The increasing scarcity of freshwater resources has driven the rapid emergence of solar-driven interfacial evaporators(SDIEs)as a sustainable approach to harvest fresh water by utilizing solar energy.Lignocellulosic b...The increasing scarcity of freshwater resources has driven the rapid emergence of solar-driven interfacial evaporators(SDIEs)as a sustainable approach to harvest fresh water by utilizing solar energy.Lignocellulosic biomass,featuring natural abundance,excellent renewability,unique natural structures,and superior biodegradability compared to the synthetic polymers,is highly attractive for constructing solar steam generators.This review aims to offer an innovative and in-depth insight into designing and optimizing highperformance integrated solar interfacial evaporators derived from renewable lignocellulosic biomass.First,the structural characteristics of lignocellulosic biomass are briefly introduced,serving as photothermal layer or supporting substrates in SDIEs.Secondly,the fabrication methods and processing technologies of lignocellulosic biomass-based evaporators are summarized from the perspective of photothermal layer and supporting substrates.Next,the most recent advances of regulation and optimization strategies are proposed to improve evaporation efficiency.Subsequently,this review summarizes the diverse functionalities of SDIEs,including desalination,power generation,wastewater treatment and antimicrobial,atmospheric water harvesting,and photocatalytic hydrogen production.Finally,the challenges in this field and outlook on the future development are discussed,which are anticipated to provide new opportunities for the advancement of lignocellulosic biomass-based SDIEs.展开更多
The preparation and functionalization of polymeric capsules attract intense attention due to their application in various areas.Herein we presented an amphiphilic alternating copolymer(ACP)-based microcapsule which is...The preparation and functionalization of polymeric capsules attract intense attention due to their application in various areas.Herein we presented an amphiphilic alternating copolymer(ACP)-based microcapsule which is both robust and readily-functionalized through interfacial click polymerization.A water-in-oil emulsion was constructed to act as the reaction medium,the hydrophilic 1,3-butadiene diepoxide(BDE)in water phase reacted with the oleophilic 1,4-dibutanedithiol(BDT)in oil phase at the water-oil interface to form the amphiphilic ACP named poly(2,3-dihydroxy butylene-alt-butylene dithioether)(abbreviated as P(DHB-a-BDT)below),which would deposite in situ to form the micro-sized capsules.Significantly,the dried capsules are robust enough to be rehydrated once the water was added and almost restored their original morphologies.Further elucidation showed that the Young's modulus of these capsules exceeded 1 GPa.As long as we know,it is the first time for the mechanical properties of the ACP-based microstructures being investigated.Besides,functionalization could be achieved simultaneously with the formation process.As a proof of concept,positive-charged capsules were successfully obtained through click copolymerization.Stemming from the unique characteristics of amphiphilic ACPs which combined both merits of click chemistry and interfacial reactions,all these features of the current method as well as the resultant capsules may promote the application of the polymeric capsules.展开更多
Low reactivity and appropriate wettability between molten superalloys and ceramic materials are crucial for the production of high-quality superalloy castings.The sessile-drop experiment was employed to systematically...Low reactivity and appropriate wettability between molten superalloys and ceramic materials are crucial for the production of high-quality superalloy castings.The sessile-drop experiment was employed to systematically investigate the interfacial reaction and wettability between the 4777DS1 superalloy and SiO_(2)-based ceramic core at various temperatures(1,480℃,1,500℃,1,520℃,and 1,550℃).The wetting behavior and interfacial reaction products at different temperatures were analyzed by scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and X-ray diffraction(XRD).The interfacial reaction process and products were discussed,and the thermodynamic behavior and interfacial reaction mechanisms were elucidated.The results demonstrate that the wetting behavior and interfacial reaction between the 4777DS1 alloy and the ceramic core are significantly influenced by temperature.The wettability angle exhibits a trend of initial decrease followed by an increase with rising temperature,reaching a maximum of 139°at 1,480℃,indicating poorer wettability of the 4777DS1 superalloy with the ceramic core and better casting properties at this specific temperature.The most intense interfacial reaction occurs at 1,520℃,resulting in the formation of the main interfacial reaction products such as Al_(2)O_(3),SiO_(2),and HfO_(2).Additionally,some crystal-like products rich in Si and Hf distribute on the reaction layer.展开更多
Peroxymonosulfate(PMS)-based advanced oxidation processes(AOPs)are an effective way to remove emerging contaminants(ECs)from water.The catalytic process involving PMS is hindered by the suboptimal electron trans-fer e...Peroxymonosulfate(PMS)-based advanced oxidation processes(AOPs)are an effective way to remove emerging contaminants(ECs)from water.The catalytic process involving PMS is hindered by the suboptimal electron trans-fer efficiency of current catalysts,the further application of AOPs technology is limited.Here,it is proposed that the interfacial electric field can be controlled by bor(B)-doped FeNC catalysts,which shows significant advantages in the efficient generation,release and participation of reactive oxygen species(ROS)in the reaction.The super exchange interaction between Fe sites and N and B sites is realized through the directional transfer of electrons in the interfacial electric field,which ensures the high efficiency and stability of the PMS catalytic process.B doping increases the d orbitals distribution at Fermi level,which facilitates enhanced electron transition activity,thereby promoting the effective generation of (1)^O_(2).At the same time,orbital hybridization causes the center of the d band to move to a lower energy level,which not only contributes to the desorption process of (1)^O_(2),but also accelerates its release.In addition,B-doping also improved the adsorption capacity of organic pollutants and shortened the migration distance of ROS,thereby significantly improving the degradation efficiency of ECs.The B-doping strategy outlined offers a novel approach to the development of FeNC catalysts,it lays a theoretical foundation and offers technical insights for the integration of PMS/AOPs technology in the ECs management.展开更多
Aqueous zinc-ion batteries(AZIBs)offer a safe,cost-effective,and high-capacity energy storage solution,yet their performance is hindered by interfacial challenges at the Zn anode,including hydrogen evolution,corrosion...Aqueous zinc-ion batteries(AZIBs)offer a safe,cost-effective,and high-capacity energy storage solution,yet their performance is hindered by interfacial challenges at the Zn anode,including hydrogen evolution,corrosion,and dendritic Zn growth.While most studies focus on regulating Zn~(2+)solvation structures in bulk electrolytes,the evolution of interfacial solvation—where Zn~(2+)undergoes desolvation and deposition—remains insufficiently explored.Here,we introduce sulfated nanocellulose(SNC),an anion-rich biopolymer,to tailor the interfacial solvation structure without altering the bulk electrolyte composition.Using in situ attenuated total reflection Fourier transform infrared spectroscopy and fluorescence interface-extended X-ray absorption fine structure,we reveal that SNC facilitates the formation of a low-coordinated Zn~(2+)solvation shell at the interface by weakening H_(2)O coordination.This transformation is driven by electrostatic interactions between Zn~(2+)and anchored sulfate groups,thereby reducing water activity,improving interfacial stability during charge/discharge,and suppressing parasitic reactions.Consequently,a high average coulombic efficiency of 99.6%over 500 cycles in Zn|Ti asymmetric cells and 1.5 Ah pouch cells(13.4 mg cm^(-2)loading,remained stable over 250 cycles)were achieved in SNC-induced AZIBs.This work underscores the importance of interfacial solvation structure engineering—beyond traditional bulk electrolyte design—in enabling practical,high-performance AZIBs.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
Carbon superstructures with multiscale hierarchies and functional attributes represent an appealing cathode candidate for zinc hybrid capacitors,but their tailor-made design to optimize the capacitive activity remains...Carbon superstructures with multiscale hierarchies and functional attributes represent an appealing cathode candidate for zinc hybrid capacitors,but their tailor-made design to optimize the capacitive activity remains a confusing topic.Here we develop a hydrogen-bond-oriented interfacial super-assembly strategy to custom-tailor nanosheet-intertwined spherical carbon superstructures(SCSs)for Zn-ion storage with double-high capacitive activity and durability.Tetrachlorobenzoquinone(H-bond acceptor)and dimethylbenzidine(H-bond donator)can interact to form organic nanosheet modules,which are sequentially assembled,orientally compacted and densified into well-orchestrated superstructures through multiple H-bonds(N-H···O).Featured with rich surface-active heterodiatomic motifs,more exposed nanoporous channels,and successive charge migration paths,SCSs cathode promises high accessibility of built-in zincophilic sites and rapid ion diffusion with low energy barriers(3.3Ωs-0.5).Consequently,the assembled Zn||SCSs capacitor harvests all-round improvement in Zn-ion storage metrics,including high energy density(166 Wh kg-1),high-rate performance(172 m Ah g^(-1)at 20 A g^(-1)),and long-lasting cycling lifespan(95.5%capacity retention after 500,000 cycles).An opposite chargecarrier storage mechanism is rationalized for SCSs cathode to maximize spatial capacitive charge storage,involving high-kinetics physical Zn^(2+)/CF_(3)SO_(3)-adsorption and chemical Zn^(2+)redox with carbonyl/pyridine groups.This work gives insights into H-bond-guided interfacial superassembly design of superstructural carbons toward advanced energy storage.展开更多
Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules wi...Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules with spatially heterogeneous patterns and slower dynamics compared to bulk water.Both the confinement and the surface atomic structures can induce the water phase transitions at low dimensional spaces.Here,we review how the phase transitions of interfacial water affect the surface physical behaviors,such as wetting,ice nucleation and the terahertz-wave-water interactions,from solid materials to the biological surfaces.These works help extend our knowledge of the physics properties of the interfacial water,particularly the multi-phase behaviors in materials and biology sciences.展开更多
Triclosan(TCS) poses harmful risks to ecosystems and human health owing to its endocrine-disrupting effects.Therefore,developing an efficient and sustainable technology to degrade TCS is urgently needed.Herein,cobalt ...Triclosan(TCS) poses harmful risks to ecosystems and human health owing to its endocrine-disrupting effects.Therefore,developing an efficient and sustainable technology to degrade TCS is urgently needed.Herein,cobalt oxyhydroxide @covalent organic frameworks(CoOOH@COFs) S-scheme heterojunction was synthesized,which combined the visible-light-driven photocatalysis and peroxymonosulfate(PMS) activation to synergistically generate abundant reactive oxygen species(ROSs) for TCS degradation.The degradation efficiency of TCS reached 100 % within 8 min in the Vis-CoOOH@COFs/PMS system,and the reaction rate constant was 0.456 min^(-1),which was nearly 1.90 and 2.85 times that of single Co OOH and COFs,and2.36 times that under dark condition,respectively.The density functional theory(DFT) calculations confirmed the energy band bending of CoOOH@COFs and S-scheme charge transport from COFs to Co OOH.Both experimental and theoretical analyses indicated that Co OOH@COFs in photocatalytic-PMS activation systems synergistically facilitated photo-generated carrier separation,enhanced interfacial electron transfer,accelerated PMS activation,and generated multiple ROSs.In particular,photogenerated electrons(e^(-))accelerated the Co(Ⅲ)/Co(Ⅱ) redox cycle,while the PMS captured the e-,which significantly decreased the charge combination of Co OOH@COFs.Radicals(O_(2)^(·-),^(·)OH,and SO_(4)^(·-)) and non-radicals(such as ^(1)O_(2),h^(+),and e^(-)) were both presented in the Vis-CoOOH@COFs/PMS system,with O_(2)^(-) playing a dominant role in TCS degradation.Furthermore,the pathway of TCS degradation and toxicity of intermediates were explored by DFT calculation and transformation product identification.Importantly,the environmentally friendly CoOOH@COFs S-scheme heterojunction exhibited excellent stability and reusability.In conclusion,this study innovatively designed an S-scheme heterojunction in the photocatalytic-PMS activation system,providing guidance and theoretical support for efficient and eco-friendly wastewater treatment.展开更多
Interfacial superconductivity(IS)has been a topic of intense interest in condensed matter physics,due to its unique properties and exotic photoelectrical performance.However,there are few reports about IS systems cons...Interfacial superconductivity(IS)has been a topic of intense interest in condensed matter physics,due to its unique properties and exotic photoelectrical performance.However,there are few reports about IS systems consisting of two insulators.Here,motivated by the emergence of an insulator-metal transition in type-Ⅲ heterostructures and the superconductivity in some“special”two-dimensional(2D)semiconductors via electron doping,we predict that the 2D heterostructure SnSe_(2)/PtTe_(2) is a model system for realizing IS by using firstprinciples calculations.Our results show that due to slight but crucial interlayer charge transfer,SnSe_(2)/PtTe_(2) turns to be a type-Ⅲ heterostructure with metallic properties and shows a superconducting transition with the critical temperature(T_(c))of 3.73 K.Similar to the enhanced electron–phonon coupling(EPC)in the electrondoped SnSe_(2) monolayer,the IS in the SnSe_(2)/PtTe_(2) heterostructure mainly originates from the metallized SnSe_(2) layer.Furthermore,we find that its superconductivity is sensitive to tensile lattice strain,forming a domeshaped superconducting phase diagram.Remarkably,at 7%biaxial tensile strain,the superconducting T_(c) can increase more than twofold(8.80 K),resulting from softened acoustic phonons at the𝑀point and enhanced EPC strength.Our study provides a concrete example for realizing IS in type-Ⅲ heterostructures,which waits for future experimental verification.展开更多
The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab b...The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.展开更多
Microbially induced calcium carbonate precipitation(MICP)is an eco-friendly technology for soil improvement.Although numerous experiments have been conducted to solidify sand foundations using MICP,the mechanisms by w...Microbially induced calcium carbonate precipitation(MICP)is an eco-friendly technology for soil improvement.Although numerous experiments have been conducted to solidify sand foundations using MICP,the mechanisms by which grain interfacial morphologies influencethe MICP process remain unclear.This study utilized 3D-printed flowcells with different boundary morphologies to investigate the effects of interfacial morphologies on the MICP process.CaCO_(3)precipitation characteristics were investigated through microscopic observation and image quantificationanalysis.The results indicate that low flowvelocities near the interface promote bacterial accumulation due to reduced hydrodynamic shear forces.Rough interfaces,compared to smooth ones,enhance bacterial adsorption owing to the larger regions of low flowvelocity,increased surface area,and the formation of local eddies,which promote greater CaCO_(3)precipitation.Compared to the regions away from the interface,a higher abundance of small CaCO_(3)crystals is observed near the interface because of the high urease activity from bacteria and the reduced shear-induced entrainment due to the low flowvelocity.Besides,larger crystals also preferentially precipitate in proximity to interfaces as the low flowvelocity enhances crystal growth according to the particle attachment theory.The presence of rough interfaces further reduces flowvelocities,leading to the precipitation of larger and more densely packed CaCO_(3)crystals.Therefore,rough interfaces promote the microbially induced calcium carbonate precipitation.This work is expected to enhance the understanding of microbially induced calcium carbonate precipitation characteristics on solid surfaces such as soil grains and contribute to the optimization of MICP applications.展开更多
Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding str...Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.展开更多
Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,a...Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.展开更多
The utilization of solar-driven interfacial evaporation technology is highly important in addressing the energy crisis and water scarcity,primarily because of its affordability and minimal energy usage.Enhancing the p...The utilization of solar-driven interfacial evaporation technology is highly important in addressing the energy crisis and water scarcity,primarily because of its affordability and minimal energy usage.Enhancing the performance of solar energy evaporation and minimizing material degradation during application can be achieved through the design of novel photothermal materials.In solar interfacial evaporation,photothermal materials exhibit a wide range of additional characteristics,but a systematic overview is lacking.This paper encompasses an examination of various categories and principles pertaining to photothermal materials,as well as the structural design considerations for salt-resistant materials.Additionally,we discuss the versatile uses of this appealing technology in different sectors related to energy and the environment.Furthermore,potential solutions to enhance the durability of photothermal materials are also highlighted,such as the rational design of micro/nano-structures,the use of adhesives,the addition of anti-corrosion coatings,and the preparation of self-healing surfaces.The objective of this review is to offer a viable resolution for the logical creation of high-performance photothermal substances,presenting a guide for the forthcoming advancement of solar evaporation technology.展开更多
Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare ...Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare sub-nanometric Pt clusters(~0.8 nm)encapsulated within the defects of CeO_(2)nanorods via an in-situ defect engineering methodology.The as-prepared Pt@d-CeO_(2)catalyst significantly boosts the activity and stability in the water-gas shift(WGS)reaction compared to other analogs.Based on controlled experiments and complementary(in-situ)spectroscopic studies,a reversible encapsulation induced by active site transformation between the Pt^(2+)-terminal hydroxyl and Pt^(δ+)-O vacancy species at the interface is revealed,which enables to evoke the enhanced performance.Our findings not only offer practical guidance for the design of high-efficiency catalysts but also bring a new understanding of the exceptional performance of WGS in a holistic view,which shows a great application potential in materials and catalysis.展开更多
Oil bodies(OBs)are the lipid-storage organelle in oilseed,and their interface properties are crucial for oilseed processing.To elucidate the effect of interfacial proteins on the functional properties of high-oleic an...Oil bodies(OBs)are the lipid-storage organelle in oilseed,and their interface properties are crucial for oilseed processing.To elucidate the effect of interfacial proteins on the functional properties of high-oleic and normal peanut OBs,OBs were extracted using ultrasound-assisted aqueous enzymatic extraction(AEE),and the effects of ultrasonic power(100–500 W)and extraction time(0–30 min)on the interface properties were investigated.These results indicate that the interfacial protein content and interface properties of OBs can be significantly affected by ultrasonic treatment.The interfacial protein content of high-oleic peanut OBs increased from 88.25%to 91.95%after ultrasonic treatment,which was 1.4 times that of normal peanuts OBs.The emulsifying activity index(EAI)and emulsion stability index(ESI)values of both peanut OBs increased with the increase in ultrasonic power and extraction time.These results suggest that the emulsification ability of OBs may be closely related to the interfacial protein content and therefore can be regulated by altering the interfacial protein content using ultrasonic treatment.However,the particle size of OBs tends to increase under low ultrasonic power(0–200 W)owing to the increase in the interfacial protein content and aggregation effects,whereas it decreases under high ultrasonic power(300 W–500 W)due to cavitation effects.This pattern of change in particle size was also confirmed by confocal laser scanning microscopy,which indicated that high ultrasonic power suppressed the contribution of the interfacial protein content to the particle size,but still improved the emulsification ability of the OBs by reducing the particle size and increasing the interfacial tension.Therefore,regulating the interfacial protein content of peanut OBs by adjusting ultrasonic power is a promising way to improve their functional properties.展开更多
Interfacial ferroelectricity is a recently established mechanism for generating spontaneous reversible electric polarization,arising from the charge transfer between stacked van der Waals layered atomic crystals.It ha...Interfacial ferroelectricity is a recently established mechanism for generating spontaneous reversible electric polarization,arising from the charge transfer between stacked van der Waals layered atomic crystals.It has been realized in both naturally formed multilayer crystals and moirésuperlattices.Owing to the large number of material choices and combinations,this approach is highly versatile,greatly expanding the scope of ultrathin ferroelectrics.A key advantage of interfacial ferroelectricity is its potential to couple with preexisting properties of the constituent layers,enabling their electrical manipulation through ferroelectric switching and paving the way for advanced device functionalities.This review article summarizes recent experimental progress in interfacial ferroelectricity,with an emphasis on its coupling with a variety of electronic properties.After introducing the underlying mechanism of interfacial ferroelectricity and the range of material systems discovered to date,we highlight selected examples showcasing ferroelectric control of excitonic optical properties,Berry curvature effects,and superconductivity.We also discuss the challenges and opportunities that await further studies in this field.展开更多
Fiber fabrics have been wildly utilized for solar interracial evaporators to address freshwater scarcity.However,the complex and expensive manufacturing processes remain limited to their scalable development.Herein,a ...Fiber fabrics have been wildly utilized for solar interracial evaporators to address freshwater scarcity.However,the complex and expensive manufacturing processes remain limited to their scalable development.Herein,a fabric-based Janus interracial evaporator is efficiently fabricated on a large scale by integrating an extremely innovative self-designed melt-centrifugal spinning technology with spray coating technology.The prepared fabric-based Janus interfacial evaporator has differential hydrophilicity,uneven surfaces,and channels that allow moisture escape.Benefiting from the excellent photothermai conversion of graphene oxide and the charge transfer actions of titanium dioxide,such a multifunction evaporator can reach a high evaporation rate of 1.72 kg m^(-2)h^(-1)under 1 sun irradiation,a superior antibacterial rate of 99%,excellent photocatalytic degradation,and effective thermoelectric ability simultaneously.Moreover,it also shows fantastic performance in salt resistance,recyclable evaporation,and real desalination,This work demonstrates a high-efficiency,cost-effective,multifunctional,and scalable strategy for high-performance fiber fabrics solar interfacial evaporation.展开更多
Surface engineering plays a crucial role in improving the performance of high energy materials,and polydopamine(PDA)is widely used in the field of energetic materials for surface modification and functionalization.In ...Surface engineering plays a crucial role in improving the performance of high energy materials,and polydopamine(PDA)is widely used in the field of energetic materials for surface modification and functionalization.In order to obtain high-quality HMX@PDA-based PBX explosives with high sphericity and a narrow particle size distribution,composite microspheres were prepared using co-axial droplet microfluidic technology.The formation mechanism,thermal behavior,mechanical sensitivity,electrostatic spark sensitivity,compressive strength,and combustion performance of the microspheres were investigated.The results show that PDA can effectively enhance the interfacial interaction between the explosive particles and the binder under the synergistic effect of chemical bonds and the physical"mechanical interlocking"structure.Interface reinforcement causes the thermal decomposition temperature of the sample microspheres to move to a higher temperature,with the sensitivity to impact,friction,and electrostatic sparks(for S-1)increasing by 12.5%,31.3%,and 81.5%respectively,and the compressive strength also increased by 30.7%,effectively enhancing the safety performance of the microspheres.Therefore,this study provides an effective and universal strategy for preparing high-quality functional explosives,and also provides some reference for the safe use of energetic materials in practical applications.展开更多
基金supported by grants from National Natural Science Foundation of China(224708046,22508229,22278049)Young Elite Scientists Sponsorship Program by CAST(2022QNRC001)+1 种基金Xingliao Talent Program-Young Top Talent(XLYC2403126)Liaoning Provincial Basic Scientific Research Project for Higher Education(LJ212510152013)。
文摘The increasing scarcity of freshwater resources has driven the rapid emergence of solar-driven interfacial evaporators(SDIEs)as a sustainable approach to harvest fresh water by utilizing solar energy.Lignocellulosic biomass,featuring natural abundance,excellent renewability,unique natural structures,and superior biodegradability compared to the synthetic polymers,is highly attractive for constructing solar steam generators.This review aims to offer an innovative and in-depth insight into designing and optimizing highperformance integrated solar interfacial evaporators derived from renewable lignocellulosic biomass.First,the structural characteristics of lignocellulosic biomass are briefly introduced,serving as photothermal layer or supporting substrates in SDIEs.Secondly,the fabrication methods and processing technologies of lignocellulosic biomass-based evaporators are summarized from the perspective of photothermal layer and supporting substrates.Next,the most recent advances of regulation and optimization strategies are proposed to improve evaporation efficiency.Subsequently,this review summarizes the diverse functionalities of SDIEs,including desalination,power generation,wastewater treatment and antimicrobial,atmospheric water harvesting,and photocatalytic hydrogen production.Finally,the challenges in this field and outlook on the future development are discussed,which are anticipated to provide new opportunities for the advancement of lignocellulosic biomass-based SDIEs.
基金financially supported by the Fundamental Research Funds for Central Universities(No.24D110627)。
文摘The preparation and functionalization of polymeric capsules attract intense attention due to their application in various areas.Herein we presented an amphiphilic alternating copolymer(ACP)-based microcapsule which is both robust and readily-functionalized through interfacial click polymerization.A water-in-oil emulsion was constructed to act as the reaction medium,the hydrophilic 1,3-butadiene diepoxide(BDE)in water phase reacted with the oleophilic 1,4-dibutanedithiol(BDT)in oil phase at the water-oil interface to form the amphiphilic ACP named poly(2,3-dihydroxy butylene-alt-butylene dithioether)(abbreviated as P(DHB-a-BDT)below),which would deposite in situ to form the micro-sized capsules.Significantly,the dried capsules are robust enough to be rehydrated once the water was added and almost restored their original morphologies.Further elucidation showed that the Young's modulus of these capsules exceeded 1 GPa.As long as we know,it is the first time for the mechanical properties of the ACP-based microstructures being investigated.Besides,functionalization could be achieved simultaneously with the formation process.As a proof of concept,positive-charged capsules were successfully obtained through click copolymerization.Stemming from the unique characteristics of amphiphilic ACPs which combined both merits of click chemistry and interfacial reactions,all these features of the current method as well as the resultant capsules may promote the application of the polymeric capsules.
基金supported by the fund of State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment(No.DEC8300CG202210353EE280297)the China Postdoctoral Science Foundation(No.2021M692555)+1 种基金the Shaanxi Province Qinchuangyuan‘Scientists+Engineers’Team Building Project(No.2023KXJ-266)the Fundamental Research Funds for the Central Universities(No.xzy012023145)。
文摘Low reactivity and appropriate wettability between molten superalloys and ceramic materials are crucial for the production of high-quality superalloy castings.The sessile-drop experiment was employed to systematically investigate the interfacial reaction and wettability between the 4777DS1 superalloy and SiO_(2)-based ceramic core at various temperatures(1,480℃,1,500℃,1,520℃,and 1,550℃).The wetting behavior and interfacial reaction products at different temperatures were analyzed by scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),and X-ray diffraction(XRD).The interfacial reaction process and products were discussed,and the thermodynamic behavior and interfacial reaction mechanisms were elucidated.The results demonstrate that the wetting behavior and interfacial reaction between the 4777DS1 alloy and the ceramic core are significantly influenced by temperature.The wettability angle exhibits a trend of initial decrease followed by an increase with rising temperature,reaching a maximum of 139°at 1,480℃,indicating poorer wettability of the 4777DS1 superalloy with the ceramic core and better casting properties at this specific temperature.The most intense interfacial reaction occurs at 1,520℃,resulting in the formation of the main interfacial reaction products such as Al_(2)O_(3),SiO_(2),and HfO_(2).Additionally,some crystal-like products rich in Si and Hf distribute on the reaction layer.
基金supported by the National Natural Science Foundation of China(No.22278156)the Guangdong Special Support Program Project(No.2021JC060580)+1 种基金the Young Elite Scientists Sponsorship Program by CAST-Doctoral Student Special Plan,the China Scholarship Council Program(No.202406150148)the Natural Science Foundation of Guangdong Province(No.2023A1515011186).
文摘Peroxymonosulfate(PMS)-based advanced oxidation processes(AOPs)are an effective way to remove emerging contaminants(ECs)from water.The catalytic process involving PMS is hindered by the suboptimal electron trans-fer efficiency of current catalysts,the further application of AOPs technology is limited.Here,it is proposed that the interfacial electric field can be controlled by bor(B)-doped FeNC catalysts,which shows significant advantages in the efficient generation,release and participation of reactive oxygen species(ROS)in the reaction.The super exchange interaction between Fe sites and N and B sites is realized through the directional transfer of electrons in the interfacial electric field,which ensures the high efficiency and stability of the PMS catalytic process.B doping increases the d orbitals distribution at Fermi level,which facilitates enhanced electron transition activity,thereby promoting the effective generation of (1)^O_(2).At the same time,orbital hybridization causes the center of the d band to move to a lower energy level,which not only contributes to the desorption process of (1)^O_(2),but also accelerates its release.In addition,B-doping also improved the adsorption capacity of organic pollutants and shortened the migration distance of ROS,thereby significantly improving the degradation efficiency of ECs.The B-doping strategy outlined offers a novel approach to the development of FeNC catalysts,it lays a theoretical foundation and offers technical insights for the integration of PMS/AOPs technology in the ECs management.
基金the National Natural Science Foundation of China(No.22379047)Yinzhou R&D Team(X.W.)+2 种基金Guangdong Basic and Applied Basic Research Foundation(2022B1515120019)the Project Funded by the China Scholarship Council(No.202108320278)the support from the Vacuum Interconnected Nanotech Workstation(Nano-X)from Suzhou Institute of Nano-Tech and Nano-Bionics,Chinese Academy of Sciences(SINANO)。
文摘Aqueous zinc-ion batteries(AZIBs)offer a safe,cost-effective,and high-capacity energy storage solution,yet their performance is hindered by interfacial challenges at the Zn anode,including hydrogen evolution,corrosion,and dendritic Zn growth.While most studies focus on regulating Zn~(2+)solvation structures in bulk electrolytes,the evolution of interfacial solvation—where Zn~(2+)undergoes desolvation and deposition—remains insufficiently explored.Here,we introduce sulfated nanocellulose(SNC),an anion-rich biopolymer,to tailor the interfacial solvation structure without altering the bulk electrolyte composition.Using in situ attenuated total reflection Fourier transform infrared spectroscopy and fluorescence interface-extended X-ray absorption fine structure,we reveal that SNC facilitates the formation of a low-coordinated Zn~(2+)solvation shell at the interface by weakening H_(2)O coordination.This transformation is driven by electrostatic interactions between Zn~(2+)and anchored sulfate groups,thereby reducing water activity,improving interfacial stability during charge/discharge,and suppressing parasitic reactions.Consequently,a high average coulombic efficiency of 99.6%over 500 cycles in Zn|Ti asymmetric cells and 1.5 Ah pouch cells(13.4 mg cm^(-2)loading,remained stable over 250 cycles)were achieved in SNC-induced AZIBs.This work underscores the importance of interfacial solvation structure engineering—beyond traditional bulk electrolyte design—in enabling practical,high-performance AZIBs.
基金financially supported by the National Nature Science Foundation of China (62504130)National Key Research and Development Program of China (2018YFB0704100)+3 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong (Y01256331)the Technology Development Project of Henan Province (252102240047)the Pico Center at SUSTech CRF which receives support from the Presidential FundDevelopment and Reform Commission of Shenzhen Municipality
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金financially supported by the National Natural Science Foundation of China(Nos.22272118,22172111,and 22309134)the Science and Technology Commission of Shanghai Municipality,China(Nos.22ZR1464100,20ZR1460300,and 19DZ2271500)+2 种基金the China Postdoctoral Science Foundation(2022M712402),the Shanghai Rising-Star Program(23YF1449200)the Zhejiang Provincial Science and Technology Project(2022C01182)the Fundamental Research Funds for the Central Universities(2023-3-YB-07)。
文摘Carbon superstructures with multiscale hierarchies and functional attributes represent an appealing cathode candidate for zinc hybrid capacitors,but their tailor-made design to optimize the capacitive activity remains a confusing topic.Here we develop a hydrogen-bond-oriented interfacial super-assembly strategy to custom-tailor nanosheet-intertwined spherical carbon superstructures(SCSs)for Zn-ion storage with double-high capacitive activity and durability.Tetrachlorobenzoquinone(H-bond acceptor)and dimethylbenzidine(H-bond donator)can interact to form organic nanosheet modules,which are sequentially assembled,orientally compacted and densified into well-orchestrated superstructures through multiple H-bonds(N-H···O).Featured with rich surface-active heterodiatomic motifs,more exposed nanoporous channels,and successive charge migration paths,SCSs cathode promises high accessibility of built-in zincophilic sites and rapid ion diffusion with low energy barriers(3.3Ωs-0.5).Consequently,the assembled Zn||SCSs capacitor harvests all-round improvement in Zn-ion storage metrics,including high energy density(166 Wh kg-1),high-rate performance(172 m Ah g^(-1)at 20 A g^(-1)),and long-lasting cycling lifespan(95.5%capacity retention after 500,000 cycles).An opposite chargecarrier storage mechanism is rationalized for SCSs cathode to maximize spatial capacitive charge storage,involving high-kinetics physical Zn^(2+)/CF_(3)SO_(3)-adsorption and chemical Zn^(2+)redox with carbonyl/pyridine groups.This work gives insights into H-bond-guided interfacial superassembly design of superstructural carbons toward advanced energy storage.
基金supported by the National Natural Science Foundation of China(Grant Nos.22576126,12074394,12022508).
文摘Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules with spatially heterogeneous patterns and slower dynamics compared to bulk water.Both the confinement and the surface atomic structures can induce the water phase transitions at low dimensional spaces.Here,we review how the phase transitions of interfacial water affect the surface physical behaviors,such as wetting,ice nucleation and the terahertz-wave-water interactions,from solid materials to the biological surfaces.These works help extend our knowledge of the physics properties of the interfacial water,particularly the multi-phase behaviors in materials and biology sciences.
文摘Triclosan(TCS) poses harmful risks to ecosystems and human health owing to its endocrine-disrupting effects.Therefore,developing an efficient and sustainable technology to degrade TCS is urgently needed.Herein,cobalt oxyhydroxide @covalent organic frameworks(CoOOH@COFs) S-scheme heterojunction was synthesized,which combined the visible-light-driven photocatalysis and peroxymonosulfate(PMS) activation to synergistically generate abundant reactive oxygen species(ROSs) for TCS degradation.The degradation efficiency of TCS reached 100 % within 8 min in the Vis-CoOOH@COFs/PMS system,and the reaction rate constant was 0.456 min^(-1),which was nearly 1.90 and 2.85 times that of single Co OOH and COFs,and2.36 times that under dark condition,respectively.The density functional theory(DFT) calculations confirmed the energy band bending of CoOOH@COFs and S-scheme charge transport from COFs to Co OOH.Both experimental and theoretical analyses indicated that Co OOH@COFs in photocatalytic-PMS activation systems synergistically facilitated photo-generated carrier separation,enhanced interfacial electron transfer,accelerated PMS activation,and generated multiple ROSs.In particular,photogenerated electrons(e^(-))accelerated the Co(Ⅲ)/Co(Ⅱ) redox cycle,while the PMS captured the e-,which significantly decreased the charge combination of Co OOH@COFs.Radicals(O_(2)^(·-),^(·)OH,and SO_(4)^(·-)) and non-radicals(such as ^(1)O_(2),h^(+),and e^(-)) were both presented in the Vis-CoOOH@COFs/PMS system,with O_(2)^(-) playing a dominant role in TCS degradation.Furthermore,the pathway of TCS degradation and toxicity of intermediates were explored by DFT calculation and transformation product identification.Importantly,the environmentally friendly CoOOH@COFs S-scheme heterojunction exhibited excellent stability and reusability.In conclusion,this study innovatively designed an S-scheme heterojunction in the photocatalytic-PMS activation system,providing guidance and theoretical support for efficient and eco-friendly wastewater treatment.
基金supported by the National Key R&D Program of China (Grant Nos.2022YFA1403103 and 2019YFA0308603)the National Natural Science Foundation of China (Grant No.12304167)the Shandong Provincial Natural Science Foundation of China (Grant No.ZR2023QA020)。
文摘Interfacial superconductivity(IS)has been a topic of intense interest in condensed matter physics,due to its unique properties and exotic photoelectrical performance.However,there are few reports about IS systems consisting of two insulators.Here,motivated by the emergence of an insulator-metal transition in type-Ⅲ heterostructures and the superconductivity in some“special”two-dimensional(2D)semiconductors via electron doping,we predict that the 2D heterostructure SnSe_(2)/PtTe_(2) is a model system for realizing IS by using firstprinciples calculations.Our results show that due to slight but crucial interlayer charge transfer,SnSe_(2)/PtTe_(2) turns to be a type-Ⅲ heterostructure with metallic properties and shows a superconducting transition with the critical temperature(T_(c))of 3.73 K.Similar to the enhanced electron–phonon coupling(EPC)in the electrondoped SnSe_(2) monolayer,the IS in the SnSe_(2)/PtTe_(2) heterostructure mainly originates from the metallized SnSe_(2) layer.Furthermore,we find that its superconductivity is sensitive to tensile lattice strain,forming a domeshaped superconducting phase diagram.Remarkably,at 7%biaxial tensile strain,the superconducting T_(c) can increase more than twofold(8.80 K),resulting from softened acoustic phonons at the𝑀point and enhanced EPC strength.Our study provides a concrete example for realizing IS in type-Ⅲ heterostructures,which waits for future experimental verification.
基金supported by a grant from China railway corporation science and technology research and development plan project(Grant No.2017G005-B)funding support by Wuyi University’s Hong Kong and Macao Joint Research and Development Fund(Grants No.2021WGALH15)funding support by the Innovation and Technology Commission of Hong Kong SAR Government to the Hong Kong Branch of National Rail Transit Electrification and Automation Engineering Technology Research Center(Grant No.K-BBY1).
文摘The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFC3707900)National Natural Science Foundation of China(Grant No.42230710,42525201)Key task project for joint research and development of the Yangtze River Delta Science and Technology Innovation Community(Grant No.2022CSJGG1200).
文摘Microbially induced calcium carbonate precipitation(MICP)is an eco-friendly technology for soil improvement.Although numerous experiments have been conducted to solidify sand foundations using MICP,the mechanisms by which grain interfacial morphologies influencethe MICP process remain unclear.This study utilized 3D-printed flowcells with different boundary morphologies to investigate the effects of interfacial morphologies on the MICP process.CaCO_(3)precipitation characteristics were investigated through microscopic observation and image quantificationanalysis.The results indicate that low flowvelocities near the interface promote bacterial accumulation due to reduced hydrodynamic shear forces.Rough interfaces,compared to smooth ones,enhance bacterial adsorption owing to the larger regions of low flowvelocity,increased surface area,and the formation of local eddies,which promote greater CaCO_(3)precipitation.Compared to the regions away from the interface,a higher abundance of small CaCO_(3)crystals is observed near the interface because of the high urease activity from bacteria and the reduced shear-induced entrainment due to the low flowvelocity.Besides,larger crystals also preferentially precipitate in proximity to interfaces as the low flowvelocity enhances crystal growth according to the particle attachment theory.The presence of rough interfaces further reduces flowvelocities,leading to the precipitation of larger and more densely packed CaCO_(3)crystals.Therefore,rough interfaces promote the microbially induced calcium carbonate precipitation.This work is expected to enhance the understanding of microbially induced calcium carbonate precipitation characteristics on solid surfaces such as soil grains and contribute to the optimization of MICP applications.
基金supported by the National Key R&D Program of China (No. 2018YFA0707300)the National Natural Science Foundation of China (No. 52374376)the Introduction Plan for High end Foreign Experts, China (No. G2023105001L)。
文摘Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.
基金supported by the National Natural Science Foundation of China (No. 52374292)China Baowu Low Carbon Metallurgy Innovation Foundation, China (No. BWLCF202309)the Natural Science Foundation of Changsha City, China (No. KQ2208271)。
文摘Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.
基金supported by Zhejiang Provincial Natural Science Foundation of China(No.LR23C160001)Scientific Research Startup Foundation of Zhejiang Ocean University(No.11034150220006).
文摘The utilization of solar-driven interfacial evaporation technology is highly important in addressing the energy crisis and water scarcity,primarily because of its affordability and minimal energy usage.Enhancing the performance of solar energy evaporation and minimizing material degradation during application can be achieved through the design of novel photothermal materials.In solar interfacial evaporation,photothermal materials exhibit a wide range of additional characteristics,but a systematic overview is lacking.This paper encompasses an examination of various categories and principles pertaining to photothermal materials,as well as the structural design considerations for salt-resistant materials.Additionally,we discuss the versatile uses of this appealing technology in different sectors related to energy and the environment.Furthermore,potential solutions to enhance the durability of photothermal materials are also highlighted,such as the rational design of micro/nano-structures,the use of adhesives,the addition of anti-corrosion coatings,and the preparation of self-healing surfaces.The objective of this review is to offer a viable resolution for the logical creation of high-performance photothermal substances,presenting a guide for the forthcoming advancement of solar evaporation technology.
文摘Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare sub-nanometric Pt clusters(~0.8 nm)encapsulated within the defects of CeO_(2)nanorods via an in-situ defect engineering methodology.The as-prepared Pt@d-CeO_(2)catalyst significantly boosts the activity and stability in the water-gas shift(WGS)reaction compared to other analogs.Based on controlled experiments and complementary(in-situ)spectroscopic studies,a reversible encapsulation induced by active site transformation between the Pt^(2+)-terminal hydroxyl and Pt^(δ+)-O vacancy species at the interface is revealed,which enables to evoke the enhanced performance.Our findings not only offer practical guidance for the design of high-efficiency catalysts but also bring a new understanding of the exceptional performance of WGS in a holistic view,which shows a great application potential in materials and catalysis.
基金supported Major Science and Technology Innovation Project of Shandong Province(2023CXGC010707)Natural Science Foundation of Shandong Province(Grant No.ZR2022MC172 and ZR2024MC114)+1 种基金Shandong Province Rural Revitalization Science and Technology Innovation Enhancement Action Plan(Grant No.2023TZXD043 and 2023TZXD069)Scientific Research Foundation for High-Level Talents of Qingdao Agricultural University(663/1120085 and 663/1120084).
文摘Oil bodies(OBs)are the lipid-storage organelle in oilseed,and their interface properties are crucial for oilseed processing.To elucidate the effect of interfacial proteins on the functional properties of high-oleic and normal peanut OBs,OBs were extracted using ultrasound-assisted aqueous enzymatic extraction(AEE),and the effects of ultrasonic power(100–500 W)and extraction time(0–30 min)on the interface properties were investigated.These results indicate that the interfacial protein content and interface properties of OBs can be significantly affected by ultrasonic treatment.The interfacial protein content of high-oleic peanut OBs increased from 88.25%to 91.95%after ultrasonic treatment,which was 1.4 times that of normal peanuts OBs.The emulsifying activity index(EAI)and emulsion stability index(ESI)values of both peanut OBs increased with the increase in ultrasonic power and extraction time.These results suggest that the emulsification ability of OBs may be closely related to the interfacial protein content and therefore can be regulated by altering the interfacial protein content using ultrasonic treatment.However,the particle size of OBs tends to increase under low ultrasonic power(0–200 W)owing to the increase in the interfacial protein content and aggregation effects,whereas it decreases under high ultrasonic power(300 W–500 W)due to cavitation effects.This pattern of change in particle size was also confirmed by confocal laser scanning microscopy,which indicated that high ultrasonic power suppressed the contribution of the interfacial protein content to the particle size,but still improved the emulsification ability of the OBs by reducing the particle size and increasing the interfacial tension.Therefore,regulating the interfacial protein content of peanut OBs by adjusting ultrasonic power is a promising way to improve their functional properties.
基金Project supported by the Natural Science Foundation of Jiangsu Province(Grant Nos.BK20231529 and BK20233001)the National Key Research and Development Program of China(Grant No.2024YFA1409100)+2 种基金the Fundamental Research Funds for the Central Universities(Grant No.0204-14380233)the National Natural Science Foundation of China(Grant Nos.12474170 and 123B2059)the National Postdoctoral Program for Innovative Talents(Grant No.BX20240160)。
文摘Interfacial ferroelectricity is a recently established mechanism for generating spontaneous reversible electric polarization,arising from the charge transfer between stacked van der Waals layered atomic crystals.It has been realized in both naturally formed multilayer crystals and moirésuperlattices.Owing to the large number of material choices and combinations,this approach is highly versatile,greatly expanding the scope of ultrathin ferroelectrics.A key advantage of interfacial ferroelectricity is its potential to couple with preexisting properties of the constituent layers,enabling their electrical manipulation through ferroelectric switching and paving the way for advanced device functionalities.This review article summarizes recent experimental progress in interfacial ferroelectricity,with an emphasis on its coupling with a variety of electronic properties.After introducing the underlying mechanism of interfacial ferroelectricity and the range of material systems discovered to date,we highlight selected examples showcasing ferroelectric control of excitonic optical properties,Berry curvature effects,and superconductivity.We also discuss the challenges and opportunities that await further studies in this field.
基金the National Key Research and Development Program of China(Grant No.2022YFC3901902)the National Natural Science Foundation of China(Grant Nos.52203037,52103031,and 52073107)。
文摘Fiber fabrics have been wildly utilized for solar interracial evaporators to address freshwater scarcity.However,the complex and expensive manufacturing processes remain limited to their scalable development.Herein,a fabric-based Janus interracial evaporator is efficiently fabricated on a large scale by integrating an extremely innovative self-designed melt-centrifugal spinning technology with spray coating technology.The prepared fabric-based Janus interfacial evaporator has differential hydrophilicity,uneven surfaces,and channels that allow moisture escape.Benefiting from the excellent photothermai conversion of graphene oxide and the charge transfer actions of titanium dioxide,such a multifunction evaporator can reach a high evaporation rate of 1.72 kg m^(-2)h^(-1)under 1 sun irradiation,a superior antibacterial rate of 99%,excellent photocatalytic degradation,and effective thermoelectric ability simultaneously.Moreover,it also shows fantastic performance in salt resistance,recyclable evaporation,and real desalination,This work demonstrates a high-efficiency,cost-effective,multifunctional,and scalable strategy for high-performance fiber fabrics solar interfacial evaporation.
基金supported by the National Natural Science Foundation of China(Grant No.22005275).
文摘Surface engineering plays a crucial role in improving the performance of high energy materials,and polydopamine(PDA)is widely used in the field of energetic materials for surface modification and functionalization.In order to obtain high-quality HMX@PDA-based PBX explosives with high sphericity and a narrow particle size distribution,composite microspheres were prepared using co-axial droplet microfluidic technology.The formation mechanism,thermal behavior,mechanical sensitivity,electrostatic spark sensitivity,compressive strength,and combustion performance of the microspheres were investigated.The results show that PDA can effectively enhance the interfacial interaction between the explosive particles and the binder under the synergistic effect of chemical bonds and the physical"mechanical interlocking"structure.Interface reinforcement causes the thermal decomposition temperature of the sample microspheres to move to a higher temperature,with the sensitivity to impact,friction,and electrostatic sparks(for S-1)increasing by 12.5%,31.3%,and 81.5%respectively,and the compressive strength also increased by 30.7%,effectively enhancing the safety performance of the microspheres.Therefore,this study provides an effective and universal strategy for preparing high-quality functional explosives,and also provides some reference for the safe use of energetic materials in practical applications.
