Shock wave caused by a sudden release of high-energy,such as explosion and blast,usually affects a significant range of areas.The utilization of a uniform fine mesh to capture sharp shock wave and to obtain precise re...Shock wave caused by a sudden release of high-energy,such as explosion and blast,usually affects a significant range of areas.The utilization of a uniform fine mesh to capture sharp shock wave and to obtain precise results is inefficient in terms of computational resource.This is particularly evident when large-scale fluid field simulations are conducted with significant differences in computational domain size.In this work,a variable-domain-size adaptive mesh enlargement(vAME)method is developed based on the proposed adaptive mesh enlargement(AME)method for modeling multi-explosives explosion problems.The vAME method reduces the division of numerous empty areas or unnecessary computational domains by adaptively suspending enlargement operation in one or two directions,rather than in all directions as in AME method.A series of numerical tests via AME and vAME with varying nonintegral enlargement ratios and different mesh numbers are simulated to verify the efficiency and order of accuracy.An estimate of speedup ratio is analyzed for further efficiency comparison.Several large-scale near-ground explosion experiments with single/multiple explosives are performed to analyze the shock wave superposition formed by the incident wave,reflected wave,and Mach wave.Additionally,the vAME method is employed to validate the accuracy,as well as to investigate the performance of the fluid field and shock wave propagation,considering explosive quantities ranging from 1 to 5 while maintaining a constant total mass.The results show a satisfactory correlation between the overpressure versus time curves for experiments and numerical simulations.The vAME method yields a competitive efficiency,increasing the computational speed to 3.0 and approximately 120,000 times in comparison to AME and the fully fine mesh method,respectively.It indicates that the vAME method reduces the computational cost with minimal impact on the results for such large-scale high-energy release problems with significant differences in computational domain size.展开更多
Free-interface dual-compatibility modal synthesis method(compatibility of both force and displacement on interfaces)is introduced to large-scale civil engineering structure to enhance computation efficiency. The basic...Free-interface dual-compatibility modal synthesis method(compatibility of both force and displacement on interfaces)is introduced to large-scale civil engineering structure to enhance computation efficiency. The basic equations of the method are first set up, and then the mode cut-off principle and the dividing principle are proposed. MATLAB is used for simulation in different frame structures. The simulation results demonstrate the applicability of this substructure method to civil engineering structures and the correctness of the proposed mode cut-off principle. Studies are also conducted on how to divide the whole structure for better computation efficiency while maintaining better precision. It is observed that the geometry and material properties should be considered, and the synthesis results would be more precise when the inflection points of the mode shapes are taken into consideration. Furthermore, the simulation performed on a large-scale high-rise connected structure further proves the feasibility and efficiency of this modal synthesis method compared with the traditional global method. It is also concluded from the simulation results that the fewer number of DOFs in each substructure will result in better computation efficiency, but too many substructures will be time-consuming due to the tedious synthesis procedures. Moreover, the substructures with free interface will introduce errors and reduce the precision dramatically, which should be avoided.展开更多
High-entropy alloy nanoparticles(HEA NPs)containing four or more elements possess several advantages over traditional alloy nanoparticles(NPs),such as higher strength,greater thermal stability,enhanced ox-idation resi...High-entropy alloy nanoparticles(HEA NPs)containing four or more elements possess several advantages over traditional alloy nanoparticles(NPs),such as higher strength,greater thermal stability,enhanced ox-idation resistance,stronger catalytic activity,and greater flexibility in adjusting element composition and composition ratio.However,the development of HEA NPs has been limited by preparation difficulties caused by the challenge of achieving complete miscibility between multiple-component elements and the unique high-entropy states.In this review,we provide a comprehensive summary of recent break-throughs in synthesizing and fabricating HEA NPs.We describe the experimental procedures and princi-ples of various synthesis methods,including furnace pyrolysis,carbothermal shock(CTS)method,pulse laser,solvothermal method,microwave heating,hydrogen spillover-driven,sputtering deposition,anneal-ing on mesoporous materials,arc discharge methods and using liquid metal.Additionally,we delve into recent improvements made to some of these methods or novel NPs synthesized using them.Finally,we review the current applications of HEA NPs and provide insights into potential applications of this rapidly emerging research field.展开更多
Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of hig...Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of high-quality TiC powders with low cost and high efficiency is crucial for industrial applications;however major challenges face its realization.Herein,the methods for synthesizing TiC powders based on a reaction system are reviewed.This analysis is focused on the underlying mechanisms by which synthesis methods affect the quality of powders.Notably,strategies for improving the synthesis of highquality powders are analyzed from the perspective of enhancing heat and mass transfer processes.Furthermore,the critical issues,challenges,and development trends of the synthesis technology and application of high-quality TiC powder are discussed.展开更多
Formalizing complex processes and phenomena of a real-world problem may require a large number of variables and constraints,resulting in what is termed a large-scale optimization problem.Nowadays,such large-scale opti...Formalizing complex processes and phenomena of a real-world problem may require a large number of variables and constraints,resulting in what is termed a large-scale optimization problem.Nowadays,such large-scale optimization problems are solved using computing machines,leading to an enormous computational time being required,which may delay deriving timely solutions.Decomposition methods,which partition a large-scale optimization problem into lower-dimensional subproblems,represent a key approach to addressing time-efficiency issues.There has been significant progress in both applied mathematics and emerging artificial intelligence approaches on this front.This work aims at providing an overview of the decomposition methods from both the mathematics and computer science points of view.We also remark on the state-of-the-art developments and recent applications of the decomposition methods,and discuss the future research and development perspectives.展开更多
The dynamic behaviors of a large-scale ring neural network with a triangular coupling structure are investigated.The characteristic equation of the high-dimensional system using Coate’s flow graph method is calculate...The dynamic behaviors of a large-scale ring neural network with a triangular coupling structure are investigated.The characteristic equation of the high-dimensional system using Coate’s flow graph method is calculated.Time delay is selected as the bifurcation parameter,and sufficient conditions for stability and Hopf bifurcation are derived.It is found that the connection coefficient and time delay play a crucial role in the dynamic behaviors of the model.Furthermore,a phase diagram of multiple equilibrium points with one saddle point and two stable nodes is presented.Finally,the effectiveness of the theory is verified through simulation results.展开更多
Against the backdrop of increasingly prominent global energy shortages and environmental issues,the development of efficient energy conversion and storage technologies has become crucial.Zero-dimensional(0D)metal oxid...Against the backdrop of increasingly prominent global energy shortages and environmental issues,the development of efficient energy conversion and storage technologies has become crucial.Zero-dimensional(0D)metal oxide composites exhibit significant application value in the field of energy chemistry due to their unique properties,such as quantum size effect and high specific surface area.From a broad perspective,this paper reviews the main synthesis methods of these composites,including sol-gel method,hydrothermal/solvothermal method,precipitation method,and template method,while analyzing the characteristics of each method.It further discusses their applications in photocatalytic hydrogen production,fuel cells,lithium-ion batteries,and supercapacitors.Additionally,the current challenges,such as material dispersibility and interface bonding,are pointed out,and future development directions are prospected,aiming to provide references for related research.展开更多
This article introduces the concept of load aggregation,which involves a comprehensive analysis of loads to acquire their external characteristics for the purpose of modeling and analyzing power systems.The online ide...This article introduces the concept of load aggregation,which involves a comprehensive analysis of loads to acquire their external characteristics for the purpose of modeling and analyzing power systems.The online identification method is a computer-involved approach for data collection,processing,and system identification,commonly used for adaptive control and prediction.This paper proposes a method for dynamically aggregating large-scale adjustable loads to support high proportions of new energy integration,aiming to study the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction methods.The experiment selected 300 central air conditioners as the research subject and analyzed their regulation characteristics,economic efficiency,and comfort.The experimental results show that as the adjustment time of the air conditioner increases from 5 minutes to 35 minutes,the stable adjustment quantity during the adjustment period decreases from 28.46 to 3.57,indicating that air conditioning loads can be controlled over a long period and have better adjustment effects in the short term.Overall,the experimental results of this paper demonstrate that analyzing the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction algorithms is effective.展开更多
The traditional methods for synthesizing flexible heat exchanger networks(HENs)are not directly applicable to inter-plant HEN challenges,primarily due to the spread of system uncertainty across plants via intermedium ...The traditional methods for synthesizing flexible heat exchanger networks(HENs)are not directly applicable to inter-plant HEN challenges,primarily due to the spread of system uncertainty across plants via intermedium fluid circles.This complicates the synthesis process significantly.To tackle this issue,this study proposes a decomposed stepwise methodology to facilitate the flexible synthesis of the interplant HENs performing indirect heat integration.A decomposition strategy is proposed to divide the overall network into manageable sub-networks by dissecting the intermedium fluid circles.To address the variability in intermedium fluid temperatures,a temperature fluctuation analysis approach is developed and a heuristic rule is introduced to maintain the temperature feasibility of the intermedium fluids.To ensure adequate flexibility and cost-effectiveness of the designed networks,flexibility analysis and network retrofit steps are conducted through model-based optimization techniques.The efficacy of the method is demonstrated through two case studies,showing its potential in achieving the desired operational flexibility for inter-plant HENs.展开更多
We introduce a factorized Smith method(FSM)for solving large-scale highranked T-Stein equations within the banded-plus-low-rank structure framework.To effectively reduce both computational complexity and storage requi...We introduce a factorized Smith method(FSM)for solving large-scale highranked T-Stein equations within the banded-plus-low-rank structure framework.To effectively reduce both computational complexity and storage requirements,we develop techniques including deflation and shift,partial truncation and compression,as well as redesign the residual computation and termination condition.Numerical examples demonstrate that the FSM outperforms the Smith method implemented with a hierarchical HODLR structured toolkit in terms of CPU time.展开更多
The feasibility of 5 kg β-SiC synthesized in one batch was demonstrated through igniting the mixture of Si, C-black and polytetrafluoroethylene （PTFE） under different nitrogen pressures. The effect of experimental ...The feasibility of 5 kg β-SiC synthesized in one batch was demonstrated through igniting the mixture of Si, C-black and polytetrafluoroethylene （PTFE） under different nitrogen pressures. The effect of experimental parameters, including the contents of PTFE, nitrogen pressure, preheating, and raw materials distribution forms were investigated. The results show that the products are β-SiC with equiaxed grains. The average grain size is less than 200 nm. The powders loaded loosely promote reaction heat dispersing, resulting in small grains. High purity β-SiC powders are obtained when the PTFE content is as low as 5wt%, which simplifies the process and decreases the cost effectively. The ceramic sintered from the obtained β-SiC powders presents the hardness of 22.20 GPa, the bending strength as high as 715.15 MPa and the fracture toughness of 8.179 MPa·m^1/2, which are higher than those of ceramics fabricated with α-SiC produced by combustion synthesis.展开更多
The developing status of world large-scale methanol production technology is analyzed and Linda's JW low-pressure methanol synthesis reactor with uniform temperature is described. JW serial reactors have been succ...The developing status of world large-scale methanol production technology is analyzed and Linda's JW low-pressure methanol synthesis reactor with uniform temperature is described. JW serial reactors have been successfully introduced in and applied in Harbin Gasification Plant and the productivity has been increased by 50% and now nine sets of equipments are successfully running in Harbin Gasification Plant,Jiangsu Xinya, Shandong Kenli,Henan Zhongyuan, Handan Xinyangguang,' Shanxi Weihua and Inner Mongolia Tianye. Now it has manufacturing the reactors of 300,000 t/a for Liaoning Dahua. Some solutions for the structure problems of 1000 ～5000 t/d methanol synthesis rectors are put forward.展开更多
The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according...The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.展开更多
Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms（PKMs）, but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method fo...Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms（PKMs）, but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method for engineering application is a very challenging issue, which should be further studied in the field. Grassmann line geometry, which can investigate the dimensions of spatial line-clusters in a concise way, is taken as the mathematic foundation. Atlas method is introduced to visually describe the degrees of freedom（DOFs） and constraints of a mechanism, and the dual rule is brought in to realize the mutual conversion of the freedom-space and constraint-space. Consequently, a systematic method based on Grassmann line geometry and Atlas method is generated and the entire type synthesis process is presented. Three type 4-DOF PKMs, i.e., 1T3R, 2T2R and 3T1R（T： translational DOF; R： rotational DOF）, are classified according to the different combinations of the translational DOFs and rotational DOFs. The type synthesis of 4-DOF PKMs is carried out and the possible configurations are thoroughly investigated. Some new PKMs with useful functions are generated during this procedure. The type synthesis method based on Grassmann line geometry and Atlas method is intuitive and concise, and can reduce the complexity of the PKMs＇ type synthesis. Moreover, this method can provide theoretical guidance for other PKMs＇ type synthesis and engineering application. A novel type synthesis method is proposed, which solves the existing methods＇ problems in terms of complicated, not intuitive and unsuitable for practical application.展开更多
The effect of synthesis methods on the activity of V/Ce/WTi catalysts was investigated for the selective catalytic reduction（SCR） of NO_x by NH_3. V/Ce/WTi-DP（deposition precipitation） catalyst showed excellent NH...The effect of synthesis methods on the activity of V/Ce/WTi catalysts was investigated for the selective catalytic reduction（SCR） of NO_x by NH_3. V/Ce/WTi-DP（deposition precipitation） catalyst showed excellent NH_3-SCR performance, especially the better medium-temperature activity and the less N_2O formation than V/Ce/WTi-IMP（impregnation）. These catalysts were characterized by X-ray diffraction（XRD）, Brumauer-Emmett-Teller（BET）, X-ray photoelectron spectroscopy（XPS）, temperature-programmed reduction（H_2-TPR）, and in situ DRIFTS techniques. The XPS and H_2-TPR results revealed that V/Ce/WTi-DP exhibited more surface Ce species, higher level of Oα and higher reducibility of Ce species. Reflected by in situ DRIFTS results, the deposition precipitation method（DP） contributed to a greater amount of weakly adsorbed NO_2, monodentate nitrate and NH_3 species with better reactive activity. Meanwhile, the cis-N_2O_2^（2-） species, an intermediate for N_2O formation, was very limited. As a result, these advantages brought about the superior SCR activity and N_2 selectivity for V/Ce/WTi-DP.展开更多
Using cetyltrimethylammonium bromide （CTAB） as the template agent, cerium nitrate as the cerium resource, yttrium nitrate as the yttrium resource, and ammonium carbonate as the precipitating agent, mesoporous CeO2 p...Using cetyltrimethylammonium bromide （CTAB） as the template agent, cerium nitrate as the cerium resource, yttrium nitrate as the yttrium resource, and ammonium carbonate as the precipitating agent, mesoporous CeO2 powders doped with different yttrium contents were successfully synthesized using a chemical precipitation method, under an alkalescent condition. Properties of the obtained samples were characterized and analyzed with X-ray diffraction （XRD）, energy dispersive analysis of X-rays （EDAX）, transmission electron microscopy （TEM）, infrared （IR） absorbance, and the BET method. For the prepared samples with 20% （molar ratio） Y-doped content, a BET specific surface area of 106. 6 m^2 · g^- 1, with an average pore size of3~27 nm were obtained. XRD patterns showed that the doped samples were with a cubic fluorite structure. TEM micrographs revealed that the doped samples showed a spherical morphology with a diameter ranging from 20 to 30 nm and a round pore shape. IR results indicated that the Ce-O-Ce vibration intensity decreased as the Y-doped content increased. N2 adsorption-desorption isotherms showed that the samples possessed typical mesopore characteristics. The average pore size of the samples decreased alter mesoporous CeO2 was doped with yttrium, and the average pore size decreased largely as the Y-doped content increased.展开更多
SiO2-CaO-MgO glass and glass-ceramic powder doped with Nd3＋ were synthesized with sol-gel method. Tetraethylorthosilicate （TEOS）, Ca（NO3）2？4H2O, Mg（NO3）2？6H2O, Nd（NO3）3？6H2O, ethanol, distilled water, and ...SiO2-CaO-MgO glass and glass-ceramic powder doped with Nd3＋ were synthesized with sol-gel method. Tetraethylorthosilicate （TEOS）, Ca（NO3）2？4H2O, Mg（NO3）2？6H2O, Nd（NO3）3？6H2O, ethanol, distilled water, and HNO3 were used as starting materials. The synthesized powder’s properties were examined with simultaneous thermal analysis （STA）, X-ray diffraction （XRD）, photoluminescence （PL） and scanning electron microscopy （SEM） analysis. The STA curves showed that the softening point and crystallization temperatures were shifted to higher temperatures with increasing dopant content. Regarding XRD patterns of glass samples, Nd was found to act as an intermediate oxide in glass matrix. The XRD patterns of glass-ceramic samples indicated that bredigite and akermanite crystallized in the glass matrix after heat treating at 900 oC. The fluorescence spectra showed that glass-ceramics emitted much stronger irradiation than glasses with the same dopant content. The SEM images illustrated uniform and homogeneous distribution of applied oxides in glass and glass-ceramic compositions.展开更多
The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms,or using screw theory to perform multiple getti...The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms,or using screw theory to perform multiple getting intersection and union to complete type synthesis.The number of redundant parallel mechanisms obtained by these two methods is limited.In this paper,based on Grassmann line geometry and Atlas method,a novel and effective method for type synthesis of redundant actuated parallel mechanisms(PMs)with closed-loop units is proposed.Firstly,the degree of freedom(DOF)and constraint line graph of the moving platform are determined successively,and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph,and a branch constraint allocation scheme is formulated based on the allocation criteria.Secondly,a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units.Finally,the branch chains that meet the requirements of branch chains configuration criteria and F&C(degree of freedom&constraint)line graph are assembled.In this paper,two types of 2 rotational and 1 translational(2R1T)redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational(2T1R)redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples,and 238,92 and 15 new configurations were synthesized.All the mechanisms contain closed-loop units,and the mechanisms and the actuators both have good symmetry.Therefore,all the mechanisms have excellent comprehensive performance,in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled.The instantaneous analysis shows that all mechanisms are not instantaneous,which proves the feasibility and practicability of the method.展开更多
With the recent advancement in nanotechnology,nanoparticles(NPs)offer an ample variety of smart functions than conventional materials in various aspects.As compared to larger particles,NPs possess unique characteristi...With the recent advancement in nanotechnology,nanoparticles(NPs)offer an ample variety of smart functions than conventional materials in various aspects.As compared to larger particles,NPs possess unique characteristics and excellent abilities,such as low toxicity,chemical stability,surface functionality,and biocompatibility.These advantageous properties allow them to be widely utilized in many applications,including biomedical applications,energy applications,IT applications,and industrial applications.In order to fulfill the increasing demands of NP applications,existing NP synthesis methods need to be improved based on the requirements of different applications to further their usage.A comprehensive understanding of the relationships between synthesis parameters and properties of NPs can help us better fine-tune them with designed properties and minimal toxicity.This review paper will discuss the commonly used synthesis methods of functionalized NPs,as well as future directions and challenges to develop various synthesis methods further.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12302435 and 12221002)。
文摘Shock wave caused by a sudden release of high-energy,such as explosion and blast,usually affects a significant range of areas.The utilization of a uniform fine mesh to capture sharp shock wave and to obtain precise results is inefficient in terms of computational resource.This is particularly evident when large-scale fluid field simulations are conducted with significant differences in computational domain size.In this work,a variable-domain-size adaptive mesh enlargement(vAME)method is developed based on the proposed adaptive mesh enlargement(AME)method for modeling multi-explosives explosion problems.The vAME method reduces the division of numerous empty areas or unnecessary computational domains by adaptively suspending enlargement operation in one or two directions,rather than in all directions as in AME method.A series of numerical tests via AME and vAME with varying nonintegral enlargement ratios and different mesh numbers are simulated to verify the efficiency and order of accuracy.An estimate of speedup ratio is analyzed for further efficiency comparison.Several large-scale near-ground explosion experiments with single/multiple explosives are performed to analyze the shock wave superposition formed by the incident wave,reflected wave,and Mach wave.Additionally,the vAME method is employed to validate the accuracy,as well as to investigate the performance of the fluid field and shock wave propagation,considering explosive quantities ranging from 1 to 5 while maintaining a constant total mass.The results show a satisfactory correlation between the overpressure versus time curves for experiments and numerical simulations.The vAME method yields a competitive efficiency,increasing the computational speed to 3.0 and approximately 120,000 times in comparison to AME and the fully fine mesh method,respectively.It indicates that the vAME method reduces the computational cost with minimal impact on the results for such large-scale high-energy release problems with significant differences in computational domain size.
基金Supported by the National Natural Science Foundation of China(No.51108089)Doctoral Programs Foundation of Ministry of Education of China(No.20113514120005)the Foundation of the Education Department of Fujian Province(No.JA14057)
文摘Free-interface dual-compatibility modal synthesis method(compatibility of both force and displacement on interfaces)is introduced to large-scale civil engineering structure to enhance computation efficiency. The basic equations of the method are first set up, and then the mode cut-off principle and the dividing principle are proposed. MATLAB is used for simulation in different frame structures. The simulation results demonstrate the applicability of this substructure method to civil engineering structures and the correctness of the proposed mode cut-off principle. Studies are also conducted on how to divide the whole structure for better computation efficiency while maintaining better precision. It is observed that the geometry and material properties should be considered, and the synthesis results would be more precise when the inflection points of the mode shapes are taken into consideration. Furthermore, the simulation performed on a large-scale high-rise connected structure further proves the feasibility and efficiency of this modal synthesis method compared with the traditional global method. It is also concluded from the simulation results that the fewer number of DOFs in each substructure will result in better computation efficiency, but too many substructures will be time-consuming due to the tedious synthesis procedures. Moreover, the substructures with free interface will introduce errors and reduce the precision dramatically, which should be avoided.
基金National Key Research and Development Program of China(No.2020YFE0205300)Heilongjiang Provincial Natural Science Foundation of China(No.YQ2022E024)+1 种基金Chongqing Natural Science Foundation of China(No.cstc2021jcyj-msxmX1002)Fundamental Research Funds for the Central Universities(No.AUGA5710051221).
文摘High-entropy alloy nanoparticles(HEA NPs)containing four or more elements possess several advantages over traditional alloy nanoparticles(NPs),such as higher strength,greater thermal stability,enhanced ox-idation resistance,stronger catalytic activity,and greater flexibility in adjusting element composition and composition ratio.However,the development of HEA NPs has been limited by preparation difficulties caused by the challenge of achieving complete miscibility between multiple-component elements and the unique high-entropy states.In this review,we provide a comprehensive summary of recent break-throughs in synthesizing and fabricating HEA NPs.We describe the experimental procedures and princi-ples of various synthesis methods,including furnace pyrolysis,carbothermal shock(CTS)method,pulse laser,solvothermal method,microwave heating,hydrogen spillover-driven,sputtering deposition,anneal-ing on mesoporous materials,arc discharge methods and using liquid metal.Additionally,we delve into recent improvements made to some of these methods or novel NPs synthesized using them.Finally,we review the current applications of HEA NPs and provide insights into potential applications of this rapidly emerging research field.
基金supported by Basic Frontier Scientific Research of the Chinese Academy of Sciences(ZDBS-LY-JSC041)the National Natural Science Foundation of China(22178348)+1 种基金the open research fund of the State Key Laboratory of Mesoscience and Engineering(MESO-23-D06)the Youth Innovation Promotion Association CAS(292021000085)。
文摘Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of high-quality TiC powders with low cost and high efficiency is crucial for industrial applications;however major challenges face its realization.Herein,the methods for synthesizing TiC powders based on a reaction system are reviewed.This analysis is focused on the underlying mechanisms by which synthesis methods affect the quality of powders.Notably,strategies for improving the synthesis of highquality powders are analyzed from the perspective of enhancing heat and mass transfer processes.Furthermore,the critical issues,challenges,and development trends of the synthesis technology and application of high-quality TiC powder are discussed.
基金The Australian Research Council(DP200101197,DP230101107).
文摘Formalizing complex processes and phenomena of a real-world problem may require a large number of variables and constraints,resulting in what is termed a large-scale optimization problem.Nowadays,such large-scale optimization problems are solved using computing machines,leading to an enormous computational time being required,which may delay deriving timely solutions.Decomposition methods,which partition a large-scale optimization problem into lower-dimensional subproblems,represent a key approach to addressing time-efficiency issues.There has been significant progress in both applied mathematics and emerging artificial intelligence approaches on this front.This work aims at providing an overview of the decomposition methods from both the mathematics and computer science points of view.We also remark on the state-of-the-art developments and recent applications of the decomposition methods,and discuss the future research and development perspectives.
基金Supported by Natural Science Foundation of Shandong Province of China(Grant Nos.ZR2020MF080 and ZR2020MF065).
文摘The dynamic behaviors of a large-scale ring neural network with a triangular coupling structure are investigated.The characteristic equation of the high-dimensional system using Coate’s flow graph method is calculated.Time delay is selected as the bifurcation parameter,and sufficient conditions for stability and Hopf bifurcation are derived.It is found that the connection coefficient and time delay play a crucial role in the dynamic behaviors of the model.Furthermore,a phase diagram of multiple equilibrium points with one saddle point and two stable nodes is presented.Finally,the effectiveness of the theory is verified through simulation results.
文摘Against the backdrop of increasingly prominent global energy shortages and environmental issues,the development of efficient energy conversion and storage technologies has become crucial.Zero-dimensional(0D)metal oxide composites exhibit significant application value in the field of energy chemistry due to their unique properties,such as quantum size effect and high specific surface area.From a broad perspective,this paper reviews the main synthesis methods of these composites,including sol-gel method,hydrothermal/solvothermal method,precipitation method,and template method,while analyzing the characteristics of each method.It further discusses their applications in photocatalytic hydrogen production,fuel cells,lithium-ion batteries,and supercapacitors.Additionally,the current challenges,such as material dispersibility and interface bonding,are pointed out,and future development directions are prospected,aiming to provide references for related research.
基金supported by the State Grid Science&Technology Project(5100-202114296A-0-0-00).
文摘This article introduces the concept of load aggregation,which involves a comprehensive analysis of loads to acquire their external characteristics for the purpose of modeling and analyzing power systems.The online identification method is a computer-involved approach for data collection,processing,and system identification,commonly used for adaptive control and prediction.This paper proposes a method for dynamically aggregating large-scale adjustable loads to support high proportions of new energy integration,aiming to study the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction methods.The experiment selected 300 central air conditioners as the research subject and analyzed their regulation characteristics,economic efficiency,and comfort.The experimental results show that as the adjustment time of the air conditioner increases from 5 minutes to 35 minutes,the stable adjustment quantity during the adjustment period decreases from 28.46 to 3.57,indicating that air conditioning loads can be controlled over a long period and have better adjustment effects in the short term.Overall,the experimental results of this paper demonstrate that analyzing the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction algorithms is effective.
基金financial support provided by the National Natural Science Foundation of China(22378045,22178045).
文摘The traditional methods for synthesizing flexible heat exchanger networks(HENs)are not directly applicable to inter-plant HEN challenges,primarily due to the spread of system uncertainty across plants via intermedium fluid circles.This complicates the synthesis process significantly.To tackle this issue,this study proposes a decomposed stepwise methodology to facilitate the flexible synthesis of the interplant HENs performing indirect heat integration.A decomposition strategy is proposed to divide the overall network into manageable sub-networks by dissecting the intermedium fluid circles.To address the variability in intermedium fluid temperatures,a temperature fluctuation analysis approach is developed and a heuristic rule is introduced to maintain the temperature feasibility of the intermedium fluids.To ensure adequate flexibility and cost-effectiveness of the designed networks,flexibility analysis and network retrofit steps are conducted through model-based optimization techniques.The efficacy of the method is demonstrated through two case studies,showing its potential in achieving the desired operational flexibility for inter-plant HENs.
基金Supported partly by NSF of China(Grant No.11801163)NSF of Hunan Province(Grant Nos.2021JJ50032,2023JJ50164 and 2023JJ50165)Degree&Postgraduate Reform Project of Hunan University of Technology and Hunan Province(Grant Nos.JGYB23009 and 2024JGYB210).
文摘We introduce a factorized Smith method(FSM)for solving large-scale highranked T-Stein equations within the banded-plus-low-rank structure framework.To effectively reduce both computational complexity and storage requirements,we develop techniques including deflation and shift,partial truncation and compression,as well as redesign the residual computation and termination condition.Numerical examples demonstrate that the FSM outperforms the Smith method implemented with a hierarchical HODLR structured toolkit in terms of CPU time.
文摘The feasibility of 5 kg β-SiC synthesized in one batch was demonstrated through igniting the mixture of Si, C-black and polytetrafluoroethylene （PTFE） under different nitrogen pressures. The effect of experimental parameters, including the contents of PTFE, nitrogen pressure, preheating, and raw materials distribution forms were investigated. The results show that the products are β-SiC with equiaxed grains. The average grain size is less than 200 nm. The powders loaded loosely promote reaction heat dispersing, resulting in small grains. High purity β-SiC powders are obtained when the PTFE content is as low as 5wt%, which simplifies the process and decreases the cost effectively. The ceramic sintered from the obtained β-SiC powders presents the hardness of 22.20 GPa, the bending strength as high as 715.15 MPa and the fracture toughness of 8.179 MPa·m^1/2, which are higher than those of ceramics fabricated with α-SiC produced by combustion synthesis.
文摘The developing status of world large-scale methanol production technology is analyzed and Linda's JW low-pressure methanol synthesis reactor with uniform temperature is described. JW serial reactors have been successfully introduced in and applied in Harbin Gasification Plant and the productivity has been increased by 50% and now nine sets of equipments are successfully running in Harbin Gasification Plant,Jiangsu Xinya, Shandong Kenli,Henan Zhongyuan, Handan Xinyangguang,' Shanxi Weihua and Inner Mongolia Tianye. Now it has manufacturing the reactors of 300,000 t/a for Liaoning Dahua. Some solutions for the structure problems of 1000 ～5000 t/d methanol synthesis rectors are put forward.
文摘The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.
基金supported by National Natural Science Foundation of China(Grant No.51135008)National Basic Research Program of China(973 Program,Grant No.2013CB035400)China Postdoctoral Science Foundation(Grant Nos.2012M520256,2013T60107)
文摘Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms（PKMs）, but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method for engineering application is a very challenging issue, which should be further studied in the field. Grassmann line geometry, which can investigate the dimensions of spatial line-clusters in a concise way, is taken as the mathematic foundation. Atlas method is introduced to visually describe the degrees of freedom（DOFs） and constraints of a mechanism, and the dual rule is brought in to realize the mutual conversion of the freedom-space and constraint-space. Consequently, a systematic method based on Grassmann line geometry and Atlas method is generated and the entire type synthesis process is presented. Three type 4-DOF PKMs, i.e., 1T3R, 2T2R and 3T1R（T： translational DOF; R： rotational DOF）, are classified according to the different combinations of the translational DOFs and rotational DOFs. The type synthesis of 4-DOF PKMs is carried out and the possible configurations are thoroughly investigated. Some new PKMs with useful functions are generated during this procedure. The type synthesis method based on Grassmann line geometry and Atlas method is intuitive and concise, and can reduce the complexity of the PKMs＇ type synthesis. Moreover, this method can provide theoretical guidance for other PKMs＇ type synthesis and engineering application. A novel type synthesis method is proposed, which solves the existing methods＇ problems in terms of complicated, not intuitive and unsuitable for practical application.
基金supported by the Grant from the China Huadian Science and Technology Institute(CHDI.KJ-20)the National High-Tech Research and Development Program of China(863,2011AA03A405)
文摘The effect of synthesis methods on the activity of V/Ce/WTi catalysts was investigated for the selective catalytic reduction（SCR） of NO_x by NH_3. V/Ce/WTi-DP（deposition precipitation） catalyst showed excellent NH_3-SCR performance, especially the better medium-temperature activity and the less N_2O formation than V/Ce/WTi-IMP（impregnation）. These catalysts were characterized by X-ray diffraction（XRD）, Brumauer-Emmett-Teller（BET）, X-ray photoelectron spectroscopy（XPS）, temperature-programmed reduction（H_2-TPR）, and in situ DRIFTS techniques. The XPS and H_2-TPR results revealed that V/Ce/WTi-DP exhibited more surface Ce species, higher level of Oα and higher reducibility of Ce species. Reflected by in situ DRIFTS results, the deposition precipitation method（DP） contributed to a greater amount of weakly adsorbed NO_2, monodentate nitrate and NH_3 species with better reactive activity. Meanwhile, the cis-N_2O_2^（2-） species, an intermediate for N_2O formation, was very limited. As a result, these advantages brought about the superior SCR activity and N_2 selectivity for V/Ce/WTi-DP.
基金Project supported by the International Cooperation of Science and Technology Ministry PRC (2005DFBA028)the National Natural Science Foundation of China (59925412)
文摘Using cetyltrimethylammonium bromide （CTAB） as the template agent, cerium nitrate as the cerium resource, yttrium nitrate as the yttrium resource, and ammonium carbonate as the precipitating agent, mesoporous CeO2 powders doped with different yttrium contents were successfully synthesized using a chemical precipitation method, under an alkalescent condition. Properties of the obtained samples were characterized and analyzed with X-ray diffraction （XRD）, energy dispersive analysis of X-rays （EDAX）, transmission electron microscopy （TEM）, infrared （IR） absorbance, and the BET method. For the prepared samples with 20% （molar ratio） Y-doped content, a BET specific surface area of 106. 6 m^2 · g^- 1, with an average pore size of3~27 nm were obtained. XRD patterns showed that the doped samples were with a cubic fluorite structure. TEM micrographs revealed that the doped samples showed a spherical morphology with a diameter ranging from 20 to 30 nm and a round pore shape. IR results indicated that the Ce-O-Ce vibration intensity decreased as the Y-doped content increased. N2 adsorption-desorption isotherms showed that the samples possessed typical mesopore characteristics. The average pore size of the samples decreased alter mesoporous CeO2 was doped with yttrium, and the average pore size decreased largely as the Y-doped content increased.
基金supported by the Iran Nanotechnology Initiative Council(INIC)
文摘SiO2-CaO-MgO glass and glass-ceramic powder doped with Nd3＋ were synthesized with sol-gel method. Tetraethylorthosilicate （TEOS）, Ca（NO3）2？4H2O, Mg（NO3）2？6H2O, Nd（NO3）3？6H2O, ethanol, distilled water, and HNO3 were used as starting materials. The synthesized powder’s properties were examined with simultaneous thermal analysis （STA）, X-ray diffraction （XRD）, photoluminescence （PL） and scanning electron microscopy （SEM） analysis. The STA curves showed that the softening point and crystallization temperatures were shifted to higher temperatures with increasing dopant content. Regarding XRD patterns of glass samples, Nd was found to act as an intermediate oxide in glass matrix. The XRD patterns of glass-ceramic samples indicated that bredigite and akermanite crystallized in the glass matrix after heat treating at 900 oC. The fluorescence spectra showed that glass-ceramics emitted much stronger irradiation than glasses with the same dopant content. The SEM images illustrated uniform and homogeneous distribution of applied oxides in glass and glass-ceramic compositions.
基金Supported by National Natural Science Foundation of China(Grant No.51875499).
文摘The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms,or using screw theory to perform multiple getting intersection and union to complete type synthesis.The number of redundant parallel mechanisms obtained by these two methods is limited.In this paper,based on Grassmann line geometry and Atlas method,a novel and effective method for type synthesis of redundant actuated parallel mechanisms(PMs)with closed-loop units is proposed.Firstly,the degree of freedom(DOF)and constraint line graph of the moving platform are determined successively,and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph,and a branch constraint allocation scheme is formulated based on the allocation criteria.Secondly,a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units.Finally,the branch chains that meet the requirements of branch chains configuration criteria and F&C(degree of freedom&constraint)line graph are assembled.In this paper,two types of 2 rotational and 1 translational(2R1T)redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational(2T1R)redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples,and 238,92 and 15 new configurations were synthesized.All the mechanisms contain closed-loop units,and the mechanisms and the actuators both have good symmetry.Therefore,all the mechanisms have excellent comprehensive performance,in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled.The instantaneous analysis shows that all mechanisms are not instantaneous,which proves the feasibility and practicability of the method.
文摘With the recent advancement in nanotechnology,nanoparticles(NPs)offer an ample variety of smart functions than conventional materials in various aspects.As compared to larger particles,NPs possess unique characteristics and excellent abilities,such as low toxicity,chemical stability,surface functionality,and biocompatibility.These advantageous properties allow them to be widely utilized in many applications,including biomedical applications,energy applications,IT applications,and industrial applications.In order to fulfill the increasing demands of NP applications,existing NP synthesis methods need to be improved based on the requirements of different applications to further their usage.A comprehensive understanding of the relationships between synthesis parameters and properties of NPs can help us better fine-tune them with designed properties and minimal toxicity.This review paper will discuss the commonly used synthesis methods of functionalized NPs,as well as future directions and challenges to develop various synthesis methods further.
