We investigate the quantum motion of two ions stored in a Paul trap and interacting with a time-periodic laser field. In the pseudopotential approximation and large detuning condition, we find that the relative motion...We investigate the quantum motion of two ions stored in a Paul trap and interacting with a time-periodic laser field. In the pseudopotential approximation and large detuning condition, we find that the relative motion is independent of the laser field, but the exact centre-of-mass motion is closely related to the laser field. By adjusting the laser intensity and frequency, we can well control the quantum motion of the centre-of-mass. We illustrate some physical properties described by the centre-of-mass states, such as the squeezed coherent property, the widths and heights of the wavepackets of probability density, the classical-quantum correspondence, the resonance ladders of expectation energy and the transition probabilities between time-dependent quantum levels.展开更多
In this paper, the dynamics of coherent laser control of potassium atoms is studied by using the time-dependent multilevel approach （TDMA）. The calculation results of population transfer are presented with different...In this paper, the dynamics of coherent laser control of potassium atoms is studied by using the time-dependent multilevel approach （TDMA）. The calculation results of population transfer are presented with different laser fields. The results show that the population can be transferred to target state completely by a specially designed laser field.展开更多
The work is devoted to the choice of optimal parameters of laser controlled thermocracking (LСT) when cutting products with a complex curvilinear contour. With this purpose the LCT mathematical model is considered wh...The work is devoted to the choice of optimal parameters of laser controlled thermocracking (LСT) when cutting products with a complex curvilinear contour. With this purpose the LCT mathematical model is considered when a laser beam and coolant transfer from a rectilinear site to a non-rectilinear contour with given radius R. The obtained findings allow proper adjustment of LCT modes to ensure a higher quality of cutting the glass.展开更多
Influence produced by the heat effect at work of the laser instrument crystal of the semiconductor, the text designs a kind of temperature control system to the crystal of the laser instrument, using the thought and m...Influence produced by the heat effect at work of the laser instrument crystal of the semiconductor, the text designs a kind of temperature control system to the crystal of the laser instrument, using the thought and method of the classical control theory to analyze this temperature control system, and establishes mathematics model. According to mathematics model the text demonstrated the system at S field and time- area, and proposed optimizing basis to the total mark of proportion and differential parameter to con- troller PID, thus proposed a kind of temperature control scheme. And the thermostatically system is simulated by MATLAB.展开更多
The main characteristic feature of deep penetration laser beam welding is a large temperature difference between the plasma cavity(keyhole)in the weld pool centre and the melting/solidification front.Large temperature...The main characteristic feature of deep penetration laser beam welding is a large temperature difference between the plasma cavity(keyhole)in the weld pool centre and the melting/solidification front.Large temperature gradients in the weld pool result in very intensive thermocapillary(Marangoni)convection.The weld pool surface width becomes very large and unstable.However,an externally applied oscillating magnetic field can stabilize the surface of the melt.In the present work this technology was used to stabilize the weld pool surface in partial penetration 4.4 kW Nd:YAG laser beam welding of AW-5754 aluminium alloy in PA position.An AC magnet was mounted on the laser welding head.The oscillating magnetic field was oriented perpendicular to the welding direction.It was found that the AC magnetic field can drastically reduce the surface roughness of welds.X-ray image analysis shows a drastic reduction of welds porosity.This effect can be explained as a result of electromagnetic rectification of the melt.展开更多
A novel semiconductor laser system is presented based on a twisted fiber.To study the period-control and chaos-anticontrol of the laser system,we design a type of optic path as a control setup using the combination of...A novel semiconductor laser system is presented based on a twisted fiber.To study the period-control and chaos-anticontrol of the laser system,we design a type of optic path as a control setup using the combination of the twisted fiber and the polarization controller while we present a physical dynamics model of the delayed dual-feedback laser containing the twisted fiber effect.We give an analysis of the effect of the twisted fiber on the laser.We use the effects of the delayed phase and the rotation angle of the twisted fiber and the characteristics of the system to achieve control of the laser.The laser is deduced to a stable state,a double-periodic state,a period-6 state,a period-8 state,a period-9 state,a multi-period state,beat phenomenon,and so on.The periodic laser can be anti-controlled to chaos.Some chaos-anti-control area is found.The laser system is very useful for the study of chaos-control of the laser setup and the applications of some physics effects.展开更多
According to the disadvantages of traditional mechanical gyro inertial measurement unit('IMU') for steering system not being available for missile attitude control, a concept based on laser gyro IMU is propose...According to the disadvantages of traditional mechanical gyro inertial measurement unit('IMU') for steering system not being available for missile attitude control, a concept based on laser gyro IMU is proposed to realize navigation & positioning and attitude control. The concept will save three single-axis rate gyros compared with traditional missile attitude control system, and is available both for strapdown and platform inertial navigation systems. Firstly, this article analyzes the selection requirements of sensitive device for missile attitude control system, and then analyzes the feasibility of missile attitude control based on laser gyro theoretically, on this basis, from four aspects of error characteristics, anti-vibration characteristics, temperature characteristics and dynamic characteristics, validate the feasibility of the concept practically. Secondly according to the strict requirements of dynamic characteristics on attitude control system, a special design is made for gyro signal filtering used for attitude control. By changing the traditional high order FIR filter to adaptive filter and low order FIR filter, laser gyro's signal phase delay is reduced. The delay time of theoretical design is 1.5 ms. Lastly, this design is validated through an angle vibration test, and test curve indicates that the dynamic characteristics of laser gyro completely meets the requirements of the attitude control system, and the maximum delay time is 1.6144 ms, which satisfies with the attitude update rate of 2 ms per frame. This concept can simplify the missile guidance system design, at the same time, it does not reduce missile guidance accuracy, and also provides reference for the broadening of the application of laser gyro.展开更多
Laser heating technology is a type of potential and attractive space heat flux simulation technology, which is characterized by high heating rate, controlled spatial intensity distribution and rapid response. However,...Laser heating technology is a type of potential and attractive space heat flux simulation technology, which is characterized by high heating rate, controlled spatial intensity distribution and rapid response. However, the controlled plant is nonlinear, time-varying and uncertainty when implementing the laser-based heat flux simulation. In this paper, a novel intelligent adaptive controller based on proportion-integration-differentiation (PID) type fuzzy logic is proposed to improve the performance of laser-based ground thermal test. The temperature range of thermal cycles is more than 200 K in many instances. In order to improve the adaptability of controller, output scaling factors are real time adjusted while the thermal test is underway. The initial values of scaling factors are optimized using a stochastic hybrid particle swarm optimization (H-PSO) algorithm. A validating system has been established in the laboratory. The performance of the proposed controller is evaluated through extensive experiments under different operating conditions (reference and load disturbance). The results show that the proposed adaptive controller performs remarkably better compared to the conventional PID (PID) controller and the conventional PID type fuzzy (F-PID) controller considering performance indicators of overshoot, settling time and steady state error for laser-based ground thermal test. It is a reliable tool for effective temperature control of laser-based ground thermal test. (C) 2016 Chinese Society of Aeronautics and Astronautics. Production and hosting by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.展开更多
This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control ...This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control among the camera,laser diode modulation and scanning polyhedron.展开更多
According to the requirements, an active infrared system is designed, which is composed of the emitting and receiving parts. The emitting part consists of a GaAs semiconductor laser device and binoculars optical syste...According to the requirements, an active infrared system is designed, which is composed of the emitting and receiving parts. The emitting part consists of a GaAs semiconductor laser device and binoculars optical system. A Si photodiode is selected as the receiving device, and a preamplifier circuit is designed to match the detector and further improve the signal to noise ratio. The laser encoding mode is utilized to enhance the anti disturbance. The theoretical analysis of this system is presented and a system prototype is made according to the requirement. The experimental results agree well with the theoretical prediction.展开更多
In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and cont...In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and control system was developed. Based on the characteristics of each LIBS component, the following development steps have been performed:( 1) a summary of characteristic parameters of the component are established;( 2) the integration mechanism of multiple electrical interfaces is designed;( 3) the component control instruction library is developed. The experimental results indicate that the measurement and control system is compatible with most LIBS parts in the market.Spectrometer and laser can be compatible with at least three different types of parts. In addition,a multilayer iterative testing process is designed to improve the efficiency of optimization process of LIBS parameters. The experimental results have shown that the automatic optimization of the delay time compared to the manual testing provides significant gain in testing efficiency. The range of delay time in the experiments is 1. 28 to 10. 28 μs and the step value is 1,0. 5,0. 2 and 0. 1 μs. The gain in testing efficiency has been found to be increased by 73. 76%,75. 93%,78. 81% and 80. 42%,respectively.展开更多
The three-dimensional electron-electron correlation in an elliptically polarized laser field is investigated based on a semiclassical model. Asymmetry parameter α of the correlated electron momentum distribution is u...The three-dimensional electron-electron correlation in an elliptically polarized laser field is investigated based on a semiclassical model. Asymmetry parameter α of the correlated electron momentum distribution is used to quantitatively describe the electron-electron correlation. The dependence of α on elliptieity e is totally different in three directions. For the z direction （maJor polarization direction）, α first increases and reaches a maximum at ε = 0.275, then it decreases quickly. For the y direction in which the laser field is always absent, the ellipticity has a minor effect, and the asymmetry parameter fluctuates around α = -0.15. However, for the x direction （minor polarization direction）, α increases monotonously with ellipticity though starts from the same value as in the y direction when ε = 0. The behavior of α in the x direction actually indicates a transformation from the Coulomb interaction dominated correlation to the laser field dominated correlation. Therefore, our work provides an efficient way to control the three-dimensional electron electron correlation via an elliptically polarized intense laser field.展开更多
In continuous wave CO2 laser-TlG hybrid welding process, the laser energy is not fully utilized because of the absorption and defocusing by plasma in the arc space. Therefore, the optimal welding result can only be ac...In continuous wave CO2 laser-TlG hybrid welding process, the laser energy is not fully utilized because of the absorption and defocusing by plasma in the arc space. Therefore, the optimal welding result can only be achieved in a limited energy range. In order to improve the welding performance further, a novel hybrid welding method--pulse CO2 laser-TIG arc hybrid welding by coordinated control is proposed and investigated. The experimental results indicate that, compared with continuous wave CO2 laser-TIG hybrid welding, the absorption and defocusing of laser energy by plasma are decreased further, and at the same time, the availability ratio of laser and arc energy can be increased when a coordinated frequency is controlled. As a result, the weld appearance is also improved as well as the weld depth is deepened. Furthermore, the effect of frequency and phase of pulse laser and TIG arc on the arc images and welding characteristics is also studied. However, the novel hybrid method has great potentials in the application of industrials from views of techniques and economy.展开更多
This paper theoretically investigates the coherent phase control in electron-argon scattering assisted by a bichro- matic laser field. The laser field is composed of a fundamental component and its second harmonic. Th...This paper theoretically investigates the coherent phase control in electron-argon scattering assisted by a bichro- matic laser field. The laser field is composed of a fundamental component and its second harmonic. The incoming and out going states of electron are described by the Volkov wave functions, and the electron-target interaction is treated as a screening potential. Numerical results for differential cross section of multiphoton processes vs the phase difference between the two components of laser field are discussed for several scattering angles and impact energies.展开更多
Multi-layer laser cladding manufacturing is a newly developed rapid manufacturing technology. It is a powerful tool for direct fabrication of three-dimensional fully dense metal components and part repairing. In this ...Multi-layer laser cladding manufacturing is a newly developed rapid manufacturing technology. It is a powerful tool for direct fabrication of three-dimensional fully dense metal components and part repairing. In this paper, the microstructure evolution and properties of 316L stainless steel deposited with this technology was investigated, compact components with properties similar to the as-cast and wrought annealed material was obtained. Cracking was eliminated by introducing of supersonic vibration and application of parameter adjustment technologies.展开更多
Aβ-solidifying Ti-40 Al-9 V-0.5 Y(at.%)alloy with a high cracking sensitivity has been successfully fabricated by selective laser melting(SLM)in this study.The influence factors for cracking sensitivity,cracking beha...Aβ-solidifying Ti-40 Al-9 V-0.5 Y(at.%)alloy with a high cracking sensitivity has been successfully fabricated by selective laser melting(SLM)in this study.The influence factors for cracking sensitivity,cracking behavior and crack inhibition mechanism were investigated.The results show that the effects of process parameters on cracking sensitivity strongly depend on the cooling rate in molten pool with different heat transfer modes.The conduction mode with higher cooling rates exhibits a higher cracking sensitivity in comparison to the keyhole mode.Microstructure characteristics and phase transformations controlled by cooling rate determine the inherent ductility ofβ-solidifyingγ-Ti Al alloys during SLM.On this basis,the formation and inhibition mechanism of solidification and cold cracking are proposed.Finally,the crackfree Ti-40 Al-9 V-0.5 Y sample with fine equiaxed microstructures and favorable mechanical properties(microhardness of 542±19 HV,yield strength of 1871±12 MPa,ultimate strength of 2106±13 MPa and ultimate compressive strain of 10.89±0.57%)can be produced by SLM.The strengthening mechanism can be attributed to grain refinement and precipitation strengthening.展开更多
The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the tr...The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.展开更多
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10575034 and 10275023）, and the Science Foundation of the Laboratory of Magnetic Resonance and Atomic and Molecular Physics, China （Grant No T152504）.
文摘We investigate the quantum motion of two ions stored in a Paul trap and interacting with a time-periodic laser field. In the pseudopotential approximation and large detuning condition, we find that the relative motion is independent of the laser field, but the exact centre-of-mass motion is closely related to the laser field. By adjusting the laser intensity and frequency, we can well control the quantum motion of the centre-of-mass. We illustrate some physical properties described by the centre-of-mass states, such as the squeezed coherent property, the widths and heights of the wavepackets of probability density, the classical-quantum correspondence, the resonance ladders of expectation energy and the transition probabilities between time-dependent quantum levels.
基金Project supported by the Natural Science Foundation of Henan province, China （Grant No 0411011900）.
文摘In this paper, the dynamics of coherent laser control of potassium atoms is studied by using the time-dependent multilevel approach （TDMA）. The calculation results of population transfer are presented with different laser fields. The results show that the population can be transferred to target state completely by a specially designed laser field.
文摘The work is devoted to the choice of optimal parameters of laser controlled thermocracking (LСT) when cutting products with a complex curvilinear contour. With this purpose the LCT mathematical model is considered when a laser beam and coolant transfer from a rectilinear site to a non-rectilinear contour with given radius R. The obtained findings allow proper adjustment of LCT modes to ensure a higher quality of cutting the glass.
文摘Influence produced by the heat effect at work of the laser instrument crystal of the semiconductor, the text designs a kind of temperature control system to the crystal of the laser instrument, using the thought and method of the classical control theory to analyze this temperature control system, and establishes mathematics model. According to mathematics model the text demonstrated the system at S field and time- area, and proposed optimizing basis to the total mark of proportion and differential parameter to con- troller PID, thus proposed a kind of temperature control scheme. And the thermostatically system is simulated by MATLAB.
基金Item Sponsored by the German Collaborative Industrial Research Program (IGF) and the German Welding Society (DVS) Under Grant Nr.IGF-17.265 N/DVS-06.078
文摘The main characteristic feature of deep penetration laser beam welding is a large temperature difference between the plasma cavity(keyhole)in the weld pool centre and the melting/solidification front.Large temperature gradients in the weld pool result in very intensive thermocapillary(Marangoni)convection.The weld pool surface width becomes very large and unstable.However,an externally applied oscillating magnetic field can stabilize the surface of the melt.In the present work this technology was used to stabilize the weld pool surface in partial penetration 4.4 kW Nd:YAG laser beam welding of AW-5754 aluminium alloy in PA position.An AC magnet was mounted on the laser welding head.The oscillating magnetic field was oriented perpendicular to the welding direction.It was found that the AC magnetic field can drastically reduce the surface roughness of welds.X-ray image analysis shows a drastic reduction of welds porosity.This effect can be explained as a result of electromagnetic rectification of the melt.
文摘A novel semiconductor laser system is presented based on a twisted fiber.To study the period-control and chaos-anticontrol of the laser system,we design a type of optic path as a control setup using the combination of the twisted fiber and the polarization controller while we present a physical dynamics model of the delayed dual-feedback laser containing the twisted fiber effect.We give an analysis of the effect of the twisted fiber on the laser.We use the effects of the delayed phase and the rotation angle of the twisted fiber and the characteristics of the system to achieve control of the laser.The laser is deduced to a stable state,a double-periodic state,a period-6 state,a period-8 state,a period-9 state,a multi-period state,beat phenomenon,and so on.The periodic laser can be anti-controlled to chaos.Some chaos-anti-control area is found.The laser system is very useful for the study of chaos-control of the laser setup and the applications of some physics effects.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50979093)
文摘According to the disadvantages of traditional mechanical gyro inertial measurement unit('IMU') for steering system not being available for missile attitude control, a concept based on laser gyro IMU is proposed to realize navigation & positioning and attitude control. The concept will save three single-axis rate gyros compared with traditional missile attitude control system, and is available both for strapdown and platform inertial navigation systems. Firstly, this article analyzes the selection requirements of sensitive device for missile attitude control system, and then analyzes the feasibility of missile attitude control based on laser gyro theoretically, on this basis, from four aspects of error characteristics, anti-vibration characteristics, temperature characteristics and dynamic characteristics, validate the feasibility of the concept practically. Secondly according to the strict requirements of dynamic characteristics on attitude control system, a special design is made for gyro signal filtering used for attitude control. By changing the traditional high order FIR filter to adaptive filter and low order FIR filter, laser gyro's signal phase delay is reduced. The delay time of theoretical design is 1.5 ms. Lastly, this design is validated through an angle vibration test, and test curve indicates that the dynamic characteristics of laser gyro completely meets the requirements of the attitude control system, and the maximum delay time is 1.6144 ms, which satisfies with the attitude update rate of 2 ms per frame. This concept can simplify the missile guidance system design, at the same time, it does not reduce missile guidance accuracy, and also provides reference for the broadening of the application of laser gyro.
文摘Laser heating technology is a type of potential and attractive space heat flux simulation technology, which is characterized by high heating rate, controlled spatial intensity distribution and rapid response. However, the controlled plant is nonlinear, time-varying and uncertainty when implementing the laser-based heat flux simulation. In this paper, a novel intelligent adaptive controller based on proportion-integration-differentiation (PID) type fuzzy logic is proposed to improve the performance of laser-based ground thermal test. The temperature range of thermal cycles is more than 200 K in many instances. In order to improve the adaptability of controller, output scaling factors are real time adjusted while the thermal test is underway. The initial values of scaling factors are optimized using a stochastic hybrid particle swarm optimization (H-PSO) algorithm. A validating system has been established in the laboratory. The performance of the proposed controller is evaluated through extensive experiments under different operating conditions (reference and load disturbance). The results show that the proposed adaptive controller performs remarkably better compared to the conventional PID (PID) controller and the conventional PID type fuzzy (F-PID) controller considering performance indicators of overshoot, settling time and steady state error for laser-based ground thermal test. It is a reliable tool for effective temperature control of laser-based ground thermal test. (C) 2016 Chinese Society of Aeronautics and Astronautics. Production and hosting by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.
文摘This paper presents the principle and mathematic model for the 3D depth map method based on space encoding images performed by modulating scanning structuredlight according to time sequences,and the synchro control among the camera,laser diode modulation and scanning polyhedron.
文摘According to the requirements, an active infrared system is designed, which is composed of the emitting and receiving parts. The emitting part consists of a GaAs semiconductor laser device and binoculars optical system. A Si photodiode is selected as the receiving device, and a preamplifier circuit is designed to match the detector and further improve the signal to noise ratio. The laser encoding mode is utilized to enhance the anti disturbance. The theoretical analysis of this system is presented and a system prototype is made according to the requirement. The experimental results agree well with the theoretical prediction.
基金National M ajor Scientific Instruments and Equipment Development Special Funds,China(No.2011YQ030113)
文摘In order to improve the compatibility of laser-induced breakdown spectroscopy( LIBS) instrument for different types of parts and optimize the analysis and testing processes,a modularized automatic measurement and control system was developed. Based on the characteristics of each LIBS component, the following development steps have been performed:( 1) a summary of characteristic parameters of the component are established;( 2) the integration mechanism of multiple electrical interfaces is designed;( 3) the component control instruction library is developed. The experimental results indicate that the measurement and control system is compatible with most LIBS parts in the market.Spectrometer and laser can be compatible with at least three different types of parts. In addition,a multilayer iterative testing process is designed to improve the efficiency of optimization process of LIBS parameters. The experimental results have shown that the automatic optimization of the delay time compared to the manual testing provides significant gain in testing efficiency. The range of delay time in the experiments is 1. 28 to 10. 28 μs and the step value is 1,0. 5,0. 2 and 0. 1 μs. The gain in testing efficiency has been found to be increased by 73. 76%,75. 93%,78. 81% and 80. 42%,respectively.
基金Supported by the National Key Program for S&T Research and Development under Grant No 2016YFA0401100the National Basic Research Program of China under Grant No 2013CB922201the National Natural Science Foundation of China under Grant Nos 11504215,11374197,11334009 and 11425414
文摘The three-dimensional electron-electron correlation in an elliptically polarized laser field is investigated based on a semiclassical model. Asymmetry parameter α of the correlated electron momentum distribution is used to quantitatively describe the electron-electron correlation. The dependence of α on elliptieity e is totally different in three directions. For the z direction （maJor polarization direction）, α first increases and reaches a maximum at ε = 0.275, then it decreases quickly. For the y direction in which the laser field is always absent, the ellipticity has a minor effect, and the asymmetry parameter fluctuates around α = -0.15. However, for the x direction （minor polarization direction）, α increases monotonously with ellipticity though starts from the same value as in the y direction when ε = 0. The behavior of α in the x direction actually indicates a transformation from the Coulomb interaction dominated correlation to the laser field dominated correlation. Therefore, our work provides an efficient way to control the three-dimensional electron electron correlation via an elliptically polarized intense laser field.
文摘In continuous wave CO2 laser-TlG hybrid welding process, the laser energy is not fully utilized because of the absorption and defocusing by plasma in the arc space. Therefore, the optimal welding result can only be achieved in a limited energy range. In order to improve the welding performance further, a novel hybrid welding method--pulse CO2 laser-TIG arc hybrid welding by coordinated control is proposed and investigated. The experimental results indicate that, compared with continuous wave CO2 laser-TIG hybrid welding, the absorption and defocusing of laser energy by plasma are decreased further, and at the same time, the availability ratio of laser and arc energy can be increased when a coordinated frequency is controlled. As a result, the weld appearance is also improved as well as the weld depth is deepened. Furthermore, the effect of frequency and phase of pulse laser and TIG arc on the arc images and welding characteristics is also studied. However, the novel hybrid method has great potentials in the application of industrials from views of techniques and economy.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10874169 and 10674125)the National Basic Research Program of China (Grant No. 2007CB925200)S.-M. Li is grateful to Deutscher Akademischer Austauschdienst and Deutsche Forschungsgemeinschaft for financial support during his stay in Germany
文摘This paper theoretically investigates the coherent phase control in electron-argon scattering assisted by a bichro- matic laser field. The laser field is composed of a fundamental component and its second harmonic. The incoming and out going states of electron are described by the Volkov wave functions, and the electron-target interaction is treated as a screening potential. Numerical results for differential cross section of multiphoton processes vs the phase difference between the two components of laser field are discussed for several scattering angles and impact energies.
基金supported by the National Natural Science Foundation of China under the Grant No.50375096
文摘Multi-layer laser cladding manufacturing is a newly developed rapid manufacturing technology. It is a powerful tool for direct fabrication of three-dimensional fully dense metal components and part repairing. In this paper, the microstructure evolution and properties of 316L stainless steel deposited with this technology was investigated, compact components with properties similar to the as-cast and wrought annealed material was obtained. Cracking was eliminated by introducing of supersonic vibration and application of parameter adjustment technologies.
基金supported financially by the Pre-research Fund Project of Ministry of Equipment and Development of China(No.61409230301)the Fundamental Research Funds for the Central Universities through Program no.2019kfyXMPY005 and no.2019kfyXKJC042.
文摘Aβ-solidifying Ti-40 Al-9 V-0.5 Y(at.%)alloy with a high cracking sensitivity has been successfully fabricated by selective laser melting(SLM)in this study.The influence factors for cracking sensitivity,cracking behavior and crack inhibition mechanism were investigated.The results show that the effects of process parameters on cracking sensitivity strongly depend on the cooling rate in molten pool with different heat transfer modes.The conduction mode with higher cooling rates exhibits a higher cracking sensitivity in comparison to the keyhole mode.Microstructure characteristics and phase transformations controlled by cooling rate determine the inherent ductility ofβ-solidifyingγ-Ti Al alloys during SLM.On this basis,the formation and inhibition mechanism of solidification and cold cracking are proposed.Finally,the crackfree Ti-40 Al-9 V-0.5 Y sample with fine equiaxed microstructures and favorable mechanical properties(microhardness of 542±19 HV,yield strength of 1871±12 MPa,ultimate strength of 2106±13 MPa and ultimate compressive strain of 10.89±0.57%)can be produced by SLM.The strengthening mechanism can be attributed to grain refinement and precipitation strengthening.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2008AA03Z402)the Beijing Municipal Natural Science Foundation,China (Grant Nos. 4092007,4112006,4102003,and 4132006)+1 种基金the National Natural Science Foundation of China (Grant Nos. 61076044,61036002,61036009,and 60978067)the Doctoral Fund of the Ministry of Education of China (Grant No. 20121103110018)
文摘The polarization of traditional photonic crystal（PC） vertical cavity surface emitting laser（VCSEL） is uncontrollable,resulting in the bit error increasing easily.Elliptical hole photonic crystal can control the transverse mode and polarization of VCSEL efficiently.We analyze the far field divergence angle,and birefringence of elliptical hole PC VCSEL.When the ratio of minor axis to major axis b/a = 0.7,the PC VCSEL can obtain single mode and polarization.According to the simulation results,we fabricate the device successfully.The output power is 1.7 mW,the far field divergence angle is less than 10°,and the side mode suppression ratio is over 30 dB.The output power in the Y direction is 20 times that in the X direction.
