The flux cored wires with different amounts of rare earth （RE） oxides additions for hardfacing （harden-face-welding） the workpieces of high chromium cast iron were studied in this work.The morphology of carbides i...The flux cored wires with different amounts of rare earth （RE） oxides additions for hardfacing （harden-face-welding） the workpieces of high chromium cast iron were studied in this work.The morphology of carbides in hardfacing metal was observed,and the type of the carbides was determined by optical microscopy,scanning electron microscopy （SEM）,energy dispersive spectrometer （EDS） and X-ray diffraction （XRD）.Based on the data of effect of RE on carbides morphology,the refined reason for carbide by RE oxide was discussed with the misfit theory.The results showed that,the microstructure of hardfacing metal was composed of martensite,residual austenite and M7C3 carbides.With the increasing amount of RE oxide additions,the volume fraction and roundness of the carbides were increased,however,the area and perimeter of carbides were decreased.It indicated that carbides in hardfacing metal could be refined and spheroidized by adding RE oxides in flux cored wires.展开更多
In this research, a vermicular graphite cast iron brake drum was produced by cored wire injection in a one-step method. Silica sand and low-density alumina-silicate ceramic were used as molding materials in order to i...In this research, a vermicular graphite cast iron brake drum was produced by cored wire injection in a one-step method. Silica sand and low-density alumina-silicate ceramic were used as molding materials in order to investigate the effect of cooling rate on percentage of vermicular graphite and mechanical properties of the brake drum casting. Several thermocouples were inserted into the casting in the desired positions to measure the temperature change. By means of one-step cored wire injection, the two residual concentrations of Mg and RE were effectively controlled in the ranges of 0.013%-0.017% and 0.019%-0.025%, respectively, which are crucial for the production of vermicular graphite cast iron and the formation of vermicular graphite. In addition, the cooling rate had a significant effect on the vermicular graphite percentage. In the case of the silica mold brake drum casting, there was an obvious difference in the cooling rate with the wall change, leading to a change in vermicular graphite percentage from 70.8% to 90%. In the low-density alumina-silicate ceramic mold casting, no obvious change in temperature was detected by the thermocouples and the percentage of the vermicular graphite was stable at 85%. Therefore, the vermicular graphite cast iron brake drum with a better combination of mechanical properties could be obtained.展开更多
基金Project supported by One Hundred Excellent Talents of Hebei Province of China and Key Project of Science and Technology of Hebei Province (09215106D)
文摘The flux cored wires with different amounts of rare earth （RE） oxides additions for hardfacing （harden-face-welding） the workpieces of high chromium cast iron were studied in this work.The morphology of carbides in hardfacing metal was observed,and the type of the carbides was determined by optical microscopy,scanning electron microscopy （SEM）,energy dispersive spectrometer （EDS） and X-ray diffraction （XRD）.Based on the data of effect of RE on carbides morphology,the refined reason for carbide by RE oxide was discussed with the misfit theory.The results showed that,the microstructure of hardfacing metal was composed of martensite,residual austenite and M7C3 carbides.With the increasing amount of RE oxide additions,the volume fraction and roundness of the carbides were increased,however,the area and perimeter of carbides were decreased.It indicated that carbides in hardfacing metal could be refined and spheroidized by adding RE oxides in flux cored wires.
基金financially supported by the Foundation of Heilongjiang Educational Committee(Grant No.12531116)the Harbin Special Funds for Creative Talents in Science and Technology(Grant No.2013RFQXJ102)
文摘In this research, a vermicular graphite cast iron brake drum was produced by cored wire injection in a one-step method. Silica sand and low-density alumina-silicate ceramic were used as molding materials in order to investigate the effect of cooling rate on percentage of vermicular graphite and mechanical properties of the brake drum casting. Several thermocouples were inserted into the casting in the desired positions to measure the temperature change. By means of one-step cored wire injection, the two residual concentrations of Mg and RE were effectively controlled in the ranges of 0.013%-0.017% and 0.019%-0.025%, respectively, which are crucial for the production of vermicular graphite cast iron and the formation of vermicular graphite. In addition, the cooling rate had a significant effect on the vermicular graphite percentage. In the case of the silica mold brake drum casting, there was an obvious difference in the cooling rate with the wall change, leading to a change in vermicular graphite percentage from 70.8% to 90%. In the low-density alumina-silicate ceramic mold casting, no obvious change in temperature was detected by the thermocouples and the percentage of the vermicular graphite was stable at 85%. Therefore, the vermicular graphite cast iron brake drum with a better combination of mechanical properties could be obtained.
