The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）...The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）. RAMS and FLUENT are combined as a multi-scale numerical modeling system, in which the RAMS simulated data are delivered to the computational model for FLUENT simulation in an offline way. Numerical simulations are performed to present and preliminarily validate the capability of the multi-scale modeling system, and the results show that the modeling system can reasonably provide information on the meteorological elements in an urban area from the urban scale to the city-block scale, especially the details of the turbulent flows within the USL.展开更多
Testing centrifugal fan flow field by physical laboratory is difficult because the testing system is complex and the workload is heavy, and the results observed by naked-eye deviates far from the actual value. To addr...Testing centrifugal fan flow field by physical laboratory is difficult because the testing system is complex and the workload is heavy, and the results observed by naked-eye deviates far from the actual value. To address this problem, the computational fluid dynamics software FLUENT was applied to establish three-dimensional model of the centrifugal fan. The numeral model was verified by comparing simulation data to experimental data. The pressure centrifugal fan and the speed changes in distribution in centrifugal fan was simulated by computational fluid dynamics soft-ware FLUENT. The simulation results show that the gas flow velocity in the impeller increases with impeller radius increase. Static pressure gradually increases when gas from the fan access is imported through fan impeller leaving fans.展开更多
The state-of-art Computational Fluid Dynamics （CFD） codes FLUENT is applied in a fine-scale simulation of the wind field over a complex terrain. Several numerical tests are performed to validate the capability of FL...The state-of-art Computational Fluid Dynamics （CFD） codes FLUENT is applied in a fine-scale simulation of the wind field over a complex terrain. Several numerical tests are performed to validate the capability of FLUENT on describing the wind field details over a complex terrain. The results of the numerical tests show that FLUENT can simulate the wind field over extremely complex terrain, which cannot be simulated by mesoscale models. The reason why FLUENT can cope with extremely complex terrain, which can not be coped with by mesoscale models, relies on some particular techniques adopted by FLUENT, such as computer-aided design （CAD） technique, unstructured grid technique and finite volume method. Compared with mesoscale models, FLUENT can describe terrain in much more accurate details and can provide wind simulation results with higher resolution and more accuracy.展开更多
A new numerical approach is presented, which is used to simulate the dynamic process of metal transfer. The process of metal transfer in gas metal arc welding is simulated based on FLUENT. A two-dimensional axisymmetr...A new numerical approach is presented, which is used to simulate the dynamic process of metal transfer. The process of metal transfer in gas metal arc welding is simulated based on FLUENT. A two-dimensional axisymmetric numerical model is developed using volume of fluid method and the distributions of physical quantities including pressure, current density, electric potential in the droplet are investigated. For improving the veracity of the simulated results and decreasing the effect of the uncertain surface tension coefficient on the simulated results, the relationship between the welding current and surface tension coefficient is modified by analysis of regression. Meanwhile for testing the accuracy of simulated results, the welding experiments are performed and the high-speed photography system is used to record the real process of metal transfer. The results show that the simulated results are in reasonably good agreement with the experimental ones.展开更多
In this paper,based on Fluent software,a five-nozzle gasifier reactor was established to simulate the gasification process of oil-based drill cuttings coal-water slurry.The influence of concentration and oxygen/carbon...In this paper,based on Fluent software,a five-nozzle gasifier reactor was established to simulate the gasification process of oil-based drill cuttings coal-water slurry.The influence of concentration and oxygen/carbon atomic ratio on the gasification process of oil-based drill cuttings coal-water slurry was investigated.The results show that when the oxygen flow is constant,the outlet temperature of gasifier decreases,the content of effective gas increases,and the carbon conversion rate decreases with the increase of concentration;When the ratio of oxygen to carbon atoms is constant,the effective gas content rises and the temperature rises with the increase of the concentration,and the carbon conversion rate reaches the maximum value when the concentration of oil-based drill cuttings coal-water slurry is 65%;When the concentration is constant,the effective gas content decreases and the outlet temperature rises with the increase of the oxygen/carbon atom ratio,and the carbon conversion rate reaches 99.80%when the oxygen/carbon atom ratio is 1.03.It shows that this method can effectively decompose the organic matter in oilbased drill cuttings and realize the efficient and cooperative treatment of oil-based drill cuttings.展开更多
To analyse a possible way to improve the propulsion performance of ships,the unstructured grid and the Reynolds Average Navier-Stokes equations were used to calculate the performance of a propeller and rudder fitted w...To analyse a possible way to improve the propulsion performance of ships,the unstructured grid and the Reynolds Average Navier-Stokes equations were used to calculate the performance of a propeller and rudder fitted with additional thrust fins in the viscous flow field.The computational fluid dynamics software FLUENT was used to simulate the thrust and torque coefficient as a function of the advance coefficient of propeller and the thrust efficiency of additional thrust fins. The pressure and velocity flow behind the propeller was calculated. The geometrical nodes of the propeller were constituted by FORTRAN program and the NUMBS method was used to create a configuration of the propeller,which was then used by GAMMBIT to generate the calculation model. The thrust efficiency of fins was calculated as a function of the number of additional fins and the attack angles. The results of the calculations agree fairly well with experimental data,which shows that the viscous flow solution we present is useful in simulating the performance of propellers and rudders with additional fins.展开更多
Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recover...Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recovery ventilator and to investigate the effect of the air supply arrangement. Three types of mixing ventilation are chosen for the analysis of coupling ANSYS/FLUENT （a computational fluid dynamics （CFD） program） with TRNSYS （a building energy simulation （BES） software）. The adoption of mutual complementary boundary conditions for CFD and BES provides more accurate and complete information of indoor air distribution and thermal performance in buildings. A typical office-space situated in a middle storey is chosen for the analysis. The office-space is equipped with air-conditioners on the ceiling. A heat recovery ventilation system directly supplies flesh air to the office space. Its thermal performance and indoor air distribution predicted by the coupled method are compared under three types of ventilation system. When the supply and return openings for ventilation are arranged on the ceiling, there is no critical difference between the predictions of the coupled method and BES on the energy consumption of HVAC because PID control is adopted for the supply air temperature of the occupied zone. On the other hand, approximately 21% discrepancy for the heat recovery estimation in the maximum between the simulated results of coupled method and BES-only can be obviously found in the floor air supply ventilation case. The discrepancy emphasizes the necessity of coupling CFD with BES when vertical air temperature gradient exists. Our future target is to estimate the optimum design of heat recovery ventilation system to control CO2 concentration by adjusting flow rate of flesh air.展开更多
In this paper,we take the mid-temperature gravity heat pipe exchanger as the research object,simulate the fluid flow field,temperature field and the working state of heat pipe in the heat exchanger by Fluent software....In this paper,we take the mid-temperature gravity heat pipe exchanger as the research object,simulate the fluid flow field,temperature field and the working state of heat pipe in the heat exchanger by Fluent software.The effects of different operating parameters and fin parameters on the heat transfer performance of heat exchangers are studied.The results show that the heat transfer performance of the mid-temperature gravity heat pipe exchanger is the best when the fin spacing is between 5 mm and 6 mm,the height of the heat pipe is between 12 mm and 13 mm,and the inlet velocity of the fluid is between 2.5 m/s to 3 m/s.展开更多
As industrialization accelerates and the amount of hazardous waste generated gradually increases,the means of disposal of hazardous waste is of increasing concern.In this paper,a 40 t/d counter-fow rotary kiln inciner...As industrialization accelerates and the amount of hazardous waste generated gradually increases,the means of disposal of hazardous waste is of increasing concern.In this paper,a 40 t/d counter-fow rotary kiln incineration system owned by a Jiangsu environmental protection company was researched.The software Aspen Plus was used to build the mixed pyrolysis model and the software Fluent was used to build the computational fuid dynamics model of the incineration system.The infuence of the calorifc value of the hazardous waste,the operating temperature and the air supply on the operational efectiveness of the incineration system were analyzed by varying the simulation conditions.The results show that the SO_(x)and NO_(x)content of the product is lower when the operating temperature is above 800℃.The incineration system could only operate above 800℃when the calorifc value of the hazardous waste is not less than 1500 kcal/kg.The incineration system operated best at a primary air velocity of 1.5 m/s.The simulation results in this paper serve as a guide for the operation of counter-fow rotary kiln incineration systems.展开更多
In this paper numerical simulation of PRHR HX and IRWST is demonstrated using FLUENT, and different numbers of C-type heat transfer tubes and coolant inlet temperature’s effects for the residual heat removal capacity...In this paper numerical simulation of PRHR HX and IRWST is demonstrated using FLUENT, and different numbers of C-type heat transfer tubes and coolant inlet temperature’s effects for the residual heat removal capacity of PRHR HX, IRWST thermal stratification and natural circulation have been researched. It’s found that at a constant flow area when heat transfer tubes’ number increased outlet temperature of PRHR HX is lower, the whole water temperature of IRWST is higher, thermal stratification and natural circulation are more oblivious. At a constant mass flow when inlet temperature of PRHR HX increased, inlet flow velocity increases and outlet temperature is higher. But on the other hand the cooling rate increases at the same time, the average temperature of IRWST is higher, the range of thermal stratification expands and the velocity of natural circulation increases.展开更多
The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is ...The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.展开更多
The high temperature air combustion(HiTAC) process in gas suspension calcinations(GSC) was studied by using a CFD software FLUENT that can simulate the three-dimensional physical model of GSC with the k-epsilon turbul...The high temperature air combustion(HiTAC) process in gas suspension calcinations(GSC) was studied by using a CFD software FLUENT that can simulate the three-dimensional physical model of GSC with the k-epsilon turbulent viscous model, PDF non-premixed combustion species model, P1 radiation model, thermal and prompt NO pollution model. The simulation vividly describes the distributions of the temperature, velocity and consistency fields. Finally, the optimal operation conditions and igniter configuration of particular fuel combustion are obtained by analyzing and comparing the simulation results. And the emission quantity of NOx, CO and CO2 deduced from computation can play a role as reference. These optimal and estimated values are beneficial to practical operation.展开更多
基金This study was supported by the National Natural Science Foundation of China （Grant Nos. 40233030, 40405004, 40405014）.
文摘The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）. RAMS and FLUENT are combined as a multi-scale numerical modeling system, in which the RAMS simulated data are delivered to the computational model for FLUENT simulation in an offline way. Numerical simulations are performed to present and preliminarily validate the capability of the multi-scale modeling system, and the results show that the modeling system can reasonably provide information on the meteorological elements in an urban area from the urban scale to the city-block scale, especially the details of the turbulent flows within the USL.
文摘Testing centrifugal fan flow field by physical laboratory is difficult because the testing system is complex and the workload is heavy, and the results observed by naked-eye deviates far from the actual value. To address this problem, the computational fluid dynamics software FLUENT was applied to establish three-dimensional model of the centrifugal fan. The numeral model was verified by comparing simulation data to experimental data. The pressure centrifugal fan and the speed changes in distribution in centrifugal fan was simulated by computational fluid dynamics soft-ware FLUENT. The simulation results show that the gas flow velocity in the impeller increases with impeller radius increase. Static pressure gradually increases when gas from the fan access is imported through fan impeller leaving fans.
基金supported by the National Natural Science Foundation of China(40805004, 40705039 and 90715031)the "Mini-projecton detailed survey and evaluation of wind energy resources"supported by National Climate Center of Chinese Meteoro-logical Administration (CWERA2010002)
文摘The state-of-art Computational Fluid Dynamics （CFD） codes FLUENT is applied in a fine-scale simulation of the wind field over a complex terrain. Several numerical tests are performed to validate the capability of FLUENT on describing the wind field details over a complex terrain. The results of the numerical tests show that FLUENT can simulate the wind field over extremely complex terrain, which cannot be simulated by mesoscale models. The reason why FLUENT can cope with extremely complex terrain, which can not be coped with by mesoscale models, relies on some particular techniques adopted by FLUENT, such as computer-aided design （CAD） technique, unstructured grid technique and finite volume method. Compared with mesoscale models, FLUENT can describe terrain in much more accurate details and can provide wind simulation results with higher resolution and more accuracy.
基金financially supported by the National Natural Science Foundation of China (No. 51175374)the Natural Science Foundation of Tianjin (No. 11JCY-BJC06100)the State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology (No. AWPT-M12-08)
文摘A new numerical approach is presented, which is used to simulate the dynamic process of metal transfer. The process of metal transfer in gas metal arc welding is simulated based on FLUENT. A two-dimensional axisymmetric numerical model is developed using volume of fluid method and the distributions of physical quantities including pressure, current density, electric potential in the droplet are investigated. For improving the veracity of the simulated results and decreasing the effect of the uncertain surface tension coefficient on the simulated results, the relationship between the welding current and surface tension coefficient is modified by analysis of regression. Meanwhile for testing the accuracy of simulated results, the welding experiments are performed and the high-speed photography system is used to record the real process of metal transfer. The results show that the simulated results are in reasonably good agreement with the experimental ones.
基金This research was funded by the Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(KYCX21_2815).
文摘In this paper,based on Fluent software,a five-nozzle gasifier reactor was established to simulate the gasification process of oil-based drill cuttings coal-water slurry.The influence of concentration and oxygen/carbon atomic ratio on the gasification process of oil-based drill cuttings coal-water slurry was investigated.The results show that when the oxygen flow is constant,the outlet temperature of gasifier decreases,the content of effective gas increases,and the carbon conversion rate decreases with the increase of concentration;When the ratio of oxygen to carbon atoms is constant,the effective gas content rises and the temperature rises with the increase of the concentration,and the carbon conversion rate reaches the maximum value when the concentration of oil-based drill cuttings coal-water slurry is 65%;When the concentration is constant,the effective gas content decreases and the outlet temperature rises with the increase of the oxygen/carbon atom ratio,and the carbon conversion rate reaches 99.80%when the oxygen/carbon atom ratio is 1.03.It shows that this method can effectively decompose the organic matter in oilbased drill cuttings and realize the efficient and cooperative treatment of oil-based drill cuttings.
文摘To analyse a possible way to improve the propulsion performance of ships,the unstructured grid and the Reynolds Average Navier-Stokes equations were used to calculate the performance of a propeller and rudder fitted with additional thrust fins in the viscous flow field.The computational fluid dynamics software FLUENT was used to simulate the thrust and torque coefficient as a function of the advance coefficient of propeller and the thrust efficiency of additional thrust fins. The pressure and velocity flow behind the propeller was calculated. The geometrical nodes of the propeller were constituted by FORTRAN program and the NUMBS method was used to create a configuration of the propeller,which was then used by GAMMBIT to generate the calculation model. The thrust efficiency of fins was calculated as a function of the number of additional fins and the attack angles. The results of the calculations agree fairly well with experimental data,which shows that the viscous flow solution we present is useful in simulating the performance of propellers and rudders with additional fins.
基金Project supported by Grant-in-Aid for Scientific Research (JSPS KAKENHI for Young Scientists (S), 21676005)
文摘Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recovery ventilator and to investigate the effect of the air supply arrangement. Three types of mixing ventilation are chosen for the analysis of coupling ANSYS/FLUENT （a computational fluid dynamics （CFD） program） with TRNSYS （a building energy simulation （BES） software）. The adoption of mutual complementary boundary conditions for CFD and BES provides more accurate and complete information of indoor air distribution and thermal performance in buildings. A typical office-space situated in a middle storey is chosen for the analysis. The office-space is equipped with air-conditioners on the ceiling. A heat recovery ventilation system directly supplies flesh air to the office space. Its thermal performance and indoor air distribution predicted by the coupled method are compared under three types of ventilation system. When the supply and return openings for ventilation are arranged on the ceiling, there is no critical difference between the predictions of the coupled method and BES on the energy consumption of HVAC because PID control is adopted for the supply air temperature of the occupied zone. On the other hand, approximately 21% discrepancy for the heat recovery estimation in the maximum between the simulated results of coupled method and BES-only can be obviously found in the floor air supply ventilation case. The discrepancy emphasizes the necessity of coupling CFD with BES when vertical air temperature gradient exists. Our future target is to estimate the optimum design of heat recovery ventilation system to control CO2 concentration by adjusting flow rate of flesh air.
文摘In this paper,we take the mid-temperature gravity heat pipe exchanger as the research object,simulate the fluid flow field,temperature field and the working state of heat pipe in the heat exchanger by Fluent software.The effects of different operating parameters and fin parameters on the heat transfer performance of heat exchangers are studied.The results show that the heat transfer performance of the mid-temperature gravity heat pipe exchanger is the best when the fin spacing is between 5 mm and 6 mm,the height of the heat pipe is between 12 mm and 13 mm,and the inlet velocity of the fluid is between 2.5 m/s to 3 m/s.
基金supported by the National Key R&D Program of China(No.2018YFC1902600)。
文摘As industrialization accelerates and the amount of hazardous waste generated gradually increases,the means of disposal of hazardous waste is of increasing concern.In this paper,a 40 t/d counter-fow rotary kiln incineration system owned by a Jiangsu environmental protection company was researched.The software Aspen Plus was used to build the mixed pyrolysis model and the software Fluent was used to build the computational fuid dynamics model of the incineration system.The infuence of the calorifc value of the hazardous waste,the operating temperature and the air supply on the operational efectiveness of the incineration system were analyzed by varying the simulation conditions.The results show that the SO_(x)and NO_(x)content of the product is lower when the operating temperature is above 800℃.The incineration system could only operate above 800℃when the calorifc value of the hazardous waste is not less than 1500 kcal/kg.The incineration system operated best at a primary air velocity of 1.5 m/s.The simulation results in this paper serve as a guide for the operation of counter-fow rotary kiln incineration systems.
文摘In this paper numerical simulation of PRHR HX and IRWST is demonstrated using FLUENT, and different numbers of C-type heat transfer tubes and coolant inlet temperature’s effects for the residual heat removal capacity of PRHR HX, IRWST thermal stratification and natural circulation have been researched. It’s found that at a constant flow area when heat transfer tubes’ number increased outlet temperature of PRHR HX is lower, the whole water temperature of IRWST is higher, thermal stratification and natural circulation are more oblivious. At a constant mass flow when inlet temperature of PRHR HX increased, inlet flow velocity increases and outlet temperature is higher. But on the other hand the cooling rate increases at the same time, the average temperature of IRWST is higher, the range of thermal stratification expands and the velocity of natural circulation increases.
基金support from the National Key Research and Development Program of China(No.2018YFD0900704)the National Natural Science Foundation of China(No.31972796).
文摘The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.
基金Project (60634020) supported by the National Natural Science Foundation of China
文摘The high temperature air combustion(HiTAC) process in gas suspension calcinations(GSC) was studied by using a CFD software FLUENT that can simulate the three-dimensional physical model of GSC with the k-epsilon turbulent viscous model, PDF non-premixed combustion species model, P1 radiation model, thermal and prompt NO pollution model. The simulation vividly describes the distributions of the temperature, velocity and consistency fields. Finally, the optimal operation conditions and igniter configuration of particular fuel combustion are obtained by analyzing and comparing the simulation results. And the emission quantity of NOx, CO and CO2 deduced from computation can play a role as reference. These optimal and estimated values are beneficial to practical operation.
