In the ＂modified quasi-steady＂ approach, two-dimensional （2D） aerodynamic models of flapping wing motions are analyzed with focus on different types of wing rotation and different positions of rotation axis to exp...In the ＂modified quasi-steady＂ approach, two-dimensional （2D） aerodynamic models of flapping wing motions are analyzed with focus on different types of wing rotation and different positions of rotation axis to explain the force peak at the end of each half stroke. In this model, an additional velocity of the mid chord position due to rotation is superimposed on the translational relative velocity of air with respect to the wing. This modification produces augmented forces around the end of each stroke. For each case of the flapping wing motions with various combination of controlled translational and rotational velocities of the wing along inclined stroke planes with thin figure-of-eight trajectory, discussions focus on lift-drag evolution during one stroke cycle and efficiency of types of wing rotation. This ＂modified quasi-steady＂ approach provides a systematic analysis of various parameters and their effects on efficiency of flapping wing mechanism. Flapping mechanism with delayed rotation around quarter-chord axis is an efficient one and can be made simple by a passive rotation mechanism so that it can be useful for robotic application.展开更多
In the non-inertial coordinates attached to the model wing, the two-dimensional unsteady flow field triggered by the motion of the model wing, similar to the flapping of the insect wings, was numerically simulated. On...In the non-inertial coordinates attached to the model wing, the two-dimensional unsteady flow field triggered by the motion of the model wing, similar to the flapping of the insect wings, was numerically simulated. One of the advantages of our method is that it has avoided the difficulty related to the moving-boundary problem. Another advantage is that the model has three degrees of freedom and can be used to simulate arbitrary motions of a two-dimensional wing in plane only if the motion is known. Such flexibility allows us to study how insects control their flying. Our results show that there are two parameters that are possibly utilized by insects to control their flight： the phase difference between the wing translation and rotation, and the lateral amplitude of flapping along the direction perpendicular to the average flapping plane.展开更多
Wing motion of a dragonfly in the maneuvering flight, which was measured by Wang et al. [1]was investigated. Equations of motion for a maneuvering flight of an insect were derived. These equations were applied for an...Wing motion of a dragonfly in the maneuvering flight, which was measured by Wang et al. [1]was investigated. Equations of motion for a maneuvering flight of an insect were derived. These equations were applied for analyzing the maneuvering flight. Inertial forces and moments acting on a body and wings were estimated by using these equations and the measured motions of the body and the wings. The results indicated the following characteristics of this flight: (1)The phase difference in flapping motion between the two fore wings and two hind wings, and the phase difference between the flapping motion and the feathering motion of the four wings are equal to those in a steady forward flight with the maximum efficiency. (2)The camber change and the feathering motion were mainly controlled by muscles at the wing bases.展开更多
A theoretical modeling approach as well as an unsteady analytical method is used to study aerodynamic characteristics of wing flapping with asymmetric stroke-cycles in connection with an oblique stroke plane during in...A theoretical modeling approach as well as an unsteady analytical method is used to study aerodynamic characteristics of wing flapping with asymmetric stroke-cycles in connection with an oblique stroke plane during insect forward flight. It is revealed that the aerodynamic asymmetry between the downstroke and the upstroke due to stroke-asymmetrical flapping is a key to understand the flow physics of generation and modulation of the lift and the thrust. Predicted results for examples of given kinematics validate more specifically some viewpoints that the wing lift is more easily produced when the forward speed is higher and the thrust is harder, and the lift and the thrust are generated mainly during downstroke and upstroke, respectively. The effects of three controlling parameters, i.e. the angles of tilted stroke plane, the different downstroke duration ratios, and the different angles of attack in both down- and up-stroke, are further discussed. It is found that larger oblique angles of stroke planes generate larger thrust but smaller lift; larger downstroke duration ratios lead to larger thrust, while making little change in lift and input aerodynamic power; and again, a small increase of the angle of attack in downstroke or upstroke may cause remarkable changes in aerodynamic performance in the relevant stroke.展开更多
The longitudinal steady-state control for going from hovering to small speed flight of a model insect is studied, using the method of computational fluid dynamics to compute the aerodynamic derivatives and the techniq...The longitudinal steady-state control for going from hovering to small speed flight of a model insect is studied, using the method of computational fluid dynamics to compute the aerodynamic derivatives and the techniques based on the linear theories of stability and control for determining the non-zero equilibrium points. Morphological and certain kinematical data of droneflies are used for the model insect. A change in the mean stroke angle （δФ） results in a horizontal forward or backward flight; a change in the stroke amplitude （δФ） or a equal change in the down- and upstroke angles of attack （δα1） results in a vertical climb or decent; a proper combination of δФ and δФ controls （or δФ and δα1 controls） can give a flight of any （small） speed in any desired direction.展开更多
The lateral dynamic flight stability of a hovering model insect （dronefly） was studied using the method of computational fluid dynamics to compute the stability derivatives and the techniques of eigenvalue and eigen...The lateral dynamic flight stability of a hovering model insect （dronefly） was studied using the method of computational fluid dynamics to compute the stability derivatives and the techniques of eigenvalue and eigenvector analysis for solving the equations of motion. The main results are as following. （i） Three natural modes of motion were identified： one unstable slow divergence mode （mode 1）, one stable slow oscillatory mode （mode 2）, and one stable fast subsidence mode （mode 3）. Modes 1 and 2 mainly consist of a rotation about the horizontal longitudinal axis （x-axis） and a side translation; mode 3 mainly consists of a rotation about the x-axis and a rotation about the vertical axis. （ii） Approximate analytical expressions of the eigenvalues are derived, which give physical insight into the genesis of the natural modes of motion. （iii） For the unstable divergence mode, td, the time for initial disturbances to double, is about 9 times the wingbeat period （the longitudinal motion of the model insect was shown to be also unstable and td of the longitudinal unstable mode is about 14 times the wingbeat period）. Thus, although the flight is not dynamically stable, the instability does not grow very fast and the insect has enough time to control its wing motion to suppress the disturbances.展开更多
We have examined the aerodynamic effects of corrugation in model wings that closely mimic the wing movements of a forward flight bumblebee using the method of computational fluid dynamics. Various corrugated wing mode...We have examined the aerodynamic effects of corrugation in model wings that closely mimic the wing movements of a forward flight bumblebee using the method of computational fluid dynamics. Various corrugated wing models were tested （care was taken to ensure that the corrugation introduced zero camber）. Advance ratio ranging from 0 to 0.57 was considered. The results shown that at all flight speeds considered, the time courses of aerodynamic force of the corrugated wing are very close to those of the flat-plate wing. The cornlgation decreases aerodynamic force slightly. The changes in the mean location of center of pressure in the spanwise and chordwise directions resulting from the corrugation are no more than 3% of the wing chord length. The possible reason for the small aerodynamic effects of wing corrugation is that the wing operates at a large angle of attack and the flow is separated： the large angle of incidence dominates the corrugation in determining the flow around the wing, and for separated flow, the flow is much less sensitive to wing shape variation.展开更多
In the present paper, the longitudinal dynamic flight stability properties of two model insects are predicted by an approximate theory and computed by numerical sim- ulation. The theory is based on the averaged model ...In the present paper, the longitudinal dynamic flight stability properties of two model insects are predicted by an approximate theory and computed by numerical sim- ulation. The theory is based on the averaged model （which assumes that the frequency of wingbeat is sufficiently higher than that of the body motion, so that the flapping wings＇ degrees of freedom relative to the body can be dropped and the wings can be replaced by wingbeat-cycle-average forces and moments）; the simulation solves the complete equations of motion coupled with the Navier-Stokes equations. Comparison between the theory and the simulation provides a test to the validity of the assumptions in the theory. One of the insects is a model dronefly which has relatively high wingbeat frequency （164 Hz） and the other is a model hawkmoth which has relatively low wingbeat frequency （26 Hz）. The results show that the averaged model is valid for the hawkmoth as well as for the dronefly. Since the wingbeat frequency of the hawkmoth is relatively low （the characteristic times of the natural modes of motion of the body divided by wingbeat period are relatively large） compared with many other insects, that the theory based on the averaged model is valid for the hawkmoth means that it could be valid for many insects.展开更多
In the present paper, the lateral dynamic flight stability properties of two hovering model insects are predicted by an approximate theory based on the averaged model, and computed by numerical simulation that solves ...In the present paper, the lateral dynamic flight stability properties of two hovering model insects are predicted by an approximate theory based on the averaged model, and computed by numerical simulation that solves the complete equations of motion coupled with the Naviertokes equations. Comparison between the theoretical and simulational results provides a test to the validity of the assumptions made in the theory. One of the insects is a model dronefly which has relatively high wingbeat frequency （164Hz） and the other is a model hawkmoth which has relatively low wingbeat frequency （26 Hz）. The following conclusion has been drawn. The theory based on the averaged model works well for the lateral motion of the dronefly. For the hawkmoth, relatively large quantitative differences exist between theory and simulation. This is because the lateral non-dimensional eigenvalues of the hawkmoth are not very small compared with the non-dimensional flapping frequency （the largest lateral non-dimensional eigenvalue is only about 10% smaller than the non-dimensional flapping frequency）. Nevertheless, the theory can still correctly predict variational trends of the dynamic properties of the hawkmoth＇s lateral motion.展开更多
The effects of corrugation and wing planform （shape and aspect ratio） on the aerodynamic force production of model insect wings in sweeping （rotating after an initial start） motion at Reynolds number 200 and 3500 ...The effects of corrugation and wing planform （shape and aspect ratio） on the aerodynamic force production of model insect wings in sweeping （rotating after an initial start） motion at Reynolds number 200 and 3500 at angle of attack 40℃ are investigated, using the method of computational fluid dynamics. A representative wing corrugation is considered. Wing-shape and aspect ratio （AR） of ten representative insect wings are considered; they are the wings of fruit fly, cranefly, dronefly, hoverfly, ladybird, bumblebee, honeybee, lacewing （forewing）, hawkmoth and dragon- fly （forewing）, respectively （AR of these wings varies greatly, from 2.84 to 5.45）. The following facts are shown. （1） The corrugated and flat-plate wings produce approximately the same aerodynamic forces. This is because for a sweeping wing at large angle of attack, the length scale of the corrugation is much smaller than the size of the separated flow region or the size of the leading edge vortex （LEV）. （2） The variation in wing shape can have considerable effects on the aerodynamic force; but it has only minor effects on the force coefficients when the velocity at r2 （the radius of the second ：moment of wing area） is used as the reference velocity; i.e. the force coefficients are almost unaffected by the variation in wing shape. （3） The effects of AR are remarkably small： whenAR increases from 2.8 to 5.5, the force coefficients vary only slightly; flowfield results show that when AR is relatively large, the part of the LEV on the outer part of the wings sheds during the sweeping motion. As AR is increased, on one hand, the force coefficients will be increased due to the reduction of 3-dimensional flow effects; on the other hand, they will be decreased due to the shedding of part of the LEV; these two effects approximately cancel each other, resulting in only minor change of the force coefficients.展开更多
Flexible wings of insects and bio-inspired micro air vehicles generally deform remarkably during flapping flight owing to aerodynamic and inertial forces,which is of highly nonlinear fluid-structure interaction（FSI）...Flexible wings of insects and bio-inspired micro air vehicles generally deform remarkably during flapping flight owing to aerodynamic and inertial forces,which is of highly nonlinear fluid-structure interaction（FSI）problems.To elucidate the novel mechanisms associated with flexible wing aerodynamics in the low Reynolds number regime,we have built up a FSI model of a hawkmoth wing undergoing revolving and made an investigation on the effects of flexible wing deformation on aerodynamic performance of the revolving wing model.To take into account the characteristics of flapping wing kinematics we designed a kinematic model for the revolving wing in two-fold：acceleration and steady rotation,which are based on hovering wing kinematics of hawkmoth,Manduca sexta.Our results show that both aerodynamic and inertial forces demonstrate a pronounced increase during acceleration phase,which results in a significant wing deformation.While the aerodynamic force turns to reduce after the wing acceleration terminates due to the burst and detachment of leading-edge vortices（LEVs）,the dynamic wing deformation seem to delay the burst of LEVs and hence to augment the aerodynamic force during and even after the acceleration.During the phase of steady rotation,the flexible wing model generates more ver-tical force at higher angles of attack（40°–60°）but less horizontal force than those of a rigid wing model.This is because the wing twist in spanwise owing to aerodynamic forces results in a reduction in the effective angle of attack at wing tip,which leads to enhancing the aerodynamics performance by increasing the vertical force while reducing the horizontal force.Moreover,our results point out the importance of the fluid-structure interaction in evaluating flexible wing aerodynamics：the wing deformation does play a significant role in enhancing the aerodynamic performances but works differently during acceleration and steady rotation,which is mainly induced by inertial force in acceleration but by aerodynamic forces in steady rotation.展开更多
During the insect flight, the force peak at the start of each stroke contributes a lot to the total aerodynamic force. Yet how this force is generated is still controversial. Two current explanations to this are wake ...During the insect flight, the force peak at the start of each stroke contributes a lot to the total aerodynamic force. Yet how this force is generated is still controversial. Two current explanations to this are wake capture and Added Mass Effect （AME） mechanisms. To study the AME, we present an extended unsteady blade element model which takes both the added mass of fluid and rotational effect of the wing into account. Simulation results show a high force peak at the start of each stroke and are quite similar to the measured forces on the physical wing model. We found that although the Added Mass Force （AMF） of the medium contributes a lot to this force peak, the wake capture effect further augments this force and may play a more important role in delayed mode. Furthermore, we also found that there might be an unknown mechanism which may augment the AME during acceleration period at the start of each stroke, and diminish the AME during deceleration at the end of each stroke.展开更多
Aerodynamic forces and power requirements in forward flight in a bumblebee （Bombus terrestris） were studied using the method of computational fluid dynamics. Actual wing kinematic data of free flight were used in th...Aerodynamic forces and power requirements in forward flight in a bumblebee （Bombus terrestris） were studied using the method of computational fluid dynamics. Actual wing kinematic data of free flight were used in the study （the speed ranges from 0 m/s to 4.5 m/s; advance ratio ranges from 0-0.66）. The bumblebee employs the delayed stall mechanism and the fast pitching-up rotation mechanism to produce vertical force and thrust. The leading-edge vortex does not shed in the translatory phase of the half-strokes and is much more concentrated than that of the fruit fly in a previous study. At hovering and low-speed flight, the vertical force is produced by both the half-strokes and is contributed by wing lift; at medium and high speeds, the vertical force is mainly produced during the downstroke and is contributed by both wing lift and wing drag. At all speeds the thrust is mainly produced in the upstroke and is contributed by wing drag. The power requirement at low to medium speeds is not very different from that of hovering and is relatively large at the highest speed （advance ratio 0.66）, i.e. the power curve is Jshaped. Except at the highest flight speed, storing energy elastically can save power up to 20%-30%. At the highest speed, because of the large increase of aerodynamic torque and the slight decrease of inertial torque （due to the smaller stroke amplitude and stroke frequency used）, the power requirement is dominated by aerodynamic power and the effect of elastic storage of energy on power requirement is limited.展开更多
The dynamic flight stability of a model dronefly in hovering and upward flight is studied.The method of computational fluid dynamics is used to compute the stability derivatives and the techniques of eigenvalue and ei...The dynamic flight stability of a model dronefly in hovering and upward flight is studied.The method of computational fluid dynamics is used to compute the stability derivatives and the techniques of eigenvalue and eigenvector used to solve the equations of motion.The major finding is as following.Hovering flight of the model dronefly is unstable because of the existence of an unstable longitudinal and an unstable lateral natural mode of motion.Upward flight of the insect is also unstable,and the instability increases as the upward flight speed increases.Inertial force generated by the upward flight velocity coupled with the disturbance in pitching angular velocity is responsible for the enhancement of the instability.展开更多
Our previous study shows that the hovering and forward flight of a bumblebee do not have inherent stability （passive stability）. But the bumblebees are observed to fly stably. Stabilization control must have been ap...Our previous study shows that the hovering and forward flight of a bumblebee do not have inherent stability （passive stability）. But the bumblebees are observed to fly stably. Stabilization control must have been applied. In this study, we investigate the longitudinal stabilization control of the bumblebee. The method of computational fluid dynamics is used to compute the control derivatives and the techniques of eigenvalue and eigenvector analysis and modal decomposition are used for solving the equations of motion. Controllability analysis shows that at all flight speeds considered, although inherently unstable, the flight is controllable. By feedbacking the state variables, i.e. vertical and horizontal velocities, pitching rate and pitch angle （which can be measured by the sensory system of the insect）, to produce changes in stroke angle and angle of attack of the wings, the flight can be stabilized, explaining why the bumblebees can fly stably even if they are passively unstable.展开更多
文摘In the ＂modified quasi-steady＂ approach, two-dimensional （2D） aerodynamic models of flapping wing motions are analyzed with focus on different types of wing rotation and different positions of rotation axis to explain the force peak at the end of each half stroke. In this model, an additional velocity of the mid chord position due to rotation is superimposed on the translational relative velocity of air with respect to the wing. This modification produces augmented forces around the end of each stroke. For each case of the flapping wing motions with various combination of controlled translational and rotational velocities of the wing along inclined stroke planes with thin figure-of-eight trajectory, discussions focus on lift-drag evolution during one stroke cycle and efficiency of types of wing rotation. This ＂modified quasi-steady＂ approach provides a systematic analysis of various parameters and their effects on efficiency of flapping wing mechanism. Flapping mechanism with delayed rotation around quarter-chord axis is an efficient one and can be made simple by a passive rotation mechanism so that it can be useful for robotic application.
文摘In the non-inertial coordinates attached to the model wing, the two-dimensional unsteady flow field triggered by the motion of the model wing, similar to the flapping of the insect wings, was numerically simulated. One of the advantages of our method is that it has avoided the difficulty related to the moving-boundary problem. Another advantage is that the model has three degrees of freedom and can be used to simulate arbitrary motions of a two-dimensional wing in plane only if the motion is known. Such flexibility allows us to study how insects control their flying. Our results show that there are two parameters that are possibly utilized by insects to control their flight： the phase difference between the wing translation and rotation, and the lateral amplitude of flapping along the direction perpendicular to the average flapping plane.
文摘Wing motion of a dragonfly in the maneuvering flight, which was measured by Wang et al. [1]was investigated. Equations of motion for a maneuvering flight of an insect were derived. These equations were applied for analyzing the maneuvering flight. Inertial forces and moments acting on a body and wings were estimated by using these equations and the measured motions of the body and the wings. The results indicated the following characteristics of this flight: (1)The phase difference in flapping motion between the two fore wings and two hind wings, and the phase difference between the flapping motion and the feathering motion of the four wings are equal to those in a steady forward flight with the maximum efficiency. (2)The camber change and the feathering motion were mainly controlled by muscles at the wing bases.
基金The project supported by the National Natural Science Foundation of China(10072066,90305009) the Chinese Academy of Sciences(KJCX-SW-L04,KJCX2-SW-L2)
文摘A theoretical modeling approach as well as an unsteady analytical method is used to study aerodynamic characteristics of wing flapping with asymmetric stroke-cycles in connection with an oblique stroke plane during insect forward flight. It is revealed that the aerodynamic asymmetry between the downstroke and the upstroke due to stroke-asymmetrical flapping is a key to understand the flow physics of generation and modulation of the lift and the thrust. Predicted results for examples of given kinematics validate more specifically some viewpoints that the wing lift is more easily produced when the forward speed is higher and the thrust is harder, and the lift and the thrust are generated mainly during downstroke and upstroke, respectively. The effects of three controlling parameters, i.e. the angles of tilted stroke plane, the different downstroke duration ratios, and the different angles of attack in both down- and up-stroke, are further discussed. It is found that larger oblique angles of stroke planes generate larger thrust but smaller lift; larger downstroke duration ratios lead to larger thrust, while making little change in lift and input aerodynamic power; and again, a small increase of the angle of attack in downstroke or upstroke may cause remarkable changes in aerodynamic performance in the relevant stroke.
基金the National Natural Science Foundation of China (10732030)the 111 Project (B07009)Specialized Research Fund for the Doctoral Program of Higher Education(SRFDP, 200800061013)
文摘The longitudinal steady-state control for going from hovering to small speed flight of a model insect is studied, using the method of computational fluid dynamics to compute the aerodynamic derivatives and the techniques based on the linear theories of stability and control for determining the non-zero equilibrium points. Morphological and certain kinematical data of droneflies are used for the model insect. A change in the mean stroke angle （δФ） results in a horizontal forward or backward flight; a change in the stroke amplitude （δФ） or a equal change in the down- and upstroke angles of attack （δα1） results in a vertical climb or decent; a proper combination of δФ and δФ controls （or δФ and δα1 controls） can give a flight of any （small） speed in any desired direction.
基金supported by the National Natural Science Foundation of China(10732030)the 111 Project(B07009)
文摘The lateral dynamic flight stability of a hovering model insect （dronefly） was studied using the method of computational fluid dynamics to compute the stability derivatives and the techniques of eigenvalue and eigenvector analysis for solving the equations of motion. The main results are as following. （i） Three natural modes of motion were identified： one unstable slow divergence mode （mode 1）, one stable slow oscillatory mode （mode 2）, and one stable fast subsidence mode （mode 3）. Modes 1 and 2 mainly consist of a rotation about the horizontal longitudinal axis （x-axis） and a side translation; mode 3 mainly consists of a rotation about the x-axis and a rotation about the vertical axis. （ii） Approximate analytical expressions of the eigenvalues are derived, which give physical insight into the genesis of the natural modes of motion. （iii） For the unstable divergence mode, td, the time for initial disturbances to double, is about 9 times the wingbeat period （the longitudinal motion of the model insect was shown to be also unstable and td of the longitudinal unstable mode is about 14 times the wingbeat period）. Thus, although the flight is not dynamically stable, the instability does not grow very fast and the insect has enough time to control its wing motion to suppress the disturbances.
基金Acknowledgement This research was supported by the National Natural Science Foundation of China （Grant No. 10732030） and the 111 Project （B07009）.
文摘We have examined the aerodynamic effects of corrugation in model wings that closely mimic the wing movements of a forward flight bumblebee using the method of computational fluid dynamics. Various corrugated wing models were tested （care was taken to ensure that the corrugation introduced zero camber）. Advance ratio ranging from 0 to 0.57 was considered. The results shown that at all flight speeds considered, the time courses of aerodynamic force of the corrugated wing are very close to those of the flat-plate wing. The cornlgation decreases aerodynamic force slightly. The changes in the mean location of center of pressure in the spanwise and chordwise directions resulting from the corrugation are no more than 3% of the wing chord length. The possible reason for the small aerodynamic effects of wing corrugation is that the wing operates at a large angle of attack and the flow is separated： the large angle of incidence dominates the corrugation in determining the flow around the wing, and for separated flow, the flow is much less sensitive to wing shape variation.
基金supported by the National Natural Science Foundation of China (10732030) and the 111 Project (B07009)
文摘In the present paper, the longitudinal dynamic flight stability properties of two model insects are predicted by an approximate theory and computed by numerical sim- ulation. The theory is based on the averaged model （which assumes that the frequency of wingbeat is sufficiently higher than that of the body motion, so that the flapping wings＇ degrees of freedom relative to the body can be dropped and the wings can be replaced by wingbeat-cycle-average forces and moments）; the simulation solves the complete equations of motion coupled with the Navier-Stokes equations. Comparison between the theory and the simulation provides a test to the validity of the assumptions in the theory. One of the insects is a model dronefly which has relatively high wingbeat frequency （164 Hz） and the other is a model hawkmoth which has relatively low wingbeat frequency （26 Hz）. The results show that the averaged model is valid for the hawkmoth as well as for the dronefly. Since the wingbeat frequency of the hawkmoth is relatively low （the characteristic times of the natural modes of motion of the body divided by wingbeat period are relatively large） compared with many other insects, that the theory based on the averaged model is valid for the hawkmoth means that it could be valid for many insects.
基金supported by the National Natural Science Foundation of China (10732030)the Foundation for the Author of National Excellent Doctoral Dissertation (2007B31)
文摘In the present paper, the lateral dynamic flight stability properties of two hovering model insects are predicted by an approximate theory based on the averaged model, and computed by numerical simulation that solves the complete equations of motion coupled with the Naviertokes equations. Comparison between the theoretical and simulational results provides a test to the validity of the assumptions made in the theory. One of the insects is a model dronefly which has relatively high wingbeat frequency （164Hz） and the other is a model hawkmoth which has relatively low wingbeat frequency （26 Hz）. The following conclusion has been drawn. The theory based on the averaged model works well for the lateral motion of the dronefly. For the hawkmoth, relatively large quantitative differences exist between theory and simulation. This is because the lateral non-dimensional eigenvalues of the hawkmoth are not very small compared with the non-dimensional flapping frequency （the largest lateral non-dimensional eigenvalue is only about 10% smaller than the non-dimensional flapping frequency）. Nevertheless, the theory can still correctly predict variational trends of the dynamic properties of the hawkmoth＇s lateral motion.
基金The project supported by the National Natural Science Foundation of China(10232010 and 10472008)Ph.D.Student Foundation of Chinese Ministry of Education(20030006022)
文摘The effects of corrugation and wing planform （shape and aspect ratio） on the aerodynamic force production of model insect wings in sweeping （rotating after an initial start） motion at Reynolds number 200 and 3500 at angle of attack 40℃ are investigated, using the method of computational fluid dynamics. A representative wing corrugation is considered. Wing-shape and aspect ratio （AR） of ten representative insect wings are considered; they are the wings of fruit fly, cranefly, dronefly, hoverfly, ladybird, bumblebee, honeybee, lacewing （forewing）, hawkmoth and dragon- fly （forewing）, respectively （AR of these wings varies greatly, from 2.84 to 5.45）. The following facts are shown. （1） The corrugated and flat-plate wings produce approximately the same aerodynamic forces. This is because for a sweeping wing at large angle of attack, the length scale of the corrugation is much smaller than the size of the separated flow region or the size of the leading edge vortex （LEV）. （2） The variation in wing shape can have considerable effects on the aerodynamic force; but it has only minor effects on the force coefficients when the velocity at r2 （the radius of the second ：moment of wing area） is used as the reference velocity; i.e. the force coefficients are almost unaffected by the variation in wing shape. （3） The effects of AR are remarkably small： whenAR increases from 2.8 to 5.5, the force coefficients vary only slightly; flowfield results show that when AR is relatively large, the part of the LEV on the outer part of the wings sheds during the sweeping motion. As AR is increased, on one hand, the force coefficients will be increased due to the reduction of 3-dimensional flow effects; on the other hand, they will be decreased due to the shedding of part of the LEV; these two effects approximately cancel each other, resulting in only minor change of the force coefficients.
基金supported by the Grant-in-Aid for Scientific Research(21360078 and 18100002)Grant-in-Aid for Scientific Research on Innovative Areas(24120007,JSPS)
文摘Flexible wings of insects and bio-inspired micro air vehicles generally deform remarkably during flapping flight owing to aerodynamic and inertial forces,which is of highly nonlinear fluid-structure interaction（FSI）problems.To elucidate the novel mechanisms associated with flexible wing aerodynamics in the low Reynolds number regime,we have built up a FSI model of a hawkmoth wing undergoing revolving and made an investigation on the effects of flexible wing deformation on aerodynamic performance of the revolving wing model.To take into account the characteristics of flapping wing kinematics we designed a kinematic model for the revolving wing in two-fold：acceleration and steady rotation,which are based on hovering wing kinematics of hawkmoth,Manduca sexta.Our results show that both aerodynamic and inertial forces demonstrate a pronounced increase during acceleration phase,which results in a significant wing deformation.While the aerodynamic force turns to reduce after the wing acceleration terminates due to the burst and detachment of leading-edge vortices（LEVs）,the dynamic wing deformation seem to delay the burst of LEVs and hence to augment the aerodynamic force during and even after the acceleration.During the phase of steady rotation,the flexible wing model generates more ver-tical force at higher angles of attack（40°–60°）but less horizontal force than those of a rigid wing model.This is because the wing twist in spanwise owing to aerodynamic forces results in a reduction in the effective angle of attack at wing tip,which leads to enhancing the aerodynamics performance by increasing the vertical force while reducing the horizontal force.Moreover,our results point out the importance of the fluid-structure interaction in evaluating flexible wing aerodynamics：the wing deformation does play a significant role in enhancing the aerodynamic performances but works differently during acceleration and steady rotation,which is mainly induced by inertial force in acceleration but by aerodynamic forces in steady rotation.
文摘During the insect flight, the force peak at the start of each stroke contributes a lot to the total aerodynamic force. Yet how this force is generated is still controversial. Two current explanations to this are wake capture and Added Mass Effect （AME） mechanisms. To study the AME, we present an extended unsteady blade element model which takes both the added mass of fluid and rotational effect of the wing into account. Simulation results show a high force peak at the start of each stroke and are quite similar to the measured forces on the physical wing model. We found that although the Added Mass Force （AMF） of the medium contributes a lot to this force peak, the wake capture effect further augments this force and may play a more important role in delayed mode. Furthermore, we also found that there might be an unknown mechanism which may augment the AME during acceleration period at the start of each stroke, and diminish the AME during deceleration at the end of each stroke.
基金The project supported by the National Natural Science Foundation of China(10232010)the National Aeronautic Science fund of China(03A51049)
文摘Aerodynamic forces and power requirements in forward flight in a bumblebee （Bombus terrestris） were studied using the method of computational fluid dynamics. Actual wing kinematic data of free flight were used in the study （the speed ranges from 0 m/s to 4.5 m/s; advance ratio ranges from 0-0.66）. The bumblebee employs the delayed stall mechanism and the fast pitching-up rotation mechanism to produce vertical force and thrust. The leading-edge vortex does not shed in the translatory phase of the half-strokes and is much more concentrated than that of the fruit fly in a previous study. At hovering and low-speed flight, the vertical force is produced by both the half-strokes and is contributed by wing lift; at medium and high speeds, the vertical force is mainly produced during the downstroke and is contributed by both wing lift and wing drag. At all speeds the thrust is mainly produced in the upstroke and is contributed by wing drag. The power requirement at low to medium speeds is not very different from that of hovering and is relatively large at the highest speed （advance ratio 0.66）, i.e. the power curve is Jshaped. Except at the highest flight speed, storing energy elastically can save power up to 20%-30%. At the highest speed, because of the large increase of aerodynamic torque and the slight decrease of inertial torque （due to the smaller stroke amplitude and stroke frequency used）, the power requirement is dominated by aerodynamic power and the effect of elastic storage of energy on power requirement is limited.
基金supported by the National Natural Science Foundation of China(11232002)
文摘The dynamic flight stability of a model dronefly in hovering and upward flight is studied.The method of computational fluid dynamics is used to compute the stability derivatives and the techniques of eigenvalue and eigenvector used to solve the equations of motion.The major finding is as following.Hovering flight of the model dronefly is unstable because of the existence of an unstable longitudinal and an unstable lateral natural mode of motion.Upward flight of the insect is also unstable,and the instability increases as the upward flight speed increases.Inertial force generated by the upward flight velocity coupled with the disturbance in pitching angular velocity is responsible for the enhancement of the instability.
基金the National Natural Science Foundation of China (10732030)
文摘Our previous study shows that the hovering and forward flight of a bumblebee do not have inherent stability （passive stability）. But the bumblebees are observed to fly stably. Stabilization control must have been applied. In this study, we investigate the longitudinal stabilization control of the bumblebee. The method of computational fluid dynamics is used to compute the control derivatives and the techniques of eigenvalue and eigenvector analysis and modal decomposition are used for solving the equations of motion. Controllability analysis shows that at all flight speeds considered, although inherently unstable, the flight is controllable. By feedbacking the state variables, i.e. vertical and horizontal velocities, pitching rate and pitch angle （which can be measured by the sensory system of the insect）, to produce changes in stroke angle and angle of attack of the wings, the flight can be stabilized, explaining why the bumblebees can fly stably even if they are passively unstable.
