在高精度平面干涉仪系统评价标准中,仪器传递函数(Instrument Transfer Function,ITF)已经逐渐成为干涉仪性能的重要评价指标,它准确地反映了光学系统对于测量形貌不同空间频率的分辨能力。然而,ITF测试过程中的实验环境要求较为严格,...在高精度平面干涉仪系统评价标准中,仪器传递函数(Instrument Transfer Function,ITF)已经逐渐成为干涉仪性能的重要评价指标,它准确地反映了光学系统对于测量形貌不同空间频率的分辨能力。然而,ITF测试过程中的实验环境要求较为严格,干涉仪系统噪声会导致测试结果产生较大失真。为了能够准确表征干涉仪系统的性能,通过仿真分析与实际实验结合的方式,将仿真干涉图引入不同量级的高斯随机噪声,探究了噪声对于ITF测试结果的影响,提出测试误差的评价指标ITF_(RMS)值,分析了干涉仪系统的噪声容限,依据评价指标提出了几种不同的ITF测试优化方法,并搭建实验系统进行分析验证。实验结果表明,在未优化的ITF测试流程中,所搭建的干涉仪系统ITF测试的ITF_(RMS)值为0.1112,而优化后同样噪声量级的干涉仪系统所得ITF_(RMS)值则分别降至0.0693,0.0367,0.0579。此结果证明了优化方案的可行性,该方案能有效抑制干涉仪系统ITF测试过程中的噪声干扰影响。展开更多
由于仪器传递函数(Instrument Transfer Function,ITF)能准确反映仪器在空间频率上的响应特征,被广泛应用于仪器规范之中。目前多采用刻有单一台阶特征或不同周期正弦特征的平面测试板对干涉仪的ITF进行检测。针对平面测试板无法完成高...由于仪器传递函数(Instrument Transfer Function,ITF)能准确反映仪器在空间频率上的响应特征,被广泛应用于仪器规范之中。目前多采用刻有单一台阶特征或不同周期正弦特征的平面测试板对干涉仪的ITF进行检测。针对平面测试板无法完成高陡度球面/非球面镜检测时ITF标定的问题,提出了根据球面台阶测试板标定高陡度镜面检测的子孔径拼接ITF的方法。通过超精密车削技术制作了球面台阶测试板,并对其进行拼接检测,根据梯度定位法和旋转矩阵完成检测孔径中台阶的定位及采样,利用傅里叶变换方法实现对台阶实测面形的功率谱密度求解,最后与理想面形功率谱密度做比获得ITF。对口径100 mm、曲率半径100 mm、带有同心圆环台阶结构的球面台阶测试板进行拼接检测以及数据分析,实验结果表明:在1 mm-1的空间频率范围内,各个子孔径对高陡度镜面的检测水平平均可达到82.72%,具有较好的检测精度,随后ITF逐渐衰减,当空间频率在1.5 mm^(-1)左右时,仅能达到40%~60%。展开更多
The active control of 30-m ring interferometric telescope （RIT） needs edge sensing and tip sensing when its primary mirror is composed by trapezoid-shaped segments, and the imaging performance of the RIT is determin...The active control of 30-m ring interferometric telescope （RIT） needs edge sensing and tip sensing when its primary mirror is composed by trapezoid-shaped segments, and the imaging performance of the RIT is determined by the accuracy of these two detecting approaches. Considering the detecting accuracy available in current segmented telescope active control systems, the effect of these detecting approaches on the surface error of the RIT primary mirror is calculated from the point of error propagation. The corresponding effect on imaging performance （modulation transfer functions （MTFs） and point spread functions （PSFs） at several typical wavelengths） of the RIT primary mirror is also simulated. The results show that tip sensing is very important for increasing the active control quality of the RIT primary mirror under the present techniques.展开更多
文摘在高精度平面干涉仪系统评价标准中,仪器传递函数(Instrument Transfer Function,ITF)已经逐渐成为干涉仪性能的重要评价指标,它准确地反映了光学系统对于测量形貌不同空间频率的分辨能力。然而,ITF测试过程中的实验环境要求较为严格,干涉仪系统噪声会导致测试结果产生较大失真。为了能够准确表征干涉仪系统的性能,通过仿真分析与实际实验结合的方式,将仿真干涉图引入不同量级的高斯随机噪声,探究了噪声对于ITF测试结果的影响,提出测试误差的评价指标ITF_(RMS)值,分析了干涉仪系统的噪声容限,依据评价指标提出了几种不同的ITF测试优化方法,并搭建实验系统进行分析验证。实验结果表明,在未优化的ITF测试流程中,所搭建的干涉仪系统ITF测试的ITF_(RMS)值为0.1112,而优化后同样噪声量级的干涉仪系统所得ITF_(RMS)值则分别降至0.0693,0.0367,0.0579。此结果证明了优化方案的可行性,该方案能有效抑制干涉仪系统ITF测试过程中的噪声干扰影响。
基金supported by the National Natural Science Foundation of China(Nos.10573035,10533040)the National "973" Program of China(No.2006CB806300).
文摘The active control of 30-m ring interferometric telescope （RIT） needs edge sensing and tip sensing when its primary mirror is composed by trapezoid-shaped segments, and the imaging performance of the RIT is determined by the accuracy of these two detecting approaches. Considering the detecting accuracy available in current segmented telescope active control systems, the effect of these detecting approaches on the surface error of the RIT primary mirror is calculated from the point of error propagation. The corresponding effect on imaging performance （modulation transfer functions （MTFs） and point spread functions （PSFs） at several typical wavelengths） of the RIT primary mirror is also simulated. The results show that tip sensing is very important for increasing the active control quality of the RIT primary mirror under the present techniques.
