Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley a...Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.展开更多
In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-b...In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-based alloy(typically pure lead or lead-bismuth eutectic(LBE))is used as the coolant.To clarify the pressure build-up characteristics under water-jet injection,this study conducted several experiments by injecting pressurized water into a molten LBE pool at Sun Yat-sen University.To obtain a further understanding,several new experimental parameters were adopted,including the melt temperature,water subcooling,injection pressure,injection duration,and nozzle diameter.Through detailed analyses,it was found that the pressure and temperature during the water-melt interaction exhibited a consistent variation trend with our previous water-droplet injection mode LBE experiment.Similarly,the existence of a steam explosion was confirmed,which typically results in a much stronger pressure build-up.For the non-explosion cases,increasing the injection pressure,melt-pool temperature,nozzle diameter,and water subcooling promoted pressure build-up in the melt pool.However,a limited enhancement effect was observed when increasing the injection duration,which may be owing to the continually rising pressure in the interaction vessel or the isolation effect of the generated steam cavity.Regardless of whether a steam explosion occurred,the calculated mechanical and kinetic energy conversion efficiencies of the melt were relatively small(not exceeding 4.1%and 0.7%,respectively).Moreover,the range of the conversion efficiency was similar to that of previous water-droplet experiments,although the upper limit of the jet mode was slightly lower.展开更多
In recent decades,capacitive pressure sensors(CPSs)with high sensitivity have demonstrated significant potential in applications such as medical monitoring,artificial intelligence,and soft robotics.Efforts to enhance ...In recent decades,capacitive pressure sensors(CPSs)with high sensitivity have demonstrated significant potential in applications such as medical monitoring,artificial intelligence,and soft robotics.Efforts to enhance this sensitivity have predominantly focused on material design and structural optimization,with surface microstructures such as wrinkles,pyramids,and micro-pillars proving effective.Although finite element modeling(FEM)has guided enhancements in CPS sensitivity across various surface designs,a theoretical understanding of sensitivity improvements remains underexplored.This paper employs sinusoidal wavy surfaces as a representative model to analytically elucidate the underlying mechanisms of sensitivity enhancement through contact mechanics.These theoretical insights are corroborated by FEM and experimental validations.Our findings underscore that optimizing material properties,such as Young’s modulus and relative permittivity,alongside adjustments in surface roughness and substrate thickness,can significantly elevate the sensitivity.The optimal performance is achieved when the amplitude-to-wavelength ratio(H/)is about 0.2.These results offer critical insights for designing ultrasensitive CPS devices,paving the way for advancements in sensor technology.展开更多
BACKGROUND Most patients who were included in previous studies on achalasia had increased lower esophageal sphincter(LES)pressure.Peroral endoscopic myotomy(POEM)has been confirmed to be effective at relieving the cli...BACKGROUND Most patients who were included in previous studies on achalasia had increased lower esophageal sphincter(LES)pressure.Peroral endoscopic myotomy(POEM)has been confirmed to be effective at relieving the clinical symptoms of achalasia associated with increased LES pressure.AIM To identify the safety and efficacy of POEM for patients with normal LES integrated relaxation pressure(LES-IRP).METHODS The clinical data of patients who underwent POEM successfully in The First Medical Center of Chinese PLA General Hospital were retrospectively analyzed.A total of 481 patients who underwent preoperative high-resolution manometry(HRM)at our hospital were ultimately included in this research.According to the HRM results,the patients were divided into two groups:71 patients were included in the normal LES-IRP group(LES-IRP<15 mmHg)and 410 patients were included in the increased LES-IRP group(LES-IRP≥15 mmHg).Clinical characteristics,procedure-related parameters,adverse events,and outcomes were compared between the two groups to evaluate the safety and efficacy of POEM for patients with normal LES-IRP.RESULTS Among the 481 patients included in our study,209 were males and 272 were females,with a mean age of 44.2 years.All patients underwent POEM without severe adverse events.The median pre-treatment Eckardt scores of the normal LES-IRP and increased LES-IRP groups were 7.0 and 7.0(P=0.132),respectively,decreasing to 1.0 and 1.0 post-treatment(P=0.572).The clinical success rate of the normal LES-IRP group was 87.3%(62/71),and that of the increased LES-IRP group was 91.2%(374/410)(P=0.298).Reflux symptoms were measured by the GerdQ questionnaire,and the percentages of patients with GerdQ scores≥9 in the normal LES-IRP and increased LES-IRP groups were 8.5%and 10.7%,respectively(P=0.711).After matching,the rates of clinical success and the rates of GerdQ score≥9 were not significantly different between the two groups.CONCLUSION Our results suggest that POEM is safe and effective for achalasia and patients with normal LES-IRP.In addition,in patients with normal LES-IRP,compared with those with increased LES-IRP,POEM was not associated with a greater incidence of reflux symptoms.展开更多
This study tested the electrical conductivity and pressure sensitivity of lime⁃improved silty sand reinforced with Carbon Fiber Powder(CFP)as the conductive medium.The influence of CFP dosage,moisture content and curi...This study tested the electrical conductivity and pressure sensitivity of lime⁃improved silty sand reinforced with Carbon Fiber Powder(CFP)as the conductive medium.The influence of CFP dosage,moisture content and curing duration on the unconfined compressive strength,initial resistivity and pressure sensitivity of the improved soil was systematically analysed.The results showed that the unconfined compressive strength varied non⁃monotonically with increasing CFP dosage,reaching a peak at a dosage of 1.6%.Furthermore,the initial resistivity showed slight variations under different moisture conditions but eventually converged towards the conductive percolation threshold at a dosage of 2.4%.It is worth noting that CFP reinforced lime⁃improved silty sand(CRLS)exhibit a clear dynamic synchronization of strain with stress and resistivity rate of variation.The pressure sensitivity was optimized with CFP dosages ranging from 1.6%to 2.0%.Both insufficient and excessive dosages had a negative impact on pressure sensitivity.It is important to consider the weakening effect of high moisture content on the pressure sensitivity of the specimens in practical applications.展开更多
The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmosphe...The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.展开更多
Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision p...Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision payoff functions hinge on individual covariates and the choices of their friends.However,peer pressure would be misidentified and induce a non-negligible bias when incomplete covariates are involved in the game model.For this reason,we develop a generalized constant peer effects model based on homogeneity structure in dynamic social networks.The new model can effectively avoid bias through homogeneity pursuit and can be applied to a wider range of scenarios.To estimate peer pressure in the model,we first present two algorithms based on the initialize expand merge method and the polynomial-time twostage method to estimate homogeneity parameters.Then we apply the nested pseudo-likelihood method and obtain consistent estimators of peer pressure.Simulation evaluations show that our proposed methodology can achieve desirable and effective results in terms of the community misclassification rate and parameter estimation error.We also illustrate the advantages of our model in the empirical analysis when compared with a benchmark model.展开更多
The finite volume method was applied to numerically simulate the bottom pressure field induced by regular waves,vehicles in calm water and vehicles in regular waves.The solution of Navier-Stokes(N-S)equations in the v...The finite volume method was applied to numerically simulate the bottom pressure field induced by regular waves,vehicles in calm water and vehicles in regular waves.The solution of Navier-Stokes(N-S)equations in the vicinity of numerical wave tank's boundary was forced towards the wave theoretical solution by incorporating momentum source terms,thereby reducing adverse effects such as wave reflection.Simulations utilizing laminar flow,turbulent flow,and ideal fluid models were all found capable of effectively capturing the waveform and bottom pressure of regular waves,agreeing well with experimental data.In predicting the bottom pressure field of the submerged vehicle,turbulent simulations considering fluid viscosity and boundary layer development provided more accurate predictions for the stern region than inviscid simulations.Due to sphere's diffractive effect,the sphere's bottom pressure field in waves is not a linear superposition of the wave's and the sphere's bottom pressure field.However,a slender submerged vehicle exhibits a weaker diffractive effect on waves,thus the submerged vehicle's bottom pressure field in waves can be approximated as a linear superposition of the wave's and the submerged vehicle's bottom pressure field,which simplifies computation and analysis.展开更多
Background: First responders (firefighters, paramedics, and police) working in an urban setting can be exposed to a high-stress environment caused by strenuous physical exertion, potentially dangerous work conditions,...Background: First responders (firefighters, paramedics, and police) working in an urban setting can be exposed to a high-stress environment caused by strenuous physical exertion, potentially dangerous work conditions, sleep deprivation due to shift work, poor dietary habits, psychological stress and noise levels that are excessive. This may induce chronic increases in blood pressure. The purpose of this study was to determine the presence of hypertension in people working in occupations generally accepted as high stress in comparison to those working in an environment where less of these obvious high stressors were present. Methods: Resting blood pressure was measured by TrUBP in 1067 on-duty first responders (fire, paramedic, and police), and in participants generally associated with a lower-stress work environment (transit workers, city and bank employees, factory workers and legislature employees). Results: The average age, systolic and diastolic blood pressures were significantly lower in those employees working in a high-stress environment than those in a low-stress job. This difference was observed in both male and female sexes. Conclusions: Our data do not support an association of high resting blood pressure values in those employed in activities typically associated with a high-stress urban working environment.展开更多
In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this stu...In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.展开更多
A metal-sensitive diaphragm fiber optic pressure sensor with temperature compensation is developed for pressure monitoring in high-temperature environments,such as engine fuel systems,oil and gas wells,and aviation hy...A metal-sensitive diaphragm fiber optic pressure sensor with temperature compensation is developed for pressure monitoring in high-temperature environments,such as engine fuel systems,oil and gas wells,and aviation hydraulic systems.The sensor combines a metal-sensitive diaphragm and a sapphire wafer to form a temperature-pressure dual Fabry-Perot(FP)interference cavity.A cross-correlation signal demodulation algorithm and a temperature decoupling method are utilized to reduce the influence of temperature crosstalk on pressure measurement.Experimental results show that the maximum nonlinear error of the sensor pressure measurement is 0.75%full scale(FS)and 0.99%FS at room temperature and 300°C,respectively,in a pressure range of 0−10 MPa and 0−1.5 MPa.The sensor’s pressure measurement accuracy is 1.7%FS when using the temperature decoupling method.The sensor exhibits good static pressure characteristics,stability,and reliability,providing an effective solution for high-temperature pressure monitoring applications.展开更多
Background: Tooth loss results in impaired mastication, which in turn, makes it difficult to chew hard food, consequently leading to deteriorate dietary habits and to develop hypertension. The purpose of this study wa...Background: Tooth loss results in impaired mastication, which in turn, makes it difficult to chew hard food, consequently leading to deteriorate dietary habits and to develop hypertension. The purpose of this study was to examine the effect of tooth loss on blood pressure among Congolese population. Methods: A cross-sectional study was conducted from October 2019 until December 2023 among Congolese population aged at least 30 years reporting to the living in DR Congo. All participants were enrolled from Dental Clinic located in the DR Congo. To be eligible to participate in the study, were the willing to participate and having signed informed consent;had a missing tooth;had carried out blood pressure measurement (hypertension/normotensive). The exclusion criteria were determined: being less than 30 years old, being pregnant for women considering the risk of existing gestational hypertension, obesity, excessive alcohol consumption, smoking, and diabetes. Hypertension was defined as the mean of three measurements of systolic blood pressure (SBP) (140 mmHg or higher), diastolic blood pressure (DBP) (90 mm or higher) or physician diagnosed hypertension confirmed from medical records. We determined the number of tooth loss from oral examination. A multivariable logistic regression model was used to investigate the effect of tooth loss on blood pressure. Results: In all, 25,396 participants were enrolled among Congolese population for this study. After oral examination, 13,421 were excluded for no tooth loss and 11,975 participants were selected. The average number of tooth loss among study population was 11.06. Among the participants with hypertension had lost an average of 11 teeth, significantly higher than those without hypertension (6.09) (p = 0.001). After adjusting for covariates (socio-demographic characteristics), tooth loss (>10) was significantly associated with hypertension, with OR = 1.32 (95% CI 1.073 - 2.38). Conclusion: Tooth loss maybe associated with severe hypertension among Congolese population adults. Prevention of tooth loss is very important to the overall health of this population.展开更多
In large-scaleWireless Rechargeable SensorNetworks(WRSN),traditional forward routingmechanisms often lead to reduced energy efficiency.To address this issue,this paper proposes a WRSN node energy optimization algorith...In large-scaleWireless Rechargeable SensorNetworks(WRSN),traditional forward routingmechanisms often lead to reduced energy efficiency.To address this issue,this paper proposes a WRSN node energy optimization algorithm based on regional partitioning and inter-layer routing.The algorithm employs a dynamic clustering radius method and the K-means clustering algorithm to dynamically partition the WRSN area.Then,the cluster head nodes in the outermost layer select an appropriate layer from the next relay routing region and designate it as the relay layer for data transmission.Relay nodes are selected layer by layer,starting from the outermost cluster heads.Finally,the inter-layer routing mechanism is integrated with regional partitioning and clustering methods to develop the WRSN energy optimization algorithm.To further optimize the algorithm’s performance,we conduct parameter optimization experiments on the relay routing selection function,cluster head rotation energy threshold,and inter-layer relay structure selection,ensuring the best configurations for energy efficiency and network lifespan.Based on these optimizations,simulation results demonstrate that the proposed algorithm outperforms traditional forward routing,K-CHRA,and K-CLP algorithms in terms of node mortality rate and energy consumption,extending the number of rounds to 50%node death by 11.9%,19.3%,and 8.3%in a 500-node network,respectively.展开更多
Objective: This study aims to investigate the drainage effect and clinical outcomes of negative pressure chest drainage in patients after two-port thoracoscopic valve surgery, comparing the differences in postoperativ...Objective: This study aims to investigate the drainage effect and clinical outcomes of negative pressure chest drainage in patients after two-port thoracoscopic valve surgery, comparing the differences in postoperative pain, hospital stay, and other factors between the negative pressure group and the control group. Methods: This study is a prospective controlled trial that selected patients undergoing two-port thoracoscopic valve surgery at a certain hospital from January 2019 to December 2024. Patients were randomly assigned to the control group and the negative pressure group using a random number table method. The control group consisted of 30 patients (20 males, 10 females, mean age 42.03 ± 12.89 years), and the negative pressure group consisted of 35 patients (26 males, 9 females, mean age 41.84 ± 11.83 years). The control group received traditional chest drainage, while the negative pressure group received negative pressure chest drainage. Postoperative pain scores, hospital stay, drainage time, number of tube blockages, and incidences of pneumothorax or subcutaneous emphysema were recorded and statistically analyzed. Results: The negative pressure group had a significantly shorter postoperative drainage time compared to the control group (49.09 ± 11.99 hours vs. 79.10 ± 7.32 hours, P < 0.001). The postoperative pain score was lower in the negative pressure group (4.49 ± 1.27 vs. 7.03 ± 0.85, P < 0.001), and the hospital stay was significantly shorter (9.83 ± 1.69 days vs. 14.73 ± 2.32 days, P < 0.001). The incidence of pneumothorax or subcutaneous emphysema was significantly lower in the negative pressure group than in the control group (14.29% vs. 56.67%, P = 0.0003). Conclusion: The application of negative pressure chest drainage in patients after two-port thoracoscopic valve surgery can effectively reduce postoperative pain, shorten hospital stay, and lower the incidence of tube blockage and pneumothorax, demonstrating good clinical outcomes.展开更多
Portal hypertension is a critical determinant of prognosis in chronic liver disease and a key factor in evaluating candidates for liver transplantation.Traditional methods such as hepatic venous pressure gradient(HVPG...Portal hypertension is a critical determinant of prognosis in chronic liver disease and a key factor in evaluating candidates for liver transplantation.Traditional methods such as hepatic venous pressure gradient(HVPG)measurement have long been considered the gold standard for assessing portal pressure.However,these methods are invasive and carry procedural limitations.Recent advances in endoscopic ultrasound(EUS)-guided techniques have emerged as promising alternatives,offering direct and minimally invasive assessment of portal pressure.EUS-guided portal pressure gradient measurement enables real-time evaluation of haemodynamic through direct access to the portal system.This technique has shown to be as accurate as HVPG,and it has some extra benefits,like the ability to take liver biopsies and check collateral circulation all at the same time.Despite these benefits,the technique poses challenges such as operator dependence,proce-dural complexity,and limited standardization across centres.This minireview highlights the evolution of portal pressure measurement,focusing on the potential of EUS-guided techniques in pre-transplant assessment,risk strati-fication,and monitoring therapeutic outcomes.Furthermore,it discusses the technical challenges,clinical implications,and future directions for integrating these innovations into routine practice.Advances in portal pressure measurement hold significant promise for enhancing decision-making and outcomes in liver transplantation.展开更多
Objective: To identify the principal factors associated with the occurrence and development of medical device-related pressure injuries (MDRPI) in adults admitted to hospitals. MDRPI, a peculiar subtype of pressure in...Objective: To identify the principal factors associated with the occurrence and development of medical device-related pressure injuries (MDRPI) in adults admitted to hospitals. MDRPI, a peculiar subtype of pressure injuries (PI), result from the pression exerted by devices (or their fixation systems) applied for diagnostic and therapeutic purposes. MDRPI represent a serious problem for patients and healthcare systems. Understanding potential risk factors is an important step in implementing effective interventions. Methods: In this study, we will perform a systematic review;if possible, also a meta-analysis will be performed. The review will follow the preferred reporting items for systematic reviews and meta-analyses (PRISMA) reporting guidelines for systematic reviews. A rigorous literature search will be conducted both in electronic databases (Medline/PubMed, Embase, CINAHL, Web of Science, Scopus, Cochrane Library) to identify studies published since 2000 and in gray literature for unpublished studies. Pairs of researchers will identify relevant evidence, extract data, and assess risk of bias independently in each eligible study. Factors associated with the occurrence of MDRPI are considered the primary outcome. Secondary outcomes are prevalence and incidence of MDRPI, length of hospital stay, infections, and death. The evidence will be synthesized using the GRADE methodology. Results: Results are not currently available as this is a protocol for a systematic review. Conclusions: This systematic review will identify evidence on risk factors for developing MDRPI. We are confident that the results of this review will help to improve clinical practice and guide future research.展开更多
AIM:To propose a novel glaucoma surgery for rebalancing translaminar pressure difference.METHODS:Three non-human primates with normal eyes and two with laser-induced glaucoma underwent the novel surgical procedure.Can...AIM:To propose a novel glaucoma surgery for rebalancing translaminar pressure difference.METHODS:Three non-human primates with normal eyes and two with laser-induced glaucoma underwent the novel surgical procedure.Cannulation of the subarachnoid space was performed after completion of routine vitrectomy steps.An XEN 45 implant was inserted into the created puncture to communicate between the vitreous body and subarachnoid space.Intraocular pressure(IOP),fundus photography,and spectral-domain optical coherence tomography were assessed at baseline and regular intervals during follow-up.RESULTS:All operated eyes showed IOP reduction in the first postoperative month.Two(2/3)normal eyes and one(1/2)glaucomatous eye maintained lower IOP until 18mo after operation.The XEN 45 implant remained positioned through the lamina cribrosa in all normal eyes but was not detected in two glaucomatous eyes.Complications observed in this study included retinal vascular bleeding in 1/3 normal eyes and XEN implant dislocation in all 2 glaucomatous eyes.CONCLUSION:Subarachnoid space cannulation and mini-shunt implantation may contribute to IOP reduction,possibly by rebalancing translaminar pressure difference and enhancing aqueous humor drainage.The development of a suitable mini-shunt requires further investigation.展开更多
Prediction of water inflow into a tunnel is a crucial prerequisite for the waterproof and drainage design of mountain tunnels in water-rich areas.Based on the proposed Baiyun Mountain Tunnel project in Guangzhou,a num...Prediction of water inflow into a tunnel is a crucial prerequisite for the waterproof and drainage design of mountain tunnels in water-rich areas.Based on the proposed Baiyun Mountain Tunnel project in Guangzhou,a numerical percolation model of random fractured rock of a tunnel underpassing a water reservoir is established to study the seepage characteristics of surrounding rock,the law of water inflow,and the change of lining water pressure,considering the local artificial boundary conditions for seepage in large rock mass,.In addition,the influences of rock permeability,fracture aperture,grouting circle thickness,and penetration are analyzed.The results show that:(1)Only fractures with aperture wider than 0.1 mm can play a significant role in water conduction in rocks with the permeability lower than 10^(-11)m^(2);(2)The greater the permeability difference between the fractures and rocks,the more remarkable the effects of fractures on the surrounding rock seepage field and cavern water inflow;(3)The sensitivity of grouting waterproof function to grouting circle thickness,grouting ring penetration,and rock permeability is significantly higher than that of tunnel buried depth and fracture aperture;(4)The lining water head is much more sensitive to the grouting circle thickness and penetration than to the tunnel buried depth;(5)With the grouting range enlarging,the impact of grouting circle permeability on the precipitation pressure role of the grouting ring increases;(6)For the interesting tunnel designed to be built at the depth of 70 m,the grouting circle with the thickness of 0.5 m and permeability of 10-^(14)m^(2)is recommended.展开更多
Evaluating the pressure of atmospheric pollutant emissions on the atmospheric environment is crucial for effective pollution control and emission reduction policies.This study introduces a novel Atmospheric Environmen...Evaluating the pressure of atmospheric pollutant emissions on the atmospheric environment is crucial for effective pollution control and emission reduction policies.This study introduces a novel Atmospheric Environmental Pressure Index(AEPI)and employs a dynamic comprehensive method to evaluate China’s Atmospheric Environmental Pressure(AEP)across 31 provinces from 2008 to 2017.The drivers of AEP were analyzed using a spatial panel data model,uncovering the integral role of pollution reduction policies,particularly the Air Pollution Prevention and Control Action Plan,which led to a 25%reduction in AEP during its enforcement.Our findings reveal significant spatial disparities in AEP,with higher levels in the Beijing-Tianjin-Hebei and Yangtze River Delta regions.The regression analysis identifies economic development,industrial structure,energy efficiency,environmental regulations,and urbanization as key influencing factors,though their impacts vary across different regions,suggesting the need for region-specific pollution control policies.Furthermore,the shift in the AEP gravity center from2008 to 2017 indicated a southeastward movement,suggesting the necessity to focus air pollution control efforts on the southeast provinces.In conclusion,the AEPI developed in this study enables comparative analysis of AEP across different regions and facilitates the monitoring of long-term trends,which is valuable in guiding regional air pollution control in China.展开更多
By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture defor...By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture deformation on well shut-in afterflow,this study couples the shut-in temperature field model,fracture deformation model,and gas flow model to establish a wellbore pressure calculation model incorporating thermo-hydro-mechanical coupling effects.The research analyzes the governing patterns of geothermal gradient,bottomhole pressure difference,drilling fluid pit gain,and kick index on casing head pressure,and establishes a shut-in pressure determination chart for HPHT wells based on coupled model calculation results.The study results show:geothermal gradient,bottomhole pressure difference,and drilling fluid pit gain exhibit positive correlations with casing head pressure;higher kick indices accelerate pressure rising rates while maintaining a constant maximum casing pressure;validation against field case data demonstrates over 95%accuracy in predicting wellbore pressure recovery after shut-in,with the pressure determination chart achieving 97.2%accuracy in target casing head pressure prediction and 98.3%accuracy in target shut-in time.This method enables accurate acquisition of formation pressure after HPHT well shut-in,providing reliable technical support for subsequent well control measures and ensuring safe and efficient development of deepwater and deep hydrocarbon reservoirs.展开更多
基金supported by the General Program of the National Natural Science Foundation of China(No.52274326)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202109)the Seventh Batch of Ten Thousand Talents Plan of China(No.ZX20220553).
文摘Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.
基金supported by Basic and Applied Basic research foundation of Guangdong province(Nos.2021A1515010343 and 2022A1515011582)the Science and Technology Program of Guangdong Province(Nos.2021A0505030026 and 2022A0505050029).
文摘In the scenario of a steam generator tube rupture accident in a lead-cooled fast reactor,secondary circuit subcooled water under high pressure is injected into an ordinary-pressure primary vessel,where a molten lead-based alloy(typically pure lead or lead-bismuth eutectic(LBE))is used as the coolant.To clarify the pressure build-up characteristics under water-jet injection,this study conducted several experiments by injecting pressurized water into a molten LBE pool at Sun Yat-sen University.To obtain a further understanding,several new experimental parameters were adopted,including the melt temperature,water subcooling,injection pressure,injection duration,and nozzle diameter.Through detailed analyses,it was found that the pressure and temperature during the water-melt interaction exhibited a consistent variation trend with our previous water-droplet injection mode LBE experiment.Similarly,the existence of a steam explosion was confirmed,which typically results in a much stronger pressure build-up.For the non-explosion cases,increasing the injection pressure,melt-pool temperature,nozzle diameter,and water subcooling promoted pressure build-up in the melt pool.However,a limited enhancement effect was observed when increasing the injection duration,which may be owing to the continually rising pressure in the interaction vessel or the isolation effect of the generated steam cavity.Regardless of whether a steam explosion occurred,the calculated mechanical and kinetic energy conversion efficiencies of the melt were relatively small(not exceeding 4.1%and 0.7%,respectively).Moreover,the range of the conversion efficiency was similar to that of previous water-droplet experiments,although the upper limit of the jet mode was slightly lower.
基金supported by the National Natural Science Foundation of China(Grant No.12272369)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0620101).
文摘In recent decades,capacitive pressure sensors(CPSs)with high sensitivity have demonstrated significant potential in applications such as medical monitoring,artificial intelligence,and soft robotics.Efforts to enhance this sensitivity have predominantly focused on material design and structural optimization,with surface microstructures such as wrinkles,pyramids,and micro-pillars proving effective.Although finite element modeling(FEM)has guided enhancements in CPS sensitivity across various surface designs,a theoretical understanding of sensitivity improvements remains underexplored.This paper employs sinusoidal wavy surfaces as a representative model to analytically elucidate the underlying mechanisms of sensitivity enhancement through contact mechanics.These theoretical insights are corroborated by FEM and experimental validations.Our findings underscore that optimizing material properties,such as Young’s modulus and relative permittivity,alongside adjustments in surface roughness and substrate thickness,can significantly elevate the sensitivity.The optimal performance is achieved when the amplitude-to-wavelength ratio(H/)is about 0.2.These results offer critical insights for designing ultrasensitive CPS devices,paving the way for advancements in sensor technology.
文摘BACKGROUND Most patients who were included in previous studies on achalasia had increased lower esophageal sphincter(LES)pressure.Peroral endoscopic myotomy(POEM)has been confirmed to be effective at relieving the clinical symptoms of achalasia associated with increased LES pressure.AIM To identify the safety and efficacy of POEM for patients with normal LES integrated relaxation pressure(LES-IRP).METHODS The clinical data of patients who underwent POEM successfully in The First Medical Center of Chinese PLA General Hospital were retrospectively analyzed.A total of 481 patients who underwent preoperative high-resolution manometry(HRM)at our hospital were ultimately included in this research.According to the HRM results,the patients were divided into two groups:71 patients were included in the normal LES-IRP group(LES-IRP<15 mmHg)and 410 patients were included in the increased LES-IRP group(LES-IRP≥15 mmHg).Clinical characteristics,procedure-related parameters,adverse events,and outcomes were compared between the two groups to evaluate the safety and efficacy of POEM for patients with normal LES-IRP.RESULTS Among the 481 patients included in our study,209 were males and 272 were females,with a mean age of 44.2 years.All patients underwent POEM without severe adverse events.The median pre-treatment Eckardt scores of the normal LES-IRP and increased LES-IRP groups were 7.0 and 7.0(P=0.132),respectively,decreasing to 1.0 and 1.0 post-treatment(P=0.572).The clinical success rate of the normal LES-IRP group was 87.3%(62/71),and that of the increased LES-IRP group was 91.2%(374/410)(P=0.298).Reflux symptoms were measured by the GerdQ questionnaire,and the percentages of patients with GerdQ scores≥9 in the normal LES-IRP and increased LES-IRP groups were 8.5%and 10.7%,respectively(P=0.711).After matching,the rates of clinical success and the rates of GerdQ score≥9 were not significantly different between the two groups.CONCLUSION Our results suggest that POEM is safe and effective for achalasia and patients with normal LES-IRP.In addition,in patients with normal LES-IRP,compared with those with increased LES-IRP,POEM was not associated with a greater incidence of reflux symptoms.
基金Sponsored by Jilin Provincial Department of Education Scientific Research Project(Grant Nos.JJKH20190875KJ,JJKH20230348KJ).
文摘This study tested the electrical conductivity and pressure sensitivity of lime⁃improved silty sand reinforced with Carbon Fiber Powder(CFP)as the conductive medium.The influence of CFP dosage,moisture content and curing duration on the unconfined compressive strength,initial resistivity and pressure sensitivity of the improved soil was systematically analysed.The results showed that the unconfined compressive strength varied non⁃monotonically with increasing CFP dosage,reaching a peak at a dosage of 1.6%.Furthermore,the initial resistivity showed slight variations under different moisture conditions but eventually converged towards the conductive percolation threshold at a dosage of 2.4%.It is worth noting that CFP reinforced lime⁃improved silty sand(CRLS)exhibit a clear dynamic synchronization of strain with stress and resistivity rate of variation.The pressure sensitivity was optimized with CFP dosages ranging from 1.6%to 2.0%.Both insufficient and excessive dosages had a negative impact on pressure sensitivity.It is important to consider the weakening effect of high moisture content on the pressure sensitivity of the specimens in practical applications.
基金supported by the National Natural Science Foundation of China(42304018)the National Natural Science Foundation of China(42330105,42064002,42074035)+3 种基金the Guangxi Natural Science Foundation of China(Guike AD23026177,2020GXNSFBA297145)the Foundation of Guilin University of Technology(GUTQDJJ6616032)Guangxi Key Laboratory of Spatial Information and Geomatics(21238-21-05)the Innovation Project of Guangxi Graduate Education(YCSW2023341)。
文摘The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.
基金supported by the National Nature Science Foundation of China(71771201,72531009,71973001)the USTC Research Funds of the Double First-Class Initiative(FSSF-A-240202).
文摘Social interaction with peer pressure is widely studied in social network analysis.Game theory can be utilized to model dynamic social interaction,and one class of game network models assumes that people’s decision payoff functions hinge on individual covariates and the choices of their friends.However,peer pressure would be misidentified and induce a non-negligible bias when incomplete covariates are involved in the game model.For this reason,we develop a generalized constant peer effects model based on homogeneity structure in dynamic social networks.The new model can effectively avoid bias through homogeneity pursuit and can be applied to a wider range of scenarios.To estimate peer pressure in the model,we first present two algorithms based on the initialize expand merge method and the polynomial-time twostage method to estimate homogeneity parameters.Then we apply the nested pseudo-likelihood method and obtain consistent estimators of peer pressure.Simulation evaluations show that our proposed methodology can achieve desirable and effective results in terms of the community misclassification rate and parameter estimation error.We also illustrate the advantages of our model in the empirical analysis when compared with a benchmark model.
文摘The finite volume method was applied to numerically simulate the bottom pressure field induced by regular waves,vehicles in calm water and vehicles in regular waves.The solution of Navier-Stokes(N-S)equations in the vicinity of numerical wave tank's boundary was forced towards the wave theoretical solution by incorporating momentum source terms,thereby reducing adverse effects such as wave reflection.Simulations utilizing laminar flow,turbulent flow,and ideal fluid models were all found capable of effectively capturing the waveform and bottom pressure of regular waves,agreeing well with experimental data.In predicting the bottom pressure field of the submerged vehicle,turbulent simulations considering fluid viscosity and boundary layer development provided more accurate predictions for the stern region than inviscid simulations.Due to sphere's diffractive effect,the sphere's bottom pressure field in waves is not a linear superposition of the wave's and the sphere's bottom pressure field.However,a slender submerged vehicle exhibits a weaker diffractive effect on waves,thus the submerged vehicle's bottom pressure field in waves can be approximated as a linear superposition of the wave's and the submerged vehicle's bottom pressure field,which simplifies computation and analysis.
文摘Background: First responders (firefighters, paramedics, and police) working in an urban setting can be exposed to a high-stress environment caused by strenuous physical exertion, potentially dangerous work conditions, sleep deprivation due to shift work, poor dietary habits, psychological stress and noise levels that are excessive. This may induce chronic increases in blood pressure. The purpose of this study was to determine the presence of hypertension in people working in occupations generally accepted as high stress in comparison to those working in an environment where less of these obvious high stressors were present. Methods: Resting blood pressure was measured by TrUBP in 1067 on-duty first responders (fire, paramedic, and police), and in participants generally associated with a lower-stress work environment (transit workers, city and bank employees, factory workers and legislature employees). Results: The average age, systolic and diastolic blood pressures were significantly lower in those employees working in a high-stress environment than those in a low-stress job. This difference was observed in both male and female sexes. Conclusions: Our data do not support an association of high resting blood pressure values in those employed in activities typically associated with a high-stress urban working environment.
文摘In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.
文摘A metal-sensitive diaphragm fiber optic pressure sensor with temperature compensation is developed for pressure monitoring in high-temperature environments,such as engine fuel systems,oil and gas wells,and aviation hydraulic systems.The sensor combines a metal-sensitive diaphragm and a sapphire wafer to form a temperature-pressure dual Fabry-Perot(FP)interference cavity.A cross-correlation signal demodulation algorithm and a temperature decoupling method are utilized to reduce the influence of temperature crosstalk on pressure measurement.Experimental results show that the maximum nonlinear error of the sensor pressure measurement is 0.75%full scale(FS)and 0.99%FS at room temperature and 300°C,respectively,in a pressure range of 0−10 MPa and 0−1.5 MPa.The sensor’s pressure measurement accuracy is 1.7%FS when using the temperature decoupling method.The sensor exhibits good static pressure characteristics,stability,and reliability,providing an effective solution for high-temperature pressure monitoring applications.
文摘Background: Tooth loss results in impaired mastication, which in turn, makes it difficult to chew hard food, consequently leading to deteriorate dietary habits and to develop hypertension. The purpose of this study was to examine the effect of tooth loss on blood pressure among Congolese population. Methods: A cross-sectional study was conducted from October 2019 until December 2023 among Congolese population aged at least 30 years reporting to the living in DR Congo. All participants were enrolled from Dental Clinic located in the DR Congo. To be eligible to participate in the study, were the willing to participate and having signed informed consent;had a missing tooth;had carried out blood pressure measurement (hypertension/normotensive). The exclusion criteria were determined: being less than 30 years old, being pregnant for women considering the risk of existing gestational hypertension, obesity, excessive alcohol consumption, smoking, and diabetes. Hypertension was defined as the mean of three measurements of systolic blood pressure (SBP) (140 mmHg or higher), diastolic blood pressure (DBP) (90 mm or higher) or physician diagnosed hypertension confirmed from medical records. We determined the number of tooth loss from oral examination. A multivariable logistic regression model was used to investigate the effect of tooth loss on blood pressure. Results: In all, 25,396 participants were enrolled among Congolese population for this study. After oral examination, 13,421 were excluded for no tooth loss and 11,975 participants were selected. The average number of tooth loss among study population was 11.06. Among the participants with hypertension had lost an average of 11 teeth, significantly higher than those without hypertension (6.09) (p = 0.001). After adjusting for covariates (socio-demographic characteristics), tooth loss (>10) was significantly associated with hypertension, with OR = 1.32 (95% CI 1.073 - 2.38). Conclusion: Tooth loss maybe associated with severe hypertension among Congolese population adults. Prevention of tooth loss is very important to the overall health of this population.
基金funded by National Natural Science Foundation of China(No.61741303)Guangxi Natural Science Foundation(No.2017GXNSFAA198161)the Foundation Project of Guangxi Key Laboratory of Spatial Information and Mapping(No.21-238-21-16).
文摘In large-scaleWireless Rechargeable SensorNetworks(WRSN),traditional forward routingmechanisms often lead to reduced energy efficiency.To address this issue,this paper proposes a WRSN node energy optimization algorithm based on regional partitioning and inter-layer routing.The algorithm employs a dynamic clustering radius method and the K-means clustering algorithm to dynamically partition the WRSN area.Then,the cluster head nodes in the outermost layer select an appropriate layer from the next relay routing region and designate it as the relay layer for data transmission.Relay nodes are selected layer by layer,starting from the outermost cluster heads.Finally,the inter-layer routing mechanism is integrated with regional partitioning and clustering methods to develop the WRSN energy optimization algorithm.To further optimize the algorithm’s performance,we conduct parameter optimization experiments on the relay routing selection function,cluster head rotation energy threshold,and inter-layer relay structure selection,ensuring the best configurations for energy efficiency and network lifespan.Based on these optimizations,simulation results demonstrate that the proposed algorithm outperforms traditional forward routing,K-CHRA,and K-CLP algorithms in terms of node mortality rate and energy consumption,extending the number of rounds to 50%node death by 11.9%,19.3%,and 8.3%in a 500-node network,respectively.
文摘Objective: This study aims to investigate the drainage effect and clinical outcomes of negative pressure chest drainage in patients after two-port thoracoscopic valve surgery, comparing the differences in postoperative pain, hospital stay, and other factors between the negative pressure group and the control group. Methods: This study is a prospective controlled trial that selected patients undergoing two-port thoracoscopic valve surgery at a certain hospital from January 2019 to December 2024. Patients were randomly assigned to the control group and the negative pressure group using a random number table method. The control group consisted of 30 patients (20 males, 10 females, mean age 42.03 ± 12.89 years), and the negative pressure group consisted of 35 patients (26 males, 9 females, mean age 41.84 ± 11.83 years). The control group received traditional chest drainage, while the negative pressure group received negative pressure chest drainage. Postoperative pain scores, hospital stay, drainage time, number of tube blockages, and incidences of pneumothorax or subcutaneous emphysema were recorded and statistically analyzed. Results: The negative pressure group had a significantly shorter postoperative drainage time compared to the control group (49.09 ± 11.99 hours vs. 79.10 ± 7.32 hours, P < 0.001). The postoperative pain score was lower in the negative pressure group (4.49 ± 1.27 vs. 7.03 ± 0.85, P < 0.001), and the hospital stay was significantly shorter (9.83 ± 1.69 days vs. 14.73 ± 2.32 days, P < 0.001). The incidence of pneumothorax or subcutaneous emphysema was significantly lower in the negative pressure group than in the control group (14.29% vs. 56.67%, P = 0.0003). Conclusion: The application of negative pressure chest drainage in patients after two-port thoracoscopic valve surgery can effectively reduce postoperative pain, shorten hospital stay, and lower the incidence of tube blockage and pneumothorax, demonstrating good clinical outcomes.
文摘Portal hypertension is a critical determinant of prognosis in chronic liver disease and a key factor in evaluating candidates for liver transplantation.Traditional methods such as hepatic venous pressure gradient(HVPG)measurement have long been considered the gold standard for assessing portal pressure.However,these methods are invasive and carry procedural limitations.Recent advances in endoscopic ultrasound(EUS)-guided techniques have emerged as promising alternatives,offering direct and minimally invasive assessment of portal pressure.EUS-guided portal pressure gradient measurement enables real-time evaluation of haemodynamic through direct access to the portal system.This technique has shown to be as accurate as HVPG,and it has some extra benefits,like the ability to take liver biopsies and check collateral circulation all at the same time.Despite these benefits,the technique poses challenges such as operator dependence,proce-dural complexity,and limited standardization across centres.This minireview highlights the evolution of portal pressure measurement,focusing on the potential of EUS-guided techniques in pre-transplant assessment,risk strati-fication,and monitoring therapeutic outcomes.Furthermore,it discusses the technical challenges,clinical implications,and future directions for integrating these innovations into routine practice.Advances in portal pressure measurement hold significant promise for enhancing decision-making and outcomes in liver transplantation.
文摘Objective: To identify the principal factors associated with the occurrence and development of medical device-related pressure injuries (MDRPI) in adults admitted to hospitals. MDRPI, a peculiar subtype of pressure injuries (PI), result from the pression exerted by devices (or their fixation systems) applied for diagnostic and therapeutic purposes. MDRPI represent a serious problem for patients and healthcare systems. Understanding potential risk factors is an important step in implementing effective interventions. Methods: In this study, we will perform a systematic review;if possible, also a meta-analysis will be performed. The review will follow the preferred reporting items for systematic reviews and meta-analyses (PRISMA) reporting guidelines for systematic reviews. A rigorous literature search will be conducted both in electronic databases (Medline/PubMed, Embase, CINAHL, Web of Science, Scopus, Cochrane Library) to identify studies published since 2000 and in gray literature for unpublished studies. Pairs of researchers will identify relevant evidence, extract data, and assess risk of bias independently in each eligible study. Factors associated with the occurrence of MDRPI are considered the primary outcome. Secondary outcomes are prevalence and incidence of MDRPI, length of hospital stay, infections, and death. The evidence will be synthesized using the GRADE methodology. Results: Results are not currently available as this is a protocol for a systematic review. Conclusions: This systematic review will identify evidence on risk factors for developing MDRPI. We are confident that the results of this review will help to improve clinical practice and guide future research.
文摘AIM:To propose a novel glaucoma surgery for rebalancing translaminar pressure difference.METHODS:Three non-human primates with normal eyes and two with laser-induced glaucoma underwent the novel surgical procedure.Cannulation of the subarachnoid space was performed after completion of routine vitrectomy steps.An XEN 45 implant was inserted into the created puncture to communicate between the vitreous body and subarachnoid space.Intraocular pressure(IOP),fundus photography,and spectral-domain optical coherence tomography were assessed at baseline and regular intervals during follow-up.RESULTS:All operated eyes showed IOP reduction in the first postoperative month.Two(2/3)normal eyes and one(1/2)glaucomatous eye maintained lower IOP until 18mo after operation.The XEN 45 implant remained positioned through the lamina cribrosa in all normal eyes but was not detected in two glaucomatous eyes.Complications observed in this study included retinal vascular bleeding in 1/3 normal eyes and XEN implant dislocation in all 2 glaucomatous eyes.CONCLUSION:Subarachnoid space cannulation and mini-shunt implantation may contribute to IOP reduction,possibly by rebalancing translaminar pressure difference and enhancing aqueous humor drainage.The development of a suitable mini-shunt requires further investigation.
文摘Prediction of water inflow into a tunnel is a crucial prerequisite for the waterproof and drainage design of mountain tunnels in water-rich areas.Based on the proposed Baiyun Mountain Tunnel project in Guangzhou,a numerical percolation model of random fractured rock of a tunnel underpassing a water reservoir is established to study the seepage characteristics of surrounding rock,the law of water inflow,and the change of lining water pressure,considering the local artificial boundary conditions for seepage in large rock mass,.In addition,the influences of rock permeability,fracture aperture,grouting circle thickness,and penetration are analyzed.The results show that:(1)Only fractures with aperture wider than 0.1 mm can play a significant role in water conduction in rocks with the permeability lower than 10^(-11)m^(2);(2)The greater the permeability difference between the fractures and rocks,the more remarkable the effects of fractures on the surrounding rock seepage field and cavern water inflow;(3)The sensitivity of grouting waterproof function to grouting circle thickness,grouting ring penetration,and rock permeability is significantly higher than that of tunnel buried depth and fracture aperture;(4)The lining water head is much more sensitive to the grouting circle thickness and penetration than to the tunnel buried depth;(5)With the grouting range enlarging,the impact of grouting circle permeability on the precipitation pressure role of the grouting ring increases;(6)For the interesting tunnel designed to be built at the depth of 70 m,the grouting circle with the thickness of 0.5 m and permeability of 10-^(14)m^(2)is recommended.
文摘Evaluating the pressure of atmospheric pollutant emissions on the atmospheric environment is crucial for effective pollution control and emission reduction policies.This study introduces a novel Atmospheric Environmental Pressure Index(AEPI)and employs a dynamic comprehensive method to evaluate China’s Atmospheric Environmental Pressure(AEP)across 31 provinces from 2008 to 2017.The drivers of AEP were analyzed using a spatial panel data model,uncovering the integral role of pollution reduction policies,particularly the Air Pollution Prevention and Control Action Plan,which led to a 25%reduction in AEP during its enforcement.Our findings reveal significant spatial disparities in AEP,with higher levels in the Beijing-Tianjin-Hebei and Yangtze River Delta regions.The regression analysis identifies economic development,industrial structure,energy efficiency,environmental regulations,and urbanization as key influencing factors,though their impacts vary across different regions,suggesting the need for region-specific pollution control policies.Furthermore,the shift in the AEP gravity center from2008 to 2017 indicated a southeastward movement,suggesting the necessity to focus air pollution control efforts on the southeast provinces.In conclusion,the AEPI developed in this study enables comparative analysis of AEP across different regions and facilitates the monitoring of long-term trends,which is valuable in guiding regional air pollution control in China.
基金Supported by the Joint Fund Key Program of the National Natural Science Foundation of China(U21B2069)Key Research and Development Program of Shandong Province(2022CXGC020407)Basic Science Center Program of the National Natural Science Foundation of China(52288101)。
文摘By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture deformation on well shut-in afterflow,this study couples the shut-in temperature field model,fracture deformation model,and gas flow model to establish a wellbore pressure calculation model incorporating thermo-hydro-mechanical coupling effects.The research analyzes the governing patterns of geothermal gradient,bottomhole pressure difference,drilling fluid pit gain,and kick index on casing head pressure,and establishes a shut-in pressure determination chart for HPHT wells based on coupled model calculation results.The study results show:geothermal gradient,bottomhole pressure difference,and drilling fluid pit gain exhibit positive correlations with casing head pressure;higher kick indices accelerate pressure rising rates while maintaining a constant maximum casing pressure;validation against field case data demonstrates over 95%accuracy in predicting wellbore pressure recovery after shut-in,with the pressure determination chart achieving 97.2%accuracy in target casing head pressure prediction and 98.3%accuracy in target shut-in time.This method enables accurate acquisition of formation pressure after HPHT well shut-in,providing reliable technical support for subsequent well control measures and ensuring safe and efficient development of deepwater and deep hydrocarbon reservoirs.
