The plant design management system （PDMS） is an integrated application which includes a database and is useful when designing complex 3-D industrial projects. It could be used to simplify the most difficult part of ...The plant design management system （PDMS） is an integrated application which includes a database and is useful when designing complex 3-D industrial projects. It could be used to simplify the most difficult part of a subsea oil extraction project-detailed pipeline design. It could also be used to integrate the design of equipment, structures, HVAC, E-ways as well as the detailed designs of other specialists. This article mainly examines the applicability of the Vantage PDMS database to pipeline projects involving jack-up drilling ships. It discusses the catalogue （CATA） of the pipeline, the spec-world （SPWL） of the pipeline, the bolt tables （BLTA） and so on. This article explains the main methods for CATA construction as well as problem in the process of construction. In this article, the authors point out matters needing attention when using the Vantage PDMS database in the design process and discuss partial solutions to these questions.展开更多
Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking system beating capacity, pre-load requirements, spud can beating capacity and overturning stability is s...Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking system beating capacity, pre-load requirements, spud can beating capacity and overturning stability is suggested in this paper. As an example, a jack-up with truss legs is analyzed by finite element analysis method. This paper may be helpful to the rig owners, operators and designers.展开更多
A jack-up platform, with its particular structure, showed obvious dynamic characteristics under complex environmental loads in extreme conditions. In this paper, taking a simplified 3-D finite element dynamic model in...A jack-up platform, with its particular structure, showed obvious dynamic characteristics under complex environmental loads in extreme conditions. In this paper, taking a simplified 3-D finite element dynamic model in extreme storm conditions as research object, a transient dynamic analysis method was proposed, which was under both regular and irregular wave loads. The steps of dynamic analysis under extreme conditions were illustrated with an applied case, and the dynamic amplification factor （DAF） was calculated for each response parameter of base shear, overturning moment and hull sway. Finally, the structural response results of dynamic and static were compared and analyzed. The results indicated that the static strength analysis of the Jack-up Platforms was not enough under the dynamic loads including wave and current, further dynamic response analysis considering both computational efficiency and accuracy was necessary.展开更多
As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of th...As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of the areas of significant development has been the modelling of spudean performance, where the load-displacement behaviour of the foundation is required to be included in any numerical model of the structure. In this study, beam on nonlinear winkler foundation （BNWF） modeling--which is based on using nonlinear springs and dampers instead of a continuum soil media--is employed for this purpose. A regular monochrome design wave and an irregular wave representing a design sea state are applied to the platform as lateral loading. By using the BNWF model and assuming a granular soil under spudcans, properties such as soil nonlinear behaviour near the structure, contact phenomena at the interface of soil and spudcan （such as uplifting and rocking）, and geometrical nonlinear behaviour of the structure are studied. Results of this study show that inelastic behaviour of the soil causes an increase in the lateral displacement at the hull elevation and permanent unequal settlement in soil below the spudcans, which are increased by decreasing the friction angle of the sandy soil. In fact, spudeans and the underlying soil cause a relative fixity at the platform support, which changes the dynamic response of the structure compared with the case where the structure is assumed to have a fixed support or pinned support. For simulating this behaviour without explicit modelling of soil-structure interaction （SSI）, moment- rotation curves at the end of platform legs, which are dependent on foundation dimensions and soil characteristics, are obtained. These curves can be used in a simplified model of the platform for considering the relative fixity at the soil- foundation interface.展开更多
The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is propose...The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan.展开更多
Jack-up units are extensively playing a successful role in drilling engineering around the world, and their safety and efficiency take more and more attraction in both research and engineering practice. An accurate pr...Jack-up units are extensively playing a successful role in drilling engineering around the world, and their safety and efficiency take more and more attraction in both research and engineering practice. An accurate prediction of the spudcan penetration depth is quite instrumental in deciding on whether a jack-up unit is feasible to operate at the site. The prediction of a too large penetration depth may lead to the hesitation or even rejection of a site due to potential difficulties in the subsequent extraction process; the same is true of a too small depth prediction due to the problem of possible instability during operation. However, a deviation between predictive results and final field data usually exists, especially when a strong-over-soft soil is included in the strata. The ultimate decision sometimes to a great extent depends on the practical experience, not the predictive results given by the guideline. It is somewhat risky, but no choice. Therefore, a feasible predictive method for the spudcan penetration depth, especially in strata with strong-over-soft soil profile, is urgently needed by the jack-up industry. In view of this, a comprehensive investigation on methods of predicting spudcan penetration is executed. For types of different soil profiles, predictive methods for spudcan penetration depth are proposed, and the corresponding experiment is also conducted to validate these methods. In addition, to further verify the feasibility of the proposed methods, a practical engineering case encountered in the South China Sea is also presented, and the corresponding numerical and experimental results are also presented and discussed.展开更多
The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at ...The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at home and abroad in structural analyses for truss jack-up rig legs, this paper introduces a new calculation model which is more reasonable. This model can simulate better the load situation of a rig reflecting more precisely the effects of the leg loads caused by the spring support of gearboxes of the jacking system and the secondary bending moment raised by hull displacement under extreme conditions. The rig conversion was completed in 1989. In July 1991 the rig safely stood the frontal hitting of Typhoon with the wind speed of 52 m / s, which shows that the checking on the structure is correct.展开更多
The uplift resistance calculation is an important basis for the construction decisions of the jack-up wind installation vessel and the design of the jacking system,and determines the operation risk and reliability in ...The uplift resistance calculation is an important basis for the construction decisions of the jack-up wind installation vessel and the design of the jacking system,and determines the operation risk and reliability in the installation process of the wind turbine. The influence factors of the pile shoe's penetration depth and uplift resistance are analyzed,and the calculation model and flow of the uplift resistance are given. Based on a construction example,the influence rules are analyzed for the change of the pile shoe's structural parameters on the penetration depth and uplift resistance.The analysis results show that the penetration depth is more sensitive to the width of the pile shoe,and the height has greater influence on the uplift resistance than the length and width of the spud. With the increase of the height,the uplift resistance may increase rapidly.Although the decreases of the length,width and height of the pile shoe may reduce the uplift resistance,the penetration depth may increase in the meantime. This will increase the pulling pile time and reduce the construction efficiency. So the parameters of the pile shoe should be optimized according to the adaptable geology condition so as to obtain the optimal uplift resistance and working efficiency.展开更多
The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical re...The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical reference which can evaluate the jack-up's drilling ability, design the cantilever structure and instruct a jack-up manager to make the operations safe. The intent of this paper is to explore the interrelationships between the cantilever position, drilling floor and the loads including wind force, the stand set-back weight etc., through analyzing the structure and load characteristics of the x-type cantilever and the simplified mechanics model with the restriction of the maximum moment capacity of the cantilever single side beam. Referring to several typical position designs load values, the cantilever allowable load nephogram is obtained by using the suitable interpolation method. The paper gives a method for cantilever allowable load design, which is proved reliable and effective by the calculation example.展开更多
The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for ...The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for calculating the wind load. However, the calculated results are conservative and not good for structure optimization design. In this paper, a 400 ft jack-up is studied as an example. Based on the wind tunnel test and numerical simulation method, some key points of wind load calculation, such as shielding effect, lift effect and shape coefficient of component, are discussed. The study shows that the points mentioned above, which are ignored in the MODU rule calculation, result in the conservative result.展开更多
In the leg-lowering process,the offshore jack-up platform is in a floating state,and the spudcan may collide with the seabed due to the platform motion in waves,thereby threatening the safety and stability of the plat...In the leg-lowering process,the offshore jack-up platform is in a floating state,and the spudcan may collide with the seabed due to the platform motion in waves,thereby threatening the safety and stability of the platform.This paper first analyzed the hydrodynamic response of a jack-up platform under different sea states.Then a finite-element model was established which considered the material and geometrical nonlinearity in the structure and the nonlinear interaction between soil and structure to investigate the collision response between the spudcan and seabed during lowering jack-up legs.The results show that the dynamic response of the platform decreases and gradually tends to be stable as the wave period increases.The motion response of the platform reach the largest value when the wave period is 8 s and the wave direction is 0°.The collision angle between the spudcan and seabed has a large influence on the collision response,while the velocity of leg-lowering has little influence on the collision response.The collision response is also significantly affected by soil conditions.For clay,the increase in undrained shear strength and Young’s modulus will increase the impact force.展开更多
The jack-up unit is one of the best drilling platforms in offshore oil fields with water depth shallower than 150 meters.As the most pivotal component of the jack-up unit,the leg system can directly affect the global ...The jack-up unit is one of the best drilling platforms in offshore oil fields with water depth shallower than 150 meters.As the most pivotal component of the jack-up unit,the leg system can directly affect the global performance of a jack-up unit.Investigation shows that there are three kinds of leg structure forms in the world now:the reverse K,X,and mixing types.In order to clarify the advantage and defects of each one,as well as their effect on the global performance of the jack-up unit,this paper commenced to study performance targets ofa deepwater jack-up unit with different leg systems(X type,reverse K type,and mixing type).In this paper a typical leg scantling dimension and identical external loads were selected,detailed finite element snalysis(FEA)models were built to simulate the jack-up unit's structural behavior,and the multi-point constraint(MPC)element together with the spring element was used to deal with the boundary condition.Finally,the above problems were solved by comparative analysis of their main performance targets(including ultimate static strength,dynamic response,and weight).展开更多
Nowadays,the demand for using jack-up platforms to carry out a large percentage of deep-water oil and gas exploration is steadily increasing.The response of jack-up platforms to the severe dynamic loads that may be en...Nowadays,the demand for using jack-up platforms to carry out a large percentage of deep-water oil and gas exploration is steadily increasing.The response of jack-up platforms to the severe dynamic loads that may be encountered during the structure life is not examined enough.Therefore,this study attempts to investigate the response of jack-up platforms performance under the effect of dynamic loads due to wave,wind,earthquake and tsunami forces using the finite element method for two models with the lowest and highest hull elevations.The jack-up platform is located in the Gulf of Mexico.Earthquake ac-celerations are applied to the model in high and moderate seismic levels.In addition,tsunami waves are applied to the platform in three different directions at 0°,45°and 90°.This study utilised Airy’s linear wave approach to assess the surface elevations and wave kinematics.The reference wind velocity is 10 knots at 10 m over the mean water level.Results indicate that the dynamic response of the structure is affected by the height of the platform and by the increase of the platform hull elevation.The combination of the El-Centro earthquake,dead and live loads provides the major impact on the platform at the lowest(70 m)and highest(85 m)hull elevations.The comparison of all result proves that the jack-up platform hull under high earthquake intensity and tsunami waves with 45°has experienced maximum deforma-tion.Moreover,raising the deck will increase the response of the dynamic load and displacements but will negatively affect the platform.展开更多
The structural failures of jack-up rigs were mostly found in leg structures,due to cracks in way of connections between tubular members of leg structures.Although,stress calculations of leg structures can be made by u...The structural failures of jack-up rigs were mostly found in leg structures,due to cracks in way of connections between tubular members of leg structures.Although,stress calculations of leg structures can be made by using“finite element techniques”,it takes a lot of time to complete the calculations for the full cases of all working conditions because of many tubular members.Therefore,a simple method for the stress calculations for design purposes is strongly desired.This paper desribes a simple stress calculaiton method of leg structures and shows a satisfactory results as compared with the results obtained by a detailed calculation method.展开更多
文摘The plant design management system （PDMS） is an integrated application which includes a database and is useful when designing complex 3-D industrial projects. It could be used to simplify the most difficult part of a subsea oil extraction project-detailed pipeline design. It could also be used to integrate the design of equipment, structures, HVAC, E-ways as well as the detailed designs of other specialists. This article mainly examines the applicability of the Vantage PDMS database to pipeline projects involving jack-up drilling ships. It discusses the catalogue （CATA） of the pipeline, the spec-world （SPWL） of the pipeline, the bolt tables （BLTA） and so on. This article explains the main methods for CATA construction as well as problem in the process of construction. In this article, the authors point out matters needing attention when using the Vantage PDMS database in the design process and discuss partial solutions to these questions.
文摘Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking system beating capacity, pre-load requirements, spud can beating capacity and overturning stability is suggested in this paper. As an example, a jack-up with truss legs is analyzed by finite element analysis method. This paper may be helpful to the rig owners, operators and designers.
基金Supported by the National Natural Science Foundation of China （Grant No.51079034） Fundamental Research Funds for the Central Universities （Grant No. HEUCFRI003）.
文摘A jack-up platform, with its particular structure, showed obvious dynamic characteristics under complex environmental loads in extreme conditions. In this paper, taking a simplified 3-D finite element dynamic model in extreme storm conditions as research object, a transient dynamic analysis method was proposed, which was under both regular and irregular wave loads. The steps of dynamic analysis under extreme conditions were illustrated with an applied case, and the dynamic amplification factor （DAF） was calculated for each response parameter of base shear, overturning moment and hull sway. Finally, the structural response results of dynamic and static were compared and analyzed. The results indicated that the static strength analysis of the Jack-up Platforms was not enough under the dynamic loads including wave and current, further dynamic response analysis considering both computational efficiency and accuracy was necessary.
文摘As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of the areas of significant development has been the modelling of spudean performance, where the load-displacement behaviour of the foundation is required to be included in any numerical model of the structure. In this study, beam on nonlinear winkler foundation （BNWF） modeling--which is based on using nonlinear springs and dampers instead of a continuum soil media--is employed for this purpose. A regular monochrome design wave and an irregular wave representing a design sea state are applied to the platform as lateral loading. By using the BNWF model and assuming a granular soil under spudcans, properties such as soil nonlinear behaviour near the structure, contact phenomena at the interface of soil and spudcan （such as uplifting and rocking）, and geometrical nonlinear behaviour of the structure are studied. Results of this study show that inelastic behaviour of the soil causes an increase in the lateral displacement at the hull elevation and permanent unequal settlement in soil below the spudcans, which are increased by decreasing the friction angle of the sandy soil. In fact, spudeans and the underlying soil cause a relative fixity at the platform support, which changes the dynamic response of the structure compared with the case where the structure is assumed to have a fixed support or pinned support. For simulating this behaviour without explicit modelling of soil-structure interaction （SSI）, moment- rotation curves at the end of platform legs, which are dependent on foundation dimensions and soil characteristics, are obtained. These curves can be used in a simplified model of the platform for considering the relative fixity at the soil- foundation interface.
基金financially supported by the Postgraduate Research & Practice Innovation Program of Jiangsu Province(Grant No.KYCX18_2311)
文摘The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan.
基金supported by the National High Technology Research and Development Program of China(863 Program,Grant No.2008AA092701-3)
文摘Jack-up units are extensively playing a successful role in drilling engineering around the world, and their safety and efficiency take more and more attraction in both research and engineering practice. An accurate prediction of the spudcan penetration depth is quite instrumental in deciding on whether a jack-up unit is feasible to operate at the site. The prediction of a too large penetration depth may lead to the hesitation or even rejection of a site due to potential difficulties in the subsequent extraction process; the same is true of a too small depth prediction due to the problem of possible instability during operation. However, a deviation between predictive results and final field data usually exists, especially when a strong-over-soft soil is included in the strata. The ultimate decision sometimes to a great extent depends on the practical experience, not the predictive results given by the guideline. It is somewhat risky, but no choice. Therefore, a feasible predictive method for the spudcan penetration depth, especially in strata with strong-over-soft soil profile, is urgently needed by the jack-up industry. In view of this, a comprehensive investigation on methods of predicting spudcan penetration is executed. For types of different soil profiles, predictive methods for spudcan penetration depth are proposed, and the corresponding experiment is also conducted to validate these methods. In addition, to further verify the feasibility of the proposed methods, a practical engineering case encountered in the South China Sea is also presented, and the corresponding numerical and experimental results are also presented and discussed.
文摘The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at home and abroad in structural analyses for truss jack-up rig legs, this paper introduces a new calculation model which is more reasonable. This model can simulate better the load situation of a rig reflecting more precisely the effects of the leg loads caused by the spring support of gearboxes of the jacking system and the secondary bending moment raised by hull displacement under extreme conditions. The rig conversion was completed in 1989. In July 1991 the rig safely stood the frontal hitting of Typhoon with the wind speed of 52 m / s, which shows that the checking on the structure is correct.
基金Department of Transportation Technology of Construction Project,China(No.2013328225080)Natural Science Foundation of Liaoning Province,China(No.2015020121)the Fundamental Research Funds for the Central Universities,China(Nos.3132015087,3132014303)
文摘The uplift resistance calculation is an important basis for the construction decisions of the jack-up wind installation vessel and the design of the jacking system,and determines the operation risk and reliability in the installation process of the wind turbine. The influence factors of the pile shoe's penetration depth and uplift resistance are analyzed,and the calculation model and flow of the uplift resistance are given. Based on a construction example,the influence rules are analyzed for the change of the pile shoe's structural parameters on the penetration depth and uplift resistance.The analysis results show that the penetration depth is more sensitive to the width of the pile shoe,and the height has greater influence on the uplift resistance than the length and width of the spud. With the increase of the height,the uplift resistance may increase rapidly.Although the decreases of the length,width and height of the pile shoe may reduce the uplift resistance,the penetration depth may increase in the meantime. This will increase the pulling pile time and reduce the construction efficiency. So the parameters of the pile shoe should be optimized according to the adaptable geology condition so as to obtain the optimal uplift resistance and working efficiency.
文摘The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical reference which can evaluate the jack-up's drilling ability, design the cantilever structure and instruct a jack-up manager to make the operations safe. The intent of this paper is to explore the interrelationships between the cantilever position, drilling floor and the loads including wind force, the stand set-back weight etc., through analyzing the structure and load characteristics of the x-type cantilever and the simplified mechanics model with the restriction of the maximum moment capacity of the cantilever single side beam. Referring to several typical position designs load values, the cantilever allowable load nephogram is obtained by using the suitable interpolation method. The paper gives a method for cantilever allowable load design, which is proved reliable and effective by the calculation example.
基金supported by the National Natural Science Foundation of China(Grant No.51079034)the Fundamental Research Funds for the Central Universities(Grant No.HEUCFR1003)
文摘The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for calculating the wind load. However, the calculated results are conservative and not good for structure optimization design. In this paper, a 400 ft jack-up is studied as an example. Based on the wind tunnel test and numerical simulation method, some key points of wind load calculation, such as shielding effect, lift effect and shape coefficient of component, are discussed. The study shows that the points mentioned above, which are ignored in the MODU rule calculation, result in the conservative result.
基金financially supported by the National Natural Science Foundation of China(Grant No.51779171)the Tianjin Municipal Natural Science Foundation(Grant No.18JCYBJC22800)。
文摘In the leg-lowering process,the offshore jack-up platform is in a floating state,and the spudcan may collide with the seabed due to the platform motion in waves,thereby threatening the safety and stability of the platform.This paper first analyzed the hydrodynamic response of a jack-up platform under different sea states.Then a finite-element model was established which considered the material and geometrical nonlinearity in the structure and the nonlinear interaction between soil and structure to investigate the collision response between the spudcan and seabed during lowering jack-up legs.The results show that the dynamic response of the platform decreases and gradually tends to be stable as the wave period increases.The motion response of the platform reach the largest value when the wave period is 8 s and the wave direction is 0°.The collision angle between the spudcan and seabed has a large influence on the collision response,while the velocity of leg-lowering has little influence on the collision response.The collision response is also significantly affected by soil conditions.For clay,the increase in undrained shear strength and Young’s modulus will increase the impact force.
文摘The jack-up unit is one of the best drilling platforms in offshore oil fields with water depth shallower than 150 meters.As the most pivotal component of the jack-up unit,the leg system can directly affect the global performance of a jack-up unit.Investigation shows that there are three kinds of leg structure forms in the world now:the reverse K,X,and mixing types.In order to clarify the advantage and defects of each one,as well as their effect on the global performance of the jack-up unit,this paper commenced to study performance targets ofa deepwater jack-up unit with different leg systems(X type,reverse K type,and mixing type).In this paper a typical leg scantling dimension and identical external loads were selected,detailed finite element snalysis(FEA)models were built to simulate the jack-up unit's structural behavior,and the multi-point constraint(MPC)element together with the spring element was used to deal with the boundary condition.Finally,the above problems were solved by comparative analysis of their main performance targets(including ultimate static strength,dynamic response,and weight).
文摘Nowadays,the demand for using jack-up platforms to carry out a large percentage of deep-water oil and gas exploration is steadily increasing.The response of jack-up platforms to the severe dynamic loads that may be encountered during the structure life is not examined enough.Therefore,this study attempts to investigate the response of jack-up platforms performance under the effect of dynamic loads due to wave,wind,earthquake and tsunami forces using the finite element method for two models with the lowest and highest hull elevations.The jack-up platform is located in the Gulf of Mexico.Earthquake ac-celerations are applied to the model in high and moderate seismic levels.In addition,tsunami waves are applied to the platform in three different directions at 0°,45°and 90°.This study utilised Airy’s linear wave approach to assess the surface elevations and wave kinematics.The reference wind velocity is 10 knots at 10 m over the mean water level.Results indicate that the dynamic response of the structure is affected by the height of the platform and by the increase of the platform hull elevation.The combination of the El-Centro earthquake,dead and live loads provides the major impact on the platform at the lowest(70 m)and highest(85 m)hull elevations.The comparison of all result proves that the jack-up platform hull under high earthquake intensity and tsunami waves with 45°has experienced maximum deforma-tion.Moreover,raising the deck will increase the response of the dynamic load and displacements but will negatively affect the platform.
文摘The structural failures of jack-up rigs were mostly found in leg structures,due to cracks in way of connections between tubular members of leg structures.Although,stress calculations of leg structures can be made by using“finite element techniques”,it takes a lot of time to complete the calculations for the full cases of all working conditions because of many tubular members.Therefore,a simple method for the stress calculations for design purposes is strongly desired.This paper desribes a simple stress calculaiton method of leg structures and shows a satisfactory results as compared with the results obtained by a detailed calculation method.
