The jacket structure and transition piece comprise the supporting structure of a bottom-fixed offshore wind turbine(OWT)connected to the steel tower,which determines the overall structural dynamic performance of the e...The jacket structure and transition piece comprise the supporting structure of a bottom-fixed offshore wind turbine(OWT)connected to the steel tower,which determines the overall structural dynamic performance of the entire OWT.Ideally,optimal performance can be realized by effectively coordinating two components,notwithstanding their separate design processes.In pursuit of this objective,this paper proposes a concurrent design methodology for the jacket structure and transition piece by exploiting topology optimization(TO).The TO for a three-legged jacket foundation is formulated by minimizing static compliance.In contrast to conventional TO,two separated volume fractions are imposed upon the structural design domain of the jacket structure and transition piece to ensure continuity.A 5 MW(megawatt)OWT supported by a four-legged or three-legged jacket substructure is under investigation.The external loads are derived from various design load cases that are acquired using the commercial software platform DNV Bladed(Det Norske Veritas).Through a comparative analysis of the fundamental frequency and maximum nodal deformation,it was found that the optimized solution demonstrates a reduced weight and superior stiffness.The findings demonstrate the present concurrent design approach using TO can yield significant benefits by reducing the overall design cycle and enhancing the feasibility of the final design.展开更多
The novel structural reliability methodology presented in this study is especially well suited for multidimensional structural dynamics that are physically measured or numerically simulated over a representative timel...The novel structural reliability methodology presented in this study is especially well suited for multidimensional structural dynamics that are physically measured or numerically simulated over a representative timelapse.The Gaidai multivariate reliability method is applied to an operational offshore Jacket platform that operates in Bohai Bay.This study demonstrates the feasibility of this method to accurately estimate collapse risks in dynamic systems under in situ environmental stressors.Modern reliability approaches do not cope easily with the high dimensionality of real engineering dynamic systems,as well as nonlinear intercorrelations between various structural components.The Jacket offshore platform is chosen as the case study for this reliability analysis because of the presence of various hotspot stresses that synchronously arise in its structural parts.The authors provide a straightforward,precise method for estimating overall risks of operational failure,damage,or hazard for nonlinear multidimensional dynamic systems.The latter tool is important for offshore engineers during the design stage.展开更多
A set of parametric stress analyses was carried out for two-planar tubular DKT-joints under different axial loading conditions. The analysis results were used to present general remarks on the effects of the geometric...A set of parametric stress analyses was carried out for two-planar tubular DKT-joints under different axial loading conditions. The analysis results were used to present general remarks on the effects of the geometrical parameters on stress concentration factors （SCFs） at the inner saddle, outer saddle, and crown positions on the central brace. Based on results of finite element （FE） analysis and through nonlinear regression analysis, a new set of SCF parametric equations was established for fatigue design purposes. An assessment study of equations was conducted against the experimental data and original SCF database. The satisfaction of acceptance criteria proposed by the UK Department of Energy （UK DoE） was also checked. Results of parametric study showed that highly remarkable differences exist between the SCF values in a multi-planar DKT-joint and the corresponding SCFs in an equivalent uni-planar KT-joint having the same geometrical properties. It can be clearly concluded from this observation that using the equations proposed for uni-planar KT-connections to compute the SCFs in multi-planar DKT-joints will lead to either considerably under-predicting or over-predicting results. Hence, it is necessary to develop SCF formulae specially designed for multi-planar DKT-joints. Good results of equation assessment according to UK DoE acceptance criteria, high values of correlation coefficients, and the satisfactory agreement between the predictions of the proposed equations and the experimental data guarantee the accuracy of the equations. Therefore, the developed equations can be reliably used for fatigue design of offshore structures.展开更多
This paper proposes a risk-identification-based hybrid method for estimating the system reliability of steel jacket structures under fire.The proposed method starts with risk identification;according to the results of...This paper proposes a risk-identification-based hybrid method for estimating the system reliability of steel jacket structures under fire.The proposed method starts with risk identification;according to the results of hazard identification and Dow’s fire and explosion index(F&EI) methodology,the most dangerous hazard sources are determined.In term of each equipment layout in steel jacket structures,fire load is imposed and elasto-plastic analysis is performed.According to the deformed state of steel jacket structures,the weakest failure mode of steel jacket structures is identified.In order to know the effect on ultimate bearing capacity of the offshore structural system,a series of elasto-plastic analyses are performed in which single failure element contained in the weakest failure mode is removed from the whole offshore platform structural system.Finally,the failure function of the steel jacket structure is generated and the failure probability of the steel jacket structure system is estimated under fire by genetic algorithm via MATLAB program.展开更多
基金supports were received from the National Key Research and Development Program of China(2024YFE0208600)New Energy Joint Laboratory of China Southern Power Grid Corporation(GDXNY2024KF03)+2 种基金the National Natural Science Foundation of China(Grant No.U24B2090)National Key R&D Program(No.2022YFB4201300)Science and Technology Project of Huaneng Group(HNKJ24-H78).
文摘The jacket structure and transition piece comprise the supporting structure of a bottom-fixed offshore wind turbine(OWT)connected to the steel tower,which determines the overall structural dynamic performance of the entire OWT.Ideally,optimal performance can be realized by effectively coordinating two components,notwithstanding their separate design processes.In pursuit of this objective,this paper proposes a concurrent design methodology for the jacket structure and transition piece by exploiting topology optimization(TO).The TO for a three-legged jacket foundation is formulated by minimizing static compliance.In contrast to conventional TO,two separated volume fractions are imposed upon the structural design domain of the jacket structure and transition piece to ensure continuity.A 5 MW(megawatt)OWT supported by a four-legged or three-legged jacket substructure is under investigation.The external loads are derived from various design load cases that are acquired using the commercial software platform DNV Bladed(Det Norske Veritas).Through a comparative analysis of the fundamental frequency and maximum nodal deformation,it was found that the optimized solution demonstrates a reduced weight and superior stiffness.The findings demonstrate the present concurrent design approach using TO can yield significant benefits by reducing the overall design cycle and enhancing the feasibility of the final design.
文摘The novel structural reliability methodology presented in this study is especially well suited for multidimensional structural dynamics that are physically measured or numerically simulated over a representative timelapse.The Gaidai multivariate reliability method is applied to an operational offshore Jacket platform that operates in Bohai Bay.This study demonstrates the feasibility of this method to accurately estimate collapse risks in dynamic systems under in situ environmental stressors.Modern reliability approaches do not cope easily with the high dimensionality of real engineering dynamic systems,as well as nonlinear intercorrelations between various structural components.The Jacket offshore platform is chosen as the case study for this reliability analysis because of the presence of various hotspot stresses that synchronously arise in its structural parts.The authors provide a straightforward,precise method for estimating overall risks of operational failure,damage,or hazard for nonlinear multidimensional dynamic systems.The latter tool is important for offshore engineers during the design stage.
文摘A set of parametric stress analyses was carried out for two-planar tubular DKT-joints under different axial loading conditions. The analysis results were used to present general remarks on the effects of the geometrical parameters on stress concentration factors （SCFs） at the inner saddle, outer saddle, and crown positions on the central brace. Based on results of finite element （FE） analysis and through nonlinear regression analysis, a new set of SCF parametric equations was established for fatigue design purposes. An assessment study of equations was conducted against the experimental data and original SCF database. The satisfaction of acceptance criteria proposed by the UK Department of Energy （UK DoE） was also checked. Results of parametric study showed that highly remarkable differences exist between the SCF values in a multi-planar DKT-joint and the corresponding SCFs in an equivalent uni-planar KT-joint having the same geometrical properties. It can be clearly concluded from this observation that using the equations proposed for uni-planar KT-connections to compute the SCFs in multi-planar DKT-joints will lead to either considerably under-predicting or over-predicting results. Hence, it is necessary to develop SCF formulae specially designed for multi-planar DKT-joints. Good results of equation assessment according to UK DoE acceptance criteria, high values of correlation coefficients, and the satisfactory agreement between the predictions of the proposed equations and the experimental data guarantee the accuracy of the equations. Therefore, the developed equations can be reliably used for fatigue design of offshore structures.
基金the National High Technology Research and Development Program(863) of China (No.2007AA09Z322)the Independent Research Project of the State Key Laboratory of Ocean Engineering of Shanghai Jiaotong University(No.GKZD010049)
文摘This paper proposes a risk-identification-based hybrid method for estimating the system reliability of steel jacket structures under fire.The proposed method starts with risk identification;according to the results of hazard identification and Dow’s fire and explosion index(F&EI) methodology,the most dangerous hazard sources are determined.In term of each equipment layout in steel jacket structures,fire load is imposed and elasto-plastic analysis is performed.According to the deformed state of steel jacket structures,the weakest failure mode of steel jacket structures is identified.In order to know the effect on ultimate bearing capacity of the offshore structural system,a series of elasto-plastic analyses are performed in which single failure element contained in the weakest failure mode is removed from the whole offshore platform structural system.Finally,the failure function of the steel jacket structure is generated and the failure probability of the steel jacket structure system is estimated under fire by genetic algorithm via MATLAB program.
