High-energy-density lithium metal batteries hold great promise for advancing low-altitude economic development.However,the practical application of ultrathin lithium anodes remains challenging due to significant inter...High-energy-density lithium metal batteries hold great promise for advancing low-altitude economic development.However,the practical application of ultrathin lithium anodes remains challenging due to significant interfacial side reactions,dendrite formation,and substantial volume fluctuations.In this study,lithium metal electrodes were fabricated using a spin-coating process,enabling an in situ reaction between lithium and phenyl disulfide(PDS).The resulting robust organic sulfurization interface,composed of lithium thiophenoxide,facilitates rapid lithium-ion transport and effectively suppresses dendrite formation.Symmetric cells with a 50μm Li@PDS anode exhibited an impressive lifespan exceeding3000 h at 1 mA cm^(-2)and 1 mAh cm^(-2).The Li@PDS anode demonstrated excellent structural stability in a practical LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)lILi@PDS pouch cell,maintaining 94.8%of its initial capacity(1.45 Ah)over 260 cycles at a 0.4C rate and 87.30%of its initial capacity(1.1 Ah)over 360 cycles at a 2C rate(1C=200 mA g^(-1)).This work provides a promising pathway for developing durable lithium metal anodes suitable for scalable practical applications.展开更多
Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junctio...Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junction device had surpassed 19%.The cathode interface layer(CIL),by optimizing the connection between the active layer and the cathode electrode,has become a momentous part to strengthen the performances of the OSCs.Simultaneously,CIL is also indispensable to illustrating the working mechanism of OSCs and enhancing the stability of the OSCs.In this essay,hybrid CILs in OSCs have been summarized.Firstly,the advancement and operating mechanism of OSCs,and the effects and relevant design rules of CIL are briefly concluded;secondly,the significant influence of CIL on enhancing the stability and PCE of OSCs is presented;thirdly,the characteristics of organic hybrid CIL and organic-inorganic hybrid CIL are introduced.Finally,the conclusion and outlook of CIL are summarized.展开更多
Photo-activities at Inorganic/Organic/Interfaces (IOI) consisting of CdS/ Polyterthiophine (PTTh) assemblies were investigated in nanoparticle suspension and in thin solid film forms. The effects PTTh modifier cause o...Photo-activities at Inorganic/Organic/Interfaces (IOI) consisting of CdS/ Polyterthiophine (PTTh) assemblies were investigated in nanoparticle suspension and in thin solid film forms. The effects PTTh modifier cause on the photoelec-trochemical behavior of the IOI were investigated using [Fe(CN)6]4- as photoactive hydrated electron donor agent. Results show that the adsorption process of [Fe(CN)6]3- (photolysis product) control the photoactivity outcome of IOI assemblies. CdS/PTTh shows lower heterogeneous photochemical response than native CdS. Native CdS amorphous nanoparticles adsorb more [Fe(CN)6]3- with very steady adsorption /desorption process than the modified ones. The interface activities were explained by analyzing the IOI junctions’ characteristics, such as electron affinity, work function and hole/electrons barrier heights. The aqueous nano-systems retained moderate stability as indicated by the reproducibility of their photocatalytic activities. Both [Fe(CN)6]4- and PTTh contributed to the stability of native CdS surfaces.展开更多
Nacre, or mother-of-pearl, is a kind of composites of aragonite platelets sandwiched between organic materials. Its excellent mechanical properties are thought to stem from the micro architecture that is traditionally...Nacre, or mother-of-pearl, is a kind of composites of aragonite platelets sandwiched between organic materials. Its excellent mechanical properties are thought to stem from the micro architecture that is traditionally described as a 'brick and mortar' arrangement. In this paper, a new microstructure, referred to as mineral bridge in the biomineralization, is directly observed in the organic matrix layers (mortar) of nacre. This is an indication that the organic matrix layer of nacre should be treated as a three-dimensional interface and the micro architecture of nacre ought to be considered as a 'brick-bridge-mortar' structure rather than the traditional one. Experiments and analyses show that the mineral bridges not only improve the mechanical properties of the organic matrix layers but also play an important role in the pattern of the crack extension in nacre.展开更多
The selective electrochemical conversion of glycerol into value-added products is a green and sustainable strategy for the biomass utilization.In this work,Au nanowires(Au-NW)modified with polyethyleneimine(PEI)molecu...The selective electrochemical conversion of glycerol into value-added products is a green and sustainable strategy for the biomass utilization.In this work,Au nanowires(Au-NW)modified with polyethyleneimine(PEI)molecule(Au-NW@PEI)is obtained by an up-bottom post-modification approach.Physical characterization,molecular dynamics simulation and density functional theory demonstrate that the loose-packed PEI monolayer firmly and uniformly distribute on the Au-NW surface due to the strong Au-N interaction.Electrochemical experiments and product analysis display that PEI modification significantly enhance the electro-activity of Au-NW for the glycerol electro-oxidation reaction(GEOR)due to the electronic effect.Meanwhile,the steric hindrance and electrostatic effect of PEI layer make the optimizing adsorption of intermediates possible.Therefore,the selectivity of C3 product glyceric acid over Au-NW@PEI is increased by nearly 20%.The work thus indicates that the rational design of metal-organic interface can effectively elevate the electro-activity and selectivity of Au nanostructures,which may have wide application in biomass development.展开更多
Based on the transmission electron micrographs of nacre, the existence of mineral bridges in the organic matrix interface is confirmed. It is proposed that the microarchitecture of nacre should be considered as a “br...Based on the transmission electron micrographs of nacre, the existence of mineral bridges in the organic matrix interface is confirmed. It is proposed that the microarchitecture of nacre should be considered as a “brick-bridge-mortar” (BBM) arrangement rather than traditional “brick and mortar” (BM) one. Experiments and analyses indicate that the mineral bridges effectively affect the strength and toughness of the interfaces in nacre. Comparison with a laminated composite with BM structure, SiC/BN, shows that the pattern of the crack extension and the toughening mechanism of the two materials are different. This reveals that the mineral bridges play a key role in the toughening mechanisms of nacre, which gives a conceptual guidance in material synthesis.展开更多
Flexible electronics demand multifunctional human-machine interfaces(HMIs)and organic user interfaces(OUIs).Existing deformable displays often rely on mechanical wires or hinges,limiting their thinness and flexibility...Flexible electronics demand multifunctional human-machine interfaces(HMIs)and organic user interfaces(OUIs).Existing deformable displays often rely on mechanical wires or hinges,limiting their thinness and flexibility.Incorporating sound features typically requires extra components,complicating design.In this study,we developed a lightweight,multifunctional display with a multishape bendable design and integrated sound capabilities.Using asymmetrical strain engineering on poly(vinylidene fluoride)(PVDF),we achieved bidirectional and complex deformations through electrical signals,eliminating the need for mechanical hinges.The PVDF actuator enables simultaneous sound emission and intricate shape transformations through rapid actuation and vibration.This design maintains the thinness and flexibility of organic light-emitting diode(OLED)technology.By controlling strain through PVDF polarization and applied electric field,we realized varied shape transformations and integrated these functions into a practical 6-inch OLED display.This approach enhances the functionality of flexible displays,expanding possibilities for future applications in flexible electronics.展开更多
Microwave absorption materials are prone to degradation in extremely humid and salty environments,and it is still challenging to develop a dense and firm interface to protect microwave absorbers.Herein,a robust FeSiAl...Microwave absorption materials are prone to degradation in extremely humid and salty environments,and it is still challenging to develop a dense and firm interface to protect microwave absorbers.Herein,a robust FeSiAl@PUA@SiO2(PUA:acrylic polyurethane)gradient hybrid was prepared through plasma-enhanced chemical vapor deposition(PECVD)to achieve efficient microwave absorption and anti-corrosion properties.The organic/inorganic dual coat of PUA/SiO2 not only facilitated the interface polarization but also effectively reduced the dielectric constant and optimized impedance matching.Owing to the unique hybrid structure,the(PECVD-FeSiAl@PUA)@SiO_(2) exhibited highly efficient microwave absorbing performance in frequency bands covering almost the entire Ku-bands(12-18 GHz)with a minimum reflection loss(RLmin)of−47 dB with a matching thickness of 2.3 mm.The organic/inorganic dual protection effectively shields against the corrosive medium,as the corrosion potential and the polarization resistance increased from−0.167 to−0.047 V and 8,064 to 16,273Ω·cm^(2),respectively.While the corrosion current decreased from 3.04×10^(−6) to 2.16×10^(−6) A/cm^(2).Hence,the plasma-enhanced densification of PUA created a strong bridge to integrate FeSiAl and organic/inorganic components acquiring dual-function of efficient microwave absorption and anticorrosion,which opened a promising platform for potential practical absorbers.展开更多
Printing of metal bottom back electrodes of flexible organic solar cells（FOSCs） at low temperature is of great significance to realize the full-solution fabrication technology. However, this has been difficult to ac...Printing of metal bottom back electrodes of flexible organic solar cells（FOSCs） at low temperature is of great significance to realize the full-solution fabrication technology. However, this has been difficult to achieve because often the interfacial properties of those printed electrodes, including conductivity, roughness, work function,optical and mechanical flexibility, cannot meet the device requirement at the same time. In this work, we fabricate printed Ag and Cu bottom back cathodes by a low-temperature solution technique named polymer-assisted metal deposition（PAMD） on flexible PET substrates. Branched polyethylenimine（PEI） and ZnO thin films are used as the interface modification layers（IMLs） of these cathodes. Detailed experimental studies on the electrical, mechanical, and morphological properties, and simulation study on the optical properties of these IMLs are carried out to understand and optimize the interface of printed cathodes. We demonstrate that the highest power conversion efficiency over 3.0% can be achieved from a full-solution processed OFSC with the device structure being PAMDAg/PEI/P3 HT：PC61BM/PH1000. This device also acquires remarkable stability upon repeating bending tests.展开更多
As dipyranylidenes are excellent hole carriers, applications in organic solar cells or organic light emitting diode are envisaged. In the present study, we investigate the morphology of 2,2＇,6,6＇-tetraphenyl-4,4＇-d...As dipyranylidenes are excellent hole carriers, applications in organic solar cells or organic light emitting diode are envisaged. In the present study, we investigate the morphology of 2,2＇,6,6＇-tetraphenyl-4,4＇-dipyranylidene （DIPO-Ph4） deposited under vacuum on a silicon nitride （Si3N4） substrate, a paradigmatic system for the study of molecular crystal/inorganic substrate interfaces. Samples with various coating ratios and different thermal treatments were prepared. The films were characterized by atomic force microscopy and scanning transmission X-ray microscopy to gain insight into material growth. The results show a change in orientation at a molecular level depending upon the evaporation conditions. We are now able to tailor an organic layer with a specific molecular orientation and a specific electronic behavior.展开更多
基金financially supported by the National Natural Science Foundation of China (No.52471166)the Central South University Graduate-Student Autonomous Exploration Innovative Programme (No.2024ZZTS0373)
文摘High-energy-density lithium metal batteries hold great promise for advancing low-altitude economic development.However,the practical application of ultrathin lithium anodes remains challenging due to significant interfacial side reactions,dendrite formation,and substantial volume fluctuations.In this study,lithium metal electrodes were fabricated using a spin-coating process,enabling an in situ reaction between lithium and phenyl disulfide(PDS).The resulting robust organic sulfurization interface,composed of lithium thiophenoxide,facilitates rapid lithium-ion transport and effectively suppresses dendrite formation.Symmetric cells with a 50μm Li@PDS anode exhibited an impressive lifespan exceeding3000 h at 1 mA cm^(-2)and 1 mAh cm^(-2).The Li@PDS anode demonstrated excellent structural stability in a practical LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)lILi@PDS pouch cell,maintaining 94.8%of its initial capacity(1.45 Ah)over 260 cycles at a 0.4C rate and 87.30%of its initial capacity(1.1 Ah)over 360 cycles at a 2C rate(1C=200 mA g^(-1)).This work provides a promising pathway for developing durable lithium metal anodes suitable for scalable practical applications.
基金supported by the National Natural Science Foundation of China(52263017,21965023,52173170,51973087,and22065025)the Science Fund for Distinguished Young Scholars of Jiangxi Province(20212ACB214009)+2 种基金the Natural Science Foundation of Jiangxi Province(20212ACB203010,20224BAB214007 and20212BAB204052)the Training Project of High-level and Highskilled Leading Talents of Jiangxi Province(2023)the Thousand Talents Plan of Jiangxi Province(jxsq2019201004 and jxsq2020101068)。
文摘Organic solar cells(OSCs)have gained conspicuous progress during the past few decades due to the development of materials and upgrading of the device structure.The power conversion efficiency(PCE)of the single-junction device had surpassed 19%.The cathode interface layer(CIL),by optimizing the connection between the active layer and the cathode electrode,has become a momentous part to strengthen the performances of the OSCs.Simultaneously,CIL is also indispensable to illustrating the working mechanism of OSCs and enhancing the stability of the OSCs.In this essay,hybrid CILs in OSCs have been summarized.Firstly,the advancement and operating mechanism of OSCs,and the effects and relevant design rules of CIL are briefly concluded;secondly,the significant influence of CIL on enhancing the stability and PCE of OSCs is presented;thirdly,the characteristics of organic hybrid CIL and organic-inorganic hybrid CIL are introduced.Finally,the conclusion and outlook of CIL are summarized.
文摘Photo-activities at Inorganic/Organic/Interfaces (IOI) consisting of CdS/ Polyterthiophine (PTTh) assemblies were investigated in nanoparticle suspension and in thin solid film forms. The effects PTTh modifier cause on the photoelec-trochemical behavior of the IOI were investigated using [Fe(CN)6]4- as photoactive hydrated electron donor agent. Results show that the adsorption process of [Fe(CN)6]3- (photolysis product) control the photoactivity outcome of IOI assemblies. CdS/PTTh shows lower heterogeneous photochemical response than native CdS. Native CdS amorphous nanoparticles adsorb more [Fe(CN)6]3- with very steady adsorption /desorption process than the modified ones. The interface activities were explained by analyzing the IOI junctions’ characteristics, such as electron affinity, work function and hole/electrons barrier heights. The aqueous nano-systems retained moderate stability as indicated by the reproducibility of their photocatalytic activities. Both [Fe(CN)6]4- and PTTh contributed to the stability of native CdS surfaces.
基金The project supported by the Natural Science Foundation of Chinese Academy of Sciences (KJ951-1-201) the National Natural Science Foundation of China (19891180 and 10072067)
文摘Nacre, or mother-of-pearl, is a kind of composites of aragonite platelets sandwiched between organic materials. Its excellent mechanical properties are thought to stem from the micro architecture that is traditionally described as a 'brick and mortar' arrangement. In this paper, a new microstructure, referred to as mineral bridge in the biomineralization, is directly observed in the organic matrix layers (mortar) of nacre. This is an indication that the organic matrix layer of nacre should be treated as a three-dimensional interface and the micro architecture of nacre ought to be considered as a 'brick-bridge-mortar' structure rather than the traditional one. Experiments and analyses show that the mineral bridges not only improve the mechanical properties of the organic matrix layers but also play an important role in the pattern of the crack extension in nacre.
基金sponsored by National Natural Science Foundation of China(No.22202130)China Postdoctoral Science Foundation(No.2022M710088)+3 种基金Science and Technology Innovation Team of Shaanxi Province(Nos.2023-CX-TD-27 and 2022TD-35)Fundamental Research Funds for the Central Universities(Nos.GK202202001 and GK202101005)Open Funds of the State Key Laboratory of Electroanalytical Chemistry(No.SKLEAC202207)the 111 Project(No.B14041)。
文摘The selective electrochemical conversion of glycerol into value-added products is a green and sustainable strategy for the biomass utilization.In this work,Au nanowires(Au-NW)modified with polyethyleneimine(PEI)molecule(Au-NW@PEI)is obtained by an up-bottom post-modification approach.Physical characterization,molecular dynamics simulation and density functional theory demonstrate that the loose-packed PEI monolayer firmly and uniformly distribute on the Au-NW surface due to the strong Au-N interaction.Electrochemical experiments and product analysis display that PEI modification significantly enhance the electro-activity of Au-NW for the glycerol electro-oxidation reaction(GEOR)due to the electronic effect.Meanwhile,the steric hindrance and electrostatic effect of PEI layer make the optimizing adsorption of intermediates possible.Therefore,the selectivity of C3 product glyceric acid over Au-NW@PEI is increased by nearly 20%.The work thus indicates that the rational design of metal-organic interface can effectively elevate the electro-activity and selectivity of Au nanostructures,which may have wide application in biomass development.
基金the National Natural Science Foundations of China (Grant Nos. 19891180 and 10072067) and the Natural Science Foundation of Chinese Academy of Sciences (KJ951-1-201) .
文摘Based on the transmission electron micrographs of nacre, the existence of mineral bridges in the organic matrix interface is confirmed. It is proposed that the microarchitecture of nacre should be considered as a “brick-bridge-mortar” (BBM) arrangement rather than traditional “brick and mortar” (BM) one. Experiments and analyses indicate that the mineral bridges effectively affect the strength and toughness of the interfaces in nacre. Comparison with a laminated composite with BM structure, SiC/BN, shows that the pattern of the crack extension and the toughening mechanism of the two materials are different. This reveals that the mineral bridges play a key role in the toughening mechanisms of nacre, which gives a conceptual guidance in material synthesis.
基金supported by the Technology InnovationProgram(20023588)funded by the Ministry ofTrade,Industry,and Energy(MOTIE,Korea)the LG Display-POSTECH Incubation collaboration PJT and BK21 FOUR program,Educational Institute for Intelligent Information Integration of the National Research Foundation of Korea(NRF,Korea)。
文摘Flexible electronics demand multifunctional human-machine interfaces(HMIs)and organic user interfaces(OUIs).Existing deformable displays often rely on mechanical wires or hinges,limiting their thinness and flexibility.Incorporating sound features typically requires extra components,complicating design.In this study,we developed a lightweight,multifunctional display with a multishape bendable design and integrated sound capabilities.Using asymmetrical strain engineering on poly(vinylidene fluoride)(PVDF),we achieved bidirectional and complex deformations through electrical signals,eliminating the need for mechanical hinges.The PVDF actuator enables simultaneous sound emission and intricate shape transformations through rapid actuation and vibration.This design maintains the thinness and flexibility of organic light-emitting diode(OLED)technology.By controlling strain through PVDF polarization and applied electric field,we realized varied shape transformations and integrated these functions into a practical 6-inch OLED display.This approach enhances the functionality of flexible displays,expanding possibilities for future applications in flexible electronics.
基金This work was financially supported by the National Natural Science Foundation of China(No.51972045)the Fundamental Research Funds for the Chinese Central Universities,China(No.ZYGX2019J025)Sichuan Science and Technology Program(No.2021YFG0373).
文摘Microwave absorption materials are prone to degradation in extremely humid and salty environments,and it is still challenging to develop a dense and firm interface to protect microwave absorbers.Herein,a robust FeSiAl@PUA@SiO2(PUA:acrylic polyurethane)gradient hybrid was prepared through plasma-enhanced chemical vapor deposition(PECVD)to achieve efficient microwave absorption and anti-corrosion properties.The organic/inorganic dual coat of PUA/SiO2 not only facilitated the interface polarization but also effectively reduced the dielectric constant and optimized impedance matching.Owing to the unique hybrid structure,the(PECVD-FeSiAl@PUA)@SiO_(2) exhibited highly efficient microwave absorbing performance in frequency bands covering almost the entire Ku-bands(12-18 GHz)with a minimum reflection loss(RLmin)of−47 dB with a matching thickness of 2.3 mm.The organic/inorganic dual protection effectively shields against the corrosive medium,as the corrosion potential and the polarization resistance increased from−0.167 to−0.047 V and 8,064 to 16,273Ω·cm^(2),respectively.While the corrosion current decreased from 3.04×10^(−6) to 2.16×10^(−6) A/cm^(2).Hence,the plasma-enhanced densification of PUA created a strong bridge to integrate FeSiAl and organic/inorganic components acquiring dual-function of efficient microwave absorption and anticorrosion,which opened a promising platform for potential practical absorbers.
基金supported by the Research Grant Council of Hong Kong(No.PolyUC5015-15G)the Hong Kong Polytechnic University(No.G-SB06)the National Natural Science Foundation of China(Nos.21125316,21434009,51573026)
文摘Printing of metal bottom back electrodes of flexible organic solar cells（FOSCs） at low temperature is of great significance to realize the full-solution fabrication technology. However, this has been difficult to achieve because often the interfacial properties of those printed electrodes, including conductivity, roughness, work function,optical and mechanical flexibility, cannot meet the device requirement at the same time. In this work, we fabricate printed Ag and Cu bottom back cathodes by a low-temperature solution technique named polymer-assisted metal deposition（PAMD） on flexible PET substrates. Branched polyethylenimine（PEI） and ZnO thin films are used as the interface modification layers（IMLs） of these cathodes. Detailed experimental studies on the electrical, mechanical, and morphological properties, and simulation study on the optical properties of these IMLs are carried out to understand and optimize the interface of printed cathodes. We demonstrate that the highest power conversion efficiency over 3.0% can be achieved from a full-solution processed OFSC with the device structure being PAMDAg/PEI/P3 HT：PC61BM/PH1000. This device also acquires remarkable stability upon repeating bending tests.
文摘As dipyranylidenes are excellent hole carriers, applications in organic solar cells or organic light emitting diode are envisaged. In the present study, we investigate the morphology of 2,2＇,6,6＇-tetraphenyl-4,4＇-dipyranylidene （DIPO-Ph4） deposited under vacuum on a silicon nitride （Si3N4） substrate, a paradigmatic system for the study of molecular crystal/inorganic substrate interfaces. Samples with various coating ratios and different thermal treatments were prepared. The films were characterized by atomic force microscopy and scanning transmission X-ray microscopy to gain insight into material growth. The results show a change in orientation at a molecular level depending upon the evaporation conditions. We are now able to tailor an organic layer with a specific molecular orientation and a specific electronic behavior.
