The influence of Impedance Boundary Condition (IBC) on transonic compressors is investigated. A systematic input–output analytical framework is developed, which treats the nonlinearities as unknown forcing terms. The...The influence of Impedance Boundary Condition (IBC) on transonic compressors is investigated. A systematic input–output analytical framework is developed, which treats the nonlinearities as unknown forcing terms. The framework is validated through the experiments of rotating inlet distortion within a low-speed compressor. The input–output method is subsequently applied to transonic compressors, including NASA Rotor37 and Stage35, wherein impedance optimization is studied along with the exploration of its fundamental mechanisms. The IBC is employed to model the effect of Casing Treatment (CT). The optimal complex impedance values are determined through predicted results and tested across a range of circumferential modes and forcing frequencies. The IBC significantly reduces the energy and Reynolds stress gain, notably at the first-order circumferential mode and within the Rotor Rotating Frequency (RRF) range. Output modes reveal that transonic compressors with fine-tuned impedance values exhibit a more confined perturbation distribution and redistribute the perturbations compared to the uncontrolled case. Additionally, the roles of resistance and reactance are elucidated through input–output analysis, and resistance determines the energy transfer direction between flow and pressure waves and modulates the amplitude, whereas reactance modifies the phase relationships and attenuates the perturbations.展开更多
A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are p...A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are presented. By approaches of nonlinear analysis some solvability results of this equation and continuous perturbation properties of the relative solution sets are obtained, and some economic significance are illustrated by the remark.展开更多
The method of compiling input-output models of science and technology was studied,and the application of input-output techniques in evaluating the progress of enterprise science and technology was discussed.And the mo...The method of compiling input-output models of science and technology was studied,and the application of input-output techniques in evaluating the progress of enterprise science and technology was discussed.And the models for determining direct,indirect and full contributions of the progress of enterprise science and technology have been set up which can be used to analyse and evaluate the direct,indirect and full benefits of the progress of enterprise science and technology.展开更多
Global production networks have become the most important organizational platforms for coordinating international production activities,and their evolution patterns profoundly affect value distribution across the worl...Global production networks have become the most important organizational platforms for coordinating international production activities,and their evolution patterns profoundly affect value distribution across the world.In this study,we shall firstly carry out an in-depth quantitative research to analyze the patterns and evolution of global production networks,using a long time-sequenced multi-region input-output table and the network analysis approach.Then based on the method of value-added decomposition,we will develop an index system to measure the degree of participation of regions in global production networks.Finally,we will try to identify the factors affecting the degree of participation of countries in global production networks by constructing a regression model.The results show that from 1995 to 2015,the evolution of global production networks measured by input-output linkages experienced four stages:expansion,contraction,re-expansion,and re-contraction.In addition,the core communities of global production networks evolved from two major production communities(Europe and the Americas)to three pillars(Europe,Americas,and Asia)while more segmented communities are mainly affected by geographical proximity.The latter consists of European,North American,South American,African and Asian communities.The evolution of the global production network pattern primarily manifests as a process of cooperation strengthening or weakening among communities,based on changes in the external environment and the need for individual development strategies.Meanwhile,the United States,Germany,and the United Kingdom have consistently ranked among the top entities in global production networks,whereas China,Russia,and Southeast Asia have the fastest rises in ranking.In addition,government efficiency,resources endowment,infrastructure conditions and technology levels play important roles in the participation in global production networks.展开更多
Based on input-output approach, the robust stability and stabilization problems for uncertain singular systems with time-varying delays are investigated. The parameter uncertainties are assumed to be norm-bounded and ...Based on input-output approach, the robust stability and stabilization problems for uncertain singular systems with time-varying delays are investigated. The parameter uncertainties are assumed to be norm-bounded and the time-varying delays include both discrete delay and distributed delay. By introducing a new input-output model, the time-delay system is embedded in a family of systems with a forward system without time delay and a dynamical feedback uncertainty. A sufficient and necessary condition, which guarantees the system regular, impulse-free and stable for all admissible uncertainties, is obtained. Based on the strict linear matrix inequality, the desired robust state feedback controller is also obtained. Finally, a numerical example is provided to demonstrate the application of the proposed method.展开更多
Industrial wastewater discharge in China is increasing with the country′s economic development and it is worthy of concern. The discharge is primarily relevant to the direct discharge coefficient of each sector of th...Industrial wastewater discharge in China is increasing with the country′s economic development and it is worthy of concern. The discharge is primarily relevant to the direct discharge coefficient of each sector of the economy, its direct input coefficient and the final demand in input-output models. In this study, we calculated the sensitivity of the reduction in the Chinese industrial wastewater discharge using the direct input coefficients based on the theory of error-transmission in an input-output framework. Using input-output models, we calculated the direct and total industrial wastewater discharge coefficients. Analysis of 2007 input-output data of 30 sectors of the Chinese economy and of 30 provincial regions of China indicates that by lowering their direct input coefficients, the manufacturers of textiles, paper and paper products, chemical products, smelting and metal pressing, telecommunication equipment, computers and other electronic equipment will significantly reduce their amounts of industrial wastewater discharge. By lowering intra-provincial direct input coefficients to industrial sectors themselves of Jiangsu, Shandong and Zhejiang, there will be a significant reduction in industrial wastewater discharge for the country as a whole. Investment in production technology and improvement in organizational efficiency in these sectors and in these provinces can help lessen the direct input coefficients, thereby effectively achieving a reduction in industrial wastewater discharge in China via industrial restructuring.展开更多
An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is w...An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is well known that appropriate coupling of inputs-outputs signals in the multivariable HVDC-HVAC system can improve the performance of designed supplemetary controller. In this work, different analysis techniques are used to measure controllability and observability of electromechanical oscillation mode. Also inputs–outputs interactions are considered and suggestions are drawn to select the best signal pair through the system inputs-outputs. In addition, a supplementary online adaptive controller for nonlinear HVDC to damp low frequency oscillations in a weakly connected system is proposed. The results obtained using MATLAB software show that the best output-input for damping controller design is rotor speed deviation as out put and phase angle of rectifier as in put. Also response of system equipped with adaptive damping controller based on HVDC system has appropriate performance when it is faced with faults and disturbance.展开更多
Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvabili...Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvability,continuity and surjectivity,and some fixed point and surjectivity methods in nonlinear analysis were used to deal with these questions. As a result,the main theorems are obtained,which provide some sufficient criterions to solve above questions described by the boundary properties of the enterprises consuming operator.展开更多
On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the ind...On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the industries of Henan Province and the industries of other regions. I summarize the characteristics of this method based on this as follows: when researching inter-regional economic link, the multi-region or two-region input-output model has prominent superiority, and we can conduct preliminary estimation on the multi-region input-output model using location quotient approach.展开更多
Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output ...Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output mechanism under which the change related to energy is surely transmitted to other industries. The price change thus incurred in all industries may adversely affect the realization of macroeconomic objective-maintaining prices at a stable level. It is, therefore, needed to conduct an empirical research related to the impact of price change in energy industry on that in other industries. According to the data coming from “China’s 2015 Input-Output Extension Table (42 Departments)” and four hypothetical basis, this article focuses on four energy sectors and analyzes how deeply the price change of them, by use of input-output model, affects that of other industrial products under five conditions where each of their price rises by 10% individually or simultaneously, and why such an influence occurs. The results show that the price rising of the energies in question leads to an upward growth in the prices of other industrial products, especially when their prices go up simultaneously. Besides, the price increase in the four energy sectors doesn’t influence other industries in an accumulation form but actually leads to a rollback in some of other industries. It is recommended to adopt diversified pricing strategies for different energy products, thus maximizing the value of each specific energy, and meanwhile achieving the goals of energy consumption reduction and price equilibrium.展开更多
To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed ...To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.展开更多
Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the ...Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the index of＂ weighted value-added productivity ＂ by compiling non-competitive input-output tables which distinguish high-tech industries from traditional industries. The new method effectively avoids ＂statistical illusion＂ which stems from a biased focus on gross exports under intra-product specialization. The empirical study shows that since 1995, the status of China＇s high-tech industries has grown quickly as a result of enhanced labor productivity, but still lags behind those of major developed countries. In addition, the study also suggests that the status of China＇s high-tech industries has been over-estimated using the traditional gross export statistical method.展开更多
The paper assesses the economic impacts of the natural forest protection program （NFPP） on the economy of Yunnan Province, China.in terms of gross output, value added,employment, and household income. An inputoutput...The paper assesses the economic impacts of the natural forest protection program （NFPP） on the economy of Yunnan Province, China.in terms of gross output, value added,employment, and household income. An inputoutput model is developed to estimate NFPP＇s economic impacts by means of backward linkages in the forestry sector and logging and haudage sector. It is found than the NFPP has positive impacts on gross output, value added and houschold income in the initial year, but has significantly negative impacts on the regional economy in the following years as the investment decreases.展开更多
The development of any analytical method should have to experience at least four stages: its initial status, growth, mature and declining. However, although the regional input-output analysis has been widely applied f...The development of any analytical method should have to experience at least four stages: its initial status, growth, mature and declining. However, although the regional input-output analysis has been widely applied for more than forty years, it is still one of the most important approach in regional economic analysis and forecast at present in the world. This is due to the never ended modifications and its great potentials. In this paper, we review the historical development of the regional input-output analysis.展开更多
Becoming the world's largest emitter of carbon makes China the object of criticism;however,people may ignore the fact that when China exports low-carbon products,the carbon emissions have been left in the meanwhil...Becoming the world's largest emitter of carbon makes China the object of criticism;however,people may ignore the fact that when China exports low-carbon products,the carbon emissions have been left in the meanwhile,forming the so-called"embodied carbon".Using the input-output model,this paper analyzes the carbon emission intensity and amount of embodied carbon of various sectors in China's export trade in 2002 and 2007,and filters out high carbon emission sectors.In addition,this paper also points out the problem of carbon emissions'international transfer from developed countries to China through the analysis of national and regional flow of export carbon emissions and changing of the proportion of emissions for exports relative to total emissions,and explains the reason that caused carbon transfer to China by using the treadmill of production theory.Based on that,this paper proposes some measures for carbon reduction in China from the foreign trade perspective.展开更多
Under the pressure of sustained growth in energy consumption in China,the implementation of a carbon pricing mechanism is an effective economic policy measure for promoting emission reduction,as well as a hotspot of r...Under the pressure of sustained growth in energy consumption in China,the implementation of a carbon pricing mechanism is an effective economic policy measure for promoting emission reduction,as well as a hotspot of research among scholars and policy makers.In this paper,the effects of carbon prices on Beijing's economy are analyzed using input-output tables.The carbon price costs are levied in accordance with the products'embodied carbon emission.By calculation,given the carbon price rate of 10 RMB/t-CO_2,the total carbon costs of Beijing account for approximately 0.22-0.40%of its gross revenue the same year.Among all industries,construction bears the largest carbon cost Among export sectors,the coal mining and washing industry has much higher export carbon price intensity than other industries.Apart from traditional energy-intensive industries,tertiary industry,which accounts for more than 70%of Beijing's economy,also bears a major carbon cost because of its large economic size.However,from 2007 to 2010,adjustment of the investment structure has reduced the emission intensity in investment sectors,contributing to the reduction of overall emissions and carbon price intensity.展开更多
A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input d...A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input data in accordance with the groups of output data.Then,a set of prototypes are selected from the clustered input data.The inessential data can be ultimately discarded from the data set.The proposed method can reduce the effect from outliers because only the prototypes are used.This method is applied to reduce the data set in regression problems.Two standard synthetic data sets and three standard real-world data sets are used for evaluation.The root-mean-square errors are compared from support vector regression models trained with the original data sets and the corresponding instance-reduced data sets.From the experiments,the proposed method provides good results on the reduction and the reconstruction of the standard synthetic and real-world data sets.The numbers of instances of the synthetic data sets are decreased by 25%-69%.The reduction rates for the real-world data sets of the automobile miles per gallon and the 1990 census in CA are 46% and 57%,respectively.The reduction rate of 96% is very good for the electrocardiogram(ECG) data set because of the redundant and periodic nature of ECG signals.For all of the data sets,the regression results are similar to those from the corresponding original data sets.Therefore,the regression performance of the proposed method is good while only a fraction of the data is needed in the training process.展开更多
This paper addresses the robust input-output energy decoupling problem for uncertain singular systems in which all parameter matrices except E exist as time-varying uncertainties. By means of linear matrix inequalitie...This paper addresses the robust input-output energy decoupling problem for uncertain singular systems in which all parameter matrices except E exist as time-varying uncertainties. By means of linear matrix inequalities (LMIs), sufficient conditions are derived for the existence of linear state feedback and input transformation control laws, such that the resulting closed-loop uncertain singular system is generalized quadratically stable and the energy of every input controls mainly the energy of a corresponding output, and influences the energy of other outputs as weakly as possible. Keywords Uncertain singular systems - generalized quadratical stability - input-output energy decoupling - linear matrix inequality (LMI) Xin-Zhuang Dong graduated from the Institute of Information Engineering of People’s Liberation Army, China, in 1994. She received the M. S. degree from the Institute of Electronic Technology of People’s Liberation Army, in 1998 and the Ph.D. degree from Northeastern University, China, in 2004. She is currently a post-doctoral fellow at the Key Laboratory of Systems and Control, CAS.Her research interests include singular and nonlinear systems, especially the control of singular systems such as H ∞ control, passive control and dissipative control. Qing-Ling Zhang received the Ph.D. degree from Northeastern University, China, in 1995. He is currently a professor with the Institute of Systems Science, Northeastern University. His research interests include singular systems, fuzzy systems, decentralized control, and H 2/H ∞ control.展开更多
We propose a scheme to purify entanglement of two atoms from not-too-impure entangled states by checking the parity of the two atoms through the cavity input-output process. As the parity check is made by measurement ...We propose a scheme to purify entanglement of two atoms from not-too-impure entangled states by checking the parity of the two atoms through the cavity input-output process. As the parity check is made by measurement on single-photon polarization, which would not affect the entanglement of the two atoms, our scheme has the successful probability double of that in a previous well-known scheme with linear optical elements [Nature （London） 410 （2001） 1067], and is insensitive to the photon loss and the detection inefficieney. Experimental feasibility of our scheme with current technology is discussed.展开更多
基金co-supported by the National Natural Science Foundation of China(Nos.52325602,52306036 and 52306035)the National Science and Technology Major Project of China(No.Y2022-II-0003-0006 and Y2022-II-0002-0005)+1 种基金the project funded by China Postdoctoral Science Foundation(No.2022M720346)supported by the Key Laboratory of Pre-Research Management Centre of China(No.6142702200101).
文摘The influence of Impedance Boundary Condition (IBC) on transonic compressors is investigated. A systematic input–output analytical framework is developed, which treats the nonlinearities as unknown forcing terms. The framework is validated through the experiments of rotating inlet distortion within a low-speed compressor. The input–output method is subsequently applied to transonic compressors, including NASA Rotor37 and Stage35, wherein impedance optimization is studied along with the exploration of its fundamental mechanisms. The IBC is employed to model the effect of Casing Treatment (CT). The optimal complex impedance values are determined through predicted results and tested across a range of circumferential modes and forcing frequencies. The IBC significantly reduces the energy and Reynolds stress gain, notably at the first-order circumferential mode and within the Rotor Rotating Frequency (RRF) range. Output modes reveal that transonic compressors with fine-tuned impedance values exhibit a more confined perturbation distribution and redistribute the perturbations compared to the uncontrolled case. Additionally, the roles of resistance and reactance are elucidated through input–output analysis, and resistance determines the energy transfer direction between flow and pressure waves and modulates the amplitude, whereas reactance modifies the phase relationships and attenuates the perturbations.
文摘A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are presented. By approaches of nonlinear analysis some solvability results of this equation and continuous perturbation properties of the relative solution sets are obtained, and some economic significance are illustrated by the remark.
文摘The method of compiling input-output models of science and technology was studied,and the application of input-output techniques in evaluating the progress of enterprise science and technology was discussed.And the models for determining direct,indirect and full contributions of the progress of enterprise science and technology have been set up which can be used to analyse and evaluate the direct,indirect and full benefits of the progress of enterprise science and technology.
基金Strategic Priority Research Program of Chinese Academy of Sciences,No.XDA20080000National Natural Science Foundation of China,No.41901154。
文摘Global production networks have become the most important organizational platforms for coordinating international production activities,and their evolution patterns profoundly affect value distribution across the world.In this study,we shall firstly carry out an in-depth quantitative research to analyze the patterns and evolution of global production networks,using a long time-sequenced multi-region input-output table and the network analysis approach.Then based on the method of value-added decomposition,we will develop an index system to measure the degree of participation of regions in global production networks.Finally,we will try to identify the factors affecting the degree of participation of countries in global production networks by constructing a regression model.The results show that from 1995 to 2015,the evolution of global production networks measured by input-output linkages experienced four stages:expansion,contraction,re-expansion,and re-contraction.In addition,the core communities of global production networks evolved from two major production communities(Europe and the Americas)to three pillars(Europe,Americas,and Asia)while more segmented communities are mainly affected by geographical proximity.The latter consists of European,North American,South American,African and Asian communities.The evolution of the global production network pattern primarily manifests as a process of cooperation strengthening or weakening among communities,based on changes in the external environment and the need for individual development strategies.Meanwhile,the United States,Germany,and the United Kingdom have consistently ranked among the top entities in global production networks,whereas China,Russia,and Southeast Asia have the fastest rises in ranking.In addition,government efficiency,resources endowment,infrastructure conditions and technology levels play important roles in the participation in global production networks.
基金Project supported by the Key Program of the National NaturalScience Foundation of China (No. 60434020)the National Natural Science Foundation of China (No. 60604003)
文摘Based on input-output approach, the robust stability and stabilization problems for uncertain singular systems with time-varying delays are investigated. The parameter uncertainties are assumed to be norm-bounded and the time-varying delays include both discrete delay and distributed delay. By introducing a new input-output model, the time-delay system is embedded in a family of systems with a forward system without time delay and a dynamical feedback uncertainty. A sufficient and necessary condition, which guarantees the system regular, impulse-free and stable for all admissible uncertainties, is obtained. Based on the strict linear matrix inequality, the desired robust state feedback controller is also obtained. Finally, a numerical example is provided to demonstrate the application of the proposed method.
基金Under the auspices of Key Program of Chinese Academy of Sciences(No.KZZD-EW-06-02)National Natural Science Foundation of China(No.41201129)Humanities and Social Science Research Planning Fund,Ministry of Education of China(No.13YJAZH042)
文摘Industrial wastewater discharge in China is increasing with the country′s economic development and it is worthy of concern. The discharge is primarily relevant to the direct discharge coefficient of each sector of the economy, its direct input coefficient and the final demand in input-output models. In this study, we calculated the sensitivity of the reduction in the Chinese industrial wastewater discharge using the direct input coefficients based on the theory of error-transmission in an input-output framework. Using input-output models, we calculated the direct and total industrial wastewater discharge coefficients. Analysis of 2007 input-output data of 30 sectors of the Chinese economy and of 30 provincial regions of China indicates that by lowering their direct input coefficients, the manufacturers of textiles, paper and paper products, chemical products, smelting and metal pressing, telecommunication equipment, computers and other electronic equipment will significantly reduce their amounts of industrial wastewater discharge. By lowering intra-provincial direct input coefficients to industrial sectors themselves of Jiangsu, Shandong and Zhejiang, there will be a significant reduction in industrial wastewater discharge for the country as a whole. Investment in production technology and improvement in organizational efficiency in these sectors and in these provinces can help lessen the direct input coefficients, thereby effectively achieving a reduction in industrial wastewater discharge in China via industrial restructuring.
文摘An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is well known that appropriate coupling of inputs-outputs signals in the multivariable HVDC-HVAC system can improve the performance of designed supplemetary controller. In this work, different analysis techniques are used to measure controllability and observability of electromechanical oscillation mode. Also inputs–outputs interactions are considered and suggestions are drawn to select the best signal pair through the system inputs-outputs. In addition, a supplementary online adaptive controller for nonlinear HVDC to damp low frequency oscillations in a weakly connected system is proposed. The results obtained using MATLAB software show that the best output-input for damping controller design is rotor speed deviation as out put and phase angle of rectifier as in put. Also response of system equipped with adaptive damping controller based on HVDC system has appropriate performance when it is faced with faults and disturbance.
文摘Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvability,continuity and surjectivity,and some fixed point and surjectivity methods in nonlinear analysis were used to deal with these questions. As a result,the main theorems are obtained,which provide some sufficient criterions to solve above questions described by the boundary properties of the enterprises consuming operator.
基金Supported by Project of Henan Provincial Department of Science and Technology (112400410017)Project of Henan Provincial Department of Education (2010-QN-008)
文摘On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the industries of Henan Province and the industries of other regions. I summarize the characteristics of this method based on this as follows: when researching inter-regional economic link, the multi-region or two-region input-output model has prominent superiority, and we can conduct preliminary estimation on the multi-region input-output model using location quotient approach.
文摘Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output mechanism under which the change related to energy is surely transmitted to other industries. The price change thus incurred in all industries may adversely affect the realization of macroeconomic objective-maintaining prices at a stable level. It is, therefore, needed to conduct an empirical research related to the impact of price change in energy industry on that in other industries. According to the data coming from “China’s 2015 Input-Output Extension Table (42 Departments)” and four hypothetical basis, this article focuses on four energy sectors and analyzes how deeply the price change of them, by use of input-output model, affects that of other industrial products under five conditions where each of their price rises by 10% individually or simultaneously, and why such an influence occurs. The results show that the price rising of the energies in question leads to an upward growth in the prices of other industrial products, especially when their prices go up simultaneously. Besides, the price increase in the four energy sectors doesn’t influence other industries in an accumulation form but actually leads to a rollback in some of other industries. It is recommended to adopt diversified pricing strategies for different energy products, thus maximizing the value of each specific energy, and meanwhile achieving the goals of energy consumption reduction and price equilibrium.
文摘To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.
文摘Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the index of＂ weighted value-added productivity ＂ by compiling non-competitive input-output tables which distinguish high-tech industries from traditional industries. The new method effectively avoids ＂statistical illusion＂ which stems from a biased focus on gross exports under intra-product specialization. The empirical study shows that since 1995, the status of China＇s high-tech industries has grown quickly as a result of enhanced labor productivity, but still lags behind those of major developed countries. In addition, the study also suggests that the status of China＇s high-tech industries has been over-estimated using the traditional gross export statistical method.
文摘The paper assesses the economic impacts of the natural forest protection program （NFPP） on the economy of Yunnan Province, China.in terms of gross output, value added,employment, and household income. An inputoutput model is developed to estimate NFPP＇s economic impacts by means of backward linkages in the forestry sector and logging and haudage sector. It is found than the NFPP has positive impacts on gross output, value added and houschold income in the initial year, but has significantly negative impacts on the regional economy in the following years as the investment decreases.
文摘The development of any analytical method should have to experience at least four stages: its initial status, growth, mature and declining. However, although the regional input-output analysis has been widely applied for more than forty years, it is still one of the most important approach in regional economic analysis and forecast at present in the world. This is due to the never ended modifications and its great potentials. In this paper, we review the historical development of the regional input-output analysis.
基金sponsored by NSFC(Grant No.71073124)National Social Science Fund Key Projects(Grant No.11AZD028)the Central University Basic Scientific Research Funds
文摘Becoming the world's largest emitter of carbon makes China the object of criticism;however,people may ignore the fact that when China exports low-carbon products,the carbon emissions have been left in the meanwhile,forming the so-called"embodied carbon".Using the input-output model,this paper analyzes the carbon emission intensity and amount of embodied carbon of various sectors in China's export trade in 2002 and 2007,and filters out high carbon emission sectors.In addition,this paper also points out the problem of carbon emissions'international transfer from developed countries to China through the analysis of national and regional flow of export carbon emissions and changing of the proportion of emissions for exports relative to total emissions,and explains the reason that caused carbon transfer to China by using the treadmill of production theory.Based on that,this paper proposes some measures for carbon reduction in China from the foreign trade perspective.
基金The authors would like to thank Key Projects in the National Science&Technology Pillar Program during the Twelfth Five Year Plan Period[grant number 2012BAC20B03]Beijing Natural Science Foundation[grant number 9112008]for supporting this research
文摘Under the pressure of sustained growth in energy consumption in China,the implementation of a carbon pricing mechanism is an effective economic policy measure for promoting emission reduction,as well as a hotspot of research among scholars and policy makers.In this paper,the effects of carbon prices on Beijing's economy are analyzed using input-output tables.The carbon price costs are levied in accordance with the products'embodied carbon emission.By calculation,given the carbon price rate of 10 RMB/t-CO_2,the total carbon costs of Beijing account for approximately 0.22-0.40%of its gross revenue the same year.Among all industries,construction bears the largest carbon cost Among export sectors,the coal mining and washing industry has much higher export carbon price intensity than other industries.Apart from traditional energy-intensive industries,tertiary industry,which accounts for more than 70%of Beijing's economy,also bears a major carbon cost because of its large economic size.However,from 2007 to 2010,adjustment of the investment structure has reduced the emission intensity in investment sectors,contributing to the reduction of overall emissions and carbon price intensity.
基金supported by Chiang Mai University Research Fund under the contract number T-M5744
文摘A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input data in accordance with the groups of output data.Then,a set of prototypes are selected from the clustered input data.The inessential data can be ultimately discarded from the data set.The proposed method can reduce the effect from outliers because only the prototypes are used.This method is applied to reduce the data set in regression problems.Two standard synthetic data sets and three standard real-world data sets are used for evaluation.The root-mean-square errors are compared from support vector regression models trained with the original data sets and the corresponding instance-reduced data sets.From the experiments,the proposed method provides good results on the reduction and the reconstruction of the standard synthetic and real-world data sets.The numbers of instances of the synthetic data sets are decreased by 25%-69%.The reduction rates for the real-world data sets of the automobile miles per gallon and the 1990 census in CA are 46% and 57%,respectively.The reduction rate of 96% is very good for the electrocardiogram(ECG) data set because of the redundant and periodic nature of ECG signals.For all of the data sets,the regression results are similar to those from the corresponding original data sets.Therefore,the regression performance of the proposed method is good while only a fraction of the data is needed in the training process.
文摘This paper addresses the robust input-output energy decoupling problem for uncertain singular systems in which all parameter matrices except E exist as time-varying uncertainties. By means of linear matrix inequalities (LMIs), sufficient conditions are derived for the existence of linear state feedback and input transformation control laws, such that the resulting closed-loop uncertain singular system is generalized quadratically stable and the energy of every input controls mainly the energy of a corresponding output, and influences the energy of other outputs as weakly as possible. Keywords Uncertain singular systems - generalized quadratical stability - input-output energy decoupling - linear matrix inequality (LMI) Xin-Zhuang Dong graduated from the Institute of Information Engineering of People’s Liberation Army, China, in 1994. She received the M. S. degree from the Institute of Electronic Technology of People’s Liberation Army, in 1998 and the Ph.D. degree from Northeastern University, China, in 2004. She is currently a post-doctoral fellow at the Key Laboratory of Systems and Control, CAS.Her research interests include singular and nonlinear systems, especially the control of singular systems such as H ∞ control, passive control and dissipative control. Qing-Ling Zhang received the Ph.D. degree from Northeastern University, China, in 1995. He is currently a professor with the Institute of Systems Science, Northeastern University. His research interests include singular systems, fuzzy systems, decentralized control, and H 2/H ∞ control.
基金supported by National Natural Science Foundation of China under Grant Nos.10774163,10774042,and 10747167the State Key Basic Research Program of China under Grant Nos.2005CB724502 and 2006CB921203
文摘We propose a scheme to purify entanglement of two atoms from not-too-impure entangled states by checking the parity of the two atoms through the cavity input-output process. As the parity check is made by measurement on single-photon polarization, which would not affect the entanglement of the two atoms, our scheme has the successful probability double of that in a previous well-known scheme with linear optical elements [Nature （London） 410 （2001） 1067], and is insensitive to the photon loss and the detection inefficieney. Experimental feasibility of our scheme with current technology is discussed.
