The drop structure will fail as a result of local scoring downstream.This paper discusses the influence of a drop structures' upstream slope to local scour.Empirical equations of the scour hole were developed by l...The drop structure will fail as a result of local scoring downstream.This paper discusses the influence of a drop structures' upstream slope to local scour.Empirical equations of the scour hole were developed by laboratory experiment,theoretical assumptions,and regression analysis.These equations include the maximum scour depth and length during the scouring period,the maximum equilibrium scour depth and length,and the unit width scour rate.The four channel slopes(0%,2%,4%,and 6%) before the drop structure has been included in the analysis.A series of laboratory experiments were conducted to obtain 48 groups of experiments and 419 scour hole profiles during the scouring period.The material used in the scour section is uniform non-cohesive and with a median diameter of d50 = 0.5 mm.The results have been used to develop empirical equations via regression analysis to determine the coefficients of theoretical equations.The high correlation coefficient indicates that the equations developed in this study are suitable for verifying the characteristics of a scour hole at drop structure in the sloped channel.The semi-empirical equation is more accurate than the empirical equation.Compared to a horizontal channel,a sloped channel tends to cause a greater equilibriummaximum scour length,shorter equilibrium maximum scour depth,and faster unit-wide scour rate.展开更多
Soot nanoparticles produced during combustion exhibit diverse nanostructures,which are affected by different combustion parameters such as flame stoichiometry and temperature.This work focuses on characterizing RP-3 j...Soot nanoparticles produced during combustion exhibit diverse nanostructures,which are affected by different combustion parameters such as flame stoichiometry and temperature.This work focuses on characterizing RP-3 jet flame properties and exploring the intricate relationship between the effect of temperature and carbon formation.The observed flame length displayed a notable increase in proportion to the equivalence ratio's growth.The flame color underwent a great transformation,evolving from pale blue in fuel-lean conditions to bright green at stoichiometric levels,and to brilliant yellow under fuel-rich conditions.Through systematic sampling and thorough observation of soot morphology at different flame heights,there is a clear correlation between the height of the flame and the acceleration of carbon agglomerate growth.Furthermore,an insightful observation is presented wherein the rise in flame height leads to a gradual reduction in the contribution of surface growth to the overall soot particle size.These findings contribute significantly to the understanding of the complex interplay between combustion conditions and soot nanostructures.The trends in flame characteristics,coupled with insights into soot morphology,provide a foundation for comprehending the underlying mechanisms governing soot formation in RP-3 flames.These results contribute to the understanding of combustion dynamics,offering valuable perspectives for optimizing combustion processes and elucidating the environmental implications of flame-formed soot.展开更多
A solid sustained-release energetic material sample,an eruption device and a complete test system were prepared further to analyse the combustion characteristics of solid sustainedrelease energetic materials.The high-...A solid sustained-release energetic material sample,an eruption device and a complete test system were prepared further to analyse the combustion characteristics of solid sustainedrelease energetic materials.The high-temperature heat flux generated by the combustion of the samples from the eruption device was used to penetrate the Q235 target plate.In addition,the meaning and calculation formula of energy density characterising the all-around performance of heat flux were proposed.The numerical simulation of the combustion effect of samples was carried out.According to the data comparison,the numerical simulation results agreed with the experimental results,and the maximum deviation between the two was less than 8.9%.In addition,the structure of the combustion wave and high-temperature jet was proposed and analysed.Based on theoretical analysis,experimental research and numerical simulation,the theoretical burning rate formula of the sample was established.The maximum error between the theoretically calculated mass burning rate and the experimental results was less than 9.8%.Therefore,using the gas-phase steady-state combustion model to study the combustion characteristics of solid sustained-release energetic materials was reasonable.The theoretical burning rate formula also had high accuracy.Therefore,the model could provide scientific and academic guidance for the theoretical research,system design and practical application of solid sustained-release energetic materials in related fields.展开更多
Based on best-track data and JRA-25 reanalysis,a climatology of western North Pacific extratropical transition (ET) of tropical cyclone (TC) is presented in this paper. It was found that 35% (318 out of 912) of all TC...Based on best-track data and JRA-25 reanalysis,a climatology of western North Pacific extratropical transition (ET) of tropical cyclone (TC) is presented in this paper. It was found that 35% (318 out of 912) of all TCs underwent ET during 1979-2008. The warm-season (June through September) ETs account for 64% of all ET events with the most occurrence in September. The area 120°E-150°E and 20°N-40°N is the most favorable region for ET onsets in western North Pacific. The TCs experiencing ET at latitudes 30°N-40°N have the greatest intensity in contrast to those at other latitude bands. The distribution of ET onset locations shows obviously meridional migration in different seasons. A cyclone phase space (CPS) method was used to analyze the TC evolution during ET. Except for some cases of abnormal ET at relatively high latitudes,typical phase evolution paths-along which TC firstly showed thermal asymmetry and an upper-level cold core and then lost its low-level warm core-can be used to describe the main features of ET processes in western North Pacific. Some seasonal variations of ET evolution paths in CPS were also found at low latitudes south of 15°N,which suggests different ET onset mechanisms there. Further composite analysis concluded that warm-season ETs have generally two types of evolutions,but only one type in cold season (October through next May). The first type of warm-season ETs has less baroclinicity due to long distance between the TC and upper-level mid-latitude system. However,significant interactions between a mid-latitude upper-level trough and TC,which either approaches or is absorbed into the trough,and TC's relations with downstream and upstream upper-level jets,are the fingerprints for both a second type of warm-season ETs and almost all the cold-season ETs. For each type of ETs,detailed structural characteristics as well as precipitation distribution are illustrated by latitude.展开更多
γ＋jet events provide a tomographic measurement of the medium formed in heavy ion collisions at LHC energies.Tagging events with a well identified high p T direct photon and measuring the correlation distribution of ...γ＋jet events provide a tomographic measurement of the medium formed in heavy ion collisions at LHC energies.Tagging events with a well identified high p T direct photon and measuring the correlation distribution of hadrons emitted oppositely to the photon in ALICE,allows us to determine,with a good approximation,both the jet fragmentation function and the back-to-back azimuthal alignment of the direct photon and the jet.Comparing these two observables measured in pp collisions with the ones measured in AA collisions will reveal the modifications of the jet structure induced by the medium formed in AA collisions and consequently will infer the medium properties.展开更多
基金the research support from Ministry of Science and Technology of Chinese Taipei,with the project no.104-2313-B-343-001
文摘The drop structure will fail as a result of local scoring downstream.This paper discusses the influence of a drop structures' upstream slope to local scour.Empirical equations of the scour hole were developed by laboratory experiment,theoretical assumptions,and regression analysis.These equations include the maximum scour depth and length during the scouring period,the maximum equilibrium scour depth and length,and the unit width scour rate.The four channel slopes(0%,2%,4%,and 6%) before the drop structure has been included in the analysis.A series of laboratory experiments were conducted to obtain 48 groups of experiments and 419 scour hole profiles during the scouring period.The material used in the scour section is uniform non-cohesive and with a median diameter of d50 = 0.5 mm.The results have been used to develop empirical equations via regression analysis to determine the coefficients of theoretical equations.The high correlation coefficient indicates that the equations developed in this study are suitable for verifying the characteristics of a scour hole at drop structure in the sloped channel.The semi-empirical equation is more accurate than the empirical equation.Compared to a horizontal channel,a sloped channel tends to cause a greater equilibriummaximum scour length,shorter equilibrium maximum scour depth,and faster unit-wide scour rate.
基金financially supported by the National Key R&D Program (2021YFA0716200/ 2022YFB4003900)National Natural Science Foundation of China (No.52325604)the financial support from the ANSO scholarship。
文摘Soot nanoparticles produced during combustion exhibit diverse nanostructures,which are affected by different combustion parameters such as flame stoichiometry and temperature.This work focuses on characterizing RP-3 jet flame properties and exploring the intricate relationship between the effect of temperature and carbon formation.The observed flame length displayed a notable increase in proportion to the equivalence ratio's growth.The flame color underwent a great transformation,evolving from pale blue in fuel-lean conditions to bright green at stoichiometric levels,and to brilliant yellow under fuel-rich conditions.Through systematic sampling and thorough observation of soot morphology at different flame heights,there is a clear correlation between the height of the flame and the acceleration of carbon agglomerate growth.Furthermore,an insightful observation is presented wherein the rise in flame height leads to a gradual reduction in the contribution of surface growth to the overall soot particle size.These findings contribute significantly to the understanding of the complex interplay between combustion conditions and soot nanostructures.The trends in flame characteristics,coupled with insights into soot morphology,provide a foundation for comprehending the underlying mechanisms governing soot formation in RP-3 flames.These results contribute to the understanding of combustion dynamics,offering valuable perspectives for optimizing combustion processes and elucidating the environmental implications of flame-formed soot.
文摘A solid sustained-release energetic material sample,an eruption device and a complete test system were prepared further to analyse the combustion characteristics of solid sustainedrelease energetic materials.The high-temperature heat flux generated by the combustion of the samples from the eruption device was used to penetrate the Q235 target plate.In addition,the meaning and calculation formula of energy density characterising the all-around performance of heat flux were proposed.The numerical simulation of the combustion effect of samples was carried out.According to the data comparison,the numerical simulation results agreed with the experimental results,and the maximum deviation between the two was less than 8.9%.In addition,the structure of the combustion wave and high-temperature jet was proposed and analysed.Based on theoretical analysis,experimental research and numerical simulation,the theoretical burning rate formula of the sample was established.The maximum error between the theoretically calculated mass burning rate and the experimental results was less than 9.8%.Therefore,using the gas-phase steady-state combustion model to study the combustion characteristics of solid sustained-release energetic materials was reasonable.The theoretical burning rate formula also had high accuracy.Therefore,the model could provide scientific and academic guidance for the theoretical research,system design and practical application of solid sustained-release energetic materials in related fields.
基金National Natural Science Foundation of China (NSFC) General Program (40705016)100 Talents Programme of The Chinese Academy of Sciences (KCL14014)+2 种基金NSFC Key Program (40730948)NSFC General Program (40675029)the Knowledge Innovation Program of the Chinese Academy of Sciences (0766079301)
文摘Based on best-track data and JRA-25 reanalysis,a climatology of western North Pacific extratropical transition (ET) of tropical cyclone (TC) is presented in this paper. It was found that 35% (318 out of 912) of all TCs underwent ET during 1979-2008. The warm-season (June through September) ETs account for 64% of all ET events with the most occurrence in September. The area 120°E-150°E and 20°N-40°N is the most favorable region for ET onsets in western North Pacific. The TCs experiencing ET at latitudes 30°N-40°N have the greatest intensity in contrast to those at other latitude bands. The distribution of ET onset locations shows obviously meridional migration in different seasons. A cyclone phase space (CPS) method was used to analyze the TC evolution during ET. Except for some cases of abnormal ET at relatively high latitudes,typical phase evolution paths-along which TC firstly showed thermal asymmetry and an upper-level cold core and then lost its low-level warm core-can be used to describe the main features of ET processes in western North Pacific. Some seasonal variations of ET evolution paths in CPS were also found at low latitudes south of 15°N,which suggests different ET onset mechanisms there. Further composite analysis concluded that warm-season ETs have generally two types of evolutions,but only one type in cold season (October through next May). The first type of warm-season ETs has less baroclinicity due to long distance between the TC and upper-level mid-latitude system. However,significant interactions between a mid-latitude upper-level trough and TC,which either approaches or is absorbed into the trough,and TC's relations with downstream and upstream upper-level jets,are the fingerprints for both a second type of warm-season ETs and almost all the cold-season ETs. For each type of ETs,detailed structural characteristics as well as precipitation distribution are illustrated by latitude.
基金Supported by NSFC (10875051,10635020)State Key Development Program of(for) Basic Research of China (2008CB317106)+1 种基金Key Project of Chinese Ministry of Education (306022,IRT0624)Programme of Introducing Talents of Discipline to Universitiesnder of China (B08033)
文摘γ＋jet events provide a tomographic measurement of the medium formed in heavy ion collisions at LHC energies.Tagging events with a well identified high p T direct photon and measuring the correlation distribution of hadrons emitted oppositely to the photon in ALICE,allows us to determine,with a good approximation,both the jet fragmentation function and the back-to-back azimuthal alignment of the direct photon and the jet.Comparing these two observables measured in pp collisions with the ones measured in AA collisions will reveal the modifications of the jet structure induced by the medium formed in AA collisions and consequently will infer the medium properties.
