In this study, a combined experimental, numerical and theoretical investigation is conducted on the penetration of semi-infinite 4340 steel targets by a homogeneous 93 W rod and two types of jacketed rods with strikin...In this study, a combined experimental, numerical and theoretical investigation is conducted on the penetration of semi-infinite 4340 steel targets by a homogeneous 93 W rod and two types of jacketed rods with striking velocities of 0.9-3.3 km/s. The results show that the jacketed rods produced typical“co-erosion” damage at all test velocities, except for the 93 W/1060 Al jacketed rod, which switched from an early “bi-erosion” damage to later “co-erosion” damage at a striking velocity of 936 m/s. However, the homogeneous 93 W rod always forms a large mushroom head during the penetration process. The damage mechanisms of these two types of jacketed rods differ for striking velocities of 0.9-2.0 km/s, but this difference gradually decreases with increased striking velocity. For velocities of 2.0-3.3 km/s, all three types of projectiles exhibit typical hydrodynamic penetration characteristics, and the damage mechanisms of the two types of jacketed rods are almost identical. For the same initial kinetic energy, the penetration performance of the jacketed rods is distinctly superior to that of the homogeneous 93 W rods.Compared with jacket density, jacket strength shows a more significant influence on the damage mechanism and penetration performance of the jacketed rod. Finally, an existing theoretical prediction model of the penetration depth of jacketed rods on semi-infinite targets in the co-erosion mode is modified. It transpires that-in terms of penetration depth-the modified theoretical model is in good agreement with the experimental and numerical observations for 93 W/TC4 and 93 W/1060 Al jacketed rods penetrating semi-infinite 4340 steel targets.展开更多
In this paper,the fixed_point theorem is used to estimated an asymptotic solution of initial value problems for a class of third nonlinear differential equations which has double initial_layer properties. We obtain th...In this paper,the fixed_point theorem is used to estimated an asymptotic solution of initial value problems for a class of third nonlinear differential equations which has double initial_layer properties. We obtain the uniformly valid asymptotic expansion of any orders including boundary layers.展开更多
A group of the mesogen jacketed liquid crystal polymers based on the monomers 2,5-bis (4-substituted benzoyl)oxystyrenes are synthesized. The substituents include alkoxy, alkyl, and cyano groups. The synthesis and the...A group of the mesogen jacketed liquid crystal polymers based on the monomers 2,5-bis (4-substituted benzoyl)oxystyrenes are synthesized. The substituents include alkoxy, alkyl, and cyano groups. The synthesis and the primary characterization of the liquid crystal phase of the monomers and the polymers are described. While some of the monomers give smectic textures the polymers are found to be nematic above their melting or glass transition temperatures. Interestingly the unsubstituted monomer and its polymer poly 2,5-di( benzoyloxy ) styrene are also liquid crystalline. The single crystal structure of one of the monomers is also discussed.展开更多
Dear Li Mingchao,How are you?I miss you very much.Many thanks for the leather jacket!I really love it.Green is my favorite color!You kept it in mind!It's just my size.Every time I wear it,I think of you.I'm fi...Dear Li Mingchao,How are you?I miss you very much.Many thanks for the leather jacket!I really love it.Green is my favorite color!You kept it in mind!It's just my size.Every time I wear it,I think of you.I'm fine here in Hong Kong.Last week I had a birthday party.展开更多
Concrete is one of the most important elements in building construction.However,concrete used in construction is susceptible to damage due to corrosion.The influence of corrosive substances causes changes in the reinf...Concrete is one of the most important elements in building construction.However,concrete used in construction is susceptible to damage due to corrosion.The influence of corrosive substances causes changes in the reinforcing steel and affects the strength of the structure.The repair method is one approach to overcome this problem.This research aims to determine the effect of grouting and jacketing repairs on corroded concrete.The concrete used has dimensions of 15 cm×15 cm×60 cm with planned corrosion variations of 50%,60%,and 70%.The test objects were tested using the Non-Destructive Testing(NDT)method using Ultrasonic Pulse Velocity(UPV).The test results show that the average speed of normal concrete is 5070 m/s,while the lowest average speed is 3070 m/s on the 70%planned corrosion test object.The test object was then given a load of 1600 kgf.At this stage,there is a decrease in speed and wave shape with the lowest average speed obtained at 2753 m/s.The repair method is an effort to restore concrete performance by using grouting and jacketing.Grouting is done by injecting mortar material into it.Jacketing involves adding thickness to the existing concrete layer with additional layers of concrete.After improvements were made,there was an improvement in the UPV test,with a peak speed value of 4910 m/s.Repairing concrete by filling cracks can improve concrete continuity and reduce waveform distortion,thereby increasing wave propagation speed.展开更多
1 In a town of fewer than 1,000 people,it can be hard to keep a secret.And yet no one in McBride,a mountain community in British Columbia,can figure out how a local deer came to be wearing a reflective jacket or why t...1 In a town of fewer than 1,000 people,it can be hard to keep a secret.And yet no one in McBride,a mountain community in British Columbia,can figure out how a local deer came to be wearing a reflective jacket or why the deer has been so hard to track down.展开更多
In recent years,outdoor apparel that combines functionality with fashion has become a focal point in the market.As research on fluorinated compounds deepens,calls for eliminating PFAS(per-and poly fluorinated alkyl su...In recent years,outdoor apparel that combines functionality with fashion has become a focal point in the market.As research on fluorinated compounds deepens,calls for eliminating PFAS(per-and poly fluorinated alkyl substances)are growing louder.Traditional outdoor equipment such as waterproof jackets and hiking boots have long relied on PFAS for water and oil resistance,yet this comes at the potential cost of threatening ecosystems and consumer health.An innovationdriven sustainable transformation is now emerging—a growing number of pioneering brands are developing eco-friendly,PFAS-free alternatives,redefining the standards of high performance.展开更多
The novel structural reliability methodology presented in this study is especially well suited for multidimensional structural dynamics that are physically measured or numerically simulated over a representative timel...The novel structural reliability methodology presented in this study is especially well suited for multidimensional structural dynamics that are physically measured or numerically simulated over a representative timelapse.The Gaidai multivariate reliability method is applied to an operational offshore Jacket platform that operates in Bohai Bay.This study demonstrates the feasibility of this method to accurately estimate collapse risks in dynamic systems under in situ environmental stressors.Modern reliability approaches do not cope easily with the high dimensionality of real engineering dynamic systems,as well as nonlinear intercorrelations between various structural components.The Jacket offshore platform is chosen as the case study for this reliability analysis because of the presence of various hotspot stresses that synchronously arise in its structural parts.The authors provide a straightforward,precise method for estimating overall risks of operational failure,damage,or hazard for nonlinear multidimensional dynamic systems.The latter tool is important for offshore engineers during the design stage.展开更多
As an important part of offshore wind turbine support and fixed units, the multibucket jacket foundation bears large loads and a complex marine environment. In this paper, the horizontal bearing characteristics of the...As an important part of offshore wind turbine support and fixed units, the multibucket jacket foundation bears large loads and a complex marine environment. In this paper, the horizontal bearing characteristics of the four-bucket jacket foundation of offshore wind power in sandy soil are studied. Through model tests and numerical simulations, the influence of bucket foundation sealing properties, load application speed, and loading direction on foundation-bearing capacity are discussed. The results show that the horizontal ultimate bearing capacity of the foundation in the nonsealing condition is decreased by 51.3% compared with the sealing condition;therefore, after the foundation penetration construction is completed, the bucket sealing must be ensured to increase the load-bearing performance of the structure. At a loading speed of 3.25 mm/s, the horizontal ultimate bearing capacity of the foundation is increased by 9.4% over the working condition of 1.85 mm/s. The bearing capacity of the foundation is maximized in the loading direction α =45° and is the smallest when α =0°. That is, the foundation can maximize its loadbearing performance under the condition of single-bucket compression/tension. During the design process, the main load of the structure should be loaded in the 45° direction. The contrast error of the experiment and numerical simulation does not exceed 10%. The research results have important guiding importance for designing and constructing the jacket foundation and can be used as a reference for the stable operation and sustainable development of offshore wind power systems.展开更多
Have we ever seen such a shocking garment in the fashion industry?A down jacket that claims to be one but uses absolutely no down,yet possesses remarkable heating and insulating properties,all designed with a colorles...Have we ever seen such a shocking garment in the fashion industry?A down jacket that claims to be one but uses absolutely no down,yet possesses remarkable heating and insulating properties,all designed with a colorless aesthetic.It resembles clothing that has come from the future.The secret behind this captivating design lies in"SOLAMENTR■"developed by Sumitomo Metal Mining Co.,Ltd.展开更多
Outdoor jackets are engineered to protect against extreme weather while ensuring comfort and safety. Key to this protection is the thermal properties, achieved through insulation materials like down feathers and synth...Outdoor jackets are engineered to protect against extreme weather while ensuring comfort and safety. Key to this protection is the thermal properties, achieved through insulation materials like down feathers and synthetic fibers, which trap heat and minimize heat loss. Resistance to wind, rain, and snow is provided by waterproof and windproof fabrics, while breathability allows moisture to escape, maintaining a comfortable microclimate. Air permeability and water resistance are essential for achieving this balance. This study examines two outdoor jacket prototypes with six material layers each. The outer layer (Layer 1) consists of 100% polyester coated with polyurethane for waterproofing. Inner layers (Layers 2, 3, and 6) use wool/cotton and wool/polyamide blends, offering insulation and moisture-wicking properties. Down feathers are used as the filling material, providing excellent warmth. Advanced materials like graphene and silver honeycomb fabrics were included to enhance thermal conductivity and regulate heat transfer. Performance testing focused on thermal conductivity, comfort (water and air permeability), and mechanical properties like tensile strength and tear resistance. Tests also assessed spray application and fastness to evaluate durability under environmental exposure. Results showed that jackets with silver-infused honeycomb fabrics had superior thermal conductivity, enabling better heat regulation and comfort in harsh conditions. The findings highlight the advantages of integrating silver honeycomb fabrics into outdoor jackets. These materials enhance insulation, thermal regulation, and overall comfort, making them ideal for high-performance designs. Incorporating such fabrics ensures functionality, durability, and user protection in extreme environments.展开更多
Jacket platforms constitute the foundational infrastructure of offshore oil and gas field exploitation.How to efficiently and accurately monitor the mechanical properties of jacket structures is one of the key problem...Jacket platforms constitute the foundational infrastructure of offshore oil and gas field exploitation.How to efficiently and accurately monitor the mechanical properties of jacket structures is one of the key problems to be solved to ensure the safe operation of the platform.To address the practical engineering problem that it is difficult to monitor the stress response of the tubular joints of jacket platforms online,a digital twin reduced-order method for real-time prediction of the stress response of tubular joints is proposed.In the offline construction phase,multi-scale modeling and multi-parameter experimental design methods are used to obtain the stress response data set of the jacket structure.Proper orthogonal decomposition is employed to extract the main feature information from the snapshot matrix,resulting in a reduced-order basis.The leave-one-out cross-validation method is used to select the optimal modal order for constructing the reduced-order model(ROM).In the online prediction phase,a digital twin model of the tubular joint is established,and the prediction performance of the ROM is analyzed and verified through using random environmental load and field environmental monitoring data.The results indicate that,compared with traditional numerical simulations of tubular joints,the ROM based on the proposed reduced-order method is more efficient in predicting the stress response of tubular joints while ensuring accuracy and robustness.展开更多
The jacket structure and transition piece comprise the supporting structure of a bottom-fixed offshore wind turbine(OWT)connected to the steel tower,which determines the overall structural dynamic performance of the e...The jacket structure and transition piece comprise the supporting structure of a bottom-fixed offshore wind turbine(OWT)connected to the steel tower,which determines the overall structural dynamic performance of the entire OWT.Ideally,optimal performance can be realized by effectively coordinating two components,notwithstanding their separate design processes.In pursuit of this objective,this paper proposes a concurrent design methodology for the jacket structure and transition piece by exploiting topology optimization(TO).The TO for a three-legged jacket foundation is formulated by minimizing static compliance.In contrast to conventional TO,two separated volume fractions are imposed upon the structural design domain of the jacket structure and transition piece to ensure continuity.A 5 MW(megawatt)OWT supported by a four-legged or three-legged jacket substructure is under investigation.The external loads are derived from various design load cases that are acquired using the commercial software platform DNV Bladed(Det Norske Veritas).Through a comparative analysis of the fundamental frequency and maximum nodal deformation,it was found that the optimized solution demonstrates a reduced weight and superior stiffness.The findings demonstrate the present concurrent design approach using TO can yield significant benefits by reducing the overall design cycle and enhancing the feasibility of the final design.展开更多
On the stage of China Media Group’s 2025 Spring Festival Gala,more than a dozen humanoid robots dressed in floral padded jackets danced alongside human counterparts in a creative folk dance performance.The robots not...On the stage of China Media Group’s 2025 Spring Festival Gala,more than a dozen humanoid robots dressed in floral padded jackets danced alongside human counterparts in a creative folk dance performance.The robots not only smoothly twisted their waists and mimicked human leg-kicking movements,but also spun handkerchiefs,displaying extremely dexterous moves and exceptional skills.展开更多
This study investigates the seismic response mitigation of an offshore jacket platform via a novel damping system,the bidirectional tuned liquid column gas damper(BTLCGD).To efficiently model the complex platform stru...This study investigates the seismic response mitigation of an offshore jacket platform via a novel damping system,the bidirectional tuned liquid column gas damper(BTLCGD).To efficiently model the complex platform structure,an equivalent single degree of freedom approach was employed.Since the mass contribution of the first mode of the platform is more than 90%,this simplification significantly reduces the computational burden while maintaining accuracy.Therefore,this structure was modeled and analyzed on a scale of 1 to 36 using the Froudian law.To address the limitations of conventional tuned liquid column gas dampers(TLCGDs),which are susceptible to the directionality of seismic excitations,BTLCGD was proposed.This innovative damper is designed to operate effectively in two orthogonal directions,thereby improving seismic performance.Through numerical simulations,the performance of both TLCGD and BTLCGD was evaluated under seismic loading.The results demonstrated that BTLCGD significantly outperforms TLCGD in terms of reducing structural responses,particularly in the direction where TLCGD is ineffective.Furthermore,BTLCGD offers advantages in terms of installation and space requirements.The results of this research offer valuable perspectives into the design and implementation of effective damping systems for offshore structures,contributing to enhanced structural integrity and safety.展开更多
In order to study the effectiveness of combined carbon fiber-reinforced polymer （CFRP） sheets and steel jacket in strengthening the seismic performance of corrosion-damaged reinforced concrete （RC） columns, twelve...In order to study the effectiveness of combined carbon fiber-reinforced polymer （CFRP） sheets and steel jacket in strengthening the seismic performance of corrosion-damaged reinforced concrete （RC） columns, twelve reinforced concrete columns are tested under combined lateral cyclic displacement excursions and constant axial load. The variables studied in this program include effects of corrosion degree of the rebars, level of axial load, the amount of CFRP sheets and steel jacket. The results indicate that the combined CFRP and steel jacket retrofitting technique is effective in improving load-carrying, ductility and energy absorption capacity of the columns. Compared with the corrosion-damaged RC column, the lateral load and the ductility factor of many strengthened columns increase more than 90% and 100%, respectively. The formulae for the calculation of the yielding load, the maximum lateral load and the displacement ductility factor of the strengthened columns under combined constant axial load and cyclically increasing lateral loading are developed. The test results are also compared with the results obtained from the proposed formulae. A good agreement between calculated values and experimental results is observed.展开更多
Laminar flow and heat transfer characteristics of jacketed vessel with triangular flow channels were numerically studied under hydrodynamically and thermally fully developed conditions. Constant heat flux at theheated...Laminar flow and heat transfer characteristics of jacketed vessel with triangular flow channels were numerically studied under hydrodynamically and thermally fully developed conditions. Constant heat flux at theheated wall was assumed. The numerical program code interms of vorticity, stream function, axial velocity com ponent and energy equations was written based on a finite volume method. Based on the numerical results, the flow and temperature field were given, and the effects of Dean and Prandtl numbers on flow and heat transfer were ex amined, and the correlations of flow resistance and mean Nusselt number were developed for the jacket. The results show that the structure of secondary flow is steady two vortices in the investigated range of dimensionless curvatureratio and Reynolds number. Two peaks of local Nusselt number increase significantly with Prandtl and Dean num ber increasing, but the local Nusselt numbers near two ends and at the center of the heated wall increase only slightly. The center and two ends of heated wall are the poor positions for heat transfer in the jacket. Compared with the outer half coil jacket at the same area of heated wall, curvature radius, Reynolds number and Prandtl number, e jacket of triangular flow chmnel has lower flow resistance and less mean Nusselt number.展开更多
基金supported by the National Natural Science Foundation of China(Grant nos.:11672138,11602113)Foundation of National Key Lab.of Transient Physics(Grant no.:6142604180407,JCKYS2020606004).
文摘In this study, a combined experimental, numerical and theoretical investigation is conducted on the penetration of semi-infinite 4340 steel targets by a homogeneous 93 W rod and two types of jacketed rods with striking velocities of 0.9-3.3 km/s. The results show that the jacketed rods produced typical“co-erosion” damage at all test velocities, except for the 93 W/1060 Al jacketed rod, which switched from an early “bi-erosion” damage to later “co-erosion” damage at a striking velocity of 936 m/s. However, the homogeneous 93 W rod always forms a large mushroom head during the penetration process. The damage mechanisms of these two types of jacketed rods differ for striking velocities of 0.9-2.0 km/s, but this difference gradually decreases with increased striking velocity. For velocities of 2.0-3.3 km/s, all three types of projectiles exhibit typical hydrodynamic penetration characteristics, and the damage mechanisms of the two types of jacketed rods are almost identical. For the same initial kinetic energy, the penetration performance of the jacketed rods is distinctly superior to that of the homogeneous 93 W rods.Compared with jacket density, jacket strength shows a more significant influence on the damage mechanism and penetration performance of the jacketed rod. Finally, an existing theoretical prediction model of the penetration depth of jacketed rods on semi-infinite targets in the co-erosion mode is modified. It transpires that-in terms of penetration depth-the modified theoretical model is in good agreement with the experimental and numerical observations for 93 W/TC4 and 93 W/1060 Al jacketed rods penetrating semi-infinite 4340 steel targets.
文摘In this paper,the fixed_point theorem is used to estimated an asymptotic solution of initial value problems for a class of third nonlinear differential equations which has double initial_layer properties. We obtain the uniformly valid asymptotic expansion of any orders including boundary layers.
文摘A group of the mesogen jacketed liquid crystal polymers based on the monomers 2,5-bis (4-substituted benzoyl)oxystyrenes are synthesized. The substituents include alkoxy, alkyl, and cyano groups. The synthesis and the primary characterization of the liquid crystal phase of the monomers and the polymers are described. While some of the monomers give smectic textures the polymers are found to be nematic above their melting or glass transition temperatures. Interestingly the unsubstituted monomer and its polymer poly 2,5-di( benzoyloxy ) styrene are also liquid crystalline. The single crystal structure of one of the monomers is also discussed.
文摘Dear Li Mingchao,How are you?I miss you very much.Many thanks for the leather jacket!I really love it.Green is my favorite color!You kept it in mind!It's just my size.Every time I wear it,I think of you.I'm fine here in Hong Kong.Last week I had a birthday party.
基金supported by the Ministry of Education,Culture,Research,and Technology(Indonesia),Grant number 107/E5/PG.02.00.PL/2024,AZ.
文摘Concrete is one of the most important elements in building construction.However,concrete used in construction is susceptible to damage due to corrosion.The influence of corrosive substances causes changes in the reinforcing steel and affects the strength of the structure.The repair method is one approach to overcome this problem.This research aims to determine the effect of grouting and jacketing repairs on corroded concrete.The concrete used has dimensions of 15 cm×15 cm×60 cm with planned corrosion variations of 50%,60%,and 70%.The test objects were tested using the Non-Destructive Testing(NDT)method using Ultrasonic Pulse Velocity(UPV).The test results show that the average speed of normal concrete is 5070 m/s,while the lowest average speed is 3070 m/s on the 70%planned corrosion test object.The test object was then given a load of 1600 kgf.At this stage,there is a decrease in speed and wave shape with the lowest average speed obtained at 2753 m/s.The repair method is an effort to restore concrete performance by using grouting and jacketing.Grouting is done by injecting mortar material into it.Jacketing involves adding thickness to the existing concrete layer with additional layers of concrete.After improvements were made,there was an improvement in the UPV test,with a peak speed value of 4910 m/s.Repairing concrete by filling cracks can improve concrete continuity and reduce waveform distortion,thereby increasing wave propagation speed.
文摘1 In a town of fewer than 1,000 people,it can be hard to keep a secret.And yet no one in McBride,a mountain community in British Columbia,can figure out how a local deer came to be wearing a reflective jacket or why the deer has been so hard to track down.
文摘In recent years,outdoor apparel that combines functionality with fashion has become a focal point in the market.As research on fluorinated compounds deepens,calls for eliminating PFAS(per-and poly fluorinated alkyl substances)are growing louder.Traditional outdoor equipment such as waterproof jackets and hiking boots have long relied on PFAS for water and oil resistance,yet this comes at the potential cost of threatening ecosystems and consumer health.An innovationdriven sustainable transformation is now emerging—a growing number of pioneering brands are developing eco-friendly,PFAS-free alternatives,redefining the standards of high performance.
文摘The novel structural reliability methodology presented in this study is especially well suited for multidimensional structural dynamics that are physically measured or numerically simulated over a representative timelapse.The Gaidai multivariate reliability method is applied to an operational offshore Jacket platform that operates in Bohai Bay.This study demonstrates the feasibility of this method to accurately estimate collapse risks in dynamic systems under in situ environmental stressors.Modern reliability approaches do not cope easily with the high dimensionality of real engineering dynamic systems,as well as nonlinear intercorrelations between various structural components.The Jacket offshore platform is chosen as the case study for this reliability analysis because of the presence of various hotspot stresses that synchronously arise in its structural parts.The authors provide a straightforward,precise method for estimating overall risks of operational failure,damage,or hazard for nonlinear multidimensional dynamic systems.The latter tool is important for offshore engineers during the design stage.
文摘As an important part of offshore wind turbine support and fixed units, the multibucket jacket foundation bears large loads and a complex marine environment. In this paper, the horizontal bearing characteristics of the four-bucket jacket foundation of offshore wind power in sandy soil are studied. Through model tests and numerical simulations, the influence of bucket foundation sealing properties, load application speed, and loading direction on foundation-bearing capacity are discussed. The results show that the horizontal ultimate bearing capacity of the foundation in the nonsealing condition is decreased by 51.3% compared with the sealing condition;therefore, after the foundation penetration construction is completed, the bucket sealing must be ensured to increase the load-bearing performance of the structure. At a loading speed of 3.25 mm/s, the horizontal ultimate bearing capacity of the foundation is increased by 9.4% over the working condition of 1.85 mm/s. The bearing capacity of the foundation is maximized in the loading direction α =45° and is the smallest when α =0°. That is, the foundation can maximize its loadbearing performance under the condition of single-bucket compression/tension. During the design process, the main load of the structure should be loaded in the 45° direction. The contrast error of the experiment and numerical simulation does not exceed 10%. The research results have important guiding importance for designing and constructing the jacket foundation and can be used as a reference for the stable operation and sustainable development of offshore wind power systems.
文摘Have we ever seen such a shocking garment in the fashion industry?A down jacket that claims to be one but uses absolutely no down,yet possesses remarkable heating and insulating properties,all designed with a colorless aesthetic.It resembles clothing that has come from the future.The secret behind this captivating design lies in"SOLAMENTR■"developed by Sumitomo Metal Mining Co.,Ltd.
文摘Outdoor jackets are engineered to protect against extreme weather while ensuring comfort and safety. Key to this protection is the thermal properties, achieved through insulation materials like down feathers and synthetic fibers, which trap heat and minimize heat loss. Resistance to wind, rain, and snow is provided by waterproof and windproof fabrics, while breathability allows moisture to escape, maintaining a comfortable microclimate. Air permeability and water resistance are essential for achieving this balance. This study examines two outdoor jacket prototypes with six material layers each. The outer layer (Layer 1) consists of 100% polyester coated with polyurethane for waterproofing. Inner layers (Layers 2, 3, and 6) use wool/cotton and wool/polyamide blends, offering insulation and moisture-wicking properties. Down feathers are used as the filling material, providing excellent warmth. Advanced materials like graphene and silver honeycomb fabrics were included to enhance thermal conductivity and regulate heat transfer. Performance testing focused on thermal conductivity, comfort (water and air permeability), and mechanical properties like tensile strength and tear resistance. Tests also assessed spray application and fastness to evaluate durability under environmental exposure. Results showed that jackets with silver-infused honeycomb fabrics had superior thermal conductivity, enabling better heat regulation and comfort in harsh conditions. The findings highlight the advantages of integrating silver honeycomb fabrics into outdoor jackets. These materials enhance insulation, thermal regulation, and overall comfort, making them ideal for high-performance designs. Incorporating such fabrics ensures functionality, durability, and user protection in extreme environments.
基金financially supported by the National Natural Science Foundation of China(Grant No.11472076).
文摘Jacket platforms constitute the foundational infrastructure of offshore oil and gas field exploitation.How to efficiently and accurately monitor the mechanical properties of jacket structures is one of the key problems to be solved to ensure the safe operation of the platform.To address the practical engineering problem that it is difficult to monitor the stress response of the tubular joints of jacket platforms online,a digital twin reduced-order method for real-time prediction of the stress response of tubular joints is proposed.In the offline construction phase,multi-scale modeling and multi-parameter experimental design methods are used to obtain the stress response data set of the jacket structure.Proper orthogonal decomposition is employed to extract the main feature information from the snapshot matrix,resulting in a reduced-order basis.The leave-one-out cross-validation method is used to select the optimal modal order for constructing the reduced-order model(ROM).In the online prediction phase,a digital twin model of the tubular joint is established,and the prediction performance of the ROM is analyzed and verified through using random environmental load and field environmental monitoring data.The results indicate that,compared with traditional numerical simulations of tubular joints,the ROM based on the proposed reduced-order method is more efficient in predicting the stress response of tubular joints while ensuring accuracy and robustness.
基金supports were received from the National Key Research and Development Program of China(2024YFE0208600)New Energy Joint Laboratory of China Southern Power Grid Corporation(GDXNY2024KF03)+2 种基金the National Natural Science Foundation of China(Grant No.U24B2090)National Key R&D Program(No.2022YFB4201300)Science and Technology Project of Huaneng Group(HNKJ24-H78).
文摘The jacket structure and transition piece comprise the supporting structure of a bottom-fixed offshore wind turbine(OWT)connected to the steel tower,which determines the overall structural dynamic performance of the entire OWT.Ideally,optimal performance can be realized by effectively coordinating two components,notwithstanding their separate design processes.In pursuit of this objective,this paper proposes a concurrent design methodology for the jacket structure and transition piece by exploiting topology optimization(TO).The TO for a three-legged jacket foundation is formulated by minimizing static compliance.In contrast to conventional TO,two separated volume fractions are imposed upon the structural design domain of the jacket structure and transition piece to ensure continuity.A 5 MW(megawatt)OWT supported by a four-legged or three-legged jacket substructure is under investigation.The external loads are derived from various design load cases that are acquired using the commercial software platform DNV Bladed(Det Norske Veritas).Through a comparative analysis of the fundamental frequency and maximum nodal deformation,it was found that the optimized solution demonstrates a reduced weight and superior stiffness.The findings demonstrate the present concurrent design approach using TO can yield significant benefits by reducing the overall design cycle and enhancing the feasibility of the final design.
文摘On the stage of China Media Group’s 2025 Spring Festival Gala,more than a dozen humanoid robots dressed in floral padded jackets danced alongside human counterparts in a creative folk dance performance.The robots not only smoothly twisted their waists and mimicked human leg-kicking movements,but also spun handkerchiefs,displaying extremely dexterous moves and exceptional skills.
文摘This study investigates the seismic response mitigation of an offshore jacket platform via a novel damping system,the bidirectional tuned liquid column gas damper(BTLCGD).To efficiently model the complex platform structure,an equivalent single degree of freedom approach was employed.Since the mass contribution of the first mode of the platform is more than 90%,this simplification significantly reduces the computational burden while maintaining accuracy.Therefore,this structure was modeled and analyzed on a scale of 1 to 36 using the Froudian law.To address the limitations of conventional tuned liquid column gas dampers(TLCGDs),which are susceptible to the directionality of seismic excitations,BTLCGD was proposed.This innovative damper is designed to operate effectively in two orthogonal directions,thereby improving seismic performance.Through numerical simulations,the performance of both TLCGD and BTLCGD was evaluated under seismic loading.The results demonstrated that BTLCGD significantly outperforms TLCGD in terms of reducing structural responses,particularly in the direction where TLCGD is ineffective.Furthermore,BTLCGD offers advantages in terms of installation and space requirements.The results of this research offer valuable perspectives into the design and implementation of effective damping systems for offshore structures,contributing to enhanced structural integrity and safety.
基金The Program for Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China (NoIRT0518)
文摘In order to study the effectiveness of combined carbon fiber-reinforced polymer （CFRP） sheets and steel jacket in strengthening the seismic performance of corrosion-damaged reinforced concrete （RC） columns, twelve reinforced concrete columns are tested under combined lateral cyclic displacement excursions and constant axial load. The variables studied in this program include effects of corrosion degree of the rebars, level of axial load, the amount of CFRP sheets and steel jacket. The results indicate that the combined CFRP and steel jacket retrofitting technique is effective in improving load-carrying, ductility and energy absorption capacity of the columns. Compared with the corrosion-damaged RC column, the lateral load and the ductility factor of many strengthened columns increase more than 90% and 100%, respectively. The formulae for the calculation of the yielding load, the maximum lateral load and the displacement ductility factor of the strengthened columns under combined constant axial load and cyclically increasing lateral loading are developed. The test results are also compared with the results obtained from the proposed formulae. A good agreement between calculated values and experimental results is observed.
基金Supported by the Speciai Pogram forLocal Universities Development of Central Finance of China （2050205）, the National Natural Science Foundation of China （21106086）, and the Program for Liaoning Excellent Talents in University （LJQ2012035）.
文摘Laminar flow and heat transfer characteristics of jacketed vessel with triangular flow channels were numerically studied under hydrodynamically and thermally fully developed conditions. Constant heat flux at theheated wall was assumed. The numerical program code interms of vorticity, stream function, axial velocity com ponent and energy equations was written based on a finite volume method. Based on the numerical results, the flow and temperature field were given, and the effects of Dean and Prandtl numbers on flow and heat transfer were ex amined, and the correlations of flow resistance and mean Nusselt number were developed for the jacket. The results show that the structure of secondary flow is steady two vortices in the investigated range of dimensionless curvatureratio and Reynolds number. Two peaks of local Nusselt number increase significantly with Prandtl and Dean num ber increasing, but the local Nusselt numbers near two ends and at the center of the heated wall increase only slightly. The center and two ends of heated wall are the poor positions for heat transfer in the jacket. Compared with the outer half coil jacket at the same area of heated wall, curvature radius, Reynolds number and Prandtl number, e jacket of triangular flow chmnel has lower flow resistance and less mean Nusselt number.
