As a representative transition metal dichalcogenides(TMD),NiTe_(2)has an ultra-fast optical response,high carrier mobility,and excellent environmental stability.It has a broad application prospect in the fields of ene...As a representative transition metal dichalcogenides(TMD),NiTe_(2)has an ultra-fast optical response,high carrier mobility,and excellent environmental stability.It has a broad application prospect in the fields of ener-gy,biomedicine,optoelectronic devices,and so on.At present,there have been scant reports on the application of NiTe_(2)in the field of ultrafast photonics.In this work,NiTe_(2)was synthesized by chemical vapor deposition(CVD)and integrated with a tapered optical fiber to achieve mode-locking in an erbium-doped fiber laser(EDFL)and a thu-lium-doped fiber laser(TDFL).The mode-locked EDFL exhibited a pulse width of 678 fs and an output power of 3.92 mW.The pulse width of mode-locked TDFL was estimated to have a pulse width of 694 fs with an output power of 21.64 mW.These results demonstrate that NiTe_(2)is an effective saturable absorber material with potential applica-tions in the field of ultrafast optics.展开更多
Compact and robust wavelength-tunable mid-infrared fiber lasers are urgently needed in the fields of spectroscopic sensing,polymer processing,and free-space communications.In this work,we experimentally reported a hig...Compact and robust wavelength-tunable mid-infrared fiber lasers are urgently needed in the fields of spectroscopic sensing,polymer processing,and free-space communications.In this work,we experimentally reported a high-power wavelength-tunable Er^(3+)/Dy^(3+)codoped fluoride fiber laser by diode clad pumping at 974 nm.Adopting a ruled diffraction grating,the laser wavelength could be continuously tuned in the region of 2854 nm-3510 nm(656 nm)based on the ^(6)H_(13/2)→^(6)H_(15/2)transition of Dy^(3+),where 3510 nm represented the longest wavelength achieved from a Dy^(3+)-doped fluoride fiber laser.Within the wide range of 3018 nm-3331 nm(312 nm),the output power was always kept at>1 W,with the maximum power of 1.75 W obtained at 3181 nm.To the best of our knowledge,this is the first watt-level wavelength-tunable fiber laser in the region of>3μm.Further scaling the power and expanding the tuning range are expected by increasing the pump power while protecting the pumped fiber end.展开更多
Transition metal disulfides are widely applied as nonlinear optical materials for laser pulse generation.In this paper,TaS_(2)is successfully used for the first time to achieve a high-energy passively Q-switched erbiu...Transition metal disulfides are widely applied as nonlinear optical materials for laser pulse generation.In this paper,TaS_(2)is successfully used for the first time to achieve a high-energy passively Q-switched erbium-doped fiber(EDF)laser.TaS_(2)nanosheets are prepared by the liquid phase exfoliation method,and then the TaS_(2)solution is mixed with polyvinyl alcohol(PVA).TaS_(2)/PVA film is prepared,which is cut into 1 mm×1 mm flakes.TaS_(2)/PVA saturable absorber(SA)is obtained by sandwiching a small flake between two fiber optic patch cable connectors.With the TaS_(2)/PVA SA added to an EDF laser,a Q-switched fiber laser with a center wavelength of 1560 nm and a repetition rate ranging from 51.33 k Hz to 83.04 k Hz is realized.At the pump power of 231 m W,the maximum output power is 1094μW,and the shortest pulse duration is 3.48μs.The results confirm that the TaS_(2)material has excellent potential for application in nonlinear optics.展开更多
Recently, Bi_(4)Br_(4) is proved to be a member of topological insulators and is expected to be a promising candidate for ultrafast photonic device. However, experimental studies on the nonlinear optical properties of...Recently, Bi_(4)Br_(4) is proved to be a member of topological insulators and is expected to be a promising candidate for ultrafast photonic device. However, experimental studies on the nonlinear optical properties of Bi_(4)Br_(4) are limited, and its broadband absorption capabilities have not been validated. This study presents the first preparation of Bi_(4)Br_(4) samples using the chemical vapor transport method, resulting in a saturable absorber(SA) with a high modulation depth(46.23%) and low non-saturable loss(6.5%). The optical nonlinearity ranks among the best in similar studies. Additionally, this work applies Bi_(4)Br_(4)-SA for the first time in 1-μm fiber laser, developing a ring-cavity mode-locked fiber laser with a central wavelength of 1029.79 nm, a pulse duration of 442 fs, and a maximum output power of 90.83 m W. And a linear-cavity mode-locked fiber laser with a central wavelength of 1031.24 nm, a pulse duration of 511 fs, and a maximum output power of 92.81 m W is constructed. It is worth noting that the optical-to-optical conversion efficiency has reached about 11.54% and 33.58%.This study verifies Bi_(4)Br_(4)-SA's modulation effectiveness for 1-μm pulse lasers and provides a powerful reference for the design of high-efficiency fiber lasers.展开更多
Cladding light strippers(CLSs)are essential components for high-power monolithic fiber laser systems.Because they allow for bending of the fiber,which leads to an excellent stripping efficiency of light with a low ray...Cladding light strippers(CLSs)are essential components for high-power monolithic fiber laser systems.Because they allow for bending of the fiber,which leads to an excellent stripping efficiency of light with a low ray angle,refractive index-based CLSs have an advantage over the commonly used alternative approaches.However,conventional high-index CLSs overheat at relatively low input power as the maximum temperature,located in a hot-spot,increases linearly with the input power.This applies particularly to CLSs in thulium-based fiber systems,where very low power can already lead to extreme heat generation due to the high cladding material absorption around 2μm.Here,we investigate materials with a highly negative thermooptical coefficient combined with a refractive index closely above glass to distribute the stripped power and heat uniformly along an increased fiber length.Analyzing multiple CLS geometries for fiber diameters of 125 and 400μm,we show record-high maximum input powers for single-material CLSs of 21.8 W for the signal(2039 nm)and 675 W for the pump wavelength(793 nm).Transmitting excess light instead of overheating,this wavelength-adaptable self-protecting CLS concept is fast to apply onsite in the lab and reaches stripping efficiencies of>40 dB in the bent version.展开更多
A multi-wavelength and transversely mode-switchable fiber laser based on a ring-core fiber Bragg grating(RCFBG) is proposed. Two RCFBGs with high and low reflectivity are inscribed using a femtosecond laser and the ph...A multi-wavelength and transversely mode-switchable fiber laser based on a ring-core fiber Bragg grating(RCFBG) is proposed. Two RCFBGs with high and low reflectivity are inscribed using a femtosecond laser and the phase mask scanning technique, serving as the mirrors in an all-fiber laser linear resonator. Leveraging the polarization dependence of the RCFBG through side exposure, we can readily achieve switchable single-wavelength, dual-wavelength, or triple-wavelength laser outputs by adjusting the polarization controller(PC) inside the resonator. Additionally, three distinct modes, namely, cylindrical vector beam(CVB), fundamental and mixed modes, are successfully obtained in single-wavelength laser operation.Azimuthally or radially polarized lasers can be realized by tuning two PCs inside and outside the resonator while operating in CVB mode. This innovative multi-wavelength and transversely mode-switchable fiber laser based on RCFBGs holds significant potential for applications in wavelength division multiplexing and mode division multiplexing systems.展开更多
Ytterbium(Yb)-based mode-locked fiber lasers have undergone significant development and found widespread applications owing to their high efficiency,compact size,and low cost.However,these lasers typically operate wit...Ytterbium(Yb)-based mode-locked fiber lasers have undergone significant development and found widespread applications owing to their high efficiency,compact size,and low cost.However,these lasers typically operate within the 1030 to 1080 nm range,and expanding their operational wavelength is crucial for applications across various fields.We present the direct generation of a mode-locked laser at 1120.06 nm using an all-polarization-maintaining structure,establishing the longest wavelength reported to date for Yb-doped fiber-based mode-locked lasers.A stable picosecond pulse laser at 1120 nm was realized by combining high-concentration Yb-doping and phase-biasing technology within a figure-9 cavity configuration.The laser delivers a pulse duration of 6.20 ps,a spectral width of 0.19 nm centered at 1120.06 nm,and a repetition rate of 21.52 MHz and reaches a maximum output power of 1.39 W via a double-cladding Yb fiber power amplifier in a master oscillator power amplifier configuration.Furthermore,we present a theoretical investigation of the laser performance,with simulation results aligning well with experimental findings.In addition,a 560.06-nm ultrafast yellow-green laser was generated through frequency doubling in a lithium triborate crystal.We present an approach for long-wavelength Yb-doped mode-locked lasers,with the potential to advance the development and application of Yb-based fiber lasers.展开更多
Soliton molecules(SMs),bounded and self-assembled of particle-like dissipative solitons,exist with versatile mutual interactions and manifest substantial potential in soliton communication and optical data storage.How...Soliton molecules(SMs),bounded and self-assembled of particle-like dissipative solitons,exist with versatile mutual interactions and manifest substantial potential in soliton communication and optical data storage.However,controllable manipulation of the bounded molecular patterns remains challenging,as reaching a specific operation regime in lasers generally involves adjusting multiple control parameters in connection with a wide range of accessible pulse dynamics.An evolutionary algorithm is implemented for intelligent control of SMs in a 2μm ultrafast fiber laser mode locked through nonlinear polarization rotation.Depending on the specifications of the merit function used for the optimization procedure,various SM operations are obtained,including spectra shape programming and controllable deterministic switching of doublet and triplet SMs operating in stationary or pulsation states with reconfigurable temporal separations,frequency locking of pulsation SMs,doublet and SM complexes with controllable pulsation ratio,etc.Digital encoding is further demonstrated in this platform by employing the self-assembled characteristics of SMs.Our work opens up an avenue for active SM control beyond conventional telecom bands and brings useful insights into nonlinear science and applications.展开更多
Due to their unique physical properties,nonlinear materials are gradually demonstrating significant potential in the field of optics.Gold nanoparticles supported on carbon black(Au/CB),possessing low loss and high non...Due to their unique physical properties,nonlinear materials are gradually demonstrating significant potential in the field of optics.Gold nanoparticles supported on carbon black(Au/CB),possessing low loss and high nonlinear characteristics,serve as an excellent material for saturable absorber(SA) in ultrafast fiber lasers.In this study,we investigated the performance of Au/CB material and designed an ultrafast fiber laser based on Au/CB SA,successfully observing stable fundamental mode-locking and pulse bunch phenomena.Specifically,when the fiber laser operates in fundamental mode-locking state,the center wavelength of optical spectrum is 1 558.82 nm,with a 3 dB bandwidth of 2.26 nm.Additionally,to investigate the evolution of real-time spectra,the dispersive Fourier transform(DFT) technology is employed.On the other hand,the pulse bunch emitted by the laser is actually composed of numerous random sub-pulses,exhibiting high-energy characteristics.The number of sub-pulses increases with the increase of pump power.These findings contribute to further exploring the properties of Au/CB material and reveal its potential applications in ultrafast optics.展开更多
Based on the nonlinear saturable absorption properties(NSAPs)of a two-dimensional(2D)material of antimony selenide(Sb_(2)Se_(3)),a Q-switched erbium-doped fiber(EDF)laser is systematically demonstrated.The Sb_(2)Se_(3...Based on the nonlinear saturable absorption properties(NSAPs)of a two-dimensional(2D)material of antimony selenide(Sb_(2)Se_(3)),a Q-switched erbium-doped fiber(EDF)laser is systematically demonstrated.The Sb_(2)Se_(3)nano sheets are prepared by liquid-phase exfoliation(LPE)method.After the sandwich-structured Sb_(2)Se_(3)saturable absorber(SA)is fabricated,the NSAPs are characterized and the modulation depth,the saturation intensity and the unsaturated loss are determined to be 25.2%,2.02 MW/cm^(2),and 3.29%,respectively.When the as-prepared Sb_(2)Se_(3)-SA is integrated into the ring cavity,the laser operates at a stable Q-switching regime in the pump power range of 100—400 mW.The laser oscillates at the central wavelength of 1558.48 nm with a 3 dB bandwidth of 2.32 nm.Take the advantages of the Sb_(2)Se_(3)-SA,the pulse duration can be compressed from 40.49 kHz to 128.12 kHz.At the pump power of 400 mW,the Q-switching laser gives the narrowest pulse duration the highest average output power,the largest pulse energy,and the signal-to-noise ratio(SNR)of 0.93μs,2.16 mW,16.89 nJ,and 53 dB,respectively.Our new attempt on Sb_(2)Se_(3)-based Q-switched EDF laser,combining the existing mode-locking achievements,proves that Sb_(2)Se_(3)is a powerful candidate for pulse compression due to the characteristics of high modulation depth and high stability.展开更多
A dual-wavelength ring-cavity erbium-doped fiber(EDF)laser is designed based on two polarization beam splitters(PBSs)and a polarization controller(PC)performing gain equalization and polarization hole burning(PHB)effe...A dual-wavelength ring-cavity erbium-doped fiber(EDF)laser is designed based on two polarization beam splitters(PBSs)and a polarization controller(PC)performing gain equalization and polarization hole burning(PHB)effect.At room temperature,a stable dual-wavelength laser and a multi-output port laser which can simultaneously emit single-wavelength lasing and dual-wavelength lasing are obtained.The signal-to-noise ratios(SNRs)for single-wavelength outputs were 54.70 dB and 57.10 dB,with power fluctuations less than 0.038 mW and 0.029 mW,respectively.For dual-wavelength lasing,the SNRs were 59.63 dB and 59.25 dB,with power fluctuations less than 0.018 mW and 0.008 mW,respectively.The center wavelength drift was less than 0.006 nm for both single-wavelength and dual-wavelength outputs.展开更多
In this paper,a conventional soliton(CS)mode-locked erbium-doped fiber(EDF)laser was de-veloped using MAX phase material(MAX-PM)Nb_(4)AlC_(3)as a saturable absorber(SA).First,the liquid phase exfoliation(LPE)method wa...In this paper,a conventional soliton(CS)mode-locked erbium-doped fiber(EDF)laser was de-veloped using MAX phase material(MAX-PM)Nb_(4)AlC_(3)as a saturable absorber(SA).First,the liquid phase exfoliation(LPE)method was utilized to prepare Nb_(4)AlC_(3)nanosheets,and then a piece of tapered fiber was adopted to fabricate Nb_(4)AlC_(3)-SA.It was found that the saturation intensity and modulation depth of the Nb_(4)AlC_(3)-SA are 2.02 MW/cm^(2)and 1.88%.Based on the Nb_(4)AlC_(3)-SA,a conventional soliton(CS)mode-locked EDF laser was achieved.The central wavelength,pulse duration,and pulse repetition rate were found to be 1565.65 nm,615.37 fs,and 24.63 MHz,respectively.The performance is competitive and particularly superior in terms of pulse duration.This study fully confirms that Nb_(4)AlC_(3)possesses marvellous nonlinear saturable absorption properties and opens new possibilities for further research on air-stable ultrafast photon-ic devices.展开更多
In order to decrease the metallurgical porosity and keyhole-induced porosity during deep penetration laser welding of Al and its alloys, and increase the mechanical properties of work-piece, the effects of welding par...In order to decrease the metallurgical porosity and keyhole-induced porosity during deep penetration laser welding of Al and its alloys, and increase the mechanical properties of work-piece, the effects of welding parameters such as laser power, welding speed and defocusing value on both kinds of porosities were systemically analyzed respectively, and the shape and fluctuation of plume of the keyhole were observed to reflect the stability of the keyhole. The results show that increasing laser power or decreasing laser spot size can lead to the rising of both number and occupied area of pores in the weld; meanwhile, the plume fluctuates violently over the keyhole, which is always companied with the intense metallic vapor, liquid metal spatter and collapsing in the keyhole, thus more pores are generated in the weld. The porosity in the weld reaches the minimum at welding velocity of 2.0 m/min when laser power is 5 kW and defocusing value is 0.展开更多
Stitch welding of plate covered skeleton structure of Ti-6Al-4V titanium alloys has a variety of applications in aerospace vehicle manufacture. The laser stitch welding of Ti-6Al-4V titanium alloys was carried out by ...Stitch welding of plate covered skeleton structure of Ti-6Al-4V titanium alloys has a variety of applications in aerospace vehicle manufacture. The laser stitch welding of Ti-6Al-4V titanium alloys was carried out by a 4 kW ROFIN fiber laser. Influences of laser welding parameters on the macroscopic geometry, porosity, microstructure and mechanical properties of the stitch welded seams were investigated by digital microscope, optical microscope, scanning electron microscope and universal tensile testing machine. The results showed that the three-pipe nozzle with gas flow rate larger than 5 L/min could avoid oxidization, presenting better shielding effect in comparison with the single-pipe nozzle. Porosity formation could be suppressed with the gap between plate and skeleton less than 0.1 mm, while the existing porosity can be reduced with remelting. The maximum shear strength of stitch welding joint with minimal porosity was obtained by employing laser power of 1700 W, welding speed of 1.5 m/min and defocusing distance of ＋8 ram.展开更多
In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficienc...In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficiency of 51.2%. The output power, to the best of our knowledge, is the highest output at 1908 nm. The beam quality M2 factor is about 1.56. Also discussed in this paper is the dependence of the laser performance on fiber length.展开更多
We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-ca...We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro- optic modulator and a piezo-transducer, the repetition rate can be stabilized with a high-bandwidth servo in a frequency range of 3 kHz, enabling long-term repetition rate phase-locking. The in-loop frequency stability of repetition rate is about 1.6× 10-13 in an integration time of 1 s, limited by the measurement system; and it is inversely proportional to integration time in the short term. Furthermore, using a common path f-2f interferometer, the carrier envelope offset frequency of the comb is obtained with a signal-to-noise ratio of 40 dB in a 3-MHz resolution bandwidth. Stabilized cartier envelope offset frequency exhibits a deviation of 0.6 mHz in an integration time of 1 s.展开更多
This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polariza...This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polarization controllers. The experimental results show that the pulse-train nonuniformity is caused by the interaction between the nonuniform polarization states of the soliton pulses and the passive polarizer in the cavity.展开更多
Two-dimensional（2D） materials have been regarded as a promising nonlinear optical medium for fabricating versatile optical and optoelectronic devices. Among the various photonic applications, the employment of 2D ma...Two-dimensional（2D） materials have been regarded as a promising nonlinear optical medium for fabricating versatile optical and optoelectronic devices. Among the various photonic applications, the employment of 2D materials as nonlinear optical devices such as saturable absorbers for ultrashort pulse generation and shaping in ultrafast lasers is one of the most striking aspects in recent years. In this paper, we review the recent progress of 2D materials based pulse generation and soliton shaping in ultrafast fiber lasers, and particularly in the context of 2D materials-decorated microfiber photonic devices. The fabrication of 2D materials-decorated microfiber photonic devices, high performance mode-locked pulse generation, and the nonlinear soliton dynamics based on pulse shaping method are discussed. Finally, the challenges and the perspective of the 2D materials-based photonic devices as well as their applications are also discussed.展开更多
Using graphene-covered-microfiber （GCM） as a saturable absorber, the generation and evolution of multiple operation states are proposed and demonstrated in passively mode-locked thulium-doped fiber laser. The microf...Using graphene-covered-microfiber （GCM） as a saturable absorber, the generation and evolution of multiple operation states are proposed and demonstrated in passively mode-locked thulium-doped fiber laser. The microfiber was fabricated using the flame brushing method to an interaction length of - 1.2 cm with a waist diameter of -10 μm. Graphene layers were grown on copper foils by chemical vapor deposition and transferred onto the polydimethylsiloxane （PDMS） to form a PDMS/graphene film, which allowed light-graphene interaction via evanescent field. With the increase of the pump power from 1.25 W to 2.15 W, five different lasing regimes, including continuous-wave, conventional soliton mode-locking, multi- soliton mode-locking, a period of transition, and noise-like mode-locking, were achieved in a fiber ring cavity. To the best of our knowledge, it is the first report of the generation and evolution of multiple operation states by covering graphene on the microfiber in the 2-μ.m region. The results demonstrate that GCM can be a promising method for fabricating all fiber SA, and the switchable operation states can provide more portability in complex application domain.展开更多
After a half century of development, fiber laser has evolved from a concept to a great family penetrating into various fields of applications. This paper reviews the history and current development of fiber lasers, wi...After a half century of development, fiber laser has evolved from a concept to a great family penetrating into various fields of applications. This paper reviews the history and current development of fiber lasers, with topics covering both continuous wave and short pulse fiber lasers. Important issues such as the major rare earth dopants, fiber laser brightness, polarization effects, clad pumping technology, beam combination, mode locking and pulse shaping are discussed in this paper.展开更多
基金Supported by Guangdong Basic and Applied Basic Research Fund,China(2024A1515012429)。
文摘As a representative transition metal dichalcogenides(TMD),NiTe_(2)has an ultra-fast optical response,high carrier mobility,and excellent environmental stability.It has a broad application prospect in the fields of ener-gy,biomedicine,optoelectronic devices,and so on.At present,there have been scant reports on the application of NiTe_(2)in the field of ultrafast photonics.In this work,NiTe_(2)was synthesized by chemical vapor deposition(CVD)and integrated with a tapered optical fiber to achieve mode-locking in an erbium-doped fiber laser(EDFL)and a thu-lium-doped fiber laser(TDFL).The mode-locked EDFL exhibited a pulse width of 678 fs and an output power of 3.92 mW.The pulse width of mode-locked TDFL was estimated to have a pulse width of 694 fs with an output power of 21.64 mW.These results demonstrate that NiTe_(2)is an effective saturable absorber material with potential applica-tions in the field of ultrafast optics.
基金supported in parts by the National Natural Science Foundation of China under Grant No.62475035.
文摘Compact and robust wavelength-tunable mid-infrared fiber lasers are urgently needed in the fields of spectroscopic sensing,polymer processing,and free-space communications.In this work,we experimentally reported a high-power wavelength-tunable Er^(3+)/Dy^(3+)codoped fluoride fiber laser by diode clad pumping at 974 nm.Adopting a ruled diffraction grating,the laser wavelength could be continuously tuned in the region of 2854 nm-3510 nm(656 nm)based on the ^(6)H_(13/2)→^(6)H_(15/2)transition of Dy^(3+),where 3510 nm represented the longest wavelength achieved from a Dy^(3+)-doped fluoride fiber laser.Within the wide range of 3018 nm-3331 nm(312 nm),the output power was always kept at>1 W,with the maximum power of 1.75 W obtained at 3181 nm.To the best of our knowledge,this is the first watt-level wavelength-tunable fiber laser in the region of>3μm.Further scaling the power and expanding the tuning range are expected by increasing the pump power while protecting the pumped fiber end.
基金Project supported by the National Natural Science Foundation of China(Grant No.12075190)the Shaanxi Fundamental Science Research Project for Mathematics and Physics(Grant No.23JSY019)。
文摘Transition metal disulfides are widely applied as nonlinear optical materials for laser pulse generation.In this paper,TaS_(2)is successfully used for the first time to achieve a high-energy passively Q-switched erbium-doped fiber(EDF)laser.TaS_(2)nanosheets are prepared by the liquid phase exfoliation method,and then the TaS_(2)solution is mixed with polyvinyl alcohol(PVA).TaS_(2)/PVA film is prepared,which is cut into 1 mm×1 mm flakes.TaS_(2)/PVA saturable absorber(SA)is obtained by sandwiching a small flake between two fiber optic patch cable connectors.With the TaS_(2)/PVA SA added to an EDF laser,a Q-switched fiber laser with a center wavelength of 1560 nm and a repetition rate ranging from 51.33 k Hz to 83.04 k Hz is realized.At the pump power of 231 m W,the maximum output power is 1094μW,and the shortest pulse duration is 3.48μs.The results confirm that the TaS_(2)material has excellent potential for application in nonlinear optics.
基金Project supported by the Beijing Natural Science Foundation (Grant No. JQ21019)the National Key Research and Development Program of China (Grant Nos. 2022YFA1604200 and 2022YFA1204100)the Fund from Beijing Municipal Commission of Science and Technology (Grant No. Z231100006623006)。
文摘Recently, Bi_(4)Br_(4) is proved to be a member of topological insulators and is expected to be a promising candidate for ultrafast photonic device. However, experimental studies on the nonlinear optical properties of Bi_(4)Br_(4) are limited, and its broadband absorption capabilities have not been validated. This study presents the first preparation of Bi_(4)Br_(4) samples using the chemical vapor transport method, resulting in a saturable absorber(SA) with a high modulation depth(46.23%) and low non-saturable loss(6.5%). The optical nonlinearity ranks among the best in similar studies. Additionally, this work applies Bi_(4)Br_(4)-SA for the first time in 1-μm fiber laser, developing a ring-cavity mode-locked fiber laser with a central wavelength of 1029.79 nm, a pulse duration of 442 fs, and a maximum output power of 90.83 m W. And a linear-cavity mode-locked fiber laser with a central wavelength of 1031.24 nm, a pulse duration of 511 fs, and a maximum output power of 92.81 m W is constructed. It is worth noting that the optical-to-optical conversion efficiency has reached about 11.54% and 33.58%.This study verifies Bi_(4)Br_(4)-SA's modulation effectiveness for 1-μm pulse lasers and provides a powerful reference for the design of high-efficiency fiber lasers.
文摘Cladding light strippers(CLSs)are essential components for high-power monolithic fiber laser systems.Because they allow for bending of the fiber,which leads to an excellent stripping efficiency of light with a low ray angle,refractive index-based CLSs have an advantage over the commonly used alternative approaches.However,conventional high-index CLSs overheat at relatively low input power as the maximum temperature,located in a hot-spot,increases linearly with the input power.This applies particularly to CLSs in thulium-based fiber systems,where very low power can already lead to extreme heat generation due to the high cladding material absorption around 2μm.Here,we investigate materials with a highly negative thermooptical coefficient combined with a refractive index closely above glass to distribute the stripped power and heat uniformly along an increased fiber length.Analyzing multiple CLS geometries for fiber diameters of 125 and 400μm,we show record-high maximum input powers for single-material CLSs of 21.8 W for the signal(2039 nm)and 675 W for the pump wavelength(793 nm).Transmitting excess light instead of overheating,this wavelength-adaptable self-protecting CLS concept is fast to apply onsite in the lab and reaches stripping efficiencies of>40 dB in the bent version.
基金Project supported by the National Natural Science Foundation of China (Grant No. 62075182)the National Key Research and Development Program of China (Grant No. 2022YFB3207502)。
文摘A multi-wavelength and transversely mode-switchable fiber laser based on a ring-core fiber Bragg grating(RCFBG) is proposed. Two RCFBGs with high and low reflectivity are inscribed using a femtosecond laser and the phase mask scanning technique, serving as the mirrors in an all-fiber laser linear resonator. Leveraging the polarization dependence of the RCFBG through side exposure, we can readily achieve switchable single-wavelength, dual-wavelength, or triple-wavelength laser outputs by adjusting the polarization controller(PC) inside the resonator. Additionally, three distinct modes, namely, cylindrical vector beam(CVB), fundamental and mixed modes, are successfully obtained in single-wavelength laser operation.Azimuthally or radially polarized lasers can be realized by tuning two PCs inside and outside the resonator while operating in CVB mode. This innovative multi-wavelength and transversely mode-switchable fiber laser based on RCFBGs holds significant potential for applications in wavelength division multiplexing and mode division multiplexing systems.
基金supported by the National Natural Science Foundation of China(Grant No.92477133)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2025A1515011662)+1 种基金the National Natural Science Foundation of Fujian Province(Grant No.2025J01060)the National Natural Science Foundation of Xiamen(Grant No.3502Z202571016).
文摘Ytterbium(Yb)-based mode-locked fiber lasers have undergone significant development and found widespread applications owing to their high efficiency,compact size,and low cost.However,these lasers typically operate within the 1030 to 1080 nm range,and expanding their operational wavelength is crucial for applications across various fields.We present the direct generation of a mode-locked laser at 1120.06 nm using an all-polarization-maintaining structure,establishing the longest wavelength reported to date for Yb-doped fiber-based mode-locked lasers.A stable picosecond pulse laser at 1120 nm was realized by combining high-concentration Yb-doping and phase-biasing technology within a figure-9 cavity configuration.The laser delivers a pulse duration of 6.20 ps,a spectral width of 0.19 nm centered at 1120.06 nm,and a repetition rate of 21.52 MHz and reaches a maximum output power of 1.39 W via a double-cladding Yb fiber power amplifier in a master oscillator power amplifier configuration.Furthermore,we present a theoretical investigation of the laser performance,with simulation results aligning well with experimental findings.In addition,a 560.06-nm ultrafast yellow-green laser was generated through frequency doubling in a lithium triborate crystal.We present an approach for long-wavelength Yb-doped mode-locked lasers,with the potential to advance the development and application of Yb-based fiber lasers.
基金supported by the Research Grants Council of the Hong Kong Special Administrative Region of China(Grant Nos.HKU 17212824,HKU 17210522,HKU C7074-21G,HKU R7003-21,and HKU 17205321)the Innovation and Technology Commission of the Hong Kong SAR Government(Grant Nos.MHP/073/20 and MHP/057/21),and the Health@InnoHK program.
文摘Soliton molecules(SMs),bounded and self-assembled of particle-like dissipative solitons,exist with versatile mutual interactions and manifest substantial potential in soliton communication and optical data storage.However,controllable manipulation of the bounded molecular patterns remains challenging,as reaching a specific operation regime in lasers generally involves adjusting multiple control parameters in connection with a wide range of accessible pulse dynamics.An evolutionary algorithm is implemented for intelligent control of SMs in a 2μm ultrafast fiber laser mode locked through nonlinear polarization rotation.Depending on the specifications of the merit function used for the optimization procedure,various SM operations are obtained,including spectra shape programming and controllable deterministic switching of doublet and triplet SMs operating in stationary or pulsation states with reconfigurable temporal separations,frequency locking of pulsation SMs,doublet and SM complexes with controllable pulsation ratio,etc.Digital encoding is further demonstrated in this platform by employing the self-assembled characteristics of SMs.Our work opens up an avenue for active SM control beyond conventional telecom bands and brings useful insights into nonlinear science and applications.
基金supported by the Natural Science Foundation of Guangdong Province (No.2023A1515010093)the Shenzhen Fundamental Research Program (Nos.JCYJ20220809170611004, JCYJ20231121110828001 and JCYJ20231121113641002)。
文摘Due to their unique physical properties,nonlinear materials are gradually demonstrating significant potential in the field of optics.Gold nanoparticles supported on carbon black(Au/CB),possessing low loss and high nonlinear characteristics,serve as an excellent material for saturable absorber(SA) in ultrafast fiber lasers.In this study,we investigated the performance of Au/CB material and designed an ultrafast fiber laser based on Au/CB SA,successfully observing stable fundamental mode-locking and pulse bunch phenomena.Specifically,when the fiber laser operates in fundamental mode-locking state,the center wavelength of optical spectrum is 1 558.82 nm,with a 3 dB bandwidth of 2.26 nm.Additionally,to investigate the evolution of real-time spectra,the dispersive Fourier transform(DFT) technology is employed.On the other hand,the pulse bunch emitted by the laser is actually composed of numerous random sub-pulses,exhibiting high-energy characteristics.The number of sub-pulses increases with the increase of pump power.These findings contribute to further exploring the properties of Au/CB material and reveal its potential applications in ultrafast optics.
基金supported by the National Natural Science Foundation of China(No.11304184)the Shandong University of Technology and Zibo City Integration Development Project(No.2019ZBXC120)。
文摘Based on the nonlinear saturable absorption properties(NSAPs)of a two-dimensional(2D)material of antimony selenide(Sb_(2)Se_(3)),a Q-switched erbium-doped fiber(EDF)laser is systematically demonstrated.The Sb_(2)Se_(3)nano sheets are prepared by liquid-phase exfoliation(LPE)method.After the sandwich-structured Sb_(2)Se_(3)saturable absorber(SA)is fabricated,the NSAPs are characterized and the modulation depth,the saturation intensity and the unsaturated loss are determined to be 25.2%,2.02 MW/cm^(2),and 3.29%,respectively.When the as-prepared Sb_(2)Se_(3)-SA is integrated into the ring cavity,the laser operates at a stable Q-switching regime in the pump power range of 100—400 mW.The laser oscillates at the central wavelength of 1558.48 nm with a 3 dB bandwidth of 2.32 nm.Take the advantages of the Sb_(2)Se_(3)-SA,the pulse duration can be compressed from 40.49 kHz to 128.12 kHz.At the pump power of 400 mW,the Q-switching laser gives the narrowest pulse duration the highest average output power,the largest pulse energy,and the signal-to-noise ratio(SNR)of 0.93μs,2.16 mW,16.89 nJ,and 53 dB,respectively.Our new attempt on Sb_(2)Se_(3)-based Q-switched EDF laser,combining the existing mode-locking achievements,proves that Sb_(2)Se_(3)is a powerful candidate for pulse compression due to the characteristics of high modulation depth and high stability.
基金supported by the Key Scientific Research Project of Hunan Education Department,China(No.23A0446)the Natural Science Foundation of Hunan Province,China(provinces and cities combined)(No.2022JJ50067)+1 种基金the Hunan Province Degree and Postgraduate Teaching Reform Research Project,China(No.2022JGYB182)the Scientific Research and Innovation Foundation of Hunan University of Technology(No.CX2314).
文摘A dual-wavelength ring-cavity erbium-doped fiber(EDF)laser is designed based on two polarization beam splitters(PBSs)and a polarization controller(PC)performing gain equalization and polarization hole burning(PHB)effect.At room temperature,a stable dual-wavelength laser and a multi-output port laser which can simultaneously emit single-wavelength lasing and dual-wavelength lasing are obtained.The signal-to-noise ratios(SNRs)for single-wavelength outputs were 54.70 dB and 57.10 dB,with power fluctuations less than 0.038 mW and 0.029 mW,respectively.For dual-wavelength lasing,the SNRs were 59.63 dB and 59.25 dB,with power fluctuations less than 0.018 mW and 0.008 mW,respectively.The center wavelength drift was less than 0.006 nm for both single-wavelength and dual-wavelength outputs.
文摘In this paper,a conventional soliton(CS)mode-locked erbium-doped fiber(EDF)laser was de-veloped using MAX phase material(MAX-PM)Nb_(4)AlC_(3)as a saturable absorber(SA).First,the liquid phase exfoliation(LPE)method was utilized to prepare Nb_(4)AlC_(3)nanosheets,and then a piece of tapered fiber was adopted to fabricate Nb_(4)AlC_(3)-SA.It was found that the saturation intensity and modulation depth of the Nb_(4)AlC_(3)-SA are 2.02 MW/cm^(2)and 1.88%.Based on the Nb_(4)AlC_(3)-SA,a conventional soliton(CS)mode-locked EDF laser was achieved.The central wavelength,pulse duration,and pulse repetition rate were found to be 1565.65 nm,615.37 fs,and 24.63 MHz,respectively.The performance is competitive and particularly superior in terms of pulse duration.This study fully confirms that Nb_(4)AlC_(3)possesses marvellous nonlinear saturable absorption properties and opens new possibilities for further research on air-stable ultrafast photon-ic devices.
基金Project(51204109)supported by the National Natural Science Foundation of China
文摘In order to decrease the metallurgical porosity and keyhole-induced porosity during deep penetration laser welding of Al and its alloys, and increase the mechanical properties of work-piece, the effects of welding parameters such as laser power, welding speed and defocusing value on both kinds of porosities were systemically analyzed respectively, and the shape and fluctuation of plume of the keyhole were observed to reflect the stability of the keyhole. The results show that increasing laser power or decreasing laser spot size can lead to the rising of both number and occupied area of pores in the weld; meanwhile, the plume fluctuates violently over the keyhole, which is always companied with the intense metallic vapor, liquid metal spatter and collapsing in the keyhole, thus more pores are generated in the weld. The porosity in the weld reaches the minimum at welding velocity of 2.0 m/min when laser power is 5 kW and defocusing value is 0.
基金Project(2012BAF08B02)supported by Key Project in the National Science and Technology Pillar Program During the Twelfth Five-year Plan Period,China
文摘Stitch welding of plate covered skeleton structure of Ti-6Al-4V titanium alloys has a variety of applications in aerospace vehicle manufacture. The laser stitch welding of Ti-6Al-4V titanium alloys was carried out by a 4 kW ROFIN fiber laser. Influences of laser welding parameters on the macroscopic geometry, porosity, microstructure and mechanical properties of the stitch welded seams were investigated by digital microscope, optical microscope, scanning electron microscope and universal tensile testing machine. The results showed that the three-pipe nozzle with gas flow rate larger than 5 L/min could avoid oxidization, presenting better shielding effect in comparison with the single-pipe nozzle. Porosity formation could be suppressed with the gap between plate and skeleton less than 0.1 mm, while the existing porosity can be reduced with remelting. The maximum shear strength of stitch welding joint with minimal porosity was obtained by employing laser power of 1700 W, welding speed of 1.5 m/min and defocusing distance of ＋8 ram.
文摘In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficiency of 51.2%. The output power, to the best of our knowledge, is the highest output at 1908 nm. The beam quality M2 factor is about 1.56. Also discussed in this paper is the dependence of the laser performance on fiber length.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.91336101 and 61127901)West Light Foundation of the Chinese Academy of Sciences(Grant No.2013ZD02)
文摘We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro- optic modulator and a piezo-transducer, the repetition rate can be stabilized with a high-bandwidth servo in a frequency range of 3 kHz, enabling long-term repetition rate phase-locking. The in-loop frequency stability of repetition rate is about 1.6× 10-13 in an integration time of 1 s, limited by the measurement system; and it is inversely proportional to integration time in the short term. Furthermore, using a common path f-2f interferometer, the carrier envelope offset frequency of the comb is obtained with a signal-to-noise ratio of 40 dB in a 3-MHz resolution bandwidth. Stabilized cartier envelope offset frequency exhibits a deviation of 0.6 mHz in an integration time of 1 s.
基金Project supported by the Natural Science Foundation of Guangdong Province,China (Grant No 04010397)
文摘This paper reports the periodic power variation of the pulse-train in a passively mode-locked soliton fiber ring laser. It can obtain either the uniform or nonuniform pulse-train output by simply rotating the polarization controllers. The experimental results show that the pulse-train nonuniformity is caused by the interaction between the nonuniform polarization states of the soliton pulses and the passive polarizer in the cavity.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61307058,61378036,11304101,and 11474108)Guangdong Natural Science Funds for Distinguished Young Scholar,China(Grant No.2014A030306019)+6 种基金Pearl River S&T Nova Program of Guangzhou,China(Grant No.2014J2200008)Program for Outstanding Innovative Young Talents of Guangdong Province,China(Grant No.2014TQ01X220)Program for Outstanding Young Teachers in Guangdong Higher Education Institutes,China(Grant No.YQ2015051)Science and Technology Project of Guangdong,China(Grant No.2016B090925004)Foundation for Young Talents in Higher Education of Guangdong,China(Grant No.2017KQNCX051)Science and Technology Program of Guangzhou,China(Grant No.201607010245)Scientific Research Foundation of Young Teacher of South China Normal University,China(Grant No.17KJ09)
文摘Two-dimensional（2D） materials have been regarded as a promising nonlinear optical medium for fabricating versatile optical and optoelectronic devices. Among the various photonic applications, the employment of 2D materials as nonlinear optical devices such as saturable absorbers for ultrashort pulse generation and shaping in ultrafast lasers is one of the most striking aspects in recent years. In this paper, we review the recent progress of 2D materials based pulse generation and soliton shaping in ultrafast fiber lasers, and particularly in the context of 2D materials-decorated microfiber photonic devices. The fabrication of 2D materials-decorated microfiber photonic devices, high performance mode-locked pulse generation, and the nonlinear soliton dynamics based on pulse shaping method are discussed. Finally, the challenges and the perspective of the 2D materials-based photonic devices as well as their applications are also discussed.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11304409 and 61705028)the Natural Science Foundation of Chongqing City,China(Grant Nos.csct2013jcyjA4004 and cstc2017jcyjA0893)+1 种基金the Scientific and Technological Research Program of Chongqing Municipal Education Commission,China(Grant No.KJ1500422)the Postgraduate Research Innovation Foundation of Chongqing City,China(Grant No.CYS17240)
文摘Using graphene-covered-microfiber （GCM） as a saturable absorber, the generation and evolution of multiple operation states are proposed and demonstrated in passively mode-locked thulium-doped fiber laser. The microfiber was fabricated using the flame brushing method to an interaction length of - 1.2 cm with a waist diameter of -10 μm. Graphene layers were grown on copper foils by chemical vapor deposition and transferred onto the polydimethylsiloxane （PDMS） to form a PDMS/graphene film, which allowed light-graphene interaction via evanescent field. With the increase of the pump power from 1.25 W to 2.15 W, five different lasing regimes, including continuous-wave, conventional soliton mode-locking, multi- soliton mode-locking, a period of transition, and noise-like mode-locking, were achieved in a fiber ring cavity. To the best of our knowledge, it is the first report of the generation and evolution of multiple operation states by covering graphene on the microfiber in the 2-μ.m region. The results demonstrate that GCM can be a promising method for fabricating all fiber SA, and the switchable operation states can provide more portability in complex application domain.
文摘After a half century of development, fiber laser has evolved from a concept to a great family penetrating into various fields of applications. This paper reviews the history and current development of fiber lasers, with topics covering both continuous wave and short pulse fiber lasers. Important issues such as the major rare earth dopants, fiber laser brightness, polarization effects, clad pumping technology, beam combination, mode locking and pulse shaping are discussed in this paper.
