Typically used thermal insulation materials such as foam insulation and fibreglass may pose notable health risks and environmental impacts thereby resulting in respiratory irritation andwaste disposal issues,respectiv...Typically used thermal insulation materials such as foam insulation and fibreglass may pose notable health risks and environmental impacts thereby resulting in respiratory irritation andwaste disposal issues,respectively.While these materials are affordable and display good thermal insulation,their unsustainable traits pertaining to an intensive manufacturing process and poor disposability are major concerns.Alternative insulation materials with enhanced sustainable characteristics are therefore being explored,and one type of material which has gained notable attention owing to its low carbon footprint and low thermal conductivity is natural fibre.Among the few review studies conducted on Natural Fibre Reinforced Composite(NFRC)insulation boards,the multitude of factors and underlying mechanisms affecting their thermal conductivity performance have been sparsely covered.This review study aimed to address this gap by providing a holistic overview of some of the key intrinsic and extrinsic factors affecting the thermal conductivity performance of NFRCs.Key intrinsic factors pertaining to the microstructural features and to the physico-mechanical traits of NFRCs,namely the fibre lumen size,α,and the fibre-matrix thermal conductivity ratio,β,respectively,were found to largely affect the Transverse Thermal Conductivity(TTC)in NFRC boards.Extrinsic factors,which were found to indirectly affect NFRCs’thermal conductivity,such as fibre pre-processing,composite manufacturing and environmental factors,were also covered.Some of the noteworthy NFRC featureswhich were found to affect their thermal conductivity are volume fraction of fibres,bulk density and porosity.The findings of this study highlight the need for additional research investigation to address the foregoing limitations observed in NFRC thermal insulation boards by considering appropriate natural fibres,composition and fabrication techniques.The fabrication of high-grade NFRC boards,which will display an optimum balance between enhanced thermal insulation and long-term durability performance,could further replace conventionally used thermal insulation boards in the modern building and construction industry.展开更多
Thermally conductive papers with electrical insulation and mechanical robustness are essential for efficient thermal management in modern electronics.In this study,we introduced a metal ion-assisted interfacial crossl...Thermally conductive papers with electrical insulation and mechanical robustness are essential for efficient thermal management in modern electronics.In this study,we introduced a metal ion-assisted interfacial crosslinking strategy to strengthen sugarfunctionalized graphene fluoride(SGF)and cellulose nanofibers(CNF)by hydrogen bonding and metal ion crosslinking that leads to simultaneous enhancements in thermal conductivity and mechanical properties.The facile sugarassisted ball-milling exfoliation method was developed to achieve the exfoliation of graphite fluoride and hydroxyl group functionalization on the surface of graphene fluoride.Thanks to the good dispersibility of the SGF sheets in water,the flexible SGF/CNF composite papers with hydrogen bonding were prepared via vacuum-assisted filtration.We introduced hydrogen bonding and metal ion crosslinking into SGF/CNF papers to obtain densely packed composite papers.Ca^(2+)or Al^(3+)ion-crosslinked SGF/CNF papers exhibited superior thermal and mechanical properties owing to hydrogen bonding and metal ion crosslinking.SGF/CNF-Ca^(2+)and SGF/CNF-Al^(3+)papers at 50 wt%of SGF yield in-plane thermal conductivities of 72.93 and 75.02 W m^(-1) K^(-1),and tensile strengths of 121.5 and 135.7 MPa,respectively.A thermal percolation value was observed at 12.6 vol%of SGF filler content.In addition,the SGF/CNF papers exhibited electrical insulation properties.These remarkable characteristics of the metal ion-crosslinked SGF/CNF papers are attributed to the densely packed structures caused by the strong interfacial interactions from hydrogen bonding as well as metal ion-crosslinking that could promote phonon transport.High-performance metal ion-crosslinked SGF/CNF papers with these fascinating advantages offer great potential for the thermal management of flexible electronics.展开更多
Extreme cold weather seriously harms human thermoregulatory system,necessitating high-performance insulating garments to maintain body temperature.However,as the core insulating layer,advanced fibrous materials always...Extreme cold weather seriously harms human thermoregulatory system,necessitating high-performance insulating garments to maintain body temperature.However,as the core insulating layer,advanced fibrous materials always struggle to balance mechanical properties and thermal insulation,resulting in their inability to meet the demands for both washing resistance and personal protection.Herein,inspired by the natural spring-like structures of cucumber tendrils,a superelastic and washable micro/nanofibrous sponge(MNFS)based on biomimetic helical fibers is directly prepared utilizing multiple-jet electrospinning technology for high-performance thermal insulation.By regulating the conductivity of polyvinylidene fluoride solution,multiple-jet ejection and multiple-stage whipping of jets are achieved,and further control of phase separation rates enables the rapid solidification of jets to form spring-like helical fibers,which are directly entangled to assemble MNFS.The resulting MNFS exhibits superelasticity that can withstand large tensile strain(200%),1000 cyclic tensile or compression deformations,and retain good resilience even in liquid nitrogen(-196℃).Furthermore,the MNFS shows efficient thermal insulation with low thermal conductivity(24.85 mW m^(-1)K^(-1)),close to the value of dry air,and remains structural stability even after cyclic washing.This work offers new possibilities for advanced fibrous sponges in transportation,environmental,and energy applications.展开更多
Outlast Technologies GmbH has been awarded the WTiN Innovate Textile Award in the category Material Innovation for Aersulate®,its aerogel-infused insulation technology.The award honors outstanding achievements in...Outlast Technologies GmbH has been awarded the WTiN Innovate Textile Award in the category Material Innovation for Aersulate®,its aerogel-infused insulation technology.The award honors outstanding achievements in advanced material development and textile innovation.Aersulate® marks a significant advancement in thermal insulation.The technology integrates aerogel,whose highly porous structure efficiently traps air,delivering exceptional thermal performance at extremely low weight and minimal thickness.In AersulateR wadding,aerogel accounts for approximately 50%of the material volume,enabling superior insulation without bulk.展开更多
Ion conduction in covalent-organic framework(COF)membranes is vital for energy conversion and storage.Conventional phenomenological methods based on the Arrhenius equation offer micrometer-scale cognition of ion condu...Ion conduction in covalent-organic framework(COF)membranes is vital for energy conversion and storage.Conventional phenomenological methods based on the Arrhenius equation offer micrometer-scale cognition of ion conduction,whereas they ignore atomic details of ion-pore interactions and sophisticated conduction mechanisms,leaving gaps in high-resolution and bottom-up understanding of ion conduction in a nanoconfined space.In this study,we develop a hierarchical approach by holistically synergizing electronic structure calculations,first-principles molecular dynamics simulations,and thermodynamic integration methods to investigate the conduction of chloride(Cl^(-))and hydroxide(OH^(-))ions in a COF membrane.It is revealed that Cl^(-)ion with symmetric charge distribution undergoes weak solvation and tight ion-pore binding,which results in a tortuous conduction pathway,a high energy barrier,and slow diffusion based on the vehicular mechanism.In remarkable contrast,OH^(-)ion with heterogeneous charge distribution features strong solvation and weak ion-pore binding,and it jumps frequently via a smooth pathway and a low energy barrier.Moreover,OH^(-)ion conduction follows a mixed vehicular and Grotthuss mechanism,causing highly mutable ion identity and number,as well as superior dynamics due to proton transfer.This hierarchical approach provides sub-nanometer resolution insights into ion conduction,guiding intelligent membrane design and performance regulation to control ion conduction for emerging applications.展开更多
The random distribution of one-dimensional nanofillers in composite polymer electrolytes(CPEs) typically results in tortuous ion transport pathways,severely limiting ionic conductivity and Li^(+) flux uniformity.Herei...The random distribution of one-dimensional nanofillers in composite polymer electrolytes(CPEs) typically results in tortuous ion transport pathways,severely limiting ionic conductivity and Li^(+) flux uniformity.Herein,an innovative electric field-assisted strategy is proposed to construct vertically aligned ion channels in CPEs using lithiated halloysite nano tubes(HNTs-SO_(3)Li)embedded within a polyurethane acrylate/polyethylene glycol diacrylate(PUA/PEGDA) matrix.Under an alternating electric field,the nanotubes orient perpendicularly,forming continuous,low-tortuosity pathways that significantly enhance roomtemperature ionic conductivity.The aligned structure not only shortens Li+transport distances but also homogenizes ion flux at the electrode interface,effectively suppressing lithium dendrite growth.Electrochemical characterization reveals exceptional stability.Three-dimensional structural reconstruction and ion transport simulations further demonstrate that the ordered channels promote uniform Li+distribution and faster ion kinetics compared to disordered systems.This study provides a scalable and efficient approach to designing high-performance CPEs for next-generation solid-state batteries,addressing critical challenges in ionic conductivity,interfacial stability,and dendrite suppression.展开更多
An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximatio...An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximation,forming a spectral-integrated neural network(SINN)scheme tailored for problems characterized by long-time evolution.Temporal derivatives are treated through a spectral integration strategy based on orthogonal polynomial expansions,which significantly alleviates stability constraints associated with conventional time-marching schemes.A fully connected neural network is employed to approximate the temperature-related variables,while governing equa-tions and boundary conditions are enforced through a physics-informed loss formulation.Numerical investigations demonstrate that the proposed method maintains high accuracy even when large time steps are adopted,where standard numerical solvers often suffer from instability or excessive computational cost.Moreover,the framework exhibits strong robustness for ultrathin configurations with extreme aspect ratios,achieving relative errors on the order of 10−5 or lower.These results indicate that the SINN framework provides a reliable and efficient alternative for transient thermal analysis of thin-walled structures under challenging computational conditions.展开更多
Polymer dielectrics possessing excellent electrical insulation and high thermal conductivity are pivotal for dielectric capacitors at elevated temperatures.However,the integration of electrical insulation and thermal ...Polymer dielectrics possessing excellent electrical insulation and high thermal conductivity are pivotal for dielectric capacitors at elevated temperatures.However,the integration of electrical insulation and thermal conductivity in polymers remains a challenge.In this work,we present a feasible strategy to integrate high electrical insulation and high thermal conductivity by bonding carbon quantum dots(CQDs)with the diamine monomer of polyetherimide(PEI).The CQDs with Coulomb blockade effect serve as traps for the migrating of electrons in the dielectrics,while the bonding networks formed by CQDs and PEI further deepen the traps and augment trap density.As a result,the hybrid dielectrics(PEI-NH_(2)-CQDs)exhibit nearly an order of magnitude higher electrical resistivity than that of pure PEI,leading to an 80%increase in discharge energy density with an energy efficiency of 90%at 200℃ compared to pure counterpart.Additionally,this all-organic dielectric achieves a significantly increased thermal conductivity of 0.65 W m^(-1) K^(-1) compared to 0.26 W m^(-1) K^(-1) of PEI,which supports its cyclic stability at elevated temperatures.We also demonstrate the kilogram-scale production of CQDs,synthesizing over 8 kg in a single batch,paving the way for large-scale production of reliable PEI-NH_(2)-CQDs dielectrics.展开更多
The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed th...The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed the bio-based electrotechnical epoxy resins based on magnolol.High-performance epoxy resin(DGEMT)with a double crosslinked points and its composites(Al_(2)O_(3)/DGEMT)were obtained taking advantages of the two bifunctional groups(allyl and phenolic hydroxyl groups)of magnolol.Benefitting from the distinctive structure of DGEMT,the Al_(2)O_(3)/DGEMT composites exhibited the advantages of intrinsically high thermal conductivity,high insulation,and low dielectric loss.The AC breakdown strength and thermal conductivity of Al_(2)O_(3)/DGEMT composites were 35.5 kV/mm and 1.19 W·m-1·K-1,respectively,which were 15.6%and 52.6%higher than those of petroleum-based composites(Al_(2)O_(3)/DGEBA).And its dielectric loss tanδ=0.0046 was 20.7%lower than that of Al_(2)O_(3)/DGEBA.Furthermore,the mechanical,thermal and processing properties of Al_(2)O_(3)/DGEMT are fully comparable to those of Al_(2)O_(3)/DGEBA.This work confirms the feasibility of manufacturing environmentally friendly power equipment using bio-based epoxy resins,which has excellent engineering applications.展开更多
The relationship between thermal conductivity and properties of mixing particles is required for quantitative study of heat transfer processes in asphalt-based materials. In this paper, we measured the e？ective ther-...The relationship between thermal conductivity and properties of mixing particles is required for quantitative study of heat transfer processes in asphalt-based materials. In this paper, we measured the e？ective ther- mal conductivity of asphalt-based materials with thermal conduction （graphite） and insulation （cenosphere） powders modification. By taking account of the particle shape, volume fraction, the thermal conductivity of filling particles and base asphalt, we present a new differential effective medium formula to predict the thermal conductivity modification in asphalt-based composite. Our theoretical predications are in good agreement with the experiment data. The new model can be applied for predicting the thermal properties of asphalt-based mixture, which is available for most of thermal modification in two-phase composites.展开更多
In recent years,there has been a growing global demand for carbon neutrality and energy efficiency,which are expected to become long-term trends.In the field of architecture,an effective approach to achieve this is to...In recent years,there has been a growing global demand for carbon neutrality and energy efficiency,which are expected to become long-term trends.In the field of architecture,an effective approach to achieve this is to reduce heat loss in buildings.Vacuum insulation panels(VIPs),a type of high-performance insulation material,have been increasingly utilised in the construction industry and have played an increa-singly important role as their performance and manufacturing processes continue to improve.This paper provides a review of the factors affecting the thermal conductivity of VIPs and presents a detailed overview of the research progress on core materials,barrier films,and getters.The current research status of VIPs is summarised,including their thermal conductivity,service life,and thermal bridging effects,as well as their applications in the field of architecture.This review aims to provide a comprehensive understanding for relevant practitioners on the factors influencing the thermal conductivity of VIPs,and based on which,measures can be taken to produce VIPs with lower thermal conductivity and longer service life.展开更多
Graphene possess extremely high thermal conductivity, and they have been regarded as prominent candidates to be used in thermal management of electronic devices. However, addition of graphene inevitably causes dramati...Graphene possess extremely high thermal conductivity, and they have been regarded as prominent candidates to be used in thermal management of electronic devices. However, addition of graphene inevitably causes dramatic decrease in electrical insulation, which is generally unacceptable for thermal interface materials(TIMs) in real electronic industry. Developing graphene-based nanocomposites with high thermal conductivity and satisfactory electrical insulation is still a challenging issue. In this study,we developed a novel hybrid nanocomposite by incorporating silica-coated graphene nanoplatelets(Silica@GNPs) with polydimethylsiloxane(PDMS) matrix. The obtained Silica@GNP/PDMS composites showed satisfactory electrical insulation(electrical resistivity of over 10^(13)Ωcm) and high thermal conductivity of 0.497 W m-1K-1, increasing by 155% compared with that of neat PDMS, even higher than that of GNP/PDMS composites. Such high thermal conductivity and satisfactory electrical insulation is mainly attributed to the insulating silica-coating, good compatibility between components, strong interfacial bonding, uniform dispersion, and high-efficiency heat transport pathways. There is great potential for the Silica@GNP/PDMS composites to be used as high-performance TIMs in electronic industry.展开更多
In an effort to incorporate the low thermal conductivity of the silica aerogel and the superior structure strength of the xonotlite,a composite material of these two was produced. It was synthesized under vacuum condi...In an effort to incorporate the low thermal conductivity of the silica aerogel and the superior structure strength of the xonotlite,a composite material of these two was produced. It was synthesized under vacuum condition and dried by supercritical drying technique. The thermal conductivity of the new material,which is at 298K with the gas pressure ranging from 1.01×10^5 to 1×10^-2 Pa,was measured using the transient hot-strip method. The mechanism of the low thermal conductivity was studied. The results indicate that the low thermal conductivity mainly results from the significant decrease of gaseous thermal conductivity of the new material due to the restriction of the motion of gas molecules in its fine structures. The formation of the fine structures is because the new material takes the pore structure of the silica aerogel which consists of mainly nanometer-sized pores.展开更多
Due to excellent thermal insulation performance at room temperature and ultralow density,silica aero-gels are candidates for thermal insulation.However,at high temperatures,the thermal insulation prop-erty of silica a...Due to excellent thermal insulation performance at room temperature and ultralow density,silica aero-gels are candidates for thermal insulation.However,at high temperatures,the thermal insulation prop-erty of silica aerogels decreased greatly caused by transparency to heat radiation.Opacifiers introduced into silica sol can block heat radiation yet destroy the uniformity of aerogels.Herein,we designed and prepared a silica aerogel composite with oriented and layered silica fibers(SFs),SiC nanowires(SiC_(NWs)),and silica aerogels,which were prepared by papermaking,chemical vapor infiltration(CVI),and sol-gel respectively.Firstly,oriented and layered SFs made still air a wall to block heat transfer by the solid phase.Secondly,SiC_(NWs) were grown in situ on the surface of SFs evenly to weave into the network,and the network reduced the gaseous thermal conductivity by dividing cracks in SFs/SiC_(NWs)/SA.Thirdly,SiC_(NWs) weakened the heat transfer by radiation at high temperatures.Therefore,SFs/SiC_(NWs)/SA presented remarkable thermal insulation(0.017 W(m K)^(-1) at 25℃,0.0287 W(m K)^(-1) at 500℃,and 0.094 W(m K)^(-1) at 1000℃).Besides,SFs/SiC_(NWs)/SA exhibited remarkable thermal stability(no size transform after being heat treated at 1000℃ for 1800 s)and tensile strength(0.75 MPa).These integrated properties made SFs/SiC_(NWs)/SA a promising candidate for highly efficient thermal insulators.展开更多
As the application scenarios of aerogels expand,higher requirements are put forward for the materials used to prepare aerogels.Due to the unique chemical structure,polytetrafluoroethylene(PTFE)has excellent properties...As the application scenarios of aerogels expand,higher requirements are put forward for the materials used to prepare aerogels.Due to the unique chemical structure,polytetrafluoroethylene(PTFE)has excellent properties such as high-temperature resistance,hydrophobicity,and chemical stability.However,the PTFE aerogels are difficult to be molded due to the weak interaction between resin particles.In this work,poly(ethylene oxide)(PEO)was selected as the carrier to assist the PTFE aerogels molding.The pure PTFE aerogels were prepared by homogeneously mixing PTFE aqueous dispersion and PEO,freeze-drying,and high-temperature sintering.When the mass fraction of PTFE and PEO were appropriate,the porosity of PTFE aerogels exceeded 90%and had a hierarchical honeycomb structure.Results showed that the PTFE aerogels not only had excellent hydrophobicity but also possessed superior acoustic insulation,mechanical strength,thermal insulation,and heat resistance properties.Specifically,the water contact angle is about 140°.The noise reduction coefficient is 0.34 and the average sound absorption coefficient is greater than 88%in the frequency range of 2000-6400 Hz.Meanwhile,the thermal conductivity in the air is about 0.045 W/(m·K),and the initial thermal decomposition temperature is 450℃.More importantly,the PTFE aerogels had excellent temperature and corrosion resistance.Even after extremely thermal and chemical treatment,they remained unchanged porous structure as well as acoustic and thermal insulation properties,which exhibits great potential for application in many harsh environments.展开更多
By using 6,6-((sulfonylbis(4,1-phenylene)bis(azanediyl))bis(thiophen-2-ylm-ethylene))bis6H-di-benzo[c,e][1,2]oxaphosphinine 6-oxide(DOPO-N)as phosphorus-nitrogen flame retardant,the polyurea(PUA)with flame retardant p...By using 6,6-((sulfonylbis(4,1-phenylene)bis(azanediyl))bis(thiophen-2-ylm-ethylene))bis6H-di-benzo[c,e][1,2]oxaphosphinine 6-oxide(DOPO-N)as phosphorus-nitrogen flame retardant,the polyurea(PUA)with flame retardant properties(PUA/DOPO-N)was prepared.In addition,organically modified montmorillonite(OMMT)and magnesium hydroxide(MH)were used as co-effectors respectively,and the flame retardant PUA(PUA/DOPO-N/OMMT and PUA/DOPO-N/MH)were also prepared.Thermal properties,flame retardant properties,flame retardant mechanism and mechanical properties of PUA/DOPO-N,PUA/DOPO-N/OMMT and PUA/DOPO-N/MH were investigated by thermogravimetric(TG)analysis,limiting oxygen index(LOI),UL 94,cone calorimeter test,scanning electron microscopy(SEM),and tensile test.The results show that the LOI value of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are 27.1%,27.7%,and 28.3%,respectively,and UL 94 V-0 rating is attained.Compared with PUA,the peak heat release rate(pk-HRR),total heat release(THR)and average effective heat combustion(av-EHC)of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH decrease significantly.SEM results indicate that the residual chars of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are completer and more compact.The complex of DOPO-N/OMMT and DOPO-N/MH have synergistic flame retardancy.The mechanical properties of PUA can be improved by the addition of DOPO-N,DOPO-N/OMMT and DOPO-N/MH,respectively.The insulation performance test shows that the volume resistivity of PUA/20%DOPO-N is 6.25×10^(16)Ω.cm.Furthermore,by using modified boron nitride(MBN)as heat dissipating material,the complex of PUA/MBN was prepared,and the thermal conductivity of PUA/MBN was investigated.The thermal conductivity of PUA/8%MBN complex coating at room temperature is 0.166 W/(M·K),which is a 163%improvement over pure PUA.展开更多
In the present work,by virtue of the synergistic and independent effects of Janus structure,an asymmetric nickel-chain/multiwall carbon nanotube/polyimide(Ni/MWCNTs/PI)composite foam with absorption-dominated electrom...In the present work,by virtue of the synergistic and independent effects of Janus structure,an asymmetric nickel-chain/multiwall carbon nanotube/polyimide(Ni/MWCNTs/PI)composite foam with absorption-dominated electromagnetic interference(EMI)shielding and thermal insulation performances was successfully fabricated through an ordered casting and directional freeze-drying strategy.Water-soluble polyamic acid(PAA)was chosen to match the oriented freeze-drying method to acquire oriented pores,and the thermal imidization process from PAA to PI exactly eliminated the interface of the multilayered structure.By controlling the electro-magnetic gradient and propagation path of the incident microwaves in the MWCNT/PI and Ni/PI layers,the PI composite foam exhibited an efficient EMI SE of 55.8 dB in the X-band with extremely low reflection characteristics(R=0.22).The asymmetric conductive net-work also greatly preserved the thermal insulation properties of PI.The thermal conductivity(TC)of the Ni/MWCNT/PI composite foam was as low as 0.032 W/(m K).In addition,owing to the elimination of MWCNT/PI and Ni/PI interfaces during the thermal imidization process,the composite foam showed satisfactory compressive strength.The fabricated PI composite foam could provide reliable electromagnetic protection in complex applications and withstand high temperatures,which has great potential in cuttingedge applications such as advanced aircraft.展开更多
With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature...With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature solid-phase&diazonium salt decomposition”method is carried out to prepare benzidine-functionalized boron nitride(m-BN).Subsequently,m-BN/poly(pphenylene benzobisoxazole)nanofiber(PNF)nanocomposite paper with nacremimetic layered structures is prepared via sol–gel film transformation approach.The obtained m-BN/PNF nanocomposite paper with 50 wt%m-BN presents excellent thermal conductivity,incredible electrical insulation,outstanding mechanical properties and thermal stability,due to the construction of extensive hydrogen bonds andπ–πinteractions between m-BN and PNF,and stable nacre-mimetic layered structures.Itsλ∥andλ_(⊥)are 9.68 and 0.84 W m^(-1)K^(-1),and the volume resistivity and breakdown strength are as high as 2.3×10^(15)Ωcm and 324.2 kV mm^(-1),respectively.Besides,it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640°C,showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment.展开更多
Three-dimensional(3D)carbon aerogel with high porosity and lightweight merit has emerged as an important high-performance electromagnetic(EM)absorption material.Despite great progress has been made,most reported 3D ca...Three-dimensional(3D)carbon aerogel with high porosity and lightweight merit has emerged as an important high-performance electromagnetic(EM)absorption material.Despite great progress has been made,most reported 3D carbon aerogels suffer from non-renewability and high cost.Moreover,the randomly distributed porous structure restricts the effective regulation of microwave absorption.Herein,the sustainable shaddock peel cellulose(SPC)was adopted to construct an ultralight and orientated carbon aerogel through a facile bidirectional freezing technique and subsequently thermal treatment process.The resultant carbon aerogel is composed of ordered lamellar layers interconnected by supported bridges,forming a continuous 3D conductive network.Addition of a small amount of graphene oxides(GO)nanosheets in biomass aerogel enhances the interaction of SPC and promotes electron transmission along 3D conductive network.Through tuning the lamellar spacing of aerogel,the as-prepared carbon aerogel achieves a remarkable microwave absorption property with a strong reflection loss(RL)of−63.0 dB and broad effective absorption bandwidth(EAB)of 7.0 GHz under ultralow filler content of 4 wt.%.Moreover,this carbon aerogel also demonstrates excellent thermal insulation property,and is even comparable to commercial products.The present work paves the way for designing low-cost and sustainable biomass-derived carbon aerogel for lightweight and high-performance microwave absorption and infrared stealth function.展开更多
文摘Typically used thermal insulation materials such as foam insulation and fibreglass may pose notable health risks and environmental impacts thereby resulting in respiratory irritation andwaste disposal issues,respectively.While these materials are affordable and display good thermal insulation,their unsustainable traits pertaining to an intensive manufacturing process and poor disposability are major concerns.Alternative insulation materials with enhanced sustainable characteristics are therefore being explored,and one type of material which has gained notable attention owing to its low carbon footprint and low thermal conductivity is natural fibre.Among the few review studies conducted on Natural Fibre Reinforced Composite(NFRC)insulation boards,the multitude of factors and underlying mechanisms affecting their thermal conductivity performance have been sparsely covered.This review study aimed to address this gap by providing a holistic overview of some of the key intrinsic and extrinsic factors affecting the thermal conductivity performance of NFRCs.Key intrinsic factors pertaining to the microstructural features and to the physico-mechanical traits of NFRCs,namely the fibre lumen size,α,and the fibre-matrix thermal conductivity ratio,β,respectively,were found to largely affect the Transverse Thermal Conductivity(TTC)in NFRC boards.Extrinsic factors,which were found to indirectly affect NFRCs’thermal conductivity,such as fibre pre-processing,composite manufacturing and environmental factors,were also covered.Some of the noteworthy NFRC featureswhich were found to affect their thermal conductivity are volume fraction of fibres,bulk density and porosity.The findings of this study highlight the need for additional research investigation to address the foregoing limitations observed in NFRC thermal insulation boards by considering appropriate natural fibres,composition and fabrication techniques.The fabrication of high-grade NFRC boards,which will display an optimum balance between enhanced thermal insulation and long-term durability performance,could further replace conventionally used thermal insulation boards in the modern building and construction industry.
基金supported by the Basic Science Program(No.2022R1A2C2009700)through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICTthe Basic Science Research Capacity Enhancement Project(National Research Facilities and Equipment Center)through the Korea Ba-sic Science Institute funded by the Ministry of Education(No.2019R1A6C1010047)the Industrial Strategic Technology Development Program(No.20013248)through Korea Evaluation In-stitute of Industrial Technology funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea).
文摘Thermally conductive papers with electrical insulation and mechanical robustness are essential for efficient thermal management in modern electronics.In this study,we introduced a metal ion-assisted interfacial crosslinking strategy to strengthen sugarfunctionalized graphene fluoride(SGF)and cellulose nanofibers(CNF)by hydrogen bonding and metal ion crosslinking that leads to simultaneous enhancements in thermal conductivity and mechanical properties.The facile sugarassisted ball-milling exfoliation method was developed to achieve the exfoliation of graphite fluoride and hydroxyl group functionalization on the surface of graphene fluoride.Thanks to the good dispersibility of the SGF sheets in water,the flexible SGF/CNF composite papers with hydrogen bonding were prepared via vacuum-assisted filtration.We introduced hydrogen bonding and metal ion crosslinking into SGF/CNF papers to obtain densely packed composite papers.Ca^(2+)or Al^(3+)ion-crosslinked SGF/CNF papers exhibited superior thermal and mechanical properties owing to hydrogen bonding and metal ion crosslinking.SGF/CNF-Ca^(2+)and SGF/CNF-Al^(3+)papers at 50 wt%of SGF yield in-plane thermal conductivities of 72.93 and 75.02 W m^(-1) K^(-1),and tensile strengths of 121.5 and 135.7 MPa,respectively.A thermal percolation value was observed at 12.6 vol%of SGF filler content.In addition,the SGF/CNF papers exhibited electrical insulation properties.These remarkable characteristics of the metal ion-crosslinked SGF/CNF papers are attributed to the densely packed structures caused by the strong interfacial interactions from hydrogen bonding as well as metal ion-crosslinking that could promote phonon transport.High-performance metal ion-crosslinked SGF/CNF papers with these fascinating advantages offer great potential for the thermal management of flexible electronics.
基金supported by Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2022QNRC001)the National Natural Science Foundation of China(No.52273053)the Chenguang Program of Shanghai Education Development Foundation and Shanghai Municipal Education Commission(No.21CGA41)。
文摘Extreme cold weather seriously harms human thermoregulatory system,necessitating high-performance insulating garments to maintain body temperature.However,as the core insulating layer,advanced fibrous materials always struggle to balance mechanical properties and thermal insulation,resulting in their inability to meet the demands for both washing resistance and personal protection.Herein,inspired by the natural spring-like structures of cucumber tendrils,a superelastic and washable micro/nanofibrous sponge(MNFS)based on biomimetic helical fibers is directly prepared utilizing multiple-jet electrospinning technology for high-performance thermal insulation.By regulating the conductivity of polyvinylidene fluoride solution,multiple-jet ejection and multiple-stage whipping of jets are achieved,and further control of phase separation rates enables the rapid solidification of jets to form spring-like helical fibers,which are directly entangled to assemble MNFS.The resulting MNFS exhibits superelasticity that can withstand large tensile strain(200%),1000 cyclic tensile or compression deformations,and retain good resilience even in liquid nitrogen(-196℃).Furthermore,the MNFS shows efficient thermal insulation with low thermal conductivity(24.85 mW m^(-1)K^(-1)),close to the value of dry air,and remains structural stability even after cyclic washing.This work offers new possibilities for advanced fibrous sponges in transportation,environmental,and energy applications.
文摘Outlast Technologies GmbH has been awarded the WTiN Innovate Textile Award in the category Material Innovation for Aersulate®,its aerogel-infused insulation technology.The award honors outstanding achievements in advanced material development and textile innovation.Aersulate® marks a significant advancement in thermal insulation.The technology integrates aerogel,whose highly porous structure efficiently traps air,delivering exceptional thermal performance at extremely low weight and minimal thickness.In AersulateR wadding,aerogel accounts for approximately 50%of the material volume,enabling superior insulation without bulk.
基金supported by the National Science Foundation for Distinguished Young Scholars,China(No.52025065)the Key Research and Development Program of Shaanxi,China(No.2023GXLH-016)+3 种基金A*STAR LCER-FI,Singapore projects(LCERFI010015 U2102d2004 and LCERFI01-0033 U2102d2006)the National Research Foundation Singapore(NRF-CRP26-2021RS0002)the China Scholarship Council Program,China(Project ID:202306280178)for financial supportthe support of the Computing Center in Xi’an。
文摘Ion conduction in covalent-organic framework(COF)membranes is vital for energy conversion and storage.Conventional phenomenological methods based on the Arrhenius equation offer micrometer-scale cognition of ion conduction,whereas they ignore atomic details of ion-pore interactions and sophisticated conduction mechanisms,leaving gaps in high-resolution and bottom-up understanding of ion conduction in a nanoconfined space.In this study,we develop a hierarchical approach by holistically synergizing electronic structure calculations,first-principles molecular dynamics simulations,and thermodynamic integration methods to investigate the conduction of chloride(Cl^(-))and hydroxide(OH^(-))ions in a COF membrane.It is revealed that Cl^(-)ion with symmetric charge distribution undergoes weak solvation and tight ion-pore binding,which results in a tortuous conduction pathway,a high energy barrier,and slow diffusion based on the vehicular mechanism.In remarkable contrast,OH^(-)ion with heterogeneous charge distribution features strong solvation and weak ion-pore binding,and it jumps frequently via a smooth pathway and a low energy barrier.Moreover,OH^(-)ion conduction follows a mixed vehicular and Grotthuss mechanism,causing highly mutable ion identity and number,as well as superior dynamics due to proton transfer.This hierarchical approach provides sub-nanometer resolution insights into ion conduction,guiding intelligent membrane design and performance regulation to control ion conduction for emerging applications.
基金the Program of National Key Research and Development of China (No.2022YFB3603702, No. 2023YFC3905301)Hubei Provincial Natural Science Foundation of China (No. 2025AFA025)the Research Fund of Jianghan University (No. 2023KJZX01)。
文摘The random distribution of one-dimensional nanofillers in composite polymer electrolytes(CPEs) typically results in tortuous ion transport pathways,severely limiting ionic conductivity and Li^(+) flux uniformity.Herein,an innovative electric field-assisted strategy is proposed to construct vertically aligned ion channels in CPEs using lithiated halloysite nano tubes(HNTs-SO_(3)Li)embedded within a polyurethane acrylate/polyethylene glycol diacrylate(PUA/PEGDA) matrix.Under an alternating electric field,the nanotubes orient perpendicularly,forming continuous,low-tortuosity pathways that significantly enhance roomtemperature ionic conductivity.The aligned structure not only shortens Li+transport distances but also homogenizes ion flux at the electrode interface,effectively suppressing lithium dendrite growth.Electrochemical characterization reveals exceptional stability.Three-dimensional structural reconstruction and ion transport simulations further demonstrate that the ordered channels promote uniform Li+distribution and faster ion kinetics compared to disordered systems.This study provides a scalable and efficient approach to designing high-performance CPEs for next-generation solid-state batteries,addressing critical challenges in ionic conductivity,interfacial stability,and dendrite suppression.
基金supported by the National Natural Science Foundation of China(Nos.12422207 and 12372199).
文摘An efficient data-driven numerical framework is developed for transient heat conduction analysis in thin-walled structures.The proposed approach integrates spectral time discretization with neural network approximation,forming a spectral-integrated neural network(SINN)scheme tailored for problems characterized by long-time evolution.Temporal derivatives are treated through a spectral integration strategy based on orthogonal polynomial expansions,which significantly alleviates stability constraints associated with conventional time-marching schemes.A fully connected neural network is employed to approximate the temperature-related variables,while governing equa-tions and boundary conditions are enforced through a physics-informed loss formulation.Numerical investigations demonstrate that the proposed method maintains high accuracy even when large time steps are adopted,where standard numerical solvers often suffer from instability or excessive computational cost.Moreover,the framework exhibits strong robustness for ultrathin configurations with extreme aspect ratios,achieving relative errors on the order of 10−5 or lower.These results indicate that the SINN framework provides a reliable and efficient alternative for transient thermal analysis of thin-walled structures under challenging computational conditions.
基金supported by the National Natural Science Foundation of China(52172265)Excellent Youth Science Foundation of Hunan Province(2022JJ20067)+1 种基金The Science and Technology Innovation Program of Hunan Province(2022RC1074)Central South University Innovation-Driven Research Program(2023CXQD010).
文摘Polymer dielectrics possessing excellent electrical insulation and high thermal conductivity are pivotal for dielectric capacitors at elevated temperatures.However,the integration of electrical insulation and thermal conductivity in polymers remains a challenge.In this work,we present a feasible strategy to integrate high electrical insulation and high thermal conductivity by bonding carbon quantum dots(CQDs)with the diamine monomer of polyetherimide(PEI).The CQDs with Coulomb blockade effect serve as traps for the migrating of electrons in the dielectrics,while the bonding networks formed by CQDs and PEI further deepen the traps and augment trap density.As a result,the hybrid dielectrics(PEI-NH_(2)-CQDs)exhibit nearly an order of magnitude higher electrical resistivity than that of pure PEI,leading to an 80%increase in discharge energy density with an energy efficiency of 90%at 200℃ compared to pure counterpart.Additionally,this all-organic dielectric achieves a significantly increased thermal conductivity of 0.65 W m^(-1) K^(-1) compared to 0.26 W m^(-1) K^(-1) of PEI,which supports its cyclic stability at elevated temperatures.We also demonstrate the kilogram-scale production of CQDs,synthesizing over 8 kg in a single batch,paving the way for large-scale production of reliable PEI-NH_(2)-CQDs dielectrics.
基金supported by the China Postdoctoral Science Foundation(No.2023M743622)Natural Science Foundation of Ningbo City(No.2024J109)+2 种基金National Natural Science Foundation of China(Nos.E52307038 and U23A20589)Ningbo 2025 Key Scientific Research Programs(Nos.2022Z111,2022Z160 and 2022Z198)the Leading Innovativeand Entrepreneur Team Introduction Program of Zhejiang(No.2021R01005).
文摘The demand for energy-efficient and environmental-friendly power grid construction has made the exploitation of bio-based electrical epoxy resins with excellent properties increasingly important.This work developed the bio-based electrotechnical epoxy resins based on magnolol.High-performance epoxy resin(DGEMT)with a double crosslinked points and its composites(Al_(2)O_(3)/DGEMT)were obtained taking advantages of the two bifunctional groups(allyl and phenolic hydroxyl groups)of magnolol.Benefitting from the distinctive structure of DGEMT,the Al_(2)O_(3)/DGEMT composites exhibited the advantages of intrinsically high thermal conductivity,high insulation,and low dielectric loss.The AC breakdown strength and thermal conductivity of Al_(2)O_(3)/DGEMT composites were 35.5 kV/mm and 1.19 W·m-1·K-1,respectively,which were 15.6%and 52.6%higher than those of petroleum-based composites(Al_(2)O_(3)/DGEBA).And its dielectric loss tanδ=0.0046 was 20.7%lower than that of Al_(2)O_(3)/DGEBA.Furthermore,the mechanical,thermal and processing properties of Al_(2)O_(3)/DGEMT are fully comparable to those of Al_(2)O_(3)/DGEBA.This work confirms the feasibility of manufacturing environmentally friendly power equipment using bio-based epoxy resins,which has excellent engineering applications.
基金supported by the National Natural Science Foundation of China under grants Nos. 50906073 and 50973018
文摘The relationship between thermal conductivity and properties of mixing particles is required for quantitative study of heat transfer processes in asphalt-based materials. In this paper, we measured the e？ective ther- mal conductivity of asphalt-based materials with thermal conduction （graphite） and insulation （cenosphere） powders modification. By taking account of the particle shape, volume fraction, the thermal conductivity of filling particles and base asphalt, we present a new differential effective medium formula to predict the thermal conductivity modification in asphalt-based composite. Our theoretical predications are in good agreement with the experiment data. The new model can be applied for predicting the thermal properties of asphalt-based mixture, which is available for most of thermal modification in two-phase composites.
文摘In recent years,there has been a growing global demand for carbon neutrality and energy efficiency,which are expected to become long-term trends.In the field of architecture,an effective approach to achieve this is to reduce heat loss in buildings.Vacuum insulation panels(VIPs),a type of high-performance insulation material,have been increasingly utilised in the construction industry and have played an increa-singly important role as their performance and manufacturing processes continue to improve.This paper provides a review of the factors affecting the thermal conductivity of VIPs and presents a detailed overview of the research progress on core materials,barrier films,and getters.The current research status of VIPs is summarised,including their thermal conductivity,service life,and thermal bridging effects,as well as their applications in the field of architecture.This review aims to provide a comprehensive understanding for relevant practitioners on the factors influencing the thermal conductivity of VIPs,and based on which,measures can be taken to produce VIPs with lower thermal conductivity and longer service life.
基金the financial support from the Ministry of Science and Technology of China(No.2012AA030303)the Department of Science and Technology of Shenyang City(No.17-231-1-66)+2 种基金the Hundred Talents Program of Chinese Academy of Sciences(No.CAS2012)the Fund for Creative Research Groups(No.51221264)the Fund of Shenyang National Laboratory for Materials Science(Nos.2015RP13 and2017RP11)
文摘Graphene possess extremely high thermal conductivity, and they have been regarded as prominent candidates to be used in thermal management of electronic devices. However, addition of graphene inevitably causes dramatic decrease in electrical insulation, which is generally unacceptable for thermal interface materials(TIMs) in real electronic industry. Developing graphene-based nanocomposites with high thermal conductivity and satisfactory electrical insulation is still a challenging issue. In this study,we developed a novel hybrid nanocomposite by incorporating silica-coated graphene nanoplatelets(Silica@GNPs) with polydimethylsiloxane(PDMS) matrix. The obtained Silica@GNP/PDMS composites showed satisfactory electrical insulation(electrical resistivity of over 10^(13)Ωcm) and high thermal conductivity of 0.497 W m-1K-1, increasing by 155% compared with that of neat PDMS, even higher than that of GNP/PDMS composites. Such high thermal conductivity and satisfactory electrical insulation is mainly attributed to the insulating silica-coating, good compatibility between components, strong interfacial bonding, uniform dispersion, and high-efficiency heat transport pathways. There is great potential for the Silica@GNP/PDMS composites to be used as high-performance TIMs in electronic industry.
基金the National High-Technology Research and Development Program of China (863 Program No2003AA302610)
文摘In an effort to incorporate the low thermal conductivity of the silica aerogel and the superior structure strength of the xonotlite,a composite material of these two was produced. It was synthesized under vacuum condition and dried by supercritical drying technique. The thermal conductivity of the new material,which is at 298K with the gas pressure ranging from 1.01×10^5 to 1×10^-2 Pa,was measured using the transient hot-strip method. The mechanism of the low thermal conductivity was studied. The results indicate that the low thermal conductivity mainly results from the significant decrease of gaseous thermal conductivity of the new material due to the restriction of the motion of gas molecules in its fine structures. The formation of the fine structures is because the new material takes the pore structure of the silica aerogel which consists of mainly nanometer-sized pores.
基金supported by the National Natural Science Foun-dation of China(Grant No.U2167214).
文摘Due to excellent thermal insulation performance at room temperature and ultralow density,silica aero-gels are candidates for thermal insulation.However,at high temperatures,the thermal insulation prop-erty of silica aerogels decreased greatly caused by transparency to heat radiation.Opacifiers introduced into silica sol can block heat radiation yet destroy the uniformity of aerogels.Herein,we designed and prepared a silica aerogel composite with oriented and layered silica fibers(SFs),SiC nanowires(SiC_(NWs)),and silica aerogels,which were prepared by papermaking,chemical vapor infiltration(CVI),and sol-gel respectively.Firstly,oriented and layered SFs made still air a wall to block heat transfer by the solid phase.Secondly,SiC_(NWs) were grown in situ on the surface of SFs evenly to weave into the network,and the network reduced the gaseous thermal conductivity by dividing cracks in SFs/SiC_(NWs)/SA.Thirdly,SiC_(NWs) weakened the heat transfer by radiation at high temperatures.Therefore,SFs/SiC_(NWs)/SA presented remarkable thermal insulation(0.017 W(m K)^(-1) at 25℃,0.0287 W(m K)^(-1) at 500℃,and 0.094 W(m K)^(-1) at 1000℃).Besides,SFs/SiC_(NWs)/SA exhibited remarkable thermal stability(no size transform after being heat treated at 1000℃ for 1800 s)and tensile strength(0.75 MPa).These integrated properties made SFs/SiC_(NWs)/SA a promising candidate for highly efficient thermal insulators.
基金supported by the National Natural Science Foundation of China(No.52233003)the Department of Sichuan Province(No.2022JDJQ0023)。
文摘As the application scenarios of aerogels expand,higher requirements are put forward for the materials used to prepare aerogels.Due to the unique chemical structure,polytetrafluoroethylene(PTFE)has excellent properties such as high-temperature resistance,hydrophobicity,and chemical stability.However,the PTFE aerogels are difficult to be molded due to the weak interaction between resin particles.In this work,poly(ethylene oxide)(PEO)was selected as the carrier to assist the PTFE aerogels molding.The pure PTFE aerogels were prepared by homogeneously mixing PTFE aqueous dispersion and PEO,freeze-drying,and high-temperature sintering.When the mass fraction of PTFE and PEO were appropriate,the porosity of PTFE aerogels exceeded 90%and had a hierarchical honeycomb structure.Results showed that the PTFE aerogels not only had excellent hydrophobicity but also possessed superior acoustic insulation,mechanical strength,thermal insulation,and heat resistance properties.Specifically,the water contact angle is about 140°.The noise reduction coefficient is 0.34 and the average sound absorption coefficient is greater than 88%in the frequency range of 2000-6400 Hz.Meanwhile,the thermal conductivity in the air is about 0.045 W/(m·K),and the initial thermal decomposition temperature is 450℃.More importantly,the PTFE aerogels had excellent temperature and corrosion resistance.Even after extremely thermal and chemical treatment,they remained unchanged porous structure as well as acoustic and thermal insulation properties,which exhibits great potential for application in many harsh environments.
基金Funded by the Natural Science Foundation of Guangdong(Nos.2014A030313241,2014B090901068,and 2016A010103003)。
文摘By using 6,6-((sulfonylbis(4,1-phenylene)bis(azanediyl))bis(thiophen-2-ylm-ethylene))bis6H-di-benzo[c,e][1,2]oxaphosphinine 6-oxide(DOPO-N)as phosphorus-nitrogen flame retardant,the polyurea(PUA)with flame retardant properties(PUA/DOPO-N)was prepared.In addition,organically modified montmorillonite(OMMT)and magnesium hydroxide(MH)were used as co-effectors respectively,and the flame retardant PUA(PUA/DOPO-N/OMMT and PUA/DOPO-N/MH)were also prepared.Thermal properties,flame retardant properties,flame retardant mechanism and mechanical properties of PUA/DOPO-N,PUA/DOPO-N/OMMT and PUA/DOPO-N/MH were investigated by thermogravimetric(TG)analysis,limiting oxygen index(LOI),UL 94,cone calorimeter test,scanning electron microscopy(SEM),and tensile test.The results show that the LOI value of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are 27.1%,27.7%,and 28.3%,respectively,and UL 94 V-0 rating is attained.Compared with PUA,the peak heat release rate(pk-HRR),total heat release(THR)and average effective heat combustion(av-EHC)of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH decrease significantly.SEM results indicate that the residual chars of PUA/20%DOPO-N,PUA/18%DOPO-N/2%OMMT and PUA/15%DOPO-N/5%MH are completer and more compact.The complex of DOPO-N/OMMT and DOPO-N/MH have synergistic flame retardancy.The mechanical properties of PUA can be improved by the addition of DOPO-N,DOPO-N/OMMT and DOPO-N/MH,respectively.The insulation performance test shows that the volume resistivity of PUA/20%DOPO-N is 6.25×10^(16)Ω.cm.Furthermore,by using modified boron nitride(MBN)as heat dissipating material,the complex of PUA/MBN was prepared,and the thermal conductivity of PUA/MBN was investigated.The thermal conductivity of PUA/8%MBN complex coating at room temperature is 0.166 W/(M·K),which is a 163%improvement over pure PUA.
基金supported by the Natural Science Foundation of Shanxi Province(Nos.20210302123015 and 20210302123035)the Opening Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University)(No.sklpme2022-4-06)the Open Foundation of China-Belarus Belt and Road Joint Laboratory on Electromagnetic Environment Effect(No.ZBKF2022030301).
文摘In the present work,by virtue of the synergistic and independent effects of Janus structure,an asymmetric nickel-chain/multiwall carbon nanotube/polyimide(Ni/MWCNTs/PI)composite foam with absorption-dominated electromagnetic interference(EMI)shielding and thermal insulation performances was successfully fabricated through an ordered casting and directional freeze-drying strategy.Water-soluble polyamic acid(PAA)was chosen to match the oriented freeze-drying method to acquire oriented pores,and the thermal imidization process from PAA to PI exactly eliminated the interface of the multilayered structure.By controlling the electro-magnetic gradient and propagation path of the incident microwaves in the MWCNT/PI and Ni/PI layers,the PI composite foam exhibited an efficient EMI SE of 55.8 dB in the X-band with extremely low reflection characteristics(R=0.22).The asymmetric conductive net-work also greatly preserved the thermal insulation properties of PI.The thermal conductivity(TC)of the Ni/MWCNT/PI composite foam was as low as 0.032 W/(m K).In addition,owing to the elimination of MWCNT/PI and Ni/PI interfaces during the thermal imidization process,the composite foam showed satisfactory compressive strength.The fabricated PI composite foam could provide reliable electromagnetic protection in complex applications and withstand high temperatures,which has great potential in cuttingedge applications such as advanced aircraft.
基金The authors are grateful for the support and funding from the Foundation of National Natural Science Foundation of China(52373089 and 51973173)Startup Foundation of Chongqing Normal University(23XLB011),Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202300561)Fundamental Research Funds for the Central Universities。
文摘With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature solid-phase&diazonium salt decomposition”method is carried out to prepare benzidine-functionalized boron nitride(m-BN).Subsequently,m-BN/poly(pphenylene benzobisoxazole)nanofiber(PNF)nanocomposite paper with nacremimetic layered structures is prepared via sol–gel film transformation approach.The obtained m-BN/PNF nanocomposite paper with 50 wt%m-BN presents excellent thermal conductivity,incredible electrical insulation,outstanding mechanical properties and thermal stability,due to the construction of extensive hydrogen bonds andπ–πinteractions between m-BN and PNF,and stable nacre-mimetic layered structures.Itsλ∥andλ_(⊥)are 9.68 and 0.84 W m^(-1)K^(-1),and the volume resistivity and breakdown strength are as high as 2.3×10^(15)Ωcm and 324.2 kV mm^(-1),respectively.Besides,it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640°C,showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment.
基金financially supported by the National Natural Science Foundation of China(Nos.52302110,52231007,52301236,12327804,T2321003,and 22088101)the Shanghai Pujiang Pro-gram(No.22PJ1401000)the“Start-up Fund”provided by Xi’an Technological University(No.0853/302020646).
文摘Three-dimensional(3D)carbon aerogel with high porosity and lightweight merit has emerged as an important high-performance electromagnetic(EM)absorption material.Despite great progress has been made,most reported 3D carbon aerogels suffer from non-renewability and high cost.Moreover,the randomly distributed porous structure restricts the effective regulation of microwave absorption.Herein,the sustainable shaddock peel cellulose(SPC)was adopted to construct an ultralight and orientated carbon aerogel through a facile bidirectional freezing technique and subsequently thermal treatment process.The resultant carbon aerogel is composed of ordered lamellar layers interconnected by supported bridges,forming a continuous 3D conductive network.Addition of a small amount of graphene oxides(GO)nanosheets in biomass aerogel enhances the interaction of SPC and promotes electron transmission along 3D conductive network.Through tuning the lamellar spacing of aerogel,the as-prepared carbon aerogel achieves a remarkable microwave absorption property with a strong reflection loss(RL)of−63.0 dB and broad effective absorption bandwidth(EAB)of 7.0 GHz under ultralow filler content of 4 wt.%.Moreover,this carbon aerogel also demonstrates excellent thermal insulation property,and is even comparable to commercial products.The present work paves the way for designing low-cost and sustainable biomass-derived carbon aerogel for lightweight and high-performance microwave absorption and infrared stealth function.
