Poly(lactide acid)(PLA)foams have shown considerable promise as eco-friendly alternatives to nondegradable plastic foams,such as polystyrene(PS)foams.Nevertheless,PLA foam typically suffers from low heat-resistance an...Poly(lactide acid)(PLA)foams have shown considerable promise as eco-friendly alternatives to nondegradable plastic foams,such as polystyrene(PS)foams.Nevertheless,PLA foam typically suffers from low heat-resistance and poor cellular structure stemming from its inherent slow crystallization rate and low melt strength.In this study,a high-performance PLA foam with well-defined cell morphology,exceptional strength and enhanced heat-resistance was successfully fabricated via a core-back microcellular injection molding(MIM)process.Differential scanning calorimetry(DSC)results revealed that the added hydrazine-based nucleating agent(HNA)significantly increased the crystallization temperature and accelerated the crystallization process of PLA.Remarkably,the addition of a 1.5 wt%of HNA led to a significant reduction in PLA’s cell size,from 43.5µm to 2.87µm,and a remarkable increase in cell density,from 1.08×10^(7)cells/cm^(3)to 2.15×10^(10)cells/cm^(3).This enhancement resulted in a final crystallinity of approximately 55.7%for the PLA blend foam,a marked improvement compared to the pure PLA foam.Furthermore,at 1.5 wt%HNA concentration,the tensile strength and tensile toughness of PLA blend foams demonstrated remarkable improvements of 136%and 463%,respectively.Additionally,the Vicat softening temperature of PLA blend foam increased significantly to 134.8°C,whereas the pure PLA foam exhibited only about 59.7℃.These findings underscore the potential for the preparation of lightweight injection-molded PLA foam with enhanced toughness and heat-resistance,which offers a viable approach for the production of high-performance PLA foams suitable for large-scale applications.展开更多
L-lactide was prepared from L-lactic acid with stannous octoate as the catalyst. The effects of reaction temperature and pressure on the ingredient of crude lactide were investigated. The results show that the mass fr...L-lactide was prepared from L-lactic acid with stannous octoate as the catalyst. The effects of reaction temperature and pressure on the ingredient of crude lactide were investigated. The results show that the mass fraction of meso-lactide increases with the increasing reaction temperature. Crude lactide containing 85.4% L-lactide is obtained when the reaction temperature is 200 ℃. High purity of L-lactide with a yield of 40.6 % is obtained by synthetic purifying method. The properties of L-lactide are characterized by optical purity, infrared spectrum and gas chromatogram/mass spectrum. The L-lactide samples purified by recrystallization and synthetic purifying methods are polymerized with the catalyst of stannous octoate, and the corresponding viscosity average relative molecular masses of poly(L-lactide) are 2.85 × 105 and 5.05 × 105 , respectively. This indicates that the optical purity of Llactide has great influence on the relative molecular mass of poly(L-lactide).展开更多
(D, L)-Lactide (LA) was first polymerized with one component of rare earth catalysts [Nd(naph)(3), Nd(oct)(3), Nd(O-iPr)(3), Nd(AcAc)(3), Y(AcAc)(3), Sm(AcAc)(3), Er(AcAc)(3))] respectively in solution and in melt sta...(D, L)-Lactide (LA) was first polymerized with one component of rare earth catalysts [Nd(naph)(3), Nd(oct)(3), Nd(O-iPr)(3), Nd(AcAc)(3), Y(AcAc)(3), Sm(AcAc)(3), Er(AcAc)(3))] respectively in solution and in melt state. The effects of [Cat]/[La] molar ratio, solvents, polymerization time, temperature, various rare earth Elements and ligands were investigated in detail. The results showed that both the conversion of polymerization and the molecular weight (MW) of poly (D, L-Lactide) (PLA) in melt polymerization are higher than that in solution polymerization, but the polymerization rate in melt was lower than in solution. The molecular weight distribution (MWD) of PLA is broader with increasing temperature. X-ray study indicated that PLA obtained by Nd(AcAc)(3) in melt polymerization is an amorphous polymer.展开更多
In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization （ROP） of lactide and block polymerization of poly（lact...In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization （ROP） of lactide and block polymerization of poly（lactide） with po/y（ethylene glycol）methyl ether,展开更多
Poly (L-lactide) was prepared by bulk polymerization ofL-lactide at 140°C in the presence of stannous octoate. The polymer products were characterized by number average molecular weight Mn, weight average molecul...Poly (L-lactide) was prepared by bulk polymerization ofL-lactide at 140°C in the presence of stannous octoate. The polymer products were characterized by number average molecular weight Mn, weight average molecular weight Mw and molecular weight distribution MWD (M w/M n) respectively. The results showed that stannous octoate was a high effective catalyst, and coordinated insertion mechanism of the reaction was proposed.展开更多
A series of zinc silylamido complexes based upon NNO tridentate enolic Schiff base framework have been synthesized and characterized. These complexes were tested for the ring opening polymerization of lactide and e-ca...A series of zinc silylamido complexes based upon NNO tridentate enolic Schiff base framework have been synthesized and characterized. These complexes were tested for the ring opening polymerization of lactide and e-caprolactone, exhibiting notably high activity at ambient temperature, The influence of imine bridge length and substituents of diketone over the course of polymerization was investigated in details. Remarkably, 4a was confirmed to be a rare example of exceedingly active and robust zinc catalysts, achieving major transformation of lactide under extremely low loading （0.025 mol%） within 18 rain. The influence of various monomers as well as the polymerization mechanism have also been discussed.展开更多
Structure and properties of bioabsorbable polyglycolide (PGA) and poly(glycolide-co-lactide) (PGA-co-PLA)fibers were investigated during several industrial processing stages and in vitro degradation by means of wide-a...Structure and properties of bioabsorbable polyglycolide (PGA) and poly(glycolide-co-lactide) (PGA-co-PLA)fibers were investigated during several industrial processing stages and in vitro degradation by means of wide-angle X-raydiffraction (WAXD), dynamic mechanical analysis (DMA) and mechanical property tests. In the orientation stage, the PGAfibers were found to have higher degrees of crystallinity than corresponding PGA-co-PLA samples produced under similarconditions. In the hot-stretching and post-annealing stages, after fibers were braided, PGA samples were found to gain morecrystallinity and higher T_g than PGA-co-PLA samples. The higher crystallinity in PGA fibers resulted in a slower rate ofdegradation. DMA results showed that a great deal of internal stress that was built during orientation and hot-stretchingstages was released in the post-annealing stage for a1l PGA and PGA-co-PLA samples. During earlier stages of in vitrodegradation, both PGA and PGA-co-PLA samples exhibited the typical cleavage-induced crystallization mechanism. Theheat shrinkage in the glass transition area was found to disappear after 6-8 days of degradation for all PGA and PGA-co-PLAsamples, indicating the amorphous portions of the polymers lost orientation after a short period in the buffer solution, mostlikely due to relaxation of the cleaved chains.展开更多
Amine elimination of Ln[N(SiMe3)2]3(μ-Cl)Li(THF)3 with aminophenol H[ON]{H[ON]=2-(CH2 NC5 H10)-4,6-tBu2-C6 H3OH}in 1:2 molar ratio in THF gave the monometallic rare-earth metal amide complexes[ON]2 LnN(SiMe3)2(Ln=Yb(...Amine elimination of Ln[N(SiMe3)2]3(μ-Cl)Li(THF)3 with aminophenol H[ON]{H[ON]=2-(CH2 NC5 H10)-4,6-tBu2-C6 H3OH}in 1:2 molar ratio in THF gave the monometallic rare-earth metal amide complexes[ON]2 LnN(SiMe3)2(Ln=Yb(1),Y(2),Gd(3),Sm(4),Nd(5))in 57%-73%isolated yields.All these complexes were characterized by elemental analysis.The molecular structures of complexes 1-4 were determined by single crystal X-ray diffraction.These complexes are highly active for L-Iactide polymerization to give high molecular weight polymers with unimodal molecular weight distributions.In addition,these complexes can also initiate rac-lactide polymerization with high activity to afford heterotactic-rich polylactides.展开更多
Novel bio-based and biodegradable block copolymers were synthesized by "click" reaction between poly(L-lactide)(PLLA) and polyamide 4(PA4). Upon tuning the molar mass of PLLA block, the properties of copolym...Novel bio-based and biodegradable block copolymers were synthesized by "click" reaction between poly(L-lactide)(PLLA) and polyamide 4(PA4). Upon tuning the molar mass of PLLA block, the properties of copolymers and electrospun ultrafine fibers were investigated and compared with those of PLLA and PA4 blends. PLLA and PA4 were found incompatible and formed individual crystalline regions, along with reciprocal inhibition in crystallization. Electrospun fibers were highly hydrophobic, even if hydrophilic PA4 was the rich component. The crystallinity of either PLLA or PA4 decreased after electrospinning and PLLA-rich as-spun fibers were almost amorphous. Immersion tests proved that fibers of block copolymers were relatively homogeneous with micro-phase separation between PLLA and PA4. The fibrous structures of copolymers were different from those of the fibers electrospun from blends, for which sheath-core structure induced by macro-phase separation between homopolymers of PLLA and PA4 was confirmed by TEM, EDS, and XPS.展开更多
Chemical upcycling of end-of-life poly(lactide) plastics to lactide,lactate ester and new poly(lactide)has been achieved by using magnesium bis[bis(trimethylsilyl)amide][Mg(HMDS)_(2)]as promoter.Mg(HMDS)2 showed high ...Chemical upcycling of end-of-life poly(lactide) plastics to lactide,lactate ester and new poly(lactide)has been achieved by using magnesium bis[bis(trimethylsilyl)amide][Mg(HMDS)_(2)]as promoter.Mg(HMDS)2 showed high efficiency in L-lactide polymerization and poly(lactide) depolymerization.Mg(HMDS)_(2)/Ph_(2) CHOH catalytic system displayed high ring-opening selectivity and the characteristic of immortal polymerization.Taking advantage of transesterification,depolymerizations of end-oflife poly(lactide) plastics to lactate ester (polymer to value-added chemicals) and lactide (polymer to monomer) were achieved with high yields.Besides,a new“depolymerization-repolymerization”strategy was proposed to directly transform poly(lactide) into new poly(lactide).This work provides a theoretical basis for the design of polymerization and depolymerization catalysts and promotes the development of degradable polymers.展开更多
Schiff-base metal complexes as efficient catalysts are widely used in ring-opening polymerization of cycle esters. The salen Fe complexes were formed with their excellent biocompatibility and less toxicity. A series o...Schiff-base metal complexes as efficient catalysts are widely used in ring-opening polymerization of cycle esters. The salen Fe complexes were formed with their excellent biocompatibility and less toxicity. A series of salen Fe complexes were designed in this work in order to study the activity and control of polymerization of lactide. The salen Fe complexes＇ activities changed with the ligands configuration and substituent groups.展开更多
The effects of the plasticizer poly(ethylene glycol)(PEG)on crystallization properties of equimolar poly(L-lactide)(PLLA)/poly(D-lactide)(PDLA)blends were investigated.Forma-tion of the stereocomplex-type poly(lactide...The effects of the plasticizer poly(ethylene glycol)(PEG)on crystallization properties of equimolar poly(L-lactide)(PLLA)/poly(D-lactide)(PDLA)blends were investigated.Forma-tion of the stereocomplex-type poly(lactide acid)(sc-PLA)crystallites was confirmed by Wide-angle X-ray diffraction(WAXD)and differential scanning calorimetry(DSC)analyses.Sc-PLA crystallites without any homochiral poly(lactide acid)(hc-PLA)formed,as the result of the incorporation of the plasticizer PEG(more than or equal to 10%(wt))at a processing temperature(240℃).More-over,when the Mw of PEG reached 1000 g·mol^(-1),the crystal-lizability of stereocomplex crystallites was the best.Isothermal crystallization kinetics further revealed that PEG could accelerate the crystallization rate of sc-PLA,with the optimum crystallization kinetic parameters being obtained at 10%(wt)PEG.Several crys-tallization kinetics equations were applied to describe the effect of PEG on the crystallization behavior of sc-PLA.The influence of PEG on the spherocrystal morphologies of sc-PLA was also inves-tigated using polarized optical microscopy.展开更多
Polyester-based biodegradable polyurethane （PU） with different hard segment ratios was selected to modify the impact toughness of poly（L-lactide） （PLLA）. The influence of blending composition and hard segment ra...Polyester-based biodegradable polyurethane （PU） with different hard segment ratios was selected to modify the impact toughness of poly（L-lactide） （PLLA）. The influence of blending composition and hard segment ratio of PU on the phase morphology, crystallization behavior and mechanical properties of PLLA/PU blends has been investigated systematically. The results showed that the PU particles were uniformly dispersed in PLLA matrix at a scale from sub- microns to several microns. The glass transition temperature of PU within these blends decreased compared to that of neat PU, but rose slightly with its content and hard segment ratio. The presence of PU retarded the crystallization ability of PLLA, whereas enhanced its elongation at break and impact resistance effectively. As the PU content reaches up to 30 wt%, the phenomenon of brittle-ductile transition occurred, resulting in a rougher fracture surface with the formation of fibril-like structure. Moreover, under the same concentrations, the elongation at break and impact strength of PLLA blends decreased slightly with the increase of hard segment ratio of PU.展开更多
The ring-opening polymerization of D, L-lactide in the melt was systematically investigated by using stannous octoate as the initiator. The molecular weight of poly (D, L-lactide) was characterized with M,. Mn and Mw ...The ring-opening polymerization of D, L-lactide in the melt was systematically investigated by using stannous octoate as the initiator. The molecular weight of poly (D, L-lactide) was characterized with M,. Mn and Mw respectively. The results indicated that five variables, namely purity of monomer, initiator to monomer ratio, vacuum level, polymerization temperature and polymerization time had different influences on the molecular weight and molecular weight distribution of poly(D. L-lactide).展开更多
The crystalline structure and morphology of the PLA crystallized isothermally from the glassy state on highly oriented PE substrates at 130℃ were investigated by means of optical microscopy, AFM and X-ray diffraction...The crystalline structure and morphology of the PLA crystallized isothermally from the glassy state on highly oriented PE substrates at 130℃ were investigated by means of optical microscopy, AFM and X-ray diffraction. The results indicate that the PE substrate influences the crystallization behavior of PLA remarkably, which leads to the growth of PLA crystals on PE substrate always in edge-on form rather than the twisted lamellar crystals from edge-on to flat-on when crystallizing the PLA on glass surface under the same condition. The edge-on PLA lamellae on the PE substrate are preferentially arranged with their long axes in the chain direction of the PE substrate crystals. It is further demonstrated that except for the different crystal orientation, the PE does not influence the crystalline modification and crystallinity of the PLA.展开更多
Poly(D,L-lactide) was synthesized by indirect method from D,L-lactic acid and characterized by infrared spectrum and proton nuclear magnetic resonance. The influences of monomer purity, initiator concentration, polyme...Poly(D,L-lactide) was synthesized by indirect method from D,L-lactic acid and characterized by infrared spectrum and proton nuclear magnetic resonance. The influences of monomer purity, initiator concentration, polymerization temperature and polymerization time on the relative molecular mass of poly(D, L-lactide) were investigated. The polylactide was made into porous materials by using solvent-casting particulate-leaching method. Under the optimized conditions, polylactides with a viscosity average molecular mass up to 1.82×105 are obtained and the results are fairly reproducible. Scanning electron microscope observation indicates that the sample is highly porous and well-distributed with good interconnections between pores and the pore size of porous materials is in the range from 200 μm to 500 μm and it can be used as scaffold for bone tissue engineering.展开更多
A novel biodegradable polymer--poly （ethene maleic acid ester-co-D,L-lactide acid） was synthesized by copolymerizing lactide and prepolymer, which was prepared by the condensation of maleic anhydride and glycol, usi...A novel biodegradable polymer--poly （ethene maleic acid ester-co-D,L-lactide acid） was synthesized by copolymerizing lactide and prepolymer, which was prepared by the condensation of maleic anhydride and glycol, using p-toluene sulphonic acid as a catalyst, attempting to improve the hydrophilicity, increase flexibility and modulate the degradation rate. FTIR,^1H NMR, MALLS and DSC were employed to characterize these polymers.展开更多
Antibacterial poly（D,L-lactide） （PDLLA） fibrous membranes were developed via electrospinning, followed by surface modification which involved plasma pretreatment, UV-induced graft copolymerization of 4-vinylpyridi...Antibacterial poly（D,L-lactide） （PDLLA） fibrous membranes were developed via electrospinning, followed by surface modification which involved plasma pretreatment, UV-induced graft copolymerization of 4-vinylpyridine （4VP） and quaternization of the grafted pyridine groups with hexylbromide. The success of modification with quaternized pyridinium groups on the PDLLA fibrous membranes was ascertained by X-ray photoelectron spectroscopy （XPS）. The antibacterial activities of these membranes were assessed against Gram-positive Staphylococcus aureus （S. aureus） and Gram-negative Escherichia coli （E. coli）. The PDLLA fibrous membranes modified with quatemized pyridinium groups showed antibacterial efficiency against both bacteria as high as 99.999%. The results demonstrated that the antibacterial activity was based on the interaction of the positive charge of pyridinium group and negatively charged cell membrane of bacteria, resulting in loss of membrane permeability and cell leakage.展开更多
The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide...The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide-angle X-ray diffraction （WAXD）. The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity. Under quiescent conditions, the morphology assumes different sized spherulites, and its crystallinity dramatically reduces with increasing the cooling rate. On the other hand, the shear flow increases the onset crystallization temperature, and enhances the final crystallinity. When the shear rate is above 5 s^-1, cylindrite-like crystals are observed, furthermore, their content depends on the cooling rate.展开更多
In the present work, the PLLA mesophase formation and its kinetics at the advent of a chain mobility accelerator （polyethylene glycol （PEG）） are investigated by wide angle X-ray diffraction （WAXD） and time-resol...In the present work, the PLLA mesophase formation and its kinetics at the advent of a chain mobility accelerator （polyethylene glycol （PEG）） are investigated by wide angle X-ray diffraction （WAXD） and time-resolved Fourier transform infrared spectroscopy （FTIR）. It is interestingly found that the presence of PEG could accelerate the formation of PLLA mesophase notably due to the enhanced chain mobility, giving rise to a substantially reduced half time （t0.5） of PLLA mesophase formation from 129 min to 8 min. The Avrami exponents （n） for the kinetics of mesophase formation are -0.5 for neat PLLA and 1 for PLLA/PEG, respectively, indicating that 1D-rod growth through heterogeneous nucleation occurs during formation of PLLA mesophase. Tensile testing demonstrates that PLLA mesophase could increase the tensile strength and modulus but decrease the elongation at break.展开更多
基金supported by the National Natural Science Foundation of China(No.52003280)the Zhejiang Provincial Natural Science Foundation of China(No.LQ21B040003)+1 种基金the S&T Innovation 2025 Major Special Programme of Ningbo(No.2021Z052)the Chinese Academy of Sciences Pioneer Hundred Talents Program.
文摘Poly(lactide acid)(PLA)foams have shown considerable promise as eco-friendly alternatives to nondegradable plastic foams,such as polystyrene(PS)foams.Nevertheless,PLA foam typically suffers from low heat-resistance and poor cellular structure stemming from its inherent slow crystallization rate and low melt strength.In this study,a high-performance PLA foam with well-defined cell morphology,exceptional strength and enhanced heat-resistance was successfully fabricated via a core-back microcellular injection molding(MIM)process.Differential scanning calorimetry(DSC)results revealed that the added hydrazine-based nucleating agent(HNA)significantly increased the crystallization temperature and accelerated the crystallization process of PLA.Remarkably,the addition of a 1.5 wt%of HNA led to a significant reduction in PLA’s cell size,from 43.5µm to 2.87µm,and a remarkable increase in cell density,from 1.08×10^(7)cells/cm^(3)to 2.15×10^(10)cells/cm^(3).This enhancement resulted in a final crystallinity of approximately 55.7%for the PLA blend foam,a marked improvement compared to the pure PLA foam.Furthermore,at 1.5 wt%HNA concentration,the tensile strength and tensile toughness of PLA blend foams demonstrated remarkable improvements of 136%and 463%,respectively.Additionally,the Vicat softening temperature of PLA blend foam increased significantly to 134.8°C,whereas the pure PLA foam exhibited only about 59.7℃.These findings underscore the potential for the preparation of lightweight injection-molded PLA foam with enhanced toughness and heat-resistance,which offers a viable approach for the production of high-performance PLA foams suitable for large-scale applications.
文摘L-lactide was prepared from L-lactic acid with stannous octoate as the catalyst. The effects of reaction temperature and pressure on the ingredient of crude lactide were investigated. The results show that the mass fraction of meso-lactide increases with the increasing reaction temperature. Crude lactide containing 85.4% L-lactide is obtained when the reaction temperature is 200 ℃. High purity of L-lactide with a yield of 40.6 % is obtained by synthetic purifying method. The properties of L-lactide are characterized by optical purity, infrared spectrum and gas chromatogram/mass spectrum. The L-lactide samples purified by recrystallization and synthetic purifying methods are polymerized with the catalyst of stannous octoate, and the corresponding viscosity average relative molecular masses of poly(L-lactide) are 2.85 × 105 and 5.05 × 105 , respectively. This indicates that the optical purity of Llactide has great influence on the relative molecular mass of poly(L-lactide).
基金This work was supported by the National Natural Science Foundation of China and the Laboratory of Rare-earth Chemistry and Physics,Changchun Institute of Applied Chemistry,Academia Sinica
文摘(D, L)-Lactide (LA) was first polymerized with one component of rare earth catalysts [Nd(naph)(3), Nd(oct)(3), Nd(O-iPr)(3), Nd(AcAc)(3), Y(AcAc)(3), Sm(AcAc)(3), Er(AcAc)(3))] respectively in solution and in melt state. The effects of [Cat]/[La] molar ratio, solvents, polymerization time, temperature, various rare earth Elements and ligands were investigated in detail. The results showed that both the conversion of polymerization and the molecular weight (MW) of poly (D, L-Lactide) (PLA) in melt polymerization are higher than that in solution polymerization, but the polymerization rate in melt was lower than in solution. The molecular weight distribution (MWD) of PLA is broader with increasing temperature. X-ray study indicated that PLA obtained by Nd(AcAc)(3) in melt polymerization is an amorphous polymer.
文摘In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization （ROP） of lactide and block polymerization of poly（lactide） with po/y（ethylene glycol）methyl ether,
文摘Poly (L-lactide) was prepared by bulk polymerization ofL-lactide at 140°C in the presence of stannous octoate. The polymer products were characterized by number average molecular weight Mn, weight average molecular weight Mw and molecular weight distribution MWD (M w/M n) respectively. The results showed that stannous octoate was a high effective catalyst, and coordinated insertion mechanism of the reaction was proposed.
基金financially supported by the National Natural Science Foundation of China(Nos.21574124,51503203 and51233004)
文摘A series of zinc silylamido complexes based upon NNO tridentate enolic Schiff base framework have been synthesized and characterized. These complexes were tested for the ring opening polymerization of lactide and e-caprolactone, exhibiting notably high activity at ambient temperature, The influence of imine bridge length and substituents of diketone over the course of polymerization was investigated in details. Remarkably, 4a was confirmed to be a rare example of exceedingly active and robust zinc catalysts, achieving major transformation of lactide under extremely low loading （0.025 mol%） within 18 rain. The influence of various monomers as well as the polymerization mechanism have also been discussed.
基金This research was made possible by a Johnson & Johnson CORD Internship Award funded by Ethicon. BH and BF thank the National Science Foundation for partial financial support (DMR-0098104).
文摘Structure and properties of bioabsorbable polyglycolide (PGA) and poly(glycolide-co-lactide) (PGA-co-PLA)fibers were investigated during several industrial processing stages and in vitro degradation by means of wide-angle X-raydiffraction (WAXD), dynamic mechanical analysis (DMA) and mechanical property tests. In the orientation stage, the PGAfibers were found to have higher degrees of crystallinity than corresponding PGA-co-PLA samples produced under similarconditions. In the hot-stretching and post-annealing stages, after fibers were braided, PGA samples were found to gain morecrystallinity and higher T_g than PGA-co-PLA samples. The higher crystallinity in PGA fibers resulted in a slower rate ofdegradation. DMA results showed that a great deal of internal stress that was built during orientation and hot-stretchingstages was released in the post-annealing stage for a1l PGA and PGA-co-PLA samples. During earlier stages of in vitrodegradation, both PGA and PGA-co-PLA samples exhibited the typical cleavage-induced crystallization mechanism. Theheat shrinkage in the glass transition area was found to disappear after 6-8 days of degradation for all PGA and PGA-co-PLAsamples, indicating the amorphous portions of the polymers lost orientation after a short period in the buffer solution, mostlikely due to relaxation of the cleaved chains.
基金Project supported by the National Natural Science Foundation of China(21572205,21971130,21871198,21674070)the Natural Science Foundation of Zhejiang Province(LY19B040002)+2 种基金the State Key Laboratory of Polymer Physics and Chemistry,Changchun Institute of Applied Chemistry,Chinese Academy of Sciencesthe Natural Science Foundation of Ningbo Municipal(2019A610030,2019A610129)K.C.Wong Magna Fund in Ningbo University。
文摘Amine elimination of Ln[N(SiMe3)2]3(μ-Cl)Li(THF)3 with aminophenol H[ON]{H[ON]=2-(CH2 NC5 H10)-4,6-tBu2-C6 H3OH}in 1:2 molar ratio in THF gave the monometallic rare-earth metal amide complexes[ON]2 LnN(SiMe3)2(Ln=Yb(1),Y(2),Gd(3),Sm(4),Nd(5))in 57%-73%isolated yields.All these complexes were characterized by elemental analysis.The molecular structures of complexes 1-4 were determined by single crystal X-ray diffraction.These complexes are highly active for L-Iactide polymerization to give high molecular weight polymers with unimodal molecular weight distributions.In addition,these complexes can also initiate rac-lactide polymerization with high activity to afford heterotactic-rich polylactides.
基金financially supported by the National Key Research and Development Program of China (Nos. 2017YFB0309301 and 2017YFB0309302)the Natural Science Foundation of Shanghai, China (No. 17ZR1407200)
文摘Novel bio-based and biodegradable block copolymers were synthesized by "click" reaction between poly(L-lactide)(PLLA) and polyamide 4(PA4). Upon tuning the molar mass of PLLA block, the properties of copolymers and electrospun ultrafine fibers were investigated and compared with those of PLLA and PA4 blends. PLLA and PA4 were found incompatible and formed individual crystalline regions, along with reciprocal inhibition in crystallization. Electrospun fibers were highly hydrophobic, even if hydrophilic PA4 was the rich component. The crystallinity of either PLLA or PA4 decreased after electrospinning and PLLA-rich as-spun fibers were almost amorphous. Immersion tests proved that fibers of block copolymers were relatively homogeneous with micro-phase separation between PLLA and PA4. The fibrous structures of copolymers were different from those of the fibers electrospun from blends, for which sheath-core structure induced by macro-phase separation between homopolymers of PLLA and PA4 was confirmed by TEM, EDS, and XPS.
基金support by the National Natural Science Foundation of China (No. 21901249)Taishan Scholars Program of Shandong Province (No. tsqn201812112)the Scientific Research and Innovation Fund Project of Shandong Energy Research Institute (No. SEI I202004)。
文摘Chemical upcycling of end-of-life poly(lactide) plastics to lactide,lactate ester and new poly(lactide)has been achieved by using magnesium bis[bis(trimethylsilyl)amide][Mg(HMDS)_(2)]as promoter.Mg(HMDS)2 showed high efficiency in L-lactide polymerization and poly(lactide) depolymerization.Mg(HMDS)_(2)/Ph_(2) CHOH catalytic system displayed high ring-opening selectivity and the characteristic of immortal polymerization.Taking advantage of transesterification,depolymerizations of end-oflife poly(lactide) plastics to lactate ester (polymer to value-added chemicals) and lactide (polymer to monomer) were achieved with high yields.Besides,a new“depolymerization-repolymerization”strategy was proposed to directly transform poly(lactide) into new poly(lactide).This work provides a theoretical basis for the design of polymerization and depolymerization catalysts and promotes the development of degradable polymers.
基金financially supported by the National Natural Science Foundation of China (Nos. 21574124 and 51503203)
文摘Schiff-base metal complexes as efficient catalysts are widely used in ring-opening polymerization of cycle esters. The salen Fe complexes were formed with their excellent biocompatibility and less toxicity. A series of salen Fe complexes were designed in this work in order to study the activity and control of polymerization of lactide. The salen Fe complexes＇ activities changed with the ligands configuration and substituent groups.
基金Supported by the National Natural Science Foundation of China(51403160)the Opening Project of Hubei Key Laboratory Biomass Fibers and Eco-dyeing&Finishing(STRZ2017009)
文摘The effects of the plasticizer poly(ethylene glycol)(PEG)on crystallization properties of equimolar poly(L-lactide)(PLLA)/poly(D-lactide)(PDLA)blends were investigated.Forma-tion of the stereocomplex-type poly(lactide acid)(sc-PLA)crystallites was confirmed by Wide-angle X-ray diffraction(WAXD)and differential scanning calorimetry(DSC)analyses.Sc-PLA crystallites without any homochiral poly(lactide acid)(hc-PLA)formed,as the result of the incorporation of the plasticizer PEG(more than or equal to 10%(wt))at a processing temperature(240℃).More-over,when the Mw of PEG reached 1000 g·mol^(-1),the crystal-lizability of stereocomplex crystallites was the best.Isothermal crystallization kinetics further revealed that PEG could accelerate the crystallization rate of sc-PLA,with the optimum crystallization kinetic parameters being obtained at 10%(wt)PEG.Several crys-tallization kinetics equations were applied to describe the effect of PEG on the crystallization behavior of sc-PLA.The influence of PEG on the spherocrystal morphologies of sc-PLA was also inves-tigated using polarized optical microscopy.
基金financially supported by the National Natural Science Foundation of China(No.51403210)China Postdoctoral Science Foundation(No.2014M550801)President Fund of University of Chinese Academy of Sciences(No.Y35102CN00)
文摘Polyester-based biodegradable polyurethane （PU） with different hard segment ratios was selected to modify the impact toughness of poly（L-lactide） （PLLA）. The influence of blending composition and hard segment ratio of PU on the phase morphology, crystallization behavior and mechanical properties of PLLA/PU blends has been investigated systematically. The results showed that the PU particles were uniformly dispersed in PLLA matrix at a scale from sub- microns to several microns. The glass transition temperature of PU within these blends decreased compared to that of neat PU, but rose slightly with its content and hard segment ratio. The presence of PU retarded the crystallization ability of PLLA, whereas enhanced its elongation at break and impact resistance effectively. As the PU content reaches up to 30 wt%, the phenomenon of brittle-ductile transition occurred, resulting in a rougher fracture surface with the formation of fibril-like structure. Moreover, under the same concentrations, the elongation at break and impact strength of PLLA blends decreased slightly with the increase of hard segment ratio of PU.
基金Funded by the Key Project of the Ministry of Science and Technology (No. 96 - 920 - 20 - 21)
文摘The ring-opening polymerization of D, L-lactide in the melt was systematically investigated by using stannous octoate as the initiator. The molecular weight of poly (D, L-lactide) was characterized with M,. Mn and Mw respectively. The results indicated that five variables, namely purity of monomer, initiator to monomer ratio, vacuum level, polymerization temperature and polymerization time had different influences on the molecular weight and molecular weight distribution of poly(D. L-lactide).
基金supported by the National Natural Science Foundations of China(Nos.50833006,20634050 and 50973008)the 47~(th) postdoctoral granted financial support from China Postdoctoral Science Foundation (No.20100470191)
文摘The crystalline structure and morphology of the PLA crystallized isothermally from the glassy state on highly oriented PE substrates at 130℃ were investigated by means of optical microscopy, AFM and X-ray diffraction. The results indicate that the PE substrate influences the crystallization behavior of PLA remarkably, which leads to the growth of PLA crystals on PE substrate always in edge-on form rather than the twisted lamellar crystals from edge-on to flat-on when crystallizing the PLA on glass surface under the same condition. The edge-on PLA lamellae on the PE substrate are preferentially arranged with their long axes in the chain direction of the PE substrate crystals. It is further demonstrated that except for the different crystal orientation, the PE does not influence the crystalline modification and crystallinity of the PLA.
基金Project(50174059) supported by the National Natural Science Foundation of China
文摘Poly(D,L-lactide) was synthesized by indirect method from D,L-lactic acid and characterized by infrared spectrum and proton nuclear magnetic resonance. The influences of monomer purity, initiator concentration, polymerization temperature and polymerization time on the relative molecular mass of poly(D, L-lactide) were investigated. The polylactide was made into porous materials by using solvent-casting particulate-leaching method. Under the optimized conditions, polylactides with a viscosity average molecular mass up to 1.82×105 are obtained and the results are fairly reproducible. Scanning electron microscope observation indicates that the sample is highly porous and well-distributed with good interconnections between pores and the pore size of porous materials is in the range from 200 μm to 500 μm and it can be used as scaffold for bone tissue engineering.
文摘A novel biodegradable polymer--poly （ethene maleic acid ester-co-D,L-lactide acid） was synthesized by copolymerizing lactide and prepolymer, which was prepared by the condensation of maleic anhydride and glycol, using p-toluene sulphonic acid as a catalyst, attempting to improve the hydrophilicity, increase flexibility and modulate the degradation rate. FTIR,^1H NMR, MALLS and DSC were employed to characterize these polymers.
基金supported by the National Natural Science Foundation of China(Nos.50573011 and 50673019)Southeast University Foundation(Nos.9207040015 and 4022001023)
文摘Antibacterial poly（D,L-lactide） （PDLLA） fibrous membranes were developed via electrospinning, followed by surface modification which involved plasma pretreatment, UV-induced graft copolymerization of 4-vinylpyridine （4VP） and quaternization of the grafted pyridine groups with hexylbromide. The success of modification with quaternized pyridinium groups on the PDLLA fibrous membranes was ascertained by X-ray photoelectron spectroscopy （XPS）. The antibacterial activities of these membranes were assessed against Gram-positive Staphylococcus aureus （S. aureus） and Gram-negative Escherichia coli （E. coli）. The PDLLA fibrous membranes modified with quatemized pyridinium groups showed antibacterial efficiency against both bacteria as high as 99.999%. The results demonstrated that the antibacterial activity was based on the interaction of the positive charge of pyridinium group and negatively charged cell membrane of bacteria, resulting in loss of membrane permeability and cell leakage.
基金supported by the National Natural Science Foundation of China(No.50527301)
文摘The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide-angle X-ray diffraction （WAXD）. The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity. Under quiescent conditions, the morphology assumes different sized spherulites, and its crystallinity dramatically reduces with increasing the cooling rate. On the other hand, the shear flow increases the onset crystallization temperature, and enhances the final crystallinity. When the shear rate is above 5 s^-1, cylindrite-like crystals are observed, furthermore, their content depends on the cooling rate.
基金financially supported by the National Natural Science Foundation of China(Nos.51120135002,51203104)the Doctoral Program of the Ministry of Education of China(No.20120181120101)+1 种基金the Program of Introducing Talents of Discipline to Universities(B13040)the Innovation Team Program of Science&Technology Department of Sichuan Province(No.2013TD0013)
文摘In the present work, the PLLA mesophase formation and its kinetics at the advent of a chain mobility accelerator （polyethylene glycol （PEG）） are investigated by wide angle X-ray diffraction （WAXD） and time-resolved Fourier transform infrared spectroscopy （FTIR）. It is interestingly found that the presence of PEG could accelerate the formation of PLLA mesophase notably due to the enhanced chain mobility, giving rise to a substantially reduced half time （t0.5） of PLLA mesophase formation from 129 min to 8 min. The Avrami exponents （n） for the kinetics of mesophase formation are -0.5 for neat PLLA and 1 for PLLA/PEG, respectively, indicating that 1D-rod growth through heterogeneous nucleation occurs during formation of PLLA mesophase. Tensile testing demonstrates that PLLA mesophase could increase the tensile strength and modulus but decrease the elongation at break.
