The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
With the increasing penetration of renewable energy,the coordination of energy storage with thermal power for frequency regulation has become an effective means to enhance grid frequency security.Addressing the challe...With the increasing penetration of renewable energy,the coordination of energy storage with thermal power for frequency regulation has become an effective means to enhance grid frequency security.Addressing the challenge of improving the frequency regulation performance of a thermal-storage primary frequency regulation system while reducing its associated losses,this paper proposes a multi-dimensional cooperative optimization strategy for the control parameters of a combined thermal-storage system,considering regulation losses.First,the frequency regulation losses of various components within the thermal power unit are quantified,and a calculation method for energy storage regulation loss is proposed,based on Depth of Discharge(DOD)and C-rate.Second,a thermal-storage cooperative control method based on series compensation is developed to improve the system’s frequency regulation performance.Third,targeting system regulation loss cost and regulation output,and considering constraints on output overshoot and system parameters,an improved Particle Swarm Optimization(PSO)algorithm is employed to tune the parameters of the low-pass filter and the series compensator,thereby reducing regulation losses while enhancing performance.Finally,simulation results demonstrate that the total loss cost of the proposed control strategy is comparable to that of a system with only thermal power participation.However,the thermal power loss cost is reduced by 42.16%compared to the thermal-only case,while simultaneously improving system frequency stability.Thus,the proposed strategy effectively balances system frequency stability and economic efficiency.展开更多
As power systems expand,solving the unit commitment problem(UCP)becomes increasingly challenging due to the curse of dimensionality,and traditional methods often struggle to balance computational efficiency and soluti...As power systems expand,solving the unit commitment problem(UCP)becomes increasingly challenging due to the curse of dimensionality,and traditional methods often struggle to balance computational efficiency and solution optimality.To tackle this issue,we propose a problem-structure-informed quantum approximate optimization algorithm(QAOA)framework that fully exploits the quantum advantage under extremely limited quantum resources.Specifically,we leverage the inherent topological structure of power systems to decompose large-scale UCP instances into smaller subproblems,which are solvable in parallel by limited number of qubits.This decomposition not only circumvents the current hardware limitations of quantum computing but also achieves higher performance as the graph structure of the power system becomes more sparse.Consequently,our approach can be extended to future power systems that are larger and more complex.展开更多
Based on tests and theoretical calculation an optimum steam admission mode is proposed which can effectively solve the steam-excited vibration.An operation mode jointly considering the valve point and operation load i...Based on tests and theoretical calculation an optimum steam admission mode is proposed which can effectively solve the steam-excited vibration.An operation mode jointly considering the valve point and operation load is proposed based on the analysis and study of a large number of unit operation optimization methods.According to the steam-excited vibration that occurs during the optimization process when the nozzle governing steam turbine switches from a single valve to multi-valves a steam admission optimization program is proposed.This comprehensive program considering the steam-excited vibration is applied to a 600 MW steam turbine unit to obtain the optimum sliding pressure curve and the optimum operation mode and the steam-excited vibration is solved successfully.展开更多
With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing...With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.展开更多
A model-assistant extended state observer(MESO)-based decoupling control strategy is proposed for boiler-turbine units in the presence of unknown external disturbance and model-plant mismatch. For ease of implementati...A model-assistant extended state observer(MESO)-based decoupling control strategy is proposed for boiler-turbine units in the presence of unknown external disturbance and model-plant mismatch. For ease of implementation, the decoupling compensator is reduced to the proportion integration(PI) decoupler with the frequency domain analysis, where the decoupling error in collusion of uncertainties and disturbances can be estimated by the proposed MESO and then compensated. To decrease the sensitivity of the dynamic error for the decoupling control and fulfill various requirements of constraints, such as safety operation, energy conservation, emission reduction, etc., the plant is transmitted through a scheduled steady state region which is achieved from the optimized reference governor in advance. Simulation results show that the proposed control strategy can well suppress various disturbances including a decoupling error, and multi-objective optimization can meet multiple requirements with the premise of safety production.展开更多
Electric power system is one of the most important and complex engineering in modern society, supplying main and general power for social production and social life. Meanwhile, since it is a productive system with bo...Electric power system is one of the most important and complex engineering in modern society, supplying main and general power for social production and social life. Meanwhile, since it is a productive system with both high input and output, it has an obvious economic significance to improve its operating efficiency. For an example, an unit is 10 GW scale, if its standard coal consumption can be decreased with 1 g/kW·h, it can save about 5 000 tons standard coal per year. It will be discussed mainly that how to establish optimization model and its numerical algorithm for operating management of the electric power system. The idea on establishing optimization model is how to dispatch work state of units or power plants, so that total cost of fuel consumption for generation is reduced to the minimum. Here the dispatch is to decide which unit or plant to operate, which unit or plant to stop running, how much power should be generated for those operating units or plants at each given time interval.展开更多
This article has summarized the optimized measures relating to the loading of catalyst,and the sixth operating cycle of the residue hydrotreating unit at SINOPEC's Maoming Branch Company,and made a detailed compar...This article has summarized the optimized measures relating to the loading of catalyst,and the sixth operating cycle of the residue hydrotreating unit at SINOPEC's Maoming Branch Company,and made a detailed comparison on the impurities removal rate,hydrogen consumption and energy consumption of the sixth operating cycle with those achieved by the previous five cycles.Test results have revealed that the second-generation RHT series novel residue hydrotreating catalysts featured high activity,good stability,and long operating cycle and could remarkably reduce the hydrogen consumption and energy consumption of process unit.The hydrotreated AR product,having low Conradson carbon residue,low sulfur content,low metal content,high content of saturated hydrocarbons,and low content of asphaltenes and resins,is an excellent FCC feed.Judging from their overall property the second-generation RHT series of residue hydrotreating catalysts used in the sixth operating cycle have commanded a leading position among other catalysts used in previous operating cycles.展开更多
Coordinated controller tuning of the boiler turbine unit is a challenging task due to the nonlinear and coupling characteristics of the system.In this paper,a new variant of binary particle swarm optimization （PSO） ...Coordinated controller tuning of the boiler turbine unit is a challenging task due to the nonlinear and coupling characteristics of the system.In this paper,a new variant of binary particle swarm optimization （PSO） algorithm,called probability based binary PSO （PBPSO）,is presented to tune the parameters of a coordinated controller.The simulation results show that PBPSO can effectively optimize the control parameters and achieves better control performance than those based on standard discrete binary PSO,modified binary PSO,and standard continuous PSO.展开更多
To increase purified gas production and reduce the comprehensive energy consumption of high-sulfur natural gas sweetening unit,a process simulation model was established by using ProMax based on the field operation da...To increase purified gas production and reduce the comprehensive energy consumption of high-sulfur natural gas sweetening unit,a process simulation model was established by using ProMax based on the field operation data in the Sinopec Puguang Natural Gas Purification Plant.Then,sensitivity analysis and optimization study were carried out on the main operating parameters,including circulation rates,the concen-trations and the inlet temperatures of primary and secondary absorption towers of MDEA(methyldiethanolamine)solutions.Furthermore,the effects of reduction of the feed gas load and pressure and increasement of H_(2)S content on the quality and yield rates of purified gas were analyzed under the optimized operating conditions with the actual field situations.And the following research results were obtained.First,the absorption selectivity of MDEA solutions can be improved by decreasing the circulation rates,concentrations and inlet temperatures of MDEA solutions,which is favorable for the increase of the yield rates of purified gas.Specifically,the circulation rate of MDEA solution is the main factor influencing the comprehensive energy consumption of a high-sulfur natural gas sweetening unit.Second,when the flow rate,pressure and H 2S content of feed gas fluctuate,the purification requirements can be satisfied under the optimized operating conditions.Third,energy con-servation under low flow rates of feed gas can be achieved by reducing the flow rates of regenerated steam and adjusting the position of MDEA solutions entering the secondary absorption tower.Fourth,as H_(2)S content is increased by 1%,it is necessary to increase the circulation rate of MDEA solution by about 20×10^(3)kg/h.Fifth,after parameter optimization,the yield rate of purified gas is increased by 0.5%and the comprehensive energy consumption is reduced by 19.1%under the operating condition of full load.展开更多
The advanced fin-shaped field-effect transistor(FinFET)technology offers higher integration density and stronger channel control capabilities,however,more complex process effects are also introduced which have signifi...The advanced fin-shaped field-effect transistor(FinFET)technology offers higher integration density and stronger channel control capabilities,however,more complex process effects are also introduced which have significant influence on device performance.To address these issues,we complete a design-technology co-optimization(DTCO)focused on FinFET,including both process-induced effect during gate formation and corresponding digital unit optimization design.The 14 nm Fin-FET complementary metal oxide semiconductor(CMOS)technology is used to illustrate the sensitivity of transistor perfor-mance to process-induced effect,specifically the poly pitch effect(PPE)and cut poly effect(CPE).Predictive technology com-puter aided design(TCAD)simulations have been carried out to evaluate the transistor performance in advance.Based on the results,optimizations in digital unit design is proposed.Fall delay of the digital unit inverter is decreased by 0.7%,and the rise delay is decreased by 2.1%.For multiple selector(MUX2NV),the delay decreases by 4.64%for rise and 3.56%for drop,respec-tively.展开更多
Rooftop units(RTUs)were commonly employed in small commercial buildings that represent that can frequently do not take the higher level maintenance that chillers receive.Fault detection and diagnosis(FDD)tools can be ...Rooftop units(RTUs)were commonly employed in small commercial buildings that represent that can frequently do not take the higher level maintenance that chillers receive.Fault detection and diagnosis(FDD)tools can be employed for RTU methods to ensure essential faults are addressed promptly.In this aspect,this article presents an Optimal Deep Belief Network based Fault Detection and Classification on Packaged Rooftop Units(ODBNFDC-PRTU)model.The ODBNFDC-PRTU technique considers fault diagnosis as amulti-class classification problem and is handled usingDL models.For fault diagnosis in RTUs,the ODBNFDC-PRTU model exploits the deep belief network(DBN)classification model,which identifies seven distinct types of faults.At the same time,the chicken swarm optimization(CSO)algorithm-based hyperparameter tuning technique is utilized for resolving the trial and error hyperparameter selection process,showing the novelty of the work.To illustrate the enhanced performance of the ODBNFDC-PRTU algorithm,a comprehensive set of simulations are applied.The comparison study described the improvement of the ODBNFDC-PRTU method over other recent FDD algorithms with maximum accuracy of 99.30%and TPR of 93.09%.展开更多
Advanced technologies like Cyber-Physical Systems(CPS)and the Internet of Things(IoT)have supported modernizing and automating the transportation region through the introduction of Intelligent Transportation Systems(I...Advanced technologies like Cyber-Physical Systems(CPS)and the Internet of Things(IoT)have supported modernizing and automating the transportation region through the introduction of Intelligent Transportation Systems(ITS).Integrating CPS-ITS and IoT provides real-time Vehicle-to-Infrastructure(V2I)communication,supporting better traffic management,safety,and efficiency.These technological innovations generate complex problems that need to be addressed,uniquely about data routing and Task Scheduling(TS)in ITS.Attempts to solve those problems were primarily based on traditional and experimental methods,and the solutions were not so successful due to the dynamic nature of ITS.This is where the scope of Machine learning(ML)and Swarm Intelligence(SI)has significantly impacted dealing with these challenges;in this line,this research paper presents a novel method for TS and data routing in the CPS-ITS.This paper proposes using a cutting-edge ML algorithm for data transmission from CPS-ITS.This ML has Gated Linear Unit-approximated Reinforcement Learning(GLRL).Greedy Iterative-Particle Swarm Optimization(GI-PSO)has been recommended to develop the Particle Swarm Optimization(PSO)for TS.The primary objective of this study is to enhance the security and effectiveness of ITS systems that utilize CPS-ITS.This study trained and validated the models using a network simulation dataset of 50 nodes from numerous ITS environments.The experiments demonstrate that the proposed GLRL reduces End-toEnd Delay(EED)by 12%,enhances data size use from 83.6%to 88.6%,and achieves higher bandwidth allocation,particularly in high-demand scenarios such as multimedia data streams where adherence improved to 98.15%.Furthermore,the GLRL reduced Network Congestion(NC)by 5.5%,demonstrating its efficiency in managing complex traffic conditions across several environments.The model passed simulation tests in three different environments:urban(UE),suburban(SE),and rural(RE).It met the high bandwidth requirements,made task scheduling more efficient,and increased network throughput(NT).This proved that it was robust and flexible enough for scalable ITS applications.These innovations provide robust,scalable solutions for real-time traffic management,ultimately improving safety,reducing NC,and increasing overall NT.This study can affect ITS by developing it to be more responsive,safe,and effective and by creating a perfect method to set up UE,SE,and RE.展开更多
This paper covers the hicles. Different from the traditional trajectory optimization design problem ＂once downward＂ movement principle of a class of demonstration flight test ve of negative attack angle, the ＂twice...This paper covers the hicles. Different from the traditional trajectory optimization design problem ＂once downward＂ movement principle of a class of demonstration flight test ve of negative attack angle, the ＂twice down ward＂ lower trajectory is proposed based on a SOP algorithm to meet the requirement for validating thermal protec- tion materials, Furthermore, an important advantage of this presented method, compared to the traditional method, is that both trajectory constraints and attitude control constraints are considered. An engineering example is also given to show the advantage and effectiveness of this method,展开更多
At present, large centrifugal compressors are widely used in domestic petrochemical plants. This paper describes the control status of compressor control system in domestic petrochemical plants, the optimization schem...At present, large centrifugal compressors are widely used in domestic petrochemical plants. This paper describes the control status of compressor control system in domestic petrochemical plants, the optimization scheme to realize energy-saving control and the economic benefits brought to enterprises after control optimization.展开更多
Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operat...Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operating point and process constraints, which is related to the margins of design variables. Because of various ciisturbances in chemical processes, some distances must be reserved for fluctuations of process variables and the optimum operating point is not on some process constraints. Thus the benefit of steady-state optimization can not be fully achied（ed while that of dynamic optimization can be really achieved. In this study, the steady-state optimizationand dynamic optimization are used, and the potential benefit-is divided into achievable benefit for profit and unachievable benefit for control. The fluid catalytic cracking unit （FCCU） is used for case study. With the analysis on how the margins of design variables influence the economic benefit and control performance, the bottlenecks of process design are found and appropriate control structure can be selected.展开更多
An accurate prediction of earth pressure balance(EPB)shield moving performance is important to ensure the safety tunnel excavation.A hybrid model is developed based on the particle swarm optimization(PSO)and gated rec...An accurate prediction of earth pressure balance(EPB)shield moving performance is important to ensure the safety tunnel excavation.A hybrid model is developed based on the particle swarm optimization(PSO)and gated recurrent unit(GRU)neural network.PSO is utilized to assign the optimal hyperparameters of GRU neural network.There are mainly four steps:data collection and processing,hybrid model establishment,model performance evaluation and correlation analysis.The developed model provides an alternative to tackle with time-series data of tunnel project.Apart from that,a novel framework about model application is performed to provide guidelines in practice.A tunnel project is utilized to evaluate the performance of proposed hybrid model.Results indicate that geological and construction variables are significant to the model performance.Correlation analysis shows that construction variables(main thrust and foam liquid volume)display the highest correlation with the cutterhead torque(CHT).This work provides a feasible and applicable alternative way to estimate the performance of shield tunneling.展开更多
To mitigate the impact of wind power volatility on power system scheduling,this paper adopts the wind-storage combined unit to improve the dispatchability of wind energy.And a three-level optimal scheduling and power ...To mitigate the impact of wind power volatility on power system scheduling,this paper adopts the wind-storage combined unit to improve the dispatchability of wind energy.And a three-level optimal scheduling and power allocation strategy is proposed for the system containing the wind-storage combined unit.The strategy takes smoothing power output as themain objectives.The first level is the wind-storage joint scheduling,and the second and third levels carry out the unit combination optimization of thermal power and the power allocation of wind power cluster(WPC),respectively,according to the scheduling power of WPC and ESS obtained from the first level.This can ensure the stability,economy and environmental friendliness of the whole power system.Based on the roles of peak shaving-valley filling and fluctuation smoothing of the energy storage system(ESS),this paper decides the charging and discharging intervals of ESS,so that the energy storage and wind power output can be further coordinated.Considering the prediction error and the output uncertainty of wind power,the planned scheduling output of wind farms(WFs)is first optimized on a long timescale,and then the rolling correction optimization of the scheduling output of WFs is carried out on a short timescale.Finally,the effectiveness of the proposed optimal scheduling and power allocation strategy is verified through case analysis.展开更多
Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid ...Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid RESs is a vital challenge in a stand-alone environment.The meta-heuristic algorithms proposed in the past are dependent on algorithm-specific parameters for achieving an optimal solution.This paper proposes a hybrid algorithm of Jaya and a teaching–learning-based optimization(TLBO)named the JLBO algorithm for the optimal unit sizing of a PV–WT–battery hybrid system to satisfy the consumer’s load at minimal total annual cost(TAC).The reliability of the system is considered by a maximum allowable loss of power supply probability(LPSPmax)concept.The results obtained from the JLBO algorithm are compared with the original Jaya,TLBO,and genetic algorithms.The JLBO results show superior performance in terms of TAC,and the PV–WT–battery hybrid system is found to be the most economical scenario.This system provides a cost-effective solution for all proposed LPSPmax values as compared with PV–battery and WT–battery systems.展开更多
In this paper, the impact of the wind power generation system on the total cost and profit of the system is studied by using the proposed procedure of binary Sine Cosine (BSC) optimization algorithm with optimal prior...In this paper, the impact of the wind power generation system on the total cost and profit of the system is studied by using the proposed procedure of binary Sine Cosine (BSC) optimization algorithm with optimal priority list (OPL) algorithm. As well, investigate the advantages of system transformation from a regulated system to a deregulated system and the difference in the objective functions of the two systems. The suggested procedure is carried out in two parallel algorithms;The goal of the first algorithm is to reduce the space of searching by using OPL, while the second algorithm adjusts BSC to get the optimal economic dispatch with minimum operation cost of the unit commitment (UCP) problem in the regulated system. But, in the deregulated system, the second algorithm adopts the BSC technique to find the optimal solution to the profit-based unit commitment problem (PBUCP), through the fast of researching the BSC technique. The proposed procedure is applied to IEEE 10-unit test system integrated with the wind generator system. While the second is an actual system in the Egyptian site at Hurghada. The results of this algorithm are compared with previous literature to illustrate the efficiency and capability of this algorithm. Based on the results obtained in the regulated system, the suggested procedure gives better results than the algorithm in previous literature, saves computational efforts, and increases the efficiency of the output power of each unit in the system and lowers the price of kWh. Besides, in the deregulated system the profit is high and the system is more reliable.展开更多
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金supported by the Science and Technology Development Project of Jilin Province(Project No.YDZJ202301ZYTS284).
文摘With the increasing penetration of renewable energy,the coordination of energy storage with thermal power for frequency regulation has become an effective means to enhance grid frequency security.Addressing the challenge of improving the frequency regulation performance of a thermal-storage primary frequency regulation system while reducing its associated losses,this paper proposes a multi-dimensional cooperative optimization strategy for the control parameters of a combined thermal-storage system,considering regulation losses.First,the frequency regulation losses of various components within the thermal power unit are quantified,and a calculation method for energy storage regulation loss is proposed,based on Depth of Discharge(DOD)and C-rate.Second,a thermal-storage cooperative control method based on series compensation is developed to improve the system’s frequency regulation performance.Third,targeting system regulation loss cost and regulation output,and considering constraints on output overshoot and system parameters,an improved Particle Swarm Optimization(PSO)algorithm is employed to tune the parameters of the low-pass filter and the series compensator,thereby reducing regulation losses while enhancing performance.Finally,simulation results demonstrate that the total loss cost of the proposed control strategy is comparable to that of a system with only thermal power participation.However,the thermal power loss cost is reduced by 42.16%compared to the thermal-only case,while simultaneously improving system frequency stability.Thus,the proposed strategy effectively balances system frequency stability and economic efficiency.
文摘As power systems expand,solving the unit commitment problem(UCP)becomes increasingly challenging due to the curse of dimensionality,and traditional methods often struggle to balance computational efficiency and solution optimality.To tackle this issue,we propose a problem-structure-informed quantum approximate optimization algorithm(QAOA)framework that fully exploits the quantum advantage under extremely limited quantum resources.Specifically,we leverage the inherent topological structure of power systems to decompose large-scale UCP instances into smaller subproblems,which are solvable in parallel by limited number of qubits.This decomposition not only circumvents the current hardware limitations of quantum computing but also achieves higher performance as the graph structure of the power system becomes more sparse.Consequently,our approach can be extended to future power systems that are larger and more complex.
基金The National Natural Science Foundation of China(No.51176031)
文摘Based on tests and theoretical calculation an optimum steam admission mode is proposed which can effectively solve the steam-excited vibration.An operation mode jointly considering the valve point and operation load is proposed based on the analysis and study of a large number of unit operation optimization methods.According to the steam-excited vibration that occurs during the optimization process when the nozzle governing steam turbine switches from a single valve to multi-valves a steam admission optimization program is proposed.This comprehensive program considering the steam-excited vibration is applied to a 600 MW steam turbine unit to obtain the optimum sliding pressure curve and the optimum operation mode and the steam-excited vibration is solved successfully.
基金supported by China National Science and Technology Major Project(2011ZX05009-004,2011ZX05014-003)National Key Basic Research and Development Program(973 Program),China(2011CB201006)Science Foundation of China University of Petroleum,Beijing(2462014YJRC053)
文摘With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.
基金The National Natural Science Foundation of China(No.51576041,51506029)
文摘A model-assistant extended state observer(MESO)-based decoupling control strategy is proposed for boiler-turbine units in the presence of unknown external disturbance and model-plant mismatch. For ease of implementation, the decoupling compensator is reduced to the proportion integration(PI) decoupler with the frequency domain analysis, where the decoupling error in collusion of uncertainties and disturbances can be estimated by the proposed MESO and then compensated. To decrease the sensitivity of the dynamic error for the decoupling control and fulfill various requirements of constraints, such as safety operation, energy conservation, emission reduction, etc., the plant is transmitted through a scheduled steady state region which is achieved from the optimized reference governor in advance. Simulation results show that the proposed control strategy can well suppress various disturbances including a decoupling error, and multi-objective optimization can meet multiple requirements with the premise of safety production.
文摘Electric power system is one of the most important and complex engineering in modern society, supplying main and general power for social production and social life. Meanwhile, since it is a productive system with both high input and output, it has an obvious economic significance to improve its operating efficiency. For an example, an unit is 10 GW scale, if its standard coal consumption can be decreased with 1 g/kW·h, it can save about 5 000 tons standard coal per year. It will be discussed mainly that how to establish optimization model and its numerical algorithm for operating management of the electric power system. The idea on establishing optimization model is how to dispatch work state of units or power plants, so that total cost of fuel consumption for generation is reduced to the minimum. Here the dispatch is to decide which unit or plant to operate, which unit or plant to stop running, how much power should be generated for those operating units or plants at each given time interval.
文摘This article has summarized the optimized measures relating to the loading of catalyst,and the sixth operating cycle of the residue hydrotreating unit at SINOPEC's Maoming Branch Company,and made a detailed comparison on the impurities removal rate,hydrogen consumption and energy consumption of the sixth operating cycle with those achieved by the previous five cycles.Test results have revealed that the second-generation RHT series novel residue hydrotreating catalysts featured high activity,good stability,and long operating cycle and could remarkably reduce the hydrogen consumption and energy consumption of process unit.The hydrotreated AR product,having low Conradson carbon residue,low sulfur content,low metal content,high content of saturated hydrocarbons,and low content of asphaltenes and resins,is an excellent FCC feed.Judging from their overall property the second-generation RHT series of residue hydrotreating catalysts used in the sixth operating cycle have commanded a leading position among other catalysts used in previous operating cycles.
基金supported by Projects of Shanghai Science and Technology Community (No. 10ZR1411800,No. 08160705900,No. 08160512100)Shanghai University "the 11th Five-Year Plan"+1 种基金211 Construction ProjectMechatronics Engineering Innovation Group Project from Shanghai Education Commission
文摘Coordinated controller tuning of the boiler turbine unit is a challenging task due to the nonlinear and coupling characteristics of the system.In this paper,a new variant of binary particle swarm optimization （PSO） algorithm,called probability based binary PSO （PBPSO）,is presented to tune the parameters of a coordinated controller.The simulation results show that PBPSO can effectively optimize the control parameters and achieves better control performance than those based on standard discrete binary PSO,modified binary PSO,and standard continuous PSO.
基金Project supported by the National Science and Technology Major Project“Technologies for the Safe and Efficient Operation of Gathering and Purification System in High-Sulfur Gas Fields”(No.2016ZX05017-004).
文摘To increase purified gas production and reduce the comprehensive energy consumption of high-sulfur natural gas sweetening unit,a process simulation model was established by using ProMax based on the field operation data in the Sinopec Puguang Natural Gas Purification Plant.Then,sensitivity analysis and optimization study were carried out on the main operating parameters,including circulation rates,the concen-trations and the inlet temperatures of primary and secondary absorption towers of MDEA(methyldiethanolamine)solutions.Furthermore,the effects of reduction of the feed gas load and pressure and increasement of H_(2)S content on the quality and yield rates of purified gas were analyzed under the optimized operating conditions with the actual field situations.And the following research results were obtained.First,the absorption selectivity of MDEA solutions can be improved by decreasing the circulation rates,concentrations and inlet temperatures of MDEA solutions,which is favorable for the increase of the yield rates of purified gas.Specifically,the circulation rate of MDEA solution is the main factor influencing the comprehensive energy consumption of a high-sulfur natural gas sweetening unit.Second,when the flow rate,pressure and H 2S content of feed gas fluctuate,the purification requirements can be satisfied under the optimized operating conditions.Third,energy con-servation under low flow rates of feed gas can be achieved by reducing the flow rates of regenerated steam and adjusting the position of MDEA solutions entering the secondary absorption tower.Fourth,as H_(2)S content is increased by 1%,it is necessary to increase the circulation rate of MDEA solution by about 20×10^(3)kg/h.Fifth,after parameter optimization,the yield rate of purified gas is increased by 0.5%and the comprehensive energy consumption is reduced by 19.1%under the operating condition of full load.
基金supported by the National Natural Science Foundation of China (623B2028).
文摘The advanced fin-shaped field-effect transistor(FinFET)technology offers higher integration density and stronger channel control capabilities,however,more complex process effects are also introduced which have significant influence on device performance.To address these issues,we complete a design-technology co-optimization(DTCO)focused on FinFET,including both process-induced effect during gate formation and corresponding digital unit optimization design.The 14 nm Fin-FET complementary metal oxide semiconductor(CMOS)technology is used to illustrate the sensitivity of transistor perfor-mance to process-induced effect,specifically the poly pitch effect(PPE)and cut poly effect(CPE).Predictive technology com-puter aided design(TCAD)simulations have been carried out to evaluate the transistor performance in advance.Based on the results,optimizations in digital unit design is proposed.Fall delay of the digital unit inverter is decreased by 0.7%,and the rise delay is decreased by 2.1%.For multiple selector(MUX2NV),the delay decreases by 4.64%for rise and 3.56%for drop,respec-tively.
基金This work was supported by Institute of Information&communications Technology Planning&Evaluation(IITP)grant funded by the Korea government(MSIT)(No.2020-0-00107,Development of the technology to automate the recommendations for big data analytic models that define data characteristics and problems).
文摘Rooftop units(RTUs)were commonly employed in small commercial buildings that represent that can frequently do not take the higher level maintenance that chillers receive.Fault detection and diagnosis(FDD)tools can be employed for RTU methods to ensure essential faults are addressed promptly.In this aspect,this article presents an Optimal Deep Belief Network based Fault Detection and Classification on Packaged Rooftop Units(ODBNFDC-PRTU)model.The ODBNFDC-PRTU technique considers fault diagnosis as amulti-class classification problem and is handled usingDL models.For fault diagnosis in RTUs,the ODBNFDC-PRTU model exploits the deep belief network(DBN)classification model,which identifies seven distinct types of faults.At the same time,the chicken swarm optimization(CSO)algorithm-based hyperparameter tuning technique is utilized for resolving the trial and error hyperparameter selection process,showing the novelty of the work.To illustrate the enhanced performance of the ODBNFDC-PRTU algorithm,a comprehensive set of simulations are applied.The comparison study described the improvement of the ODBNFDC-PRTU method over other recent FDD algorithms with maximum accuracy of 99.30%and TPR of 93.09%.
基金funded by Taif University,Taif,Saudi Arabia,project number(TU-DSPP-2024-17)。
文摘Advanced technologies like Cyber-Physical Systems(CPS)and the Internet of Things(IoT)have supported modernizing and automating the transportation region through the introduction of Intelligent Transportation Systems(ITS).Integrating CPS-ITS and IoT provides real-time Vehicle-to-Infrastructure(V2I)communication,supporting better traffic management,safety,and efficiency.These technological innovations generate complex problems that need to be addressed,uniquely about data routing and Task Scheduling(TS)in ITS.Attempts to solve those problems were primarily based on traditional and experimental methods,and the solutions were not so successful due to the dynamic nature of ITS.This is where the scope of Machine learning(ML)and Swarm Intelligence(SI)has significantly impacted dealing with these challenges;in this line,this research paper presents a novel method for TS and data routing in the CPS-ITS.This paper proposes using a cutting-edge ML algorithm for data transmission from CPS-ITS.This ML has Gated Linear Unit-approximated Reinforcement Learning(GLRL).Greedy Iterative-Particle Swarm Optimization(GI-PSO)has been recommended to develop the Particle Swarm Optimization(PSO)for TS.The primary objective of this study is to enhance the security and effectiveness of ITS systems that utilize CPS-ITS.This study trained and validated the models using a network simulation dataset of 50 nodes from numerous ITS environments.The experiments demonstrate that the proposed GLRL reduces End-toEnd Delay(EED)by 12%,enhances data size use from 83.6%to 88.6%,and achieves higher bandwidth allocation,particularly in high-demand scenarios such as multimedia data streams where adherence improved to 98.15%.Furthermore,the GLRL reduced Network Congestion(NC)by 5.5%,demonstrating its efficiency in managing complex traffic conditions across several environments.The model passed simulation tests in three different environments:urban(UE),suburban(SE),and rural(RE).It met the high bandwidth requirements,made task scheduling more efficient,and increased network throughput(NT).This proved that it was robust and flexible enough for scalable ITS applications.These innovations provide robust,scalable solutions for real-time traffic management,ultimately improving safety,reducing NC,and increasing overall NT.This study can affect ITS by developing it to be more responsive,safe,and effective and by creating a perfect method to set up UE,SE,and RE.
文摘This paper covers the hicles. Different from the traditional trajectory optimization design problem ＂once downward＂ movement principle of a class of demonstration flight test ve of negative attack angle, the ＂twice down ward＂ lower trajectory is proposed based on a SOP algorithm to meet the requirement for validating thermal protec- tion materials, Furthermore, an important advantage of this presented method, compared to the traditional method, is that both trajectory constraints and attitude control constraints are considered. An engineering example is also given to show the advantage and effectiveness of this method,
文摘At present, large centrifugal compressors are widely used in domestic petrochemical plants. This paper describes the control status of compressor control system in domestic petrochemical plants, the optimization scheme to realize energy-saving control and the economic benefits brought to enterprises after control optimization.
基金Supported by the National Natural Science Foundation of China(21006127)the National Basic Research Program of China(2012CB720500)the Science Foundation of China University of Petroleum(KYJJ2012-05-28)
文摘Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operating point and process constraints, which is related to the margins of design variables. Because of various ciisturbances in chemical processes, some distances must be reserved for fluctuations of process variables and the optimum operating point is not on some process constraints. Thus the benefit of steady-state optimization can not be fully achied（ed while that of dynamic optimization can be really achieved. In this study, the steady-state optimizationand dynamic optimization are used, and the potential benefit-is divided into achievable benefit for profit and unachievable benefit for control. The fluid catalytic cracking unit （FCCU） is used for case study. With the analysis on how the margins of design variables influence the economic benefit and control performance, the bottlenecks of process design are found and appropriate control structure can be selected.
基金funded by“The Pearl River Talent Recruitment Program”of Guangdong Province in 2019(Grant No.2019CX01G338)the Research Funding of Shantou University for New Faculty Member(Grant No.NTF19024-2019).
文摘An accurate prediction of earth pressure balance(EPB)shield moving performance is important to ensure the safety tunnel excavation.A hybrid model is developed based on the particle swarm optimization(PSO)and gated recurrent unit(GRU)neural network.PSO is utilized to assign the optimal hyperparameters of GRU neural network.There are mainly four steps:data collection and processing,hybrid model establishment,model performance evaluation and correlation analysis.The developed model provides an alternative to tackle with time-series data of tunnel project.Apart from that,a novel framework about model application is performed to provide guidelines in practice.A tunnel project is utilized to evaluate the performance of proposed hybrid model.Results indicate that geological and construction variables are significant to the model performance.Correlation analysis shows that construction variables(main thrust and foam liquid volume)display the highest correlation with the cutterhead torque(CHT).This work provides a feasible and applicable alternative way to estimate the performance of shield tunneling.
基金supported by the State Grid Jiangsu Electric Power Co.,Ltd.Technology Project(J2023035).
文摘To mitigate the impact of wind power volatility on power system scheduling,this paper adopts the wind-storage combined unit to improve the dispatchability of wind energy.And a three-level optimal scheduling and power allocation strategy is proposed for the system containing the wind-storage combined unit.The strategy takes smoothing power output as themain objectives.The first level is the wind-storage joint scheduling,and the second and third levels carry out the unit combination optimization of thermal power and the power allocation of wind power cluster(WPC),respectively,according to the scheduling power of WPC and ESS obtained from the first level.This can ensure the stability,economy and environmental friendliness of the whole power system.Based on the roles of peak shaving-valley filling and fluctuation smoothing of the energy storage system(ESS),this paper decides the charging and discharging intervals of ESS,so that the energy storage and wind power output can be further coordinated.Considering the prediction error and the output uncertainty of wind power,the planned scheduling output of wind farms(WFs)is first optimized on a long timescale,and then the rolling correction optimization of the scheduling output of WFs is carried out on a short timescale.Finally,the effectiveness of the proposed optimal scheduling and power allocation strategy is verified through case analysis.
文摘Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid RESs is a vital challenge in a stand-alone environment.The meta-heuristic algorithms proposed in the past are dependent on algorithm-specific parameters for achieving an optimal solution.This paper proposes a hybrid algorithm of Jaya and a teaching–learning-based optimization(TLBO)named the JLBO algorithm for the optimal unit sizing of a PV–WT–battery hybrid system to satisfy the consumer’s load at minimal total annual cost(TAC).The reliability of the system is considered by a maximum allowable loss of power supply probability(LPSPmax)concept.The results obtained from the JLBO algorithm are compared with the original Jaya,TLBO,and genetic algorithms.The JLBO results show superior performance in terms of TAC,and the PV–WT–battery hybrid system is found to be the most economical scenario.This system provides a cost-effective solution for all proposed LPSPmax values as compared with PV–battery and WT–battery systems.
文摘In this paper, the impact of the wind power generation system on the total cost and profit of the system is studied by using the proposed procedure of binary Sine Cosine (BSC) optimization algorithm with optimal priority list (OPL) algorithm. As well, investigate the advantages of system transformation from a regulated system to a deregulated system and the difference in the objective functions of the two systems. The suggested procedure is carried out in two parallel algorithms;The goal of the first algorithm is to reduce the space of searching by using OPL, while the second algorithm adjusts BSC to get the optimal economic dispatch with minimum operation cost of the unit commitment (UCP) problem in the regulated system. But, in the deregulated system, the second algorithm adopts the BSC technique to find the optimal solution to the profit-based unit commitment problem (PBUCP), through the fast of researching the BSC technique. The proposed procedure is applied to IEEE 10-unit test system integrated with the wind generator system. While the second is an actual system in the Egyptian site at Hurghada. The results of this algorithm are compared with previous literature to illustrate the efficiency and capability of this algorithm. Based on the results obtained in the regulated system, the suggested procedure gives better results than the algorithm in previous literature, saves computational efforts, and increases the efficiency of the output power of each unit in the system and lowers the price of kWh. Besides, in the deregulated system the profit is high and the system is more reliable.
