Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography...Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography and microelectrode arrays.The challenges of these mentioned approaches are characterized by the bandwidth of the spatiotemporal resolution,which in turn is essential for large-area neuron recordings(Abiri et al.,2019).展开更多
Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread applica...Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread application.In this study,hemin was employed as a multi-functional artificial interface for the first time to inhibit the disordered growth of zinc dendrites and mitigate side reactions.Theoretical calculations indicate that hemin is preferentially adsorbed onto the zinc anode,thus blocking the interaction between the active zinc anode and electrolyte.Compared with zinc foil,the Hemin@Zn anode demonstrates enhanced corrosion resistance,a decrease in hydrogen evolution,and more orderly deposition of zinc.As expected,the symmetric cell with Hemin@Zn anode can sustain up to 4000 h at 0.2 mA/cm^(2),0.2 mAh/cm^(2).Asymmetric Zn//Cu cells exhibit an average coulombic efficiency exceeding 99.72 % during 500 cycles.Moreover,the full cell Hemin@Zn//NH_(4)V_(4)O_(10) delivers a superior capacity up to 367 m Ah/g and the discharge capacity retention reaches 124 mAh/g after 1200 cycles even at a current density of 5 A/g.This work provides a simple and effective method for constructing a robust artificial interface to promote the application of long-life AZIBs.展开更多
Preferential magnesium(Mg)electrodeposition on separators is a ubiquitous yet poorly understood phenomenon in rechargeable Mg-metal batteries,posing a fundamental challenge to their development.In this work,the synerg...Preferential magnesium(Mg)electrodeposition on separators is a ubiquitous yet poorly understood phenomenon in rechargeable Mg-metal batteries,posing a fundamental challenge to their development.In this work,the synergy effects of interface-accelerating desolvation and spatial confinement have been demonstrated as the essential causation of this counterintuitive experimental phenomenon.At the molecular level,the imide ring(-CO-NR-CO-,in which R represents the phenyl)groups in an artificially introduced polyimide(PI)interlayer facilitate the strong electrostatic affinity towards Mg^(2+),which accelerates the desolvation process for Mg^(2+)solvation structures at the inner Helmholtz plane.At the nucleation scale,the wedge-like concave geometry formed at the PI/current collector interface provides energetically favorable sites for Mg nucleation.This unique architecture reduces the critical nucleus size,thereby significantly lowering nucleation energy barriers.As a result,the satisfactory Coulombic efficiency for Mg plating/stripping(98.22%)and cycle lifespan(1200 cycles,above 100 days)have been achieved,outperforming most of the previous results.This work pioneers a molecular-level understanding of separator-directed Mg deposition and resolves a long-standing confusion in Mg-metal batteries.展开更多
Received 7 August 2024;received in revised form 13 November 2024;accepted 18 November 2024 Available online 30 November 2024 Abstract The poor fracture toughness limits the widespread application of high-strength cast...Received 7 August 2024;received in revised form 13 November 2024;accepted 18 November 2024 Available online 30 November 2024 Abstract The poor fracture toughness limits the widespread application of high-strength cast Mg-Re-Zn alloys.Regulating the alloy microstructure,with phases such asα-Mg,blocky LPSO(long-period stacking order),and lamellar LPSO,offers various possibilities to enhance ductility by casting and heat treatment.This study categorizes different interface types concerning crack initiation,propagation,and ultimate fracture toughness.It distinctly presents the results of interface modulation related to alloy composition and heat treatment,elucidating the influence on crack initiation and propagation paths.Consequently,it proposes structural configurations rule and relevant heat treatment processes that can optimize and improve alloy fracture toughness.Blocky LPSO should have appropriate dispersion and size while avoiding lamellar LPSO.展开更多
The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerge...The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerged as a promising solution for effectively degrading refractory organic pollutants in water under light conditions.This review delves into the advancements made in the field,focusing on strategies to enhance the generation of active species by modulating the micro-interface of the photoanode.Strategies,such as morphological control,element doping,introduction of surface oxygen vacancies,and construction of heterostructures,significantly improve the separation efficiency of photogenerated charges and the generation of active species,thereby boosting the efficiency of photoelectrocatalytic performance.Furthermore,the review explores the potential applications of photoelectrocatalytic technology in organic pollutant degradation in solutions.It also outlines the current challenges and future development directions.Despite its remarkable laboratory success,practical implementation of photoelectrocatalytic technology encounters obstacles related to stability,cost-effectiveness,and operational efficiency.Future investigations need to focus on optimizing the performance of photoelectrocatalytic materials and exploring strategies for upscaling their application in real water treatment scenarios.展开更多
In the realm of large-scale power system energy storage,sodium-based batteries represent a cost-effective post-lithium energy storage technology,making inorganic solid-state sodium batteries(ISSSB)a critical branch of...In the realm of large-scale power system energy storage,sodium-based batteries represent a cost-effective post-lithium energy storage technology,making inorganic solid-state sodium batteries(ISSSB)a critical branch of this development.Inorganic solid-state electrolytes(ISSEs)are the core components of sodium batteries;however,they face significant challenges such as insufficient ionic conductivity,interfacial instability,and dendrite growth,all of which severely hinder practical application.This review critically assesses experimental protocols and theoretical frameworks related to mainstream ISSEs and systematizes optimization strategies aimed at overcoming these challenges.Leveraging integrated insights from both experimental and computational studies,the review first categorizes and summarizes the primary types of ISSEs,namely oxide-,sulfide-,and halide-based electrolytes.It then details interfacial optimization strategies focused on addressing three core interfacial issues:ion transport barriers resulting from mechanical incompatibility,side reactions stemming from electrochemical mismatch,and dendrite formation.Finally,the review advocates prioritizing in-depth research that integrates experimental and theoretical approaches to establish a closed-loop methodology encompassing predictive design,multiscale investigation,mechanistic exploration,and high-throughput automated experimentation,with feedback-driven refinement.This work serves as a comprehensive reference and systematic roadmap for future research on solid-state electrolytes(SSEs).展开更多
Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction...Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.展开更多
Stability of base-exposed backfill roof in underhand drift-and-fill mining is crucial for the safety of those working beneath.Given the commonly used primary-and-secondary mining sequence,interfaces are formed between...Stability of base-exposed backfill roof in underhand drift-and-fill mining is crucial for the safety of those working beneath.Given the commonly used primary-and-secondary mining sequence,interfaces are formed between adjacent filled drifts,which can weaken the integrity of the backfill roof.These interfaces also lead to two common drift layouts:aligned drifts and staggered drifts.However,less attention has been paid to the interfaces and the two drift layouts were not adequately distinguished in previous studies.In this paper,the interfaces between filled drifts were firstly considered to investigate the stability of backfill roof.Failure modes and strength requirements of backfill roof in aligned and staggered drifts are comprehensively investigated by FLAC3D,with a focus on considerations of varied shear parameters of the interfaces.Results show that failure modes in aligned drifts transition from block sliding to top caving,bottom caving or sloughing as the interface cohesion increases from zero to at least half of the backfill cohesion.Further increases in interface cohesion allow aligned drifts to behave as if there are no interfaces between them.The critical stability conditions of backfill roof in aligned drifts were mostly determined by the interface strength instead of the backfill strength.However,the stability of backfill roof in staggered drifts is barely affected by the interface strength.The outcomes are expected to provide references for mining engineers to optimize drift layouts and perform cost-effective backfill roof strength design at mines using underhand drift-and-fill mining method.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
The development of robust anode-electrolyte interfaces(AEI)with enhanced compatibility and mechanical strength is critical for regulating zinc-ion nucleation kinetics,suppressing dendrite formation,and advancing zinc-...The development of robust anode-electrolyte interfaces(AEI)with enhanced compatibility and mechanical strength is critical for regulating zinc-ion nucleation kinetics,suppressing dendrite formation,and advancing zinc-ion battery commercialization.To address persistent interface degradation during battery cycling,we propose a novel manufacturing strategy utilizing digital-light-processing(DLP)3D printing.This approach enables programmable regulation of gel-polymer electrolyte(GPE)structures through layer-by-layer photopolymerization,achieving precision regulation of macro-microstructures and interfacial stresses.The DLP-manufactured GPEs feature cross-scale structures combining dense porous networks with smooth surface topography,providing abundant electrochemical active sites and stable interfacial contact.Multiphase-field simulations integrated with in-situ/ex-situ characterizations reveal stress-enhanced zinc deposition mechanisms,where optimized interfacial stress eliminates AEI contact instability,ensuring rapid mass transfer between electrode and electrolyte.Under regulated interface stress,the symmetrical cell demonstrates stability exceeding 2000 hours,and the full cell retains 91.72%capacity after 8000 ultralong cycles,with reliable operation under extreme temperature conditions(-10℃/60℃).The precise regulation of interfacial stresses establishes stable AEI configurations,demonstrating a transformative approach to durable zinc-ion battery design.展开更多
The osteochondral(OC)interface exhibits a mineral gradient,varying in thickness by several hundred micrometers across different species.Disruptions in this interface damage OC tissues,leading to osteoarthritis.The nat...The osteochondral(OC)interface exhibits a mineral gradient,varying in thickness by several hundred micrometers across different species.Disruptions in this interface damage OC tissues,leading to osteoarthritis.The natural architecture and composition of native OC interfaces can be replicated using biomaterial scaffolds via regenerative engineering approaches.A novel one-step bioextrusion process was employed to fabricate a unitary synthetic graft(USG),which mimics the native OC interface’s mineral concentration gradient.This novel USG is composed of an agarose-based cartilage layer and a bone layer,consisting of agarose enriched with 20%(200 g/L)hydroxyapatite.The USG features a gradient interface with mineral concentrations transitioning from 0%to 20%(mass fraction),mimicking the transition between the cartilage and bone.Thermogravimetric analysis revealed that the gradient transition lengths of the graft and native OC tissue harvested from bovine knees were similar((647±21)vs.(633±124)μm).The linear viscoelastic properties of the grafts,which were evaluated using strain sweep and frequency sweep tests with oscillatory shear,indicated a dominant storage modulus over loss modulus similar to that of native OC tissues.The compressive and stress relaxation behaviors of the USGs demonstrated that the graft maintained structural integrity under mechanical stress.Viability assays performed after bioextrusion showed that chondrocytes and human fetal osteoblast cells successfully integrated and survived within their designated regions of the graft.The novel USGs exhibit properties similar to native OC tissue and are promising candidates for regenerating OC defects and restoring knee joint functionality.展开更多
Despite the high energy density,lithium metal batteries(LMBs)face significant cycling instability and safety challenges,especially at subzero temperatures.Herein,we report a rationally designed lowconcentrated electro...Despite the high energy density,lithium metal batteries(LMBs)face significant cycling instability and safety challenges,especially at subzero temperatures.Herein,we report a rationally designed lowconcentrated electrolyte system that employs a low-freezing-point diluent to compress solvation sheaths,enabling the formation of a compact anion-dominated solvation structure that enhances interfacial stability and safety.Molecular dynamics reveal the unique solvation structure with close packing of anions in this low-concentration electrolyte from the micro-mesoscopic scale.The optimized electrolyte combines cost-effectiveness,superior wettability,intrinsic nonflammability,and high stability,concurrently promoting a hybrid organic-inorganic solid electrolyte interphase(SEI)and cathode electrolyte interphase(CEI)for uniform lithium deposition.As a result,the Li‖LiFePO_(4)(LFP)full cells demonstrate stable cycling for 700 cycles at the current density of 4 C.Remarkably,the electrolyte demonstrates exceptional low-temperature performance,indicating broad operational viability.This work provides a promising electrolyte design strategy that addresses both safety and excellent electrochemical performance in high-energy-density metal-based batteries,including but not restricted to Li,Na,K and Zn multivalent ion systems.展开更多
Self-supported nanoarrays have emerged as a promising alternative electrocatalyst for alkaline H_(2)O splitting,owing to their accessible active sites and strongly coupled interfaces with current collectors for improv...Self-supported nanoarrays have emerged as a promising alternative electrocatalyst for alkaline H_(2)O splitting,owing to their accessible active sites and strongly coupled interfaces with current collectors for improved mass transfer and stability.Herein,self-supported crystalline/amorphous NiO/Ni(OH)_(2)nanosheet arrays on nickel foam(NF)are fabricated via an in-situ dissolution-deposition hydrothermal growing of Ni(OH)_(2)nanosheets without additional metal sources assisted by a common Lewis base,EDTA,followed by a rapid calcination at 300℃in air.The as-prepared EDTA-NF-12 h exhibits high OER and HER performance under alkaline conditions,requiring 235 mV and 158 mV,respectively,to reach 10 mA cm^(-2),and the decent performance can be maintained for 24 h without obvious degradation.The dual interfaces,i.e.,the dense crystalline/amorphous interfaces within the NiO/Ni(OH)_(2)nanosheet arrays,as well as the intimate interfaces between nanoarrays and NF,both serve as reaction active sites,facilitate electron transfer,and endow the catalyst with high activity and stability.Furthermore,by applying EDTA-Ni^(2+)and other Lewis bases with varying basicities instead of EDTA,the interfaces with the NF substrate are found to promote the formation of crystalline/amorphous interfaces within the nanosheets.This study offers appealing opportunities for tailoring the electrocatalytic performance of self-supported electrodes via dual interface engineering.展开更多
The interfacial structure and its regulation play a crucial role in determining the overall performance of advanced functional composites.Weak interfacial interactions between carbon fibers and the matrix present a cr...The interfacial structure and its regulation play a crucial role in determining the overall performance of advanced functional composites.Weak interfacial interactions between carbon fibers and the matrix present a critical challenge limiting the general performance and functional applications of carbon fiberreinforced composites.In this paper,a novel strategy for bioinspired root-soil interfacial structure was presented to enhance the mechanical properties of polymer bonded explosives.A multiscale nanowire heterostructure was constructed through the in-situ growth of morphologically controllable zinc oxide nanowires on the carbon fiber surface via a facile hydrothermal method,with polydopamine as the interfacial reinforcement layer.This structure emulated the function of the"root",and combined with a network-distributed polymer binder representing the"soil",formed a robust root-soil interlocking interfacial structure within the polymer bonded explosives.Due to the multiscale interfacial reinforcement structure,the tensile strength of the polymer bonded explosives was visibly increased by 41%,the strain at the break by 110%,and the creep resistance by 51%with only 0.4 wt%filler adopted.The thermal stress resistance was improved by 57%owing to the synergistic enhancement of thermal conductivity and mechanical properties.This study provides new perspectives and insights for designing and constructing high-performance polymer bonded explosives and other functional composites.展开更多
High-performance alloys are indispensable in modern engineering because of their exceptional strength,ductility,corrosion resistance,fatigue resistance,and thermal stability,which are all significantly influenced by t...High-performance alloys are indispensable in modern engineering because of their exceptional strength,ductility,corrosion resistance,fatigue resistance,and thermal stability,which are all significantly influenced by the alloy interface structures.Despite substantial efforts,a comprehensive overview of interface engineering of high-performance alloys has not been presented so far.In this study,the interfaces in high-performance alloys,particularly grain and phase boundaries,were systematically examined,with emphasis on their crystallographic characteristics and chemical element segregations.The effects of the interfaces on the electrical conductivity,mechanical strength,toughness,hydrogen embrittlement resistance,and thermal stability of the alloys were elucidated.Moreover,correlations among various types of interfaces and advanced experimental and computational techniques were examined using big data analytics,enabling robust design strategies.Challenges currently faced in the field of interface engineering and emerging opportunities in the field are also discussed.The study results would guide the development of next-generation high-performance alloys.展开更多
Purpose-Interface management is the process of managing communications,responsibilities and coordination of project parties,phases or physical entities which are dependent on one another.Interface management is a cruc...Purpose-Interface management is the process of managing communications,responsibilities and coordination of project parties,phases or physical entities which are dependent on one another.Interface management is a crucial part of managing any construction project-but particularly important for high-speed railway projects that often have several contractual parties and stakeholders,very long project timelines and huge upfront cost overlays.This paper discusses how various project interfaces were managed during the design and construction of the civil engineering infrastructure for the High Speed Two(HS2)project in the United Kingdom.Design/methodology/approach-The paper uses the case study methodology.Key interfaces on the HS2 project are grouped into various categories and the paper discusses how they were managed within the Area North Integrated Project Team(IPT)of the HS2 project made up of contractor Balfour Beatty VINCI(BBV),the Mott MacDonald SYSTRA Design Joint Venture(DJV)and client HS2 Ltd.3 different case studies drawn from across the IPT are used,each of them highlighting different interfaces and how these interfaces were managed.Findings-The paper shows how innovative technical designs and modern methods of construction were used to address some of the unique and peculiar challenges of designing a brand-new railway in the United Kingdom.Addressing the contrasting and often competing requirements of different stakeholders,coupled with challenging physical constraints of the very limited land available for the project and the use of a rarely used Act of Parliament in the delivery of the project required different approach to interface management.Collaboration and proactive stakeholder engagement are necessary for successful interface management on megaprojects.The authors posit that adopting an integrated approach to engineering and construction management is an essential ingredient for the successful delivery of high-speed railway projects.Originality/value-With many high-speed railway projects around the world coming up in the next few years,understanding the context and challenges for each country will help engineering and design managers adopt appropriate approaches for their projects.The lessons learned on the HS2 project are also transferable to other mega infrastructure projects with complex project interfaces.展开更多
Parasitic interface side reactions and uncontrollable Zn deposition seriously erode the cycling performance of aqueous zinc ion batteries,thus impeding the large-scale application.Herein,an organic acid molecule with ...Parasitic interface side reactions and uncontrollable Zn deposition seriously erode the cycling performance of aqueous zinc ion batteries,thus impeding the large-scale application.Herein,an organic acid molecule with a unique molecular structure,camphorsulfonic acid(CSA),is first proposed to remodel the interface microenvironment as an electrolyte additive.The proton provided by CSA can neutralize the hydroxide ions generated by side reactions and inhibit the accumulation of alkaline by-products.The sulfonic acid groups are firmly adsorbed on the Zn anode surface,thereby enabling the regulation of interfacial species.Specifically,oxygen-containing functional groups combined with hydrophobic rigid carbon rings achieve a water-poor interface environment and promote the transfer of Zn^(2+),providing a suitable environment for Zn deposition.As a result,Zn//Zn symmetrical battery can run for over 2800 h(2 mA cm^(-2)-2 mAh cm^(-2)),demonstrating 28-times lifespan compared to the battery without CSA.Furthermore,Zn//KVO full cell presents excellent performance of 800 cycles at 3 A g^(-1).Besides,the pouch cell with CSA can also operate a capacity of 153.8 mAh after 60 cycles at 0.5 A g^(-1) with96.5%capacity retention rate.This work provides an organism-inspired additive selection for stabilizing the interface chemistry of the Zn anode.展开更多
Aqueous zinc(Zn)metal batteries(AZMBs)have distinct advantages in terms of safety and cost-effectiveness.However,the industrial application of AZMBs is currently not ready due to challenges of Zn dendrite growth and t...Aqueous zinc(Zn)metal batteries(AZMBs)have distinct advantages in terms of safety and cost-effectiveness.However,the industrial application of AZMBs is currently not ready due to challenges of Zn dendrite growth and the side reactions such as hydrogen evolution reaction(HER)on the Zn anodes.In this review,we discuss how inorganic interfaces impact the Zn^(2+)plating/stripping reaction and overall cell performance.The discussion is categorized based on the types of inorganic materials,including metal oxides,other metal compounds,and inorganic salts.The proposed protection mechanisms for Zn metal anodes are highlighted,with a focus on the dendrite and HER inhibition mechanisms facilitated by various inorganic materials.We also provide our perspective on the rational design of advanced interfaces to enable highly reversible Zn^(2+)plating/stripping reactions toward highly stable AZMBs,paving the way for their practical implementation in energy storage.展开更多
文摘Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography and microelectrode arrays.The challenges of these mentioned approaches are characterized by the bandwidth of the spatiotemporal resolution,which in turn is essential for large-area neuron recordings(Abiri et al.,2019).
基金financially supported by the National Natural Science Foundation of China (No.52372188)Natural Science Foundation of Henan (Nos.242300421625,252300421333)+4 种基金CAS Henan Industrial Technology Innovation & Incubation Center (No.2024121)Key Scientific Research Project of Education Department of Henan Province (Nos.22A150042,23A150038,and 24A150019)2023 Introduction of studying abroad talent programthe China Postdoctoral Science Foundation (No.2019 M652546)Key Project of Science and Technology of Henan Province (No.252102240007)。
文摘Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread application.In this study,hemin was employed as a multi-functional artificial interface for the first time to inhibit the disordered growth of zinc dendrites and mitigate side reactions.Theoretical calculations indicate that hemin is preferentially adsorbed onto the zinc anode,thus blocking the interaction between the active zinc anode and electrolyte.Compared with zinc foil,the Hemin@Zn anode demonstrates enhanced corrosion resistance,a decrease in hydrogen evolution,and more orderly deposition of zinc.As expected,the symmetric cell with Hemin@Zn anode can sustain up to 4000 h at 0.2 mA/cm^(2),0.2 mAh/cm^(2).Asymmetric Zn//Cu cells exhibit an average coulombic efficiency exceeding 99.72 % during 500 cycles.Moreover,the full cell Hemin@Zn//NH_(4)V_(4)O_(10) delivers a superior capacity up to 367 m Ah/g and the discharge capacity retention reaches 124 mAh/g after 1200 cycles even at a current density of 5 A/g.This work provides a simple and effective method for constructing a robust artificial interface to promote the application of long-life AZIBs.
基金supported by the National Natural Science Foundation of China(22279068,52374306)the Taishan Scholars of Shandong Province(tsqn202408202)the Qingdao New Energy Shandong Laboratory Open Project(QNESL OP202312)。
文摘Preferential magnesium(Mg)electrodeposition on separators is a ubiquitous yet poorly understood phenomenon in rechargeable Mg-metal batteries,posing a fundamental challenge to their development.In this work,the synergy effects of interface-accelerating desolvation and spatial confinement have been demonstrated as the essential causation of this counterintuitive experimental phenomenon.At the molecular level,the imide ring(-CO-NR-CO-,in which R represents the phenyl)groups in an artificially introduced polyimide(PI)interlayer facilitate the strong electrostatic affinity towards Mg^(2+),which accelerates the desolvation process for Mg^(2+)solvation structures at the inner Helmholtz plane.At the nucleation scale,the wedge-like concave geometry formed at the PI/current collector interface provides energetically favorable sites for Mg nucleation.This unique architecture reduces the critical nucleus size,thereby significantly lowering nucleation energy barriers.As a result,the satisfactory Coulombic efficiency for Mg plating/stripping(98.22%)and cycle lifespan(1200 cycles,above 100 days)have been achieved,outperforming most of the previous results.This work pioneers a molecular-level understanding of separator-directed Mg deposition and resolves a long-standing confusion in Mg-metal batteries.
基金supports from the National Key Research and Development Plan(Grant No.2021YFB3701100)the National Natural Science Foundation of China(Grant No.U2241231,No.52071206).
文摘Received 7 August 2024;received in revised form 13 November 2024;accepted 18 November 2024 Available online 30 November 2024 Abstract The poor fracture toughness limits the widespread application of high-strength cast Mg-Re-Zn alloys.Regulating the alloy microstructure,with phases such asα-Mg,blocky LPSO(long-period stacking order),and lamellar LPSO,offers various possibilities to enhance ductility by casting and heat treatment.This study categorizes different interface types concerning crack initiation,propagation,and ultimate fracture toughness.It distinctly presents the results of interface modulation related to alloy composition and heat treatment,elucidating the influence on crack initiation and propagation paths.Consequently,it proposes structural configurations rule and relevant heat treatment processes that can optimize and improve alloy fracture toughness.Blocky LPSO should have appropriate dispersion and size while avoiding lamellar LPSO.
基金financially supported by the National Natural Science Foundation of China (No.52100076)the Fundamental Research Funds for the Central Universities (No.2023MS064)。
文摘The escalating global issues of water scarcity and pollution emphasize the critical need for the rapid development of efficient and eco-friendly water treatment technologies.Photoelectrocatalytic technology has emerged as a promising solution for effectively degrading refractory organic pollutants in water under light conditions.This review delves into the advancements made in the field,focusing on strategies to enhance the generation of active species by modulating the micro-interface of the photoanode.Strategies,such as morphological control,element doping,introduction of surface oxygen vacancies,and construction of heterostructures,significantly improve the separation efficiency of photogenerated charges and the generation of active species,thereby boosting the efficiency of photoelectrocatalytic performance.Furthermore,the review explores the potential applications of photoelectrocatalytic technology in organic pollutant degradation in solutions.It also outlines the current challenges and future development directions.Despite its remarkable laboratory success,practical implementation of photoelectrocatalytic technology encounters obstacles related to stability,cost-effectiveness,and operational efficiency.Future investigations need to focus on optimizing the performance of photoelectrocatalytic materials and exploring strategies for upscaling their application in real water treatment scenarios.
基金the National Natural Science Foundation of China (52076076, 52006065)Fundamental Research Funds for Central Universities (2025JC003)Beijing Municipal Natural Science Foundation (3242022)
文摘In the realm of large-scale power system energy storage,sodium-based batteries represent a cost-effective post-lithium energy storage technology,making inorganic solid-state sodium batteries(ISSSB)a critical branch of this development.Inorganic solid-state electrolytes(ISSEs)are the core components of sodium batteries;however,they face significant challenges such as insufficient ionic conductivity,interfacial instability,and dendrite growth,all of which severely hinder practical application.This review critically assesses experimental protocols and theoretical frameworks related to mainstream ISSEs and systematizes optimization strategies aimed at overcoming these challenges.Leveraging integrated insights from both experimental and computational studies,the review first categorizes and summarizes the primary types of ISSEs,namely oxide-,sulfide-,and halide-based electrolytes.It then details interfacial optimization strategies focused on addressing three core interfacial issues:ion transport barriers resulting from mechanical incompatibility,side reactions stemming from electrochemical mismatch,and dendrite formation.Finally,the review advocates prioritizing in-depth research that integrates experimental and theoretical approaches to establish a closed-loop methodology encompassing predictive design,multiscale investigation,mechanistic exploration,and high-throughput automated experimentation,with feedback-driven refinement.This work serves as a comprehensive reference and systematic roadmap for future research on solid-state electrolytes(SSEs).
基金funded by the National Natural Science Foundation of China(Nos.52209130 and 52379100)Shandong Provincial Natural Science Foundation(No.ZR2024ME112).
文摘Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.
基金supported by Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(Grant No.2024ZD1003705)the Beijing Nova Program(Grant No.20220484057)support from China Scholarship Council under Grant CSC No.202110300001.
文摘Stability of base-exposed backfill roof in underhand drift-and-fill mining is crucial for the safety of those working beneath.Given the commonly used primary-and-secondary mining sequence,interfaces are formed between adjacent filled drifts,which can weaken the integrity of the backfill roof.These interfaces also lead to two common drift layouts:aligned drifts and staggered drifts.However,less attention has been paid to the interfaces and the two drift layouts were not adequately distinguished in previous studies.In this paper,the interfaces between filled drifts were firstly considered to investigate the stability of backfill roof.Failure modes and strength requirements of backfill roof in aligned and staggered drifts are comprehensively investigated by FLAC3D,with a focus on considerations of varied shear parameters of the interfaces.Results show that failure modes in aligned drifts transition from block sliding to top caving,bottom caving or sloughing as the interface cohesion increases from zero to at least half of the backfill cohesion.Further increases in interface cohesion allow aligned drifts to behave as if there are no interfaces between them.The critical stability conditions of backfill roof in aligned drifts were mostly determined by the interface strength instead of the backfill strength.However,the stability of backfill roof in staggered drifts is barely affected by the interface strength.The outcomes are expected to provide references for mining engineers to optimize drift layouts and perform cost-effective backfill roof strength design at mines using underhand drift-and-fill mining method.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金financially supported by the National Nature Science Foundation of China (62504130)National Key Research and Development Program of China (2018YFB0704100)+3 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong (Y01256331)the Technology Development Project of Henan Province (252102240047)the Pico Center at SUSTech CRF which receives support from the Presidential FundDevelopment and Reform Commission of Shenzhen Municipality
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金supported by National Natural Science Foundation of China(U22A20193)National Key Research and Development Program of China(2024YFB3409000)+1 种基金TCL science and technology innovation fund(20231751)Fundamental Research Funds for the Central Universities(No.2024ZYGXZR066)。
文摘The development of robust anode-electrolyte interfaces(AEI)with enhanced compatibility and mechanical strength is critical for regulating zinc-ion nucleation kinetics,suppressing dendrite formation,and advancing zinc-ion battery commercialization.To address persistent interface degradation during battery cycling,we propose a novel manufacturing strategy utilizing digital-light-processing(DLP)3D printing.This approach enables programmable regulation of gel-polymer electrolyte(GPE)structures through layer-by-layer photopolymerization,achieving precision regulation of macro-microstructures and interfacial stresses.The DLP-manufactured GPEs feature cross-scale structures combining dense porous networks with smooth surface topography,providing abundant electrochemical active sites and stable interfacial contact.Multiphase-field simulations integrated with in-situ/ex-situ characterizations reveal stress-enhanced zinc deposition mechanisms,where optimized interfacial stress eliminates AEI contact instability,ensuring rapid mass transfer between electrode and electrolyte.Under regulated interface stress,the symmetrical cell demonstrates stability exceeding 2000 hours,and the full cell retains 91.72%capacity after 8000 ultralong cycles,with reliable operation under extreme temperature conditions(-10℃/60℃).The precise regulation of interfacial stresses establishes stable AEI configurations,demonstrating a transformative approach to durable zinc-ion battery design.
基金supported by the School of Engineering and Digital Sciences of Nazarbayev University,Astana,Kazakhstan(to CE)。
文摘The osteochondral(OC)interface exhibits a mineral gradient,varying in thickness by several hundred micrometers across different species.Disruptions in this interface damage OC tissues,leading to osteoarthritis.The natural architecture and composition of native OC interfaces can be replicated using biomaterial scaffolds via regenerative engineering approaches.A novel one-step bioextrusion process was employed to fabricate a unitary synthetic graft(USG),which mimics the native OC interface’s mineral concentration gradient.This novel USG is composed of an agarose-based cartilage layer and a bone layer,consisting of agarose enriched with 20%(200 g/L)hydroxyapatite.The USG features a gradient interface with mineral concentrations transitioning from 0%to 20%(mass fraction),mimicking the transition between the cartilage and bone.Thermogravimetric analysis revealed that the gradient transition lengths of the graft and native OC tissue harvested from bovine knees were similar((647±21)vs.(633±124)μm).The linear viscoelastic properties of the grafts,which were evaluated using strain sweep and frequency sweep tests with oscillatory shear,indicated a dominant storage modulus over loss modulus similar to that of native OC tissues.The compressive and stress relaxation behaviors of the USGs demonstrated that the graft maintained structural integrity under mechanical stress.Viability assays performed after bioextrusion showed that chondrocytes and human fetal osteoblast cells successfully integrated and survived within their designated regions of the graft.The novel USGs exhibit properties similar to native OC tissue and are promising candidates for regenerating OC defects and restoring knee joint functionality.
基金supported by the National Natural Science Foundation of China(No.52472219,62133007)the project ZR2024ME073 supported by Shandong Provincial Natural Science Foundationthe Shenzhen Fundamental Research Program(No.JCYJ20220530141017039)。
文摘Despite the high energy density,lithium metal batteries(LMBs)face significant cycling instability and safety challenges,especially at subzero temperatures.Herein,we report a rationally designed lowconcentrated electrolyte system that employs a low-freezing-point diluent to compress solvation sheaths,enabling the formation of a compact anion-dominated solvation structure that enhances interfacial stability and safety.Molecular dynamics reveal the unique solvation structure with close packing of anions in this low-concentration electrolyte from the micro-mesoscopic scale.The optimized electrolyte combines cost-effectiveness,superior wettability,intrinsic nonflammability,and high stability,concurrently promoting a hybrid organic-inorganic solid electrolyte interphase(SEI)and cathode electrolyte interphase(CEI)for uniform lithium deposition.As a result,the Li‖LiFePO_(4)(LFP)full cells demonstrate stable cycling for 700 cycles at the current density of 4 C.Remarkably,the electrolyte demonstrates exceptional low-temperature performance,indicating broad operational viability.This work provides a promising electrolyte design strategy that addresses both safety and excellent electrochemical performance in high-energy-density metal-based batteries,including but not restricted to Li,Na,K and Zn multivalent ion systems.
基金the foundation of Guangdong Engineering Technology Research Center for Hydrogen Energy and Fuel Cells,the Guangdong Provincial Department of Education Innovation Project(No.2022KQNCX056)the Guangdong Basic and Applied Basic Research Foundation(Nos.2022A1515110354 and 2021A1515110582)。
文摘Self-supported nanoarrays have emerged as a promising alternative electrocatalyst for alkaline H_(2)O splitting,owing to their accessible active sites and strongly coupled interfaces with current collectors for improved mass transfer and stability.Herein,self-supported crystalline/amorphous NiO/Ni(OH)_(2)nanosheet arrays on nickel foam(NF)are fabricated via an in-situ dissolution-deposition hydrothermal growing of Ni(OH)_(2)nanosheets without additional metal sources assisted by a common Lewis base,EDTA,followed by a rapid calcination at 300℃in air.The as-prepared EDTA-NF-12 h exhibits high OER and HER performance under alkaline conditions,requiring 235 mV and 158 mV,respectively,to reach 10 mA cm^(-2),and the decent performance can be maintained for 24 h without obvious degradation.The dual interfaces,i.e.,the dense crystalline/amorphous interfaces within the NiO/Ni(OH)_(2)nanosheet arrays,as well as the intimate interfaces between nanoarrays and NF,both serve as reaction active sites,facilitate electron transfer,and endow the catalyst with high activity and stability.Furthermore,by applying EDTA-Ni^(2+)and other Lewis bases with varying basicities instead of EDTA,the interfaces with the NF substrate are found to promote the formation of crystalline/amorphous interfaces within the nanosheets.This study offers appealing opportunities for tailoring the electrocatalytic performance of self-supported electrodes via dual interface engineering.
基金supported by the Presidential Foundation of CAEP(No.YZJJZQ2022006)the National Natural Science Foundation of China(Nos.22275173 and 22475179).
文摘The interfacial structure and its regulation play a crucial role in determining the overall performance of advanced functional composites.Weak interfacial interactions between carbon fibers and the matrix present a critical challenge limiting the general performance and functional applications of carbon fiberreinforced composites.In this paper,a novel strategy for bioinspired root-soil interfacial structure was presented to enhance the mechanical properties of polymer bonded explosives.A multiscale nanowire heterostructure was constructed through the in-situ growth of morphologically controllable zinc oxide nanowires on the carbon fiber surface via a facile hydrothermal method,with polydopamine as the interfacial reinforcement layer.This structure emulated the function of the"root",and combined with a network-distributed polymer binder representing the"soil",formed a robust root-soil interlocking interfacial structure within the polymer bonded explosives.Due to the multiscale interfacial reinforcement structure,the tensile strength of the polymer bonded explosives was visibly increased by 41%,the strain at the break by 110%,and the creep resistance by 51%with only 0.4 wt%filler adopted.The thermal stress resistance was improved by 57%owing to the synergistic enhancement of thermal conductivity and mechanical properties.This study provides new perspectives and insights for designing and constructing high-performance polymer bonded explosives and other functional composites.
基金supported by the National Natural Science Foundation of China(Nos.52122408 and 52474397)the High-level Talent Research Start-up Project Funding of Henan Academy of Sciences(No.242017127)+1 种基金the financial support from the Fundamental Research Funds for the Central Universities(University of Science and Technology Beijing(USTB),Nos.FRF-TP-2021-04C1 and 06500135)supported by USTB MatCom of Beijing Advanced Innovation Center for Materials Genome Engineering。
文摘High-performance alloys are indispensable in modern engineering because of their exceptional strength,ductility,corrosion resistance,fatigue resistance,and thermal stability,which are all significantly influenced by the alloy interface structures.Despite substantial efforts,a comprehensive overview of interface engineering of high-performance alloys has not been presented so far.In this study,the interfaces in high-performance alloys,particularly grain and phase boundaries,were systematically examined,with emphasis on their crystallographic characteristics and chemical element segregations.The effects of the interfaces on the electrical conductivity,mechanical strength,toughness,hydrogen embrittlement resistance,and thermal stability of the alloys were elucidated.Moreover,correlations among various types of interfaces and advanced experimental and computational techniques were examined using big data analytics,enabling robust design strategies.Challenges currently faced in the field of interface engineering and emerging opportunities in the field are also discussed.The study results would guide the development of next-generation high-performance alloys.
文摘Purpose-Interface management is the process of managing communications,responsibilities and coordination of project parties,phases or physical entities which are dependent on one another.Interface management is a crucial part of managing any construction project-but particularly important for high-speed railway projects that often have several contractual parties and stakeholders,very long project timelines and huge upfront cost overlays.This paper discusses how various project interfaces were managed during the design and construction of the civil engineering infrastructure for the High Speed Two(HS2)project in the United Kingdom.Design/methodology/approach-The paper uses the case study methodology.Key interfaces on the HS2 project are grouped into various categories and the paper discusses how they were managed within the Area North Integrated Project Team(IPT)of the HS2 project made up of contractor Balfour Beatty VINCI(BBV),the Mott MacDonald SYSTRA Design Joint Venture(DJV)and client HS2 Ltd.3 different case studies drawn from across the IPT are used,each of them highlighting different interfaces and how these interfaces were managed.Findings-The paper shows how innovative technical designs and modern methods of construction were used to address some of the unique and peculiar challenges of designing a brand-new railway in the United Kingdom.Addressing the contrasting and often competing requirements of different stakeholders,coupled with challenging physical constraints of the very limited land available for the project and the use of a rarely used Act of Parliament in the delivery of the project required different approach to interface management.Collaboration and proactive stakeholder engagement are necessary for successful interface management on megaprojects.The authors posit that adopting an integrated approach to engineering and construction management is an essential ingredient for the successful delivery of high-speed railway projects.Originality/value-With many high-speed railway projects around the world coming up in the next few years,understanding the context and challenges for each country will help engineering and design managers adopt appropriate approaches for their projects.The lessons learned on the HS2 project are also transferable to other mega infrastructure projects with complex project interfaces.
基金financially supported by The Excellent Youth Project of the Education Department of Hunan Province(No.24B0008)the National Natural Science Foundation of China(No.52377222)。
文摘Parasitic interface side reactions and uncontrollable Zn deposition seriously erode the cycling performance of aqueous zinc ion batteries,thus impeding the large-scale application.Herein,an organic acid molecule with a unique molecular structure,camphorsulfonic acid(CSA),is first proposed to remodel the interface microenvironment as an electrolyte additive.The proton provided by CSA can neutralize the hydroxide ions generated by side reactions and inhibit the accumulation of alkaline by-products.The sulfonic acid groups are firmly adsorbed on the Zn anode surface,thereby enabling the regulation of interfacial species.Specifically,oxygen-containing functional groups combined with hydrophobic rigid carbon rings achieve a water-poor interface environment and promote the transfer of Zn^(2+),providing a suitable environment for Zn deposition.As a result,Zn//Zn symmetrical battery can run for over 2800 h(2 mA cm^(-2)-2 mAh cm^(-2)),demonstrating 28-times lifespan compared to the battery without CSA.Furthermore,Zn//KVO full cell presents excellent performance of 800 cycles at 3 A g^(-1).Besides,the pouch cell with CSA can also operate a capacity of 153.8 mAh after 60 cycles at 0.5 A g^(-1) with96.5%capacity retention rate.This work provides an organism-inspired additive selection for stabilizing the interface chemistry of the Zn anode.
基金supported by the National Natural Science Foundation of China(52272183)the Fundamental Research Funds for the Central Universities(buctrc202316)the support of the China Experience Fund and the Stephen Slavens Faculty Scholar Endowment Fund from Oregon State University。
文摘Aqueous zinc(Zn)metal batteries(AZMBs)have distinct advantages in terms of safety and cost-effectiveness.However,the industrial application of AZMBs is currently not ready due to challenges of Zn dendrite growth and the side reactions such as hydrogen evolution reaction(HER)on the Zn anodes.In this review,we discuss how inorganic interfaces impact the Zn^(2+)plating/stripping reaction and overall cell performance.The discussion is categorized based on the types of inorganic materials,including metal oxides,other metal compounds,and inorganic salts.The proposed protection mechanisms for Zn metal anodes are highlighted,with a focus on the dendrite and HER inhibition mechanisms facilitated by various inorganic materials.We also provide our perspective on the rational design of advanced interfaces to enable highly reversible Zn^(2+)plating/stripping reactions toward highly stable AZMBs,paving the way for their practical implementation in energy storage.
