With the size-resolved aerosol mass and ion composition data obtained at Lin＇an regional atmospheric pollution monitoring station in July 2003, the size distributions of aerosol mass and ionic components, and the cor...With the size-resolved aerosol mass and ion composition data obtained at Lin＇an regional atmospheric pollution monitoring station in July 2003, the size distributions of aerosol mass and ionic components, and the correlations between major ion pairs were analyzed. The primary results indicate that in the period of in-situ measurement, the aerosols are mainly composed of fine particles. The mass of aerosols with size less than 2.1 μm accounts for 66% of the total mass of all size ranges, in which about 50% of the mass is contributed by the particles with size less than 0.65 μm. Similar to the size distributions of aerosol mass, the water-soluble ions are mainly concentrated in the size range of 〈0.65 μm, accounting for about 77% of the sum of analyzed ions, and the ions within the range of 〈2.1 μm reach 88%. The sulfate, ammonium, and potassium are the dominant ionic components in fine particles （particle size less than 2.1 μm）. Ion correlation analysis suggests that the sulfates in fine particles are mostly in the compounds of （NH4）2SO4, Na2SO4, and K2SO4, but for submicron particles the sulfates are mainly in the form of （NH4）2SO4.展开更多
As a kind of ionic artificial muscle material,Ionic Polymer-Metal Composites(IPMCs)have the advantages of a low drive current,light weight,and significant flexibility.IPMCs are widely used in the fields of biomedicine...As a kind of ionic artificial muscle material,Ionic Polymer-Metal Composites(IPMCs)have the advantages of a low drive current,light weight,and significant flexibility.IPMCs are widely used in the fields of biomedicine,soft robots,etc.However,the displacement and blocking force of the traditional sheet-type Nafion-IPMC need to be improved,and it has the limitation of unidirectional actuation.In this paper,a new type of short side chain Aquivion material is used as the polymer in the IPMC.The cylindrical IPMC is prepared by extrusion technology to improve its actuation performance and realize multi-degree-of-freedom motion.In comparison to the traditional Nafion-IPMC,the ion exchange capacity,specific capacitance,and conductivity of Aquivion-IPMC are improved by 28%,27%,and 32%,respectively,and the displacement and blocking force are improved by 57%and 25%,respectively.The cylindrical actuators can be deflected in eight directions.This indicates that Aquivion,as a polymer membrane for IPMC,holds significant application potential.By designing a cylindrical IPMC electrode distribution,the multi-degree-of-freedom deflection of IPMC can be realized.展开更多
The development of actuators based on ionic polymers as soft robotics,artificial muscles,and sensors is currently considered one of the most urgent topics.They are lightweight materials,in addition to their high effic...The development of actuators based on ionic polymers as soft robotics,artificial muscles,and sensors is currently considered one of the most urgent topics.They are lightweight materials,in addition to their high efficiency,and they can be controlled by a low power source.Nevertheless,the most popular ionic polymers are derived from fossil-based resources.Hence,it is now deemed crucial to produce these actuators using sustainable materials.In this review,the use of ionic polymeric materials as actuators is reviewed through the emphasis on their role in the domain of renewablematerials.The reviewencompasses recent advancements inmaterial formulation and performance enhancement,alongside a comparative analysis with conventional actuator systems.It was found that renewable polymeric actuators based on ionic gels and conductive polymers are easier to prepare compared to ionic polymermetal composites.In addition,the proportion of actuator manufacturing utilizing renewable materials rose to 90%,particularly for ion gel actuators,which was related to the possibility of using renewable polymers as ionic or conductive substances.Moreover,the possible improvements in biopolymeric actuators will experience an annual rise of at least 10%over the next decade,correlating with the growth of their market,which aligns with the worldwide goal of reducing global warming.Additionally,compared to fossil-derived polymers,the decomposition rate of renewable materials reaches 100%,while biodegradable fossil-based substances can exceed 60%within several weeks.Ultimately,this review aims to elucidate the potential of ionic polymeric materials as a viable and sustainable solution for future actuator technologies.展开更多
In order to study the electrodeposition process of iridium in composite ionic liquid, the effects of N, N-dimethylacetamide（DMAC） on the viscosity, conductivity and electrochemical stability of composite ionic liqui...In order to study the electrodeposition process of iridium in composite ionic liquid, the effects of N, N-dimethylacetamide（DMAC） on the viscosity, conductivity and electrochemical stability of composite ionic liquid BMIC-BMIBF4, as well as the electrochemical behavior of Ir Cl3 in this system were studied. Iridium（Ir） coatings were deposited at different constant potentials and characterized by SEM and XRD. The results show that the addition of DMAC can evidently decrease the viscosity of the composite system, increase conductivity and improve electrochemical stability of the composite system. Cyclic voltammograms of a Au electrode illustrate that the process controlled by diffusion rate is irreversible with the average charge transfer coefficient of 0.170 and average diffusion coefficient of 1.096×10-6 cm^2/s. In addition, SEM image shows that Ir film deposited at the reduction peak potential is dense and even, while XRD pattern shows that Ir deposit is polycrystalline structure.展开更多
Recently,researchers have concentrated on studying ionic polymer metal composite(IPMC)artificial muscle,which has numerous advantages including a relatively large strain under low input voltage,flexibility,high respon...Recently,researchers have concentrated on studying ionic polymer metal composite(IPMC)artificial muscle,which has numerous advantages including a relatively large strain under low input voltage,flexibility,high response,low noise,light weight,and high driving energy density.This paper reports recent developments in IPMC artificial muscle,including improvement methods,modeling,and applications.Different types of IPMCs are described,along with various methods for overcoming some shortcomings,including improvement of Nafion matrix membranes,surface preparation of Nafion membranes,the choice of high-performing electrodes,and new electro-active polymers for enhancing the properties of IPMCs.IPMC models are also reviewed,providing theoretical guidance for studying the performance and applications of IPMCs.Successful applications such as bio-inspired robots,opto-mechatronic systems,and medical engineering are discussed.展开更多
All-solid-state lithium batteries(ASSLBs) employing sulfide electrolyte and lithium(Li) anode have received increasing attention due to the intrinsic safety and high energy density.However,the thick electrolyte layer ...All-solid-state lithium batteries(ASSLBs) employing sulfide electrolyte and lithium(Li) anode have received increasing attention due to the intrinsic safety and high energy density.However,the thick electrolyte layer and lithium dendrites formed at the electrolyte/Li anode interface hinder the realization of high-performance ASSLBs.Herein,a novel membrane consisting of Li_(6)PS_(5) Cl(LPSCl),poly(ethylene oxide)(PEO) and Li-salt(LiTFSI) was prepared as sulfide-based composite solid electrolyte(LPSCl-PEO3-LiTFSI)(LPSCl:PEO=97:3 wt/wt;EO:Li=8:1 mol/mol),which delivers high ionic conductivity(1.1 × 10^(-3) S cm^(-1)) and wide electrochemical window(4.9 V vs.Li^(+)/Li) at 25 ℃.In addition,an ex-situ artificial solid electrolyte interphase(SEI) film enriched with LiF and Li3 N was designed as a protective layer on Li anode(Li(SEI)) to suppress the growth of lithium dendrites.Benefiting from the synergy of sulfide-based composite solid electrolyte and ex-situ artificial SEI,cells of S-CNTs/LPSCI-PEO3-LiTFSI/Li(SEI) and Al_(2)O_(3)@LiNi_(0.5)Co_(0.3)Mn_(0.2)O_(2)/LPSCl-PEO3-LiTFSI/Li(SEI) are assembled and both exhibit high initial discharge capacity of 1221.1 mAh g^(-1)(135.8 mAh g^(-1)) and enhanced cycling stability with 81.6% capacity retention over 200 cycles at 0.05 C(89.2% over 100 cycles at 0.1 C).This work provides a new insight into the synergy of composite solid electrolyte and artificial SEI for achieving high-performance ASSLBs.展开更多
Based on the biological prototype characteristics of shark’s gill jet orifice,the flexible driving characteristics of ionic exchange polymer metal composites(IPMC)artificial muscle materials and the use of sleeve fle...Based on the biological prototype characteristics of shark’s gill jet orifice,the flexible driving characteristics of ionic exchange polymer metal composites(IPMC)artificial muscle materials and the use of sleeve flexible connector,the IPMC linear driving unit simulation model is built and the IPMC material-driving dynamic control structure of bionic gill unit is developed.Meanwhile,through the stress analysis of bionic gill plate and the motion simulation of bionic gill unit,it is verified that various dynamic control and active control of the jet orifice under the condition of different mainstream field velocities will be taken by using IPMC material-driving.Moreover,the large-deflection deformation of bionic gill plate under dynamic pressure and the comparative analysis with that of a rigid gill plate is studied,leading to the achievement of approximate revised modifier from real value to theoretical value of the displacement control of IPMC.展开更多
A new model is proposed to estimate Young's modulus and surface electrode resistance of the ionic polymer-metai composite(IPMC)with a gradient distribution of micros true ture.The entire IPMC electrode is divided ...A new model is proposed to estimate Young's modulus and surface electrode resistance of the ionic polymer-metai composite(IPMC)with a gradient distribution of micros true ture.The entire IPMC electrode is divided into two parts,i.e.,the porous metal electrode and the gradient polymer-metai composite electrode,according to the geometrie properties of the electroless plated metal electrode.The validity and accuracy of the model are justified by comparing with the experimental observations of IPMC samples.The differences between model predictions and experimental data of Young's modulus and surface resistance of IPMC samples are+6.8%and-5.5%,respectively,indicating a reasonably good agreement.展开更多
As a new ionic polymer-metal composite(IPMC) for artificial muscle,the mechanical performance parameters and the relationship between the deformation and the electrical parameters of the IPMC were studied. With the di...As a new ionic polymer-metal composite(IPMC) for artificial muscle,the mechanical performance parameters and the relationship between the deformation and the electrical parameters of the IPMC were studied. With the digital speckle correlation method,the constitutive relationship of the IPMC was confirmed. With non-contact photography measurement,a cantilever setup was designed to confirm the relationship between the deformation of the IPMC film and the applied voltage. The relationship curve of tip displacement of the IPMC cantilever setup vs the voltage was achieved. The results indicate that the IPMC is isotropic,its elastic modulus is 232 MPa and Poisson ratio is 0.163. The curve achieved from the test of the tip displacement of the IPMC cantilever setup shows that the tip displacement reaches the maximum when the stimulated voltage is 5 V. And the tip displacement descends largely when the frequency of the applied voltage is between 30 mHz and 100 mHz.展开更多
In order to further improve the driving performance of ionic polymer metal composites(IPMCs),Nafion/graphene quantum dots(GQDs)hybrid membranes incorporating GQDs with various contents of 0,0.1 wt.%,0.5 wt.%,1.0 wt.%,...In order to further improve the driving performance of ionic polymer metal composites(IPMCs),Nafion/graphene quantum dots(GQDs)hybrid membranes incorporating GQDs with various contents of 0,0.1 wt.%,0.5 wt.%,1.0 wt.%,2.0 wt.%and 4.0 wt.%were fabricated by solution casting,and then IPMCs were manufactured by electroless plating.The water contents and elastic moduli of the hybrid membranes were tested.The morphology characteristics of the hybrid membranes and the IPMCs were observed,and the current,AC impedance,blocking force and displacement of the IPMCs were measured.The results show that the elastic modulus of the hybrid membranes decreases,the water content increases,and the actuation performance of the IPMCs improves significantly after the addition of GQDs.IPMC with 1.0 wt.%GQDs exhibits the best driving property.Compared with the IPMC without GQDs,the working current,ion conductivity,blocking force,and tip displacement increase by 94.67%,311.11%,53.66%,and 66.07%,respectively.These results lay a solid foundation for the preparation of IPMCs with high performance,and further broaden their applications in biomedical devices and bionic robots.展开更多
In this study,polyvinyl alcohol(PVA)–ionic liquid(IL) membranes were prepared for the separation of isopropyl alcohol(IPA)–water azeotropic mixtures by pervaporation.PVA-IL composite membranes were prepared by simpl...In this study,polyvinyl alcohol(PVA)–ionic liquid(IL) membranes were prepared for the separation of isopropyl alcohol(IPA)–water azeotropic mixtures by pervaporation.PVA-IL composite membranes were prepared by simple solvent evaporation method using four ILs,viz.,1-n-butyl-3-methylimidazolium chloride(BMIMCl),1-hexyl-3-methylimidazolium chloride(HMIMCl),1-hexyl-3-methylimidazolium tetra fluoroborate(HMIMBF4) and 1-octyl-3-methylimidazolium chloride(OMIMCl).Three ILs were used to study the effect of alkyl chain on the pervaporation performance.The study had focused on the effect feed water concentration from 10%–40%and effect of feed temperature from 50–80°C.Physiochemical properties of all the membranes were studied using Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM) and contact angle measurement.The Arrhenius activation energies for permeation were estimated to be in the range 4–12 kJ·mol-1 from the temperature dependent permeation values.展开更多
This paper develops analytical electromechanical formulas to predict the mechanical deformation of ionic polymer-metal composite (IPMC) cantilever actuators under DC excitation voltages. In this research, IPMC samples...This paper develops analytical electromechanical formulas to predict the mechanical deformation of ionic polymer-metal composite (IPMC) cantilever actuators under DC excitation voltages. In this research, IPMC samples with Pt and Ag electrodes were manufactured, and the large nonlinear deformation and the effect of curvature on surface electrode resistance of the IPMC samples were investigated experimentally and theoretically. A distributed electrical model was modified for calculating the distribution of voltage along the bending actuator. Then an irreversible thermodynamic model that could predict the curvature of a unit part of an IPMC actuator is combined with the electrical model so that an analytical electromechanical model is developed. The electromechanical model is then validated against the experimental results obtained from Pt- and Ag-IPMC actuators under various excitation voltages. The good agreement between the electromechanical model and the actuators shows that the analytical electromechanical model can accurately describe the large nonlinear quasi-static deflection behavior of IPMC actuators.展开更多
In recent years,more and more creatures in nature have become the source of inspiration for people to study bionic soft robots.Many such robots appear in the public’s vision.In this paper,a Venus flytrap robot simila...In recent years,more and more creatures in nature have become the source of inspiration for people to study bionic soft robots.Many such robots appear in the public’s vision.In this paper,a Venus flytrap robot similar to the biological Venus flytrap in appearance was designed and prepared.It was mainly cast by Polydimethylsiloxane(PDMs)and driven by the flexible material of Ionic Polymer Metal Composites(IPMCs).Combining with ANSYS and related experiments,the appropriate voltage and the size of IPMC were determined.The results showed that the performance of the Venus flytrap robot was the closest to the biological Venus flytrap when the size of IPMC length,width and driving voltage reach to 3 cm,1 cm and 5.5 V,respectively.Moreover,the closing speed and angle reached 8.22°/s and 37°,respectively.Finally,the fly traps also could be opened and closed repeatedly and captured a small ball with a mass of 0.3 g firmly in its middle and tip.展开更多
The efficient thickness of a composite electrode for solid oxide fuel cells was directly calculated by developing a physical model taking into account of the charge transfer process, the oxygen ion and electron transp...The efficient thickness of a composite electrode for solid oxide fuel cells was directly calculated by developing a physical model taking into account of the charge transfer process, the oxygen ion and electron transportation, and the microstructure characteristics of the electrode. The efficient thickness, which is defined as the electrode thickness corresponding to the minimum electrode polarization resistance, is formulated as a function of charge transfer resistivity, effective resistivity to ion and electron transport, and three-phase boundary length per unit volume. The model prediction is compared with the experimental reports to check the validity. Simulation is performed to show the effect of microstructure, intrinsic material properties, and electrode reaction mechanism on the efficient thickness. The results suggest that when an electrode is fabricated, its thickness should be controlled regarding its composition, particle size of its components, the intrinsic ionic and electronic conductivities,and its reaction mechanisms as well as the expected operation temperatures. The sensitivity of electrode polarization resistance to its thickness is also discussed.展开更多
Effects of nano-ceramic filler titanium oxide（TiO2） have been investigated on the ionic conductance of polymeric complexes consisting of polyvinyl chloride）（PVC）/poly（ethyl methacrylate）（PEMA）,and lithium per...Effects of nano-ceramic filler titanium oxide（TiO2） have been investigated on the ionic conductance of polymeric complexes consisting of polyvinyl chloride）（PVC）/poly（ethyl methacrylate）（PEMA）,and lithium perchlorate（LiClO4）.The composite polymer blend electrolytes were prepared by solvent casting technique.The TiO2 nanofillers were homogeneously dispersed in the polymer electrolyte matrix and exhibited excellent interconnection with PVC/PEMA/PC/UCIO4 polymer electrolyte.The addition of TiO2nanofillers improved the ionic conductivity of the polymer electrolyte to some extent when the content of TiO2 is 15 wt%.The addition of TiO2 also enhanced the thermal stability of the electrolyte.The changes in the structural and complex formation properties of the materials are studied by X-ray diffraction（XRD） and Fourier transform infrared spectroscopy（FTIR） techniques.The scanning electron microscope image of nano-composite polymer electrolyte membrane confirms that the TiO2 nanoparticles were distributed uniformly in the polymer matrix.展开更多
Dye-sensitized solar cells （DSSCs） are the most promising, low cost and most extensively investigated solar cells. They are famous for their clean and efficient solar energy conversion. Nevertheless this, long-time ...Dye-sensitized solar cells （DSSCs） are the most promising, low cost and most extensively investigated solar cells. They are famous for their clean and efficient solar energy conversion. Nevertheless this, long-time sta- bility is still to be acquired. In recent years research on solid and quasi-solid state electrolytes is extensively in- creased. Various quasi-solid electrolytes, including composites polymer electrolytes, ionic liquid electrolytes, thermoplastic polymer electrolytes and thermosetting polymer electrolytes have been used. Performance and stability of a quasi-solid state electrolyte are between liquid and solid electrolytes. High photovoltaic performances of QS-DSSCs along better long-term stability can be obtained by designing and optimizing quasi-solid electrolytes. It is a prospective candidate for highly efficient and stable DSSCs.展开更多
基金Supported jointly by the China Ministry of Science and Technology Project No. 2001DIA10009the China NSF International Project No. 40121120827.
文摘With the size-resolved aerosol mass and ion composition data obtained at Lin＇an regional atmospheric pollution monitoring station in July 2003, the size distributions of aerosol mass and ionic components, and the correlations between major ion pairs were analyzed. The primary results indicate that in the period of in-situ measurement, the aerosols are mainly composed of fine particles. The mass of aerosols with size less than 2.1 μm accounts for 66% of the total mass of all size ranges, in which about 50% of the mass is contributed by the particles with size less than 0.65 μm. Similar to the size distributions of aerosol mass, the water-soluble ions are mainly concentrated in the size range of 〈0.65 μm, accounting for about 77% of the sum of analyzed ions, and the ions within the range of 〈2.1 μm reach 88%. The sulfate, ammonium, and potassium are the dominant ionic components in fine particles （particle size less than 2.1 μm）. Ion correlation analysis suggests that the sulfates in fine particles are mostly in the compounds of （NH4）2SO4, Na2SO4, and K2SO4, but for submicron particles the sulfates are mainly in the form of （NH4）2SO4.
基金financial support from the National Natural Science Foundation of China(Grant No.U1637101)The Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(1005-ZAG23011).
文摘As a kind of ionic artificial muscle material,Ionic Polymer-Metal Composites(IPMCs)have the advantages of a low drive current,light weight,and significant flexibility.IPMCs are widely used in the fields of biomedicine,soft robots,etc.However,the displacement and blocking force of the traditional sheet-type Nafion-IPMC need to be improved,and it has the limitation of unidirectional actuation.In this paper,a new type of short side chain Aquivion material is used as the polymer in the IPMC.The cylindrical IPMC is prepared by extrusion technology to improve its actuation performance and realize multi-degree-of-freedom motion.In comparison to the traditional Nafion-IPMC,the ion exchange capacity,specific capacitance,and conductivity of Aquivion-IPMC are improved by 28%,27%,and 32%,respectively,and the displacement and blocking force are improved by 57%and 25%,respectively.The cylindrical actuators can be deflected in eight directions.This indicates that Aquivion,as a polymer membrane for IPMC,holds significant application potential.By designing a cylindrical IPMC electrode distribution,the multi-degree-of-freedom deflection of IPMC can be realized.
基金funded by the Russian Science Foundation(RSF),grantNo.24-23-00558,https://rscf.ru/en/project/24-23-00558/(accessed on 04 February 2025).
文摘The development of actuators based on ionic polymers as soft robotics,artificial muscles,and sensors is currently considered one of the most urgent topics.They are lightweight materials,in addition to their high efficiency,and they can be controlled by a low power source.Nevertheless,the most popular ionic polymers are derived from fossil-based resources.Hence,it is now deemed crucial to produce these actuators using sustainable materials.In this review,the use of ionic polymeric materials as actuators is reviewed through the emphasis on their role in the domain of renewablematerials.The reviewencompasses recent advancements inmaterial formulation and performance enhancement,alongside a comparative analysis with conventional actuator systems.It was found that renewable polymeric actuators based on ionic gels and conductive polymers are easier to prepare compared to ionic polymermetal composites.In addition,the proportion of actuator manufacturing utilizing renewable materials rose to 90%,particularly for ion gel actuators,which was related to the possibility of using renewable polymers as ionic or conductive substances.Moreover,the possible improvements in biopolymeric actuators will experience an annual rise of at least 10%over the next decade,correlating with the growth of their market,which aligns with the worldwide goal of reducing global warming.Additionally,compared to fossil-derived polymers,the decomposition rate of renewable materials reaches 100%,while biodegradable fossil-based substances can exceed 60%within several weeks.Ultimately,this review aims to elucidate the potential of ionic polymeric materials as a viable and sustainable solution for future actuator technologies.
基金Project(51071014)supported by the National Natural Science Foundation of ChinaProject(2010ZE51055)supported by the Aviation Science Foundation of China
文摘In order to study the electrodeposition process of iridium in composite ionic liquid, the effects of N, N-dimethylacetamide（DMAC） on the viscosity, conductivity and electrochemical stability of composite ionic liquid BMIC-BMIBF4, as well as the electrochemical behavior of Ir Cl3 in this system were studied. Iridium（Ir） coatings were deposited at different constant potentials and characterized by SEM and XRD. The results show that the addition of DMAC can evidently decrease the viscosity of the composite system, increase conductivity and improve electrochemical stability of the composite system. Cyclic voltammograms of a Au electrode illustrate that the process controlled by diffusion rate is irreversible with the average charge transfer coefficient of 0.170 and average diffusion coefficient of 1.096×10-6 cm^2/s. In addition, SEM image shows that Ir film deposited at the reduction peak potential is dense and even, while XRD pattern shows that Ir deposit is polycrystalline structure.
基金financial supportfrom the National Natural Science Foundation of China(Grant Nos.51605220,U1637101)the Jiangsu Province NaturalScience Foundation(GrantNo.BK20160793)。
文摘Recently,researchers have concentrated on studying ionic polymer metal composite(IPMC)artificial muscle,which has numerous advantages including a relatively large strain under low input voltage,flexibility,high response,low noise,light weight,and high driving energy density.This paper reports recent developments in IPMC artificial muscle,including improvement methods,modeling,and applications.Different types of IPMCs are described,along with various methods for overcoming some shortcomings,including improvement of Nafion matrix membranes,surface preparation of Nafion membranes,the choice of high-performing electrodes,and new electro-active polymers for enhancing the properties of IPMCs.IPMC models are also reviewed,providing theoretical guidance for studying the performance and applications of IPMCs.Successful applications such as bio-inspired robots,opto-mechatronic systems,and medical engineering are discussed.
基金supported by the National Natural Science Foundation of China(51872027)the Fundamental Research Funds for the Central Universities(FRF-TP-20-014A2)。
文摘All-solid-state lithium batteries(ASSLBs) employing sulfide electrolyte and lithium(Li) anode have received increasing attention due to the intrinsic safety and high energy density.However,the thick electrolyte layer and lithium dendrites formed at the electrolyte/Li anode interface hinder the realization of high-performance ASSLBs.Herein,a novel membrane consisting of Li_(6)PS_(5) Cl(LPSCl),poly(ethylene oxide)(PEO) and Li-salt(LiTFSI) was prepared as sulfide-based composite solid electrolyte(LPSCl-PEO3-LiTFSI)(LPSCl:PEO=97:3 wt/wt;EO:Li=8:1 mol/mol),which delivers high ionic conductivity(1.1 × 10^(-3) S cm^(-1)) and wide electrochemical window(4.9 V vs.Li^(+)/Li) at 25 ℃.In addition,an ex-situ artificial solid electrolyte interphase(SEI) film enriched with LiF and Li3 N was designed as a protective layer on Li anode(Li(SEI)) to suppress the growth of lithium dendrites.Benefiting from the synergy of sulfide-based composite solid electrolyte and ex-situ artificial SEI,cells of S-CNTs/LPSCI-PEO3-LiTFSI/Li(SEI) and Al_(2)O_(3)@LiNi_(0.5)Co_(0.3)Mn_(0.2)O_(2)/LPSCl-PEO3-LiTFSI/Li(SEI) are assembled and both exhibit high initial discharge capacity of 1221.1 mAh g^(-1)(135.8 mAh g^(-1)) and enhanced cycling stability with 81.6% capacity retention over 200 cycles at 0.05 C(89.2% over 100 cycles at 0.1 C).This work provides a new insight into the synergy of composite solid electrolyte and artificial SEI for achieving high-performance ASSLBs.
基金Project(51275102)supported by the National Natural Science Foundation of ChinaProject(HEUCF140713)supported by the Fundamental Research Funds for the Central Universities,China
文摘Based on the biological prototype characteristics of shark’s gill jet orifice,the flexible driving characteristics of ionic exchange polymer metal composites(IPMC)artificial muscle materials and the use of sleeve flexible connector,the IPMC linear driving unit simulation model is built and the IPMC material-driving dynamic control structure of bionic gill unit is developed.Meanwhile,through the stress analysis of bionic gill plate and the motion simulation of bionic gill unit,it is verified that various dynamic control and active control of the jet orifice under the condition of different mainstream field velocities will be taken by using IPMC material-driving.Moreover,the large-deflection deformation of bionic gill plate under dynamic pressure and the comparative analysis with that of a rigid gill plate is studied,leading to the achievement of approximate revised modifier from real value to theoretical value of the displacement control of IPMC.
基金supported by the National Natural Science Foundation of China[Grant Nos.11372132 and 11502109].
文摘A new model is proposed to estimate Young's modulus and surface electrode resistance of the ionic polymer-metai composite(IPMC)with a gradient distribution of micros true ture.The entire IPMC electrode is divided into two parts,i.e.,the porous metal electrode and the gradient polymer-metai composite electrode,according to the geometrie properties of the electroless plated metal electrode.The validity and accuracy of the model are justified by comparing with the experimental observations of IPMC samples.The differences between model predictions and experimental data of Young's modulus and surface resistance of IPMC samples are+6.8%and-5.5%,respectively,indicating a reasonably good agreement.
基金Project(50575228) supported by the National Natural Science Foundation of ChinaProject(07JJ3089) supported by the Hunan Provincial Natural Science Foundation of China
文摘As a new ionic polymer-metal composite(IPMC) for artificial muscle,the mechanical performance parameters and the relationship between the deformation and the electrical parameters of the IPMC were studied. With the digital speckle correlation method,the constitutive relationship of the IPMC was confirmed. With non-contact photography measurement,a cantilever setup was designed to confirm the relationship between the deformation of the IPMC film and the applied voltage. The relationship curve of tip displacement of the IPMC cantilever setup vs the voltage was achieved. The results indicate that the IPMC is isotropic,its elastic modulus is 232 MPa and Poisson ratio is 0.163. The curve achieved from the test of the tip displacement of the IPMC cantilever setup shows that the tip displacement reaches the maximum when the stimulated voltage is 5 V. And the tip displacement descends largely when the frequency of the applied voltage is between 30 mHz and 100 mHz.
基金Projects(51605220,U1637101)supported by the National Natural Science Foundation of ChinaProject(BK20160793)supported by the Jiangsu Provincial Natural Science Foundation,ChinaProject(NS2020029)supported by the Fundamental Research Funds for the Central Universities,China。
文摘In order to further improve the driving performance of ionic polymer metal composites(IPMCs),Nafion/graphene quantum dots(GQDs)hybrid membranes incorporating GQDs with various contents of 0,0.1 wt.%,0.5 wt.%,1.0 wt.%,2.0 wt.%and 4.0 wt.%were fabricated by solution casting,and then IPMCs were manufactured by electroless plating.The water contents and elastic moduli of the hybrid membranes were tested.The morphology characteristics of the hybrid membranes and the IPMCs were observed,and the current,AC impedance,blocking force and displacement of the IPMCs were measured.The results show that the elastic modulus of the hybrid membranes decreases,the water content increases,and the actuation performance of the IPMCs improves significantly after the addition of GQDs.IPMC with 1.0 wt.%GQDs exhibits the best driving property.Compared with the IPMC without GQDs,the working current,ion conductivity,blocking force,and tip displacement increase by 94.67%,311.11%,53.66%,and 66.07%,respectively.These results lay a solid foundation for the preparation of IPMCs with high performance,and further broaden their applications in biomedical devices and bionic robots.
文摘In this study,polyvinyl alcohol(PVA)–ionic liquid(IL) membranes were prepared for the separation of isopropyl alcohol(IPA)–water azeotropic mixtures by pervaporation.PVA-IL composite membranes were prepared by simple solvent evaporation method using four ILs,viz.,1-n-butyl-3-methylimidazolium chloride(BMIMCl),1-hexyl-3-methylimidazolium chloride(HMIMCl),1-hexyl-3-methylimidazolium tetra fluoroborate(HMIMBF4) and 1-octyl-3-methylimidazolium chloride(OMIMCl).Three ILs were used to study the effect of alkyl chain on the pervaporation performance.The study had focused on the effect feed water concentration from 10%–40%and effect of feed temperature from 50–80°C.Physiochemical properties of all the membranes were studied using Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM) and contact angle measurement.The Arrhenius activation energies for permeation were estimated to be in the range 4–12 kJ·mol-1 from the temperature dependent permeation values.
基金project was supported by the National Natural Science Foundation of China (Grants 11372132, 11502109)
文摘This paper develops analytical electromechanical formulas to predict the mechanical deformation of ionic polymer-metal composite (IPMC) cantilever actuators under DC excitation voltages. In this research, IPMC samples with Pt and Ag electrodes were manufactured, and the large nonlinear deformation and the effect of curvature on surface electrode resistance of the IPMC samples were investigated experimentally and theoretically. A distributed electrical model was modified for calculating the distribution of voltage along the bending actuator. Then an irreversible thermodynamic model that could predict the curvature of a unit part of an IPMC actuator is combined with the electrical model so that an analytical electromechanical model is developed. The electromechanical model is then validated against the experimental results obtained from Pt- and Ag-IPMC actuators under various excitation voltages. The good agreement between the electromechanical model and the actuators shows that the analytical electromechanical model can accurately describe the large nonlinear quasi-static deflection behavior of IPMC actuators.
基金financial assistance from the Key Laboratory Project of Expressway Construction Machinery of Shaanxi Province,China(300102259510)the Key Research and Development Program of Shaanxi Province,China(2018ZDXM-GY-088)+1 种基金Analysis and compensation friction error of inclined installation feed system for NC machine tools,China(17JK0509)Study on mechanism and suppression strategy of friction error for CNC machine tools,China(2017JM5042).
文摘In recent years,more and more creatures in nature have become the source of inspiration for people to study bionic soft robots.Many such robots appear in the public’s vision.In this paper,a Venus flytrap robot similar to the biological Venus flytrap in appearance was designed and prepared.It was mainly cast by Polydimethylsiloxane(PDMs)and driven by the flexible material of Ionic Polymer Metal Composites(IPMCs).Combining with ANSYS and related experiments,the appropriate voltage and the size of IPMC were determined.The results showed that the performance of the Venus flytrap robot was the closest to the biological Venus flytrap when the size of IPMC length,width and driving voltage reach to 3 cm,1 cm and 5.5 V,respectively.Moreover,the closing speed and angle reached 8.22°/s and 37°,respectively.Finally,the fly traps also could be opened and closed repeatedly and captured a small ball with a mass of 0.3 g firmly in its middle and tip.
文摘The efficient thickness of a composite electrode for solid oxide fuel cells was directly calculated by developing a physical model taking into account of the charge transfer process, the oxygen ion and electron transportation, and the microstructure characteristics of the electrode. The efficient thickness, which is defined as the electrode thickness corresponding to the minimum electrode polarization resistance, is formulated as a function of charge transfer resistivity, effective resistivity to ion and electron transport, and three-phase boundary length per unit volume. The model prediction is compared with the experimental reports to check the validity. Simulation is performed to show the effect of microstructure, intrinsic material properties, and electrode reaction mechanism on the efficient thickness. The results suggest that when an electrode is fabricated, its thickness should be controlled regarding its composition, particle size of its components, the intrinsic ionic and electronic conductivities,and its reaction mechanisms as well as the expected operation temperatures. The sensitivity of electrode polarization resistance to its thickness is also discussed.
基金the UGC,New Delhi,India for providing financial support to carry out this work
文摘Effects of nano-ceramic filler titanium oxide（TiO2） have been investigated on the ionic conductance of polymeric complexes consisting of polyvinyl chloride）（PVC）/poly（ethyl methacrylate）（PEMA）,and lithium perchlorate（LiClO4）.The composite polymer blend electrolytes were prepared by solvent casting technique.The TiO2 nanofillers were homogeneously dispersed in the polymer electrolyte matrix and exhibited excellent interconnection with PVC/PEMA/PC/UCIO4 polymer electrolyte.The addition of TiO2nanofillers improved the ionic conductivity of the polymer electrolyte to some extent when the content of TiO2 is 15 wt%.The addition of TiO2 also enhanced the thermal stability of the electrolyte.The changes in the structural and complex formation properties of the materials are studied by X-ray diffraction（XRD） and Fourier transform infrared spectroscopy（FTIR） techniques.The scanning electron microscope image of nano-composite polymer electrolyte membrane confirms that the TiO2 nanoparticles were distributed uniformly in the polymer matrix.
文摘Dye-sensitized solar cells （DSSCs） are the most promising, low cost and most extensively investigated solar cells. They are famous for their clean and efficient solar energy conversion. Nevertheless this, long-time sta- bility is still to be acquired. In recent years research on solid and quasi-solid state electrolytes is extensively in- creased. Various quasi-solid electrolytes, including composites polymer electrolytes, ionic liquid electrolytes, thermoplastic polymer electrolytes and thermosetting polymer electrolytes have been used. Performance and stability of a quasi-solid state electrolyte are between liquid and solid electrolytes. High photovoltaic performances of QS-DSSCs along better long-term stability can be obtained by designing and optimizing quasi-solid electrolytes. It is a prospective candidate for highly efficient and stable DSSCs.
