This study investigates the potential of Prosopis cineraria Leaves Powder(PCLP)as a biosorbent for removing lead(Pb)and zinc(Zn)from aqueous solutions,optimizing the process using Response Surface Methodology(RSM).Pro...This study investigates the potential of Prosopis cineraria Leaves Powder(PCLP)as a biosorbent for removing lead(Pb)and zinc(Zn)from aqueous solutions,optimizing the process using Response Surface Methodology(RSM).Prosopis cineraria,commonly known as Khejri,is a drought-resistant tree with significant promise in environmental applications.The research employed a Central Composite Design(CCD)to examine the independent and combined effects of key process variables,including initial metal ion concentration,contact time,pH,and PCLP dosage.RSM was used to develop mathematical models that explain the relationship between these factors and the efficiency of metal removal,allowing the determination of optimal operating conditions.The experimental results indicated that the Langmuir isotherm model was the most appropriate for describing the biosorption of both metals,suggesting favorable adsorption characteristics.Additionally,the D-R isotherm confirmed that chemisorption was the primary mechanism involved in the biosorption process.For lead removal,the optimal conditions were found to be 312.23 K temperature,pH 4.72,58.5 mg L-1 initial concentration,and 0.27 g biosorbent dosage,achieving an 83.77%removal efficiency.For zinc,the optimal conditions were 312.4 K,pH 5.86,53.07 mg L-1 initial concentration,and the same biosorbent dosage,resulting in a 75.86%removal efficiency.These findings highlight PCLP’s potential as an effective,eco-friendly biosorbent for sustainable heavy metal removal in water treatment.展开更多
The transformation mechanism of the inclusions and microstructure in 316L stainless steel after post-isothermal heat treatment(IHT)was revealed,along with the pitting behavior of the inclusions in a chloride environme...The transformation mechanism of the inclusions and microstructure in 316L stainless steel after post-isothermal heat treatment(IHT)was revealed,along with the pitting behavior of the inclusions in a chloride environment before and after the transformation.The effect of the inclusion transformation on the pitting corrosion behavior of 316L stainless steel and its intrinsic mechanism was also revealed.Results revealed a gradual transformation of MnO-SiO_(2)inclusions into MnO-Cr_(2)O_(3) within the temperature range of 1373 to 1573 K.MnO-Cr_(2)O_(3)inclusions exhibited minimal dissolution in chloride ion corrosion environments,while MnO-SiO_(2)oxides demonstrated higher electrochemical activity and were more prone to dissolve and form pits.Meanwhile,IHT significantly reduced the dislocation density of stainless steel,rendering it more stable in corrosive environments.X-ray photoelectron spectroscopy peak distributions of the passive films demonstrated that IHT increased the proportion of Cr and Fe oxides and hydroxides in the passive film which improved the stability and corrosion resistance of the steel.展开更多
Block copolymer(BCP) nanolithography offers potential beyond traditional photolithographic limits, yet reliably producing low-defect, perpendicular domains remains challenging. We introduce a microenvironmentdriven is...Block copolymer(BCP) nanolithography offers potential beyond traditional photolithographic limits, yet reliably producing low-defect, perpendicular domains remains challenging. We introduce a microenvironmentdriven isothermal annealing method for directed self-assembly of BCP thin films. By annealing films at stable temperature in a quasi-sealed, inert-gas chamber, our approach promotes highly uniform perpendicular lamellar nanopatterns over large areas, effectively mitigating environmental fluctuations and emulating solvent-vapor annealing without solvent exposure. Resulting BCP structures demonstrate enhanced spatial coherence and notably low defect density. Furthermore, we successfully transfer these nanopatterns into precise metal nano-line arrays,confirming the method's capability for high-fidelity pattern replication. This scalable, solvent-free technique provides a robust, reliable route for high-resolution nanopatterning in advanced semiconductor manufacturing.展开更多
Phosphoric acid is a key ingredient in fertilizer production and contains many rare earth elements(REEs).Recovering REEs from phosphoric acid can prevent the accumulation of these elements in the soil and help bridge ...Phosphoric acid is a key ingredient in fertilizer production and contains many rare earth elements(REEs).Recovering REEs from phosphoric acid can prevent the accumulation of these elements in the soil and help bridge the gap between supply and demand.In this concern,a new material called Si-6G PAMAMPPAAM dendrimers modified silica gel terminated with phenylphosphonic acid-amide moieties was developed and its ability to adsorb Nd(Ⅲ)and Er(Ⅲ)from the phosphoric acid solution was investigated.K inetics and isotherm of the uptake process were investigated to explo re the so rption characte ristics.The attained results show that both metal ions exhibit the same adsorption performance,and the uptake process is depicted as a chemisorption,monolayer,uniform,and homogeneous process.The equilibrium state is achieved within 120 min,and the maximum uptake capacity is 16.7 mg Nd(Ⅲ)/g,and 14.0 mg Er(Ⅲ)/g.Sorption thermodynamics is an endothermic,spontaneous,and feasible uptake process.Nitric acid(1.0 mol/L)is found to be efficient for adsorbing about 94.3%and 92.5%of neodymium(Ⅲ)and erbium(Ⅲ)respectively,and the prepared Si-6G PAMAM-PPAAM demonstrates excellent stability over five consecutive sorption/desorption cycles.Preliminary tests on commercial phosphoric acid demonstrate that Si-6G PAMAM-PPAAM retains its effective REEs uptake from a complex comm ercial phosph oric acid solution.展开更多
Silicomanganese dust contains large amounts of valuables,such as Si and Mn,which can be used as raw materials for the smelting of silicomanganese.However,the direct addition of dust to the submerged arc furnace can in...Silicomanganese dust contains large amounts of valuables,such as Si and Mn,which can be used as raw materials for the smelting of silicomanganese.However,the direct addition of dust to the submerged arc furnace can influence the permeability of burden due to the fine particle size of dust,which results in incomplete reduction reactions during the smelting process.In this paper,silicomanganese dust,graphite powder,and other additives were pressed to form carbon-containing dust briquettes,and the self-reduction process of the dust briquettes was investigated through the isothermal thermogravimetric method with different carbon–oxygen (C/O) molar ratios,contents of fluxing agents,and reduction temperatures.Various reduction kinetic models for dust briquettes at different temperatures were established.The results show that the reaction fraction of the dust briquettes was about 90%at a C/O molar ratio of 1.2 with optimal reduction efficiency.The addition of CaF_(2)contributed to the decrease in the melting point and viscosity of dust briquettes,which increased their reduction rate.As the reduction temperature increased,the reduction rate of dust briquettes increased.The reduction reaction rate of dust briquettes was controlled through gas-phase diffusion.Meanwhile,their reduction process was analyzed kinetically,with the reaction time of 5 min as the dividing line.The apparent activation energies for the two diffusion stages were 56.10 and 100.52 kJ/mol,respectively.The kinetic equations are expressed as[1-(1-f)^(1/3)]^(2)=0.69e^(-56100/(RT))t and [1-(1-f)^(1/3)]^(2)=2.06e^(-100520/(RT))t.展开更多
Semicrystalline polymers usually undergo multilevel microstructural evolutions with annealing and stretching processes,which is es-sential to tailor the physical properties of the polymer.Here,poly(butylene carbonate)...Semicrystalline polymers usually undergo multilevel microstructural evolutions with annealing and stretching processes,which is es-sential to tailor the physical properties of the polymer.Here,poly(butylene carbonate)(PBC)sheets were prepared via isothermal annealing and unidirectional pre-stretching processes,then the changes of PBC in crystallinity,mechanical properties,thermal properties and microscopic changes before and after annealing and stretching were measured,as well as the relationship between microstructure and macroscopic proper-ties before and after stretching.The strengthening mechanism of PBC was also described.It was demonstrated that shish-kabab structure emerged under the pre-stretching process.With the increase of the tensile ratio,the crystallinity,structure and mechanical properties are in-creased differently.Among them,the crystallinity and tensile strength after annealing-stretching treatment increased to 24.45%and 104.5 MPa,respectively,which were about 1.55 times and 3.4 times of those-without any treatment.展开更多
The factors affecting the oxidation degree of vanadium–titanium magnetite (VTM) pellets were analyzed via the isothermal oxidation experiment. Furthermore, the oxidation kinetics of VTM pellets were explored through ...The factors affecting the oxidation degree of vanadium–titanium magnetite (VTM) pellets were analyzed via the isothermal oxidation experiment. Furthermore, the oxidation kinetics of VTM pellets were explored through linear fitting to the kinetic equations based on the shrinking unreacted-core model. The results reveal that VTM pellets undergo oxidation in three distinct phases: pre-oxidation, mid-oxidation, and final stable phase. Notably, the mid-oxidation phase is absent in magnetite oxidation. The shrinking unreacted-core model has been proven to be suitable for modeling the process of oxidizing VTM pellets. In the pre-oxidation stage, the rate-controlling step is determined by both the oxidation temperature and the effective oxygen concentration. The influence of the effective oxygen concentration on the rate of oxidation is more pronounced at temperatures between 1073 and 1273 K, especially when the oxygen content falls below 15 vol.%. For the production of oxidized VTM pellets, it is necessary to maintain a preheating temperature above 1173 K (to accelerate the oxidation reaction) and below 1473 K (to prevent the swift formation of compact Fe2TiO5 at the shell of the pellet) in an oxygen-enriched atmosphere.展开更多
The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was a...The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was analyzed using the first-order irreversible reaction,following the shrinking unreacted nucleus model.The results demonstrate that VTM pellets prepared with 3Co-binder exhibit a faster oxidation rate than those with F-binder across the temperatures ranging from 1073 to 1473 K.In both cases,the oxidation process was controlled by an interfacial chemical reaction during the pre-oxidation stage and by internal diffusion during the mid-oxidation stage.The type of binder did not influence the primary oxidation control mechanism of the VTM pellets.However,the apparent rate constants in the pre-oxidation stage and the internal diffusion coefficients in the mid-oxidation stage were higher for pellets with 3Co-binder compared to those with F-binder.The apparent activation energies for the 3Co-binder pellets were similar to those of bentonite,indicating favorable kinetic conditions without negative impacts on the oxidation process.Nonetheless,it is important to note that pellets with F-binder required a longer oxidation time than those with 3Co-binder.展开更多
[Objectives]To develop methods for the early and rapid detection of tomato gray mold.[Methods]Utilizing the ACTIN gene of Botrytis cinerea as the target,a set of specific primers for loop-mediated isothermal amplifica...[Objectives]To develop methods for the early and rapid detection of tomato gray mold.[Methods]Utilizing the ACTIN gene of Botrytis cinerea as the target,a set of specific primers for loop-mediated isothermal amplification(LAMP)was designed and screened.Subsequently,the reaction system and conditions were optimized to achieve rapid isothermal amplification of B.cinerea.[Results]Through agarose gel electrophoresis and SYBR GreenⅠvisualization analysis,the optimal dosages of BstⅡDNA polymerase and dNTPs,as well as the optimal ratio of internal to external primers,were determined to be 0.6 U/μL,1.25 mmol/L,and 2:1,respectively.The specific detection of B.cinerea was accomplished at 61℃ for 40 min,achieving a sensitivity of 100 ag/μL,which is 106 times greater than that of conventional PCR detection.When this method was applied to the detection of tomato diseases,the detection limit for B.cinerea spores reached 20 spores/mL.Furthermore,the pathogen was detectable in tomato leaves that had been infected for 4 d,despite the absence of visible phenotypic symptoms of gray mold.[Conclusions]This method is suitable for the early,rapid,sensitive,and visual detection of tomato gray mold,thereby offering technical support for its early diagnosis,prevention,and control.展开更多
The microstructural evolution of AZ61 magnesium alloy predeformed by equal channel angular extrusion（ECAE） during semisolid isothermal treatment（SSIT） was investigated by means of optical metalloscopy and image an...The microstructural evolution of AZ61 magnesium alloy predeformed by equal channel angular extrusion（ECAE） during semisolid isothermal treatment（SSIT） was investigated by means of optical metalloscopy and image analysis equipment.The process involved application of ECAE to as-cast alloy at 310 ℃ to induce strain prior to heating in the semisolid region for different time lengths.The results show that extrusion pass,isothermal temperature and processing route have an influence on microstructural evolution of predeformed AZ61 magnesium alloy during SSIT.With the increase of extrusion pass,the solid particle size is reduced gradually.When isothermal temperature increases from 530 ℃ to 560 ℃,the average particle size increases from 22 μm to 35 μm.When isothermal temperature is 575 ℃,the average particle size decreases.The particle size of microstructure of AZ61 magnesium alloy predeformed by ECAE at BC during SSIT is the finest.展开更多
A Mg-8%Al-1%Si alloy with semisolid microstructure was fabricated by isothermal heat treatment process. The effects of isothermal process parameters such as holding temperature and holding time on the microstructure o...A Mg-8%Al-1%Si alloy with semisolid microstructure was fabricated by isothermal heat treatment process. The effects of isothermal process parameters such as holding temperature and holding time on the microstructure of Mg-8%Al-1%Si alloy were investigated. The results show that a non-dendritic microstructure could be obtained by isothermal heat treatment. With increasing holding temperature from 560 to 575 °C or holding time from 5 to 30 min, the liquid volume fraction increases, the average size of α-Mg grains grows larger and globular tendency becomes more obvious. In addition, the Mg2Si phase transforms from Chinese script shape to granule shape. The morphology modification mechanisium of Mg2Si phase in Mg-8%Al-1%Si alloy during the semisolid isothermal heat treatment was also studied.展开更多
Based on the entropy function, a two-dimensional phase field model of binary alloys was established. Meanwhile, an explicit difference method with uniform grid was adopted to solve the phase field and solute field con...Based on the entropy function, a two-dimensional phase field model of binary alloys was established. Meanwhile, an explicit difference method with uniform grid was adopted to solve the phase field and solute field controlled equations. And the alternating direction implicit(ADI) algorithm for solving temperature field controlled equation was also employed to avoid the restriction of time step. Some characteristics of the Ni-Cu alloy were captured in the process of non-isothermal solidification, and the comparative analysis of the isothermal and the non-isothermal solidification was investigated. The simulation results indicate that the non-isothermal model is favorable to simulate the real solidification process of binary alloys, and when the thermal diffusivity decreases, the non-isothermal phase-field model is gradually consistent with the isothermal phase-field model.展开更多
The formation and evolution characteristics of bcc phase during the isothermal relaxation processes for supercooled-liquid and amorphous Pb were investigated by molecular dynamics simulation and cluster-type index met...The formation and evolution characteristics of bcc phase during the isothermal relaxation processes for supercooled-liquid and amorphous Pb were investigated by molecular dynamics simulation and cluster-type index method （CTIM）. It is found that during the relaxation process, the formation and evolution of bcc phase are closely dependent on the initial temperature and structure. During the simulation time scale, when the initial temperature is in the range of supercooled liquid region, the bcc phase can be formed and kept a long time; while it is in the range of glassy region, the bcc phase can be formed at first and then partially transformed into hcp phase; when it decreases to the lower one, the hcp and fcc phases can be directly transformed from the glassy structure without undergoing the metastable bcc phase. The Ostwald＇s ＂step rule＂ is impactful during the isothermal relaxation process of the supercooled and glassy Pb, and the metastable bcc phase plays an important role in the precursor of crystallization.展开更多
The Mg-Ni hydride was prepared by hydriding combustion synthesis under a high magnetic field. The dehydriding kinetics of the hydrides was measured under the isothermal and non-isothermal conditions. A model was appli...The Mg-Ni hydride was prepared by hydriding combustion synthesis under a high magnetic field. The dehydriding kinetics of the hydrides was measured under the isothermal and non-isothermal conditions. A model was applied to analyzing the kinetics behavior of Mg-Ni hydride. The calculation results show that the theoretical value and the experimental data can reach a good agreement, especially in the case of non-isothermal dehydriding. The rate-controlling step is the diffusion of hydrogen atoms in the solid solution. The sample prepared under magnetic field of 6 T under the isothermal condition can reach the best performance. The similar tendency was observed under the non-isothermal condition and the reason was discussed.展开更多
Using simple unequal-thickness billet combining isothermal local loading can control the metal flow and improve the cavity fill in manufacturing process of large-scale rib-web titanium alloy component with low cost an...Using simple unequal-thickness billet combining isothermal local loading can control the metal flow and improve the cavity fill in manufacturing process of large-scale rib-web titanium alloy component with low cost and short cycle. The beveling transition pattern is well used for variable-thickness region of billet （VTRB） due to its simple and ample range of transition condition. The transition condition development in the local loading process has a significant influence on dynamic boundary of unrestricted portion of VTRB. With the help of reasonable assumptions, a mathematical model of transition condition development was established by theoretical analysis. The predicted results for local loading process of rib-web component using the established model were compared with the numerical and experimental ones, and the results indicated that the model of transition condition development is reasonable. Using the established model could deal with the dynamic boundary of unrestricted portion of VTRB well, and the model is suitable for the analysis of metal flow and cavity fill in local loading process of multi-ribs component.展开更多
文摘This study investigates the potential of Prosopis cineraria Leaves Powder(PCLP)as a biosorbent for removing lead(Pb)and zinc(Zn)from aqueous solutions,optimizing the process using Response Surface Methodology(RSM).Prosopis cineraria,commonly known as Khejri,is a drought-resistant tree with significant promise in environmental applications.The research employed a Central Composite Design(CCD)to examine the independent and combined effects of key process variables,including initial metal ion concentration,contact time,pH,and PCLP dosage.RSM was used to develop mathematical models that explain the relationship between these factors and the efficiency of metal removal,allowing the determination of optimal operating conditions.The experimental results indicated that the Langmuir isotherm model was the most appropriate for describing the biosorption of both metals,suggesting favorable adsorption characteristics.Additionally,the D-R isotherm confirmed that chemisorption was the primary mechanism involved in the biosorption process.For lead removal,the optimal conditions were found to be 312.23 K temperature,pH 4.72,58.5 mg L-1 initial concentration,and 0.27 g biosorbent dosage,achieving an 83.77%removal efficiency.For zinc,the optimal conditions were 312.4 K,pH 5.86,53.07 mg L-1 initial concentration,and the same biosorbent dosage,resulting in a 75.86%removal efficiency.These findings highlight PCLP’s potential as an effective,eco-friendly biosorbent for sustainable heavy metal removal in water treatment.
基金the support from the National Natural Science Foundation of China(Grant Nos.52074198,52374342,and U21A20113)the Department of Science and Technology of Hubei Province(Grant Nos.2023AFB603 and 2023DJC140).
文摘The transformation mechanism of the inclusions and microstructure in 316L stainless steel after post-isothermal heat treatment(IHT)was revealed,along with the pitting behavior of the inclusions in a chloride environment before and after the transformation.The effect of the inclusion transformation on the pitting corrosion behavior of 316L stainless steel and its intrinsic mechanism was also revealed.Results revealed a gradual transformation of MnO-SiO_(2)inclusions into MnO-Cr_(2)O_(3) within the temperature range of 1373 to 1573 K.MnO-Cr_(2)O_(3)inclusions exhibited minimal dissolution in chloride ion corrosion environments,while MnO-SiO_(2)oxides demonstrated higher electrochemical activity and were more prone to dissolve and form pits.Meanwhile,IHT significantly reduced the dislocation density of stainless steel,rendering it more stable in corrosive environments.X-ray photoelectron spectroscopy peak distributions of the passive films demonstrated that IHT increased the proportion of Cr and Fe oxides and hydroxides in the passive film which improved the stability and corrosion resistance of the steel.
基金supported by the National Natural Science Foundation of China (Grant Nos.U20A20168 and 62404120)the National Key R&D Program (Grant No.2022YFB3204100)+2 种基金the Postdoctoral Fellowship Program of CPSF (Grant Nos.GZB20240335 and GZC20231216)the China Postdoctoral Science Foundation (Grant No.2025T180151)the Initiative Scientific Research Program of the School of Integrated Circuits,Tsinghua University。
文摘Block copolymer(BCP) nanolithography offers potential beyond traditional photolithographic limits, yet reliably producing low-defect, perpendicular domains remains challenging. We introduce a microenvironmentdriven isothermal annealing method for directed self-assembly of BCP thin films. By annealing films at stable temperature in a quasi-sealed, inert-gas chamber, our approach promotes highly uniform perpendicular lamellar nanopatterns over large areas, effectively mitigating environmental fluctuations and emulating solvent-vapor annealing without solvent exposure. Resulting BCP structures demonstrate enhanced spatial coherence and notably low defect density. Furthermore, we successfully transfer these nanopatterns into precise metal nano-line arrays,confirming the method's capability for high-fidelity pattern replication. This scalable, solvent-free technique provides a robust, reliable route for high-resolution nanopatterning in advanced semiconductor manufacturing.
文摘Phosphoric acid is a key ingredient in fertilizer production and contains many rare earth elements(REEs).Recovering REEs from phosphoric acid can prevent the accumulation of these elements in the soil and help bridge the gap between supply and demand.In this concern,a new material called Si-6G PAMAMPPAAM dendrimers modified silica gel terminated with phenylphosphonic acid-amide moieties was developed and its ability to adsorb Nd(Ⅲ)and Er(Ⅲ)from the phosphoric acid solution was investigated.K inetics and isotherm of the uptake process were investigated to explo re the so rption characte ristics.The attained results show that both metal ions exhibit the same adsorption performance,and the uptake process is depicted as a chemisorption,monolayer,uniform,and homogeneous process.The equilibrium state is achieved within 120 min,and the maximum uptake capacity is 16.7 mg Nd(Ⅲ)/g,and 14.0 mg Er(Ⅲ)/g.Sorption thermodynamics is an endothermic,spontaneous,and feasible uptake process.Nitric acid(1.0 mol/L)is found to be efficient for adsorbing about 94.3%and 92.5%of neodymium(Ⅲ)and erbium(Ⅲ)respectively,and the prepared Si-6G PAMAM-PPAAM demonstrates excellent stability over five consecutive sorption/desorption cycles.Preliminary tests on commercial phosphoric acid demonstrate that Si-6G PAMAM-PPAAM retains its effective REEs uptake from a complex comm ercial phosph oric acid solution.
基金financially supported by the Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking (No. KF-20-3)Shandong Postdoctoral Science Foundation, China (No. SDCX-ZG-202301014)。
文摘Silicomanganese dust contains large amounts of valuables,such as Si and Mn,which can be used as raw materials for the smelting of silicomanganese.However,the direct addition of dust to the submerged arc furnace can influence the permeability of burden due to the fine particle size of dust,which results in incomplete reduction reactions during the smelting process.In this paper,silicomanganese dust,graphite powder,and other additives were pressed to form carbon-containing dust briquettes,and the self-reduction process of the dust briquettes was investigated through the isothermal thermogravimetric method with different carbon–oxygen (C/O) molar ratios,contents of fluxing agents,and reduction temperatures.Various reduction kinetic models for dust briquettes at different temperatures were established.The results show that the reaction fraction of the dust briquettes was about 90%at a C/O molar ratio of 1.2 with optimal reduction efficiency.The addition of CaF_(2)contributed to the decrease in the melting point and viscosity of dust briquettes,which increased their reduction rate.As the reduction temperature increased,the reduction rate of dust briquettes increased.The reduction reaction rate of dust briquettes was controlled through gas-phase diffusion.Meanwhile,their reduction process was analyzed kinetically,with the reaction time of 5 min as the dividing line.The apparent activation energies for the two diffusion stages were 56.10 and 100.52 kJ/mol,respectively.The kinetic equations are expressed as[1-(1-f)^(1/3)]^(2)=0.69e^(-56100/(RT))t and [1-(1-f)^(1/3)]^(2)=2.06e^(-100520/(RT))t.
基金supported by the Sichuan Provincial Regional Innovation Cooperation Project(No.2024YFHZ0159).
文摘Semicrystalline polymers usually undergo multilevel microstructural evolutions with annealing and stretching processes,which is es-sential to tailor the physical properties of the polymer.Here,poly(butylene carbonate)(PBC)sheets were prepared via isothermal annealing and unidirectional pre-stretching processes,then the changes of PBC in crystallinity,mechanical properties,thermal properties and microscopic changes before and after annealing and stretching were measured,as well as the relationship between microstructure and macroscopic proper-ties before and after stretching.The strengthening mechanism of PBC was also described.It was demonstrated that shish-kabab structure emerged under the pre-stretching process.With the increase of the tensile ratio,the crystallinity,structure and mechanical properties are in-creased differently.Among them,the crystallinity and tensile strength after annealing-stretching treatment increased to 24.45%and 104.5 MPa,respectively,which were about 1.55 times and 3.4 times of those-without any treatment.
基金supported by the National Natural Science Foundation of China(No.52204302)Young Elite Scientist Sponsorship Program by CAST(No.YESS20220533)+1 种基金Hunan Provincial Natural Science Foundation of China(No.2022JJ50274)China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202103).
文摘The factors affecting the oxidation degree of vanadium–titanium magnetite (VTM) pellets were analyzed via the isothermal oxidation experiment. Furthermore, the oxidation kinetics of VTM pellets were explored through linear fitting to the kinetic equations based on the shrinking unreacted-core model. The results reveal that VTM pellets undergo oxidation in three distinct phases: pre-oxidation, mid-oxidation, and final stable phase. Notably, the mid-oxidation phase is absent in magnetite oxidation. The shrinking unreacted-core model has been proven to be suitable for modeling the process of oxidizing VTM pellets. In the pre-oxidation stage, the rate-controlling step is determined by both the oxidation temperature and the effective oxygen concentration. The influence of the effective oxygen concentration on the rate of oxidation is more pronounced at temperatures between 1073 and 1273 K, especially when the oxygen content falls below 15 vol.%. For the production of oxidized VTM pellets, it is necessary to maintain a preheating temperature above 1173 K (to accelerate the oxidation reaction) and below 1473 K (to prevent the swift formation of compact Fe2TiO5 at the shell of the pellet) in an oxygen-enriched atmosphere.
基金supported by National Natural Science Foundation of China(No.52204302)Young Elite Scientist Sponsorship Program by CAST(No.YESS20220533)Hunan Provincial Natural Science Foundation of China(No.2022JJ40625).
文摘The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was analyzed using the first-order irreversible reaction,following the shrinking unreacted nucleus model.The results demonstrate that VTM pellets prepared with 3Co-binder exhibit a faster oxidation rate than those with F-binder across the temperatures ranging from 1073 to 1473 K.In both cases,the oxidation process was controlled by an interfacial chemical reaction during the pre-oxidation stage and by internal diffusion during the mid-oxidation stage.The type of binder did not influence the primary oxidation control mechanism of the VTM pellets.However,the apparent rate constants in the pre-oxidation stage and the internal diffusion coefficients in the mid-oxidation stage were higher for pellets with 3Co-binder compared to those with F-binder.The apparent activation energies for the 3Co-binder pellets were similar to those of bentonite,indicating favorable kinetic conditions without negative impacts on the oxidation process.Nonetheless,it is important to note that pellets with F-binder required a longer oxidation time than those with 3Co-binder.
基金Supported by Central Guiding Local Science and Technology Development Fund Project of Hebei Province(226Z6501G)Science and Technology Program of Hebei Academy of Sciences(23306,24306,25306).
文摘[Objectives]To develop methods for the early and rapid detection of tomato gray mold.[Methods]Utilizing the ACTIN gene of Botrytis cinerea as the target,a set of specific primers for loop-mediated isothermal amplification(LAMP)was designed and screened.Subsequently,the reaction system and conditions were optimized to achieve rapid isothermal amplification of B.cinerea.[Results]Through agarose gel electrophoresis and SYBR GreenⅠvisualization analysis,the optimal dosages of BstⅡDNA polymerase and dNTPs,as well as the optimal ratio of internal to external primers,were determined to be 0.6 U/μL,1.25 mmol/L,and 2:1,respectively.The specific detection of B.cinerea was accomplished at 61℃ for 40 min,achieving a sensitivity of 100 ag/μL,which is 106 times greater than that of conventional PCR detection.When this method was applied to the detection of tomato diseases,the detection limit for B.cinerea spores reached 20 spores/mL.Furthermore,the pathogen was detectable in tomato leaves that had been infected for 4 d,despite the absence of visible phenotypic symptoms of gray mold.[Conclusions]This method is suitable for the early,rapid,sensitive,and visual detection of tomato gray mold,thereby offering technical support for its early diagnosis,prevention,and control.
基金Project(51075099) supported by the National Natural Science Foundation of ChinaProject(E201038) supported by Natural Science Foundation of the Heilongjiang Province,China+3 种基金Project(20090460884) supported by the China Postdoctoral Science Foundation Project(SKLSP201121) supported by the Fund of the State Key Laboratory of Solidification Processing in NWPU,ChinaProject (2011RFQXG010) supported by the Harbin City Young Scientists Foundation,ChinaProject(LBH-T1102) supported by the Specially Postdoctoral Science Foundation of Heilongjiang Province,China
文摘The microstructural evolution of AZ61 magnesium alloy predeformed by equal channel angular extrusion（ECAE） during semisolid isothermal treatment（SSIT） was investigated by means of optical metalloscopy and image analysis equipment.The process involved application of ECAE to as-cast alloy at 310 ℃ to induce strain prior to heating in the semisolid region for different time lengths.The results show that extrusion pass,isothermal temperature and processing route have an influence on microstructural evolution of predeformed AZ61 magnesium alloy during SSIT.With the increase of extrusion pass,the solid particle size is reduced gradually.When isothermal temperature increases from 530 ℃ to 560 ℃,the average particle size increases from 22 μm to 35 μm.When isothermal temperature is 575 ℃,the average particle size decreases.The particle size of microstructure of AZ61 magnesium alloy predeformed by ECAE at BC during SSIT is the finest.
基金Project(2009AA03Z423)supported by the High-tech Research and Development Program of ChinaProject(51071055)supported by the National Natural Science Foundation of ChinaProject(HEUFT05038)supported by the Basic Research Foundation of Harbin Engineering University,China
文摘A Mg-8%Al-1%Si alloy with semisolid microstructure was fabricated by isothermal heat treatment process. The effects of isothermal process parameters such as holding temperature and holding time on the microstructure of Mg-8%Al-1%Si alloy were investigated. The results show that a non-dendritic microstructure could be obtained by isothermal heat treatment. With increasing holding temperature from 560 to 575 °C or holding time from 5 to 30 min, the liquid volume fraction increases, the average size of α-Mg grains grows larger and globular tendency becomes more obvious. In addition, the Mg2Si phase transforms from Chinese script shape to granule shape. The morphology modification mechanisium of Mg2Si phase in Mg-8%Al-1%Si alloy during the semisolid isothermal heat treatment was also studied.
基金Projects(51161011,11364024)supported by the National Natural Science Foundation of China
文摘Based on the entropy function, a two-dimensional phase field model of binary alloys was established. Meanwhile, an explicit difference method with uniform grid was adopted to solve the phase field and solute field controlled equations. And the alternating direction implicit(ADI) algorithm for solving temperature field controlled equation was also employed to avoid the restriction of time step. Some characteristics of the Ni-Cu alloy were captured in the process of non-isothermal solidification, and the comparative analysis of the isothermal and the non-isothermal solidification was investigated. The simulation results indicate that the non-isothermal model is favorable to simulate the real solidification process of binary alloys, and when the thermal diffusivity decreases, the non-isothermal phase-field model is gradually consistent with the isothermal phase-field model.
基金Projects (50831003, 50571037) supported by the National Natural Science Foundation of China
文摘The formation and evolution characteristics of bcc phase during the isothermal relaxation processes for supercooled-liquid and amorphous Pb were investigated by molecular dynamics simulation and cluster-type index method （CTIM）. It is found that during the relaxation process, the formation and evolution of bcc phase are closely dependent on the initial temperature and structure. During the simulation time scale, when the initial temperature is in the range of supercooled liquid region, the bcc phase can be formed and kept a long time; while it is in the range of glassy region, the bcc phase can be formed at first and then partially transformed into hcp phase; when it decreases to the lower one, the hcp and fcc phases can be directly transformed from the glassy structure without undergoing the metastable bcc phase. The Ostwald＇s ＂step rule＂ is impactful during the isothermal relaxation process of the supercooled and glassy Pb, and the metastable bcc phase plays an important role in the precursor of crystallization.
基金Project(51464008) supported by the National Natural Science Foundation of ChinaProject(KY[2012]004) supported by the Key Laboratory Item of Education Office in Guizhou Province,China
文摘The Mg-Ni hydride was prepared by hydriding combustion synthesis under a high magnetic field. The dehydriding kinetics of the hydrides was measured under the isothermal and non-isothermal conditions. A model was applied to analyzing the kinetics behavior of Mg-Ni hydride. The calculation results show that the theoretical value and the experimental data can reach a good agreement, especially in the case of non-isothermal dehydriding. The rate-controlling step is the diffusion of hydrogen atoms in the solid solution. The sample prepared under magnetic field of 6 T under the isothermal condition can reach the best performance. The similar tendency was observed under the non-isothermal condition and the reason was discussed.
基金Project (50935007) supported by the National Natural Science Foundation of ChinaProject (2010CB731701) supported by the National Basic Research Program of China
文摘Using simple unequal-thickness billet combining isothermal local loading can control the metal flow and improve the cavity fill in manufacturing process of large-scale rib-web titanium alloy component with low cost and short cycle. The beveling transition pattern is well used for variable-thickness region of billet （VTRB） due to its simple and ample range of transition condition. The transition condition development in the local loading process has a significant influence on dynamic boundary of unrestricted portion of VTRB. With the help of reasonable assumptions, a mathematical model of transition condition development was established by theoretical analysis. The predicted results for local loading process of rib-web component using the established model were compared with the numerical and experimental ones, and the results indicated that the model of transition condition development is reasonable. Using the established model could deal with the dynamic boundary of unrestricted portion of VTRB well, and the model is suitable for the analysis of metal flow and cavity fill in local loading process of multi-ribs component.
