Aqueous zinc batteries offer significant potential for large-scale energy storage,wearable devices,and medium-to low-speed transportation due to their safety,affordability,and environmental friendliness.However,the un...Aqueous zinc batteries offer significant potential for large-scale energy storage,wearable devices,and medium-to low-speed transportation due to their safety,affordability,and environmental friendliness.However,the uneven zinc deposition at the anode side caused by localized reaction activity from the passivation layer presents challenges that significantly impact the battery's stability and lifespan.In this study,we have proposed an expandable and maneuverable gel sustained-release(GSR)treatment to polish the Zn metal,which in situ converts its native passivation layer into a composite interphase layer with nanocrystal zinc phosphate and flexible polyvinyl alcohol.Such a thin and uniform interface contributes to fast and homogeneous Zn ion transport and improved anti-corrosion ability,enabling uniform zinc deposition without dendrite growth and thereby improving the battery performance with high-rate ability and long cycle life.This GSR treatment method,characterized by its simplicity,low cost,and universality,facilitates the widespread application of aqueous zinc batteries.展开更多
Gel polymer electrolytes(GPEs)with high flame‐retardant concentration can remarkably reduce the thermal runaway risk of lithium metal batteries(LMBs).However,higher flame‐retardant content in GPEs always leads to in...Gel polymer electrolytes(GPEs)with high flame‐retardant concentration can remarkably reduce the thermal runaway risk of lithium metal batteries(LMBs).However,higher flame‐retardant content in GPEs always leads to increased leakage of active component and severe lithium corrosion,which greatly hinders the service life of LMBs.Herein,GPEs with high‐loading triphenyl phosphate(TPP)are originally fabricated by coaxial electrospinning and stabilized by dual confinement effects,including chemisorption of polyvinylidene fluoride‐hexafluoropropylene(PVDF‐HFP),and physical encapsulation of polyacrylonitrile(PAN)/PVDF‐HFP.These effects arise from the strong polar interactions between the−CF3 group in PVDF‐HFP and P=O group in TPP,as well as the superior anti‐swelling property of PAN.To mitigate TPP‐induced corrosion during cycling,the optimized Li anode is armored with LiF‐rich solid electrolyte interphase(SEI)layer through immersing it in fluoroethylene carbonate‐containing electrolyte.As expected,the corresponding Li||Li symmetric cells deliver long‐term stable cycling behavior over 2400 h at 0.5 mA cm−2,and the LiFePO4||Li batteries hold a high‐capacity retention ratio of 81.7%after 6000 cycles at 10 C with excellent flame retardancy.These findings offer new insight into designing the SEI layer for lithium metal in flame‐retardant electrolytes,thus promoting the development and application of high‐security LMBs.展开更多
High-nickel cathode,LiNi0.8Co0.1Mn0.1O_(2)(NCM811),and sulfide-solid electrolyte are a promising combination for all-solid-state lithium batteries(ASSLBs).However,this combination faces the issue of interfacial instab...High-nickel cathode,LiNi0.8Co0.1Mn0.1O_(2)(NCM811),and sulfide-solid electrolyte are a promising combination for all-solid-state lithium batteries(ASSLBs).However,this combination faces the issue of interfacial instability between the cathode and electrolyte.Given the surface alkalinity of NCM811,we propose a strategy to construct a solid-polymer-electrolyte(SPE)interphase on NCM811 surface by leveraging the surface alkaline residues to nucleophilically initiate the in-situ ring-opening polymerization of cyclic organic molecules.As a proof-of-concept,this study demonstrates that the ring-opening copolymerization of 1,3-dioxolane and maleic anhydride produces a homogeneous,compact,and conformal SPE layer on NCM811 surface to prevent the cathode from contact and reaction with Li6PS5Cl solid-state electrolyte.Consequently,the SPE-modified-NCM811 in ASSLBs exhibits high capacities of 193.5 mA h g^(-1) at 0.2 C,160.9 mA h g^(-1) at 2.0 C and 112.3 mA h g^(-1) at 10 C,and particularly,excellent long-term cycling stabilities over 11000 cycles with a 71.95%capacity retention at 10 C at 25℃,as well as a remained capacity of 117.9 mA h g^(-1) after 8000 cycles at 30 C at 60℃,showing a great application prospect.This study provides a new route for creating electrochemically and structurally stable solid-solid interfaces for ASSLBs.展开更多
Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the...Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.展开更多
The practical application of aqueous zinc-ion batteries for large-grid scale systems is still hindered by uncontrolled zinc dendrite and side reactions.Regulating the elec-trical double layer via the electrode/electro...The practical application of aqueous zinc-ion batteries for large-grid scale systems is still hindered by uncontrolled zinc dendrite and side reactions.Regulating the elec-trical double layer via the electrode/electrolyte interface layer is an effective strategy to improve the stability of Zn anodes.Herein,we report an ultrathin zincophilic ZnS layer as a model regu-lator.At a given cycling current,the cell with Zn@ZnS electrode displays a lower potential drop over the Helmholtz layer(stern layer)and a suppressed diffuse layer,indicating the regulated charge distribution and decreased electric double layer repulsion force.Boosted zinc adsorption sites are also expected as proved by the enhanced electric double-layer capacitance.Consequently,the symmetric cell with the ZnS protection layer can stably cycle for around 3,000 h at 1 mA cm^(-2) with a lower overpotential of 25 mV.When coupled with an I2/AC cathode,the cell demonstrates a high rate performance of 160 mAh g^(-1) at 0.1 A g^(-1) and long cycling stability of over 10,000 cycles at 10 A g^(-1).The Zn||MnO_(2) also sustains both high capacity and long cycling stability of 130 mAh g^(-1) after 1,200 cycles at 0.5 A g^(-1).展开更多
The lithium-ion batteries are recognized as the most promising energy storage system,but it still does not meet the power requirements of electric vehicle batteries owing to low volumetric energy density with the trad...The lithium-ion batteries are recognized as the most promising energy storage system,but it still does not meet the power requirements of electric vehicle batteries owing to low volumetric energy density with the traditional graphite electrode system.In this study,we report the development of a novel electrode system fabricated by implantation of a solid electrolyte interphase(SEI)layer on the graphite surface.The SEI-implanted graphite electrode is made using a lithium bis(trifluoromethanesulfonyl)imide(LiTFSI)-based electrolyte and cycled with a lithium tetrafluoroborate LiBF4-based electrolyte.This new electrode system shows significantly enhanced electrochemical properties owing to the rapid and efficient diffusion of Li ions through the SEI layer between the electrolyte and electrode.This graphite electrode with its pre-formed SEI layer achieves a reversible capacity of 357 mAh g^-1 at 0.5 C after 50 cycles,which is significantly higher than that of commercial lithium-ion battery systems constructed with LiPF6(312mAh g^-1).The resulting unique electrode system could present a new avenue in SEI research for highperformance lithium-ion batteries.展开更多
The interaction of a screw dislocation in the interphase layer with the circular inhomogeneity and matrix was dealt with . An efficient method for multiply connected regions was developed by combining the sectionally ...The interaction of a screw dislocation in the interphase layer with the circular inhomogeneity and matrix was dealt with . An efficient method for multiply connected regions was developed by combining the sectionally subholomorphic function theory, Schwatz symmetric principle and Cauchy integral technique. The Hilbert problem of the complex potentials for three material regions was reduced to a functional equation in the complex potential of the interphase layer, resulting in an explicit series solution . By using the present solution the interaction energy and force acting dislocation were evaluated and discussed.展开更多
All-solid-state lithium-sulfur batteries(ASSLSBs) have become one of the most potential candidates for the next-generation high-energy systems due to their intrinsic safety and high theoretical energy density.However,...All-solid-state lithium-sulfur batteries(ASSLSBs) have become one of the most potential candidates for the next-generation high-energy systems due to their intrinsic safety and high theoretical energy density.However, PEO-based ASSLSBs face the dilemma of insufficient Coulombic efficiency and long-term stability caused by the coupling problems of dendrite growth of anode and polysulfide shuttle of cathode. In this work, 1,3,5-trioxane(TOX) is used as a functional additive to design a PEO-based composite solidstate electrolyte(denoted as TOX-CSE), which realizes the stable long-term cycle of an ASSLSB. The results show that TOX can in-situ decompose on the anode to form a composite solid electrolyte interphase(SEI) layer with rich-organic component. It yields a high average modulus of 5.0 GPa, greatly improving the mechanical stability of the SEI layer and thus inhibiting the growth of dendrites. Also,the robust SEI layer can act as a barrier to block the side reaction between polysulfides and lithium metal.As a result, a Li-Li symmetric cell assembled with a TOX-CSE exhibits prolonged cycling stability over 2000 h at 0.2 m A cm^(-2). The ASSLSB also shows a stable cycling performance of 500 cycles at 0.5 C.This work reveals the structure–activity relationship between the mechanical property of interface layer and the battery's cycling stability.展开更多
Separator modification is an effective approach to suppress dendrite growth to realize high-energy sodium metal batteries(SMBs)in practical applications,however,its success is mainly subject to surface modification.He...Separator modification is an effective approach to suppress dendrite growth to realize high-energy sodium metal batteries(SMBs)in practical applications,however,its success is mainly subject to surface modification.Herein,a separator with multifunctional layers composed of N-doped mesoporous hollow carbon spheres(HCS)as the inner layer and sodium fluoride(NaF)as the outer layer on commercial polypropylene separator(PP)is proposed(PP@HCS-NaF)to achieve stable cycling in SMB.At the molecular level,the inner HCS layer with a high content of pyrrolic-N induces the uniform Na^(+)flux as a potential Na^(+)redistributor for homogenous deposition,whereas its hollow mesoporous structure offers nanoporous buffers and ion channels to regulate Na^(+)ion distribution and uniform deposition.The outer layer(NaF)constructs the NaF-enriched robust solid electrolyte interphase layer,significantly lowering the Na^(+)ions diffusion barrier.Benefiting from these merits,higher electrochemical performances are achieved with multifunctional double-layered PP@HCS-NaF separators compared with single-layered separators(i.e.PP@HCS or PP@NaF)in SMBs.The Na‖Cu half-cell with PP@HCS-NaF offers stable cycling(280 cycles)with a high CE(99.6%),and Na‖Na symmetric cells demonstrate extended lifespans for over 6000 h at 1 mA cm^(-2)with a progressively stable overpotential of 9 mV.Remarkably,in Na‖NVP full-cells,the PP@HCS-NaF separator grants a stable capacity of~81 mA h g^(-1)after 3500 cycles at 1 C and an impressive rate capability performance(~70 mA h g^(-1)at 15 C).展开更多
Lithium(Li)deposition and nucleation at solid electrolyte interphase(SEI)is the main origin for the capacity decay in Li metal batteries(LMBs).SEI conversion with enhanced electrochemical and mechanical properties is ...Lithium(Li)deposition and nucleation at solid electrolyte interphase(SEI)is the main origin for the capacity decay in Li metal batteries(LMBs).SEI conversion with enhanced electrochemical and mechanical properties is an effective approach to achieve uniform nucleation of Li^(+)and stabilize the lithium metal anode.However,complex interfacial reaction mechanisms and interface compatibility issues hinder the development of SEI conversion strategies for stabilizing lithium metal anodes.Herein,we presented the release of I_(3)^(-)in–NH_(2)-modified metal–organic frameworks for a Li metal surface SEI phase conversion strategy.The–NH_(2)group in MOF pores induced the formation of I_(3)^(-)from I_(2),which was further spontaneously reacted with inactive Li_(2)O transforming into high-performance LiI and LiIO_(3)interphase.Furthermore,theoretical calculation provided deeply insight into the unique reconstructed interfacial formation and electrochemical mechanism of rich LiI and LiIO_(3)SEI.As a result,the Li^(+)deposition and nucleation were improved,facilitating the transport kinetics of Li^(+)and inhibiting the growth of lithium dendrites.The assembled solid-state Li||LiFePO_(4)full cells exhibited superior long-term stability of 800 cycles and high Coulombic efficiency(>99%),Li||LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)pouch cell also displayed superior practical performance over 200 cycles at 2 C,high loading of 5 mg cm^(-2)and safety performance.This innovative SEI design strategy promotes the development of high-performance solid-state Li metal batteries.展开更多
Rechargeable zinc-ion batteries have emerged as one of the most promising candidates for large-scale energy storage applications due to their high safety and low cost.However,the use of Zn metal in batteries suffers f...Rechargeable zinc-ion batteries have emerged as one of the most promising candidates for large-scale energy storage applications due to their high safety and low cost.However,the use of Zn metal in batteries suffers from many severe issues,including dendrite growth and parasitic reactions,which often lead to short cycle lives.Herein,we propose the construction of functional organic interfacial layers(OIL)on the Zn metal anodes to address these challenges.Through a well-designed organic-assist pre-construction process,a densely packed artificial layer featuring the immobilized zwitterionic molecular brush can be constructed,which can not only efficiently facilitate the smooth Zn plating and stripping,but also introduce a stable environment for battery reactions.Through density functional theory calculations and experimental characterizations,we verify that the immobilized organic propane sulfonate on Zn anodes can significantly lower the energy barrier and increase the kinetics of Zn^(2+)transport.Thus,the Zn metal anode with the functional OIL can significantly improve the cycle life of the symmetric cell to over 3500 h stable operation.When paired with the H_(2)V_(3)O_(8)cathode,the aqueous Zn-ion full cells can be continuously cycled over 7000 cycles,marking an important milestone for Zn anode development for potential industrial applications.展开更多
Polyethylene oxide(PEO)-based solid polymer electrolytes are considered as promising material for solidstate sodium metallic batteries(SSMBs).However,their poor interfacial stability with high-voltage cathode limits t...Polyethylene oxide(PEO)-based solid polymer electrolytes are considered as promising material for solidstate sodium metallic batteries(SSMBs).However,their poor interfacial stability with high-voltage cathode limits their application in high-energy–density solid-state batteries.Herein,a uniform,sulfur-containing inorganic–organic composite cathode–electrolyte interphase layer was in situ formed by the addition of sodium polyvinyl sulfonate(NaPVS).The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(3)(NVP)|PEOsodium hexauorophosphate(NaPF6)|Na battery shows a higher initial capacity of 111.2 mAh.g^(-1)and an ultra-high capacity retention of 90.5%after 300 cycles.The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF)|PEO-NaPF_(6)|Na battery with the high cutoff voltage of 4.2 V showed a specific discharge capacity of 88.9 mAh.g^(-1)at 0.5C for 100 cycles with a capacity retention of 79%,which is much better than that of the pristine-NVPF(PR-NVPF)|PEO-NaPF_(6)|Na battery(33.2%).The addition of NaPVS not only enhances the diffusion kinetics at the interface but also improves the rate performance and stability of the battery,thus bolstering its viability for high-energy applications.In situ phase tracking further elucidates that NaPVS effectively mitigates self-discharge induced by the oxidative decomposition of PEO at high temperature.This work proposes a general strategy to maintain the structural stability of the cathode–electrolyte interface in PEO-based high-performance SSMBs.展开更多
Spinel LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)cathode draws significant attention in the field of energy storage due to its unique voltage plateau.To further enhance the long-term electrochemical stability of LNMO,the LNMO cath...Spinel LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)cathode draws significant attention in the field of energy storage due to its unique voltage plateau.To further enhance the long-term electrochemical stability of LNMO,the LNMO cathode covered with an ultrathin ZrO_(2)layer was prepared through atomic layer deposition(ALD).It is found that the LNMO cathode deposited with 20 layers of ZrO_(2)(LNMOZ20)exhibits the best electrochemical performance,achieving a high discharge capacity of 117.1 mA·h/g,with a capacity retention of 87.4%after 600 cycles at a current density of 1C.Furthermore,even at higher current densities of 5C and 10C,the LNMOZ20 electrode still demonstrates excellent stability with discharge capacities reaching 111.7 and 103.6 mA·h/g,and capacity retentions maintaining at 81.0%and 101.4%after 2000 cycles,respectively.This study highlights that the incorporation of an ultrathin ZrO_(2)layer by ALD is an effective strategy for enhancing the long-term cycling stability of LNMO cathodes.展开更多
Lithium metal is supposed to be critical material for constructing next-generation batteries due to extremely high capacity and ultralow redox potential. However, the perplexing issue of lithium dendrite growth impede...Lithium metal is supposed to be critical material for constructing next-generation batteries due to extremely high capacity and ultralow redox potential. However, the perplexing issue of lithium dendrite growth impedes the commercial application. The initial nucleation and low Li ions diffusion rate in the electrolyte/electrode interface dominate the deposition behavior. Therefore, a uniform and flexible interface is urgently needed. Here, a facile method is proposed to prepare a thin and porous LiF-rich layer (TPL) by the in-situ reaction of small amount of ammonium hydrogen difluoride (NH4HF2) and Li metal. The deposition morphology on Li metal anode with LiF layer is significantly flat and homogeneous owning to low lateral diffusion barrier on LiF crystals and the porous structure of TPL film. Additionally, the symmetrical cells made with such TPL Li anodes show significantly stable cycling over 100 cycles at high current density of 6 mA/cm^2. The TPL Li|LiFePO4 full cells keep over 99% capacity retention after 100 cycles at 2.0 C. This approach serves as a facile and controllable way of adjusting the protective layer on Li metal.展开更多
Lithium metal batteries are strongly considered as one of the most promising candidates for nextgeneration high-performance battery systems.However,the uncontrollable growth of lithium dendrites and the highly reactiv...Lithium metal batteries are strongly considered as one of the most promising candidates for nextgeneration high-performance battery systems.However,the uncontrollable growth of lithium dendrites and the highly reactive lithium metal result in the severe safety risks and the short lifespan for highenergy-density rechargeable batteries.Here,we demonstrate a hydrophobic and ionically conductive ethylene-vinyl acetate(EVA)copolymer layer can not only endow lithium metal anodes with an air-stable and anti-water surface,but also efficiently suppress the lithium-dendrites growth during the electrochemical cycling process.Therefore,the introduction of the EVA copolymer as a bifunctional protection layer simultaneously improves the anti-water/air performance and electrochemical cycling stability of lithium metal anode.展开更多
Lithium-ion battery has greatly changed our lifestyle and the solid electrolyte interphase(SEI)covered on the graphite anode determines the service life of a battery.The formation method and the formation temperature ...Lithium-ion battery has greatly changed our lifestyle and the solid electrolyte interphase(SEI)covered on the graphite anode determines the service life of a battery.The formation method and the formation temperature at initial cycle of a battery determine the feature of the SEI.Herein,we investigate the gap of formation behavior in both a half cell(graphite matches with lithium anode)and a full cell(graphite matches with NCM,short for LiNixCoyMn1-x-yO2)at different temperatures.We conclude that high temperature causes severe side reactions and low temperature will result in low ionic conductive SEI layer,the interface formed at room temperature owns the best ionic conductivity and stability.展开更多
Lithium-sulfur(Li-S) battery is one of the best candidates for the next-generation energy storage system due to its high theoretical capacity(1675 mA h-1),low cost and environment friendliness.However,lithium(Li) dend...Lithium-sulfur(Li-S) battery is one of the best candidates for the next-generation energy storage system due to its high theoretical capacity(1675 mA h-1),low cost and environment friendliness.However,lithium(Li) dendrites formation and polysulfide shuttle effect are two major challenges that limit the commercialization of Li-S batteries.Here we design a facile bifunctional interlayer of gelatin-based fibers(GFs),aiming to protect the Li anode surface from the dendrites growth and also hinder the polysulfide shuttle effect.We reveal that the 3D structural network of GFs layer with abundant polar sites helps to homogenize Li-ion flux,leading to uniform Li-ion deposition.Meanwhile,the polar moieties also immobilize the lithium polysulfides and protect the Li metal from the side-reaction.As a result,the anodeprotected batteries have shown significantly enhanced performance.A high coulombic efficiency of 96% after 160 cycles has been achieved in the Li-Cu half cells.The Li-Li symmetric cells exhibit a prolonged lifespan for 800 h with voltage hysteresis(10 mV).With the as-prepared GFs layer,the Li-S battery shows approximately 14% higher capacity retention than the pristine battery at 0.5 C after 100 cycles.Our work presents that this gelatin-based bi-functional interlayer provides a viable strategy for the manufacturing of advanced Li-S batteries.展开更多
基金supported by the National Key R&D Program of China(Grant 2022YFB2402200)National Natural Science Foundation of China(Grant 92372206,52271140,52171194)+2 种基金Jilin Province Science and Technology Development Plan Funding Project(Grant YDZJ202301-ZYTS545)National Natural Science Foundation of China Excellent Young Scientists(Overseas)Youth Innovation Promotion Association CAS(Grant 2020230)。
文摘Aqueous zinc batteries offer significant potential for large-scale energy storage,wearable devices,and medium-to low-speed transportation due to their safety,affordability,and environmental friendliness.However,the uneven zinc deposition at the anode side caused by localized reaction activity from the passivation layer presents challenges that significantly impact the battery's stability and lifespan.In this study,we have proposed an expandable and maneuverable gel sustained-release(GSR)treatment to polish the Zn metal,which in situ converts its native passivation layer into a composite interphase layer with nanocrystal zinc phosphate and flexible polyvinyl alcohol.Such a thin and uniform interface contributes to fast and homogeneous Zn ion transport and improved anti-corrosion ability,enabling uniform zinc deposition without dendrite growth and thereby improving the battery performance with high-rate ability and long cycle life.This GSR treatment method,characterized by its simplicity,low cost,and universality,facilitates the widespread application of aqueous zinc batteries.
基金supported by the National Natural Science Foundation of China (52404316, 52474325)the S&T program of Hebei Province(225A4404D)+3 种基金the Natural Science Foundation of Hainan Province (524RC475)the Collaborative Innovation Center of Marine Science and Technology of Hainan University (XTCX2022HYC14)the Xingtai City Natural Science Foundation (2023ZZ027)The Pico Electron Microscopy Center of Hainan University partially supported this study
文摘Gel polymer electrolytes(GPEs)with high flame‐retardant concentration can remarkably reduce the thermal runaway risk of lithium metal batteries(LMBs).However,higher flame‐retardant content in GPEs always leads to increased leakage of active component and severe lithium corrosion,which greatly hinders the service life of LMBs.Herein,GPEs with high‐loading triphenyl phosphate(TPP)are originally fabricated by coaxial electrospinning and stabilized by dual confinement effects,including chemisorption of polyvinylidene fluoride‐hexafluoropropylene(PVDF‐HFP),and physical encapsulation of polyacrylonitrile(PAN)/PVDF‐HFP.These effects arise from the strong polar interactions between the−CF3 group in PVDF‐HFP and P=O group in TPP,as well as the superior anti‐swelling property of PAN.To mitigate TPP‐induced corrosion during cycling,the optimized Li anode is armored with LiF‐rich solid electrolyte interphase(SEI)layer through immersing it in fluoroethylene carbonate‐containing electrolyte.As expected,the corresponding Li||Li symmetric cells deliver long‐term stable cycling behavior over 2400 h at 0.5 mA cm−2,and the LiFePO4||Li batteries hold a high‐capacity retention ratio of 81.7%after 6000 cycles at 10 C with excellent flame retardancy.These findings offer new insight into designing the SEI layer for lithium metal in flame‐retardant electrolytes,thus promoting the development and application of high‐security LMBs.
基金supported by the National Key R&D Program of China(2021YFB3800300).
文摘High-nickel cathode,LiNi0.8Co0.1Mn0.1O_(2)(NCM811),and sulfide-solid electrolyte are a promising combination for all-solid-state lithium batteries(ASSLBs).However,this combination faces the issue of interfacial instability between the cathode and electrolyte.Given the surface alkalinity of NCM811,we propose a strategy to construct a solid-polymer-electrolyte(SPE)interphase on NCM811 surface by leveraging the surface alkaline residues to nucleophilically initiate the in-situ ring-opening polymerization of cyclic organic molecules.As a proof-of-concept,this study demonstrates that the ring-opening copolymerization of 1,3-dioxolane and maleic anhydride produces a homogeneous,compact,and conformal SPE layer on NCM811 surface to prevent the cathode from contact and reaction with Li6PS5Cl solid-state electrolyte.Consequently,the SPE-modified-NCM811 in ASSLBs exhibits high capacities of 193.5 mA h g^(-1) at 0.2 C,160.9 mA h g^(-1) at 2.0 C and 112.3 mA h g^(-1) at 10 C,and particularly,excellent long-term cycling stabilities over 11000 cycles with a 71.95%capacity retention at 10 C at 25℃,as well as a remained capacity of 117.9 mA h g^(-1) after 8000 cycles at 30 C at 60℃,showing a great application prospect.This study provides a new route for creating electrochemically and structurally stable solid-solid interfaces for ASSLBs.
基金the financial supports from the KeyArea Research and Development Program of Guangdong Province (2020B090919001)the National Natural Science Foundation of China (22078144)the Guangdong Natural Science Foundation for Basic and Applied Basic Research (2021A1515010138 and 2023A1515010686)。
文摘Li metal batteries using high-voltage layered oxides cathodes are of particular interest due to their high energy density.However,they suffer from short lifespan and extreme safety concerns,which are attributed to the degradation of layered oxides and the decomposition of electrolyte at high voltage,as well as the high reactivity of metallic Li.The key is the development of stable electrolytes against both highvoltage cathodes and Li with the formation of robust interphase films on the surfaces.Herein,we report a highly fluorinated ether,1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy)methoxy]ethane(TTME),as a cosolvent,which not only functions as a diluent forming a localized high concentration electrolyte(LHCE),but also participates in the construction of the inner solvation structure.The TTME-based electrolyte is stable itself at high voltage and induces the formation of a unique double-layer solid electrolyte interphase(SEI)film,which is embodied as one layer rich in crystalline structural components for enhanced mechanical strength and another amorphous layer with a higher concentration of organic components for enhanced flexibility.The Li||Cu cells display a noticeably high Coulombic efficiency of 99.28%after 300 cycles and Li symmetric cells maintain stable cycling more than 3200 h at 0.5 mA/cm^(2) and 1.0m Ah/cm^(2).In addition,lithium metal cells using LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) and Li CoO_(2) cathodes(both loadings~3.0 m Ah/cm^(2))realize capacity retentions of>85%over 240 cycles with a charge cut-off voltage of 4.4 V and 90%for 170 cycles with a charge cut-off voltage of 4.5 V,respectively.This study offers a bifunctional ether-based electrolyte solvent beneficial for high-voltage Li metal batteries.
基金financially supported by the Natural Sciences and Engineering Research Council of Canada (NSERC),through the Discovery Grant Program (RGPIN-2018-06725)the Discovery Accelerator Supplement Grant program (RGPAS-2018-522651)+2 种基金the New Frontiers in Research Fund-Exploration program (NFRFE-2019-00488)supported by funding from the Canada First Research Excellence Fund as part of the University of Alberta’s Future Energy Systems research initiative (FES-T06-Q03)supported by the Chinese Scholarship Council (CSC)(Grant No. 202006450027).
文摘The practical application of aqueous zinc-ion batteries for large-grid scale systems is still hindered by uncontrolled zinc dendrite and side reactions.Regulating the elec-trical double layer via the electrode/electrolyte interface layer is an effective strategy to improve the stability of Zn anodes.Herein,we report an ultrathin zincophilic ZnS layer as a model regu-lator.At a given cycling current,the cell with Zn@ZnS electrode displays a lower potential drop over the Helmholtz layer(stern layer)and a suppressed diffuse layer,indicating the regulated charge distribution and decreased electric double layer repulsion force.Boosted zinc adsorption sites are also expected as proved by the enhanced electric double-layer capacitance.Consequently,the symmetric cell with the ZnS protection layer can stably cycle for around 3,000 h at 1 mA cm^(-2) with a lower overpotential of 25 mV.When coupled with an I2/AC cathode,the cell demonstrates a high rate performance of 160 mAh g^(-1) at 0.1 A g^(-1) and long cycling stability of over 10,000 cycles at 10 A g^(-1).The Zn||MnO_(2) also sustains both high capacity and long cycling stability of 130 mAh g^(-1) after 1,200 cycles at 0.5 A g^(-1).
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(NRF-2019R1A2C2088174)。
文摘The lithium-ion batteries are recognized as the most promising energy storage system,but it still does not meet the power requirements of electric vehicle batteries owing to low volumetric energy density with the traditional graphite electrode system.In this study,we report the development of a novel electrode system fabricated by implantation of a solid electrolyte interphase(SEI)layer on the graphite surface.The SEI-implanted graphite electrode is made using a lithium bis(trifluoromethanesulfonyl)imide(LiTFSI)-based electrolyte and cycled with a lithium tetrafluoroborate LiBF4-based electrolyte.This new electrode system shows significantly enhanced electrochemical properties owing to the rapid and efficient diffusion of Li ions through the SEI layer between the electrolyte and electrode.This graphite electrode with its pre-formed SEI layer achieves a reversible capacity of 357 mAh g^-1 at 0.5 C after 50 cycles,which is significantly higher than that of commercial lithium-ion battery systems constructed with LiPF6(312mAh g^-1).The resulting unique electrode system could present a new avenue in SEI research for highperformance lithium-ion batteries.
基金Foundation items: the National Natural Science Foundation of China (10272009) the Science Foundation of Aviation of China (99G51022)
文摘The interaction of a screw dislocation in the interphase layer with the circular inhomogeneity and matrix was dealt with . An efficient method for multiply connected regions was developed by combining the sectionally subholomorphic function theory, Schwatz symmetric principle and Cauchy integral technique. The Hilbert problem of the complex potentials for three material regions was reduced to a functional equation in the complex potential of the interphase layer, resulting in an explicit series solution . By using the present solution the interaction energy and force acting dislocation were evaluated and discussed.
基金National Natural Science Foundation of China (Grant Nos. 22178125 and 21875071)。
文摘All-solid-state lithium-sulfur batteries(ASSLSBs) have become one of the most potential candidates for the next-generation high-energy systems due to their intrinsic safety and high theoretical energy density.However, PEO-based ASSLSBs face the dilemma of insufficient Coulombic efficiency and long-term stability caused by the coupling problems of dendrite growth of anode and polysulfide shuttle of cathode. In this work, 1,3,5-trioxane(TOX) is used as a functional additive to design a PEO-based composite solidstate electrolyte(denoted as TOX-CSE), which realizes the stable long-term cycle of an ASSLSB. The results show that TOX can in-situ decompose on the anode to form a composite solid electrolyte interphase(SEI) layer with rich-organic component. It yields a high average modulus of 5.0 GPa, greatly improving the mechanical stability of the SEI layer and thus inhibiting the growth of dendrites. Also,the robust SEI layer can act as a barrier to block the side reaction between polysulfides and lithium metal.As a result, a Li-Li symmetric cell assembled with a TOX-CSE exhibits prolonged cycling stability over 2000 h at 0.2 m A cm^(-2). The ASSLSB also shows a stable cycling performance of 500 cycles at 0.5 C.This work reveals the structure–activity relationship between the mechanical property of interface layer and the battery's cycling stability.
基金supported by the National Natural Science Foundation of China(Grant Number 22350410379)Zhejiang Provincial Natural Science Foundation of China(LZ23B030003)+1 种基金the Fundamental Research Funds for the Central Universities(226-202400075)Ten Thousand Talent Program of Zhejiang Province.
文摘Separator modification is an effective approach to suppress dendrite growth to realize high-energy sodium metal batteries(SMBs)in practical applications,however,its success is mainly subject to surface modification.Herein,a separator with multifunctional layers composed of N-doped mesoporous hollow carbon spheres(HCS)as the inner layer and sodium fluoride(NaF)as the outer layer on commercial polypropylene separator(PP)is proposed(PP@HCS-NaF)to achieve stable cycling in SMB.At the molecular level,the inner HCS layer with a high content of pyrrolic-N induces the uniform Na^(+)flux as a potential Na^(+)redistributor for homogenous deposition,whereas its hollow mesoporous structure offers nanoporous buffers and ion channels to regulate Na^(+)ion distribution and uniform deposition.The outer layer(NaF)constructs the NaF-enriched robust solid electrolyte interphase layer,significantly lowering the Na^(+)ions diffusion barrier.Benefiting from these merits,higher electrochemical performances are achieved with multifunctional double-layered PP@HCS-NaF separators compared with single-layered separators(i.e.PP@HCS or PP@NaF)in SMBs.The Na‖Cu half-cell with PP@HCS-NaF offers stable cycling(280 cycles)with a high CE(99.6%),and Na‖Na symmetric cells demonstrate extended lifespans for over 6000 h at 1 mA cm^(-2)with a progressively stable overpotential of 9 mV.Remarkably,in Na‖NVP full-cells,the PP@HCS-NaF separator grants a stable capacity of~81 mA h g^(-1)after 3500 cycles at 1 C and an impressive rate capability performance(~70 mA h g^(-1)at 15 C).
基金financial support from National Natural Science Foundation of China(22271178,U2032131,21972103)International Cooperation Key Project of Science and Technology Department of Shaanxi,China(2022KWZ-06)+3 种基金the Youth Talent Promotion Project of Science and Technology Association of Universities of Shaanxi Province(20210602)Research Project of Xi’an Science and Technology Bureau(2022GXFW0011)Science and Technology New Star in Shaanxi Province(2023KJXX-045)Shaanxi Provincial Department of Education Service Local Special Project,Industrialization Cultivation Project(23JC007)。
文摘Lithium(Li)deposition and nucleation at solid electrolyte interphase(SEI)is the main origin for the capacity decay in Li metal batteries(LMBs).SEI conversion with enhanced electrochemical and mechanical properties is an effective approach to achieve uniform nucleation of Li^(+)and stabilize the lithium metal anode.However,complex interfacial reaction mechanisms and interface compatibility issues hinder the development of SEI conversion strategies for stabilizing lithium metal anodes.Herein,we presented the release of I_(3)^(-)in–NH_(2)-modified metal–organic frameworks for a Li metal surface SEI phase conversion strategy.The–NH_(2)group in MOF pores induced the formation of I_(3)^(-)from I_(2),which was further spontaneously reacted with inactive Li_(2)O transforming into high-performance LiI and LiIO_(3)interphase.Furthermore,theoretical calculation provided deeply insight into the unique reconstructed interfacial formation and electrochemical mechanism of rich LiI and LiIO_(3)SEI.As a result,the Li^(+)deposition and nucleation were improved,facilitating the transport kinetics of Li^(+)and inhibiting the growth of lithium dendrites.The assembled solid-state Li||LiFePO_(4)full cells exhibited superior long-term stability of 800 cycles and high Coulombic efficiency(>99%),Li||LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)pouch cell also displayed superior practical performance over 200 cycles at 2 C,high loading of 5 mg cm^(-2)and safety performance.This innovative SEI design strategy promotes the development of high-performance solid-state Li metal batteries.
基金supported by the Australian Research Council (FT180100705, DP230101579, DE240100868)CSIRO “International Hydrogen Research Collaboration ProgramRESEARCH FELLOWSHIPS”+2 种基金the National Natural Science Foundation of China (22209103)support from the “Joint International Laboratory on Environmental and Energy Frontier Materials”the “Innovation Research Team of High-Level Local Universities in Shanghai”
文摘Rechargeable zinc-ion batteries have emerged as one of the most promising candidates for large-scale energy storage applications due to their high safety and low cost.However,the use of Zn metal in batteries suffers from many severe issues,including dendrite growth and parasitic reactions,which often lead to short cycle lives.Herein,we propose the construction of functional organic interfacial layers(OIL)on the Zn metal anodes to address these challenges.Through a well-designed organic-assist pre-construction process,a densely packed artificial layer featuring the immobilized zwitterionic molecular brush can be constructed,which can not only efficiently facilitate the smooth Zn plating and stripping,but also introduce a stable environment for battery reactions.Through density functional theory calculations and experimental characterizations,we verify that the immobilized organic propane sulfonate on Zn anodes can significantly lower the energy barrier and increase the kinetics of Zn^(2+)transport.Thus,the Zn metal anode with the functional OIL can significantly improve the cycle life of the symmetric cell to over 3500 h stable operation.When paired with the H_(2)V_(3)O_(8)cathode,the aqueous Zn-ion full cells can be continuously cycled over 7000 cycles,marking an important milestone for Zn anode development for potential industrial applications.
基金supported by the Natural Science Foundation of China(No.22109079)the Natural Science Foundation of China(No.21973008)+2 种基金the Natural Science Foundation of China(No.22179010)the National Key R&D Program of China(No.2021YFB2400200)Taishan Scholars of Shandong Province(No.tsqnz20231212)。
文摘Polyethylene oxide(PEO)-based solid polymer electrolytes are considered as promising material for solidstate sodium metallic batteries(SSMBs).However,their poor interfacial stability with high-voltage cathode limits their application in high-energy–density solid-state batteries.Herein,a uniform,sulfur-containing inorganic–organic composite cathode–electrolyte interphase layer was in situ formed by the addition of sodium polyvinyl sulfonate(NaPVS).The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(3)(NVP)|PEOsodium hexauorophosphate(NaPF6)|Na battery shows a higher initial capacity of 111.2 mAh.g^(-1)and an ultra-high capacity retention of 90.5%after 300 cycles.The 5 wt%NaPVS-Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF)|PEO-NaPF_(6)|Na battery with the high cutoff voltage of 4.2 V showed a specific discharge capacity of 88.9 mAh.g^(-1)at 0.5C for 100 cycles with a capacity retention of 79%,which is much better than that of the pristine-NVPF(PR-NVPF)|PEO-NaPF_(6)|Na battery(33.2%).The addition of NaPVS not only enhances the diffusion kinetics at the interface but also improves the rate performance and stability of the battery,thus bolstering its viability for high-energy applications.In situ phase tracking further elucidates that NaPVS effectively mitigates self-discharge induced by the oxidative decomposition of PEO at high temperature.This work proposes a general strategy to maintain the structural stability of the cathode–electrolyte interface in PEO-based high-performance SSMBs.
基金supported by the National Natural Science Foundation of China(Nos.51931006,U22A20118).
文摘Spinel LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)cathode draws significant attention in the field of energy storage due to its unique voltage plateau.To further enhance the long-term electrochemical stability of LNMO,the LNMO cathode covered with an ultrathin ZrO_(2)layer was prepared through atomic layer deposition(ALD).It is found that the LNMO cathode deposited with 20 layers of ZrO_(2)(LNMOZ20)exhibits the best electrochemical performance,achieving a high discharge capacity of 117.1 mA·h/g,with a capacity retention of 87.4%after 600 cycles at a current density of 1C.Furthermore,even at higher current densities of 5C and 10C,the LNMOZ20 electrode still demonstrates excellent stability with discharge capacities reaching 111.7 and 103.6 mA·h/g,and capacity retentions maintaining at 81.0%and 101.4%after 2000 cycles,respectively.This study highlights that the incorporation of an ultrathin ZrO_(2)layer by ALD is an effective strategy for enhancing the long-term cycling stability of LNMO cathodes.
基金supported by the National Basic Research Program of China (Grant no. 2015CB251100)Beijing Natural Science Foundation (No. L182023)
文摘Lithium metal is supposed to be critical material for constructing next-generation batteries due to extremely high capacity and ultralow redox potential. However, the perplexing issue of lithium dendrite growth impedes the commercial application. The initial nucleation and low Li ions diffusion rate in the electrolyte/electrode interface dominate the deposition behavior. Therefore, a uniform and flexible interface is urgently needed. Here, a facile method is proposed to prepare a thin and porous LiF-rich layer (TPL) by the in-situ reaction of small amount of ammonium hydrogen difluoride (NH4HF2) and Li metal. The deposition morphology on Li metal anode with LiF layer is significantly flat and homogeneous owning to low lateral diffusion barrier on LiF crystals and the porous structure of TPL film. Additionally, the symmetrical cells made with such TPL Li anodes show significantly stable cycling over 100 cycles at high current density of 6 mA/cm^2. The TPL Li|LiFePO4 full cells keep over 99% capacity retention after 100 cycles at 2.0 C. This approach serves as a facile and controllable way of adjusting the protective layer on Li metal.
基金supported by the National Key Research and Development Program(2016YFA0202500)National Natural Science Foundation of China(21776019,21808124,51972121)+1 种基金Tip-top Scientific and Technical Innovative Youth Talents of Guangdong Special Support Program(2017TQ04C419)Beijing Natural Science Foundation(L182021)。
文摘Lithium metal batteries are strongly considered as one of the most promising candidates for nextgeneration high-performance battery systems.However,the uncontrollable growth of lithium dendrites and the highly reactive lithium metal result in the severe safety risks and the short lifespan for highenergy-density rechargeable batteries.Here,we demonstrate a hydrophobic and ionically conductive ethylene-vinyl acetate(EVA)copolymer layer can not only endow lithium metal anodes with an air-stable and anti-water surface,but also efficiently suppress the lithium-dendrites growth during the electrochemical cycling process.Therefore,the introduction of the EVA copolymer as a bifunctional protection layer simultaneously improves the anti-water/air performance and electrochemical cycling stability of lithium metal anode.
基金supported by National Key Research and Development Program(2016YFA0202500)the National Natural Science Foundation of China(21776019)Beijing Natural Science Foundation(L182021)。
文摘Lithium-ion battery has greatly changed our lifestyle and the solid electrolyte interphase(SEI)covered on the graphite anode determines the service life of a battery.The formation method and the formation temperature at initial cycle of a battery determine the feature of the SEI.Herein,we investigate the gap of formation behavior in both a half cell(graphite matches with lithium anode)and a full cell(graphite matches with NCM,short for LiNixCoyMn1-x-yO2)at different temperatures.We conclude that high temperature causes severe side reactions and low temperature will result in low ionic conductive SEI layer,the interface formed at room temperature owns the best ionic conductivity and stability.
基金supported by the National Natural Science Foundation of China (No. 51861165101)。
文摘Lithium-sulfur(Li-S) battery is one of the best candidates for the next-generation energy storage system due to its high theoretical capacity(1675 mA h-1),low cost and environment friendliness.However,lithium(Li) dendrites formation and polysulfide shuttle effect are two major challenges that limit the commercialization of Li-S batteries.Here we design a facile bifunctional interlayer of gelatin-based fibers(GFs),aiming to protect the Li anode surface from the dendrites growth and also hinder the polysulfide shuttle effect.We reveal that the 3D structural network of GFs layer with abundant polar sites helps to homogenize Li-ion flux,leading to uniform Li-ion deposition.Meanwhile,the polar moieties also immobilize the lithium polysulfides and protect the Li metal from the side-reaction.As a result,the anodeprotected batteries have shown significantly enhanced performance.A high coulombic efficiency of 96% after 160 cycles has been achieved in the Li-Cu half cells.The Li-Li symmetric cells exhibit a prolonged lifespan for 800 h with voltage hysteresis(10 mV).With the as-prepared GFs layer,the Li-S battery shows approximately 14% higher capacity retention than the pristine battery at 0.5 C after 100 cycles.Our work presents that this gelatin-based bi-functional interlayer provides a viable strategy for the manufacturing of advanced Li-S batteries.
