The scaled suction caisson repre sents an innovative design featuring a bio-inspired sidewall modeled after snake skin,commonly utilized in offshore mooring platforms.In comparison with traditional suction caissons,th...The scaled suction caisson repre sents an innovative design featuring a bio-inspired sidewall modeled after snake skin,commonly utilized in offshore mooring platforms.In comparison with traditional suction caissons,this bio-inspired design demonstrates reduced penetration resistance and enhanced pull-out capacity due to the anisotropic shear behaviors of its sidewall.To investigate the shear behavior of the bio-inspired sidewall under pull-out load,direct shear tests were conducted between the bio-inspired surface and sand.The research demonstrates that the interface shear strength of the bio-inspired surface significantly surpasses that of the smooth surface due to interlocking effects.Additionally,the interface shear strength correlates with the aspect ratio of the bio-inspired surface,shear angle,and particle diameter distribution,with values increasing as the uniformity coefficient Cudecreases,while initially increasing and subsequently decreasing with increases in both aspect ratio and shear angle.The ratio between the interface friction angleδand internal friction angle δ_(s) defines the interface effect factor k.For the bio-inspired surface,the interface effect factor k varies with shear angleβ,ranging from 0.9 to 1.12.The peak value occurs at a shear angleβof 60°,substantially exceeding that of the smooth surface.A method for calculating the relative roughness R_(N) is employed to evaluate the interface roughness of the bio-inspired surface,taking into account scale dimension and particle diameter distribution effects.展开更多
The two-dimensional electron gas(2DEG)formed at the interface between two oxide insulators provides new opportunities for electronics and spintronics.The broken inversion symmetry at the heterointerface results in a R...The two-dimensional electron gas(2DEG)formed at the interface between two oxide insulators provides new opportunities for electronics and spintronics.The broken inversion symmetry at the heterointerface results in a Rashba spin-orbit coupling(RSOC)effect that enables the conversion between spin and charge currents.However,conducting oxide interfaces that simultaneously exhibit strong RSOC and high carrier mobility-a combination query for achieving high spin-to-charge inter-conversion efficiencies-remain scarce.Herein,we report a correlated 2DEG with giant Rashba splitting and high electron mobility in(111)-oriented EuTiO_(3)/KTaO_(3)(ETO/KTO)heterostructures under light illumination.Upon light modulation,a unique carrier-dependent giant anomalous Hall effect,the signature of spin-polarized 2DEG,emerges with a sign crossover at a carrier density of approximately 5.0×10^(13)cm^(-2),highlighting dramatic changes in the band topology of KTO(111)interface.Furthermore,at 2 K,the carrier mobility is enhanced from 103 cm^(2)·V^(-1)·s^(-1)to 1800 cm^(2)·V^(-1)·s^(-1),a remarkable enhancement of approximately 20 times.Accompanying with a giant Rashba coefficient αR up to 360meV·˚A,this high mobility ferromagnetic 5d oxide 2DEG is predicted to achieve a giant spin-to-charge conversion efficiency ofλ~10 nm,showing great potential for designing low-power spin-orbitronic devices.展开更多
Rapid and robust identification of bacteria is crucial for environmental monitoring and clinical diagnosis.Herein,a bioinspired interface-mediated multichannel sensor array was developed based on three-coloremitting a...Rapid and robust identification of bacteria is crucial for environmental monitoring and clinical diagnosis.Herein,a bioinspired interface-mediated multichannel sensor array was developed based on three-coloremitting antimicrobial functional carbon dots(FCDs)and concanavalin A doped polydopamine nanoparticles(Con A-PDA)for identification of bacteria.In this sensor,the fluorescence intensity of the three FCDs was quenched by the Con A-PDA.Upon addition different types of bacteria,the fluorescence intensity of the three FCDs was restored or further quenched.Recur to statistical analysis methods,it is employed to accurately discriminate 10 types of bacteria(including three probiotics and seven pathogenic bacteria)in natural water samples and human urine samples.The discrimination ability of the sensor array was highly enhanced via different competing binding of the FCDs and the bacteria toward Con A-PDA.The proposed array-based method offers a rapid,high-throughput,and reliable sensing platform for pathogen diagnosis in the field of environmental monitoring and clinical diagnosis.展开更多
Understanding frictional anisotropy,which refers to the variation in frictional resistance based on the shear direction,is crucial for optimizing the friction angle between a bio-inspired structure and the surrounding...Understanding frictional anisotropy,which refers to the variation in frictional resistance based on the shear direction,is crucial for optimizing the friction angle between a bio-inspired structure and the surrounding soil.Previous studies focused on estimating the interface frictional anisotropy mobilized by snakeskin-inspired textured surfaces and sand under monotonic shear loading conditions.However,there is a need to estimate interface frictional anisotropy under repetitive shear loads.In this study,a series of repetitive direct shear(DS)tests are performed with snakeskin-inspired textured surfaces under a constant vertical stress and two shear directions(cranial first half→caudal second half or caudal first half→cranial second half).The results show that(1)mobilized shear stress increases with the number of shearing cycles,(2)cranial shearing(shearing against the scales)consistently produces a higher shear resistance and less contractive behavior than caudal shearing(shearing along the scales),and(3)a higher scale height or smaller scale length of the surface yields a higher interface friction angle across all shearing cycles.Further analysis reveals that the gap between the cranial and caudal shear zones of the interface friction angle as a function of L/H(i.e.the ratio of scale length L to scale height H)continues to decrease as the number of shearing cycles approaches asymptotic values.The directional frictional resistance(DFR)decreases as the number of shearing cycles increases.Furthermore,the discussion covers the impact of initial relative density,vertical stress,and the number of shearing cycles on interface frictional anisotropy.展开更多
Small-scale magnetic soft robots are promising candidates for minimally invasive medical applications;however,they struggle to achieve efficient locomotion across various interfaces.In this study,we propose a magnetic...Small-scale magnetic soft robots are promising candidates for minimally invasive medical applications;however,they struggle to achieve efficient locomotion across various interfaces.In this study,we propose a magnetic soft robot that integrates two distinct bio-inspired locomotion modes for enhanced interface navigation.Inspired by water striders’superhydrophobic legs and the meniscus climbing behavior of Pyrrhalta nymphaeae larvae,we developed a rectangular sheet-based robot with hydrophobic surface treatment and novel control strategies.The proposed robot implements two locomotion modes:a bipedal peristaltic locomotion mode(BPLM)and a single-region contact-vibration locomotion mode(SCLM).The BPLM achieves stable movement at 20 mm/s through coordinated front-rear contact points,whereas the SCLM reaches an ultrafast speed of 52 mm/s by optimizing surface tension interactions.The proposed robot demonstrates precise trajectory control with minimal deviations and successfully navigates confined spaces while manipulating objects.Theoretical analysis and experimental validation demonstrate that the integration of triangular wave control signals and steady-state components enables smooth transitions between locomotion modes.This study presents a new paradigm for bio-inspired design of small-scale robots and demonstrates the potential for medical applications requiring precise navigation across multiple terrains.展开更多
Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography...Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography and microelectrode arrays.The challenges of these mentioned approaches are characterized by the bandwidth of the spatiotemporal resolution,which in turn is essential for large-area neuron recordings(Abiri et al.,2019).展开更多
High-performance alloys are indispensable in modern engineering because of their exceptional strength,ductility,corrosion resistance,fatigue resistance,and thermal stability,which are all significantly influenced by t...High-performance alloys are indispensable in modern engineering because of their exceptional strength,ductility,corrosion resistance,fatigue resistance,and thermal stability,which are all significantly influenced by the alloy interface structures.Despite substantial efforts,a comprehensive overview of interface engineering of high-performance alloys has not been presented so far.In this study,the interfaces in high-performance alloys,particularly grain and phase boundaries,were systematically examined,with emphasis on their crystallographic characteristics and chemical element segregations.The effects of the interfaces on the electrical conductivity,mechanical strength,toughness,hydrogen embrittlement resistance,and thermal stability of the alloys were elucidated.Moreover,correlations among various types of interfaces and advanced experimental and computational techniques were examined using big data analytics,enabling robust design strategies.Challenges currently faced in the field of interface engineering and emerging opportunities in the field are also discussed.The study results would guide the development of next-generation high-performance alloys.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving...Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving the overall performance of CPEs due to their difficulty in achieving robust electrochemical and mechanical interfaces simultaneously.Here,by regulating the surface charge characteristics of halloysite nanotube(HNT),we propose a concept of lithium-ion dynamic interface(Li^(+)-DI)engineering in nano-charged CPE(NCCPE).Results show that the surface charge characteristics of HNTs fundamentally change the Li^(+)-DI,and thereof the mechanical and ion-conduction behaviors of the NCCPEs.Particularly,the HNTs with positively charged surface(HNTs+)lead to a higher Li^(+)transference number(0.86)than that of HNTs-(0.73),but a lower toughness(102.13 MJ m^(-3)for HNTs+and 159.69 MJ m^(-3)for HNTs-).Meanwhile,a strong interface compatibilization effect by Li^(+)is observed for especially the HNTs+-involved Li^(+)-DI,which improves the toughness by 2000%compared with the control.Moreover,HNTs+are more effective to weaken the Li^(+)-solvation strength and facilitate the formation of Li F-rich solid-electrolyte interphase of Li metal compared to HNTs-.The resultant Li|NCCPE|LiFePO4cell delivers a capacity of 144.9 m Ah g^(-1)after 400 cycles at 0.5 C and a capacity retention of 78.6%.This study provides deep insights into understanding the roles of surface charges of nanofillers in regulating the mechanical and electrochemical interfaces in ASSLMBs.展开更多
Based on ab initio theory, the interracial spin polarization of a benzene-dithiolate molecule vertically adsorbed on a nickel surface is investigated by adopting different microscopic con- tact configurations. The res...Based on ab initio theory, the interracial spin polarization of a benzene-dithiolate molecule vertically adsorbed on a nickel surface is investigated by adopting different microscopic con- tact configurations. The results demonstrate a strong dependence of the interfacial spin polarization on the contact configuration, where the sign of spin polarization may vary from positive to negative with the change of contact configuration. By analyzing the projected density of states, an interracial orbital hybridization between the 3d orbital of the nickel atom and the sp3 hybridized orbital of the sulfur atom is observed. We also simulated the interracial adsorption in mechanically controllable break junction experiments. The magne- toresistance obtained from Julliere model is about 27% based on the calculated interracial spin polarization, which is consistent with experimental measurement.展开更多
Spinel LiNi_(0.5)Mn_(1.5)O_(4)(LNMO),a 5 V class high voltage cathode,has been regarded as an attractive candidate to further improve the energy density of lithium-ion battery.The issue simultaneously enabling side st...Spinel LiNi_(0.5)Mn_(1.5)O_(4)(LNMO),a 5 V class high voltage cathode,has been regarded as an attractive candidate to further improve the energy density of lithium-ion battery.The issue simultaneously enabling side stability and maintaining high interfacial kinetics,however,has not yet been resolved.Herein,we design a coherent Li_(1.3)A_(l0.3)Ti_(1.7)(PO)_(4)(LATP)layer that is crystally connected to the spinel LNMO host lattices,which offers fast lithium ions transportation as well as enhances the mechanical stability that prevents the particle fracture.Furthermore,the inactive Li_(3)BO_(3)(LBO)coating layer inhibits the corrosion of transition metals and continuous side reactions.Consequently,the coherent-engineered LNMO-LATPLBO cathode material exhibits superior electrochemical cycling stability in a window of 3.0–5.0 V,for example a high-capacity retention that is 89.7%after 500 cycles at 200 m A g-1obtained and enhanced rate performance(85.1 m A h g^(-1)at 800 m A g^(-1))when tested with a LiPF6-based carbonate electrolyte.Our work presents a new approach of engineering 5 V class spinel oxide cathode that combines interfacial coherent crystal lattice design and surface coating.展开更多
Model composites consisting of Si C fiber embedded inβ-Yb_(2)Si_(2)O_(7) matrix were processed by Spark Plasma Sintering method and the feasibility of tunable Si Cf/Yb_(2)Si_(2)O_(7) interface in Si C-based CMCs were...Model composites consisting of Si C fiber embedded inβ-Yb_(2)Si_(2)O_(7) matrix were processed by Spark Plasma Sintering method and the feasibility of tunable Si Cf/Yb_(2)Si_(2)O_(7) interface in Si C-based CMCs were estimated.Weak and strengthened Si Cf/Yb_(2)Si_(2)O_(7) interfaces were achieved by adjusting sintering temperatures.The indentation crack test and fiber push out experiments clearly demonstrated the different debonding mechanisms in the samples.Weak interfaces sintered at 1200 and 1250℃exhibited crack deflection at interface in indentation test.Their low debond energy at the interface,which were comparable to those of Py C or BN,satisfied the well-recognized interfacial debond and crack deflection criteria for CMCs.The interface was strengthened by atomic bonding in model composite sintered at 1450℃,leading to crack penetrating into Si C fiber and high debond energy.The strong interface may be promising in Si Cf/Si C CMC to withstand higher combustion temperature,because Yb_(2)Si_(2)O_(7) will provide plastic deformation capacity,which would serve as weak interphase for crack deflection and energy dissipation.Therefore,it is possible to design the capability of Si C_(f)/RE_(2)Si_(2)O_(7) interface for different requirements by adjusting interfacial strength or debond energy to reach optimal mechanical fuse mechanism in SiC_(f)/SiC CMC.展开更多
The solvent-free in situ polymerization technique has the potential to tailor-make conformal interfaces that are essential for developing durable and safe lithium metal polymer batteries(LMPBs).Hence,much attention ha...The solvent-free in situ polymerization technique has the potential to tailor-make conformal interfaces that are essential for developing durable and safe lithium metal polymer batteries(LMPBs).Hence,much attention has been given to the eco-friendly and rapid ultraviolet(UV)-induced in situ photopolymerization process to prepare solid-state polymer electrolytes.In this respect,an innovative method is proposed here to overcome the challenges of UV-induced photopolymerization(UV-curing)in the zones where UV-light cannot penetrate,especially in LMPBs where thick electrodes are used.The proposed frontal-inspired photopolymerization(FIPP)process is a diverged frontal-based technique that uses two classes(dual)of initiators to improve the slow reaction kinetics of allyl-based monomers/oligomers by at least 50%compared with the conventional UV-curing process.The possible reaction mechanism occurring in FIPP is demonstrated using density functional theory calculations and spectroscopic investigations.Indeed,the initiation mechanism identified for the FIPP relies on a photochemical pathway rather than an exothermic propagating front forms during the UV-irradiation step as the case with the classical frontal photopolymerization technique.Besides,the FIPP-based in situ cell fabrication using dual initiators is advantageous over both the sandwich cell assembly and conventional in situ photopolymerization in overcoming the limitations of mass transport and active material utilization in high energy and high power LMPBs that use thick electrodes.Furthermore,the LMPB cells fabricated using the in situ-FIPP process with high mass loading LiFePO_(4)electrodes(5.2 mg cm^(-2))demonstrate higher rate capability,and a 50%increase in specific capacity against a sandwich cell encouraging the use of this innovative process in large-scale solid-state battery production.展开更多
Interface engineering can improve the charge separation efficiency and inhibit photocorrosion is an emerging direction of developing more efficient and cost-effective photocatalytic systems.Herein,we report the sulfur...Interface engineering can improve the charge separation efficiency and inhibit photocorrosion is an emerging direction of developing more efficient and cost-effective photocatalytic systems.Herein,we report the sulfur-confined intimate Cd S intergrown Cd(Cd S/Cd)Ohmic junction(peanut-chocolate-ball like)for high-efficient H2production with superior anti-photocorrosion ability,which was fabricated from in-situ photoreduction of CdS intergrown Cd2SO4(OH)2(CdS/Cd2SO4(OH)2)prepared through a facile space-controlled-solvothermal method.The ratios of CdS/Cd can be effectively controlled by tunning that of CdS/Cd2SO4(OH)2which were prepared by adjusting the volume of reaction liquid and the remaining space of the reactor.Experiments investigations and density functional theory(DFT)calculations reveal that the Cd S intergrown Cd Ohmic junction interfaces(with appropriate content Cd intergrown on Cd S(19.54 wt%))are beneficial in facilitating the transfer of photogenerated electrons by constructing an interfacial electric field and forming sulfur-confined structures for preventing the positive holes(h+)oxidize the Cd S.This contributes to a high photocatalytic H2production activity of 95.40μmol h-1(about 32.3 times higher than bare Cd S)and possesses outstanding photocatalytic stability over 205 h,much longer than most Cd S-based photocatalysts previously reported.The interface engineering design inspired by the structure of peanut-chocolate-ball can greatly promote the future development of catalytic systems for wider application.展开更多
Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is con...Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption.However,interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption.In this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal reduction.By utilizing the different properties of different substances,rich heterogeneous interfaces are constructed.This effectively promotes charge transfer and enhances interfacial polarization and conduction loss.The prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy resin.The minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz.Moreover,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces.Therefore,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.展开更多
This paper aims at the presentation of an interface to simulate cardiovascular respiratory system. The authors are interested in the resolution of optimal control problem related to the performance of a 30 years old w...This paper aims at the presentation of an interface to simulate cardiovascular respiratory system. The authors are interested in the resolution of optimal control problem related to the performance of a 30 years old woman. The results show in the most case the determinant parameters of cardiovascular respiratory system reach the equilibrium value due to its controls that is heart rate and alveolar ventilation.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52371301 and 52471289)。
文摘The scaled suction caisson repre sents an innovative design featuring a bio-inspired sidewall modeled after snake skin,commonly utilized in offshore mooring platforms.In comparison with traditional suction caissons,this bio-inspired design demonstrates reduced penetration resistance and enhanced pull-out capacity due to the anisotropic shear behaviors of its sidewall.To investigate the shear behavior of the bio-inspired sidewall under pull-out load,direct shear tests were conducted between the bio-inspired surface and sand.The research demonstrates that the interface shear strength of the bio-inspired surface significantly surpasses that of the smooth surface due to interlocking effects.Additionally,the interface shear strength correlates with the aspect ratio of the bio-inspired surface,shear angle,and particle diameter distribution,with values increasing as the uniformity coefficient Cudecreases,while initially increasing and subsequently decreasing with increases in both aspect ratio and shear angle.The ratio between the interface friction angleδand internal friction angle δ_(s) defines the interface effect factor k.For the bio-inspired surface,the interface effect factor k varies with shear angleβ,ranging from 0.9 to 1.12.The peak value occurs at a shear angleβof 60°,substantially exceeding that of the smooth surface.A method for calculating the relative roughness R_(N) is employed to evaluate the interface roughness of the bio-inspired surface,taking into account scale dimension and particle diameter distribution effects.
基金supported by the Science Center of the National Science Foundation of China(Grant No.52088101)the National Key Research and Development Program of China(Grant Nos.2023YFA1406400,2021YFA1400300,and 2023YFA1607403)the National Natural Science Foundation of China(Grant Nos.T2394472 and T2394470).
文摘The two-dimensional electron gas(2DEG)formed at the interface between two oxide insulators provides new opportunities for electronics and spintronics.The broken inversion symmetry at the heterointerface results in a Rashba spin-orbit coupling(RSOC)effect that enables the conversion between spin and charge currents.However,conducting oxide interfaces that simultaneously exhibit strong RSOC and high carrier mobility-a combination query for achieving high spin-to-charge inter-conversion efficiencies-remain scarce.Herein,we report a correlated 2DEG with giant Rashba splitting and high electron mobility in(111)-oriented EuTiO_(3)/KTaO_(3)(ETO/KTO)heterostructures under light illumination.Upon light modulation,a unique carrier-dependent giant anomalous Hall effect,the signature of spin-polarized 2DEG,emerges with a sign crossover at a carrier density of approximately 5.0×10^(13)cm^(-2),highlighting dramatic changes in the band topology of KTO(111)interface.Furthermore,at 2 K,the carrier mobility is enhanced from 103 cm^(2)·V^(-1)·s^(-1)to 1800 cm^(2)·V^(-1)·s^(-1),a remarkable enhancement of approximately 20 times.Accompanying with a giant Rashba coefficient αR up to 360meV·˚A,this high mobility ferromagnetic 5d oxide 2DEG is predicted to achieve a giant spin-to-charge conversion efficiency ofλ~10 nm,showing great potential for designing low-power spin-orbitronic devices.
基金supported by National Natural Science Foundation of China(Nos.22376057,22174048,22274048,22274045,22274047,and 21904039)the Foundation of the Science&Technology Department of Hunan Province(Nos.2023JJ30394 and2023ZJ1123)。
文摘Rapid and robust identification of bacteria is crucial for environmental monitoring and clinical diagnosis.Herein,a bioinspired interface-mediated multichannel sensor array was developed based on three-coloremitting antimicrobial functional carbon dots(FCDs)and concanavalin A doped polydopamine nanoparticles(Con A-PDA)for identification of bacteria.In this sensor,the fluorescence intensity of the three FCDs was quenched by the Con A-PDA.Upon addition different types of bacteria,the fluorescence intensity of the three FCDs was restored or further quenched.Recur to statistical analysis methods,it is employed to accurately discriminate 10 types of bacteria(including three probiotics and seven pathogenic bacteria)in natural water samples and human urine samples.The discrimination ability of the sensor array was highly enhanced via different competing binding of the FCDs and the bacteria toward Con A-PDA.The proposed array-based method offers a rapid,high-throughput,and reliable sensing platform for pathogen diagnosis in the field of environmental monitoring and clinical diagnosis.
基金the funding supported from the National Research Foundation of Korea(NRF)grant funded by the Korea Government MSIT(No.2021R1C1C1006003).
文摘Understanding frictional anisotropy,which refers to the variation in frictional resistance based on the shear direction,is crucial for optimizing the friction angle between a bio-inspired structure and the surrounding soil.Previous studies focused on estimating the interface frictional anisotropy mobilized by snakeskin-inspired textured surfaces and sand under monotonic shear loading conditions.However,there is a need to estimate interface frictional anisotropy under repetitive shear loads.In this study,a series of repetitive direct shear(DS)tests are performed with snakeskin-inspired textured surfaces under a constant vertical stress and two shear directions(cranial first half→caudal second half or caudal first half→cranial second half).The results show that(1)mobilized shear stress increases with the number of shearing cycles,(2)cranial shearing(shearing against the scales)consistently produces a higher shear resistance and less contractive behavior than caudal shearing(shearing along the scales),and(3)a higher scale height or smaller scale length of the surface yields a higher interface friction angle across all shearing cycles.Further analysis reveals that the gap between the cranial and caudal shear zones of the interface friction angle as a function of L/H(i.e.the ratio of scale length L to scale height H)continues to decrease as the number of shearing cycles approaches asymptotic values.The directional frictional resistance(DFR)decreases as the number of shearing cycles increases.Furthermore,the discussion covers the impact of initial relative density,vertical stress,and the number of shearing cycles on interface frictional anisotropy.
基金supported by the Shenzhen Science and Technology Program(Nos.JCYJ20210324132810026,KQTD20210811090146075,and GXWD20220811164014001)the National Natural Science Foundation of China(Nos.52375175,52005128,62473277,and 52475075)+4 种基金the National Key Research and Development Program of China(No.2022YFC3802302)Guangdong Basic and Applied Basic Research Foundation(No.2024A1515240015)Jiangsu Provincial Outstanding Youth Program(No.BK20230072)Suzhou Industrial Foresight and Key Core Technology Project(No.SYC2022044)a grant from Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems,and grants from Jiangsu Qinglan Project and Jiangsu 333 High-level Talents.
文摘Small-scale magnetic soft robots are promising candidates for minimally invasive medical applications;however,they struggle to achieve efficient locomotion across various interfaces.In this study,we propose a magnetic soft robot that integrates two distinct bio-inspired locomotion modes for enhanced interface navigation.Inspired by water striders’superhydrophobic legs and the meniscus climbing behavior of Pyrrhalta nymphaeae larvae,we developed a rectangular sheet-based robot with hydrophobic surface treatment and novel control strategies.The proposed robot implements two locomotion modes:a bipedal peristaltic locomotion mode(BPLM)and a single-region contact-vibration locomotion mode(SCLM).The BPLM achieves stable movement at 20 mm/s through coordinated front-rear contact points,whereas the SCLM reaches an ultrafast speed of 52 mm/s by optimizing surface tension interactions.The proposed robot demonstrates precise trajectory control with minimal deviations and successfully navigates confined spaces while manipulating objects.Theoretical analysis and experimental validation demonstrate that the integration of triangular wave control signals and steady-state components enables smooth transitions between locomotion modes.This study presents a new paradigm for bio-inspired design of small-scale robots and demonstrates the potential for medical applications requiring precise navigation across multiple terrains.
文摘Invasive as well as non-invasive neurotechnologies conceptualized to interface the central and peripheral nervous system have been probed for the past decades,which refer to electroencephalography,electrocorticography and microelectrode arrays.The challenges of these mentioned approaches are characterized by the bandwidth of the spatiotemporal resolution,which in turn is essential for large-area neuron recordings(Abiri et al.,2019).
基金supported by the National Natural Science Foundation of China(Nos.52122408 and 52474397)the High-level Talent Research Start-up Project Funding of Henan Academy of Sciences(No.242017127)+1 种基金the financial support from the Fundamental Research Funds for the Central Universities(University of Science and Technology Beijing(USTB),Nos.FRF-TP-2021-04C1 and 06500135)supported by USTB MatCom of Beijing Advanced Innovation Center for Materials Genome Engineering。
文摘High-performance alloys are indispensable in modern engineering because of their exceptional strength,ductility,corrosion resistance,fatigue resistance,and thermal stability,which are all significantly influenced by the alloy interface structures.Despite substantial efforts,a comprehensive overview of interface engineering of high-performance alloys has not been presented so far.In this study,the interfaces in high-performance alloys,particularly grain and phase boundaries,were systematically examined,with emphasis on their crystallographic characteristics and chemical element segregations.The effects of the interfaces on the electrical conductivity,mechanical strength,toughness,hydrogen embrittlement resistance,and thermal stability of the alloys were elucidated.Moreover,correlations among various types of interfaces and advanced experimental and computational techniques were examined using big data analytics,enabling robust design strategies.Challenges currently faced in the field of interface engineering and emerging opportunities in the field are also discussed.The study results would guide the development of next-generation high-performance alloys.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金the financial support from the National Natural Science Foundation of China(52203123 and 52473248)State Key Laboratory of Polymer Materials Engineering(sklpme2024-2-04)+1 种基金the Fundamental Research Funds for the Central Universitiessponsored by the Double First-Class Construction Funds of Sichuan University。
文摘Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving the overall performance of CPEs due to their difficulty in achieving robust electrochemical and mechanical interfaces simultaneously.Here,by regulating the surface charge characteristics of halloysite nanotube(HNT),we propose a concept of lithium-ion dynamic interface(Li^(+)-DI)engineering in nano-charged CPE(NCCPE).Results show that the surface charge characteristics of HNTs fundamentally change the Li^(+)-DI,and thereof the mechanical and ion-conduction behaviors of the NCCPEs.Particularly,the HNTs with positively charged surface(HNTs+)lead to a higher Li^(+)transference number(0.86)than that of HNTs-(0.73),but a lower toughness(102.13 MJ m^(-3)for HNTs+and 159.69 MJ m^(-3)for HNTs-).Meanwhile,a strong interface compatibilization effect by Li^(+)is observed for especially the HNTs+-involved Li^(+)-DI,which improves the toughness by 2000%compared with the control.Moreover,HNTs+are more effective to weaken the Li^(+)-solvation strength and facilitate the formation of Li F-rich solid-electrolyte interphase of Li metal compared to HNTs-.The resultant Li|NCCPE|LiFePO4cell delivers a capacity of 144.9 m Ah g^(-1)after 400 cycles at 0.5 C and a capacity retention of 78.6%.This study provides deep insights into understanding the roles of surface charges of nanofillers in regulating the mechanical and electrochemical interfaces in ASSLMBs.
文摘Based on ab initio theory, the interracial spin polarization of a benzene-dithiolate molecule vertically adsorbed on a nickel surface is investigated by adopting different microscopic con- tact configurations. The results demonstrate a strong dependence of the interfacial spin polarization on the contact configuration, where the sign of spin polarization may vary from positive to negative with the change of contact configuration. By analyzing the projected density of states, an interracial orbital hybridization between the 3d orbital of the nickel atom and the sp3 hybridized orbital of the sulfur atom is observed. We also simulated the interracial adsorption in mechanically controllable break junction experiments. The magne- toresistance obtained from Julliere model is about 27% based on the calculated interracial spin polarization, which is consistent with experimental measurement.
基金supported by the Natural Science Foundation of Jiangsu Province(BK20200800)the National Natural Science Foundation of China(22209075,51902165,12004145)+1 种基金the Natural Science Foundation of Jiangxi Province(20212BAB214032,20192ACBL20048)the Key Science and Technology Plan Project of Ji’an City(20211-015311)。
文摘Spinel LiNi_(0.5)Mn_(1.5)O_(4)(LNMO),a 5 V class high voltage cathode,has been regarded as an attractive candidate to further improve the energy density of lithium-ion battery.The issue simultaneously enabling side stability and maintaining high interfacial kinetics,however,has not yet been resolved.Herein,we design a coherent Li_(1.3)A_(l0.3)Ti_(1.7)(PO)_(4)(LATP)layer that is crystally connected to the spinel LNMO host lattices,which offers fast lithium ions transportation as well as enhances the mechanical stability that prevents the particle fracture.Furthermore,the inactive Li_(3)BO_(3)(LBO)coating layer inhibits the corrosion of transition metals and continuous side reactions.Consequently,the coherent-engineered LNMO-LATPLBO cathode material exhibits superior electrochemical cycling stability in a window of 3.0–5.0 V,for example a high-capacity retention that is 89.7%after 500 cycles at 200 m A g-1obtained and enhanced rate performance(85.1 m A h g^(-1)at 800 m A g^(-1))when tested with a LiPF6-based carbonate electrolyte.Our work presents a new approach of engineering 5 V class spinel oxide cathode that combines interfacial coherent crystal lattice design and surface coating.
基金supported by the National Key R&D Program of China under Grant No.2017YFB0703201Natural Science Foundation of China under Grant No.51772302CAS International Cooperation Key Program under Grant No.174321KYSB20180008。
文摘Model composites consisting of Si C fiber embedded inβ-Yb_(2)Si_(2)O_(7) matrix were processed by Spark Plasma Sintering method and the feasibility of tunable Si Cf/Yb_(2)Si_(2)O_(7) interface in Si C-based CMCs were estimated.Weak and strengthened Si Cf/Yb_(2)Si_(2)O_(7) interfaces were achieved by adjusting sintering temperatures.The indentation crack test and fiber push out experiments clearly demonstrated the different debonding mechanisms in the samples.Weak interfaces sintered at 1200 and 1250℃exhibited crack deflection at interface in indentation test.Their low debond energy at the interface,which were comparable to those of Py C or BN,satisfied the well-recognized interfacial debond and crack deflection criteria for CMCs.The interface was strengthened by atomic bonding in model composite sintered at 1450℃,leading to crack penetrating into Si C fiber and high debond energy.The strong interface may be promising in Si Cf/Si C CMC to withstand higher combustion temperature,because Yb_(2)Si_(2)O_(7) will provide plastic deformation capacity,which would serve as weak interphase for crack deflection and energy dissipation.Therefore,it is possible to design the capability of Si C_(f)/RE_(2)Si_(2)O_(7) interface for different requirements by adjusting interfacial strength or debond energy to reach optimal mechanical fuse mechanism in SiC_(f)/SiC CMC.
基金The support provided by the German Federal Ministry of Education and Research(BMBF)within the project“Benchbatt”(03XP0047B)is gratefully acknowledged.
文摘The solvent-free in situ polymerization technique has the potential to tailor-make conformal interfaces that are essential for developing durable and safe lithium metal polymer batteries(LMPBs).Hence,much attention has been given to the eco-friendly and rapid ultraviolet(UV)-induced in situ photopolymerization process to prepare solid-state polymer electrolytes.In this respect,an innovative method is proposed here to overcome the challenges of UV-induced photopolymerization(UV-curing)in the zones where UV-light cannot penetrate,especially in LMPBs where thick electrodes are used.The proposed frontal-inspired photopolymerization(FIPP)process is a diverged frontal-based technique that uses two classes(dual)of initiators to improve the slow reaction kinetics of allyl-based monomers/oligomers by at least 50%compared with the conventional UV-curing process.The possible reaction mechanism occurring in FIPP is demonstrated using density functional theory calculations and spectroscopic investigations.Indeed,the initiation mechanism identified for the FIPP relies on a photochemical pathway rather than an exothermic propagating front forms during the UV-irradiation step as the case with the classical frontal photopolymerization technique.Besides,the FIPP-based in situ cell fabrication using dual initiators is advantageous over both the sandwich cell assembly and conventional in situ photopolymerization in overcoming the limitations of mass transport and active material utilization in high energy and high power LMPBs that use thick electrodes.Furthermore,the LMPB cells fabricated using the in situ-FIPP process with high mass loading LiFePO_(4)electrodes(5.2 mg cm^(-2))demonstrate higher rate capability,and a 50%increase in specific capacity against a sandwich cell encouraging the use of this innovative process in large-scale solid-state battery production.
基金supported by the National Natural Science Foundation of China(22162008,22162007)the Science and Technology Supporting Project of Guizhou Province([2022]208,[2021]480)the Basic Research Program of Science&Technology Department of Guizhou Province([2020]1Y055)。
文摘Interface engineering can improve the charge separation efficiency and inhibit photocorrosion is an emerging direction of developing more efficient and cost-effective photocatalytic systems.Herein,we report the sulfur-confined intimate Cd S intergrown Cd(Cd S/Cd)Ohmic junction(peanut-chocolate-ball like)for high-efficient H2production with superior anti-photocorrosion ability,which was fabricated from in-situ photoreduction of CdS intergrown Cd2SO4(OH)2(CdS/Cd2SO4(OH)2)prepared through a facile space-controlled-solvothermal method.The ratios of CdS/Cd can be effectively controlled by tunning that of CdS/Cd2SO4(OH)2which were prepared by adjusting the volume of reaction liquid and the remaining space of the reactor.Experiments investigations and density functional theory(DFT)calculations reveal that the Cd S intergrown Cd Ohmic junction interfaces(with appropriate content Cd intergrown on Cd S(19.54 wt%))are beneficial in facilitating the transfer of photogenerated electrons by constructing an interfacial electric field and forming sulfur-confined structures for preventing the positive holes(h+)oxidize the Cd S.This contributes to a high photocatalytic H2production activity of 95.40μmol h-1(about 32.3 times higher than bare Cd S)and possesses outstanding photocatalytic stability over 205 h,much longer than most Cd S-based photocatalysts previously reported.The interface engineering design inspired by the structure of peanut-chocolate-ball can greatly promote the future development of catalytic systems for wider application.
基金financially supported by the National Natural Science Foundation of China(No.52377026 and No.52301192)Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202103057)+4 种基金Postdoctoral Fellowship Program of CPSF under Grant Number(No.GZB20240327)Shandong Postdoctoral Science Foundation(No.SDCXZG-202400275)Qingdao Postdoctoral Application Research Project(No.QDBSH20240102023)China Postdoctoral Science Foundation(No.2024M751563)the Qingchuang Talents Induction Program of Shandong Higher Education Institution(Research and Innovation Team of Structural-Functional Polymer Composites).
文摘Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption.However,interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption.In this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal reduction.By utilizing the different properties of different substances,rich heterogeneous interfaces are constructed.This effectively promotes charge transfer and enhances interfacial polarization and conduction loss.The prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy resin.The minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz.Moreover,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces.Therefore,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.
文摘This paper aims at the presentation of an interface to simulate cardiovascular respiratory system. The authors are interested in the resolution of optimal control problem related to the performance of a 30 years old woman. The results show in the most case the determinant parameters of cardiovascular respiratory system reach the equilibrium value due to its controls that is heart rate and alveolar ventilation.
