Inorganic CsPbI_(3)perovskite with superior thermal stability and photoelectric properties has developed into a promising candidate for photovoltaic applications.Nevertheless,the power conversion efficiency(PCE)of CsP...Inorganic CsPbI_(3)perovskite with superior thermal stability and photoelectric properties has developed into a promising candidate for photovoltaic applications.Nevertheless,the power conversion efficiency(PCE)of CsPbI_(3)perovskite solar cells(PSCs)still lags far behind that of both organic-inorganic hybrid counterparts and the theoretical PCE limit,primarily restricted by severe fill factor(FF)and opencircuit voltage(VOC)deficits.Herein,an in-situ self-crosslinking strategy is proposed to construct high-performance inverted inorganic PSCs by incorporating acrylate monomers as additives into CsPbI_(3)perovskite precursors.During the thermal annealing process of perovskite films,acrylate monomers can form network structures by breaking the C=C groups through an in-situ polymerization reaction,mainly anchored at the grain boundaries(GBs)and on the surfaces of perovskite.Meanwhile,the C=O groups of acrylate polymers can favorably coordinate with uncoordinated Pb^(2+),thereby decreasing defect density and stabilizing the perovskite phase.Particularly,with multiple crosslinking and passivation sites,the incorporation of dipentaerythritol pentaacrylate(DPHA)can effectively improve the perovskite film quality,suppress nonradiative recombination,and block moisture erosion.Consequently,the DPHAbased PSC achieves a champion PCE of 20.05%with a record-high FF of 85.05%,both of which rank among the top in the performance of inverted CsPbI_(3)PSCs.Moreover,the unencapsulated DPHA-based device exhibits negligible hysteresis,remarkably improved long-term storage,and operational stability.This work offers a facile and useful strategy to simultaneously promote the efficiency and device stability of inverted inorganic PSCs.展开更多
The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells(IPSCs),which reduces the...The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells(IPSCs),which reduces the defect formation energy.Here,a flexible molecule 5-maleimidovaleric acid(5-MVA)was introduced as a strain buffer to release the residual strain of CsPbI_(2.85)Br_(0.15)perovskite.Maleic anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb^(2+)through Lewis acid-base reaction,thus tightly“pull”the perovskite lattice.The in-between soft carbon chain increased the structural flexibility of CsPbI_(2.85)Br_(0.15)perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI_(2.85)Br_(0.15),resisted the corrosion of external strain,and also reduced the formation of defects such as VIand Pb0.In addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level barriers.Eventually,power conversion efficiency(PCE)of NiOxbased inverted IPSCs increased from 19.25%to 20.82%with the open-circuit voltage enhanced from 1.164 V to 1.230 V.The release of strain also improved the stability of CsPbI_(2.85)Br_(0.15)perovskite films and devices.展开更多
Self-assembled monolayers(SAMs),owing to their amphiphilic nature,tend to aggregate,which impedes the formation of a dense and uniform SAM on the substrate.Additionally,the weak adsorption ability of SAMs on the indiu...Self-assembled monolayers(SAMs),owing to their amphiphilic nature,tend to aggregate,which impedes the formation of a dense and uniform SAM on the substrate.Additionally,the weak adsorption ability of SAMs on the indium tin oxide(ITO)surface and the desorption of hydroxyl(OH)from the ITO surface induced by polar solvents can lead to the formation of vacancies.Herein,a dimethylacridine-based SAM is incorporated into the perovskite precursor solution.This SAM can be extruded from the precursor solution and enriched on the bottom surface of the perovskite,filling the vacancies and in situ forming a mixed SAM with MeO-2PACz as a hole-selective layer(HSL).The in situ formed mixed SAM optimizes the energy level alignment between the HSL and the perovskite,facilitating hole extraction and alleviating the residual strain of the perovskite film.Consequently,the perovskite solar cells(PSCs),based on the mixed SAM,achieve a power conversion efficiency(PCE)of 25.69%and exhibit excellent operational stability.When this approach is applied to 1.78 eV bandgap PSC devices,it yields a PCE of 20.08%.This work presents a unique strategy for fabricating both high-quality perovskite films and superior buried interfaces,which is also applicable to wide-bandgap PSCs.展开更多
Support and maintenance of tunnel excavations during operation are critical to ensure the safety and stability of tunnels.This study proposes a specialized support technology for a railroad tunnel in western China,cha...Support and maintenance of tunnel excavations during operation are critical to ensure the safety and stability of tunnels.This study proposes a specialized support technology for a railroad tunnel in western China,characterized by substantial deformation and a limited inherent self-stabilizing capacity.The method involves the application of a foam concrete compressible layer at the inverted arch of the tunnel.The effectiveness of the foam concrete layer in mitigating the effect of the surrounding rock on the tunnel inverted arch structure is investigated by a combination of indoor tests and numerical simulations.The laboratory test results show that the train load has little effect on the compressive performance of the foamed concrete compressible layer,which indicates that the foamed concrete compressible layer can be applied in the tunnel invert.By analyzing the support effect of the established model,it is found that the foam concrete compressible layer can effectively absorb the deformation pressure generated by the surrounding rock and protect the secondary lining structure,when the compressible layer density is 500 kg/m^(3) and the thickness is set to 20 cm,the supporting effect is the best.展开更多
The 2D/3D heterojunction perovskites have garnered increasing attention due to their exceptional moisture and thermal stability.However,few works have paid attention to the influence of the subsequent change process o...The 2D/3D heterojunction perovskites have garnered increasing attention due to their exceptional moisture and thermal stability.However,few works have paid attention to the influence of the subsequent change process of 2D/3D heterojunction PSC on the stability of PSCs.Moreover,the evolution of the interface and carrier dynamic behavior of the 2D/3D perovskite films with long-term operation has not been systematically developed befo re.In this work,the effects of 2D/3 D heterojunction evolution on the interface of perovskite films and different carrier dynamics during 2D/3D evolution are systematically analyzed for the first time.The decomposition of 2D/3D heterojunction in the perovskite film will have a certain impact on the surface and carrier dynamics behavior of perovskite.During the evolution of 2D/3D heterojunction,PbI_(2)crystals will appear,which will improve the interfacial energy level matching between the electron transport layer and perovskite film.With a long evolution time,some holes will appear on the surface of perovskite film.The open circuit voltage(V_(OC))of PSCs increased from 1.14 to1.18 V and the PCE increased to 23.21%after 300 h storage in the nitrogen atmosphere,and maintained 89%initial performance for with 3000 h stability test in N_(2)box.This discovery has a significant role in promoting the development of inverted heterojunction PSCs and constructing the revolution mechanism of charge carrier dynamic.展开更多
The stability of perovskite solar cells(PSCs)is adversely affected by nonradiative recombination resulting from buried interface defects.Herein,we synthesize a polyionic liquid,poly(p-vinylbenzyl trimethylam-monium he...The stability of perovskite solar cells(PSCs)is adversely affected by nonradiative recombination resulting from buried interface defects.Herein,we synthesize a polyionic liquid,poly(p-vinylbenzyl trimethylam-monium hexafluorophosphate)(PTA),and introduce it into the buried interface of PSCs.The quaternary ammonium cation(N(-CH_(3))^(3+))in PTA can fill the vacancies of organic cations within the perovskite structure and reduce shallow energy level defects.Additionally,the hexafluorophosphate(PF6−)in PTA forms a Lewis acid-base interaction with Pb^(2+)in the perovskite layer,effectively passivating deep en-ergy level defects.Furthermore,hydrogen bonding can be established between organic cations and the PF6−anion,preventing the formation of shallow energy level defects.Through this synergistic mecha-nism,the deep and shallow energy level defects are effectively mitigated,resulting in improved device performance.As a result,the resulting treated inverted PSC exhibits an impressive power conversion ef-ficiency(PCE)of 24.72%.Notably,the PTA-treated PSCs exhibit remarkable stability,with 88.5%of the original PCE retained after undergoing heat aging at 85℃ for 1078 h,and 89.1%of the initial PCE main-tained following continuous exposure to light for 1100 h at the maximum power point.Synergistically suppressing multiple defects at the buried interface through the use of polyionic liquids is a promising way to improve the commercial viability of PSCs.展开更多
In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the p...In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the pendulum arms in the upright position and the car to reach the equilibrium position.Grey Wolf Optimization-based Linear Quadratic Regulator(GWO-LQR)and GWO-based Fuzzy LQR(FLQR)control algorithms are used in the control process.To improve the performance of the LQR and FLQR methods,the optimum values of the coefficients corresponding to the foot points of the membership functions are determined by the GWO algorithm.Both a graphic and a numerical analysis of the outcomes are provided.In the comparative analysis,it is observed that the GWO-based FLQR method reduces the settling time by 22.58% and the maximum peak value by 18.2% when evaluated in terms of the angular response of the pendulum arm.Furthermore,this approach outperformed comparable research in the literature with a settling time of 2.4 s.These findings demonstrate that the suggested GWO-based FLQR controlmethod outperforms existing literature in terms of the time required for the pendulum arm to reach equilibrium.展开更多
Accurate forecasting of blast furnace gas(BFG)production is an essential prerequisite for reasonable energy scheduling and management to reduce carbon emissions.Coupling forecasting between BFG generation and consumpt...Accurate forecasting of blast furnace gas(BFG)production is an essential prerequisite for reasonable energy scheduling and management to reduce carbon emissions.Coupling forecasting between BFG generation and consumption dynamics was taken as the research object.A multi-task learning(MTL)method for BFG forecasting was proposed,which integrated a coupling correlation coefficient(CCC)and an inverted transformer structure.The CCC method could enhance key information extraction by establishing relationships between multiple prediction targets and relevant factors,while MTL effectively captured the inherent correlations between BFG generation and consumption.Finally,a real-world case study was conducted to compare the proposed model with four benchmark models.Results indicated significant reductions in average mean absolute percentage error by 33.37%,achieving 1.92%,with a computational time of 76 s.The sensitivity analysis of hyperparameters such as learning rate,batch size,and units of the long short-term memory layer highlights the importance of hyperparameter tuning.展开更多
Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivati...Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivation defects.However,the stability of the SAM molecules,the stability of the molecular anchoring conformation,and the impact on the stability of subsequent PSCs have not been clearly elucidated.In this review,we systematically discussed the intrinsic connection between the molecular conformation(including anchoring groups,spacer groups,and terminal groups)and the stability of SAMs.Sequentially,the research progress of SAMs as HSLs in improving the stability of PSCs is summarized,including photostability,thermal stability,ion migration,and residual stress.Finally,we look forward to the shortcomings and possible challenges of using SAMs as HSLs for inverted PSCs.展开更多
We use out-of-time order correlators(OTOCs)to investigate the quantum instability and Ehrenfest time for an inverted harmonic oscillator(IHO).For initial states located in the stable manifolds of the IHO we find that ...We use out-of-time order correlators(OTOCs)to investigate the quantum instability and Ehrenfest time for an inverted harmonic oscillator(IHO).For initial states located in the stable manifolds of the IHO we find that the corresponding OTOC exhibits identical evolutionary characteristics to the saddle point before the Ehrenfest time.For initial states located in the unstable manifolds,the OTOCs still grow exponentially but the time to maintain exponential growth is related to the center position of its wave packet in phase space.Moreover,we use the Husimi Q function to visualize the quantum wave packets during exponential growth of the OTOCs.Our results show that quantum instability exists at arbitrary orbits in the IHO system,and the Ehrenfest time in the IHO system depends not only on the photon number of the initial system but also on the central positions of the initial states in phase space.展开更多
AIM:To evaluate the surgical outcomes of the perfluorocarbon liquid(PFCL)-assisted inverted multilayer internal limiting membrane(ILM)flaps covering technique in macular hole retinal detachment(MHRD)in high myopia wit...AIM:To evaluate the surgical outcomes of the perfluorocarbon liquid(PFCL)-assisted inverted multilayer internal limiting membrane(ILM)flaps covering technique in macular hole retinal detachment(MHRD)in high myopia with axial length(AL)≥30 mm.METHODS:In this retrospective,interventional,consecutive comparative study,44 MHRD eyes were divided into two groups:the PFCL-assisted inverted multilayer ILM flaps covering technique group(Group 1,21 eyes)and the ILM peeling group(Group 2,23 eyes).The follow-up period was>12mo.Postoperative outcomes,including retinal reattachment,macular hole(MH)closure,and bestcorrected visual acuity(BCVA),were assessed.Statistical analysis using the Mann–Whitney U test and Fisher’s exact test was conducted to compare differences between groups.RESULTS:There were no statistically significant differences in baseline preoperative clinical characteristics,including age,sex,AL,diopters,duration of symptom,lens status,posterior staphyloma presence and extent of RD.Retinal reattachment rates were higher in Group 1(90.5%)than in Group 2(82.6%),without statistical significance(P=0.667).MH closure rates were significantly higher in Group 1(85.7%)than in Group 2(17.4%;P<0.001).The Group-1 BCVA(logMAR)improved significantly from 2.13±0.91 preoperatively to 1.21±0.66 postoperatively(P=0.026).The Group 2 BCVA improved significantly from 1.91±0.53 preoperatively to 1.19±0.41 postoperatively(P=0.032).However,there were no significant differences in visual-acuity improvement between groups(P=0.460).CONCLUSION:This technique offers a more effective approach for improving MH closure rates and postoperative visual function in MHRD with AL≥30 mm in high myopia.展开更多
Flexible perovskite solar cells(fPSCs)have demonstrated commercial viability because of their promising lightness,flexibility,and low-cost advantages.However,in most applications,the fPSCs suffer from constant externa...Flexible perovskite solar cells(fPSCs)have demonstrated commercial viability because of their promising lightness,flexibility,and low-cost advantages.However,in most applications,the fPSCs suffer from constant external stress,such as being kept at a convex bending state,imposing external stress on the brittle perovskite films and causing the fPSCs long-term stability problems.Overcoming these issues is vital.Herein,we propose an effective way to enhance the stability of the fPSCs under convex bending by modulating the residual stress of perovskite film for the first time.Specifically,we have carefully designed a synergistic strain engineering to toughen the perovskite films by introducing 1-butyl-3-methylimidazolium tetrafluoroborate,citric acid,and a novel cross-linker,5-(1,2-dithiolan-3-yl)pentanoate into perovskite films simultaneously.Besides passivating the perovskite films,the multiple additives effectively convert the residual stress within the perovskite films from tensile to compressive type to alleviate the detrimental impact of bending on the flexible perovskite films.As a result,the optimal efficiencies of triple-additive modified fPSCs have achieved 22.19%(0.06 cm^(2))and 19.44%(1.02 cm^(2)).More importantly,the strategy could significantly improve the stability of the perovskite films and fPSCs at a convex bending state.Our approach is inductive for the future practical field applications of high-performance fPSCs.展开更多
The insect mitogenome is typically a compact circular molecule with highly conserved gene contents.Nonetheless,mitogenome structural variations have been reported in specific taxa,and gene rearrangements,usually the t...The insect mitogenome is typically a compact circular molecule with highly conserved gene contents.Nonetheless,mitogenome structural variations have been reported in specific taxa,and gene rearrangements,usually the tRNAs,occur in different lineages.Because synapomorphies of mitogenome organizations can provide information for phylogenetic inferences,comparative analyses of mitogenomes have been given increasing attention.However,most studies use a very few species to represent the whole genus,tribe,family,or even order,overlooking potential variations at lower taxonomic levels,which might lead to some incorrect inferences.To provide new insights into mitogenome organizations and their implications for phylogenetic inference,this study conducted comparative analyses for mitogenomes of three social bee tribes(Meliponini,Bombini,and Apini)based on the phylogenetic framework with denser taxonomic sampling at the species and population levels.Comparative analyses revealed that mitogenomes of Apini and Bombini are the typical type,while those of Meliponini show diverse variations in mitogenome sizes and organizations.Large inverted repeats(IRs)cause significant gene rearrangements of protein coding genes(PCGs)and rRNAs in Indo-Malay/Australian stingless bee species.Molecular evolution analyses showed that the lineage with IRs have lower dN/dS ratios for PCGs than lineages without IRs,indicating potential effects of IRs on the evolution of mitochondrial genes.The finding of IRs and different patterns of gene rearrangements suggested that Meliponini is a hotspot in mitogenome evolution.Unlike conserved PCGs and rRNAs whose rearrangements were found only in the mentioned lineages within Meliponini,tRNA rearrangements are common across all three tribes of social bees,and are significant even at the species level,indicating that comprehensive sampling is needed to fully understand the patterns of tRNA rearrangements,and their implications for phylogenetic inference.展开更多
This paper proposes an explicit scheme to analyze the failure of a subsea polyhedral tunnel-liner system with an inverted arch under mechanical loading and fire fields.The thin-walled liner is made of Functionally Gra...This paper proposes an explicit scheme to analyze the failure of a subsea polyhedral tunnel-liner system with an inverted arch under mechanical loading and fire fields.The thin-walled liner is made of Functionally Graded Materials(FGMs),which may improve the stability behavior of the tunnel-liner system.Hydrostatic pressure is inevitable in the liner since underground water may penetrate the cracks of the tunnel,and reach the outer surface of the liner.In addition,an elevated temperature loading is taken into account,considering that fire may occur in the tunnel-liner system.Under the combination of mechanical loading and thermal loading,the liner deforms into a single-lobe shape,which is depicted by a trigonometric function.The total potential energy is expressed quantitatively after the energy approach and thin-walled shell theory are used.The minimum potential energy is obtained when the critical buckling occurs.The critical buckling pressure is calculated,which considers the effect of the thermal field.The present analytical prediction is subsequently compared precisely with other closed-form solutions.Finally,the effects of several parameters,such as the geometric shapes,temperature variations,and volume fraction indices,are discussed to further survey the buckling performance of the nonlinear buckling of an FGM polyhedral liner with an inverted arch.One may address a polyhedral liner with fewer polyhedral sides,and a lower volume fraction index is recommended to rehabilitate cracked tunnels in engineering applications.展开更多
Metal oxide charge transport materials are preferable for realizing long-term stable and potentially low-cost perovskite solar cells(PSCs).However,due to some technical difficulties(e.g.,intricate fabrication protocol...Metal oxide charge transport materials are preferable for realizing long-term stable and potentially low-cost perovskite solar cells(PSCs).However,due to some technical difficulties(e.g.,intricate fabrication protocols,high-temperature heating process,incompatible solvents,etc.),it is still challenging to achieve efficient and reliable all-metal-oxide-based devices.Here,we developed efficient inverted PSCs(IPSCs)based on solution-processed nickel oxide(NiO_(x))and tin oxide(SnO_(2))nanoparticles,working as hole and electron transport materials respectively,enabling a fast and balanced charge transfer for photogenerated charge carriers.Through further understanding and optimizing the perovskite/metal oxide interfaces,we have realized an outstanding power conversion efficiency(PCE)of 23.5%(the bandgap of the perovskite is 1.62 eV),which is the highest efficiency among IPSCs based on all-metal-oxide charge transport materials.Thanks to these stable metal oxides and improved interface properties,ambient stability(retaining 95%of initial PCE after 1 month),thermal stability(retaining 80%of initial PCE after 2 weeks)and light stability(retaining 90%of initial PCE after 1000 hours aging)of resultant devices are enhanced significantly.In addition,owing to the low-temperature fabrication procedures of the entire device,we have obtained a PCE of over 21%for flexible IPSCs with enhanced operational stability.展开更多
An inverted asphalt pavement is created by reversing the sequence of the lower and middle layers in a conventional asphalt pavement. The lower layer is composed of material with larger particle size and lower asphalt ...An inverted asphalt pavement is created by reversing the sequence of the lower and middle layers in a conventional asphalt pavement. The lower layer is composed of material with larger particle size and lower asphalt content, which improves its ability to withstand deformation caused by rutting. On the other hand, the middle surface has a higher asphalt content, specifically designed to resist fatigue cracking. This paper examines the mechanical response of two pavement structures and investigates the potential of two measures, inverted asphalt pavement and asphalt mixture design by vertical vibration compaction method(VVCM), in reducing stresses and stress levels in asphalt pavements. Additionally, a large thickness rutting and fatigue test method was developed to study the rutting resistance and fatigue life of the pavement structures, and to construct rutting deformation and fatigue life prediction models. Finally, test sections were paved to verify the feasibility of the inverted pavement and VVCM materials. The findings show that inverted pavement and VVCM materials have a minimal impact on pavement stress, but can reduce pavement shear and tensile stress levels by up to 18%–25%.Furthermore, inverted pavement and VVCM materials have positive effects on improving the rutting resistance and fatigue life of asphalt pavements.展开更多
Wide-bandgap perovskite solar cells(WBG PSCs)have garnered significant research attention for their potential in tandem solar cells.However,they face challenges such as high open-circuit voltage losses and severe phas...Wide-bandgap perovskite solar cells(WBG PSCs)have garnered significant research attention for their potential in tandem solar cells.However,they face challenges such as high open-circuit voltage losses and severe phase instability.These issues are primarily owing to the formation of defects,ion migration,and energy level mismatches at the interface of WBG perovskite devices.Meanwhile,inverted PSCs demonstrate superior stability potential and compatibility with tandem devices,making them the most promising application for WBG perovskite materials.Consequently,interface modulation for such devices has become imperative.In this review,from the perspective of applicability in tandem devices,we first provided a concise overview of WBG perovskite research and its efficiency progress in inverted devices.We further discussed interface carrier dynamics and the potential impact of interfaces on such device performance.Afterward,we presented a comprehensive summary of interface engineering in inverted WBG perovskite(1.60 eV-1.80 eV)solar cells.The research particularly explored both the upper and buried interfaces of WBG absorbers in the inverted PSCs,thoroughly investigating interface design strategies and outlining promising research directions.Finally,this review provides insight into the future development of interface engineering for high-performance and large-area WBG PSCs.展开更多
A novel inverted generalized gamma(IGG)distribution,proposed for data modelling with an upside-down bathtub hazard rate,is considered.In many real-world practical situations,when a researcher wants to conduct a compar...A novel inverted generalized gamma(IGG)distribution,proposed for data modelling with an upside-down bathtub hazard rate,is considered.In many real-world practical situations,when a researcher wants to conduct a comparative study of the life testing of items based on cost and duration of testing,censoring strategies are frequently used.From this point of view,in the presence of censored data compiled from the most well-known progressively Type-Ⅱ censoring technique,this study examines different parameters of the IGG distribution.From a classical point of view,the likelihood and product of spacing estimation methods are considered.Observed Fisher information and the deltamethod are used to obtain the approximate confidence intervals for any unknown parametric function of the suggestedmodel.In the Bayesian paradigm,the same traditional inferential approaches are used to estimate all unknown subjects.Markov-Chain with Monte-Carlo steps are considered to approximate all Bayes’findings.Extensive numerical comparisons are presented to examine the performance of the proposed methodologies using various criteria of accuracy.Further,using several optimality criteria,the optimumprogressive censoring design is suggested.To highlight how the proposed estimators can be used in practice and to verify the flexibility of the proposed model,we analyze the failure times of twenty mechanical components of a diesel engine.展开更多
A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells.The control of forming uniform and large-area film and perovskite crystallization is still the mai...A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells.The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs.In this work,we adopted a solid-liquid two-step film formation technique,which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films.This method possesses the advantages of integrating vapor deposition and solution methods,which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform,large-area perovskite film.Furthermore,modification of the NiO_(x)/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization.As a result,a large-area perovskite film possessing larger grains,fewer pinholes,and reduced defects could be achieved.The inverted PSM with an active area of 61.56 cm^(2)(10×10 cm^(2)substrate)achieved a champion power conversion efficiency of 20.56%and significantly improved stability.This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication.展开更多
Near-infrared(NIR)transparent inverted all-inorganic perovskite solar cells(PSCs)are excellent top cell candidates in tandem applications.An essential challenge is the replacement of metal contacts with transparent co...Near-infrared(NIR)transparent inverted all-inorganic perovskite solar cells(PSCs)are excellent top cell candidates in tandem applications.An essential challenge is the replacement of metal contacts with transparent conductive oxide(TCO)electrodes,which requires the introduction of a buffer layer to prevent sputtering damage.In this study,we show that the conventional buffers(i.e.,small organic molecules and atomic layer deposited metal oxides)used for organic-inorganic hybrid perovskites are not applicable to all-inorganic perovskites,due to non-uniform coverage of the vulnerable layers underneath,deterioration upon ion bombardment and moisture induced perovskite phase transition,A thin film of metal oxide nanoparticles by the spin-coating method serves as a non-destructive buffer layer for inorganic PSCs.All-inorganic inverted near-infrared-transparent PSCs deliver a PCE of 17.46%and an average transmittance of 73.7%between 780 and 1200 nm.In combination with an 18.56%Cu(In,Ga)Se_(2) bottom cell,we further demonstrate the first all-inorganic perovskite/CIGS 4-T tandem solar cell with a PCE of 24.75%,which exhibits excellent illumination stability by maintaining 86.7%of its initial efficiency after 1400 h.The non-destructive buffer lays the foundation for efficient and stable NIR-transparent inverted inorganic perovskite solar cells and perovskite-based tandems.展开更多
基金supported by the Program for Science and Technology Innovation Team in Zhejiang(Grant No.2021R01004)the Natural Science Foundation of Ningbo City(No.2023J119)+1 种基金the Ningbo Youth Science and Technology Innovation Leading Talent Project(2023QL029)K.C.Wong Magna Fund in Ningbo University,China。
文摘Inorganic CsPbI_(3)perovskite with superior thermal stability and photoelectric properties has developed into a promising candidate for photovoltaic applications.Nevertheless,the power conversion efficiency(PCE)of CsPbI_(3)perovskite solar cells(PSCs)still lags far behind that of both organic-inorganic hybrid counterparts and the theoretical PCE limit,primarily restricted by severe fill factor(FF)and opencircuit voltage(VOC)deficits.Herein,an in-situ self-crosslinking strategy is proposed to construct high-performance inverted inorganic PSCs by incorporating acrylate monomers as additives into CsPbI_(3)perovskite precursors.During the thermal annealing process of perovskite films,acrylate monomers can form network structures by breaking the C=C groups through an in-situ polymerization reaction,mainly anchored at the grain boundaries(GBs)and on the surfaces of perovskite.Meanwhile,the C=O groups of acrylate polymers can favorably coordinate with uncoordinated Pb^(2+),thereby decreasing defect density and stabilizing the perovskite phase.Particularly,with multiple crosslinking and passivation sites,the incorporation of dipentaerythritol pentaacrylate(DPHA)can effectively improve the perovskite film quality,suppress nonradiative recombination,and block moisture erosion.Consequently,the DPHAbased PSC achieves a champion PCE of 20.05%with a record-high FF of 85.05%,both of which rank among the top in the performance of inverted CsPbI_(3)PSCs.Moreover,the unencapsulated DPHA-based device exhibits negligible hysteresis,remarkably improved long-term storage,and operational stability.This work offers a facile and useful strategy to simultaneously promote the efficiency and device stability of inverted inorganic PSCs.
基金financial support of National Key Research and Development Program of China(Grant No.2022YFB04200302)joint funds of National Natural Science Foundation of China(Grant No.62104115)+5 种基金National Natural Science Foundation of China(Grant No.U21A2072)Overseas Expertise Introduction Project for Discipline Innovation of Higher Education of China(Grant No.B16027)Key R&D Program of Hebei Province(No.19214301D)Yunnan Provincial Science and Technology Project at Southwest United Graduate School(No.202302A0370009)Haihe Laboratory of Sustainable Chemical TransformationsFundamental Research Funds for the Central Universities,Nankai University。
文摘The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells(IPSCs),which reduces the defect formation energy.Here,a flexible molecule 5-maleimidovaleric acid(5-MVA)was introduced as a strain buffer to release the residual strain of CsPbI_(2.85)Br_(0.15)perovskite.Maleic anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb^(2+)through Lewis acid-base reaction,thus tightly“pull”the perovskite lattice.The in-between soft carbon chain increased the structural flexibility of CsPbI_(2.85)Br_(0.15)perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI_(2.85)Br_(0.15),resisted the corrosion of external strain,and also reduced the formation of defects such as VIand Pb0.In addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level barriers.Eventually,power conversion efficiency(PCE)of NiOxbased inverted IPSCs increased from 19.25%to 20.82%with the open-circuit voltage enhanced from 1.164 V to 1.230 V.The release of strain also improved the stability of CsPbI_(2.85)Br_(0.15)perovskite films and devices.
基金supported by the Young Cross Team Project of CAS(No.JCTD-2021-14)the National Natural Science Foundation of China(51925206)Gusu Innovation and Entrepreneur Leading Talents(ZXL2022466)。
文摘Self-assembled monolayers(SAMs),owing to their amphiphilic nature,tend to aggregate,which impedes the formation of a dense and uniform SAM on the substrate.Additionally,the weak adsorption ability of SAMs on the indium tin oxide(ITO)surface and the desorption of hydroxyl(OH)from the ITO surface induced by polar solvents can lead to the formation of vacancies.Herein,a dimethylacridine-based SAM is incorporated into the perovskite precursor solution.This SAM can be extruded from the precursor solution and enriched on the bottom surface of the perovskite,filling the vacancies and in situ forming a mixed SAM with MeO-2PACz as a hole-selective layer(HSL).The in situ formed mixed SAM optimizes the energy level alignment between the HSL and the perovskite,facilitating hole extraction and alleviating the residual strain of the perovskite film.Consequently,the perovskite solar cells(PSCs),based on the mixed SAM,achieve a power conversion efficiency(PCE)of 25.69%and exhibit excellent operational stability.When this approach is applied to 1.78 eV bandgap PSC devices,it yields a PCE of 20.08%.This work presents a unique strategy for fabricating both high-quality perovskite films and superior buried interfaces,which is also applicable to wide-bandgap PSCs.
基金supported by the National Natural Science Foundation of China under grant number 52179113Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety Grant No.SKLGME 022022,SKLGME-JBGS2401.
文摘Support and maintenance of tunnel excavations during operation are critical to ensure the safety and stability of tunnels.This study proposes a specialized support technology for a railroad tunnel in western China,characterized by substantial deformation and a limited inherent self-stabilizing capacity.The method involves the application of a foam concrete compressible layer at the inverted arch of the tunnel.The effectiveness of the foam concrete layer in mitigating the effect of the surrounding rock on the tunnel inverted arch structure is investigated by a combination of indoor tests and numerical simulations.The laboratory test results show that the train load has little effect on the compressive performance of the foamed concrete compressible layer,which indicates that the foamed concrete compressible layer can be applied in the tunnel invert.By analyzing the support effect of the established model,it is found that the foam concrete compressible layer can effectively absorb the deformation pressure generated by the surrounding rock and protect the secondary lining structure,when the compressible layer density is 500 kg/m^(3) and the thickness is set to 20 cm,the supporting effect is the best.
基金financial support provided by the Sichuan Science and Technology Program(No.2022NSFSC0226)Sichuan Science and Technology Program(No.2023ZYD0163)+6 种基金the Production-Education Integration Demonstration Project of Sichuan Provincethe Photovoltaic Industry Production-Education Integration Comprehensive Demonstration Base of Sichuan Province(Sichuan Financial Education[2022]No.106)China Tianfu Yongxing Laboratory Science and Technology Key Project(2023KJGG15)National Key Research and Development Program of China(2022YFB3803300)Beijing Natural Science Foundation(IS23037)the Department for Energy Security and Net Zero(project ID:NEXTCCUS)the ACT program(Accelerating CCS Technologies,Horizon2020 project NO.691712)。
文摘The 2D/3D heterojunction perovskites have garnered increasing attention due to their exceptional moisture and thermal stability.However,few works have paid attention to the influence of the subsequent change process of 2D/3D heterojunction PSC on the stability of PSCs.Moreover,the evolution of the interface and carrier dynamic behavior of the 2D/3D perovskite films with long-term operation has not been systematically developed befo re.In this work,the effects of 2D/3 D heterojunction evolution on the interface of perovskite films and different carrier dynamics during 2D/3D evolution are systematically analyzed for the first time.The decomposition of 2D/3D heterojunction in the perovskite film will have a certain impact on the surface and carrier dynamics behavior of perovskite.During the evolution of 2D/3D heterojunction,PbI_(2)crystals will appear,which will improve the interfacial energy level matching between the electron transport layer and perovskite film.With a long evolution time,some holes will appear on the surface of perovskite film.The open circuit voltage(V_(OC))of PSCs increased from 1.14 to1.18 V and the PCE increased to 23.21%after 300 h storage in the nitrogen atmosphere,and maintained 89%initial performance for with 3000 h stability test in N_(2)box.This discovery has a significant role in promoting the development of inverted heterojunction PSCs and constructing the revolution mechanism of charge carrier dynamic.
基金supported by the Science,Technology,and Innovation Commission of Shenzhen Municipality(No.GJHZ20220913143204008)the Shccig-Qinling Program(No.SMYJY202300294C)+3 种基金National Natural Science Foundation of China(Nos.22261142666,52372225,52172237,22305191)the Shaanxi Science Fund for Distinguished Young Scholars(No.2022JC-21)the Research Fund of the State Key Laboratory of Solidification Processing(NPU)China(No.2021-QZ-02).
文摘The stability of perovskite solar cells(PSCs)is adversely affected by nonradiative recombination resulting from buried interface defects.Herein,we synthesize a polyionic liquid,poly(p-vinylbenzyl trimethylam-monium hexafluorophosphate)(PTA),and introduce it into the buried interface of PSCs.The quaternary ammonium cation(N(-CH_(3))^(3+))in PTA can fill the vacancies of organic cations within the perovskite structure and reduce shallow energy level defects.Additionally,the hexafluorophosphate(PF6−)in PTA forms a Lewis acid-base interaction with Pb^(2+)in the perovskite layer,effectively passivating deep en-ergy level defects.Furthermore,hydrogen bonding can be established between organic cations and the PF6−anion,preventing the formation of shallow energy level defects.Through this synergistic mecha-nism,the deep and shallow energy level defects are effectively mitigated,resulting in improved device performance.As a result,the resulting treated inverted PSC exhibits an impressive power conversion ef-ficiency(PCE)of 24.72%.Notably,the PTA-treated PSCs exhibit remarkable stability,with 88.5%of the original PCE retained after undergoing heat aging at 85℃ for 1078 h,and 89.1%of the initial PCE main-tained following continuous exposure to light for 1100 h at the maximum power point.Synergistically suppressing multiple defects at the buried interface through the use of polyionic liquids is a promising way to improve the commercial viability of PSCs.
文摘In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the pendulum arms in the upright position and the car to reach the equilibrium position.Grey Wolf Optimization-based Linear Quadratic Regulator(GWO-LQR)and GWO-based Fuzzy LQR(FLQR)control algorithms are used in the control process.To improve the performance of the LQR and FLQR methods,the optimum values of the coefficients corresponding to the foot points of the membership functions are determined by the GWO algorithm.Both a graphic and a numerical analysis of the outcomes are provided.In the comparative analysis,it is observed that the GWO-based FLQR method reduces the settling time by 22.58% and the maximum peak value by 18.2% when evaluated in terms of the angular response of the pendulum arm.Furthermore,this approach outperformed comparable research in the literature with a settling time of 2.4 s.These findings demonstrate that the suggested GWO-based FLQR controlmethod outperforms existing literature in terms of the time required for the pendulum arm to reach equilibrium.
基金supported by the National Natural Science Foundation of China(No.52474435)China Baowu Low Carbon Metallurgy Innovation Foundation(BWLCF202307).
文摘Accurate forecasting of blast furnace gas(BFG)production is an essential prerequisite for reasonable energy scheduling and management to reduce carbon emissions.Coupling forecasting between BFG generation and consumption dynamics was taken as the research object.A multi-task learning(MTL)method for BFG forecasting was proposed,which integrated a coupling correlation coefficient(CCC)and an inverted transformer structure.The CCC method could enhance key information extraction by establishing relationships between multiple prediction targets and relevant factors,while MTL effectively captured the inherent correlations between BFG generation and consumption.Finally,a real-world case study was conducted to compare the proposed model with four benchmark models.Results indicated significant reductions in average mean absolute percentage error by 33.37%,achieving 1.92%,with a computational time of 76 s.The sensitivity analysis of hyperparameters such as learning rate,batch size,and units of the long short-term memory layer highlights the importance of hyperparameter tuning.
基金supported by the Natural Science Foundation of China(22425903,U24A20568,61705102,62288102,22409091,22409090 and 62205142)the National Key R&D Program of China(2023YFB4204500)the Jiangsu Provincial Departments of Science and Technology(BE2022023,BK20220010,BZ2023060,BK20240561,and BK20240562)。
文摘Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivation defects.However,the stability of the SAM molecules,the stability of the molecular anchoring conformation,and the impact on the stability of subsequent PSCs have not been clearly elucidated.In this review,we systematically discussed the intrinsic connection between the molecular conformation(including anchoring groups,spacer groups,and terminal groups)and the stability of SAMs.Sequentially,the research progress of SAMs as HSLs in improving the stability of PSCs is summarized,including photostability,thermal stability,ion migration,and residual stress.Finally,we look forward to the shortcomings and possible challenges of using SAMs as HSLs for inverted PSCs.
基金supported by the National Natural Science Foundation of China under Grant Nos.12275078,11875026,12035005,2020YFC2201400the innovative research group of Hunan Province under Grant No.2024JJ1006。
文摘We use out-of-time order correlators(OTOCs)to investigate the quantum instability and Ehrenfest time for an inverted harmonic oscillator(IHO).For initial states located in the stable manifolds of the IHO we find that the corresponding OTOC exhibits identical evolutionary characteristics to the saddle point before the Ehrenfest time.For initial states located in the unstable manifolds,the OTOCs still grow exponentially but the time to maintain exponential growth is related to the center position of its wave packet in phase space.Moreover,we use the Husimi Q function to visualize the quantum wave packets during exponential growth of the OTOCs.Our results show that quantum instability exists at arbitrary orbits in the IHO system,and the Ehrenfest time in the IHO system depends not only on the photon number of the initial system but also on the central positions of the initial states in phase space.
基金Supported by Research Incubation Fund of Xi’an People’s Hospital(Xi’an Fourth Hospital)(No.FZ-58).
文摘AIM:To evaluate the surgical outcomes of the perfluorocarbon liquid(PFCL)-assisted inverted multilayer internal limiting membrane(ILM)flaps covering technique in macular hole retinal detachment(MHRD)in high myopia with axial length(AL)≥30 mm.METHODS:In this retrospective,interventional,consecutive comparative study,44 MHRD eyes were divided into two groups:the PFCL-assisted inverted multilayer ILM flaps covering technique group(Group 1,21 eyes)and the ILM peeling group(Group 2,23 eyes).The follow-up period was>12mo.Postoperative outcomes,including retinal reattachment,macular hole(MH)closure,and bestcorrected visual acuity(BCVA),were assessed.Statistical analysis using the Mann–Whitney U test and Fisher’s exact test was conducted to compare differences between groups.RESULTS:There were no statistically significant differences in baseline preoperative clinical characteristics,including age,sex,AL,diopters,duration of symptom,lens status,posterior staphyloma presence and extent of RD.Retinal reattachment rates were higher in Group 1(90.5%)than in Group 2(82.6%),without statistical significance(P=0.667).MH closure rates were significantly higher in Group 1(85.7%)than in Group 2(17.4%;P<0.001).The Group-1 BCVA(logMAR)improved significantly from 2.13±0.91 preoperatively to 1.21±0.66 postoperatively(P=0.026).The Group 2 BCVA improved significantly from 1.91±0.53 preoperatively to 1.19±0.41 postoperatively(P=0.032).However,there were no significant differences in visual-acuity improvement between groups(P=0.460).CONCLUSION:This technique offers a more effective approach for improving MH closure rates and postoperative visual function in MHRD with AL≥30 mm in high myopia.
基金supported by the National Key R&D Program of China(2022YFE0118400)the National Natural Science Foundation of China(6217520)+1 种基金the Science and Technology Project of Fujian Province of China(2021H6018)the Natural Science Foundation of Fujian Province of China(2021J06009)。
文摘Flexible perovskite solar cells(fPSCs)have demonstrated commercial viability because of their promising lightness,flexibility,and low-cost advantages.However,in most applications,the fPSCs suffer from constant external stress,such as being kept at a convex bending state,imposing external stress on the brittle perovskite films and causing the fPSCs long-term stability problems.Overcoming these issues is vital.Herein,we propose an effective way to enhance the stability of the fPSCs under convex bending by modulating the residual stress of perovskite film for the first time.Specifically,we have carefully designed a synergistic strain engineering to toughen the perovskite films by introducing 1-butyl-3-methylimidazolium tetrafluoroborate,citric acid,and a novel cross-linker,5-(1,2-dithiolan-3-yl)pentanoate into perovskite films simultaneously.Besides passivating the perovskite films,the multiple additives effectively convert the residual stress within the perovskite films from tensile to compressive type to alleviate the detrimental impact of bending on the flexible perovskite films.As a result,the optimal efficiencies of triple-additive modified fPSCs have achieved 22.19%(0.06 cm^(2))and 19.44%(1.02 cm^(2)).More importantly,the strategy could significantly improve the stability of the perovskite films and fPSCs at a convex bending state.Our approach is inductive for the future practical field applications of high-performance fPSCs.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB31000000)Science and Technology Basic Resources Investigation Program of China(2021FY100200)+1 种基金Yunnan Revitalization Talent Support Program“Young Talent”and"Innovation Team"Projectsthe 14th Five-Year Plan of Xishuangbanna Tropical Botanical Garden,Chinese Academy of Science(XTBG-1450101)。
文摘The insect mitogenome is typically a compact circular molecule with highly conserved gene contents.Nonetheless,mitogenome structural variations have been reported in specific taxa,and gene rearrangements,usually the tRNAs,occur in different lineages.Because synapomorphies of mitogenome organizations can provide information for phylogenetic inferences,comparative analyses of mitogenomes have been given increasing attention.However,most studies use a very few species to represent the whole genus,tribe,family,or even order,overlooking potential variations at lower taxonomic levels,which might lead to some incorrect inferences.To provide new insights into mitogenome organizations and their implications for phylogenetic inference,this study conducted comparative analyses for mitogenomes of three social bee tribes(Meliponini,Bombini,and Apini)based on the phylogenetic framework with denser taxonomic sampling at the species and population levels.Comparative analyses revealed that mitogenomes of Apini and Bombini are the typical type,while those of Meliponini show diverse variations in mitogenome sizes and organizations.Large inverted repeats(IRs)cause significant gene rearrangements of protein coding genes(PCGs)and rRNAs in Indo-Malay/Australian stingless bee species.Molecular evolution analyses showed that the lineage with IRs have lower dN/dS ratios for PCGs than lineages without IRs,indicating potential effects of IRs on the evolution of mitochondrial genes.The finding of IRs and different patterns of gene rearrangements suggested that Meliponini is a hotspot in mitogenome evolution.Unlike conserved PCGs and rRNAs whose rearrangements were found only in the mentioned lineages within Meliponini,tRNA rearrangements are common across all three tribes of social bees,and are significant even at the species level,indicating that comprehensive sampling is needed to fully understand the patterns of tRNA rearrangements,and their implications for phylogenetic inference.
基金supported by the Excellent Youth Foundation from the Department of Education,Hunan Province(Grant No.21B0533).
文摘This paper proposes an explicit scheme to analyze the failure of a subsea polyhedral tunnel-liner system with an inverted arch under mechanical loading and fire fields.The thin-walled liner is made of Functionally Graded Materials(FGMs),which may improve the stability behavior of the tunnel-liner system.Hydrostatic pressure is inevitable in the liner since underground water may penetrate the cracks of the tunnel,and reach the outer surface of the liner.In addition,an elevated temperature loading is taken into account,considering that fire may occur in the tunnel-liner system.Under the combination of mechanical loading and thermal loading,the liner deforms into a single-lobe shape,which is depicted by a trigonometric function.The total potential energy is expressed quantitatively after the energy approach and thin-walled shell theory are used.The minimum potential energy is obtained when the critical buckling occurs.The critical buckling pressure is calculated,which considers the effect of the thermal field.The present analytical prediction is subsequently compared precisely with other closed-form solutions.Finally,the effects of several parameters,such as the geometric shapes,temperature variations,and volume fraction indices,are discussed to further survey the buckling performance of the nonlinear buckling of an FGM polyhedral liner with an inverted arch.One may address a polyhedral liner with fewer polyhedral sides,and a lower volume fraction index is recommended to rehabilitate cracked tunnels in engineering applications.
基金UK Engineering and Physical Sciences Research Council(EPSRC)New Investigator Award(2018,EP/R043272/1)Newton Advanced Fellowship(192097)for financial support+3 种基金the Royal Society,the Engineering and Physical Sciences Research Council(EPSRC,EP/R023980/1,EP/V027131/1)the European Research Council(ERC)under the European Union's Horizon 2020 research and innovation program(HYPERION,Grant Agreement Number 756962)the Royal Society and Tata Group(UF150033)EPSRC SPECIFIC IKC(EP/N020863/1)
文摘Metal oxide charge transport materials are preferable for realizing long-term stable and potentially low-cost perovskite solar cells(PSCs).However,due to some technical difficulties(e.g.,intricate fabrication protocols,high-temperature heating process,incompatible solvents,etc.),it is still challenging to achieve efficient and reliable all-metal-oxide-based devices.Here,we developed efficient inverted PSCs(IPSCs)based on solution-processed nickel oxide(NiO_(x))and tin oxide(SnO_(2))nanoparticles,working as hole and electron transport materials respectively,enabling a fast and balanced charge transfer for photogenerated charge carriers.Through further understanding and optimizing the perovskite/metal oxide interfaces,we have realized an outstanding power conversion efficiency(PCE)of 23.5%(the bandgap of the perovskite is 1.62 eV),which is the highest efficiency among IPSCs based on all-metal-oxide charge transport materials.Thanks to these stable metal oxides and improved interface properties,ambient stability(retaining 95%of initial PCE after 1 month),thermal stability(retaining 80%of initial PCE after 2 weeks)and light stability(retaining 90%of initial PCE after 1000 hours aging)of resultant devices are enhanced significantly.In addition,owing to the low-temperature fabrication procedures of the entire device,we have obtained a PCE of over 21%for flexible IPSCs with enhanced operational stability.
基金supported by Shaanxi Province Innovation Capacity Support Program (2022TD-06)Transportation Industry Key Science and Technology Projects (2021-MS1-011)+1 种基金the Science and Technology Project of the Shaanxi Provincial Department of Transportation (20-02K)the Scientific Project from Henan Provincial Communication (2021-2-8)。
文摘An inverted asphalt pavement is created by reversing the sequence of the lower and middle layers in a conventional asphalt pavement. The lower layer is composed of material with larger particle size and lower asphalt content, which improves its ability to withstand deformation caused by rutting. On the other hand, the middle surface has a higher asphalt content, specifically designed to resist fatigue cracking. This paper examines the mechanical response of two pavement structures and investigates the potential of two measures, inverted asphalt pavement and asphalt mixture design by vertical vibration compaction method(VVCM), in reducing stresses and stress levels in asphalt pavements. Additionally, a large thickness rutting and fatigue test method was developed to study the rutting resistance and fatigue life of the pavement structures, and to construct rutting deformation and fatigue life prediction models. Finally, test sections were paved to verify the feasibility of the inverted pavement and VVCM materials. The findings show that inverted pavement and VVCM materials have a minimal impact on pavement stress, but can reduce pavement shear and tensile stress levels by up to 18%–25%.Furthermore, inverted pavement and VVCM materials have positive effects on improving the rutting resistance and fatigue life of asphalt pavements.
基金supported by the National Natural Science Foundation of China(Grant Nos.22375163,52203338,52172101,52103286)the Shaanxi Science and Technology Innovation Team(Grant No.2023-CX-TD-44)+1 种基金Shaanxi Key R&D Program(Grant No.2022KWZ-07)Shccig-Qinling Program.
文摘Wide-bandgap perovskite solar cells(WBG PSCs)have garnered significant research attention for their potential in tandem solar cells.However,they face challenges such as high open-circuit voltage losses and severe phase instability.These issues are primarily owing to the formation of defects,ion migration,and energy level mismatches at the interface of WBG perovskite devices.Meanwhile,inverted PSCs demonstrate superior stability potential and compatibility with tandem devices,making them the most promising application for WBG perovskite materials.Consequently,interface modulation for such devices has become imperative.In this review,from the perspective of applicability in tandem devices,we first provided a concise overview of WBG perovskite research and its efficiency progress in inverted devices.We further discussed interface carrier dynamics and the potential impact of interfaces on such device performance.Afterward,we presented a comprehensive summary of interface engineering in inverted WBG perovskite(1.60 eV-1.80 eV)solar cells.The research particularly explored both the upper and buried interfaces of WBG absorbers in the inverted PSCs,thoroughly investigating interface design strategies and outlining promising research directions.Finally,this review provides insight into the future development of interface engineering for high-performance and large-area WBG PSCs.
基金funded by the Deanship of Scientific Research and Libraries,Princess Nourah bint Abdulrahman University,through the Program of Research Project Funding after Publication,Grant No.(RPFAP-34-1445).
文摘A novel inverted generalized gamma(IGG)distribution,proposed for data modelling with an upside-down bathtub hazard rate,is considered.In many real-world practical situations,when a researcher wants to conduct a comparative study of the life testing of items based on cost and duration of testing,censoring strategies are frequently used.From this point of view,in the presence of censored data compiled from the most well-known progressively Type-Ⅱ censoring technique,this study examines different parameters of the IGG distribution.From a classical point of view,the likelihood and product of spacing estimation methods are considered.Observed Fisher information and the deltamethod are used to obtain the approximate confidence intervals for any unknown parametric function of the suggestedmodel.In the Bayesian paradigm,the same traditional inferential approaches are used to estimate all unknown subjects.Markov-Chain with Monte-Carlo steps are considered to approximate all Bayes’findings.Extensive numerical comparisons are presented to examine the performance of the proposed methodologies using various criteria of accuracy.Further,using several optimality criteria,the optimumprogressive censoring design is suggested.To highlight how the proposed estimators can be used in practice and to verify the flexibility of the proposed model,we analyze the failure times of twenty mechanical components of a diesel engine.
基金the financial support from Shanxi Province Science and Technology Department(20201101012,202101060301016)the support from the APRC Grant of the City University of Hong Kong(9380086)+5 种基金the TCFS Grant(GHP/018/20SZ)MRP Grant(MRP/040/21X)from the Innovation and Technology Commission of Hong Kongthe Green Tech Fund(202020164)from the Environment and Ecology Bureau of Hong Kongthe GRF grants(11307621,11316422)from the Research Grants Council of Hong KongGuangdong Major Project of Basic and Applied Basic Research(2019B030302007)Guangdong-Hong Kong-Macao Joint Laboratory of Optoelectronic and Magnetic Functional Materials(2019B121205002).
文摘A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells.The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs.In this work,we adopted a solid-liquid two-step film formation technique,which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films.This method possesses the advantages of integrating vapor deposition and solution methods,which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform,large-area perovskite film.Furthermore,modification of the NiO_(x)/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization.As a result,a large-area perovskite film possessing larger grains,fewer pinholes,and reduced defects could be achieved.The inverted PSM with an active area of 61.56 cm^(2)(10×10 cm^(2)substrate)achieved a champion power conversion efficiency of 20.56%and significantly improved stability.This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication.
基金financially supported by the National Natural Science Foundation of China (22279083,22109166,52202183)Guangdong Basic and Applied Basic Research Foundation (Grant No.2019A1515011136,2022B1515120006,2023B1515120041,2414050001473)+3 种基金Guangdong Province Higher Vocational Colleges and Schools Pearl River Scholar Funded SchemeGuangdong Provincial Key Laboratory Program (2021B1212040001)from the Department of Science and Technology of Guangdong ProvinceBeijing Institute of TechnologySongshan Lake Materials Laboratory。
文摘Near-infrared(NIR)transparent inverted all-inorganic perovskite solar cells(PSCs)are excellent top cell candidates in tandem applications.An essential challenge is the replacement of metal contacts with transparent conductive oxide(TCO)electrodes,which requires the introduction of a buffer layer to prevent sputtering damage.In this study,we show that the conventional buffers(i.e.,small organic molecules and atomic layer deposited metal oxides)used for organic-inorganic hybrid perovskites are not applicable to all-inorganic perovskites,due to non-uniform coverage of the vulnerable layers underneath,deterioration upon ion bombardment and moisture induced perovskite phase transition,A thin film of metal oxide nanoparticles by the spin-coating method serves as a non-destructive buffer layer for inorganic PSCs.All-inorganic inverted near-infrared-transparent PSCs deliver a PCE of 17.46%and an average transmittance of 73.7%between 780 and 1200 nm.In combination with an 18.56%Cu(In,Ga)Se_(2) bottom cell,we further demonstrate the first all-inorganic perovskite/CIGS 4-T tandem solar cell with a PCE of 24.75%,which exhibits excellent illumination stability by maintaining 86.7%of its initial efficiency after 1400 h.The non-destructive buffer lays the foundation for efficient and stable NIR-transparent inverted inorganic perovskite solar cells and perovskite-based tandems.
