We report on chip-scale optical gates based on the integration of evanescent waveguide unitraveling-carrier photo- diodes （EC-UTC-PDs） and intra-step quantum well electroabsorption modulators （IQW-EAMs） on n-InP s...We report on chip-scale optical gates based on the integration of evanescent waveguide unitraveling-carrier photo- diodes （EC-UTC-PDs） and intra-step quantum well electroabsorption modulators （IQW-EAMs） on n-InP substrates. These devices exhibit simultaneously 2.1 GHz and -16.2 dB RF-gain at 21 GHz with a 450 t2 thin-film resistor and a bypass capacitor integrated on a chip.展开更多
间歇采样噪声调制转发式的灵巧噪声干扰向来是雷达干扰对抗的难点。在深入研究间歇采样转发干扰(interrupted-sampling repeater jamming,ISRJ)的基础上,针对ISRJ时域不连续采样的特点,提出一种基于脉内步进线性调频(linear frequency m...间歇采样噪声调制转发式的灵巧噪声干扰向来是雷达干扰对抗的难点。在深入研究间歇采样转发干扰(interrupted-sampling repeater jamming,ISRJ)的基础上,针对ISRJ时域不连续采样的特点,提出一种基于脉内步进线性调频(linear frequency modulation,LFM)波形的抗ISRJ方法。该方法利用脉内步进LFM子脉冲之间的正交性互相掩护,子脉冲间频率步进使得干扰采样段经调制后仍无法干扰相邻子脉冲,从而可以有效提取干扰机没有采样的信号段,在对抗高占空比的重复转发干扰时优势明显。仿真条件下,干扰采样与发射波形分段非同步时,窄子脉冲较宽子脉冲输出信干噪比提高约3.1dB。展开更多
Background: Fracture of distal radius with involvement of the ulnar styloid process is a common clinical problem. It can be treated conservatively, usually involving wrist immobilization in plaster cast or surgically....Background: Fracture of distal radius with involvement of the ulnar styloid process is a common clinical problem. It can be treated conservatively, usually involving wrist immobilization in plaster cast or surgically. A key method of surgical fixation is external fixation by distractor. Distractor can be applied either only on the radial side or on both ulnar and radial sides. Materials and Methods: A prospective randomized and comparative study of 1 year duration was conducted on 32 patients admitted in the Department of Orthopaedics of BSMC & H in the age group of 20 to 75 years old with AO types B and C distal radius fracture along with involvement of the ulnar styloid process. The parameters studied were restoration of radial length, restoration of radial angle, intracarpal step-off and palmar tilt which were statistically evaluated and Fisher’s exact test was performed. The two tailed P-value was calculated and both the groups were statistically compared. Results: In our study, 37.5% patients in Group A and 81.25% in Group B had a radial difference Table 1, Chart 1). 43.75% patients in Group A and 87.5% in Group B had radial angle Table 2, Chart 2). 31.25% in Group A and 75% had intra carpal step off Table 3, Chart 3). 62.5% had an abnormal palmar tilt in Group A while only 6.25% had an abnormal palmar tilt in Group B which is extremely statistically significant. On an average, 2 mm of distraction was required in 75% patients of Group A while only 30% patients in Group B required distraction (Table 4, Chart 4). Conclusion: In our study, the radial difference, radial angle, intra carpal step off and palmar tilt returned significantly to normal in the patients treated with distractor on radial side only when compared with distractor application on both radial and ulnar sides for distal radius fracture with ulnar styloid process involvement. Also post-operative distraction required under image intensifier was higher in the group treated with distractor on either side than those with distractor only on radial side.展开更多
A 100-μm-long electroabsorption modulator monolithically integrated with passive waveguides at the input and output ports is fabricated through ion implantation induced quantum well intermixing, using only a twostep ...A 100-μm-long electroabsorption modulator monolithically integrated with passive waveguides at the input and output ports is fabricated through ion implantation induced quantum well intermixing, using only a twostep low-pressure metal-organic vapor phase epitaxial process. An InGaAsP/InGaAsP intra-step quantum well is introduced to the active region to improve the modulation properties. In the experiment high modulation speed and high extinction ratio are obtained simultaneously, the electrical-to-optical frequency response （E/O response） without any load termination reaches to 22 GHz, and extinction ration is as high as 16 dB.展开更多
This paper reports a detailed theoretical investigation of strain effects on the performance of electroabsorption optical modulators based on the asym- metric intra-step-barrier coupled double strained quantum wells ...This paper reports a detailed theoretical investigation of strain effects on the performance of electroabsorption optical modulators based on the asym- metric intra-step-barrier coupled double strained quantum wells （AICD-SQWs） active layer. For this purpose, the electroabsorption coefficient was calculated over a range of AICD-SQWs strain from compressive to tensile strain. Then, the extinction ratio （ER） and insertion loss parameters were evaluated from calculated electroabsorp- tion coefficient for transverse electric （TE） input light polarization. The results of the simulation suggest that the tensile strain from 0.05% to 0.2% strain in the wide quantum well has a significant impact on the ER and insertion loss as compared with compressive strain, whereas the compressive strain of the narrow quantum well from -0.5% to -0.7% strain has a more pronounced impact on the improvement of the ER and insertion loss as compared with tensile strain.展开更多
基金supported by the National High Technology Research and Development of China (Grant Nos. 2006AA01Z256,2007AA03Z419 and 2007AA03Z417)the State Key Development Program for Basic Research of China (Grant Nos. 2006CB604901and 2006CB604902)the National Natural Science Foundation of China (Grant Nos. 90401025,60736036,60706009 and 60777021)
文摘We report on chip-scale optical gates based on the integration of evanescent waveguide unitraveling-carrier photo- diodes （EC-UTC-PDs） and intra-step quantum well electroabsorption modulators （IQW-EAMs） on n-InP substrates. These devices exhibit simultaneously 2.1 GHz and -16.2 dB RF-gain at 21 GHz with a 450 t2 thin-film resistor and a bypass capacitor integrated on a chip.
文摘间歇采样噪声调制转发式的灵巧噪声干扰向来是雷达干扰对抗的难点。在深入研究间歇采样转发干扰(interrupted-sampling repeater jamming,ISRJ)的基础上,针对ISRJ时域不连续采样的特点,提出一种基于脉内步进线性调频(linear frequency modulation,LFM)波形的抗ISRJ方法。该方法利用脉内步进LFM子脉冲之间的正交性互相掩护,子脉冲间频率步进使得干扰采样段经调制后仍无法干扰相邻子脉冲,从而可以有效提取干扰机没有采样的信号段,在对抗高占空比的重复转发干扰时优势明显。仿真条件下,干扰采样与发射波形分段非同步时,窄子脉冲较宽子脉冲输出信干噪比提高约3.1dB。
文摘Background: Fracture of distal radius with involvement of the ulnar styloid process is a common clinical problem. It can be treated conservatively, usually involving wrist immobilization in plaster cast or surgically. A key method of surgical fixation is external fixation by distractor. Distractor can be applied either only on the radial side or on both ulnar and radial sides. Materials and Methods: A prospective randomized and comparative study of 1 year duration was conducted on 32 patients admitted in the Department of Orthopaedics of BSMC & H in the age group of 20 to 75 years old with AO types B and C distal radius fracture along with involvement of the ulnar styloid process. The parameters studied were restoration of radial length, restoration of radial angle, intracarpal step-off and palmar tilt which were statistically evaluated and Fisher’s exact test was performed. The two tailed P-value was calculated and both the groups were statistically compared. Results: In our study, 37.5% patients in Group A and 81.25% in Group B had a radial difference Table 1, Chart 1). 43.75% patients in Group A and 87.5% in Group B had radial angle Table 2, Chart 2). 31.25% in Group A and 75% had intra carpal step off Table 3, Chart 3). 62.5% had an abnormal palmar tilt in Group A while only 6.25% had an abnormal palmar tilt in Group B which is extremely statistically significant. On an average, 2 mm of distraction was required in 75% patients of Group A while only 30% patients in Group B required distraction (Table 4, Chart 4). Conclusion: In our study, the radial difference, radial angle, intra carpal step off and palmar tilt returned significantly to normal in the patients treated with distractor on radial side only when compared with distractor application on both radial and ulnar sides for distal radius fracture with ulnar styloid process involvement. Also post-operative distraction required under image intensifier was higher in the group treated with distractor on either side than those with distractor only on radial side.
基金Project supported by the National High Technology Research and Development Program of China (No.2006AA01Z256)the State Key Development Program for Basic Research of China (Nos.2006CB604901,2006CB604902)the National Natural Science Foundationof China (No.90401025)
文摘A 100-μm-long electroabsorption modulator monolithically integrated with passive waveguides at the input and output ports is fabricated through ion implantation induced quantum well intermixing, using only a twostep low-pressure metal-organic vapor phase epitaxial process. An InGaAsP/InGaAsP intra-step quantum well is introduced to the active region to improve the modulation properties. In the experiment high modulation speed and high extinction ratio are obtained simultaneously, the electrical-to-optical frequency response （E/O response） without any load termination reaches to 22 GHz, and extinction ration is as high as 16 dB.
文摘This paper reports a detailed theoretical investigation of strain effects on the performance of electroabsorption optical modulators based on the asym- metric intra-step-barrier coupled double strained quantum wells （AICD-SQWs） active layer. For this purpose, the electroabsorption coefficient was calculated over a range of AICD-SQWs strain from compressive to tensile strain. Then, the extinction ratio （ER） and insertion loss parameters were evaluated from calculated electroabsorp- tion coefficient for transverse electric （TE） input light polarization. The results of the simulation suggest that the tensile strain from 0.05% to 0.2% strain in the wide quantum well has a significant impact on the ER and insertion loss as compared with compressive strain, whereas the compressive strain of the narrow quantum well from -0.5% to -0.7% strain has a more pronounced impact on the improvement of the ER and insertion loss as compared with tensile strain.
