the gesture of matrix effect. In our case, the better analytical results were obtained at smoothing function with optimized parameter setting that indicates it is more efficient than normalization with background and internal normalization method.展开更多
The important features of the rescattering trajectories in strong field ionization process such as the cutoff of the return energy at 3.17Up and that of the final energy at 10Up are obtained, based on the adiabatic ap...The important features of the rescattering trajectories in strong field ionization process such as the cutoff of the return energy at 3.17Up and that of the final energy at 10Up are obtained, based on the adiabatic approximation in which the initial momentum of the electron is assumed to be zero. We theoretically study the nonadiabatic effect by assuming a nonzero initial momentum on the rescattering trajectories based on the semiclassical simpleman model. We show that the nonzero initial momentum will modify both the maximal return energy at collision and the final energy after backward scattering, but in different ways for odd and even number of return trajectories. The energies are increased for even number of returns but are decreased for odd number of returns when the nonzero （positive or negative） initial momentum is applied.展开更多
Based on some assumptions, the numerical model of thermal distribution in solid state laser crystal pumped by pulsed laser diode is set up due to the pumped intensity distribution. Taking into account the property of ...Based on some assumptions, the numerical model of thermal distribution in solid state laser crystal pumped by pulsed laser diode is set up due to the pumped intensity distribution. Taking into account the property of YAG materials that varies with temperature, the transient temperature distribution of the laser crystal is calculated using finite element method on condition that K is a constant and a function of temperature. Then, the influence of the pumping parameters on the thermal effect in laser crystal is also discussed. This study is helpful to optimize the design of the diode side pumped solid state lasers.展开更多
文摘A laser coherent detection system of 1550 nm wavelength was presented, and experimen- tal research on detecting micro-Doppler effect in a dynamic target was developed. In the study, the return signal in the time domain is decomposed into a set of components in different wavelet scales by multi-resolution wavelet analysis, and the components are associated with the vibrational motions in a target. Then micro-Doppler signatures are extracted by applying the reconstruction. During the course of the final data processing frequency analysis and time-frequency analysis are applied to analyze the vibrationM signals and estimate the motion parameters successfully. The experimental results indicate that the system can effectively detect micro-Doppler information in a moving target, and the tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analy- sis and time-frequency analysis.
文摘Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective of this review was to assess the current state of knowledge available on the thermal effects of lasers in lithotripsy,as well as explore any new areas where studies are needed.Methods In August 2022,a keyword search on Google Scholar,PubMed,and Scopus for all papers containing the phrases“thermal effects”AND“laser”AND“lithotripsy”AND“urology”was done followed by citation jumping to other studies pertaining to the topic and 35 relevant papers were included in our study.The data from relevant papers were segregated into five groups according to the factor studied and type of study,and tables were created for a comparison of data.Results Temperature above the threshold of 43℃ was reached only when the power was>40 W and when there was adequate irrigation(at least 15–30 mL/min).Shorter lasing time divided by lithotripsy time or operator duty cycles less than 70%also resulted in a smaller temperature rise.Conclusion At least eight factors modify the thermal effects of lasers,and most importantly,the use of chilled irrigation at higher perfusion rates,lower power settings of<40 W,and with a shorter operator duty cycle will help to prevent thermal injuries from occurring.Stones impacted in the ureter or pelvi-ureteric junction further increase the probability of thermal injuries during laser firing.
文摘During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.
文摘Introduction:Surgeons typically prefer 270μm and 272μm laser probes in retrograde intrarenal surgery(RIRS)due to the reduced deflection capacity of flexible ureterorenoscopes when using larger probe diameters.This study aims to investigate the effects of 272 and 365μm holmium laser probes on operative time,clinical efficacy,and complication rates in RIRS.Materials and Methods:A total of 285 patients with proximal ureteral or kidney stones who met the inclusion criteria were enrolled in the study.Patients were divided into two groups based on laser probe thickness:272μm and 365μm.Stone-free rates,operative time,and complication rates were compared between the groups.Factors affecting stone-free rates were analyzed using multivariate logistic regression analysis.Results:Patient and stone characteristics were similar between the two groups.No significant differences were found in stone-free or complication rates.However,operative time was significantly shorter in the 365μm probe group.In univariate analysis,risk factors for postoperative residual stones included multi-calyceal stones,lower pole stones,high Hounsfield unit(HU)values on noncontrast computed tomography,and larger stone size.In multivariate analysis,independent prognostic factors for residual stones were identified as multi-calycal stones,lower pole stones,and high HU values.Conclusion:Compared to 272μm laser probes,operative time was shorter in surgeries performed with 365μm laser probes.The 365μm holmium laser can be effectively and safely used in the treatment of proximal ureteral and renal stones,demonstrating high clinical efficacy and safety.
基金supported by the National Social Science Foundation of China(2022-SKJJ-C-037)the National Natural Science Foundation of China General Program(72071209).
文摘The emergence of laser technology has led to the gradual integration of laser weapon system(LaWS)into military scene,particularly in the field of anti-unmanned aerial vehicle(UAV),showcasing significant potential.However,A current limitation lies in the absence of a comprehensive quantitative approach to assess the capabilities of LaWS.To address this issue,a damage effectiveness characterization model for LaWS is established,taking into account the properties of laser transmission through the atmosphere and the thermal damage effects.By employing this model,key parameters pertaining to the effectiveness of laser damage are determined.The impact of various spatial positions and atmospheric conditions on the damage effectiveness of LaWS have been examined,employing simulation experiments with diverse parameters.The conclusions indicate that the damage effectiveness of LaWS is contingent upon the spatial position of the target,resulting in a diminished effectiveness to damage on distant,low-altitude targets.Additionally,the damage effectiveness of LaWS is heavily reliant on the atmospheric condition,particularly in complex settings such as midday and low visibility conditions,where the damage effectiveness is substantially reduced.This paper provides an accurate and effective calculation method for the rapid decisionmaking of the operators.
基金the National Natural Science Foundation of China(62174170)the Natural Science Foundation of Guangdong Province(2024A1515010123)+4 种基金the Shenzhen Science and Technology Program(20220807020526001)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0670000)the Shenzhen Science and Technology Program(KJZD20230923114708018,KJZD20230923114710022)the Talent Support Project of Guangdong(2021TX06C101)the Shenzhen Basic Research(JCYJ20210324115406019).
文摘Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by completely removing the material from the ablation region within the release material layer at high energy densities.However,this R/R separation method often results in a significant amount of release material and carbonized debris remaining on the surface of the device wafer,severely reducing product yields and cleaning efficiency for ultra-thin device wafers.Here,we proposed an interfacial separation strategy based on laser-induced hot stamping effect and thermoelastic stress wave,which enables stress-free separation of wafer bonding pairs at the interface of the release layer and the adhesive layer(R/A separation).By comprehensively analyzing the micro-morphology and material composition of the release material,we elucidated the laser debonding behavior of bonded pairs under different separation modes.Additionally,we calculated the ablation threshold of the release material in the case of wafer bonding and established the processing window for different separation methods.This work offers a fresh perspective on the development and application of laser debonding technology.The proposed R/A interface separation method is versatile,controllable,and highly reliable,and does not leave release materials and carbonized debris on device wafers,demonstrating strong industrial adaptability,which greatly facilitates the application and development of advanced packaging for ultra-thin chips.
基金supported by the National Key R&D Program of China (No. 2018YFB1105100)the Science Foundation of China University of Petroleum, Beijing (No. 2462018BJC005)+1 种基金the Joint Fund of Ministry of Education for Pre-research of Equipment (No. 6141A020222)the fourth batch of pre-research projects for manned spaceflight (No. 040202)
文摘It is a challenge to develop complex-shaped Ni Ti shape memory alloy parts by traditional processing methods, due to the poor machinability of Ni Ti alloy. It is reported that selective laser melting(SLM) of additive manufacturing could overcome this problem. However, the reported SLM-produced Ni Ti exhibits poor tensile ductility due to the inner defects and adverse unidirectional columnar grains from SLM process. In this work, the defect-less SLM-Ni Ti with nondirective columnar grains was fabricated by optimizing the intraformational laser scanning length and interformational laser scanning direction. The obtained lath-shaped SLM-Ni Ti sample exhibits tensile strain of 15.6%, more than twice of the reported maximum result(7%). Besides, the SLM-Ni Ti part with complex geometry displays a shape memory recovery of 99% under compressive deformation of 50%.
基金supported by the National Natural Science Foundation of China(Nos.11690041,11805244,and 11675233)the Opening Project of Science and Technology on Reliability Physics and Application Technology of the Electronic Component Laboratory(No.ZHD 201604)
文摘Single event effects of 1-T structure programmable read-only memory(PROM) devices fabricated with a 130-nm complementary metal oxide semiconductorbased thin/thick gate oxide anti-fuse process were investigated using heavy ions and a picosecond pulsed laser. The cross sections of a single event upset(SEU) for radiationhardened PROMs were measured using a linear energy transfer(LET) ranging from 9.2 to 95.6 MeV cm^2mg^(-1).The result indicated that the LET threshold for a dynamic bit upset was ～ 9 MeV cm^2mg^(-1), which was lower than the threshold of ～ 20 MeV cm^2mg^(-1) for an address counter upset owing to the additional triple modular redundancy structure present in the latch. In addition, a slight hard error was observed in the anti-fuse structure when employing209 Bi ions with extremely high LET values(～ 91.6 MeV cm^2mg^(-1)) and large ion fluence(～ 1×10~8 ions cm^(-2)). To identify the detailed sensitive position of a SEU in PROMs, a pulsed laser with a 5-μm beam spot was used to scan the entire surface of the device.This revealed that the upset occurred in the peripheral circuits of the internal power source and I/O pairs rather than in the internal latches and buffers. This was subsequently confirmed by a ^(181)Ta experiment. Based on the experimental data and a rectangular parallelepiped model of the sensitive volume, the space error rates for the used PROMs were calculated using the CRèME-96 prediction tool. The results showed that this type of PROM was suitable for specific space applications, even in the geosynchronous orbit.
文摘The effect of overlapping treatment on microstructure of laser clad WC/Ni60A composite coating was studied with XRD, SEM, TEM and SAED etc. The results show that during the overlapping treatment the existence of the residual heat and edge angle effect on the substrate has changed the composition and microstructure of the coating by raising the fusion temperature and increasing the dilution degree of the coating.
基金Supported by National Natural Science Foundation of China(No.81670866)Sun Yat-Sen University Clinical Research 5010 Project(No.2013007).
文摘●AIM:To evaluate the long-term effects of pattern scan laser(PASCAL)pan-retinal photocoagulation(PRP)on diabetic retinopathy(DR)in Chinese patients.●METHODS:In this retrospective study,we evaluated clinical data of 29 patients(53 eyes)with severe non-proliferative DR(SNPDR)or proliferative DR(PDR)who received PRP and follow-up at our hospital from 2008 to 2013.Sixteen patients(29 eyes)received PASCAL PRP and 13 patients(24 eyes)received 100-ms conventional laser PRP.●RESULTS:After long-term follow-up(mean,min-max days:719.8,290-1666 for PASCAL PRP vs 743.5,240-1348 for conventional PRP,P=0.569),patients receiving PASCAL PRP required fewer photocoagulation sessions than the conventional PRP group(2.6±1.0 vs 3.9±0.9,P<0.01).Best corrected visual acuity(BCVA)was reduced slightly in PASCAL PRP group while reduced significantly in conventional PRP group.At last visit,24 eyes in the PASCAL group(88.9%)and 21 eyes in the conventional group(91.7%)were improved or stable.Two eyes in PASCAL PRP group(7.4%)and 3 eyes in the conventional PRP group(12.5%)developed vitreous hemorrhage or vitreous fibrovascular proliferation.●CONCLUSION:PASCAL PRP is as effective and may be more conducive to maintaining visual acuity with less treatment sessions for DR treatment compared to conventional laser PRP.
文摘The laser weapons will play a special role in the future high-tech war.To study the impact of airborne laser weapon on the System-of-System(SoS)effectiveness in cooperative com-bat,this paper proposes an indicator construction method based on the combination of the weapon capability indicator system and the combat simulation.The indicator system of capability is divided into 4 layers by the bottom-to-up generation mechanism of indicators.It can describe the logical relationship between the indicator layers from a qualitative perspective.Together with the 4 layers capability indicator system,a hierarchical framework of airborne laser weapon is established by the agent-based modeling and simulation.Impact analyses show that the SoS effectiveness improves with the increase of the laser weapon output power,the laser launcher diameter,and the photoelectric sensor pixel.But the SoS effectiveness promotion brought by the photoelectric sensor pixel is limited.The results can be used for the development of tactical airborne laser weapon.
基金supported by the financial support from the National Natural Science Foundation of China(Nos.51735005 and U1930207)the Basic Strengthening Program(No.2019-JCJQ-JJ-331)+1 种基金National Natural Science Founda-tion of China for Creative Research Groups(No.51921003)the 15th Batch of‘Six Talents Peaks’Innovative Talents Team Program(No.TD-GDZB-001).
文摘Laser additive manufacturing (AM) of lattice structures with light weight, excellent impact resistance, and energy absorption performance is receiving considerable attention in aerospace, transportation, and mechanical equipment application fields. In this study, we designed four gradient lattice structures (GLSs) using the topology optimization method, including the unidirectional GLS, the bi-directional increasing GLS, the bi-directional decreasing GLS and the none-GLS. All GLSs were manufactureed by laser powder bed fusion (LPBF). The uniaxial compression tests and finite element analysis were conducted to investigate the influence of gradient distribution features on deformation modes and energy absorption performance of GLSs. The results showed that, compared with the 45° shear fracture characteristic of the none-GLS, the unidirectional GLS, the bi-directional increasing GLS and the bi-directional decreasing GLS had the characteristics of the layer-by-layer fracture, showing considerably improved energy absorption capacity. The bi-directional increasing GLS showed a unique combination of shear fracture and layer-by-layer fracture, having the optimal energy absorption performance with energy absorption and specific energy absorption of 235.6 J and 9.5 J g-1 at 0.5 strain, respectively. Combined with the shape memory effect of NiTi alloy, multiple compression-heat recovery experiments were carried out to verify the shape memory function of LPBF-processed NiTi GLSs. These findings have potential value for the future design of GLSs and the realization of shape memory function of NiTi components through laser AM.
文摘Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built first, and then the micro-Doppler model is developed based on the proposed concept of micro-motion ma- trix, by which the theoretical formula of micro-Doppler signature of precession is derived. In order to further approach to the actual case, the occlusion effect is firstly considered in micro-Doppler, and the simulated result with occlusion effect is well in accordance with the measured result in microwave anechoic chamber, which suggests that the micro-motion model and micro-Doppler model of precession are both valid.
基金Supported by Natural Science Foundation of Sichuan Education Department(2008ZA033)
文摘[ Objective] This study aimed to investigate the biological effects of laser-induced mutation on fibrous roots of yellow skin onion. [ Method] Wet seeds of two yellow skin onion cultivars were irradiated by CO2 laser and He-Ne laser at three dosage levels separately. A randomized complete block design with three replications was adopted. The biological effects of laser-induced mutation on fibrous roots of Ll-generation yellow skin onion were investigated with biostatistics and physiological and biochemical methods. [Result] Significant variations in the biological effects caused by various laser treatments were observed in the length, quantity, fresh weight and activity of onion fibrous roots. Specifically, the variation in fibrous root length induced by different types of laser reached 5% significance level; significant variation was observed in fibrous roots of different onion cultivars induced by laser, while the variation among each treatment did not reach 5% sig- nifieance level ; the variation in fibrous root quantity induced by different dosage levels of laser reached 5% significance level ; laser radiation showed stimulating effect on root activity of onion. [ Conclusion] This study provided reference for laser-induced breeding of yellow skin onion.
基金supported by the Natural Science Foundationof Shandong Province (Grant No. Y2002A09).
文摘The effect of nitrogen pressure on optical properties of hydrogen-free diamond-like carbon (DLC) films deposited by pulsed laser ablation graphite in different background pressures of nitrogen is reported. By varying nitrogen pressures from 0.05 to 15.00 Pa, the photoluminescence is gradually increased and optical transmittance is gradually decreased. Atomic force microscopy (AFM) is used to observe the surface morphology of the DLC films. The results indicate that the surface becomes unsmoothed and there a...
基金funded by the Priority Academic Program Development of Jiangsu Higher Education Institution(Grant No.2014-37)the Jiangsu Provincial Health and Family Planning Commission(No.H201535)Orofacial Pain and TMD Research Unit,Institute of Stomatology,Affiliated Hospital of Stomatology,Nanjing Medical University,for their support
文摘Low-level laser therapy(LLLT) may have an effect on the pain associated with orthodontic treatment. The aim of this study was to evaluate the effect of LLLT on pain and somatosensory sensitization induced by orthodontic treatment. Forty individuals(12–33 years old; mean ± standard deviations: 20.8 ± 5.9 years) scheduled to receive orthodontic treatment were randomly divided into a laser group(LG) or a placebo group(PG)(1:1). The LG received LLLT(810-nm gallium-aluminium-arsenic diode laser in continuous mode with the power set at 400 mW, 2 J·cm–2) at 0 h, 2 h, 24 h, 4 d, and 7 d after treatment, and the PG received inactive treatment at the same time points. In both groups, the non-treated side served as a control. A numerical rating scale(NRS) of pain, pressure pain thresholds(PPTs), cold detection thresholds(CDTs), warmth detection thresholds(WDTs), cold pain thresholds(CPTs), and heat pain thresholds(HPTs) were tested on both sides at the gingiva and canine tooth and on the hand. The data were analysed by a repeated measures analysis of variance(ANOVA). The NRS pain scores were significantly lower in the LG group(P = 0.01). The CDTs,CPTs, WDTs, HPTs, and PPTs at the gingiva and the PPTs at the canine tooth were significantly less sensitive on the treatment side of the LG compared with that of the PG(P < 0.033). The parameters tested also showed significantly less sensitivity on the nontreatment side of the LG compared to that of the PG(P < 0.043). There were no differences between the groups for any quantitative sensory testing(QST) measures of the hand. The application of LLLT appears to reduce the pain and sensitivity of the tooth and gingiva associated with orthodontic treatment and may have contralateral effects within the trigeminal system but no generalized QST effects. Thus, the present study indicated a significant analgesia effect of LLLT application during orthodontic treatment.Further clinical applications are suggested.
文摘To search for the new scanning plan that can reduce the bending angle variation and the bending curvatures of the bending edge, an explanation for the causes of the edge effects was given. Six new scanning strategies were proposed through the change of the scanning length of middle and two ends based on the above analyses. Numerical simulations were carried out to study the edge effects using the six new scanning strategies. The simulation results show that the new scanning strategies can improve effectively the quality of the forming parts.
基金supported by National Natural Science Foundation of China (Nos. 11475039, 11705020, 11605023)Liaoning Provincial Natural Science Foundation of China (No. 20170540153)
文摘The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical performance of three different normalization methods, namely normalization with background, internal normalization and three point smoothing techniques at different parameter settings is studied for quantification of Ag and Zn by Laser induced breakdown spectroscopy(LIBS).The LIBS spectra of five known concentration of silver zinc binary composites have been investigated at various laser irradiances(LIs). Calibration curves for both Ag(I) line(4d^(10)5s^2S_(1/2)→4d^(10)5p^2P_(1/2) at 338.28 nm) and Zn(I) line(4s5s^3S_1→4s4p^3P_2 at 481.053 nm) have been determined at LI of 5.86?×?10^(10)W cm^(-2). Slopes of these calibration curves provide the valuation of matrix effect in the Ag–Zn composites. With careful sample preparation and normalization after smoothing at optimum parameter setting(OPS), the minimization of sample matrix effect has been successfully achieved. A good linearity has been obtained in Ag and Zn calibration curve at OPS when normalized the whole area of spectrum after smoothing and the obtained coefficients of determination values were R^2?=?0.995 and 0.998 closer to 1. The results of matrix effect have been further verified by analysis of plasma parameters. Both plasma parameters showed no change with varying concentration at OPS. However, at high concentration of Ag, the observed significant changes in both plasma parameters at common parameter setting PS-1 and PS-2 were the gesture of matrix effect. In our case, the better analytical results were obtained at smoothing function with optimized parameter setting that indicates it is more efficient than normalization with background and internal normalization method.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11425414 and 11504215the Scientific Research Training Program of Shanxi University
文摘The important features of the rescattering trajectories in strong field ionization process such as the cutoff of the return energy at 3.17Up and that of the final energy at 10Up are obtained, based on the adiabatic approximation in which the initial momentum of the electron is assumed to be zero. We theoretically study the nonadiabatic effect by assuming a nonzero initial momentum on the rescattering trajectories based on the semiclassical simpleman model. We show that the nonzero initial momentum will modify both the maximal return energy at collision and the final energy after backward scattering, but in different ways for odd and even number of return trajectories. The energies are increased for even number of returns but are decreased for odd number of returns when the nonzero （positive or negative） initial momentum is applied.
基金Natural Science Foundation of Jinlin Provine Education Depart ment(2006JYT01)
文摘Based on some assumptions, the numerical model of thermal distribution in solid state laser crystal pumped by pulsed laser diode is set up due to the pumped intensity distribution. Taking into account the property of YAG materials that varies with temperature, the transient temperature distribution of the laser crystal is calculated using finite element method on condition that K is a constant and a function of temperature. Then, the influence of the pumping parameters on the thermal effect in laser crystal is also discussed. This study is helpful to optimize the design of the diode side pumped solid state lasers.
