A new interpolating method to enhance the resolution of gratings using complementary metal-oxide semiconductor （CMOS） according to the variation of soIne specified spectral light intensities during the motion of sca...A new interpolating method to enhance the resolution of gratings using complementary metal-oxide semiconductor （CMOS） according to the variation of soIne specified spectral light intensities during the motion of scale grating in a periodic separation is proposed. CMOS image sensor （pixel array 648 × 488） was also introduced as receiving device and its stability was verified experimentally. Many factors m the experiment were analyzed theoretically and contrasted with experiment. The advantages of this novel method were featured by CMOS and the specified spectral variation of the energy distribution was discussed.展开更多
In this paper, an improved interpolating moving least-square （IIMLS） method is presented. The shape function of the IIMLS method satisfies the property of the Kronecker 5 function. The weight function used in the II...In this paper, an improved interpolating moving least-square （IIMLS） method is presented. The shape function of the IIMLS method satisfies the property of the Kronecker 5 function. The weight function used in the IIMLS method is nonsingular. Then the IIMLS method can overcome the difficulties caused by the singularity of the weight function in the IMLS method. The number of unknown coefficients in the trial function of the IIMLS method is less than that of the moving least-square （MLS） approximation. Then by combining the IIMLS method with the Galerkin weak form of the potential problem, the improved interpolating element-free Galerkin （IIEFG） method for two-dimensional potential problems is presented. Compared with the conventional element-free Galerkin （EFG） method, the IIEFG method can directly use the essential boundary conditions. Then the IIEFG method has higher accuracy. For demonstration, three numerical examples are solved using the IIEFG method.展开更多
An interpolating reproducing kernel particle method for two-dimensional （2D） scatter points is introduced. It elim- inates the dependency of gridding in numerical calculations. The interpolating shape function in th...An interpolating reproducing kernel particle method for two-dimensional （2D） scatter points is introduced. It elim- inates the dependency of gridding in numerical calculations. The interpolating shape function in the interpolating repro- ducing kernel particle method satisfies the property of the Kronecker delta function. This method offers a mathematics basis for recognition technology and simulation analysis, which can be expressed as simultaneous differential equations in science or project problems. Mathematical examples are given to show the validity of the interpolating reproducing kernel particle method.展开更多
Based on the improved interpolating moving least-squares （ⅡMLS） method and the Galerkin weak form, an improved interpolating element-free Galerkin （ⅡEFG） method is presented for two-dimensional elasticity proble...Based on the improved interpolating moving least-squares （ⅡMLS） method and the Galerkin weak form, an improved interpolating element-free Galerkin （ⅡEFG） method is presented for two-dimensional elasticity problems in this paper. Compared with the interpolating moving least-squares （IMLS） method presented by Lancaster, the ⅡMLS method uses the nonsingular weight function. The number of unknown coefficients in the trial function of the ⅡMLS method is less than that of the MLS approximation and the shape function of the ⅡMLS method satisfies the property of Kronecker δ function. Thus in the ⅡEFG method, the essential boundary conditions can be applied directly and easily, then the numerical solutions can be obtained with higher precision than those obtained by the interpolating element-free Galerkin （IEFG） method. For the purposes of demonstration, four numerical examples are solved using the ⅡEFG method.展开更多
In this paper,general interpolating isogeometric boundary node method(IIBNM)and isogeometric boundary element method(IBEM)based on parameter space are proposed for 2D elasticity problems.In both methods,the integral c...In this paper,general interpolating isogeometric boundary node method(IIBNM)and isogeometric boundary element method(IBEM)based on parameter space are proposed for 2D elasticity problems.In both methods,the integral cells and elements are defined in parameter space,which can reproduce the geometry exactly at all the stages.In IIBNM,the improved interpolating moving leastsquare method(IIMLS)is applied for field approximation and the shape functions have the delta function property.The Lagrangian basis functions are used for field approximation in IBEM.Thus,the boundary conditions can be imposed directly in both methods.The shape functions are defined in 1D parameter space and no curve length needs to be computed.Besides,most methods for the treatment of the singular integrals in the boundary element method can be applied in IIBNM and IBEM directly.Numerical examples have demonstrated the accuracy of the proposed methods.展开更多
The element-free Galerkin(EFG)method,which constructs shape functions via moving least squares(MLS)approximation,represents a fundamental and widely studied meshless method in numerical computation.Although it achieve...The element-free Galerkin(EFG)method,which constructs shape functions via moving least squares(MLS)approximation,represents a fundamental and widely studied meshless method in numerical computation.Although it achieves high computational accuracy,the shape functions are more complex than those in the conventional finite element method(FEM),resulting in great computational requirements.Therefore,improving the computational efficiency of the EFG method represents an important research direction.This paper systematically reviews significant contributions fromdomestic and international scholars in advancing the EFGmethod.Including the improved element-free Galerkin(IEFG)method,various interpolating EFG methods,four distinct complex variable EFG methods,and a series of dimension splitting meshless methods.In the numerical examples,the effectiveness and efficiency of the three methods are validated by analyzing the solutions of the IEFG method for 3D steadystate anisotropic heat conduction,3D elastoplasticity,and large deformation problems,as well as the performance of two-dimensional splitting meshless methods in solving the 3D Helmholtz equation.展开更多
The operator splitting method is used to deal with the Navier-Stokes equation, in which the physical process described by the equation is decomposed into two processes： a diffusion process and a convection process; a...The operator splitting method is used to deal with the Navier-Stokes equation, in which the physical process described by the equation is decomposed into two processes： a diffusion process and a convection process; and the finite element equation is established. The velocity field in the element is described by the shape function of the isoparametric element with nine nodes and the pressure field is described by the interpolation function of the four nodes at the vertex of the isoparametric element with nine nodes. The subroutine of the element and the integrated finite element code are generated by the Finite Element Program Generator （FEPG） successfully. The numerical simulation about the incompressible viscous liquid flowing over a cylinder is carded out. The solution agrees with the experimental results very well.展开更多
Spatial interpolation is a common tool used in the study of fishery ecology, especially for the construction of ecosystem models. To develop an appropriate interpolation method of determining fishery resources density...Spatial interpolation is a common tool used in the study of fishery ecology, especially for the construction of ecosystem models. To develop an appropriate interpolation method of determining fishery resources density in the Yellow Sea, we tested four frequently used methods, including inverse distance weighted interpolation(IDW), global polynomial interpolation(GPI), local polynomial interpolation(LPI) and ordinary kriging(OK).A cross-validation diagnostic was used to analyze the efficacy of interpolation, and a visual examination was conducted to evaluate the spatial performance of the different methods. The results showed that the original data were not normally distributed. A log transformation was then used to make the data fit a normal distribution. During four survey periods, an exponential model was shown to be the best semivariogram model in August and October 2014, while data from January and May 2015 exhibited the pure nugget effect.Using a paired-samples t test, no significant differences(P>0.05) between predicted and observed data were found in all four of the interpolation methods during the four survey periods. Results of the cross-validation diagnostic demonstrated that OK performed the best in August 2014, while IDW performed better during the other three survey periods. The GPI and LPI methods had relatively poor interpolation results compared to IDW and OK. With respect to the spatial distribution, OK was balanced and was not as disconnected as IDW nor as overly smooth as GPI and LPI, although OK still produced a few 'bull's-eye' patterns in some areas.However, the degree of autocorrelation sometimes limits the application of OK. Thus, OK is highly recommended if data are spatially autocorrelated. With respect to feasibility and accuracy, we recommend IDW to be used as a routine interpolation method. IDW is more accurate than GPI and LPI and has a combination of desirable properties, such as easy accessibility and rapid processing.展开更多
Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the lo...Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the local strain.Mechanical properties of 2-D textile fabric reinforced ceramic matrix composites are predicted by NICM.Microstructures of 2-D woven and braided fabric reinforced composite are modeled by two kinds of RVE scheme.NICM is used to predict the macroscopic mechanical properties.The fill and warp yarns are simulated with cubic B-spline and their undulating forms are approximated by sinusoid.The effect of porosity on the fiber and matrix are considered as a reduction of elastic module.The connection of microstructure parameters and fiber volume fraction is modeled to investigate the reflection on the mechanical properties.The results predicted by NICM are compared with that by the finite element method（FEM）.The comparison shows that NICM is a valid and feasible method for predicting the mechanics properties of 2-D woven and braided fabric reinforced ceramic matrix composites.展开更多
In this paper, we use a univariate multiquadric quasi-interpolation scheme to solve the one-dimensional nonlinear sine-Gordon equation that is related to many physical phenomena. We obtain a numerical scheme by using ...In this paper, we use a univariate multiquadric quasi-interpolation scheme to solve the one-dimensional nonlinear sine-Gordon equation that is related to many physical phenomena. We obtain a numerical scheme by using the derivative of the quasi-interpolation to approximate the spatial derivative and a difference scheme to approximate the temporal derivative. The advantage of the obtained scheme is that the algorithm is very simple so that it is very easy to implement. The results of numerical experiments are presented and compared with analytical solutions to confirm the good accuracy of the presented scheme.展开更多
In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This st...In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This study combines the DIE method with the moving Kriging interpolation to present a boundary-type meshfree method, and the corresponding formulae of the MKIBNM are derived. In the present method, the moving Kriging interpolation is applied instead of the traditional moving least-square approximation to overcome Kronecker＇s delta property, then the boundary conditions can be imposed directly and easily. To verify the accuracy and stability of the present formulation, three selected numerical examples are presented to demonstrate the efficiency of MKIBNM numerically.展开更多
The interpolating moving least-squares （IMLS） method is discussed first in this paper. And the formulae of the IMLS method obtained by Lancaster are revised. Then on the basis of the boundary element-free method （B...The interpolating moving least-squares （IMLS） method is discussed first in this paper. And the formulae of the IMLS method obtained by Lancaster are revised. Then on the basis of the boundary element-free method （BEFM）, combining the boundary integral equation （BIE） method with the IMLS method, the improved boundary element-free method （IBEFM） for two-dimensional potential problems is presented, and the corresponding formulae of the IBEFM are obtained. In the BEFM, boundary conditions are applied directly, but the shape function in the MLS does not satisfy the property of the Kronecker ~ function. This is a problem of the BEFM, and must be solved theoretically. In the IMLS method, when the shape function satisfies the property of the Kronecker 5 function, then the boundary conditions, in the meshless method based on the IMLS method, can be applied directly. Then the IBEFM, based on the IMLS method, is a direct meshless boundary integral equation method in which the basic unknown quantity is the real solution of the nodal variables, and the boundary conditions can be applied directly and easily, thus it gives a greater computational precision. Some numerical examples are presented to demonstrate the method.展开更多
Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed ...Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed for linear elasticity. Compared to DHBNM, RPIM is exploited to replace the moving least square （MLS） in DHRBNM, and it gets rid of the deficiency of MLS approximation, in which shape functions lack the delta function property, the boundary condition can not be applied easily and directly and it＇s computational expense is high. Besides, different approximate functions are discussed in DRM to get the interpolation property, in which the accuracy and efficiency for different basis functions are compared. Then RPIM is also applied in DRM to replace the conical function interpolation, which can greatly improve the accuracy of the present method. To demonstrate the effectiveness of the present method, DHBNM is applied for comparison, and some numerical examples of 2-D elasticity problems show that the present method is much more effective than DHBNM.展开更多
Interpolation methods in ArcGIS_ESRI Geostatistical Analyst tool allow obtaining unknown values at unsampled points from observed data and generating continuous surfaces. In this paper, forest data variables as tree h...Interpolation methods in ArcGIS_ESRI Geostatistical Analyst tool allow obtaining unknown values at unsampled points from observed data and generating continuous surfaces. In this paper, forest data variables as tree height and diameter measured in two plots in Central Mountains in Spain. These data were georeferenced to obtain maps that can visualize the spatial variability of these forest variables. In order to evaluate the best interpolation method that could adequately explain the spatial variability of those variables, two interpolation methods were studied： inverse results was made by means of statistical methods to analyze distance weighted （IDW） and Ordinary Kriging （OK）. A comparison of residuals. Results with the kriging method were slightly better.展开更多
Regional estimates of evapotranspiration （ET） are critical for a wide range of applications. Satellite remote sensing is a promising tool for obtaining reasonable ET spatial distribution data. However, there are at ...Regional estimates of evapotranspiration （ET） are critical for a wide range of applications. Satellite remote sensing is a promising tool for obtaining reasonable ET spatial distribution data. However, there are at least two major problems that exist in the regional estimation of ET from remote sensing data. One is the conflicting requirements of simple data over a wide region, and accuracy of those data. The second is the lack of regional ET products that cover the entire region of northern China. In this study, we first retrieved the evaporative fraction （EF） by interpolating from the difference of day/night land surface temperature （AT） and the normalized difference vegetation index （NDVI） triangular-shaped scatter space. Then, ET was generated from EF and land surface meteorological data. The estimated eight-day EF and ET results were validated with 14 eddy covariance （EC） flux measurements in the growing season （July September） for the year 2008 over the study area. The estimated values agreed well with flux tower measurements, and this agreement was highly statistically significant for both EF and ET （p 〈0.01）, with the correlation coefficient for EF （R2=0.64） being relatively higher than for ET （R2---0.57）. Validation with EC-measured ET showed the mean RMSE and bias were 0.78 mm d-1 （22.03 W m-2） and 0.31 mm d-1 （8.86 W m-2）, respectively. The ET over the study area increased along a clear longitudinal gradient, which was probably controlled by the gradient of precipitation, green vegetation fractions, and the intensity of human activities. The satellite-based estimates adequately captured the spatial and seasonal structure of ET. Overall, our results demonstrate the potential of this simple but practical method for monitoring ET over regions with heterogeneous surface areas.展开更多
Spatial-temporal distribution of marine fishes is strongly influenced by environmental factors.To obtain a more continuous distribution of these variables usually measured by stationary sampling designs,spatial interp...Spatial-temporal distribution of marine fishes is strongly influenced by environmental factors.To obtain a more continuous distribution of these variables usually measured by stationary sampling designs,spatial interpolation methods(SIMs)is usually used.However,different SIMs may obtain varied estimation values with significant differences,thus affecting the prediction of fish spatial distribution.In this study,different SIMs were used to obtain continuous environmental variables(water depth,water temperature,salinity,dissolved oxygen(DO),p H,chlorophyll a and chemical oxygen demand(COD))in the Changjiang River Estuary(CRE),including inverse distance weighted(IDW)interpolation,ordinary Kriging(OK)(semivariogram model:exponential(OKE),Gaussian(OKG)and spherical(OKS))and radial basis function(RBF)(regularized spline function(RS)and tension spline function(TS)).The accuracy and effect of SIMs were cross-validated,and two-stage generalized additive model(GAM)was used to predict the distribution of Coilia nasus from 2012 to 2014 in CRE.DO and COD were removed before model prediction due to their autocorrelation coefficient based on variance inflation factors analysis.Results showed that the estimated values of environmental variables obtained by the different SIMs differed(i.e.,mean values,range etc.).Cross-validation revealed that the most suitable SIMs of water depth and chlorophyll a was IDW,water temperature and salinity was RS,and p H was OKG.Further,different interpolation results affected the predicted spatial distribution of Coilia nasus in the CRE.The mean values of the predicted abundance were similar,but the differences between and among the maximum value were large.Studies showed that different SIMs can affect estimated values of the environmental variables in the CRE(especially salinity).These variations further suggest that the most applicable SIMs to each variable will also differ.Thus,it is necessary to take these potential impacts into consideration when studying the relationship between the spatial distribution of fishes and environmental changes in the CRE.展开更多
Due to limited financial resources and challenging geographical conditions, the number of seismic observation networks in China is still very small and they are not widely distributed. Therefore, the available earthqu...Due to limited financial resources and challenging geographical conditions, the number of seismic observation networks in China is still very small and they are not widely distributed. Therefore, the available earthquake records obtained after an earthquake have been limited. In this paper, auto-generation methods to obtain strong motion isolines under different conditions are proposed. To verify the accuracy of these methods, some examples, including application to the 2008 Wenchuan earthquake, are given.展开更多
This paper presents a quasi-static implicit generalized interpolation material point method(i GIMP)with B-bar approach for large deformation geotechnical problems.The i GIMP algorithm is an extension of the implicit m...This paper presents a quasi-static implicit generalized interpolation material point method(i GIMP)with B-bar approach for large deformation geotechnical problems.The i GIMP algorithm is an extension of the implicit material point method(iMPM).The global stiffness matrix is formed explicitly and the Newton-Raphson iterative method is used to solve the equilibrium equations.Where possible,the implementation procedure closely follows standard finite element method(FEM)approaches to allow easy conversion of other FEM codes.The generalized interpolation function is assigned to eliminate the inherent cell crossing noise within conventional MPM.For the first time,the B-bar approach is used to overcome volumetric locking in standard GIMP method for near-incompressible non-linear geomechanics.The proposed i GIMP was tested and compared with i MPM and analytical solutions via a 1 D column compression problem.Results highlighted the superiority of the i GIMP approach in reducing stress oscillations,thereby improving computational accuracy.Then,elasto-plastic slope stabilities and rigid footing problems were considered,further illustrating the ability of the proposed method to overcome volumetric locking due to incompressibility.Results showed that the proposed i GIMP with B-bar approach can be used to simulate geotechnical problems with large deformations.展开更多
By introducing the dimensional splitting(DS)method into the multiscale interpolating element-free Galerkin(VMIEFG)method,a dimension-splitting multiscale interpolating element-free Galerkin(DS-VMIEFG)method is propose...By introducing the dimensional splitting(DS)method into the multiscale interpolating element-free Galerkin(VMIEFG)method,a dimension-splitting multiscale interpolating element-free Galerkin(DS-VMIEFG)method is proposed for three-dimensional(3D)singular perturbed convection-diffusion(SPCD)problems.In the DSVMIEFG method,the 3D problem is decomposed into a series of 2D problems by the DS method,and the discrete equations on the 2D splitting surface are obtained by the VMIEFG method.The improved interpolation-type moving least squares(IIMLS)method is used to construct shape functions in the weak form and to combine 2D discrete equations into a global system of discrete equations for the three-dimensional SPCD problems.The solved numerical example verifies the effectiveness of the method in this paper for the 3D SPCD problems.The numerical solution will gradually converge to the analytical solution with the increase in the number of nodes.For extremely small singular diffusion coefficients,the numerical solution will avoid numerical oscillation and has high computational stability.展开更多
Nowadays, the technology of renewable sources grid-connection and DC transmission has a rapid development. And phasor measurement units(PMUs) become more notable in power grids, due to the necessary of real time monit...Nowadays, the technology of renewable sources grid-connection and DC transmission has a rapid development. And phasor measurement units(PMUs) become more notable in power grids, due to the necessary of real time monitoring and close-loop control applications. However, the PMUs data quality issue affects applications based on PMUs a lot. This paper proposes a simple yet effective method for recovering PMU data. To simply the issue, two different scenarios of PMUs data loss are first defined. Then a key combination of preferred selection strategies is introduced. And the missing data is recovered by the function of spline interpolation. This method has been tested by artificial data and field data obtained from on-site PMUs. The results demonstrate that the proposed method recovers the missing PMU data quickly and accurately. And it is much better than other methods when missing data are massive and continuous. This paper also presents the interesting direction for future work.展开更多
基金This work was supported by the Planning Project of Zhengjiang Technological Department (No.2004C31004)
文摘A new interpolating method to enhance the resolution of gratings using complementary metal-oxide semiconductor （CMOS） according to the variation of soIne specified spectral light intensities during the motion of scale grating in a periodic separation is proposed. CMOS image sensor （pixel array 648 × 488） was also introduced as receiving device and its stability was verified experimentally. Many factors m the experiment were analyzed theoretically and contrasted with experiment. The advantages of this novel method were featured by CMOS and the specified spectral variation of the energy distribution was discussed.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11171208)the Shanghai Leading Academic Discipline Project, China (Grant No. S30106)
文摘In this paper, an improved interpolating moving least-square （IIMLS） method is presented. The shape function of the IIMLS method satisfies the property of the Kronecker 5 function. The weight function used in the IIMLS method is nonsingular. Then the IIMLS method can overcome the difficulties caused by the singularity of the weight function in the IMLS method. The number of unknown coefficients in the trial function of the IIMLS method is less than that of the moving least-square （MLS） approximation. Then by combining the IIMLS method with the Galerkin weak form of the potential problem, the improved interpolating element-free Galerkin （IIEFG） method for two-dimensional potential problems is presented. Compared with the conventional element-free Galerkin （EFG） method, the IIEFG method can directly use the essential boundary conditions. Then the IIEFG method has higher accuracy. For demonstration, three numerical examples are solved using the IIEFG method.
基金supported by the National Natural Science Foundation of China(Grant No.11171208)the Natural Science Foundation of Shanxi Province,China(Grant No.2013011022-6)
文摘An interpolating reproducing kernel particle method for two-dimensional （2D） scatter points is introduced. It elim- inates the dependency of gridding in numerical calculations. The interpolating shape function in the interpolating repro- ducing kernel particle method satisfies the property of the Kronecker delta function. This method offers a mathematics basis for recognition technology and simulation analysis, which can be expressed as simultaneous differential equations in science or project problems. Mathematical examples are given to show the validity of the interpolating reproducing kernel particle method.
基金Project supported by the National Natural Science Foundation of China(Grant No.11171208)the Shanghai Leading Academic Discipline Project,China(Grant No.S30106)
文摘Based on the improved interpolating moving least-squares （ⅡMLS） method and the Galerkin weak form, an improved interpolating element-free Galerkin （ⅡEFG） method is presented for two-dimensional elasticity problems in this paper. Compared with the interpolating moving least-squares （IMLS） method presented by Lancaster, the ⅡMLS method uses the nonsingular weight function. The number of unknown coefficients in the trial function of the ⅡMLS method is less than that of the MLS approximation and the shape function of the ⅡMLS method satisfies the property of Kronecker δ function. Thus in the ⅡEFG method, the essential boundary conditions can be applied directly and easily, then the numerical solutions can be obtained with higher precision than those obtained by the interpolating element-free Galerkin （IEFG） method. For the purposes of demonstration, four numerical examples are solved using the ⅡEFG method.
基金The research for this paper was supported by(1)the National Natural Science Foundation of China(Grants Nos.51708429,51708428)the Open Projects Foundation(Grant No.2017-04-GF)of State Key Laboratory for Health and Safety of Bridge Structures+1 种基金Wuhan Institute of Technology Science Found(Grant No.K201734)the science and technology projects of Wuhan Urban and Rural Construction Bureau(Grants Nos.201831,201919).
文摘In this paper,general interpolating isogeometric boundary node method(IIBNM)and isogeometric boundary element method(IBEM)based on parameter space are proposed for 2D elasticity problems.In both methods,the integral cells and elements are defined in parameter space,which can reproduce the geometry exactly at all the stages.In IIBNM,the improved interpolating moving leastsquare method(IIMLS)is applied for field approximation and the shape functions have the delta function property.The Lagrangian basis functions are used for field approximation in IBEM.Thus,the boundary conditions can be imposed directly in both methods.The shape functions are defined in 1D parameter space and no curve length needs to be computed.Besides,most methods for the treatment of the singular integrals in the boundary element method can be applied in IIBNM and IBEM directly.Numerical examples have demonstrated the accuracy of the proposed methods.
基金supported by the National Natural Science Foundation of China(Grant No.12271341).
文摘The element-free Galerkin(EFG)method,which constructs shape functions via moving least squares(MLS)approximation,represents a fundamental and widely studied meshless method in numerical computation.Although it achieves high computational accuracy,the shape functions are more complex than those in the conventional finite element method(FEM),resulting in great computational requirements.Therefore,improving the computational efficiency of the EFG method represents an important research direction.This paper systematically reviews significant contributions fromdomestic and international scholars in advancing the EFGmethod.Including the improved element-free Galerkin(IEFG)method,various interpolating EFG methods,four distinct complex variable EFG methods,and a series of dimension splitting meshless methods.In the numerical examples,the effectiveness and efficiency of the three methods are validated by analyzing the solutions of the IEFG method for 3D steadystate anisotropic heat conduction,3D elastoplasticity,and large deformation problems,as well as the performance of two-dimensional splitting meshless methods in solving the 3D Helmholtz equation.
文摘The operator splitting method is used to deal with the Navier-Stokes equation, in which the physical process described by the equation is decomposed into two processes： a diffusion process and a convection process; and the finite element equation is established. The velocity field in the element is described by the shape function of the isoparametric element with nine nodes and the pressure field is described by the interpolation function of the four nodes at the vertex of the isoparametric element with nine nodes. The subroutine of the element and the integrated finite element code are generated by the Finite Element Program Generator （FEPG） successfully. The numerical simulation about the incompressible viscous liquid flowing over a cylinder is carded out. The solution agrees with the experimental results very well.
基金The National Basic Research Program of China under contract No.2015CB453303the National Natural Science Foundation of China under contract No.U1405234+1 种基金the Aoshan Science&Technology Innovation Program under contract No.2015ASKJ02-05the Special Fund of the Taishan Scholar Project
文摘Spatial interpolation is a common tool used in the study of fishery ecology, especially for the construction of ecosystem models. To develop an appropriate interpolation method of determining fishery resources density in the Yellow Sea, we tested four frequently used methods, including inverse distance weighted interpolation(IDW), global polynomial interpolation(GPI), local polynomial interpolation(LPI) and ordinary kriging(OK).A cross-validation diagnostic was used to analyze the efficacy of interpolation, and a visual examination was conducted to evaluate the spatial performance of the different methods. The results showed that the original data were not normally distributed. A log transformation was then used to make the data fit a normal distribution. During four survey periods, an exponential model was shown to be the best semivariogram model in August and October 2014, while data from January and May 2015 exhibited the pure nugget effect.Using a paired-samples t test, no significant differences(P>0.05) between predicted and observed data were found in all four of the interpolation methods during the four survey periods. Results of the cross-validation diagnostic demonstrated that OK performed the best in August 2014, while IDW performed better during the other three survey periods. The GPI and LPI methods had relatively poor interpolation results compared to IDW and OK. With respect to the spatial distribution, OK was balanced and was not as disconnected as IDW nor as overly smooth as GPI and LPI, although OK still produced a few 'bull's-eye' patterns in some areas.However, the degree of autocorrelation sometimes limits the application of OK. Thus, OK is highly recommended if data are spatially autocorrelated. With respect to feasibility and accuracy, we recommend IDW to be used as a routine interpolation method. IDW is more accurate than GPI and LPI and has a combination of desirable properties, such as easy accessibility and rapid processing.
基金Supported by the Aviation Science Foundationof China(2009ZB5052)the Specialized Research Foundation for the Doctor Program of Higher Education(20070287039)~~
文摘Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the local strain.Mechanical properties of 2-D textile fabric reinforced ceramic matrix composites are predicted by NICM.Microstructures of 2-D woven and braided fabric reinforced composite are modeled by two kinds of RVE scheme.NICM is used to predict the macroscopic mechanical properties.The fill and warp yarns are simulated with cubic B-spline and their undulating forms are approximated by sinusoid.The effect of porosity on the fiber and matrix are considered as a reduction of elastic module.The connection of microstructure parameters and fiber volume fraction is modeled to investigate the reflection on the mechanical properties.The results predicted by NICM are compared with that by the finite element method（FEM）.The comparison shows that NICM is a valid and feasible method for predicting the mechanics properties of 2-D woven and braided fabric reinforced ceramic matrix composites.
基金supported by the State Key Development Program for Basic Research of China (Grant No 2006CB303102)Science and Technology Commission of Shanghai Municipality,China (Grant No 09DZ2272900)
文摘In this paper, we use a univariate multiquadric quasi-interpolation scheme to solve the one-dimensional nonlinear sine-Gordon equation that is related to many physical phenomena. We obtain a numerical scheme by using the derivative of the quasi-interpolation to approximate the spatial derivative and a difference scheme to approximate the temporal derivative. The advantage of the obtained scheme is that the algorithm is very simple so that it is very easy to implement. The results of numerical experiments are presented and compared with analytical solutions to confirm the good accuracy of the presented scheme.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.10902076)the Natural Science Foundation of Shanxi Province of China(Grant No.2007011009)+1 种基金the Scientific Research and Development Program of the Shanxi Higher Education Institutions(Grant No.20091131)the Doctoral Startup Foundation of Taiyuan University of Science and Technology(Grant No.200708)
文摘In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This study combines the DIE method with the moving Kriging interpolation to present a boundary-type meshfree method, and the corresponding formulae of the MKIBNM are derived. In the present method, the moving Kriging interpolation is applied instead of the traditional moving least-square approximation to overcome Kronecker＇s delta property, then the boundary conditions can be imposed directly and easily. To verify the accuracy and stability of the present formulation, three selected numerical examples are presented to demonstrate the efficiency of MKIBNM numerically.
基金Project supported by the National Natural Science Foundation of China (Grant No 10871124)Innovation Program of Shanghai Municipal Education Commission (Grant No 09ZZ99)Shanghai Leading Academic Discipline Project (Grant No J50103)
文摘The interpolating moving least-squares （IMLS） method is discussed first in this paper. And the formulae of the IMLS method obtained by Lancaster are revised. Then on the basis of the boundary element-free method （BEFM）, combining the boundary integral equation （BIE） method with the IMLS method, the improved boundary element-free method （IBEFM） for two-dimensional potential problems is presented, and the corresponding formulae of the IBEFM are obtained. In the BEFM, boundary conditions are applied directly, but the shape function in the MLS does not satisfy the property of the Kronecker ~ function. This is a problem of the BEFM, and must be solved theoretically. In the IMLS method, when the shape function satisfies the property of the Kronecker 5 function, then the boundary conditions, in the meshless method based on the IMLS method, can be applied directly. Then the IBEFM, based on the IMLS method, is a direct meshless boundary integral equation method in which the basic unknown quantity is the real solution of the nodal variables, and the boundary conditions can be applied directly and easily, thus it gives a greater computational precision. Some numerical examples are presented to demonstrate the method.
基金Project supported by the National Basic Research Program of China (No. 2010CB732006)the CAS/SAFEA International Partnership Program for Creative Research Teams (No. KZCX2-YW-T12)the National Natural Science Foundation of China (No. 11002154)
文摘Combining the radial point interpolation method （RPIM）, the dual reciprocity method （DRM） and the hybrid boundary node method （HBNM）, a dual reciprocity hybrid radial boundary node method （DHRBNM） is proposed for linear elasticity. Compared to DHBNM, RPIM is exploited to replace the moving least square （MLS） in DHRBNM, and it gets rid of the deficiency of MLS approximation, in which shape functions lack the delta function property, the boundary condition can not be applied easily and directly and it＇s computational expense is high. Besides, different approximate functions are discussed in DRM to get the interpolation property, in which the accuracy and efficiency for different basis functions are compared. Then RPIM is also applied in DRM to replace the conical function interpolation, which can greatly improve the accuracy of the present method. To demonstrate the effectiveness of the present method, DHBNM is applied for comparison, and some numerical examples of 2-D elasticity problems show that the present method is much more effective than DHBNM.
文摘Interpolation methods in ArcGIS_ESRI Geostatistical Analyst tool allow obtaining unknown values at unsampled points from observed data and generating continuous surfaces. In this paper, forest data variables as tree height and diameter measured in two plots in Central Mountains in Spain. These data were georeferenced to obtain maps that can visualize the spatial variability of these forest variables. In order to evaluate the best interpolation method that could adequately explain the spatial variability of those variables, two interpolation methods were studied： inverse results was made by means of statistical methods to analyze distance weighted （IDW） and Ordinary Kriging （OK）. A comparison of residuals. Results with the kriging method were slightly better.
基金supported by the National Basic Research Program of China (No. 2012CB956202)the National Natural Science Foundation of China (Grant No. 41105076)+1 种基金the National Special Scientific Research Project for Public Interest (Forestry) (Grant No. GYHY201204105)the National Key Technology R & D Program (Grant No. 2012BAC22B04)
文摘Regional estimates of evapotranspiration （ET） are critical for a wide range of applications. Satellite remote sensing is a promising tool for obtaining reasonable ET spatial distribution data. However, there are at least two major problems that exist in the regional estimation of ET from remote sensing data. One is the conflicting requirements of simple data over a wide region, and accuracy of those data. The second is the lack of regional ET products that cover the entire region of northern China. In this study, we first retrieved the evaporative fraction （EF） by interpolating from the difference of day/night land surface temperature （AT） and the normalized difference vegetation index （NDVI） triangular-shaped scatter space. Then, ET was generated from EF and land surface meteorological data. The estimated eight-day EF and ET results were validated with 14 eddy covariance （EC） flux measurements in the growing season （July September） for the year 2008 over the study area. The estimated values agreed well with flux tower measurements, and this agreement was highly statistically significant for both EF and ET （p 〈0.01）, with the correlation coefficient for EF （R2=0.64） being relatively higher than for ET （R2---0.57）. Validation with EC-measured ET showed the mean RMSE and bias were 0.78 mm d-1 （22.03 W m-2） and 0.31 mm d-1 （8.86 W m-2）, respectively. The ET over the study area increased along a clear longitudinal gradient, which was probably controlled by the gradient of precipitation, green vegetation fractions, and the intensity of human activities. The satellite-based estimates adequately captured the spatial and seasonal structure of ET. Overall, our results demonstrate the potential of this simple but practical method for monitoring ET over regions with heterogeneous surface areas.
基金The Shanghai Municipal Science and Technology Commission Local Capacity Construction Project under contract No.18050502000the Monitoring and Evaluation of National Sea Ranch Demonstration Area Project in Changjiang River Estuary under contract No.171015the National Natural Science Foundation of China under contract No.41906074。
文摘Spatial-temporal distribution of marine fishes is strongly influenced by environmental factors.To obtain a more continuous distribution of these variables usually measured by stationary sampling designs,spatial interpolation methods(SIMs)is usually used.However,different SIMs may obtain varied estimation values with significant differences,thus affecting the prediction of fish spatial distribution.In this study,different SIMs were used to obtain continuous environmental variables(water depth,water temperature,salinity,dissolved oxygen(DO),p H,chlorophyll a and chemical oxygen demand(COD))in the Changjiang River Estuary(CRE),including inverse distance weighted(IDW)interpolation,ordinary Kriging(OK)(semivariogram model:exponential(OKE),Gaussian(OKG)and spherical(OKS))and radial basis function(RBF)(regularized spline function(RS)and tension spline function(TS)).The accuracy and effect of SIMs were cross-validated,and two-stage generalized additive model(GAM)was used to predict the distribution of Coilia nasus from 2012 to 2014 in CRE.DO and COD were removed before model prediction due to their autocorrelation coefficient based on variance inflation factors analysis.Results showed that the estimated values of environmental variables obtained by the different SIMs differed(i.e.,mean values,range etc.).Cross-validation revealed that the most suitable SIMs of water depth and chlorophyll a was IDW,water temperature and salinity was RS,and p H was OKG.Further,different interpolation results affected the predicted spatial distribution of Coilia nasus in the CRE.The mean values of the predicted abundance were similar,but the differences between and among the maximum value were large.Studies showed that different SIMs can affect estimated values of the environmental variables in the CRE(especially salinity).These variations further suggest that the most applicable SIMs to each variable will also differ.Thus,it is necessary to take these potential impacts into consideration when studying the relationship between the spatial distribution of fishes and environmental changes in the CRE.
基金The Science Foundation of IEM. No.2009B05The National Key Technology R & D Program.No.2009BAK55B01-02The Science Foundation of IEM. No.2007B11
文摘Due to limited financial resources and challenging geographical conditions, the number of seismic observation networks in China is still very small and they are not widely distributed. Therefore, the available earthquake records obtained after an earthquake have been limited. In this paper, auto-generation methods to obtain strong motion isolines under different conditions are proposed. To verify the accuracy of these methods, some examples, including application to the 2008 Wenchuan earthquake, are given.
基金the National Natural Science Foundation of China(Nos.41807223 and 51908175)the Fundamental Research Funds for the Central Universities(No.B210202096)+1 种基金the Natural Science Foundation of Guangdong Province(No.2018A030310346)the Water Conservancy Science and Technology Innovation Project of Guangdong Province(No.2020-11),China。
文摘This paper presents a quasi-static implicit generalized interpolation material point method(i GIMP)with B-bar approach for large deformation geotechnical problems.The i GIMP algorithm is an extension of the implicit material point method(iMPM).The global stiffness matrix is formed explicitly and the Newton-Raphson iterative method is used to solve the equilibrium equations.Where possible,the implementation procedure closely follows standard finite element method(FEM)approaches to allow easy conversion of other FEM codes.The generalized interpolation function is assigned to eliminate the inherent cell crossing noise within conventional MPM.For the first time,the B-bar approach is used to overcome volumetric locking in standard GIMP method for near-incompressible non-linear geomechanics.The proposed i GIMP was tested and compared with i MPM and analytical solutions via a 1 D column compression problem.Results highlighted the superiority of the i GIMP approach in reducing stress oscillations,thereby improving computational accuracy.Then,elasto-plastic slope stabilities and rigid footing problems were considered,further illustrating the ability of the proposed method to overcome volumetric locking due to incompressibility.Results showed that the proposed i GIMP with B-bar approach can be used to simulate geotechnical problems with large deformations.
基金supported by the Natural Science Foundation of Zhejiang Province,China(Grant Nos.LY20A010021,LY19A010002,LY20G030025)the Natural Science Founda-tion of Ningbo City,China(Grant Nos.2021J147,2021J235).
文摘By introducing the dimensional splitting(DS)method into the multiscale interpolating element-free Galerkin(VMIEFG)method,a dimension-splitting multiscale interpolating element-free Galerkin(DS-VMIEFG)method is proposed for three-dimensional(3D)singular perturbed convection-diffusion(SPCD)problems.In the DSVMIEFG method,the 3D problem is decomposed into a series of 2D problems by the DS method,and the discrete equations on the 2D splitting surface are obtained by the VMIEFG method.The improved interpolation-type moving least squares(IIMLS)method is used to construct shape functions in the weak form and to combine 2D discrete equations into a global system of discrete equations for the three-dimensional SPCD problems.The solved numerical example verifies the effectiveness of the method in this paper for the 3D SPCD problems.The numerical solution will gradually converge to the analytical solution with the increase in the number of nodes.For extremely small singular diffusion coefficients,the numerical solution will avoid numerical oscillation and has high computational stability.
基金supported in part by National Natural Science Foundation of China(NSFC)(51627811,51707064)Project Supported by the National Key Research and Development Program of China(2017YFB090204)Project of State Grid Corporation of China(SGTYHT/16-JS-198)
文摘Nowadays, the technology of renewable sources grid-connection and DC transmission has a rapid development. And phasor measurement units(PMUs) become more notable in power grids, due to the necessary of real time monitoring and close-loop control applications. However, the PMUs data quality issue affects applications based on PMUs a lot. This paper proposes a simple yet effective method for recovering PMU data. To simply the issue, two different scenarios of PMUs data loss are first defined. Then a key combination of preferred selection strategies is introduced. And the missing data is recovered by the function of spline interpolation. This method has been tested by artificial data and field data obtained from on-site PMUs. The results demonstrate that the proposed method recovers the missing PMU data quickly and accurately. And it is much better than other methods when missing data are massive and continuous. This paper also presents the interesting direction for future work.
