When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.Howe...When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.However,the key to the efficiency and return on investment of this hybrid energy system lies in the expected lifetime of the SOEC.This study assessed Ni-YSZ|YSZ|GDC|LSC fuel electrode support cells’long-term stability during electrolysis at 650℃with a current density of−0.5Acm^(−2)over 1818 h.The average voltage degradation rate of 2.63%kh^(−1)unfolded in two phases:an initial rapid decay(90 to 1120 h at 3.58%kh^(−1))and a stable decay(1120 to 1818 h at 2.14%kh^(−1)),emphasizing SOECs’probability coupling with nuclear reactors at 650℃.Post-1818-hour electrolysis revealed nickel particle formation associated with Ni(OH)_(x)diffusion and re-deposition,alongside a strontium-containing layer causing interface cracking.Despite minimal strontium segregation in the EDS,XPS data indicated surface segregation of Sr.This study provides crucial insights into prolonged SOEC operation,highlighting both its potential and challenges.展开更多
Cation disordering is a common issue in Ni-rich cathodes that significantly degrades cycle life and compromises safety.The cubic rock-salt phase formation and the slow oxidation kinetics of Ni^(2+)during solid-state s...Cation disordering is a common issue in Ni-rich cathodes that significantly degrades cycle life and compromises safety.The cubic rock-salt phase formation and the slow oxidation kinetics of Ni^(2+)during solid-state sintering are widely recognized as the principal causes of these structural defects.To solve this issue,a topotactic soft-chemical precursor engineering strategy is proposed for use in aqueous solution.By utilizing the layered structure of the precursor,this method allows for selective proton extraction and efficient Ni^(2+)oxidation,along with rapid Li+intercalation to form a layered lithiated intermediate.This intermediate crystallizes without further phase transitions during subsequent heat treatment,preventing structural defects caused by complex phase evolution and slow ion diffusion.The resulting cathode exhibits a long-range ordered layered structure and a uniform phase distribution,enabling efficient Li+insertion and extraction.Electrochemical tests reveal a high discharge capacity of 229.6 mAh g^(−1)and an initial coulombic efficiency of 95.77%at 0.1 C,greatly exceeding the performance of a conventionally synthesized cathode(210.3 mAh g^(−1),88.93%).Improved Li^(+)transport kinetics reduces phase-transition hysteresis and alleviates stress concentration,resulting in better cycling stability with a capacity retention of 85.3%after 300 cycles,compared to 61.5%for the conventional sample.This work presents a scalable and effective synthesis route for Ni-rich cathodes with reduced structural disorder and extended lifespan,providing valuable insights into how the regulation of intermediate phases influences electrochemical performance in high-performance Ni-rich cathodes.展开更多
Fabrication of large-area perovskite solar modules under ambient air conditions remains a critical challenge due to air sensitivity of perovskite intermediate phases during crystallization.Here,we introduce 2-iodoimid...Fabrication of large-area perovskite solar modules under ambient air conditions remains a critical challenge due to air sensitivity of perovskite intermediate phases during crystallization.Here,we introduce 2-iodoimidazole(IIZ)into the perovskite precursor,enabling the formation of an air-stable pureδ-phase intermediate,which,upon annealing,fully transforms into a highly orientedα-phase perovskite film with reduced defects and variability.Leveraging this approach,we achieve a stabilized power conversion efficiency of 20.9%for 927.5 cm^(2)perovskite solar modules with high reproducibility.The encapsulated modules meet stringent international photovoltaic testing standards(IEC61215:2021),demonstrating excellent stability under continuous operation,thermal cycling(-40 to 85℃)and damp heat(85℃ and 85%relative humidity).展开更多
To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general predic...To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general prediction frameworks.This study employs an integrated approach that combines true-triaxial unloading experiments with three-dimensional grain-based discrete element modeling(PFC3D-GBM)to examine the effects of σ_(2) on strain systematically burst and elucidate the underlying mechanisms.Through this dual experimental–numerical methodology,the strainburst characteristics under varying σ_(2) are analyzed in detail regarding mechanical responses,failure evolution and patterns,microscope fracture mechanisms,and energy partitioning.The results indicate that elevated σ_(2) can enhance the bearing capacity of rock,thereby necessitating a higher stress condition required for strainburst.However,it also enlarges the potential strainburst intensity,manifesting as deeper rockburst pits and more violent ejection of rock fragments.An increasing σ_(2) facilitates the microscope transgranular fractures,inhibits intergranular tensile fractures,and raises the kinetic energy conversion ratio slightly.It affects the intensity of strainburst through the following mechanisms,including the increase of energy storage limit,the intensification of Poisson effect for lateral expansion,and the enhancement of the transgranular fracturing mechanism.In practical engineering,the depth and range of support needs to be ensured under high σ_(2) conditions,and it is recommended to use prestressing techniques to control the development of significant slabbing.展开更多
By manipulating the distribution of surface electrons,defect engineering enables effective control over the adsorption energy between adsorbates and active sites in the CO_(2)reduction reaction(CO_(2)RR).Herein,we rep...By manipulating the distribution of surface electrons,defect engineering enables effective control over the adsorption energy between adsorbates and active sites in the CO_(2)reduction reaction(CO_(2)RR).Herein,we report a hollow indium oxide nanotube containing both oxygen vacancy and sulfur doping(V_o-Sx-In_(2)O_(3))for improved CO_(2)-to-HCOOH electroreduction and Zn-CO_(2)battery.The componential synergy significantly reduces the*OCHO formation barrier to expedite protonation process and creates a favorable electronic micro-environment for*HCOOH desorption.As a result,the CO_(2)RR performance of Vo-Sx-In_(2)O_(3)outperforms Pure-In_(2)O_(3)and V_o-In_(2)O_(3),where V_o-S53-In_(2)O_(3)exhibits a maximal HCOOH Faradaic efficiency of 92.4%at-1,2 V vs.reversible hydrogen electrode(RHE)in H-cell and above 92%over a wide window potential with high current density(119.1 mA cm^(-2)at-1.1 V vs.RHE)in flow cell.Furthermore,the rechargeable Zn-CO_(2)battery utilizing V_o-S53-In_(2)O_(3)as cathode shows a high power density of 2.29 mW cm^(-2)and a long-term stability during charge-discharge cycles.This work provides a valuable perspective to elucidate co-defective catalysts in regulating the intermediates for efficient CO_(2)RR.展开更多
Photodegradation of nonylphenol ethoxylates （NPloEO） was investigated in laboratory scale under UV irradiation. The intermediate photodegradation products were analyzed by LC-ESI-MS. Three kinds of intermediate prod...Photodegradation of nonylphenol ethoxylates （NPloEO） was investigated in laboratory scale under UV irradiation. The intermediate photodegradation products were analyzed by LC-ESI-MS. Three kinds of intermediate products including aldehydic compounds, carboxylic compounds and cyclohexanyl compounds were identified. Five main degradation routes involving the oxidation of the alkyl chain and ethoxylate unit, shortening of the alkyl chain and ethoxylate unit, hydrogenation of the benzene ring were proposed.展开更多
In two cases that upstream and downstream firms have the decision power of intermediate product prices in a two-level supply chain,the dynamic pricing mechanism of intermediate products is studied.When a party who has...In two cases that upstream and downstream firms have the decision power of intermediate product prices in a two-level supply chain,the dynamic pricing mechanism of intermediate products is studied.When a party who has the decision power of pricing gives prices of intermediate products,the other side will give the supply or demand quantity of intermediate products which maximizes its own profits,then the party who decides price has two pricing strategies.One uses the matching price which meets the other party's demand or supply needs according to the prices of intermediate products in the next cycle.The other uses the convex combinations of the current price and the matching price which satisfies the other party's demand or supply as the price of the intermediate product in the next cycle.No matter which side has the decision power of intermediate product prices between upstream and downstream firms,results show that in the first pricing strategy,only in one case of the pricing of intermediate products stable;but in the second pricing strategy,both of the cases of pricing of intermediate products are stable in a certain field of combined parameters.展开更多
Electrochemical CO2 reduction is a promising strategy for the utilization of CO2 and intermittent excess electricity.Cu is the only single metal catalyst that can electrochemically convert CO2 into multicarbon product...Electrochemical CO2 reduction is a promising strategy for the utilization of CO2 and intermittent excess electricity.Cu is the only single metal catalyst that can electrochemically convert CO2 into multicarbon products.However,Cu exhibits an unfavorable activity and selectivity for the generation of C2 products because of the insufficient amount of CO*provided for the C‐C coupling.Based on the strong CO2 adsorption and ultrafast reaction kinetics of CO*formation on Pd,an intimate CuPd(100)interface was designed to lower the intermediate reaction barriers and improve the efficiency of C2 product formation.Density functional theory(DFT)calculations showed that the CuPd(100)interface enhanced the CO2 adsorption and decreased the CO2*hydrogenation energy barrier,which was beneficial for the C‐C coupling.The potential‐determining step(PDS)barrier of CO2 to C2 products on the CuPd(100)interface was 0.61 eV,which was lower than that on Cu(100)(0.72 eV).Encouraged by the DFT calculation results,the CuPd(100)interface catalyst was prepared by a facile chemical solution method and characterized by transmission electron microscopy.CO2 temperature‐programmed desorption and gas sensor experiments further confirmed the enhancement of the CO2 adsorption and CO2*hydrogenation ability of the CuPd(100)interface catalyst.Specifically,the obtained CuPd(100)interface catalyst exhibited a C2 Faradaic efficiency of 50.3%±1.2%at‒1.4 VRHE in 0.1 M KHCO3,which was 2.1 times higher than that of the Cu catalyst(23.6%±1.5%).This study provides the basis for the rational design of Cu‐based electrocatalysts for the generation of multicarbon products by fine‐tuning the intermediate reaction barriers.展开更多
Production of biodiesel with supercritical methanol is a green synthesis process.A study was carried out in a vertical tubular reactor with a length of 3700 mm and a diameter of 20 mm at 275-375°C,15 MPa,and mola...Production of biodiesel with supercritical methanol is a green synthesis process.A study was carried out in a vertical tubular reactor with a length of 3700 mm and a diameter of 20 mm at 275-375°C,15 MPa,and molar ratio of methanol to soybean oil of 40︰1.The phase holdup,intermediate product,yield and axial distribution of methyl ester(ME) were investigated.Methanol and oil were mixed non-uniformly due to the formation of biodiesel and difference in their densities,even when the reaction system was in the supercritical state.From top to bottom,the phase holdup of methanol increased and that of oil decreased.As temperature increased,the concentrations of monoglyceride and diglyceride decreased gradually and the ME yield increased.When the temperature reached 300°C,the critical temperature of the system,the ME yield was 50%.Further increase in temperature led to a sharp in-crease of ME yield.However,at 375°C after 1200 s of reaction time,the decomposition rate of ME was greater than its formation rate,reducing the ME yield.展开更多
Excess greenhouse gas emissions,primarily carbon dioxide(CO_(2)),have caused major environmental concerns worldwide.The electroreduction of CO_(2)into valuable chemicals using renewable energy is an ecofriendly approa...Excess greenhouse gas emissions,primarily carbon dioxide(CO_(2)),have caused major environmental concerns worldwide.The electroreduction of CO_(2)into valuable chemicals using renewable energy is an ecofriendly approach to achieve carbon neutrality.In this regard,copper(Cu)has attracted considerable attention as the only known metallic catalyst available for converting CO_(2)to high-value multicarbon(C_(2+))products.The production of C_(2+)involves complicated C-C coupling steps and thus imposes high demands on intermediate regulation.In this review,we discuss multiple strategies for modulating intermediates to facilitate C_(2+)formation on Cu-based catalysts.Furthermore,several sophisticated in situ characterization techniques are outlined for elucidating the mechanism of C-C coupling.Lastly,the challenges and future directions of CO_(2)electroreduction to C_(2+)are envisioned.展开更多
Metal Sm has been widely used in making Al–Sm magnet alloy materials.Conventional distillation technology to produce Sm has the disadvantages of low productivity,high costs,and pollution generation.The objective of t...Metal Sm has been widely used in making Al–Sm magnet alloy materials.Conventional distillation technology to produce Sm has the disadvantages of low productivity,high costs,and pollution generation.The objective of this study was to develop a molten salt electrolyte system to produce Al–Sm alloy directly,with focus on the electrical conductivity and optimal operating conditions to minimize the energy consumption.The continuously varying cell constant(CVCC)technique was used to measure the conductivity for the Na3AlF6–AlF3–LiF–MgF2–Al2O3–Sm2O3electrolysis medium in the temperature range from 905 to 1055°C.The temperature(t)and the addition of Al2O3(W(Al2O3)),Sm2O3(W(Sm2O3)),and a combination of Al2O3and Sm2O3into the basic fluoride system were examined with respect to their effects on the conductivity(κ)and activation energy.The experimental results showed that the molten electrolyte conductivity increases with increasing temperature(t)and decreases with the addition of Al2O3or Sm2O3or both.We concluded that the optimal operation conditions for Al–Sm intermediate alloy production in the Na3AlF6–AlF3–LiF–MgF2–Al2O3–Sm2O3system are W(Al2O3)+W(Sm2O3)=3wt%,W(Al2O3):W(Sm2O3)=7:3,and a temperature of 965 to 995°C,which results in satisfactory conductivity,low fluoride evaporation losses,and low energy consumption.展开更多
Fracture(fault)reactivation can lead to dynamic geological hazards including earthquakes,rock collapses,landslides,and rock bursts.True triaxial compression tests were conducted to analyze the fracture reactivation pr...Fracture(fault)reactivation can lead to dynamic geological hazards including earthquakes,rock collapses,landslides,and rock bursts.True triaxial compression tests were conducted to analyze the fracture reactivation process under two different orientations of σ_(2),i.e.σ_(2) parallel to the fracture plane(Scheme 2)and σ_(2) cutting through the fracture plane(Scheme 3),under varying σ_(3) from 10 MPa to 40 MPa.The peak or fracture reactivation strength,deformation,failure mode,and post-peak mechanical behavior of intact(Scheme 1)and pre-fractured(Schemes 2 and 3)specimens were also compared.Results show that for intact specimens,the stress remains nearly constant in the residual sliding stage with no stick-slip,and the newly formed fracture surface only propagates along the σ_(2) direction when σ_(3) ranges from 10 MPa to 30 MPa,while it extends along both σ_(2) and σ_(3) directions when σ_(3) increases to 40 MPa;for the pre-fractured specimens,the fractures are usually reactivated under all the σ_(3) levels in Scheme 2,but fracture reactivation only occurs when σ_(3) is greater than 25 MPa in Scheme 3,below which new faulting traversing the original macro fracture occurs.In all the test schemes,both ε_(2) and ε_(3) experience an accumulative process of elongation,after which an abrupt change occurs at the point of the final failure;the degree of this change is dependent on the orientation of the new faulting or the slip direction of the original fracture,and it is generally more than 10 times larger in the slip direction of the original fracture than in the non-slip direction.Besides,the differential stress(peak stress)required for reactivation and the post-peak stress drop increase with increasing σ_(3).Post-peak stress drop and residual strength in Scheme 3 are generally greater than those in Scheme 2 at the same σ_(3) value.Our study clearly shows that intermediate principal stress orientation not only affects the fracture reactivation strength but also influences the slip deformation and failure modes.These new findings facilitate the mitigation of dynamic geological hazards associated with fracture and fault slip.展开更多
The formation of oligomeric hydrogen peroxide triggered by Criegee intermediate maybe contributes significantly to the formation and growth of secondary organic aerosol(SOA).However,to date,the reactivity of C2 Criege...The formation of oligomeric hydrogen peroxide triggered by Criegee intermediate maybe contributes significantly to the formation and growth of secondary organic aerosol(SOA).However,to date,the reactivity of C2 Criegee intermediates(CH_(3)CHOO)in areas contaminated with acidic gas remains poorly understood.Herein,high-level quantum chemical calculations and Born-Oppenheimer molecular dynamics(BOMD)simulations are used to explore the reaction of CH_(3)CHOO and H_(2)SO_(4)both in the gas phase and at the airwater interface.In the gas phase,the addition reaction of CH_(3)CHOO with H_(2)SO_(4)to generate CH_(3)HC(OOH)OSO_(3)H(HPES)is near-barrierless,regardless of the presence of water molecules.BOMD simulations showthat the reaction at the air-water interface is even faster than that in the gas phase.Further calculations reveal that the HPES has a tendency to aggregate with sulfuric acids,ammonias,and water molecules to form stable clusters,meanwhile the oligomerization reaction of CH_(3)CHOO with HPES in the gas phase is both thermochemically and kinetically favored.Also,it is noted that the interfacial HPES−ion can attract H_(2)SO_(4),NH_(3),(COOH)_(2)and HNO_(3)for particle formation from the gas phase to the water surface.Thus,the results of this work not only elucidate the high atmospheric reactivity of C2 Criegee intermediates in polluted regions,but also deepen our understanding of the formation process of atmospheric SOA induced by Criegee intermediates.展开更多
A series of true triaxial unloading tests are conducted on sandstone specimens with a single structural plane to investigate their mechanical behaviors and failure characteristics under different in situ stress states...A series of true triaxial unloading tests are conducted on sandstone specimens with a single structural plane to investigate their mechanical behaviors and failure characteristics under different in situ stress states.The experimental results indicate that the dip angle of structural plane(θ)and the intermediate principal stress(σ2)have an important influence on the peak strength,cracking mode,and rockburst severity.The peak strength exhibits a first increase and then decrease as a function ofσ2 for a constantθ.However,whenσ2 is constant,the maximum peak strength is obtained atθof 90°,and the minimum peak strength is obtained atθof 30°or 45°.For the case of an inclined structural plane,the crack type at the tips of structural plane transforms from a mix of wing and anti-wing cracks to wing cracks with an increase inσ2,while the crack type around the tips of structural plane is always anti-wing cracks for the vertical structural plane,accompanied by a series of tensile cracks besides.The specimens with structural plane do not undergo slabbing failure regardless ofθ,and always exhibit composite tensile-shear failure whatever theσ2 value is.With an increase inσ2 andθ,the intensity of the rockburst is consistent with the tendency of the peak strength.By analyzing the relationship between the cohesion(c),internal friction angle(φ),andθin sandstone specimens,we incorporateθinto the true triaxial unloading strength criterion,and propose a modified linear Mogi-Coulomb criterion.Moreover,the crack propagation mechanism at the tips of structural plane,and closure degree of the structural plane under true triaxial unloading conditions are also discussed and summarized.This study provides theoretical guidance for stability assessment of surrounding rocks containing geological structures in deep complex stress environments.展开更多
A TTT diagram for th ie precipitation formed at some intermediate temperatures through cooling from high lemperalure parenl phase in a Cu-27 27Zn-3.73Al allay is established by means of dilatormetric measurement.The m...A TTT diagram for th ie precipitation formed at some intermediate temperatures through cooling from high lemperalure parenl phase in a Cu-27 27Zn-3.73Al allay is established by means of dilatormetric measurement.The morphology and structure of transformation products formed at some intermediate tem peratures isothermally through cooling from high temperature parent phase and up-quenching from DO_(3) parent phase are studied by metallographic.X-ray and electron microscopy analyses.Three regions in the two separate C curves are obtained according to different morphology of precipitate:rod-like a,plate-like bainite and a rods,and bainite plates.Prolonged aging makes bainite plate change gradually into a whose lattice parameters are no different from that of a formed equilibriumly from parent phase.The structure is almost orthorhombic long period structure for bainites formed from B_(2) and DO_(3) parent phase,but monoclinic for martensite from DO_(3).They correspond to the overlapping and separating of(1210)and(2010)diffraction peaks respectively,showing the lower degree of ordering in bainite.展开更多
In situ electron paramagnetic resonance(EPR)monitoring of the photocatalytic halogen atom transfer(XAT)reaction with organic amines has provided insights into the dynamic transformations of intermediates,including cat...In situ electron paramagnetic resonance(EPR)monitoring of the photocatalytic halogen atom transfer(XAT)reaction with organic amines has provided insights into the dynamic transformations of intermediates,including catalyst intermediate states,amine alkyl radicals,and the dehalogenation of halogenated hydrocarbons to form carbon-centered radicals.This approach facilitated the photocatalytic single-linear state oxygen-promoted halogen atom transfer quinoxalinone alkylation reaction.展开更多
Intermediate filaments(IFs)in human cells are the products of six distinct gene families,all sharing homology in a core rod domain.These IFs assemble into non-polar polymers,providing cytoplasmic and nuclear mechanica...Intermediate filaments(IFs)in human cells are the products of six distinct gene families,all sharing homology in a core rod domain.These IFs assemble into non-polar polymers,providing cytoplasmic and nuclear mechanical support.Recent research has revealed the active and dynamic properties of IFs and their binding partners.This regulation extends beyond cell mechanics to include migration,mechanotransduction,and tumor growth.Therefore,this comprehensive review aims to catalog all human IF genes and IF-associated proteins(IFAPs),detailing their names,sizes,functions,associated human diseases,relevant literature,and links to resources like UniProt and the Protein Atlas database.These links provide access to additional information such as protein structure,subcellular localization,disease-causing mutations,and pathology.Using this catalog,we will provide an overview of the current understanding of the biological functions of IFs and IFAPs.This overview is crucial for identifying gaps in their characterization and understanding IF-mediated mechanotransduction.Additionally,we will consider potential future research directions.展开更多
Proton conducting ceramic cells(PCCs)are an attractive emerging technology operating in the intermediate temperature range of 500 to 700℃.In this work,we evaluate the production of hydrogen at intermediate temperatur...Proton conducting ceramic cells(PCCs)are an attractive emerging technology operating in the intermediate temperature range of 500 to 700℃.In this work,we evaluate the production of hydrogen at intermediate temperatures by proton conducting ceramic cell electrolysis(PCCEL).We demonstrate a highperformance steam electrolysis owing to a composite positrode based on BaGd_(0.8)La_(0.2)Co_(2)O_(6-δ)(BGLC1082)and BaZr0.5Ce0.4Y0.1O3-δ(BZCY541).The high reliability of PCCEL is demonstrated for 1680 h at a current density as high as-0.8 A cm^(-2)close to the thermoneutral cell voltage at 600℃.The electrolysis cell showed a specific energy consumption ranging from 54 to 66 kW h kg^(-1)that is comparable to state-of-the-art low temperature electrolysis technologies,while showing hydrogen production rates systematically higher than commercial solid oxide ceramic cells(SOCs).Compared to SOCs,the results verified the higher performances of PCCs at the relevant operating temperatures,due to the lower activation energy for proton transfer comparing with oxygen ion conduction.However,because of the p-type electronic conduction in protonic ceramics,the energy conversion rate of PCCs is relatively lower in steam electrolysis.The faradaic efficiency of the PCC in electrolysis mode can be increased at lower operating temperatures and in endothermic conditions,making PCCEL a technology of choice to valorize high temperature waste heat from industrial processes into hydrogen.To increase the faradaic efficiency by optimizing the materials,the cell design,or the operating strategy is a key challenge to address for future developments of PCCEL in order to achieve even more superior techno-economic merits.展开更多
BACKGROUND Diabetes and its associated microvascular complications,such as nephropathy and retinopathy,significantly impact global health.These complications often begin in the prediabetic stage,emphasizing the import...BACKGROUND Diabetes and its associated microvascular complications,such as nephropathy and retinopathy,significantly impact global health.These complications often begin in the prediabetic stage,emphasizing the importance of early detection and intervention.Inflammatory pathways are key contributors to these conditions,and recent research has identified members of the tumor necrosis factor(TNF)receptor superfamily as potential biomarkers.However,their association with renal and retinal dysfunction in individuals with intermediate hyperglycemia(IH)remains underexplored.The Early Prevention of Diabetes Complications(ePREDICE)trial provides a valuable cohort to investigate these associations and improve risk assessment strategies.AIM To identify inflammatory biomarkers associated with early renal and retinal dysfunction in individuals with IH.Specifically,we evaluate the diagnostic and prognostic potential of TNF receptor superfamily members[TNF receptor 1(TNF-R1),TNF receptor 2(TNF-R2)],T-cell immunoglobulin and mucin domain 3(TIM-3)/HAVCR2,galectin-3,and interleukin-6(IL-6)in detecting kidney dysfunction and retinopathy in this high-risk population.By understanding their roles,we seek to enhance early screening methods and inform personalized intervention strategies.METHODS A cross-sectional analysis of 967 individuals with IH from the ePREDICE trial was conducted.Participants underwent comprehensive anthropometric and biochemical assessments.Key inflammatory biomarkers,including TNF-R1,TNF-R2,TIM-3/HAVCR2,galectin-3,and IL-6,were quantified using immunoassays.Renal function was assessed using estimated glomerular filtration rate(eGFR)and albuminuria,while retinopathy was evaluated through fundoscopic examination.Statistical analyses included adjusted mean comparisons,correlation studies,and receiver operating characteristic curve analysis to assess biomarker diagnostic accuracy.RESULTS TNF-R1,TNF-R2,and TIM-3/HAVCR2 were significantly associated with reduced filtration function(eGFR<60 mL/minute/1.73 m^(2))and albuminuria,with area under the curve(AUC)values between 0.815 and 0.845.TIM-3/HAVCR2 emerged as the strongest predictor of retinopathy(AUC=0.737).Strong correlations(r>0.75)were observed among TNF-R1,TNF-R2,and TIM-3/HAVCR2,suggesting a coordinated role in inflammatory pathways.CONCLUSION Our findings highlight the potential of TNF receptor superfamily members as biomarkers for early-stage renal and retinal complications in individuals with IH.Their integration into clinical screening protocols could facilitate earlier detection,improving patient stratification and personalized management strategies.Further longitudinal studies are necessary to validate their predictive value and potential for guiding therapeutic interventions in IH and early diabetes management.展开更多
This study investigates the dynamical behavior of two parallel fluid-conveying pipes by developing a non-planar dynamical model of the two pipes coupled with an intermediate spring. A systematic analysis is conducted ...This study investigates the dynamical behavior of two parallel fluid-conveying pipes by developing a non-planar dynamical model of the two pipes coupled with an intermediate spring. A systematic analysis is conducted to evaluate the effects of spring parameters on the non-planar vibration characteristics and buckling behaviors of the coupled system. The nonlinear governing equations are derived with Hamilton's principle,subsequently discretized through Galerkin's method, and finally numerically solved by the Runge-Kutta algorithm. Based on the linearized equations, an eigenvalue analysis is performed to obtain the coupled frequencies, modal shapes, and critical flow velocities for buckling instability. Quantitative assessments further elucidate the effects of the spring position and stiffness coefficient on the coupled frequencies and critical flow velocities.Nonlinear dynamic analyses reveal the evolution of buckling patterns and bifurcation behaviors between the lateral displacements of the two pipes and the flow velocity. Numerical results indicate that the intermediate spring increases the susceptibility to buckling instability in the out-of-plane direction compared with the in-plane direction. Furthermore, synchronized lateral displacements emerge in both pipes when the flow velocity of one pipe exceeds the critical threshold. This work is expected to provide a theoretical foundation for the stability assessment and vibration analysis in coupled fluid-conveying pipe systems.展开更多
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA0400000),the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2021253)+1 种基金the Major Science and Technology Projects of China National Offshore Oil Corporation Limited during the 14th Five Year Plan(No.KJGG-2022-12-CCUS-030500)the Photon Science Center for Carbon Neutrality of Chinese Academy of Science.
文摘When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.However,the key to the efficiency and return on investment of this hybrid energy system lies in the expected lifetime of the SOEC.This study assessed Ni-YSZ|YSZ|GDC|LSC fuel electrode support cells’long-term stability during electrolysis at 650℃with a current density of−0.5Acm^(−2)over 1818 h.The average voltage degradation rate of 2.63%kh^(−1)unfolded in two phases:an initial rapid decay(90 to 1120 h at 3.58%kh^(−1))and a stable decay(1120 to 1818 h at 2.14%kh^(−1)),emphasizing SOECs’probability coupling with nuclear reactors at 650℃.Post-1818-hour electrolysis revealed nickel particle formation associated with Ni(OH)_(x)diffusion and re-deposition,alongside a strontium-containing layer causing interface cracking.Despite minimal strontium segregation in the EDS,XPS data indicated surface segregation of Sr.This study provides crucial insights into prolonged SOEC operation,highlighting both its potential and challenges.
基金the financial support from the Central South University Fundamental Research Funds (Grant No.2025ZZTS0444)the Innovation-Driven Research Program(Grant No. 2023 CXQD053)+3 种基金the National Natural Science Foundation of China (Grant No. 52274310)the financial support (Project No.H202111040350002)the provision of the hydroxide precursors from Ningbo Ronbay New Energy Technology Co.,Ltdsupported in part by the High-Performance Computing Center of Central South University
文摘Cation disordering is a common issue in Ni-rich cathodes that significantly degrades cycle life and compromises safety.The cubic rock-salt phase formation and the slow oxidation kinetics of Ni^(2+)during solid-state sintering are widely recognized as the principal causes of these structural defects.To solve this issue,a topotactic soft-chemical precursor engineering strategy is proposed for use in aqueous solution.By utilizing the layered structure of the precursor,this method allows for selective proton extraction and efficient Ni^(2+)oxidation,along with rapid Li+intercalation to form a layered lithiated intermediate.This intermediate crystallizes without further phase transitions during subsequent heat treatment,preventing structural defects caused by complex phase evolution and slow ion diffusion.The resulting cathode exhibits a long-range ordered layered structure and a uniform phase distribution,enabling efficient Li+insertion and extraction.Electrochemical tests reveal a high discharge capacity of 229.6 mAh g^(−1)and an initial coulombic efficiency of 95.77%at 0.1 C,greatly exceeding the performance of a conventionally synthesized cathode(210.3 mAh g^(−1),88.93%).Improved Li^(+)transport kinetics reduces phase-transition hysteresis and alleviates stress concentration,resulting in better cycling stability with a capacity retention of 85.3%after 300 cycles,compared to 61.5%for the conventional sample.This work presents a scalable and effective synthesis route for Ni-rich cathodes with reduced structural disorder and extended lifespan,providing valuable insights into how the regulation of intermediate phases influences electrochemical performance in high-performance Ni-rich cathodes.
基金supported by the National Key R&D Program of China(2023YFB4204504)National Science Fund for Dis-tinguished Young Scholars(T2325016)+7 种基金National Natural Science Foundation of China(U21A2076)Natural Science Foundation of Jiangsu Province(BK20232022,BE2022021 and BE2022026)Fundamental Research Funds for the Central Universities(0213/14380206 and 0205/14380252)Frontiers Science Center for Critical Earth Material Cycling Fund(DLTD2109 and 2024ZD06)Program for Innovative Talents and Entrepreneur in JiangsuChina Postdoctoral Science Foundation(2023M731579)Jiangsu Funding Program for Excellent Postdoctoral Talent(2023ZB348)Postdoctoral Innovative Talents Support Project from the China Postdoctoral Science Foundation(BX20230157)。
文摘Fabrication of large-area perovskite solar modules under ambient air conditions remains a critical challenge due to air sensitivity of perovskite intermediate phases during crystallization.Here,we introduce 2-iodoimidazole(IIZ)into the perovskite precursor,enabling the formation of an air-stable pureδ-phase intermediate,which,upon annealing,fully transforms into a highly orientedα-phase perovskite film with reduced defects and variability.Leveraging this approach,we achieve a stabilized power conversion efficiency of 20.9%for 927.5 cm^(2)perovskite solar modules with high reproducibility.The encapsulated modules meet stringent international photovoltaic testing standards(IEC61215:2021),demonstrating excellent stability under continuous operation,thermal cycling(-40 to 85℃)and damp heat(85℃ and 85%relative humidity).
基金supported by the National Natural Science Foundation of China(No.42507210)the Fundamental Research Funds for the Central Universities(No.2025XJSB01)+1 种基金the State Key Laboratory for Tunnel Engineering(No.SKLTEK202421)the Foundation of Key Laboratory of Deep Coal Resource Mining(China University of Mining and Technology),Ministry of Education(No.KLDCRMMOE24KF11).
文摘To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general prediction frameworks.This study employs an integrated approach that combines true-triaxial unloading experiments with three-dimensional grain-based discrete element modeling(PFC3D-GBM)to examine the effects of σ_(2) on strain systematically burst and elucidate the underlying mechanisms.Through this dual experimental–numerical methodology,the strainburst characteristics under varying σ_(2) are analyzed in detail regarding mechanical responses,failure evolution and patterns,microscope fracture mechanisms,and energy partitioning.The results indicate that elevated σ_(2) can enhance the bearing capacity of rock,thereby necessitating a higher stress condition required for strainburst.However,it also enlarges the potential strainburst intensity,manifesting as deeper rockburst pits and more violent ejection of rock fragments.An increasing σ_(2) facilitates the microscope transgranular fractures,inhibits intergranular tensile fractures,and raises the kinetic energy conversion ratio slightly.It affects the intensity of strainburst through the following mechanisms,including the increase of energy storage limit,the intensification of Poisson effect for lateral expansion,and the enhancement of the transgranular fracturing mechanism.In practical engineering,the depth and range of support needs to be ensured under high σ_(2) conditions,and it is recommended to use prestressing techniques to control the development of significant slabbing.
基金supported by the Fundamental Research Funds for the Central Universities(22120230104).
文摘By manipulating the distribution of surface electrons,defect engineering enables effective control over the adsorption energy between adsorbates and active sites in the CO_(2)reduction reaction(CO_(2)RR).Herein,we report a hollow indium oxide nanotube containing both oxygen vacancy and sulfur doping(V_o-Sx-In_(2)O_(3))for improved CO_(2)-to-HCOOH electroreduction and Zn-CO_(2)battery.The componential synergy significantly reduces the*OCHO formation barrier to expedite protonation process and creates a favorable electronic micro-environment for*HCOOH desorption.As a result,the CO_(2)RR performance of Vo-Sx-In_(2)O_(3)outperforms Pure-In_(2)O_(3)and V_o-In_(2)O_(3),where V_o-S53-In_(2)O_(3)exhibits a maximal HCOOH Faradaic efficiency of 92.4%at-1,2 V vs.reversible hydrogen electrode(RHE)in H-cell and above 92%over a wide window potential with high current density(119.1 mA cm^(-2)at-1.1 V vs.RHE)in flow cell.Furthermore,the rechargeable Zn-CO_(2)battery utilizing V_o-S53-In_(2)O_(3)as cathode shows a high power density of 2.29 mW cm^(-2)and a long-term stability during charge-discharge cycles.This work provides a valuable perspective to elucidate co-defective catalysts in regulating the intermediates for efficient CO_(2)RR.
文摘Photodegradation of nonylphenol ethoxylates （NPloEO） was investigated in laboratory scale under UV irradiation. The intermediate photodegradation products were analyzed by LC-ESI-MS. Three kinds of intermediate products including aldehydic compounds, carboxylic compounds and cyclohexanyl compounds were identified. Five main degradation routes involving the oxidation of the alkyl chain and ethoxylate unit, shortening of the alkyl chain and ethoxylate unit, hydrogenation of the benzene ring were proposed.
基金The National Key Technology R&D Program of China during the 11th Five-Year Plan Period(No.2006BAH02A06)
文摘In two cases that upstream and downstream firms have the decision power of intermediate product prices in a two-level supply chain,the dynamic pricing mechanism of intermediate products is studied.When a party who has the decision power of pricing gives prices of intermediate products,the other side will give the supply or demand quantity of intermediate products which maximizes its own profits,then the party who decides price has two pricing strategies.One uses the matching price which meets the other party's demand or supply needs according to the prices of intermediate products in the next cycle.The other uses the convex combinations of the current price and the matching price which satisfies the other party's demand or supply as the price of the intermediate product in the next cycle.No matter which side has the decision power of intermediate product prices between upstream and downstream firms,results show that in the first pricing strategy,only in one case of the pricing of intermediate products stable;but in the second pricing strategy,both of the cases of pricing of intermediate products are stable in a certain field of combined parameters.
文摘Electrochemical CO2 reduction is a promising strategy for the utilization of CO2 and intermittent excess electricity.Cu is the only single metal catalyst that can electrochemically convert CO2 into multicarbon products.However,Cu exhibits an unfavorable activity and selectivity for the generation of C2 products because of the insufficient amount of CO*provided for the C‐C coupling.Based on the strong CO2 adsorption and ultrafast reaction kinetics of CO*formation on Pd,an intimate CuPd(100)interface was designed to lower the intermediate reaction barriers and improve the efficiency of C2 product formation.Density functional theory(DFT)calculations showed that the CuPd(100)interface enhanced the CO2 adsorption and decreased the CO2*hydrogenation energy barrier,which was beneficial for the C‐C coupling.The potential‐determining step(PDS)barrier of CO2 to C2 products on the CuPd(100)interface was 0.61 eV,which was lower than that on Cu(100)(0.72 eV).Encouraged by the DFT calculation results,the CuPd(100)interface catalyst was prepared by a facile chemical solution method and characterized by transmission electron microscopy.CO2 temperature‐programmed desorption and gas sensor experiments further confirmed the enhancement of the CO2 adsorption and CO2*hydrogenation ability of the CuPd(100)interface catalyst.Specifically,the obtained CuPd(100)interface catalyst exhibited a C2 Faradaic efficiency of 50.3%±1.2%at‒1.4 VRHE in 0.1 M KHCO3,which was 2.1 times higher than that of the Cu catalyst(23.6%±1.5%).This study provides the basis for the rational design of Cu‐based electrocatalysts for the generation of multicarbon products by fine‐tuning the intermediate reaction barriers.
基金Supported by the National Natural Science Foundation of China（20576105） the Natural Science Foundation of Hubei Province（2008CDA024） the Project of Academic Leaders in Wuhan（200851430490）
文摘Production of biodiesel with supercritical methanol is a green synthesis process.A study was carried out in a vertical tubular reactor with a length of 3700 mm and a diameter of 20 mm at 275-375°C,15 MPa,and molar ratio of methanol to soybean oil of 40︰1.The phase holdup,intermediate product,yield and axial distribution of methyl ester(ME) were investigated.Methanol and oil were mixed non-uniformly due to the formation of biodiesel and difference in their densities,even when the reaction system was in the supercritical state.From top to bottom,the phase holdup of methanol increased and that of oil decreased.As temperature increased,the concentrations of monoglyceride and diglyceride decreased gradually and the ME yield increased.When the temperature reached 300°C,the critical temperature of the system,the ME yield was 50%.Further increase in temperature led to a sharp in-crease of ME yield.However,at 375°C after 1200 s of reaction time,the decomposition rate of ME was greater than its formation rate,reducing the ME yield.
基金support of the National Natural Science Foundation of China(Nos.51972223,51932005 and 22109116)the Natural Science Foundation of Tianjin(No.20JCYBJC01550)+1 种基金the Fundamental Research Funds for the Cen-tral Universitiesthe Haihe Laboratory of Sustainable Chemical Transformations.
文摘Excess greenhouse gas emissions,primarily carbon dioxide(CO_(2)),have caused major environmental concerns worldwide.The electroreduction of CO_(2)into valuable chemicals using renewable energy is an ecofriendly approach to achieve carbon neutrality.In this regard,copper(Cu)has attracted considerable attention as the only known metallic catalyst available for converting CO_(2)to high-value multicarbon(C_(2+))products.The production of C_(2+)involves complicated C-C coupling steps and thus imposes high demands on intermediate regulation.In this review,we discuss multiple strategies for modulating intermediates to facilitate C_(2+)formation on Cu-based catalysts.Furthermore,several sophisticated in situ characterization techniques are outlined for elucidating the mechanism of C-C coupling.Lastly,the challenges and future directions of CO_(2)electroreduction to C_(2+)are envisioned.
基金financially supported by the National Natural Science Foundation of China(Nos.51564015 and 51674126)the Graduate Student Innovation Special Fund of Jiangxi Province(YC2015-B064)+2 种基金the Science and Technology Research Project of Jiangxi Department of Education(GJJ150664)the Outstanding Doctoral Dissertation Project Fund of JXUST(YB2016007)the Scientific Research Fund of JXUST(NSFJ2014-G09)
文摘Metal Sm has been widely used in making Al–Sm magnet alloy materials.Conventional distillation technology to produce Sm has the disadvantages of low productivity,high costs,and pollution generation.The objective of this study was to develop a molten salt electrolyte system to produce Al–Sm alloy directly,with focus on the electrical conductivity and optimal operating conditions to minimize the energy consumption.The continuously varying cell constant(CVCC)technique was used to measure the conductivity for the Na3AlF6–AlF3–LiF–MgF2–Al2O3–Sm2O3electrolysis medium in the temperature range from 905 to 1055°C.The temperature(t)and the addition of Al2O3(W(Al2O3)),Sm2O3(W(Sm2O3)),and a combination of Al2O3and Sm2O3into the basic fluoride system were examined with respect to their effects on the conductivity(κ)and activation energy.The experimental results showed that the molten electrolyte conductivity increases with increasing temperature(t)and decreases with the addition of Al2O3or Sm2O3or both.We concluded that the optimal operation conditions for Al–Sm intermediate alloy production in the Na3AlF6–AlF3–LiF–MgF2–Al2O3–Sm2O3system are W(Al2O3)+W(Sm2O3)=3wt%,W(Al2O3):W(Sm2O3)=7:3,and a temperature of 965 to 995°C,which results in satisfactory conductivity,low fluoride evaporation losses,and low energy consumption.
基金funding support from the National Nature Science Foundation of China(Grant No.42272334)the National Key Research and Development Program of China(Grant No.2022YFE0137200)the Taishan Scholars Program(Grant No.2019RKB01083).
文摘Fracture(fault)reactivation can lead to dynamic geological hazards including earthquakes,rock collapses,landslides,and rock bursts.True triaxial compression tests were conducted to analyze the fracture reactivation process under two different orientations of σ_(2),i.e.σ_(2) parallel to the fracture plane(Scheme 2)and σ_(2) cutting through the fracture plane(Scheme 3),under varying σ_(3) from 10 MPa to 40 MPa.The peak or fracture reactivation strength,deformation,failure mode,and post-peak mechanical behavior of intact(Scheme 1)and pre-fractured(Schemes 2 and 3)specimens were also compared.Results show that for intact specimens,the stress remains nearly constant in the residual sliding stage with no stick-slip,and the newly formed fracture surface only propagates along the σ_(2) direction when σ_(3) ranges from 10 MPa to 30 MPa,while it extends along both σ_(2) and σ_(3) directions when σ_(3) increases to 40 MPa;for the pre-fractured specimens,the fractures are usually reactivated under all the σ_(3) levels in Scheme 2,but fracture reactivation only occurs when σ_(3) is greater than 25 MPa in Scheme 3,below which new faulting traversing the original macro fracture occurs.In all the test schemes,both ε_(2) and ε_(3) experience an accumulative process of elongation,after which an abrupt change occurs at the point of the final failure;the degree of this change is dependent on the orientation of the new faulting or the slip direction of the original fracture,and it is generally more than 10 times larger in the slip direction of the original fracture than in the non-slip direction.Besides,the differential stress(peak stress)required for reactivation and the post-peak stress drop increase with increasing σ_(3).Post-peak stress drop and residual strength in Scheme 3 are generally greater than those in Scheme 2 at the same σ_(3) value.Our study clearly shows that intermediate principal stress orientation not only affects the fracture reactivation strength but also influences the slip deformation and failure modes.These new findings facilitate the mitigation of dynamic geological hazards associated with fracture and fault slip.
基金supported by the National Natural Science Foundation of China(Nos.22073059 and 22203052)the Natural Science Foundation of Shaanxi Province(No.2022JM-060)+1 种基金the Education Department of Shaanxi Provincial Government(No.23JC023)the Key Cultivation Project of Shaanxi University of Technology(No.SLG2101)。
文摘The formation of oligomeric hydrogen peroxide triggered by Criegee intermediate maybe contributes significantly to the formation and growth of secondary organic aerosol(SOA).However,to date,the reactivity of C2 Criegee intermediates(CH_(3)CHOO)in areas contaminated with acidic gas remains poorly understood.Herein,high-level quantum chemical calculations and Born-Oppenheimer molecular dynamics(BOMD)simulations are used to explore the reaction of CH_(3)CHOO and H_(2)SO_(4)both in the gas phase and at the airwater interface.In the gas phase,the addition reaction of CH_(3)CHOO with H_(2)SO_(4)to generate CH_(3)HC(OOH)OSO_(3)H(HPES)is near-barrierless,regardless of the presence of water molecules.BOMD simulations showthat the reaction at the air-water interface is even faster than that in the gas phase.Further calculations reveal that the HPES has a tendency to aggregate with sulfuric acids,ammonias,and water molecules to form stable clusters,meanwhile the oligomerization reaction of CH_(3)CHOO with HPES in the gas phase is both thermochemically and kinetically favored.Also,it is noted that the interfacial HPES−ion can attract H_(2)SO_(4),NH_(3),(COOH)_(2)and HNO_(3)for particle formation from the gas phase to the water surface.Thus,the results of this work not only elucidate the high atmospheric reactivity of C2 Criegee intermediates in polluted regions,but also deepen our understanding of the formation process of atmospheric SOA induced by Criegee intermediates.
基金supports from the National Natural Science Foundation of China (Grant Nos.52004143 and 52374095)the open fund for the Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines (Grant No.SKLMRDPC21KF06).
文摘A series of true triaxial unloading tests are conducted on sandstone specimens with a single structural plane to investigate their mechanical behaviors and failure characteristics under different in situ stress states.The experimental results indicate that the dip angle of structural plane(θ)and the intermediate principal stress(σ2)have an important influence on the peak strength,cracking mode,and rockburst severity.The peak strength exhibits a first increase and then decrease as a function ofσ2 for a constantθ.However,whenσ2 is constant,the maximum peak strength is obtained atθof 90°,and the minimum peak strength is obtained atθof 30°or 45°.For the case of an inclined structural plane,the crack type at the tips of structural plane transforms from a mix of wing and anti-wing cracks to wing cracks with an increase inσ2,while the crack type around the tips of structural plane is always anti-wing cracks for the vertical structural plane,accompanied by a series of tensile cracks besides.The specimens with structural plane do not undergo slabbing failure regardless ofθ,and always exhibit composite tensile-shear failure whatever theσ2 value is.With an increase inσ2 andθ,the intensity of the rockburst is consistent with the tendency of the peak strength.By analyzing the relationship between the cohesion(c),internal friction angle(φ),andθin sandstone specimens,we incorporateθinto the true triaxial unloading strength criterion,and propose a modified linear Mogi-Coulomb criterion.Moreover,the crack propagation mechanism at the tips of structural plane,and closure degree of the structural plane under true triaxial unloading conditions are also discussed and summarized.This study provides theoretical guidance for stability assessment of surrounding rocks containing geological structures in deep complex stress environments.
基金supported by the National Natural Science Foundation
文摘A TTT diagram for th ie precipitation formed at some intermediate temperatures through cooling from high lemperalure parenl phase in a Cu-27 27Zn-3.73Al allay is established by means of dilatormetric measurement.The morphology and structure of transformation products formed at some intermediate tem peratures isothermally through cooling from high temperature parent phase and up-quenching from DO_(3) parent phase are studied by metallographic.X-ray and electron microscopy analyses.Three regions in the two separate C curves are obtained according to different morphology of precipitate:rod-like a,plate-like bainite and a rods,and bainite plates.Prolonged aging makes bainite plate change gradually into a whose lattice parameters are no different from that of a formed equilibriumly from parent phase.The structure is almost orthorhombic long period structure for bainites formed from B_(2) and DO_(3) parent phase,but monoclinic for martensite from DO_(3).They correspond to the overlapping and separating of(1210)and(2010)diffraction peaks respectively,showing the lower degree of ordering in bainite.
基金Project supported by the Domestic Visiting Fellows Program of Hangzhou Normal University(No.4095C5022521106)。
文摘In situ electron paramagnetic resonance(EPR)monitoring of the photocatalytic halogen atom transfer(XAT)reaction with organic amines has provided insights into the dynamic transformations of intermediates,including catalyst intermediate states,amine alkyl radicals,and the dehalogenation of halogenated hydrocarbons to form carbon-centered radicals.This approach facilitated the photocatalytic single-linear state oxygen-promoted halogen atom transfer quinoxalinone alkylation reaction.
基金the National Natural Science Foundation of China(Grant No.32070777 to F.N.).
文摘Intermediate filaments(IFs)in human cells are the products of six distinct gene families,all sharing homology in a core rod domain.These IFs assemble into non-polar polymers,providing cytoplasmic and nuclear mechanical support.Recent research has revealed the active and dynamic properties of IFs and their binding partners.This regulation extends beyond cell mechanics to include migration,mechanotransduction,and tumor growth.Therefore,this comprehensive review aims to catalog all human IF genes and IF-associated proteins(IFAPs),detailing their names,sizes,functions,associated human diseases,relevant literature,and links to resources like UniProt and the Protein Atlas database.These links provide access to additional information such as protein structure,subcellular localization,disease-causing mutations,and pathology.Using this catalog,we will provide an overview of the current understanding of the biological functions of IFs and IFAPs.This overview is crucial for identifying gaps in their characterization and understanding IF-mediated mechanotransduction.Additionally,we will consider potential future research directions.
基金The China Scholarship Council is acknowledged for the doctoral scholarship of Haoyu Zheng(201806160173)The German Federal Ministry for Education and Research is acknowledged for funding via the Project ARCADE(03SF0580A)。
文摘Proton conducting ceramic cells(PCCs)are an attractive emerging technology operating in the intermediate temperature range of 500 to 700℃.In this work,we evaluate the production of hydrogen at intermediate temperatures by proton conducting ceramic cell electrolysis(PCCEL).We demonstrate a highperformance steam electrolysis owing to a composite positrode based on BaGd_(0.8)La_(0.2)Co_(2)O_(6-δ)(BGLC1082)and BaZr0.5Ce0.4Y0.1O3-δ(BZCY541).The high reliability of PCCEL is demonstrated for 1680 h at a current density as high as-0.8 A cm^(-2)close to the thermoneutral cell voltage at 600℃.The electrolysis cell showed a specific energy consumption ranging from 54 to 66 kW h kg^(-1)that is comparable to state-of-the-art low temperature electrolysis technologies,while showing hydrogen production rates systematically higher than commercial solid oxide ceramic cells(SOCs).Compared to SOCs,the results verified the higher performances of PCCs at the relevant operating temperatures,due to the lower activation energy for proton transfer comparing with oxygen ion conduction.However,because of the p-type electronic conduction in protonic ceramics,the energy conversion rate of PCCs is relatively lower in steam electrolysis.The faradaic efficiency of the PCC in electrolysis mode can be increased at lower operating temperatures and in endothermic conditions,making PCCEL a technology of choice to valorize high temperature waste heat from industrial processes into hydrogen.To increase the faradaic efficiency by optimizing the materials,the cell design,or the operating strategy is a key challenge to address for future developments of PCCEL in order to achieve even more superior techno-economic merits.
基金Supported by the Instituto de Salud Carlos Ⅲ(ISCⅢ)Through the Project Co-Funded by the European Union,No.PI20-00487,No.PI23-00119 and No.PI24-01630.
文摘BACKGROUND Diabetes and its associated microvascular complications,such as nephropathy and retinopathy,significantly impact global health.These complications often begin in the prediabetic stage,emphasizing the importance of early detection and intervention.Inflammatory pathways are key contributors to these conditions,and recent research has identified members of the tumor necrosis factor(TNF)receptor superfamily as potential biomarkers.However,their association with renal and retinal dysfunction in individuals with intermediate hyperglycemia(IH)remains underexplored.The Early Prevention of Diabetes Complications(ePREDICE)trial provides a valuable cohort to investigate these associations and improve risk assessment strategies.AIM To identify inflammatory biomarkers associated with early renal and retinal dysfunction in individuals with IH.Specifically,we evaluate the diagnostic and prognostic potential of TNF receptor superfamily members[TNF receptor 1(TNF-R1),TNF receptor 2(TNF-R2)],T-cell immunoglobulin and mucin domain 3(TIM-3)/HAVCR2,galectin-3,and interleukin-6(IL-6)in detecting kidney dysfunction and retinopathy in this high-risk population.By understanding their roles,we seek to enhance early screening methods and inform personalized intervention strategies.METHODS A cross-sectional analysis of 967 individuals with IH from the ePREDICE trial was conducted.Participants underwent comprehensive anthropometric and biochemical assessments.Key inflammatory biomarkers,including TNF-R1,TNF-R2,TIM-3/HAVCR2,galectin-3,and IL-6,were quantified using immunoassays.Renal function was assessed using estimated glomerular filtration rate(eGFR)and albuminuria,while retinopathy was evaluated through fundoscopic examination.Statistical analyses included adjusted mean comparisons,correlation studies,and receiver operating characteristic curve analysis to assess biomarker diagnostic accuracy.RESULTS TNF-R1,TNF-R2,and TIM-3/HAVCR2 were significantly associated with reduced filtration function(eGFR<60 mL/minute/1.73 m^(2))and albuminuria,with area under the curve(AUC)values between 0.815 and 0.845.TIM-3/HAVCR2 emerged as the strongest predictor of retinopathy(AUC=0.737).Strong correlations(r>0.75)were observed among TNF-R1,TNF-R2,and TIM-3/HAVCR2,suggesting a coordinated role in inflammatory pathways.CONCLUSION Our findings highlight the potential of TNF receptor superfamily members as biomarkers for early-stage renal and retinal complications in individuals with IH.Their integration into clinical screening protocols could facilitate earlier detection,improving patient stratification and personalized management strategies.Further longitudinal studies are necessary to validate their predictive value and potential for guiding therapeutic interventions in IH and early diabetes management.
基金supported by the National Natural Science Foundation of China(Nos.12325201,12272140,and 12322201)。
文摘This study investigates the dynamical behavior of two parallel fluid-conveying pipes by developing a non-planar dynamical model of the two pipes coupled with an intermediate spring. A systematic analysis is conducted to evaluate the effects of spring parameters on the non-planar vibration characteristics and buckling behaviors of the coupled system. The nonlinear governing equations are derived with Hamilton's principle,subsequently discretized through Galerkin's method, and finally numerically solved by the Runge-Kutta algorithm. Based on the linearized equations, an eigenvalue analysis is performed to obtain the coupled frequencies, modal shapes, and critical flow velocities for buckling instability. Quantitative assessments further elucidate the effects of the spring position and stiffness coefficient on the coupled frequencies and critical flow velocities.Nonlinear dynamic analyses reveal the evolution of buckling patterns and bifurcation behaviors between the lateral displacements of the two pipes and the flow velocity. Numerical results indicate that the intermediate spring increases the susceptibility to buckling instability in the out-of-plane direction compared with the in-plane direction. Furthermore, synchronized lateral displacements emerge in both pipes when the flow velocity of one pipe exceeds the critical threshold. This work is expected to provide a theoretical foundation for the stability assessment and vibration analysis in coupled fluid-conveying pipe systems.
