The development of an analytical method for determining the properties of quantum dots(QDs)is crucial for improving the optical performance of QD-based displays.Therefore,synchrotron-based X-ray photoelectron spectros...The development of an analytical method for determining the properties of quantum dots(QDs)is crucial for improving the optical performance of QD-based displays.Therefore,synchrotron-based X-ray photoelectron spectroscopy(XPS)is designed here to accurately characterize the chemical and structural differences between different QDs.This method enables the determination of the reason for the minimal differences between the optical properties of different QDs depending on the synthesis process,which is difficult to determine using conventional methods alone.Combined with model simulations,the XPS spectra obtained at different photon energies reveal the internal structures and chemical-state distributions of the QDs.In particular,the QD synthesized under optimal conditions demonstrates a relatively lower degree of oxidation of the core and more uniformly stacked ZnSe/ZnS shell layers.The internal structures and chemical-state distributions of QDs are closely related to their optical properties.Finally,the synchrotron-based XPS proposed here can be applied to compare nearly equivalent QDs with slightly different optical properties.展开更多
Bedload sediment transport was estimated by the SEDTRANS96 model based on three-day hydrodynamics data obtained off the Dongfang coast in the Beibu Gulf during Typhoon Ketsana in September 2009. Bed- forms on the sea ...Bedload sediment transport was estimated by the SEDTRANS96 model based on three-day hydrodynamics data obtained off the Dongfang coast in the Beibu Gulf during Typhoon Ketsana in September 2009. Bed- forms on the sea floor off the Dongfang coast and internal structures of a typical dune were interpreted to evaluate storm influences on individual dunes and the dune field. Results indicated that flow forcings and related bedload transport were both strengthened significantly due to Typhoon Ketsana. The measurements and modeling results, which mainly included three different stages, presented noticeable phasic variation. The three stages were dominated by tidal current （Period I）, tidal current combined with wind-induced waves （Period II）, and swells combined with tidal current and seaward flows （Period III）. This phasic varia- tion could be a common trait of hydrodynamics due to typhoons moving westwardly to the south of Hainan Island and Beibu Gulf in South China Sea. Results indicated that the maximum bedioad transport rate for every burst in Period III was almost 100 times larger than that in Period I and was ten times larger than that in Period II. However, the short-term increase in bedload transport induced by storms like Ketsana did not change the long-term evolution of dune morphology. Evidence was given by the internal structures of a typical dune, which revealed renewed modification under subsequent moderate conditions after storm ero- sion. Instead, storms may influence at different scales and regional allocation of sand dunes in some large areas because changes of the sea floor in large scales can hardly be recovered. More surveys during and after storm passage are also needed to document the level of positive contribution to forward migration.展开更多
The internal structures of metallic products are important in realizing functional applications.Considering the manufacturing of inner structures,laser-based powder bed fusion(L-PBF)is an attractive approach because i...The internal structures of metallic products are important in realizing functional applications.Considering the manufacturing of inner structures,laser-based powder bed fusion(L-PBF)is an attractive approach because its layering principle enables the fabrication of parts with customized interior structures.However,the inferior surface quality of L-PBF components hinders its productization progress seriously.In this article,process,basic forms,and applications relevant to L-PBF internal structures are reviewed comprehensively.The causes of poor surface quality and differences in the microstructure and property of the surface features of L-PBF inner structures are presented to provide a perspective of their surface characteristics.Various polishing technologies for L-PBF components with inner structures are presented,whereas their strengths and weaknesses are summarized along with a discussion on the challenges and prospects for improving the interior surface quality of L-PBF parts.展开更多
The axial flux permanent magnet(AFPM)generator with double-sided internal stator structure is highly suitable for vertical axis wind turbines due to its high power density.The performance of the AFPM generator with do...The axial flux permanent magnet(AFPM)generator with double-sided internal stator structure is highly suitable for vertical axis wind turbines due to its high power density.The performance of the AFPM generator with double-sided internal stator structure can be improved by the reasonable design of electromagnetic parameters.To further improve the overall performance of the AFPM generator with double-sided internal stator structure,multivariable(coil widthω_(c),permanent magnet thickness h,pole arc coefficient α_(p) and working air gap l_(g))and multi-objective(generator efficiencyη,total harmonic distortion of the voltage THD and induced electromotive force amplitude EMF)functional relationships are innovatively established.Orthogonal analysis,mean analysis and variance analysis are performed on the influence parameters by combining the Taguchi method and response surface methodology to study the influence degrees of each influence parameter on the optimization objectives to determine the most appropriate electromagnetic parameters.The optimization results are verified by 3D finite element analysis.The optimized APFM generator with double-sided internal stator structure exhibits superior economy,stronger magnetic density,higher efficiency and improved power quality.展开更多
In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement with...In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.展开更多
Temporal variations in multimodal structures of diurnal( D_1) and semidiurnal( D_2) internal tides were investigated on the continental slope of the Dongsha Plateau, based on 2-month moored acoustic Doppler current pr...Temporal variations in multimodal structures of diurnal( D_1) and semidiurnal( D_2) internal tides were investigated on the continental slope of the Dongsha Plateau, based on 2-month moored acoustic Doppler current profiler observations. Harmonic analysis indicated that the D_1 components( K_1 and O_1) dominated the internal tide field. The vertical structure of the K_1 constituent presented a first-mode structure while the M_2 constituent seemed to exhibit a high-mode structure. Amplitude spectra analysis of the current data revealed differences in baroclinic current amplitudes between different water depths. Temporal variations in modal structures ware analyzed, based on the D_1 and D_2 baroclinic tides extracted from the baroclinic velocity field with band-pass filters. Analysis showed that the magnitude of the D_1 internal tide current was much larger than the D_2 current, and temporal variations in the modal structure of the D_1 internal tide occurred on an approximately fortnightly cycle. The EOF analyses revealed temporal transformation of multimodal structures for D_1 and D_2 internal tides. The enhancement of the D_1 internal tide was mainly due to the superposition of K_1 and O_1, according to the temporal variation of coherent kinetic energy.展开更多
Batch-processing wet-etch reactors are the key equipment widely used in chip fabrication,and their performance is largely affected by the internal structure.This work develops a three-dimensional computational fluid d...Batch-processing wet-etch reactors are the key equipment widely used in chip fabrication,and their performance is largely affected by the internal structure.This work develops a three-dimensional computational fluid dynamics(CFD)model considering heat generation of wet-etching reactions to investigate the fluid flow and heat transfer in the wet-etch reactor.The backflow is observed below and above the wafer region,as the flow resistance in this region is high.The temperature on the upper part of a wafer is higher due to the accumulation of reaction heat,and the average temperature of the side wafer is highest as its convective heat transfer is weakest.Narrowing the gap between wafer and reactor wall can force the etchant to flow in the wafer region and then facilitate the convective heat transfer,leading to better within-wafer and wafer-to-wafer etch uniformities.An inlet angle of 60°balances fluid by-pass and mechanical energy loss,and it yields the best temperature and etch uniformities.The batch with 25wafers has much wider flow channels and much lower flow resistance compared with that with 50wafers,and thus it shows better temperature and etch uniformities.These results and the CFD model should serve to guide the optimal design of batch-processing wet-etch reactors.展开更多
The tidal current is generally predominant in China's offshore areas. The vertical structure of the observedtidal current is quite complicated with the presence of seasonal thermocline. The observed tidal current ...The tidal current is generally predominant in China's offshore areas. The vertical structure of the observedtidal current is quite complicated with the presence of seasonal thermocline. The observed tidal current may be divided into two parts, an averaged barotropic tide current and a variation tide current. A method for studying the vertical structure of tidal current is developed from the constitution and distribution of energy, and the vertical structure of the observed tide current in the North Huanghai Sea is studied on the basis of the method. The result shows that the reason why the energy of the tidal current is concentrated on the neighbourhood of the thermocline mainly lies in the internal tides i under certain conditions, the fact that the direction of the internal tide current above the thermocline is opposite to the one below the thermocline will be able to cause the rotary directions of the observed tidal current above and below the thermocline to be in opposite. The interaction between the averaged barotropic and the variation tide current plays an important role in forming the vertical structure of the tidal current, and it is mainly the interaction that results in the inho-mogeneous distribution of the tide current energy in the entire water column ; the ratio between the total energies of the internal tide current above the thermocline and the variation tide current in the entire water column is greater than the ratio between the total energies of that below the thermocline and the variation's. In a strong internal tide area such as the neighbourhood of Station L4, at diurnal tide frequency, the above-mentioned corresponding ratios are about 38. 82% and 29. 88%, respectively, and the energy of the internal tide current is about 68. 70%of the energy of the variation tide current; at semidiurnal tide frequency, the above-mentioned corresponding ratios are about 26. 61 % and 19. 73% , respectively, and the total internal tide current energy is about 46. 36% of the total variation tide current energy.展开更多
In this paper, based on the idea of finite element method, the initial parametric method in bending, problem of a beam is extended to analyse the bar-system structure by employing Dirac function and llcavisidc step fu...In this paper, based on the idea of finite element method, the initial parametric method in bending, problem of a beam is extended to analyse the bar-system structure by employing Dirac function and llcavisidc step function.Then a new method for analysing the internal forces and deformations of bar-system structure in space is suggested by improving the mixed method in statically indeterminate structure.The inferred process and obtained answer will be more succinct and accurate when the problem of internal forces and deformations of bar-system structure is analysed by using the new method provided in this paper.展开更多
We present the specific ab-initio calculations that detail the variations of perovskite BaZrO3 caused by in-plane strain. Specifically, the internal relaxation, which was not captured in the widely used biaxial strain...We present the specific ab-initio calculations that detail the variations of perovskite BaZrO3 caused by in-plane strain. Specifically, the internal relaxation, which was not captured in the widely used biaxial strain model, was included in a complementary manner to lattice relaxation. Density functional theory as well as a hybrid functional method based on a plane wave basis set was employed to calculate the lattice structure, elastic constants, electronic properties and optical properties of perovskite BaZrO3. The lattice parameter c exhibited a clear linear dependence on the imposed in-plane strain, but the Poisson＇s ratio caused by internal relaxation was smaller than the elastic deformation, indicating an ＂inelastic＂ or ＂plastic＂ relaxation manner caused by the introduction of internal relaxation. As a result, the related electronic and optical properties of perovskite BaZrO3 were also strongly affected by the in-plane strain, which revealed an effective way to adjust the properties of perovskite BaZrO3 via internal relaxation.展开更多
The internal structures of cells as the basic units of life are a major wonder of the microscopic world.Cellular images provide an intriguing window to help explore and understand the composition and function of these...The internal structures of cells as the basic units of life are a major wonder of the microscopic world.Cellular images provide an intriguing window to help explore and understand the composition and function of these structures.Scientific imagery combined with artistic expression can further expand the potential of imaging in educational dissemination and interdisciplinary applications.展开更多
Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which ...Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which reveal the internal surfaces and structures of orifices. To analyze the machining precision and characteristics of orifice processing methods, an ap- proach is presented based on the parameters of the internal structures of nozzle orifices, including the nozzle diameter, the orifice inner surface waviness, the eccentricity distance and the angle between orifices. Using this approach, two kinds of nozzle orifice processing methods, computerized numerical control drilling and electric discharge machining, have been studied and compared. The results show that this approach enables a simple, direct, and comprehensive contrastive analysis of nozzle orifice processing methods. When processing a single orifice, the electric discharge machining method has obvious advantages. However, when there are multiple orifices, the error levels of the two methods are similar in relation to the symmetry of distribution of the orifices.展开更多
Following developments in artificial intelligence and big data technology,the level of intelligence in intelligent vessels has been improved.Intelligent vessels are being developed into unmanned surface vehicles(USVs)...Following developments in artificial intelligence and big data technology,the level of intelligence in intelligent vessels has been improved.Intelligent vessels are being developed into unmanned surface vehicles(USVs),which have widely interested scholars in the shipping industry due to their safety,high efficiency,and energy-saving qualities.Considering the current development of USVs,the types of USVs and applications domestically and internationally are being investigated.USVs emerged with technological developments and their characteristics show some differences from traditional vessels,which brings some problems and advantages for their application.Certain maritime regulations are not applicable to USVs and must be changed.The key technologies in the current development of USVs are being investigated.While the level of intelligence is improving,the protection of cargo cannot be neglected.An innovative approach to the internal structure of USVs is proposed,where the inner hull can automatically recover its original state in case of outer hull tilting.Finally,we summarize the development status of USVs,which are an inevitable direction of development in the marine field.展开更多
There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote...There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote successful fabrication of small-diameter artificial blood vessels.From a physical perspective,the internal oriented structures of natural blood vessels plays an important role in guiding the directional growth of cells,improving the blood flow environment,and promoting the regeneration of vascular tissue.In this review,the effects of the oriented structures on cells,including endothelial cells(ECs),smooth muscle cells(SMCs)and stem cells,as well as the effect of the oriented structures on hemodynamics and vascular tissue remodeling and regeneration are introduced.Various forms of oriented structures(fibers,grooves,channels,etc.)and their construction methods are also reviewed.Conclusions and future perspectives are given.It is expected to give some references to relevant researches.展开更多
The tidal Love numbers of the Moon are a set of nondimensional parameters that describe the deformation responses of the Moon to the tidal forces of external celestial bodies.They play an important role in the theoret...The tidal Love numbers of the Moon are a set of nondimensional parameters that describe the deformation responses of the Moon to the tidal forces of external celestial bodies.They play an important role in the theoretical calculation of the Moon’s tidal deformation and the inversion of its internal structure.In this study,we introduce the basic theory for the theoretical calculation of the tidal Love numbers and propose a new method of solving the tidal Love numbers:the spectral element method.Moreover,we explain the mathematical theory and advantages of this method.On the basis of this new method,using 10 published lunar internal structure reference models,the lunar surface and lunar internal tidal Love numbers were calculated,and the influence of different lunar models on the calculated Love numbers was analyzed.Results of the calculation showed that the difference in the second-degree lunar surface Love numbers among different lunar models was within 8.5%,the influence on the maximum vertical displacement on the lunar surface could reach±8.5 mm,and the influence on the maximum gravity change could reach±6μGal.Regarding the influence on the Love numbers inside the Moon,different lunar models had a greater impact on the Love numbers h_(2) and l_(2) than on k_(2) in the lower lunar mantle and core.展开更多
Jupiter’s magnetic field is thought to be generated in its deep metallic hydrogen region through dynamo action,yet the detailed dynamic process remains poorly understood.Numerical simulations have produced Jupiter-li...Jupiter’s magnetic field is thought to be generated in its deep metallic hydrogen region through dynamo action,yet the detailed dynamic process remains poorly understood.Numerical simulations have produced Jupiter-like magnetic fields,albeit using different control parameters and reference state models.In this study,we investigate the influence of different reference state models,based on ab initio calculations and based on the polytropic equation of state.In doing so,we perform five anelastic convection dynamo simulations that can be divided into two groups.In each group,different reference states are used while other control parameters and conditions are set to be identical.We find the reference state model can be very influential for the simulations in which buoyancy force is dominant over the Lorentz force.In this regime,different dynamical outcomes can be attributed to the effective buoyancy force resulting from different reference states.For simulations in which the Lorentz force is dominant over the buoyancy force,however,dynamo actions tend to be insensitive to different reference state models.If Jupiter’s dynamo is in a strong field regime,i.e.,the Lorentz force plays a dominant role,our numerical results suggest that Jupiter’s internal reference state,which remains poorly constrained,may play a minor role in the dynamo process of the planet.展开更多
Every year on 22 April, we have celebrated Earth Day and the beautiful planet we call home. Earth Day, established in 1970, has been used to highlight our planet’s environmental challenges and raise awareness of the ...Every year on 22 April, we have celebrated Earth Day and the beautiful planet we call home. Earth Day, established in 1970, has been used to highlight our planet’s environmental challenges and raise awareness of the importance of protecting our world for future generations [1]. To provide the protection of our planet, we should explain Earth’s environmental challenges to the best of our knowledge in frames of contemporary Geophysics. This paper gives a short overview of the developed Hypersphere World-Universe Model (WUM) and pay particular attention to the principal role of Dark Matter (DM) in the Earth’s life. In this manuscript, we discuss different aspects of the Earth: a condition of Young Earth before the Beginning of life on It;Internal Structure;“The 660-km Boundary” that we named Geomagma;Random Variations of Earth’s Rotational Speed on a daily basis;Origin of Moon;Expanding Earth;Internal Heating;Faint Young Sun paradox;Geocorona and Planetary Coronas;High-Energy Atmospheric Physics. WUM proposed principally different ways to solve the problems of Internal Heating, Origin of the Moon, and Faint Young Sun paradox based on DM core of the Earth. The Model revealed the fact that the Sun Activity causes the Geomagma Activity and, as a consequence, Random Variations of Earth’s Rotational Speed by the varying Sun’s magnetic field.展开更多
With the development of economy and the improvement of life quality, people's aesthetic demand is getting higher and higher, which puts forward the requirements of comfortable, beautiful and personalized clothing....With the development of economy and the improvement of life quality, people's aesthetic demand is getting higher and higher, which puts forward the requirements of comfortable, beautiful and personalized clothing. In the change of clothing styles, sleeves, as one of the most important internal components of clothing, play a vital role in the overall modeling of clothing. In this paper, through the methods of data collection and induction analysis, the sleeve's external profile is geometrically classified and the internal structure design technique is summarized, and the stereoscopic thinking is applied to the design of the sleeve-type modeling sleeve's planar structure, so as to explore the pattern design methods and rules. Through the practical application of typical cases, a high-efficiency and accurate pattern design method is summarized, which unifies the sleeve-type modeling sleeve's external profile and internal structure.展开更多
In today＇s economic situation, overcapacity of Chinese traditional manufacturing industry poses a serious threat to sustaineck rapid and healthy development of economy. The primary reasons of excess capacity of Chine...In today＇s economic situation, overcapacity of Chinese traditional manufacturing industry poses a serious threat to sustaineck rapid and healthy development of economy. The primary reasons of excess capacity of Chinese traditional manufacturing industry are the discordant between consumption and investment, the irrational industrial structure, export is not ideal and other causes. Overcapacity of traditional manufacturing industry will lead to business failures, unemployment citizen, deflation, financial risk and other series consequences. We should learn from foreign experience in the processing of excess capacity of traditional manufacturing industry and deal with excess capacity of traditional manufacturing industry in different aspects, so as to ensure stable and healthy development of our country＇ s economy.展开更多
Small bodies are among the best tracers of our Solar System’s history.A large number of space missions to small bodies(past and future)offer a unique opportunity to use these bodies as a natural laboratory to study t...Small bodies are among the best tracers of our Solar System’s history.A large number of space missions to small bodies(past and future)offer a unique opportunity to use these bodies as a natural laboratory to study the different processes,mechanical structures,and responses that drive the origin and evolution of small bodies,which are connected to the origin,evolution,and current architecture of the Solar System.Images of small bodies sent by spacecraft have revealed unexpectedly rich and complex geological worlds.In addition to very diverse compositions,small bodies in the Solar System have highly diverse shapes and structures,which reflect both different evolutionary paths and material properties.Furthermore,each individual body has diverse geological features on its surface,which include craters of various sizes and depths,boulders of different sizes and morphologies,lineaments,fractures,pits,signatures of landslides,terraces,and ridges.Such a geological richness could not be detected via ground-based observations,and we are still at the beginning of understanding their significance on the low-gravity surfaces on which they manifest.The combination of space mission data and numerical modeling allows us to enrich our understanding of the origin,evolution,and physical properties of these fascinating bodies.For instance,starting from the shape models,bulk densities,and spin rates determined from space mission data,we can investigate the formation mechanisms that lead to the observed properties of small bodies.We can also infer the interior and mechanical properties(e.g.,friction and cohesion)that allow a small body to be structurally stable,as well as its further potential evolution under processes such as a spin rate increase or an impact.Then,considering the various processes that these bodies experience during their evolution,we can investigate how these processes modify their properties and,in turn,how those properties influence the outcome of these processes.This paper reviews our current knowledge of small-body shapes and structures and discusses the various processes that are responsible for their formation and evolution,which can modify the characteristics of the bodies.We separately consider each population of small bodies,although in some cases,such as active asteroids and comets,the distinction between two populations solely in terms of physical properties is not clear.We then summarize the main findings regarding the physical properties of small bodies that have been the target of rendezvous or sample return missions.展开更多
基金Advanced Light Source,which is a DOE Office of Science User Facility under contract no.DE-AC02-05CH11231the Basque Government for funding through a PhD Fellowship(Grant no.PRE_2018_2_0285)+1 种基金through Egonlabur Travel Fellowship(Grant no.EP_2018_1_0004)partially supported by an Early Career Award in the Condensed Phase and Interfacial Molecular Science Program,in the Chemical Sciences Geosciences and Biosciences Division of the Office of Basic Energy Sciences of the U.S.Department of Energy under Contract No.DE-AC02-05CH11231.
文摘The development of an analytical method for determining the properties of quantum dots(QDs)is crucial for improving the optical performance of QD-based displays.Therefore,synchrotron-based X-ray photoelectron spectroscopy(XPS)is designed here to accurately characterize the chemical and structural differences between different QDs.This method enables the determination of the reason for the minimal differences between the optical properties of different QDs depending on the synthesis process,which is difficult to determine using conventional methods alone.Combined with model simulations,the XPS spectra obtained at different photon energies reveal the internal structures and chemical-state distributions of the QDs.In particular,the QD synthesized under optimal conditions demonstrates a relatively lower degree of oxidation of the core and more uniformly stacked ZnSe/ZnS shell layers.The internal structures and chemical-state distributions of QDs are closely related to their optical properties.Finally,the synchrotron-based XPS proposed here can be applied to compare nearly equivalent QDs with slightly different optical properties.
基金A CAS(Chinese Academy of Sciences)and CNOOC(China National Offshore Oil Corporation)collaborative research project
文摘Bedload sediment transport was estimated by the SEDTRANS96 model based on three-day hydrodynamics data obtained off the Dongfang coast in the Beibu Gulf during Typhoon Ketsana in September 2009. Bed- forms on the sea floor off the Dongfang coast and internal structures of a typical dune were interpreted to evaluate storm influences on individual dunes and the dune field. Results indicated that flow forcings and related bedload transport were both strengthened significantly due to Typhoon Ketsana. The measurements and modeling results, which mainly included three different stages, presented noticeable phasic variation. The three stages were dominated by tidal current （Period I）, tidal current combined with wind-induced waves （Period II）, and swells combined with tidal current and seaward flows （Period III）. This phasic varia- tion could be a common trait of hydrodynamics due to typhoons moving westwardly to the south of Hainan Island and Beibu Gulf in South China Sea. Results indicated that the maximum bedioad transport rate for every burst in Period III was almost 100 times larger than that in Period I and was ten times larger than that in Period II. However, the short-term increase in bedload transport induced by storms like Ketsana did not change the long-term evolution of dune morphology. Evidence was given by the internal structures of a typical dune, which revealed renewed modification under subsequent moderate conditions after storm ero- sion. Instead, storms may influence at different scales and regional allocation of sand dunes in some large areas because changes of the sea floor in large scales can hardly be recovered. More surveys during and after storm passage are also needed to document the level of positive contribution to forward migration.
文摘The internal structures of metallic products are important in realizing functional applications.Considering the manufacturing of inner structures,laser-based powder bed fusion(L-PBF)is an attractive approach because its layering principle enables the fabrication of parts with customized interior structures.However,the inferior surface quality of L-PBF components hinders its productization progress seriously.In this article,process,basic forms,and applications relevant to L-PBF internal structures are reviewed comprehensively.The causes of poor surface quality and differences in the microstructure and property of the surface features of L-PBF inner structures are presented to provide a perspective of their surface characteristics.Various polishing technologies for L-PBF components with inner structures are presented,whereas their strengths and weaknesses are summarized along with a discussion on the challenges and prospects for improving the interior surface quality of L-PBF parts.
基金funded by Project Supported by Postdoctoral Science Foundation of Jiangsu Province,Grant No.2019k237.
文摘The axial flux permanent magnet(AFPM)generator with double-sided internal stator structure is highly suitable for vertical axis wind turbines due to its high power density.The performance of the AFPM generator with double-sided internal stator structure can be improved by the reasonable design of electromagnetic parameters.To further improve the overall performance of the AFPM generator with double-sided internal stator structure,multivariable(coil widthω_(c),permanent magnet thickness h,pole arc coefficient α_(p) and working air gap l_(g))and multi-objective(generator efficiencyη,total harmonic distortion of the voltage THD and induced electromotive force amplitude EMF)functional relationships are innovatively established.Orthogonal analysis,mean analysis and variance analysis are performed on the influence parameters by combining the Taguchi method and response surface methodology to study the influence degrees of each influence parameter on the optimization objectives to determine the most appropriate electromagnetic parameters.The optimization results are verified by 3D finite element analysis.The optimized APFM generator with double-sided internal stator structure exhibits superior economy,stronger magnetic density,higher efficiency and improved power quality.
基金supported by the National Major Scientific Instruments and Equipment Development Projects of China(No.41827808)the Major Program of the National Natural Science Foundation of China(No.42090055)Supported by Science and Technology Projects of Xizang Autonomous Region,China(No.XZ202402ZD0001)。
文摘In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.
基金Supported by the State Ministry of Science and Technology of China(Nos.2013AA122803,2013AA09A502)the National Natural Science Foundation of China(Nos.41206001,41371496)+1 种基金the Natural Science Foundation of Shandong Province of China(No.ZR2014DM017)National Key Technology Research and Development Program(No.2013BAK05B04)
文摘Temporal variations in multimodal structures of diurnal( D_1) and semidiurnal( D_2) internal tides were investigated on the continental slope of the Dongsha Plateau, based on 2-month moored acoustic Doppler current profiler observations. Harmonic analysis indicated that the D_1 components( K_1 and O_1) dominated the internal tide field. The vertical structure of the K_1 constituent presented a first-mode structure while the M_2 constituent seemed to exhibit a high-mode structure. Amplitude spectra analysis of the current data revealed differences in baroclinic current amplitudes between different water depths. Temporal variations in modal structures ware analyzed, based on the D_1 and D_2 baroclinic tides extracted from the baroclinic velocity field with band-pass filters. Analysis showed that the magnitude of the D_1 internal tide current was much larger than the D_2 current, and temporal variations in the modal structure of the D_1 internal tide occurred on an approximately fortnightly cycle. The EOF analyses revealed temporal transformation of multimodal structures for D_1 and D_2 internal tides. The enhancement of the D_1 internal tide was mainly due to the superposition of K_1 and O_1, according to the temporal variation of coherent kinetic energy.
基金financially supported by the National Natural Science Foundation of China(22378115 and 22078090)the Shanghai Rising-Star Program(21QA1402000)+1 种基金the Natural Science Foundation of Shanghai(21ZR1418100)the Fundamental Research Funds for the Central Universities(JKA01231803)。
文摘Batch-processing wet-etch reactors are the key equipment widely used in chip fabrication,and their performance is largely affected by the internal structure.This work develops a three-dimensional computational fluid dynamics(CFD)model considering heat generation of wet-etching reactions to investigate the fluid flow and heat transfer in the wet-etch reactor.The backflow is observed below and above the wafer region,as the flow resistance in this region is high.The temperature on the upper part of a wafer is higher due to the accumulation of reaction heat,and the average temperature of the side wafer is highest as its convective heat transfer is weakest.Narrowing the gap between wafer and reactor wall can force the etchant to flow in the wafer region and then facilitate the convective heat transfer,leading to better within-wafer and wafer-to-wafer etch uniformities.An inlet angle of 60°balances fluid by-pass and mechanical energy loss,and it yields the best temperature and etch uniformities.The batch with 25wafers has much wider flow channels and much lower flow resistance compared with that with 50wafers,and thus it shows better temperature and etch uniformities.These results and the CFD model should serve to guide the optimal design of batch-processing wet-etch reactors.
基金The project supported by National Natural science Foundation of China
文摘The tidal current is generally predominant in China's offshore areas. The vertical structure of the observedtidal current is quite complicated with the presence of seasonal thermocline. The observed tidal current may be divided into two parts, an averaged barotropic tide current and a variation tide current. A method for studying the vertical structure of tidal current is developed from the constitution and distribution of energy, and the vertical structure of the observed tide current in the North Huanghai Sea is studied on the basis of the method. The result shows that the reason why the energy of the tidal current is concentrated on the neighbourhood of the thermocline mainly lies in the internal tides i under certain conditions, the fact that the direction of the internal tide current above the thermocline is opposite to the one below the thermocline will be able to cause the rotary directions of the observed tidal current above and below the thermocline to be in opposite. The interaction between the averaged barotropic and the variation tide current plays an important role in forming the vertical structure of the tidal current, and it is mainly the interaction that results in the inho-mogeneous distribution of the tide current energy in the entire water column ; the ratio between the total energies of the internal tide current above the thermocline and the variation tide current in the entire water column is greater than the ratio between the total energies of that below the thermocline and the variation's. In a strong internal tide area such as the neighbourhood of Station L4, at diurnal tide frequency, the above-mentioned corresponding ratios are about 38. 82% and 29. 88%, respectively, and the energy of the internal tide current is about 68. 70%of the energy of the variation tide current; at semidiurnal tide frequency, the above-mentioned corresponding ratios are about 26. 61 % and 19. 73% , respectively, and the total internal tide current energy is about 46. 36% of the total variation tide current energy.
文摘In this paper, based on the idea of finite element method, the initial parametric method in bending, problem of a beam is extended to analyse the bar-system structure by employing Dirac function and llcavisidc step function.Then a new method for analysing the internal forces and deformations of bar-system structure in space is suggested by improving the mixed method in statically indeterminate structure.The inferred process and obtained answer will be more succinct and accurate when the problem of internal forces and deformations of bar-system structure is analysed by using the new method provided in this paper.
基金Funded by the National Natural Science Foundation of China(No.51502179)the Colleges and Universities in Hebei Province Science and Technology Research Project(No.YQ2014033)the Hebei Key Discipline Construction Project(B2012210004 and E2013210038)
文摘We present the specific ab-initio calculations that detail the variations of perovskite BaZrO3 caused by in-plane strain. Specifically, the internal relaxation, which was not captured in the widely used biaxial strain model, was included in a complementary manner to lattice relaxation. Density functional theory as well as a hybrid functional method based on a plane wave basis set was employed to calculate the lattice structure, elastic constants, electronic properties and optical properties of perovskite BaZrO3. The lattice parameter c exhibited a clear linear dependence on the imposed in-plane strain, but the Poisson＇s ratio caused by internal relaxation was smaller than the elastic deformation, indicating an ＂inelastic＂ or ＂plastic＂ relaxation manner caused by the introduction of internal relaxation. As a result, the related electronic and optical properties of perovskite BaZrO3 were also strongly affected by the in-plane strain, which revealed an effective way to adjust the properties of perovskite BaZrO3 via internal relaxation.
基金supported by the Fundamental Research Funds for the Central Universities(No.226-2024-00038),China.
文摘The internal structures of cells as the basic units of life are a major wonder of the microscopic world.Cellular images provide an intriguing window to help explore and understand the composition and function of these structures.Scientific imagery combined with artistic expression can further expand the potential of imaging in educational dissemination and interdisciplinary applications.
基金Project supported by the National Natural Science Foundation of China (Nos. 50946052, 51076118 and 51006075)the New Century Excellent Talents (No. NCET-10-0605)+2 种基金the Shanghai Rising-Star Program (No. 11QH1402500)the Fundamental Research Funds for the Central Universitiesthe Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 200802471052)
文摘Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which reveal the internal surfaces and structures of orifices. To analyze the machining precision and characteristics of orifice processing methods, an ap- proach is presented based on the parameters of the internal structures of nozzle orifices, including the nozzle diameter, the orifice inner surface waviness, the eccentricity distance and the angle between orifices. Using this approach, two kinds of nozzle orifice processing methods, computerized numerical control drilling and electric discharge machining, have been studied and compared. The results show that this approach enables a simple, direct, and comprehensive contrastive analysis of nozzle orifice processing methods. When processing a single orifice, the electric discharge machining method has obvious advantages. However, when there are multiple orifices, the error levels of the two methods are similar in relation to the symmetry of distribution of the orifices.
基金Shanghai High-level Local University Innovation Team(Maritime Safety&Technical Support)the National Natural Science Foundation of China (Grant No. 42176217)
文摘Following developments in artificial intelligence and big data technology,the level of intelligence in intelligent vessels has been improved.Intelligent vessels are being developed into unmanned surface vehicles(USVs),which have widely interested scholars in the shipping industry due to their safety,high efficiency,and energy-saving qualities.Considering the current development of USVs,the types of USVs and applications domestically and internationally are being investigated.USVs emerged with technological developments and their characteristics show some differences from traditional vessels,which brings some problems and advantages for their application.Certain maritime regulations are not applicable to USVs and must be changed.The key technologies in the current development of USVs are being investigated.While the level of intelligence is improving,the protection of cargo cannot be neglected.An innovative approach to the internal structure of USVs is proposed,where the inner hull can automatically recover its original state in case of outer hull tilting.Finally,we summarize the development status of USVs,which are an inevitable direction of development in the marine field.
文摘There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote successful fabrication of small-diameter artificial blood vessels.From a physical perspective,the internal oriented structures of natural blood vessels plays an important role in guiding the directional growth of cells,improving the blood flow environment,and promoting the regeneration of vascular tissue.In this review,the effects of the oriented structures on cells,including endothelial cells(ECs),smooth muscle cells(SMCs)and stem cells,as well as the effect of the oriented structures on hemodynamics and vascular tissue remodeling and regeneration are introduced.Various forms of oriented structures(fibers,grooves,channels,etc.)and their construction methods are also reviewed.Conclusions and future perspectives are given.It is expected to give some references to relevant researches.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB4 1000000)the National Natural Science Foundation of China (Grant Nos. 42104006, 41974023, 42174101, 41874094, 41874026)the self-deployed foundation of the State Key Laboratory of Geodesy and Earth’s Dynamics (Grant No. S21L6404)
文摘The tidal Love numbers of the Moon are a set of nondimensional parameters that describe the deformation responses of the Moon to the tidal forces of external celestial bodies.They play an important role in the theoretical calculation of the Moon’s tidal deformation and the inversion of its internal structure.In this study,we introduce the basic theory for the theoretical calculation of the tidal Love numbers and propose a new method of solving the tidal Love numbers:the spectral element method.Moreover,we explain the mathematical theory and advantages of this method.On the basis of this new method,using 10 published lunar internal structure reference models,the lunar surface and lunar internal tidal Love numbers were calculated,and the influence of different lunar models on the calculated Love numbers was analyzed.Results of the calculation showed that the difference in the second-degree lunar surface Love numbers among different lunar models was within 8.5%,the influence on the maximum vertical displacement on the lunar surface could reach±8.5 mm,and the influence on the maximum gravity change could reach±6μGal.Regarding the influence on the Love numbers inside the Moon,different lunar models had a greater impact on the Love numbers h_(2) and l_(2) than on k_(2) in the lower lunar mantle and core.
基金supported by the B-type Strategic Priority Program of the CAS (XDB41000000)the preresearch project on Civil Aerospace Technologies of CNSA (D020308)the Macao Foundationsupport from STFC, grant number ST/S00047X/1 held at the University of Leeds.
文摘Jupiter’s magnetic field is thought to be generated in its deep metallic hydrogen region through dynamo action,yet the detailed dynamic process remains poorly understood.Numerical simulations have produced Jupiter-like magnetic fields,albeit using different control parameters and reference state models.In this study,we investigate the influence of different reference state models,based on ab initio calculations and based on the polytropic equation of state.In doing so,we perform five anelastic convection dynamo simulations that can be divided into two groups.In each group,different reference states are used while other control parameters and conditions are set to be identical.We find the reference state model can be very influential for the simulations in which buoyancy force is dominant over the Lorentz force.In this regime,different dynamical outcomes can be attributed to the effective buoyancy force resulting from different reference states.For simulations in which the Lorentz force is dominant over the buoyancy force,however,dynamo actions tend to be insensitive to different reference state models.If Jupiter’s dynamo is in a strong field regime,i.e.,the Lorentz force plays a dominant role,our numerical results suggest that Jupiter’s internal reference state,which remains poorly constrained,may play a minor role in the dynamo process of the planet.
文摘Every year on 22 April, we have celebrated Earth Day and the beautiful planet we call home. Earth Day, established in 1970, has been used to highlight our planet’s environmental challenges and raise awareness of the importance of protecting our world for future generations [1]. To provide the protection of our planet, we should explain Earth’s environmental challenges to the best of our knowledge in frames of contemporary Geophysics. This paper gives a short overview of the developed Hypersphere World-Universe Model (WUM) and pay particular attention to the principal role of Dark Matter (DM) in the Earth’s life. In this manuscript, we discuss different aspects of the Earth: a condition of Young Earth before the Beginning of life on It;Internal Structure;“The 660-km Boundary” that we named Geomagma;Random Variations of Earth’s Rotational Speed on a daily basis;Origin of Moon;Expanding Earth;Internal Heating;Faint Young Sun paradox;Geocorona and Planetary Coronas;High-Energy Atmospheric Physics. WUM proposed principally different ways to solve the problems of Internal Heating, Origin of the Moon, and Faint Young Sun paradox based on DM core of the Earth. The Model revealed the fact that the Sun Activity causes the Geomagma Activity and, as a consequence, Random Variations of Earth’s Rotational Speed by the varying Sun’s magnetic field.
文摘With the development of economy and the improvement of life quality, people's aesthetic demand is getting higher and higher, which puts forward the requirements of comfortable, beautiful and personalized clothing. In the change of clothing styles, sleeves, as one of the most important internal components of clothing, play a vital role in the overall modeling of clothing. In this paper, through the methods of data collection and induction analysis, the sleeve's external profile is geometrically classified and the internal structure design technique is summarized, and the stereoscopic thinking is applied to the design of the sleeve-type modeling sleeve's planar structure, so as to explore the pattern design methods and rules. Through the practical application of typical cases, a high-efficiency and accurate pattern design method is summarized, which unifies the sleeve-type modeling sleeve's external profile and internal structure.
文摘In today＇s economic situation, overcapacity of Chinese traditional manufacturing industry poses a serious threat to sustaineck rapid and healthy development of economy. The primary reasons of excess capacity of Chinese traditional manufacturing industry are the discordant between consumption and investment, the irrational industrial structure, export is not ideal and other causes. Overcapacity of traditional manufacturing industry will lead to business failures, unemployment citizen, deflation, financial risk and other series consequences. We should learn from foreign experience in the processing of excess capacity of traditional manufacturing industry and deal with excess capacity of traditional manufacturing industry in different aspects, so as to ensure stable and healthy development of our country＇ s economy.
基金We thank W.F.Bottke for his helpful and constructive comments.We acknowledge the support of the French Space Agency CNES for their participation in the various space missions devoted to asteroids,as well as the ESA.This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No.870377(project NEO-MAPP).Yun Zhang acknowledges funding support from the Doeblin Federation and from the program Bonus,Qualit´e,Recherche(BQR)of the Observatoire de la Cˆote d’Azur.
文摘Small bodies are among the best tracers of our Solar System’s history.A large number of space missions to small bodies(past and future)offer a unique opportunity to use these bodies as a natural laboratory to study the different processes,mechanical structures,and responses that drive the origin and evolution of small bodies,which are connected to the origin,evolution,and current architecture of the Solar System.Images of small bodies sent by spacecraft have revealed unexpectedly rich and complex geological worlds.In addition to very diverse compositions,small bodies in the Solar System have highly diverse shapes and structures,which reflect both different evolutionary paths and material properties.Furthermore,each individual body has diverse geological features on its surface,which include craters of various sizes and depths,boulders of different sizes and morphologies,lineaments,fractures,pits,signatures of landslides,terraces,and ridges.Such a geological richness could not be detected via ground-based observations,and we are still at the beginning of understanding their significance on the low-gravity surfaces on which they manifest.The combination of space mission data and numerical modeling allows us to enrich our understanding of the origin,evolution,and physical properties of these fascinating bodies.For instance,starting from the shape models,bulk densities,and spin rates determined from space mission data,we can investigate the formation mechanisms that lead to the observed properties of small bodies.We can also infer the interior and mechanical properties(e.g.,friction and cohesion)that allow a small body to be structurally stable,as well as its further potential evolution under processes such as a spin rate increase or an impact.Then,considering the various processes that these bodies experience during their evolution,we can investigate how these processes modify their properties and,in turn,how those properties influence the outcome of these processes.This paper reviews our current knowledge of small-body shapes and structures and discusses the various processes that are responsible for their formation and evolution,which can modify the characteristics of the bodies.We separately consider each population of small bodies,although in some cases,such as active asteroids and comets,the distinction between two populations solely in terms of physical properties is not clear.We then summarize the main findings regarding the physical properties of small bodies that have been the target of rendezvous or sample return missions.
