The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables ...The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables of chemical coagulation method were type and amount of chemicals, pH and stirring rate. For electrocoagulation method, the variables were electrode materials, electric potential and contact time. It was found that the optimum condition of chemical coagulation method was 10% （w/w） of aqueous solution of aluminum sulphate 80 mL and 0.01% （w/w） of aqueous solution of coagulant aids, cationic polymer 32 mL per 4 L of wastewater at oH 8. The mixture solution was rapidly stirred with 120 rpm for 1 min and then slowly stirred with 20 rpm for 20 rain. The removal efficiency of turbidity, COD and oil content were 88.88%, 85.20% and 77.72%, respectively. For electrocoagulation method, the optimum condition was using aluminum electrode with 35 V and 150 min of contact time. The removal efficiency of turbidity, COD and oil content were 98.86%, 91.63% and 89.84%, respectively. It can be concluded from this study that the textile industrial wastewater treatment from water jet loom machine with electrocoagulation method is more efficient than that with chemical coagulation method.展开更多
Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising techn...Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.展开更多
Electrochemical jet machining(EJM)encounters significant challenges in the microstructuring of chemically inert and passivating materials because an oxide layer is easily formed on the material surface,preventing the ...Electrochemical jet machining(EJM)encounters significant challenges in the microstructuring of chemically inert and passivating materials because an oxide layer is easily formed on the material surface,preventing the progress of electrochemical dissolution.This research demonstrates for the first time a jet-electrolytic plasma micromachining(Jet-EPM)method to overcome this problem.Specifically,an electrolytic plasma is intentionally induced at the jet-material contact area by applying a potential high enough to surmount the surface boundary layer(such as a passive film or gas bubble)and enable material removal.Compared to traditional EJM,introducing plasma in the electrochemical jet system leads to considerable differences in machining performance due to the inclusion of plasma reactions.In this work,the implementation of Jet-EPM for fabricating microstructures in the semiconductor material 4H-SiC is demonstrated,and the machining principle and characteristics of Jet-EPM,including critical parameters and process windows,are comprehensively investigated.Theoretical modeling and experiments have elucidated the mechanisms of plasma ignition/evolution and the corresponding material removal,showing the strong potential of Jet-EPM for micromachining chemically resistant materials.The present study considerably augments the range of materials available for processing by the electrochemical jet technique.展开更多
In laser milling assisted with jet electrochemical machining(LMAJECM),the source of energy is a pulsed laser beam aligned coaxially with a jet of electrolyte,which focuses optical energy on the surface of workpiece.Th...In laser milling assisted with jet electrochemical machining(LMAJECM),the source of energy is a pulsed laser beam aligned coaxially with a jet of electrolyte,which focuses optical energy on the surface of workpiece.The impact of jet of electrolyte develops a state-of-art work to perform operations such as electrolytic etching,effective cooling,and transportation of debris.Therefore,a special jet cell is designed to obtain stable jet as to be a kind of noncontact tool,i.e.,electrode.According to the theoretical model of on-off pulse time process,laser machining and electrolytic anodization are simulated by finite element analysis(FEA)method.Grooves on a 0.5mm thick 321 stainless steel sheet produced by LMAJECM is performed with pulsed Nd:YAG laser at the second harmonic wavelength.Compared with laser milling under ambient atmosphere conditions,the recast layer and burrs are effectively diminished.And the accuracy of depth is dedicated to laser milling,whilst that of width is dominated by jet electrochemical machining.It is demonstrated that LMAJECM can be a highly potential approach for fabricating 3-D micro components.展开更多
Electrolyte jet machining(EJM)is a promising method for shaping titanium alloys due to its lack of tool wear,thermal and residual stress,and cracks and burrs.Recently,macro-EJM has attracted increasing attention for i...Electrolyte jet machining(EJM)is a promising method for shaping titanium alloys due to its lack of tool wear,thermal and residual stress,and cracks and burrs.Recently,macro-EJM has attracted increasing attention for its high efficiency in machining wide grooves or planes.However,macro-EJM generates large amounts of electrolytic products,thereby increasing the difficulty of rapid product removal with a standard tool and reducing the surface quality.Therefore,for enhanced product transport,a novel tool with a back inclined end face was proposed for macroEJM of TC4 titanium alloy.For comparison,also proposed were ones with a standard flat end face,a front inclined end face,and both front and back inclined end faces.The flow field distributions of all proposed tools were simulated numerically,and experiments were also conducted to validate the simulation results.The results show that one with a 5°back inclined end face can decrease the lowvelocity flow zone in the machining area and increase the high-velocity flow zone at the back end of tool,thereby promoting rapid product removal.A relatively smooth bright-white groove surface was obtained.The same tool also resulted in the highest machining depth and material removal rate among the tested ones.In addition,rapid product removal was beneficial to the subsequent processing.Because of its rapid product removal,the machining depth and material removal rate during deep groove machining using the tool with a 5°back inclined end face were respectively 7%and14%higher than those produced using a standard one.Moreover,the lowest bottom height difference of 0.027 mm can be obtained when the step-over value was 8.2 mm,and a plane with a depth of0.285 mm and a bottom height difference of 0.03 mm was fabricated using the tool with a 5°back inclined end face.展开更多
According to the critical size ratio for the characteristic particle size to film thickness between grinding wheel and work, the machining mechanisms in abrasive jet precision finishing with grinding wheel as restrain...According to the critical size ratio for the characteristic particle size to film thickness between grinding wheel and work, the machining mechanisms in abrasive jet precision finishing with grinding wheel as restraint can be categorized into four states, namely, two-body lapping, three-body polishing, abrasive jet machining and fluid hydrodynamic shear stress machining. The critical transition condition of two-body lapping to three-body polishing was analyzed. The single abrasive material removal models of two-body lapping, three-body polishing, abrasive jet finishing and fluid hydrodynamic shear stress machining were proposed. Experiments were performed in the refited plane grinding machine for theoretical modes verification. It was found that experimental results agreed with academic modes and the modes validity was verified.展开更多
文摘The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables of chemical coagulation method were type and amount of chemicals, pH and stirring rate. For electrocoagulation method, the variables were electrode materials, electric potential and contact time. It was found that the optimum condition of chemical coagulation method was 10% （w/w） of aqueous solution of aluminum sulphate 80 mL and 0.01% （w/w） of aqueous solution of coagulant aids, cationic polymer 32 mL per 4 L of wastewater at oH 8. The mixture solution was rapidly stirred with 120 rpm for 1 min and then slowly stirred with 20 rpm for 20 rain. The removal efficiency of turbidity, COD and oil content were 88.88%, 85.20% and 77.72%, respectively. For electrocoagulation method, the optimum condition was using aluminum electrode with 35 V and 150 min of contact time. The removal efficiency of turbidity, COD and oil content were 98.86%, 91.63% and 89.84%, respectively. It can be concluded from this study that the textile industrial wastewater treatment from water jet loom machine with electrocoagulation method is more efficient than that with chemical coagulation method.
基金the National Natural Science Foundation of China(No.52205468)China Postdoctoral Science Foundation(No.2022M710061 and No.2023T160277)Natural Science Foundation of Jiangsu Province(No.BK20210755)。
文摘Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.
基金supported by the National Key R&D Pro-gram of China(No.2021YFF0501700)the National Nat-ural Science Foundation of China(No.51905255)+1 种基金the Project of Guangdong Provincial Department of Education(No.2019KTSCX152)the Shenzhen Science and Technology Pro-gram(No.GJHZ20200731095204014).
文摘Electrochemical jet machining(EJM)encounters significant challenges in the microstructuring of chemically inert and passivating materials because an oxide layer is easily formed on the material surface,preventing the progress of electrochemical dissolution.This research demonstrates for the first time a jet-electrolytic plasma micromachining(Jet-EPM)method to overcome this problem.Specifically,an electrolytic plasma is intentionally induced at the jet-material contact area by applying a potential high enough to surmount the surface boundary layer(such as a passive film or gas bubble)and enable material removal.Compared to traditional EJM,introducing plasma in the electrochemical jet system leads to considerable differences in machining performance due to the inclusion of plasma reactions.In this work,the implementation of Jet-EPM for fabricating microstructures in the semiconductor material 4H-SiC is demonstrated,and the machining principle and characteristics of Jet-EPM,including critical parameters and process windows,are comprehensively investigated.Theoretical modeling and experiments have elucidated the mechanisms of plasma ignition/evolution and the corresponding material removal,showing the strong potential of Jet-EPM for micromachining chemically resistant materials.The present study considerably augments the range of materials available for processing by the electrochemical jet technique.
基金Supported by the National Natural Science Foundation of China(51205212)the Natural ScienceFoundation of Jiangsu Province(BK2012233)
文摘In laser milling assisted with jet electrochemical machining(LMAJECM),the source of energy is a pulsed laser beam aligned coaxially with a jet of electrolyte,which focuses optical energy on the surface of workpiece.The impact of jet of electrolyte develops a state-of-art work to perform operations such as electrolytic etching,effective cooling,and transportation of debris.Therefore,a special jet cell is designed to obtain stable jet as to be a kind of noncontact tool,i.e.,electrode.According to the theoretical model of on-off pulse time process,laser machining and electrolytic anodization are simulated by finite element analysis(FEA)method.Grooves on a 0.5mm thick 321 stainless steel sheet produced by LMAJECM is performed with pulsed Nd:YAG laser at the second harmonic wavelength.Compared with laser milling under ambient atmosphere conditions,the recast layer and burrs are effectively diminished.And the accuracy of depth is dedicated to laser milling,whilst that of width is dominated by jet electrochemical machining.It is demonstrated that LMAJECM can be a highly potential approach for fabricating 3-D micro components.
基金supported by the National Natural Science Foundation of China(No.91860208)the National Natural Science Foundation of China for Creative Research Groups(No.51921003)。
文摘Electrolyte jet machining(EJM)is a promising method for shaping titanium alloys due to its lack of tool wear,thermal and residual stress,and cracks and burrs.Recently,macro-EJM has attracted increasing attention for its high efficiency in machining wide grooves or planes.However,macro-EJM generates large amounts of electrolytic products,thereby increasing the difficulty of rapid product removal with a standard tool and reducing the surface quality.Therefore,for enhanced product transport,a novel tool with a back inclined end face was proposed for macroEJM of TC4 titanium alloy.For comparison,also proposed were ones with a standard flat end face,a front inclined end face,and both front and back inclined end faces.The flow field distributions of all proposed tools were simulated numerically,and experiments were also conducted to validate the simulation results.The results show that one with a 5°back inclined end face can decrease the lowvelocity flow zone in the machining area and increase the high-velocity flow zone at the back end of tool,thereby promoting rapid product removal.A relatively smooth bright-white groove surface was obtained.The same tool also resulted in the highest machining depth and material removal rate among the tested ones.In addition,rapid product removal was beneficial to the subsequent processing.Because of its rapid product removal,the machining depth and material removal rate during deep groove machining using the tool with a 5°back inclined end face were respectively 7%and14%higher than those produced using a standard one.Moreover,the lowest bottom height difference of 0.027 mm can be obtained when the step-over value was 8.2 mm,and a plane with a depth of0.285 mm and a bottom height difference of 0.03 mm was fabricated using the tool with a 5°back inclined end face.
基金Sponsored by the National Natural Science Foundation of China (Grant No 50475052)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No 20040145001)
文摘According to the critical size ratio for the characteristic particle size to film thickness between grinding wheel and work, the machining mechanisms in abrasive jet precision finishing with grinding wheel as restraint can be categorized into four states, namely, two-body lapping, three-body polishing, abrasive jet machining and fluid hydrodynamic shear stress machining. The critical transition condition of two-body lapping to three-body polishing was analyzed. The single abrasive material removal models of two-body lapping, three-body polishing, abrasive jet finishing and fluid hydrodynamic shear stress machining were proposed. Experiments were performed in the refited plane grinding machine for theoretical modes verification. It was found that experimental results agreed with academic modes and the modes validity was verified.
