To address the curvature effect on single-row chevron-nozzle jet impingement heat transfer on concave surface,a series of experiments are conducted in the present investigation.Four concave surfaces including one semi...To address the curvature effect on single-row chevron-nozzle jet impingement heat transfer on concave surface,a series of experiments are conducted in the present investigation.Four concave surfaces including one semi-cylindrical concave surface and three parabolic concave surfaces with different width-to-depth ratios are tested under three typical Reynolds numbers(Re=5000,10000 and 15000)and several dimensionless nozzle-to-surface distances ranging from 1 to 8.The results show that the concave curvature has a clear impact on chevron-nozzle jet impingement heat transfer,tightly dependent on jet Reynolds number and impinging distance.In general,the semicylindrical concave surface produces the highest longitudinally-averaged Nusselt number at the leading line of concave surface.Under a low jet Reynolds number,the parabolic concave surface with a highly curved curvature produces higher longitudinally-averaged Nusselt number at the leading line and more uniform longitudinally-averaged Nusselt number distribution along the curvilinear direction.However,the longitudinally-averaged Nusselt number at the leading line of concave surface is the lowest for the highly curved surface under a high jet Reynolds number and large impinging distance.In comparison with the round-nozzle,chevron nozzle plays a more significant role on improving jet impingement heat transfer at small impinging distances.展开更多
The expansion process of ablation plasma jet in liquid was experimentally investigated by using high speed digital camera. The sequential pictures show that, in the initial stage of the jet, the Taylor cavity expands ...The expansion process of ablation plasma jet in liquid was experimentally investigated by using high speed digital camera. The sequential pictures show that, in the initial stage of the jet, the Taylor cavity expands in the axial and radial directions simultaneously, and then, is subjected to the constraint of chamber wall, in axial direction mainly. The maximum axial speed of the cavity's head ranges from 240m/s to 280m/s. Some strong heat conduction and mass transmission effects can be found in the surface of Taylor cavity, where the plasma cools down and condenses as solid particles while the liquid vaporizes as gas. Compared the expansion processes of the cavities among the different discharge energies and the nozzle diameters, it can be seen that the expansion speed of the cavity is directly proportional to the discharge energy and inversely to the nozzle diameter, and the effect of the discharge energy is stronger than that of the nozzle diameter. A set of equations describing the expansion process of ablation plasma jet was derived under the assumption of momentum conservation. The calculated results by use of the equations coincide with the experimented results better.展开更多
To solve the increasingly serious problem of "many wells,but low productivity"in China,the hydraulic jetting fracturing technology with coiled tubing,as a new measure for effectively improving the production...To solve the increasingly serious problem of "many wells,but low productivity"in China,the hydraulic jetting fracturing technology with coiled tubing,as a new measure for effectively improving the production rate of individual well and enhancing oil and gas recovery,merits much attention nowadays.On the basis of study of the hydraulic jetting fracturing mechanism with coiled tubing and numerical simulation of pressure distribution inside the pores,the mechanism of pressure rise inside the pores caused by the pressure boost action within the jetting pore and the hydraulic isolation action is examined,and the influence of main parameters on the pressure distribution inside the pores is analyzed.3 kinds of operating methods of hydraulic jetting fracturing with coiled tubing are raised with the tubular diameter of coiled tubing as an important feature parameter.According to the experimental study,the fracturing mechanism and computational results of numerical simulation are both examined.It is considered that under the same pressure drop of jet nozzle,the pressure inside the pores increases with the confining pressure nearly at a linear state.When the vertical depth of the borehole is rather big and the rupture pressure of the formation is higher,it is recommended to use higher pressure drop of jet nozzle for achieving better pressure boost and hydraulic isolation effect.For the hydraulic jetting fracturing with coiled tubing,the coiled tubing with tubular diameter not less than 50.8 mm(2 in.) is usually used.展开更多
The rotary water jetting is one of the most important techniques for horizontal well cleanup.The jet flow is used to remove plugging particles from sand control screens to recover their permeability.Currently,the oper...The rotary water jetting is one of the most important techniques for horizontal well cleanup.The jet flow is used to remove plugging particles from sand control screens to recover their permeability.Currently,the operation optimization of this technique depends mainly on experience due to absence of applicable evaluation and design models for removing plugging materials.This paper presents an experimental setup to simulate the cleanup process of plugged screens by rotary water jetting on the surface and to evaluate the performance of a jetting tool.Using real plugged screens pulled from damaged wells,a series of tests were performed,and the qualitative relationships between the cleanup efficiency and various operational parameters,such as the type of fluids used,flow rate,mode of tool movement,etc.,were obtained.The test results indicated that the cleanup performance was much better when the rotary jetting tool moved and stopped periodically for a certain time than that when it reciprocated at a constant speed.To be exact,it was desirable for the rotary jetting tool to move for 1.5-2 m and stop for 2-4 min,which was called the ＂move-stop-move＂ mode.Good cleanup performance could be obtained at high flow rates,and the flow rate was recommended to be no lower than 550-600 L/min.The test results also indicated that complex mud acid was better than clean water in terms of cleanup performance.Good cleanup efficiency and high screen permeability recovery could be achieved for severely plugged screens.Rotary jetting is preferred for the cleanup of horizontal wells with severely plugged screens,and the screen permeability recovery ratio may reach 20％ if optimized operation parameters were used.展开更多
JET has made unique contributions to the physics basis of ITER by virtue ofits ITER-like geometry, large plasma size and D-T capability. The paper discusses recent JET resultsand their implications for ITER in the are...JET has made unique contributions to the physics basis of ITER by virtue ofits ITER-like geometry, large plasma size and D-T capability. The paper discusses recent JET resultsand their implications for ITER in the areas of standard ELMy H-mode, D-T operation and advancedtokamak modes. In ELMy H-mode the separation of plasma energy into core and pedestal contributionsshows that core confinement scales like gyroBohm transport. High triangularity has a beneficialeffect on confinement and leads to an integrated plasma performance exceeding the ITER Q =10reference case. A revised type I ELM scaling predicts acceptable ELM energy losses for ITER, whileprogress in physics understanding of NTMs shows how to control them in ITER. The D-T experiments of1997 have validated ICRF scenarios for heating ITER/a reactor and identified ion minority schemes(e.g. (~3He)DT) with strong ion heating. They also show that the slowing down of alpha particles isclassical so that the self-heating by fusion alphas should cause no unexpected problems. With thePellet Enhanced Performance mode of 1988, JET has produced the first advanced tokamak mode, withpeaked pressure profiles sustained by reversed magnetic shear and strongly reduced transport. Morerecently, LHCD has provided easy tuning of reversed shear and reliable access to ITBs. Improvedphysics understanding shows that rational g-surfaces play a key role in the formation anddevelopment of ITBs. The demonstration of real time feedback control of plasma current and pressureprofiles opens the path towards fully controlled steady-state tokamak plasmas.展开更多
Arc voltage fluctuations in a direct current （DC） non-transferred arc plasma generator are experimentally studied, in generating a jet in the laminar, transitional and turbulent regimes. The study is with a view tow...Arc voltage fluctuations in a direct current （DC） non-transferred arc plasma generator are experimentally studied, in generating a jet in the laminar, transitional and turbulent regimes. The study is with a view toward elucidating the mechanism of the fluctuations and their relationship with the generating parameters, arc root movement and flow regimes. Results indicate that the existence of a 300 Hz alternating current （AC） component in the power supply ripples does not cause the transition of the laminar plasma jet into a turbulent state. There exists a high frequency fluctuation at 4 kHz in the turbulent jet regime. It may be related to the rapid movement of the anode attachment point of the arc.展开更多
The phenomenon of wastewater discharged into coastal waters can be simplified as a turbulent jet under the effect of waves and currents. Previous studies have been carried out to investigate the jet behaviors under th...The phenomenon of wastewater discharged into coastal waters can be simplified as a turbulent jet under the effect of waves and currents. Previous studies have been carried out to investigate the jet behaviors under the current only or the wave only environment. To obtain better understanding of the jet behaviors in a realistic situation, a series of physical experiments on the initial dilution of a vertical round jet in the wavy cross-flow environment are conducted. The diluted processes of the jet are recorded by a high-resolution camcorder and the concentration fields of the jet are measured with a peristaltic suction pumping system. When the jet is discharged into the wavy cross-flow environment, a distinctive phenomenon, namely ＂effluent clouds＂, is observed. According to the quantitative measurements, the jet width in the wavy cross-flow environment increases more significantly than that does in the cross-flow only environment, indicating that the waves impose a positive effect on the enhancement of jet initial dilution. In order to generalize the experimental findings, a comprehensive velocity scale ua and a characteristic length scale l are introduced. Through dimensional analysis, it is found that the dimensionless centerline concentration trajectories cy/l is in proportion to 1/3 power of the dimensionless downstream distance x/l, and the dimensionless centerline dilution 2c aS Q/（u l） is proportional to the square of the dimensionless centerline trajectory cy/l. Several empirical equations are then derived by using the Froude number of cross-flow Frc as a reference coefficient. This paper provides a better understanding and new estimations of the jet initial dilution under the combined effect of waves and cross-flow current.展开更多
<span><span style="font-family:;" "=""><span style="font-family:Verdana;"></span><span style="font-family:Verdana;">When there is a wall near ...<span><span style="font-family:;" "=""><span style="font-family:Verdana;"></span><span style="font-family:Verdana;">When there is a wall near the jet, it deflects and flows while being attached to the wall owing to the Coanda effect. The flow characteristics of the incompressible and two-imensional (2D) Coanda-reattached jets have been considerably explained. However, 2D supersonic under-expanded jets, reattached to side walls, have not been sufficiently investigated. These jets are used in gas-atomization to produce fine metal powder particles of several micrometers to several tens micrometers. In this case, the supersonic under-expanded jets are issued from an annular nozzle, which is set around a vertically in</span><span style="font-family:Verdana;">stalled circular nozzle for molten metal. The jet flow at the center</span><span style="font-family:Verdana;"> cross</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">-</span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">section of the annular jet resembles a 2D Coanda-reattached jet that deflects and attaches on the central axis. In this study, the flow characteristics of a supersonic under-expanded Coanda air jet from a 2D nozzle that reattaches to an offset side wall are elucidated through experiment and numerical analysis. For numerical analysis, we show how much it can express experimental results. The effects of supply pressure </span><i><span style="font-family:Verdana;">P</span><span style="font-family:Verdana;"><sub></sub></span><span style="font-family:Verdana;"></span></i><sub><span style="font-family:Verdana;">0</span><span style="font-family:Verdana;"></span></sub></span><span style="font-family:Verdana;"></span><span style="font-family:Verdana;"> on the flow characteristics such as the flow pattern, size of shock cell, reattachment distance, and velocity and pressure distributions, etc. are examined. The flow pattern was visualized by Schlieren method and the velocity distribution was measured using a Pitot tube. These results will be also useful in understanding the flow characteristics of a gas-atomization annular nozzle approximately.</span></span></span>展开更多
基金the financial supports for this project from the National Natural Science Foundation of China(No.51776097)the Open Fund of Jiangsu Province Key Laboratory of Aerospace Power System(No.APS20A7002)the Postgraduate Research and Practice Innovation Project of Jiangsu Province(No.KYCX17 0280)
文摘To address the curvature effect on single-row chevron-nozzle jet impingement heat transfer on concave surface,a series of experiments are conducted in the present investigation.Four concave surfaces including one semi-cylindrical concave surface and three parabolic concave surfaces with different width-to-depth ratios are tested under three typical Reynolds numbers(Re=5000,10000 and 15000)and several dimensionless nozzle-to-surface distances ranging from 1 to 8.The results show that the concave curvature has a clear impact on chevron-nozzle jet impingement heat transfer,tightly dependent on jet Reynolds number and impinging distance.In general,the semicylindrical concave surface produces the highest longitudinally-averaged Nusselt number at the leading line of concave surface.Under a low jet Reynolds number,the parabolic concave surface with a highly curved curvature produces higher longitudinally-averaged Nusselt number at the leading line and more uniform longitudinally-averaged Nusselt number distribution along the curvilinear direction.However,the longitudinally-averaged Nusselt number at the leading line of concave surface is the lowest for the highly curved surface under a high jet Reynolds number and large impinging distance.In comparison with the round-nozzle,chevron nozzle plays a more significant role on improving jet impingement heat transfer at small impinging distances.
基金Sponsored by the National Nature Science Foundation of China (10302102)
文摘The expansion process of ablation plasma jet in liquid was experimentally investigated by using high speed digital camera. The sequential pictures show that, in the initial stage of the jet, the Taylor cavity expands in the axial and radial directions simultaneously, and then, is subjected to the constraint of chamber wall, in axial direction mainly. The maximum axial speed of the cavity's head ranges from 240m/s to 280m/s. Some strong heat conduction and mass transmission effects can be found in the surface of Taylor cavity, where the plasma cools down and condenses as solid particles while the liquid vaporizes as gas. Compared the expansion processes of the cavities among the different discharge energies and the nozzle diameters, it can be seen that the expansion speed of the cavity is directly proportional to the discharge energy and inversely to the nozzle diameter, and the effect of the discharge energy is stronger than that of the nozzle diameter. A set of equations describing the expansion process of ablation plasma jet was derived under the assumption of momentum conservation. The calculated results by use of the equations coincide with the experimented results better.
基金2006 key project of National 863 Program,"Coiled Tubing Technique and Equipment",Item No.2006AA06A106
文摘To solve the increasingly serious problem of "many wells,but low productivity"in China,the hydraulic jetting fracturing technology with coiled tubing,as a new measure for effectively improving the production rate of individual well and enhancing oil and gas recovery,merits much attention nowadays.On the basis of study of the hydraulic jetting fracturing mechanism with coiled tubing and numerical simulation of pressure distribution inside the pores,the mechanism of pressure rise inside the pores caused by the pressure boost action within the jetting pore and the hydraulic isolation action is examined,and the influence of main parameters on the pressure distribution inside the pores is analyzed.3 kinds of operating methods of hydraulic jetting fracturing with coiled tubing are raised with the tubular diameter of coiled tubing as an important feature parameter.According to the experimental study,the fracturing mechanism and computational results of numerical simulation are both examined.It is considered that under the same pressure drop of jet nozzle,the pressure inside the pores increases with the confining pressure nearly at a linear state.When the vertical depth of the borehole is rather big and the rupture pressure of the formation is higher,it is recommended to use higher pressure drop of jet nozzle for achieving better pressure boost and hydraulic isolation effect.For the hydraulic jetting fracturing with coiled tubing,the coiled tubing with tubular diameter not less than 50.8 mm(2 in.) is usually used.
文摘The rotary water jetting is one of the most important techniques for horizontal well cleanup.The jet flow is used to remove plugging particles from sand control screens to recover their permeability.Currently,the operation optimization of this technique depends mainly on experience due to absence of applicable evaluation and design models for removing plugging materials.This paper presents an experimental setup to simulate the cleanup process of plugged screens by rotary water jetting on the surface and to evaluate the performance of a jetting tool.Using real plugged screens pulled from damaged wells,a series of tests were performed,and the qualitative relationships between the cleanup efficiency and various operational parameters,such as the type of fluids used,flow rate,mode of tool movement,etc.,were obtained.The test results indicated that the cleanup performance was much better when the rotary jetting tool moved and stopped periodically for a certain time than that when it reciprocated at a constant speed.To be exact,it was desirable for the rotary jetting tool to move for 1.5-2 m and stop for 2-4 min,which was called the ＂move-stop-move＂ mode.Good cleanup performance could be obtained at high flow rates,and the flow rate was recommended to be no lower than 550-600 L/min.The test results also indicated that complex mud acid was better than clean water in terms of cleanup performance.Good cleanup efficiency and high screen permeability recovery could be achieved for severely plugged screens.Rotary jetting is preferred for the cleanup of horizontal wells with severely plugged screens,and the screen permeability recovery ratio may reach 20％ if optimized operation parameters were used.
文摘JET has made unique contributions to the physics basis of ITER by virtue ofits ITER-like geometry, large plasma size and D-T capability. The paper discusses recent JET resultsand their implications for ITER in the areas of standard ELMy H-mode, D-T operation and advancedtokamak modes. In ELMy H-mode the separation of plasma energy into core and pedestal contributionsshows that core confinement scales like gyroBohm transport. High triangularity has a beneficialeffect on confinement and leads to an integrated plasma performance exceeding the ITER Q =10reference case. A revised type I ELM scaling predicts acceptable ELM energy losses for ITER, whileprogress in physics understanding of NTMs shows how to control them in ITER. The D-T experiments of1997 have validated ICRF scenarios for heating ITER/a reactor and identified ion minority schemes(e.g. (~3He)DT) with strong ion heating. They also show that the slowing down of alpha particles isclassical so that the self-heating by fusion alphas should cause no unexpected problems. With thePellet Enhanced Performance mode of 1988, JET has produced the first advanced tokamak mode, withpeaked pressure profiles sustained by reversed magnetic shear and strongly reduced transport. Morerecently, LHCD has provided easy tuning of reversed shear and reliable access to ITBs. Improvedphysics understanding shows that rational g-surfaces play a key role in the formation anddevelopment of ITBs. The demonstration of real time feedback control of plasma current and pressureprofiles opens the path towards fully controlled steady-state tokamak plasmas.
基金supported by National Natural Science Foundation of China (Nos.50336010,50276065)
文摘Arc voltage fluctuations in a direct current （DC） non-transferred arc plasma generator are experimentally studied, in generating a jet in the laminar, transitional and turbulent regimes. The study is with a view toward elucidating the mechanism of the fluctuations and their relationship with the generating parameters, arc root movement and flow regimes. Results indicate that the existence of a 300 Hz alternating current （AC） component in the power supply ripples does not cause the transition of the laminar plasma jet into a turbulent state. There exists a high frequency fluctuation at 4 kHz in the turbulent jet regime. It may be related to the rapid movement of the anode attachment point of the arc.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51379072 and 51309092)the Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20120094110016)+1 种基金the‘111’Project of the Ministry of Education and the State Administration of Foreign Experts AffairsChina(Grant No.B12032)
文摘The phenomenon of wastewater discharged into coastal waters can be simplified as a turbulent jet under the effect of waves and currents. Previous studies have been carried out to investigate the jet behaviors under the current only or the wave only environment. To obtain better understanding of the jet behaviors in a realistic situation, a series of physical experiments on the initial dilution of a vertical round jet in the wavy cross-flow environment are conducted. The diluted processes of the jet are recorded by a high-resolution camcorder and the concentration fields of the jet are measured with a peristaltic suction pumping system. When the jet is discharged into the wavy cross-flow environment, a distinctive phenomenon, namely ＂effluent clouds＂, is observed. According to the quantitative measurements, the jet width in the wavy cross-flow environment increases more significantly than that does in the cross-flow only environment, indicating that the waves impose a positive effect on the enhancement of jet initial dilution. In order to generalize the experimental findings, a comprehensive velocity scale ua and a characteristic length scale l are introduced. Through dimensional analysis, it is found that the dimensionless centerline concentration trajectories cy/l is in proportion to 1/3 power of the dimensionless downstream distance x/l, and the dimensionless centerline dilution 2c aS Q/（u l） is proportional to the square of the dimensionless centerline trajectory cy/l. Several empirical equations are then derived by using the Froude number of cross-flow Frc as a reference coefficient. This paper provides a better understanding and new estimations of the jet initial dilution under the combined effect of waves and cross-flow current.
文摘<span><span style="font-family:;" "=""><span style="font-family:Verdana;"></span><span style="font-family:Verdana;">When there is a wall near the jet, it deflects and flows while being attached to the wall owing to the Coanda effect. The flow characteristics of the incompressible and two-imensional (2D) Coanda-reattached jets have been considerably explained. However, 2D supersonic under-expanded jets, reattached to side walls, have not been sufficiently investigated. These jets are used in gas-atomization to produce fine metal powder particles of several micrometers to several tens micrometers. In this case, the supersonic under-expanded jets are issued from an annular nozzle, which is set around a vertically in</span><span style="font-family:Verdana;">stalled circular nozzle for molten metal. The jet flow at the center</span><span style="font-family:Verdana;"> cross</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">-</span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">section of the annular jet resembles a 2D Coanda-reattached jet that deflects and attaches on the central axis. In this study, the flow characteristics of a supersonic under-expanded Coanda air jet from a 2D nozzle that reattaches to an offset side wall are elucidated through experiment and numerical analysis. For numerical analysis, we show how much it can express experimental results. The effects of supply pressure </span><i><span style="font-family:Verdana;">P</span><span style="font-family:Verdana;"><sub></sub></span><span style="font-family:Verdana;"></span></i><sub><span style="font-family:Verdana;">0</span><span style="font-family:Verdana;"></span></sub></span><span style="font-family:Verdana;"></span><span style="font-family:Verdana;"> on the flow characteristics such as the flow pattern, size of shock cell, reattachment distance, and velocity and pressure distributions, etc. are examined. The flow pattern was visualized by Schlieren method and the velocity distribution was measured using a Pitot tube. These results will be also useful in understanding the flow characteristics of a gas-atomization annular nozzle approximately.</span></span></span>
