Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of ...Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.展开更多
Capturing and utilizing CO_(2)from the production process is the key to solving the excessive CO_(2)emission problem. CO_(2)hydrogenation with green hydrogen to produce olefins is an effective and promising way to uti...Capturing and utilizing CO_(2)from the production process is the key to solving the excessive CO_(2)emission problem. CO_(2)hydrogenation with green hydrogen to produce olefins is an effective and promising way to utilize CO_(2)and produce valuable chemicals. The olefins can be produced by CO_(2)hydrogenation through two routes, i.e., CO_(2)-FTS (carbon dioxide Fischer- Tropsch synthesis) and MeOH (methanol-mediated), among which CO_(2)-FTS has significant advantages over MeOH in practical applications due to its relatively high CO_(2)conversion and low energy consumption potentials. However, the CO_(2)-FTS faces challenges of difficult CO_(2)activation and low olefins selectivity. Iron-based catalysts are promising for CO_(2)-FTS due to their dual functionality of catalyzing RWGS and CO-FTS reactions. This review summarizes the recent progress on iron-based catalysts for CO_(2)hydrogenation via the FTS route and analyzes the catalyst optimization from the perspectives of additives, active sites, and reaction mechanisms. Furthermore, we also outline principles and challenges for rational design of high-performance CO_(2)-FTS catalysts.展开更多
Heterogeneous iron-based catalysts have drawn increasing attention in the advanced oxidation of persulfates due to their abundance in nature,the lack of secondary pollution to the environment,and their low cost over t...Heterogeneous iron-based catalysts have drawn increasing attention in the advanced oxidation of persulfates due to their abundance in nature,the lack of secondary pollution to the environment,and their low cost over the last a few years.In this paper,the latest progress in the research on the activation of persulfate by heterogeneous iron-based catalysts is reviewed from two aspects,in terms of synthesized catalysts(Fe0,Fe_(2)O_(3),Fe_(3)O_(4),FeOOH)and natural iron ore catalysts(pyrite,magnetite,hematite,siderite,goethite,ferrohydrite,ilmenite and lepidocrocite)focusing on efforts made to improve the performance of catalysts.The advantages and disadvantages of the synthesized catalysts and natural iron ore were summarized.Particular interests were paid to the activation mechanisms in the catalyst/PS/pollutant system for removal of organic pollutants.Future research challenges in the context of field application were also discussed.展开更多
In this study,a novel iron-based catalyst system,Fe(acac)3/(isocyanoimino)triptenylphosphorane(IITP)/AlR3,was employed for the synthesis of syndiotactic 1,2-polybutadiene in hexane.This catalyst system exhibits remark...In this study,a novel iron-based catalyst system,Fe(acac)3/(isocyanoimino)triptenylphosphorane(IITP)/AlR3,was employed for the synthesis of syndiotactic 1,2-polybutadiene in hexane.This catalyst system exhibits remarkably high catalytic activity,achieving a polymerization activity of 762 kgpolymer·molcatalyst^(-1)·h^(-1)at 50℃with a[BD]/[Fe]molar ratio of 20000.Furthermore,living polymerization characteristic were observed during the investigation of the polymerization kinetics of 1,3-butadiene polymerization.These characteristics were well demonstrated by a narrow molecular weight distribution(PDI≈2.0)of the resulting polybutadiene and a linear relationship between-ln(1-c)and polymerization time as well as number average molecular weight and polymer yield.The resultant polymer showed a 1,2-selectivity of approximately 76%and stereoregularity ranging from 62%to 73%(rrrr).Additionally,through kinetic studies on polymerization reaction,an apparent activation energy Ea value of this catalytic system was calculated to be 84.98 kJ·mol^(-1),which suggests that high polymerization temperature favors efficient polymerization.展开更多
A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characteriz...A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.展开更多
A systematic study was undertaken to investigate the effects of the manganese incorporation manner on the textural properties, bulk and surface phase compositions, reduction/carburization behaviors, and surface basici...A systematic study was undertaken to investigate the effects of the manganese incorporation manner on the textural properties, bulk and surface phase compositions, reduction/carburization behaviors, and surface basicity of an iron-based Fischer-Tropsch synthesis （FTS） catalyst. The catalyst samples were characterized by N2 physisorption, X-ray photoelectron spectroscopy （XPS）, H2 （or CO） temperature-programmed reduction （TPR）, CO2 temperature-programmed desorption （TPD）, and M5ssbauer spectroscopy. The FTS performance of the catalysts was studied in a slurry-phase continuously stirred tank reactor （CSTR）. The characterization results indicated that the manganese promoter incorporated by using the coprecipitation method could improve the dispersion of iron oxide, and decrease the size of the iron oxide crystallite. The manganese incorporated with the impregnation method is enriched on the catalyst＇s surface. The manganese promoter added with the impregnation method suppresses the reduction and carburization of the catalyst in H2, CO, and syngas because of the excessive enrichment of manganese on the catalyst surface. The catalyst added manganese using the coprecipitation method has the highest CO conversion （51.9%） and the lowest selectivity for heavy hydrocarbons （C12＋）.展开更多
The effects of Mg,La and Ca promoters on primary and secondary CO2 and H2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO2 catalysts are investigated.The chemisorbed oxygen atoms in the ...The effects of Mg,La and Ca promoters on primary and secondary CO2 and H2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO2 catalysts are investigated.The chemisorbed oxygen atoms in the primary pathway formed in the CO dissociation steps reacted with co-adsorbed hydrogen or carbon monoxide to produce H2O and CO2,respectively.The secondary pathway was the water-gas shift reaction.The results indicated that the CO2 production led to an increase in both primary and secondary pathways,and H2O production decreased when surface basicity of the catalyst increased in the order Ca 〉 Mg 〉 La.展开更多
The preparation of the iron-based catalysts promoted by cobalt with a small amount of copper and aluminum for the high temperature shift reaction （HTS） with different sequences of adding catalyst raw materials durin...The preparation of the iron-based catalysts promoted by cobalt with a small amount of copper and aluminum for the high temperature shift reaction （HTS） with different sequences of adding catalyst raw materials during neutralization and precipitation was investigated. XRD, BET and particle size distribution （PSD） were used to characterize the prepared catalysts. It was found that the catalyst crystals were all γ-Fe2O3, and the intermediate of the catalyst after aging was Fe3O4. The crystallographic form of the catalyst and its intermediate was not affected by the addition sequence in the neutralization and precipitation process. The results showed that the specific surface area and the particle size of the catalysts depended on the addition sequence to the mother liquor. Cobalt with a small amount of copper and aluminum could increase the specific surface area and decrease the particle size of catalysts.展开更多
The effects of Manganese （Mn） incorporation on a precipitated iron-based Fischer-Tropsch synthesis （FTS） catalyst were investigated using N2 physical adsorption, air differential thermal analysis （DTA）, H2 tempe...The effects of Manganese （Mn） incorporation on a precipitated iron-based Fischer-Tropsch synthesis （FTS） catalyst were investigated using N2 physical adsorption, air differential thermal analysis （DTA）, H2 temperature-programmed reduction （TPR）, and Mǒssbauer spectroscopy. The FTS performances of the catalysts were tested in a slurry phase reactor. The characterization results indicated that Mn increased the surface area of the catalyst, and improved the dispersion of （α-Fe2O3 and reduced its crystallite size as a result of the high dispersion effect of Mn and the Fe-Mn interaction. The Fe-Mn interaction also suppressed the reduction of （α-Fe2O3 to Fe3O4, stabilized the FeO phase, and （or） decreased the carburization degree of the catalysts in the H2 and syngas reduction processes. In addition, incorporated Mn decreased the initial catalyst activity, but improved the catalyst stability because Mn restrained the reoxidation of iron carbides to Fe3O4, and improved further carburization of the catalysts. Manganese suppressed the formation of CH4 and increased the selectivity to light olefins （C2-4^=）, but it had little effect on the selectivities to heavy （C5＋） hydrocarbons. All these results indicated that the strong Fe-Mn interaction suppressed the chemisorptive effect of the Mn as an electronic promoter, to some extent, in the precipitated iron-manganese catalyst system.展开更多
Fischer-Tropsch synthesis （FTS） was carried out with an industrial iron-based catalyst （100Fe/5Cu/6K/16SiO2, by weight） under the baseline conditions in a stirred tank slurry reactor （STSR）. The effects of activ...Fischer-Tropsch synthesis （FTS） was carried out with an industrial iron-based catalyst （100Fe/5Cu/6K/16SiO2, by weight） under the baseline conditions in a stirred tank slurry reactor （STSR）. The effects of activation pressure on the catalyst activity and selectivity were investigated. It was found that iron phase compositions, textural properties, and FTS performances of the catalysts were strongly dependent on activation pressure. The high activation pressure retards the carburization. MФssbauer effect spectroscopy （MES） results indicated that the contents of the iron carbides clearly decrease with the increase of activation pressure, especially for the activation pressure increasing from 1.0 MPa to 1.5 MPa, and the reverse trend is observed for superparamagnetic Fe^3＋ （spm）. The higher content of Fe^3＋ （spm） results in the higher amount of CO2 in tail gas when the catalyst is reduced at higher pressure. The catalyst activity decreases with the increase of activation pressure. The high quantity of iron carbides is necessary to obtain high FTS activity. However, the activity of the catalyst activated in syngas can not be predicted solely from the fraction of the carbides. It is concluded that activation with syngas at the lower pressure would be the most desirable for the better activity and stability on the iron-based catalyst.展开更多
Fischer‐Tropsch synthesis(FTS)has the potential to be a powerful strategy for producing liquid fuels from syngas if highly selective catalysts can be developed.Herein,a series of iron nanoparticle catalysts encapsula...Fischer‐Tropsch synthesis(FTS)has the potential to be a powerful strategy for producing liquid fuels from syngas if highly selective catalysts can be developed.Herein,a series of iron nanoparticle catalysts encapsulated by nitrogen‐doped graphitic carbon were prepared by a one‐step pyrolysis of a ferric L‐glutamic acid complex.The FeC‐800 catalyst pyrolyzed at 800°C showed excellent catalytic activity(239.4μmolCO gFe–1 s–1),high C5–C11 selectivity(49%),and good stability in FTS.The high dispersion of ferric species combined with a well‐encapsulated structure can effectively inhibit the migration of iron nanoparticles during the reaction process,which is beneficial for high activity and good stability.The nitrogen‐doped graphitic carbon shell can act as an electron donor to the iron particles,thus promoting CO activation and expediting the formation of Fe5C2,which is the key factor for obtaining high C5–C11 selectivity.展开更多
In this work, Temperature-Programmed Reduction Processes of iron oxide and 12 other kinds of promoted iron oxides were investigated. It is suggested that the reduction activation energy can be expressed as a normal di...In this work, Temperature-Programmed Reduction Processes of iron oxide and 12 other kinds of promoted iron oxides were investigated. It is suggested that the reduction activation energy can be expressed as a normal distribution. The distribution parameters were obtained by kinetic data fitting, which depends on the chemical and geometric characteristics of both the iron oxide and the promoter.展开更多
The polymerization of ethylene by two iron-based catalysts, {[2,6-ArN=C(Me)(2)C5H3N]FeCl2} (Ar = 2,6-C6H3-Me-2 I; 2,6-C6H3 (i-Pr)(2) II) has been investigated. Catalyst II produces higher molecular weight polyethylene...The polymerization of ethylene by two iron-based catalysts, {[2,6-ArN=C(Me)(2)C5H3N]FeCl2} (Ar = 2,6-C6H3-Me-2 I; 2,6-C6H3 (i-Pr)(2) II) has been investigated. Catalyst II produces higher molecular weight polyethylene (PE) and broadened polydispersities relative to catalyst I under analogous conditions and all polymers are linear. The kinetic profiles with iron catalysts showed a smooth pattern during both rate build-up and rate lowering, which are different from the metallocene catalysts. The polymerization activity increases with Al/Fe value and an optimum temperature range at 40 similar to 45 degreesC was observed. The molecular weight of PE decreases with the increase of Al/Fe ratio and rise of polymerization temperature.展开更多
Nitrogen oxide(NO_(x))pollutants emitted from coal combustion are attracting growing public concern.While the traditional technologies of reducing NO_(x) were mainly focused on terminal treatment,and the research on s...Nitrogen oxide(NO_(x))pollutants emitted from coal combustion are attracting growing public concern.While the traditional technologies of reducing NO_(x) were mainly focused on terminal treatment,and the research on source treatment is limited.This paper proposes a new coal combustion strategy that significantly reduces NO_(x) emissions during coal combustion.This strategy has two important advantages in reducing NO_(x) emissions.First,by introducing iron-based catalyst at the source,which will catalyze the conversion of coke nitrogen to volatile nitrogen during the pyrolysis process,thereby greatly reducing the coke nitrogen content.The second is de-NO_(x) process by a redox reaction between NO_(x) and reducing agents(coke,HCN,NH_(3),etc.)that occurred during coke combustion.Compared to direct combustion of coal,coke prepared by adding iron-based catalyst has 46.1% reduction in NO_(x) emissions.To determine the effect of iron-based additives on de-NO_(x) performance,demineralized coal(de-coal)was prepared to eliminate the effect of iron-based minerals in coal ash.The effects of iron compounds,additive dosages,and combustion temperatures on de-NO_(x) efficiency are systematically studied.The results revealed that the NO_(x) emission of the coke generated by pyrolysis of de-coal loaded with 3%(mass)Fe_(2)O_(3) decreases to 27.3% at combustion temperature of 900℃.Two main reasons for lower NO_(x) emissions were deduced:(1)During the catalytic coal pyrolysis stage,the nitrogen content in the coke decreases with the release of volatile nitrogen.(2)Part of the NO_(x) emitted during the coke combustion was converted into N_(2) for the catalytic effect of the Fe-based catalysts.It is of great practical value and scientific significance to the comprehensive treatment and the clean utilization process of coal.展开更多
Hydrogen energy,as the ultimate clean energy,effectively avoids the greenhouse effect.Chemical looping hydrogen production(CLHP),a versatile energy conversion and production technology,has garnered extensive attention...Hydrogen energy,as the ultimate clean energy,effectively avoids the greenhouse effect.Chemical looping hydrogen production(CLHP),a versatile energy conversion and production technology,has garnered extensive attention.CLHP demands redox catalysts with high oxygen capacity,regulatable reactivity,and structural integrity even under harsh operational conditions.Currently,sintering,agglomeration,and inactivation of redox catalysts during cyclic lattice oxygen release and restoration are challenging,hindering the wide industrialization of the chemical looping(CL)process.Moreover,the precise control of activity and reaction rate of the redox catalysts to flexibly accommodate the demands of various reaction substrates remains unclear.This paper introduces the design of a nano-scaled redox catalyst featuring a unique core-shell structure.By precisely controlling the shell thickness,a series of hierarchical Fe_(2)O_(3)@SiO_(2)redox catalysts were successfully synthesized.Building on this achievement,an in-depth investigation was conducted into the impact of the thickness and spatial structure of the inert support on the stability and mass transfer rate of the redox catalyst,aiming to achieve a perfect balance between these two factors during the CLHP process.A thin shell(70 nm)exhibits excellent cyclic stability,maintaining consistent performance in 30 consecutive redox cycles,while a thicker shell(200 nm)undergoes rapid deactivation due to the formation of a substantial amount of iron silicate.In-situ transmission electron microscopy(TEM)reveals that the SiO_(2)shell effectively restricts the agglomeration of Fe_(2)O_(3).The unique core-shell structure and controllable shell thickness offer novel insights into the flexible design of efficient and durable hierarchical redox catalysts with spatial structure.展开更多
Increasing environmental pollution and shortage of conventional fossil fuels have made it urgent to develop renewable and clean energy sources. Electrocatalytic water splitting, with its abundant raw materials, simple...Increasing environmental pollution and shortage of conventional fossil fuels have made it urgent to develop renewable and clean energy sources. Electrocatalytic water splitting, with its abundant raw materials, simple process, and zero carbon emission, is considered one of the most promising processes for producing carbon-neutral hydrogen which has excellent energy conversion efficiency and high gravimetric energy density. Among them, oxygen evolution reaction (OER) electrocatalysts and hydrogen evolution reaction (HER) electrocatalysts are critical to decreasing the intrinsic reaction energy barrier and boosting the hydrogen evolution efficiency. Therefore, it is imperative to develop and design low-cost, highly active, and stable OER and HER electrocatalysts to lower the overpotential and drive the electrocatalytic reactions. Transition metal sulfides, especially iron-based sulfides, have attracted extensive exploration by researchers as a result of its high abundance in the Earth's crust and near-metallic conductivity. Consequently, in this review, we systematically and comprehensively summarize the progress in the application of iron-based sulfides and their composites as OER and HER electrocatalysts in electrocatalysis. Detailed descriptions and illustrations of the special relationships among their composition, structure, and electrocatalytic performance are presented. Finally, this review points out the challenges and future prospects of iron-based sulfides in practical applications for designing and fabricating more promising iron-based sulfide OER and HER electrocatalysts. We believe that iron-based sulfide materials will have a wide range of application prospects as OER and HER electrocatalysts in the future.展开更多
Iron-based metal matrix composites(IMMCs)have attracted significant research attention due to their high specific stiffness and strength,making them potentially suitable for various engineering applications.Microstruc...Iron-based metal matrix composites(IMMCs)have attracted significant research attention due to their high specific stiffness and strength,making them potentially suitable for various engineering applications.Microstructural design,including the selection of reinforcement and matrix phases,the reinforcement volume fraction,and the interface issues are essential factors determining the engineering performance of IMMCs.A variety of fabrication methods have been developed to manufacture IMMCs in recent years.This paper reviews the recent advances and development of IMMCs with particular focus on microstructure design,fabrication methods,and their engineering performance.The microstructure design issues of IMMC are firstly discussed,including the reinforcement and matrix phase selection criteria,interface geometry and characteristics,and the bonding mechanism.The fabrication methods,including liquid state,solid state,and gas-mixing processing are comprehensively reviewed and compared.The engineering performance of IMMCs in terms of elastic modulus,hardness and wear resistance,tensile and fracture behavior is reviewed.Finally,the current challenges of the IMMCs are highlighted,followed by the discussion and outlook of the future research directions of IMMCs.展开更多
The synthesis of functionalized rubber copolymers is a topic of great research interest.In this study,we present a novel approach for the direct construction ofα-functionalized 3,4-polyisoprene through polymerization...The synthesis of functionalized rubber copolymers is a topic of great research interest.In this study,we present a novel approach for the direct construction ofα-functionalized 3,4-polyisoprene through polymerization of polar monomers and isoprene monomer.Theα-functionalized 3,4-polyisoprene was successfully synthesized via in situ sequential polymerization using the iron-based catalytic system(Fe(acac)_(3)/IITP/AliBu_(3)),exhibiting high activity and resistance to polar monomers without requiring protection of polar groups.The structure ofα-functionalized 3,4-polyisoprene was confirmed by proton nuclear magnetic resonance spectroscopy(^(1)H-NMR)and two-dimensional diffusion-ordered spectroscopy(2D DOSY)spectra analysis.The introduction of polar groups,particularly hydroxyl groups,enhanced the hydrophilicity of the copolymer.This was evidenced by a decrease in the water contact angle from 106.9°to 96.4°with increasing hydroxyl content in the copolymer.展开更多
Anode materials are an essential part of lithium-ion batteries(LIBs),which determine the performance and safety of LIBs.Currently,graphite,as the anode material of commercial LIBs,is limited by its low theoretical cap...Anode materials are an essential part of lithium-ion batteries(LIBs),which determine the performance and safety of LIBs.Currently,graphite,as the anode material of commercial LIBs,is limited by its low theoretical capacity of 372 mA·h·g^(−1),thus hindering further development toward high-capacity and large-scale applications.Alkaline earth metal iron-based oxides are considered a promising candidate to replace graphite because of their low preparation cost,good thermal stability,superior stability,and high electrochemical performance.Nonetheless,many issues and challenges remain to be addressed.Herein,we systematically summarize the research progress of alkaline earth metal iron-based oxides as LIB anodes.Meanwhile,the material and structural properties,synthesis methods,electrochemical reaction mechanisms,and improvement strategies are introduced.Finally,existing challenges and future research directions are discussed to accelerate their practical application in commercial LIBs.展开更多
基金supported by Thailand Science Research and Innovation Fund Chulalongkorn University,Thailand(IND66210014)。
文摘Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.
基金the National Natural Science Foundation of China-Outstanding Youth Foundation (No. 22322814)the National Natural Science Foundation of China (No. 22108144)the Natural Science Foundation of Shandong-Outstanding Youth Foundation (No. ZR2023YQ017)。
文摘Capturing and utilizing CO_(2)from the production process is the key to solving the excessive CO_(2)emission problem. CO_(2)hydrogenation with green hydrogen to produce olefins is an effective and promising way to utilize CO_(2)and produce valuable chemicals. The olefins can be produced by CO_(2)hydrogenation through two routes, i.e., CO_(2)-FTS (carbon dioxide Fischer- Tropsch synthesis) and MeOH (methanol-mediated), among which CO_(2)-FTS has significant advantages over MeOH in practical applications due to its relatively high CO_(2)conversion and low energy consumption potentials. However, the CO_(2)-FTS faces challenges of difficult CO_(2)activation and low olefins selectivity. Iron-based catalysts are promising for CO_(2)-FTS due to their dual functionality of catalyzing RWGS and CO-FTS reactions. This review summarizes the recent progress on iron-based catalysts for CO_(2)hydrogenation via the FTS route and analyzes the catalyst optimization from the perspectives of additives, active sites, and reaction mechanisms. Furthermore, we also outline principles and challenges for rational design of high-performance CO_(2)-FTS catalysts.
基金supported by the National Natural Science Foundation of China(No.52170071)the Natural Science Foundation of Guangdong Province(No.2022A1515011909)the Natural Science Foundation of Xiamen(No.3502Z20227187).
文摘Heterogeneous iron-based catalysts have drawn increasing attention in the advanced oxidation of persulfates due to their abundance in nature,the lack of secondary pollution to the environment,and their low cost over the last a few years.In this paper,the latest progress in the research on the activation of persulfate by heterogeneous iron-based catalysts is reviewed from two aspects,in terms of synthesized catalysts(Fe0,Fe_(2)O_(3),Fe_(3)O_(4),FeOOH)and natural iron ore catalysts(pyrite,magnetite,hematite,siderite,goethite,ferrohydrite,ilmenite and lepidocrocite)focusing on efforts made to improve the performance of catalysts.The advantages and disadvantages of the synthesized catalysts and natural iron ore were summarized.Particular interests were paid to the activation mechanisms in the catalyst/PS/pollutant system for removal of organic pollutants.Future research challenges in the context of field application were also discussed.
基金This work was financially supported by the National Key R&D Program of China(No.2022YFB3704700).
文摘In this study,a novel iron-based catalyst system,Fe(acac)3/(isocyanoimino)triptenylphosphorane(IITP)/AlR3,was employed for the synthesis of syndiotactic 1,2-polybutadiene in hexane.This catalyst system exhibits remarkably high catalytic activity,achieving a polymerization activity of 762 kgpolymer·molcatalyst^(-1)·h^(-1)at 50℃with a[BD]/[Fe]molar ratio of 20000.Furthermore,living polymerization characteristic were observed during the investigation of the polymerization kinetics of 1,3-butadiene polymerization.These characteristics were well demonstrated by a narrow molecular weight distribution(PDI≈2.0)of the resulting polybutadiene and a linear relationship between-ln(1-c)and polymerization time as well as number average molecular weight and polymer yield.The resultant polymer showed a 1,2-selectivity of approximately 76%and stereoregularity ranging from 62%to 73%(rrrr).Additionally,through kinetic studies on polymerization reaction,an apparent activation energy Ea value of this catalytic system was calculated to be 84.98 kJ·mol^(-1),which suggests that high polymerization temperature favors efficient polymerization.
基金The financial support from the National Natural Science Foundation of China (20590361)the National Outstanding Young Scientists Foundation of China (20625620)
文摘A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.
基金Foundation item:the National Natural Science Foundation of China(20590360)the Natural Science Foundation of Shanxi Province(2006021014)+1 种基金the National Outstanding Young Scientists Foundation of China(20625620)National Key Basic Research Program of China(973 Program)(2007CB216401).
文摘A systematic study was undertaken to investigate the effects of the manganese incorporation manner on the textural properties, bulk and surface phase compositions, reduction/carburization behaviors, and surface basicity of an iron-based Fischer-Tropsch synthesis （FTS） catalyst. The catalyst samples were characterized by N2 physisorption, X-ray photoelectron spectroscopy （XPS）, H2 （or CO） temperature-programmed reduction （TPR）, CO2 temperature-programmed desorption （TPD）, and M5ssbauer spectroscopy. The FTS performance of the catalysts was studied in a slurry-phase continuously stirred tank reactor （CSTR）. The characterization results indicated that the manganese promoter incorporated by using the coprecipitation method could improve the dispersion of iron oxide, and decrease the size of the iron oxide crystallite. The manganese incorporated with the impregnation method is enriched on the catalyst＇s surface. The manganese promoter added with the impregnation method suppresses the reduction and carburization of the catalyst in H2, CO, and syngas because of the excessive enrichment of manganese on the catalyst surface. The catalyst added manganese using the coprecipitation method has the highest CO conversion （51.9%） and the lowest selectivity for heavy hydrocarbons （C12＋）.
文摘The effects of Mg,La and Ca promoters on primary and secondary CO2 and H2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO2 catalysts are investigated.The chemisorbed oxygen atoms in the primary pathway formed in the CO dissociation steps reacted with co-adsorbed hydrogen or carbon monoxide to produce H2O and CO2,respectively.The secondary pathway was the water-gas shift reaction.The results indicated that the CO2 production led to an increase in both primary and secondary pathways,and H2O production decreased when surface basicity of the catalyst increased in the order Ca 〉 Mg 〉 La.
文摘The preparation of the iron-based catalysts promoted by cobalt with a small amount of copper and aluminum for the high temperature shift reaction （HTS） with different sequences of adding catalyst raw materials during neutralization and precipitation was investigated. XRD, BET and particle size distribution （PSD） were used to characterize the prepared catalysts. It was found that the catalyst crystals were all γ-Fe2O3, and the intermediate of the catalyst after aging was Fe3O4. The crystallographic form of the catalyst and its intermediate was not affected by the addition sequence in the neutralization and precipitation process. The results showed that the specific surface area and the particle size of the catalysts depended on the addition sequence to the mother liquor. Cobalt with a small amount of copper and aluminum could increase the specific surface area and decrease the particle size of catalysts.
基金Foundation item:the National Outstanding Young Scientists Foundation of China(20625620)the National Key Basic Research Program of China(973 Program,2007CB216401)+1 种基金the National Natural Science Foundation of China(20590360)the Natural Science Foundation of Shanxi Province(2006021014).
文摘The effects of Manganese （Mn） incorporation on a precipitated iron-based Fischer-Tropsch synthesis （FTS） catalyst were investigated using N2 physical adsorption, air differential thermal analysis （DTA）, H2 temperature-programmed reduction （TPR）, and Mǒssbauer spectroscopy. The FTS performances of the catalysts were tested in a slurry phase reactor. The characterization results indicated that Mn increased the surface area of the catalyst, and improved the dispersion of （α-Fe2O3 and reduced its crystallite size as a result of the high dispersion effect of Mn and the Fe-Mn interaction. The Fe-Mn interaction also suppressed the reduction of （α-Fe2O3 to Fe3O4, stabilized the FeO phase, and （or） decreased the carburization degree of the catalysts in the H2 and syngas reduction processes. In addition, incorporated Mn decreased the initial catalyst activity, but improved the catalyst stability because Mn restrained the reoxidation of iron carbides to Fe3O4, and improved further carburization of the catalysts. Manganese suppressed the formation of CH4 and increased the selectivity to light olefins （C2-4^=）, but it had little effect on the selectivities to heavy （C5＋） hydrocarbons. All these results indicated that the strong Fe-Mn interaction suppressed the chemisorptive effect of the Mn as an electronic promoter, to some extent, in the precipitated iron-manganese catalyst system.
基金supported by the Foundation of China Postdoctoral Science Foundation (20080430734)
文摘Fischer-Tropsch synthesis （FTS） was carried out with an industrial iron-based catalyst （100Fe/5Cu/6K/16SiO2, by weight） under the baseline conditions in a stirred tank slurry reactor （STSR）. The effects of activation pressure on the catalyst activity and selectivity were investigated. It was found that iron phase compositions, textural properties, and FTS performances of the catalysts were strongly dependent on activation pressure. The high activation pressure retards the carburization. MФssbauer effect spectroscopy （MES） results indicated that the contents of the iron carbides clearly decrease with the increase of activation pressure, especially for the activation pressure increasing from 1.0 MPa to 1.5 MPa, and the reverse trend is observed for superparamagnetic Fe^3＋ （spm）. The higher content of Fe^3＋ （spm） results in the higher amount of CO2 in tail gas when the catalyst is reduced at higher pressure. The catalyst activity decreases with the increase of activation pressure. The high quantity of iron carbides is necessary to obtain high FTS activity. However, the activity of the catalyst activated in syngas can not be predicted solely from the fraction of the carbides. It is concluded that activation with syngas at the lower pressure would be the most desirable for the better activity and stability on the iron-based catalyst.
文摘Fischer‐Tropsch synthesis(FTS)has the potential to be a powerful strategy for producing liquid fuels from syngas if highly selective catalysts can be developed.Herein,a series of iron nanoparticle catalysts encapsulated by nitrogen‐doped graphitic carbon were prepared by a one‐step pyrolysis of a ferric L‐glutamic acid complex.The FeC‐800 catalyst pyrolyzed at 800°C showed excellent catalytic activity(239.4μmolCO gFe–1 s–1),high C5–C11 selectivity(49%),and good stability in FTS.The high dispersion of ferric species combined with a well‐encapsulated structure can effectively inhibit the migration of iron nanoparticles during the reaction process,which is beneficial for high activity and good stability.The nitrogen‐doped graphitic carbon shell can act as an electron donor to the iron particles,thus promoting CO activation and expediting the formation of Fe5C2,which is the key factor for obtaining high C5–C11 selectivity.
文摘In this work, Temperature-Programmed Reduction Processes of iron oxide and 12 other kinds of promoted iron oxides were investigated. It is suggested that the reduction activation energy can be expressed as a normal distribution. The distribution parameters were obtained by kinetic data fitting, which depends on the chemical and geometric characteristics of both the iron oxide and the promoter.
基金This work was partly supported by the Foundation of the Director of Institute of Chemistry, Chinese Academy of Sciences.
文摘The polymerization of ethylene by two iron-based catalysts, {[2,6-ArN=C(Me)(2)C5H3N]FeCl2} (Ar = 2,6-C6H3-Me-2 I; 2,6-C6H3 (i-Pr)(2) II) has been investigated. Catalyst II produces higher molecular weight polyethylene (PE) and broadened polydispersities relative to catalyst I under analogous conditions and all polymers are linear. The kinetic profiles with iron catalysts showed a smooth pattern during both rate build-up and rate lowering, which are different from the metallocene catalysts. The polymerization activity increases with Al/Fe value and an optimum temperature range at 40 similar to 45 degreesC was observed. The molecular weight of PE decreases with the increase of Al/Fe ratio and rise of polymerization temperature.
基金supported by National Natural Science Foundation of China(21878210)Shanxi Provincial Science and Technology Achievement Transformation Guidance Special Program of China(202104021301052)Shanxi Province Patent Transformation Special Program Project(202202054).
文摘Nitrogen oxide(NO_(x))pollutants emitted from coal combustion are attracting growing public concern.While the traditional technologies of reducing NO_(x) were mainly focused on terminal treatment,and the research on source treatment is limited.This paper proposes a new coal combustion strategy that significantly reduces NO_(x) emissions during coal combustion.This strategy has two important advantages in reducing NO_(x) emissions.First,by introducing iron-based catalyst at the source,which will catalyze the conversion of coke nitrogen to volatile nitrogen during the pyrolysis process,thereby greatly reducing the coke nitrogen content.The second is de-NO_(x) process by a redox reaction between NO_(x) and reducing agents(coke,HCN,NH_(3),etc.)that occurred during coke combustion.Compared to direct combustion of coal,coke prepared by adding iron-based catalyst has 46.1% reduction in NO_(x) emissions.To determine the effect of iron-based additives on de-NO_(x) performance,demineralized coal(de-coal)was prepared to eliminate the effect of iron-based minerals in coal ash.The effects of iron compounds,additive dosages,and combustion temperatures on de-NO_(x) efficiency are systematically studied.The results revealed that the NO_(x) emission of the coke generated by pyrolysis of de-coal loaded with 3%(mass)Fe_(2)O_(3) decreases to 27.3% at combustion temperature of 900℃.Two main reasons for lower NO_(x) emissions were deduced:(1)During the catalytic coal pyrolysis stage,the nitrogen content in the coke decreases with the release of volatile nitrogen.(2)Part of the NO_(x) emitted during the coke combustion was converted into N_(2) for the catalytic effect of the Fe-based catalysts.It is of great practical value and scientific significance to the comprehensive treatment and the clean utilization process of coal.
基金financial support from the National Natural Science Foundation of China(52076209,22179027,22469006)the Foundation and Applied Foundation Research of Guangdong Province(2022B1515020045)the Heilongjiang Key Research and Development Project of China(JD22A026)。
文摘Hydrogen energy,as the ultimate clean energy,effectively avoids the greenhouse effect.Chemical looping hydrogen production(CLHP),a versatile energy conversion and production technology,has garnered extensive attention.CLHP demands redox catalysts with high oxygen capacity,regulatable reactivity,and structural integrity even under harsh operational conditions.Currently,sintering,agglomeration,and inactivation of redox catalysts during cyclic lattice oxygen release and restoration are challenging,hindering the wide industrialization of the chemical looping(CL)process.Moreover,the precise control of activity and reaction rate of the redox catalysts to flexibly accommodate the demands of various reaction substrates remains unclear.This paper introduces the design of a nano-scaled redox catalyst featuring a unique core-shell structure.By precisely controlling the shell thickness,a series of hierarchical Fe_(2)O_(3)@SiO_(2)redox catalysts were successfully synthesized.Building on this achievement,an in-depth investigation was conducted into the impact of the thickness and spatial structure of the inert support on the stability and mass transfer rate of the redox catalyst,aiming to achieve a perfect balance between these two factors during the CLHP process.A thin shell(70 nm)exhibits excellent cyclic stability,maintaining consistent performance in 30 consecutive redox cycles,while a thicker shell(200 nm)undergoes rapid deactivation due to the formation of a substantial amount of iron silicate.In-situ transmission electron microscopy(TEM)reveals that the SiO_(2)shell effectively restricts the agglomeration of Fe_(2)O_(3).The unique core-shell structure and controllable shell thickness offer novel insights into the flexible design of efficient and durable hierarchical redox catalysts with spatial structure.
基金the National Natural Science Foundation of China(No.22275052)the Natural Science Foundation of Hubei Province(No.2019CFB569)。
文摘Increasing environmental pollution and shortage of conventional fossil fuels have made it urgent to develop renewable and clean energy sources. Electrocatalytic water splitting, with its abundant raw materials, simple process, and zero carbon emission, is considered one of the most promising processes for producing carbon-neutral hydrogen which has excellent energy conversion efficiency and high gravimetric energy density. Among them, oxygen evolution reaction (OER) electrocatalysts and hydrogen evolution reaction (HER) electrocatalysts are critical to decreasing the intrinsic reaction energy barrier and boosting the hydrogen evolution efficiency. Therefore, it is imperative to develop and design low-cost, highly active, and stable OER and HER electrocatalysts to lower the overpotential and drive the electrocatalytic reactions. Transition metal sulfides, especially iron-based sulfides, have attracted extensive exploration by researchers as a result of its high abundance in the Earth's crust and near-metallic conductivity. Consequently, in this review, we systematically and comprehensively summarize the progress in the application of iron-based sulfides and their composites as OER and HER electrocatalysts in electrocatalysis. Detailed descriptions and illustrations of the special relationships among their composition, structure, and electrocatalytic performance are presented. Finally, this review points out the challenges and future prospects of iron-based sulfides in practical applications for designing and fabricating more promising iron-based sulfide OER and HER electrocatalysts. We believe that iron-based sulfide materials will have a wide range of application prospects as OER and HER electrocatalysts in the future.
基金funding support from the National Natural Science Foundation of China(No.52101046)Shuangjie Chu appreciates the funding support from the National Key Research and Development Program of China(No.2022YFB3705600).
文摘Iron-based metal matrix composites(IMMCs)have attracted significant research attention due to their high specific stiffness and strength,making them potentially suitable for various engineering applications.Microstructural design,including the selection of reinforcement and matrix phases,the reinforcement volume fraction,and the interface issues are essential factors determining the engineering performance of IMMCs.A variety of fabrication methods have been developed to manufacture IMMCs in recent years.This paper reviews the recent advances and development of IMMCs with particular focus on microstructure design,fabrication methods,and their engineering performance.The microstructure design issues of IMMC are firstly discussed,including the reinforcement and matrix phase selection criteria,interface geometry and characteristics,and the bonding mechanism.The fabrication methods,including liquid state,solid state,and gas-mixing processing are comprehensively reviewed and compared.The engineering performance of IMMCs in terms of elastic modulus,hardness and wear resistance,tensile and fracture behavior is reviewed.Finally,the current challenges of the IMMCs are highlighted,followed by the discussion and outlook of the future research directions of IMMCs.
基金financially supported by the National Key R&D Program of China(No.2022YFB3704701)the National Key R&D Program of China(No.2022YFC2603502)+1 种基金Natural Science Foundation of Shandong Province(No.ZR2022QE271)the financial support from the Taishan Scholars Program(No.tsqn202211165)。
文摘The synthesis of functionalized rubber copolymers is a topic of great research interest.In this study,we present a novel approach for the direct construction ofα-functionalized 3,4-polyisoprene through polymerization of polar monomers and isoprene monomer.Theα-functionalized 3,4-polyisoprene was successfully synthesized via in situ sequential polymerization using the iron-based catalytic system(Fe(acac)_(3)/IITP/AliBu_(3)),exhibiting high activity and resistance to polar monomers without requiring protection of polar groups.The structure ofα-functionalized 3,4-polyisoprene was confirmed by proton nuclear magnetic resonance spectroscopy(^(1)H-NMR)and two-dimensional diffusion-ordered spectroscopy(2D DOSY)spectra analysis.The introduction of polar groups,particularly hydroxyl groups,enhanced the hydrophilicity of the copolymer.This was evidenced by a decrease in the water contact angle from 106.9°to 96.4°with increasing hydroxyl content in the copolymer.
基金supported by the Natural Science Foundation of China (21306046)the Open Project of State Key Laboratory of Chemical Engineering (SKL-Che-15C03)+2 种基金the Fundamental Research Funds for the Central Universities (WA1514013)the 111 Project of Ministry of Education of China (B08021)supported by the China Scholarship Council (CSC) for the research at Norwegian University of Science and Technology (NTNU)
基金The authors acknowledge the support of the Shenyang University of Technology(QNPY202209-4)the National Natural Science Foundation of China(21571132)+1 种基金Jiangsu University Advanced Talent Fund(5501710002)the Education Department of Liaoning Province(JYTQN2023285).
文摘Anode materials are an essential part of lithium-ion batteries(LIBs),which determine the performance and safety of LIBs.Currently,graphite,as the anode material of commercial LIBs,is limited by its low theoretical capacity of 372 mA·h·g^(−1),thus hindering further development toward high-capacity and large-scale applications.Alkaline earth metal iron-based oxides are considered a promising candidate to replace graphite because of their low preparation cost,good thermal stability,superior stability,and high electrochemical performance.Nonetheless,many issues and challenges remain to be addressed.Herein,we systematically summarize the research progress of alkaline earth metal iron-based oxides as LIB anodes.Meanwhile,the material and structural properties,synthesis methods,electrochemical reaction mechanisms,and improvement strategies are introduced.Finally,existing challenges and future research directions are discussed to accelerate their practical application in commercial LIBs.
