In this paper, global input-to-state stability （ISS） for discrete-time piecewise affine systems with time-delay are considered Piecewise quadratic ISS-Lyapunov functions are adopted. Both Lyapunov-Razumikhiu and Lya...In this paper, global input-to-state stability （ISS） for discrete-time piecewise affine systems with time-delay are considered Piecewise quadratic ISS-Lyapunov functions are adopted. Both Lyapunov-Razumikhiu and Lyapunov-Krasovskii methods are used The theorems of Lyapunov-Razumikhin type and Lyapunov-Krasovskii type for piecewise affine systems with time-delay are shown respectively.展开更多
On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the ind...On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the industries of Henan Province and the industries of other regions. I summarize the characteristics of this method based on this as follows: when researching inter-regional economic link, the multi-region or two-region input-output model has prominent superiority, and we can conduct preliminary estimation on the multi-region input-output model using location quotient approach.展开更多
Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvabili...Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvability,continuity and surjectivity,and some fixed point and surjectivity methods in nonlinear analysis were used to deal with these questions. As a result,the main theorems are obtained,which provide some sufficient criterions to solve above questions described by the boundary properties of the enterprises consuming operator.展开更多
This paper deals with the problem of delay size stability analysis of single input-delayed linear and nonlinear systems. Conventional reduction, reduction linked by sliding mode, and linear memoryless control approach...This paper deals with the problem of delay size stability analysis of single input-delayed linear and nonlinear systems. Conventional reduction, reduction linked by sliding mode, and linear memoryless control approaches are used for simple input-delayed systems to obtain the stability conditions. Several first order examples are investigated systematically to demonstrate the capabilities and limitations of the advanced stability analysis techniques including Lyapunov-Krasovskii functionals, Newton-Leibniz formula, and a newly addressed Lagrange mean value theorem. Numerical comparative results show the usefulness and effectiveness of the advanced delay size analysis techniques proposed in this paper.展开更多
Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output ...Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output mechanism under which the change related to energy is surely transmitted to other industries. The price change thus incurred in all industries may adversely affect the realization of macroeconomic objective-maintaining prices at a stable level. It is, therefore, needed to conduct an empirical research related to the impact of price change in energy industry on that in other industries. According to the data coming from “China’s 2015 Input-Output Extension Table (42 Departments)” and four hypothetical basis, this article focuses on four energy sectors and analyzes how deeply the price change of them, by use of input-output model, affects that of other industrial products under five conditions where each of their price rises by 10% individually or simultaneously, and why such an influence occurs. The results show that the price rising of the energies in question leads to an upward growth in the prices of other industrial products, especially when their prices go up simultaneously. Besides, the price increase in the four energy sectors doesn’t influence other industries in an accumulation form but actually leads to a rollback in some of other industries. It is recommended to adopt diversified pricing strategies for different energy products, thus maximizing the value of each specific energy, and meanwhile achieving the goals of energy consumption reduction and price equilibrium.展开更多
In this paper, two types of mathematical models are developed to describe the dynamics of large-scale nonlinear systems, which are composed of several interconnected nonlinear subsystems. Each subsystem can be describ...In this paper, two types of mathematical models are developed to describe the dynamics of large-scale nonlinear systems, which are composed of several interconnected nonlinear subsystems. Each subsystem can be described by an input-output nonlinear discrete-time mathematical model, with unknown, but constant or slowly time-varying parameters. Then, two recursive estimation methods are used to solve the parametric estimation problem for the considered class of the interconnected nonlinear systems. These methods are based on the recursive least squares techniques and the prediction error method. Convergence analysis is provided using the hyper-stability and positivity method and the differential equation approach. A numerical simulation example of the parametric estimation of a stochastic interconnected nonlinear hydraulic system is treated.展开更多
To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed ...To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.展开更多
The development of any analytical method should have to experience at least four stages: its initial status, growth, mature and declining. However, although the regional input-output analysis has been widely applied f...The development of any analytical method should have to experience at least four stages: its initial status, growth, mature and declining. However, although the regional input-output analysis has been widely applied for more than forty years, it is still one of the most important approach in regional economic analysis and forecast at present in the world. This is due to the never ended modifications and its great potentials. In this paper, we review the historical development of the regional input-output analysis.展开更多
The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost ...The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost half bridge （BHB） DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing （ICS） and output current sharing （OCS） of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions （half load and full load）, The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained.展开更多
Under the pressure of sustained growth in energy consumption in China,the implementation of a carbon pricing mechanism is an effective economic policy measure for promoting emission reduction,as well as a hotspot of r...Under the pressure of sustained growth in energy consumption in China,the implementation of a carbon pricing mechanism is an effective economic policy measure for promoting emission reduction,as well as a hotspot of research among scholars and policy makers.In this paper,the effects of carbon prices on Beijing's economy are analyzed using input-output tables.The carbon price costs are levied in accordance with the products'embodied carbon emission.By calculation,given the carbon price rate of 10 RMB/t-CO_2,the total carbon costs of Beijing account for approximately 0.22-0.40%of its gross revenue the same year.Among all industries,construction bears the largest carbon cost Among export sectors,the coal mining and washing industry has much higher export carbon price intensity than other industries.Apart from traditional energy-intensive industries,tertiary industry,which accounts for more than 70%of Beijing's economy,also bears a major carbon cost because of its large economic size.However,from 2007 to 2010,adjustment of the investment structure has reduced the emission intensity in investment sectors,contributing to the reduction of overall emissions and carbon price intensity.展开更多
In this paper, an Independent Window-Access(IWA) scheme is proposed, and the performance of an input-buffered ATM switching fabric with the IWA scheme is analysed by means of a probability generating function approach...In this paper, an Independent Window-Access(IWA) scheme is proposed, and the performance of an input-buffered ATM switching fabric with the IWA scheme is analysed by means of a probability generating function approach, the closed formulas of the average cell delay and the maximum throughput are given, and results show that the IWA scheme makes the switching fabric have better performances than traditional window-access scheme. The computer simulation results are in good agreement with these analytical results.展开更多
Environmentally Extended Input-Output(EEIO)tables have become a powerful element in supporting information-based environmental and economic policies.National-and provincial-level 10 tables are currently published by t...Environmentally Extended Input-Output(EEIO)tables have become a powerful element in supporting information-based environmental and economic policies.National-and provincial-level 10 tables are currently published by the National Bureau of Statistics of the People's Republic of China according to well-defined conventions.However,county-level 10tables are not provided as a rule by official statistics organizations.This paper conducts an overview of compiling EEIO tables for environmental and resources accounting at the county level and then answers several questions:First,what kind of data should be prepared for the compilation of county-level EEIO tables?Second,how can we set up comprehensive EEIO tables at the county level?Third,regarding the survey methods and the indirect modeling,which one should be chosen to build EEIO tables at the county level?Finally,what policy questions could such a table answer?EEIO tables at the county level can be used to predict the economic impacts of environmental policies and to perform trend and scenario analysis.展开更多
Becoming the world's largest emitter of carbon makes China the object of criticism;however,people may ignore the fact that when China exports low-carbon products,the carbon emissions have been left in the meanwhil...Becoming the world's largest emitter of carbon makes China the object of criticism;however,people may ignore the fact that when China exports low-carbon products,the carbon emissions have been left in the meanwhile,forming the so-called"embodied carbon".Using the input-output model,this paper analyzes the carbon emission intensity and amount of embodied carbon of various sectors in China's export trade in 2002 and 2007,and filters out high carbon emission sectors.In addition,this paper also points out the problem of carbon emissions'international transfer from developed countries to China through the analysis of national and regional flow of export carbon emissions and changing of the proportion of emissions for exports relative to total emissions,and explains the reason that caused carbon transfer to China by using the treadmill of production theory.Based on that,this paper proposes some measures for carbon reduction in China from the foreign trade perspective.展开更多
The aim of this paper is to analyze the Mexican energy system and its greenhouse gas (GHG) emissions for the year 2012 and to estimate a baseline scenario for 2026 using an input-output analysis. The elasticity of emi...The aim of this paper is to analyze the Mexican energy system and its greenhouse gas (GHG) emissions for the year 2012 and to estimate a baseline scenario for 2026 using an input-output analysis. The elasticity of emissions with respect to national demand is calculated in order to identify the total and distributed effects of CO2 equivalent (CO2-eq) emissions. In this framework, the analysis evaluates the effects in the economy related to changes in individual sector demands, and, vice versa, the effect on individual sectors due to global changes in national demands. Results show that passenger and freight transport, power generation, iron and steel industry, chemical industry, air transportation and agriculture concentrate the largest potential for mitigation strategies, and also have important distributive effects on the Mexican economy. Results are evaluated under the mitigation strategies of industrial sector proposed by the Fifth Assessment Report of the IPCC.展开更多
The input-output pollution control model given in [1] is generalized. The generalization makes it easier for the model to handle many problem instances. A linear program is used to solve the new model. An example is g...The input-output pollution control model given in [1] is generalized. The generalization makes it easier for the model to handle many problem instances. A linear program is used to solve the new model. An example is given to show that the new model can handle classes of problems that the original model cannot handle.展开更多
A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input d...A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input data in accordance with the groups of output data.Then,a set of prototypes are selected from the clustered input data.The inessential data can be ultimately discarded from the data set.The proposed method can reduce the effect from outliers because only the prototypes are used.This method is applied to reduce the data set in regression problems.Two standard synthetic data sets and three standard real-world data sets are used for evaluation.The root-mean-square errors are compared from support vector regression models trained with the original data sets and the corresponding instance-reduced data sets.From the experiments,the proposed method provides good results on the reduction and the reconstruction of the standard synthetic and real-world data sets.The numbers of instances of the synthetic data sets are decreased by 25%-69%.The reduction rates for the real-world data sets of the automobile miles per gallon and the 1990 census in CA are 46% and 57%,respectively.The reduction rate of 96% is very good for the electrocardiogram(ECG) data set because of the redundant and periodic nature of ECG signals.For all of the data sets,the regression results are similar to those from the corresponding original data sets.Therefore,the regression performance of the proposed method is good while only a fraction of the data is needed in the training process.展开更多
This paper addresses the robust input-output energy decoupling problem for uncertain singular systems in which all parameter matrices except E exist as time-varying uncertainties. By means of linear matrix inequalitie...This paper addresses the robust input-output energy decoupling problem for uncertain singular systems in which all parameter matrices except E exist as time-varying uncertainties. By means of linear matrix inequalities (LMIs), sufficient conditions are derived for the existence of linear state feedback and input transformation control laws, such that the resulting closed-loop uncertain singular system is generalized quadratically stable and the energy of every input controls mainly the energy of a corresponding output, and influences the energy of other outputs as weakly as possible. Keywords Uncertain singular systems - generalized quadratical stability - input-output energy decoupling - linear matrix inequality (LMI) Xin-Zhuang Dong graduated from the Institute of Information Engineering of People’s Liberation Army, China, in 1994. She received the M. S. degree from the Institute of Electronic Technology of People’s Liberation Army, in 1998 and the Ph.D. degree from Northeastern University, China, in 2004. She is currently a post-doctoral fellow at the Key Laboratory of Systems and Control, CAS.Her research interests include singular and nonlinear systems, especially the control of singular systems such as H ∞ control, passive control and dissipative control. Qing-Ling Zhang received the Ph.D. degree from Northeastern University, China, in 1995. He is currently a professor with the Institute of Systems Science, Northeastern University. His research interests include singular systems, fuzzy systems, decentralized control, and H 2/H ∞ control.展开更多
This paper analyzes the citrus input-output efficiency by using the DEA-Malmquist productivity index methods based on the data of six counties in Jiangxi Province from 2010 to 2013.The result shows that TFP of Jiangxi...This paper analyzes the citrus input-output efficiency by using the DEA-Malmquist productivity index methods based on the data of six counties in Jiangxi Province from 2010 to 2013.The result shows that TFP of Jiangxi citrus is at low level overall,but the development is rapid.Technological progress is the driving force to promote productivity growth.Based on the static analysis study of six counties in 2013,it is found that the available input factors on the whole are in an ideal condition,and the citrus input factors in a few counties are redundant.Therefore,according to the results,the following policy recommendations are proposed:speeding up the intensive production of citrus in Jiangxi Province,to maximize the scale effect;adjusting the input ratio of various factors of production,so as to improve the citrus input-output efficiency.展开更多
基金supported by National Natural Science Foundation of China (No. 60874006)Natural Science Foundation of Hei-longjiang Province for Youth (No. QC2009C99)
文摘In this paper, global input-to-state stability （ISS） for discrete-time piecewise affine systems with time-delay are considered Piecewise quadratic ISS-Lyapunov functions are adopted. Both Lyapunov-Razumikhiu and Lyapunov-Krasovskii methods are used The theorems of Lyapunov-Razumikhin type and Lyapunov-Krasovskii type for piecewise affine systems with time-delay are shown respectively.
基金Supported by Project of Henan Provincial Department of Science and Technology (112400410017)Project of Henan Provincial Department of Education (2010-QN-008)
文摘On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the industries of Henan Province and the industries of other regions. I summarize the characteristics of this method based on this as follows: when researching inter-regional economic link, the multi-region or two-region input-output model has prominent superiority, and we can conduct preliminary estimation on the multi-region input-output model using location quotient approach.
文摘Based on the classical(matrix type)input-output analysis,a type of nonlinear (continuous type) conditional Leontief model,input-output equation were introduced,as well as three corresponding questions,namely,solvability,continuity and surjectivity,and some fixed point and surjectivity methods in nonlinear analysis were used to deal with these questions. As a result,the main theorems are obtained,which provide some sufficient criterions to solve above questions described by the boundary properties of the enterprises consuming operator.
文摘This paper deals with the problem of delay size stability analysis of single input-delayed linear and nonlinear systems. Conventional reduction, reduction linked by sliding mode, and linear memoryless control approaches are used for simple input-delayed systems to obtain the stability conditions. Several first order examples are investigated systematically to demonstrate the capabilities and limitations of the advanced stability analysis techniques including Lyapunov-Krasovskii functionals, Newton-Leibniz formula, and a newly addressed Lagrange mean value theorem. Numerical comparative results show the usefulness and effectiveness of the advanced delay size analysis techniques proposed in this paper.
文摘Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output mechanism under which the change related to energy is surely transmitted to other industries. The price change thus incurred in all industries may adversely affect the realization of macroeconomic objective-maintaining prices at a stable level. It is, therefore, needed to conduct an empirical research related to the impact of price change in energy industry on that in other industries. According to the data coming from “China’s 2015 Input-Output Extension Table (42 Departments)” and four hypothetical basis, this article focuses on four energy sectors and analyzes how deeply the price change of them, by use of input-output model, affects that of other industrial products under five conditions where each of their price rises by 10% individually or simultaneously, and why such an influence occurs. The results show that the price rising of the energies in question leads to an upward growth in the prices of other industrial products, especially when their prices go up simultaneously. Besides, the price increase in the four energy sectors doesn’t influence other industries in an accumulation form but actually leads to a rollback in some of other industries. It is recommended to adopt diversified pricing strategies for different energy products, thus maximizing the value of each specific energy, and meanwhile achieving the goals of energy consumption reduction and price equilibrium.
基金supported by the Ministry of Higher Education and Scientific Research of Tunisia
文摘In this paper, two types of mathematical models are developed to describe the dynamics of large-scale nonlinear systems, which are composed of several interconnected nonlinear subsystems. Each subsystem can be described by an input-output nonlinear discrete-time mathematical model, with unknown, but constant or slowly time-varying parameters. Then, two recursive estimation methods are used to solve the parametric estimation problem for the considered class of the interconnected nonlinear systems. These methods are based on the recursive least squares techniques and the prediction error method. Convergence analysis is provided using the hyper-stability and positivity method and the differential equation approach. A numerical simulation example of the parametric estimation of a stochastic interconnected nonlinear hydraulic system is treated.
文摘To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.
文摘The development of any analytical method should have to experience at least four stages: its initial status, growth, mature and declining. However, although the regional input-output analysis has been widely applied for more than forty years, it is still one of the most important approach in regional economic analysis and forecast at present in the world. This is due to the never ended modifications and its great potentials. In this paper, we review the historical development of the regional input-output analysis.
文摘The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost half bridge （BHB） DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing （ICS） and output current sharing （OCS） of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions （half load and full load）, The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained.
基金The authors would like to thank Key Projects in the National Science&Technology Pillar Program during the Twelfth Five Year Plan Period[grant number 2012BAC20B03]Beijing Natural Science Foundation[grant number 9112008]for supporting this research
文摘Under the pressure of sustained growth in energy consumption in China,the implementation of a carbon pricing mechanism is an effective economic policy measure for promoting emission reduction,as well as a hotspot of research among scholars and policy makers.In this paper,the effects of carbon prices on Beijing's economy are analyzed using input-output tables.The carbon price costs are levied in accordance with the products'embodied carbon emission.By calculation,given the carbon price rate of 10 RMB/t-CO_2,the total carbon costs of Beijing account for approximately 0.22-0.40%of its gross revenue the same year.Among all industries,construction bears the largest carbon cost Among export sectors,the coal mining and washing industry has much higher export carbon price intensity than other industries.Apart from traditional energy-intensive industries,tertiary industry,which accounts for more than 70%of Beijing's economy,also bears a major carbon cost because of its large economic size.However,from 2007 to 2010,adjustment of the investment structure has reduced the emission intensity in investment sectors,contributing to the reduction of overall emissions and carbon price intensity.
文摘In this paper, an Independent Window-Access(IWA) scheme is proposed, and the performance of an input-buffered ATM switching fabric with the IWA scheme is analysed by means of a probability generating function approach, the closed formulas of the average cell delay and the maximum throughput are given, and results show that the IWA scheme makes the switching fabric have better performances than traditional window-access scheme. The computer simulation results are in good agreement with these analytical results.
基金supported by the Key Project of the Chinese Academy of Sciences[grant number KZZD-EW-08]the Exploratory Forefront Project for the Strategic Science Plan in IGSNRR,CAS
文摘Environmentally Extended Input-Output(EEIO)tables have become a powerful element in supporting information-based environmental and economic policies.National-and provincial-level 10 tables are currently published by the National Bureau of Statistics of the People's Republic of China according to well-defined conventions.However,county-level 10tables are not provided as a rule by official statistics organizations.This paper conducts an overview of compiling EEIO tables for environmental and resources accounting at the county level and then answers several questions:First,what kind of data should be prepared for the compilation of county-level EEIO tables?Second,how can we set up comprehensive EEIO tables at the county level?Third,regarding the survey methods and the indirect modeling,which one should be chosen to build EEIO tables at the county level?Finally,what policy questions could such a table answer?EEIO tables at the county level can be used to predict the economic impacts of environmental policies and to perform trend and scenario analysis.
基金sponsored by NSFC(Grant No.71073124)National Social Science Fund Key Projects(Grant No.11AZD028)the Central University Basic Scientific Research Funds
文摘Becoming the world's largest emitter of carbon makes China the object of criticism;however,people may ignore the fact that when China exports low-carbon products,the carbon emissions have been left in the meanwhile,forming the so-called"embodied carbon".Using the input-output model,this paper analyzes the carbon emission intensity and amount of embodied carbon of various sectors in China's export trade in 2002 and 2007,and filters out high carbon emission sectors.In addition,this paper also points out the problem of carbon emissions'international transfer from developed countries to China through the analysis of national and regional flow of export carbon emissions and changing of the proportion of emissions for exports relative to total emissions,and explains the reason that caused carbon transfer to China by using the treadmill of production theory.Based on that,this paper proposes some measures for carbon reduction in China from the foreign trade perspective.
文摘The aim of this paper is to analyze the Mexican energy system and its greenhouse gas (GHG) emissions for the year 2012 and to estimate a baseline scenario for 2026 using an input-output analysis. The elasticity of emissions with respect to national demand is calculated in order to identify the total and distributed effects of CO2 equivalent (CO2-eq) emissions. In this framework, the analysis evaluates the effects in the economy related to changes in individual sector demands, and, vice versa, the effect on individual sectors due to global changes in national demands. Results show that passenger and freight transport, power generation, iron and steel industry, chemical industry, air transportation and agriculture concentrate the largest potential for mitigation strategies, and also have important distributive effects on the Mexican economy. Results are evaluated under the mitigation strategies of industrial sector proposed by the Fifth Assessment Report of the IPCC.
文摘The input-output pollution control model given in [1] is generalized. The generalization makes it easier for the model to handle many problem instances. A linear program is used to solve the new model. An example is given to show that the new model can handle classes of problems that the original model cannot handle.
基金supported by Chiang Mai University Research Fund under the contract number T-M5744
文摘A method that applies clustering technique to reduce the number of samples of large data sets using input-output clustering is proposed.The proposed method clusters the output data into groups and clusters the input data in accordance with the groups of output data.Then,a set of prototypes are selected from the clustered input data.The inessential data can be ultimately discarded from the data set.The proposed method can reduce the effect from outliers because only the prototypes are used.This method is applied to reduce the data set in regression problems.Two standard synthetic data sets and three standard real-world data sets are used for evaluation.The root-mean-square errors are compared from support vector regression models trained with the original data sets and the corresponding instance-reduced data sets.From the experiments,the proposed method provides good results on the reduction and the reconstruction of the standard synthetic and real-world data sets.The numbers of instances of the synthetic data sets are decreased by 25%-69%.The reduction rates for the real-world data sets of the automobile miles per gallon and the 1990 census in CA are 46% and 57%,respectively.The reduction rate of 96% is very good for the electrocardiogram(ECG) data set because of the redundant and periodic nature of ECG signals.For all of the data sets,the regression results are similar to those from the corresponding original data sets.Therefore,the regression performance of the proposed method is good while only a fraction of the data is needed in the training process.
文摘This paper addresses the robust input-output energy decoupling problem for uncertain singular systems in which all parameter matrices except E exist as time-varying uncertainties. By means of linear matrix inequalities (LMIs), sufficient conditions are derived for the existence of linear state feedback and input transformation control laws, such that the resulting closed-loop uncertain singular system is generalized quadratically stable and the energy of every input controls mainly the energy of a corresponding output, and influences the energy of other outputs as weakly as possible. Keywords Uncertain singular systems - generalized quadratical stability - input-output energy decoupling - linear matrix inequality (LMI) Xin-Zhuang Dong graduated from the Institute of Information Engineering of People’s Liberation Army, China, in 1994. She received the M. S. degree from the Institute of Electronic Technology of People’s Liberation Army, in 1998 and the Ph.D. degree from Northeastern University, China, in 2004. She is currently a post-doctoral fellow at the Key Laboratory of Systems and Control, CAS.Her research interests include singular and nonlinear systems, especially the control of singular systems such as H ∞ control, passive control and dissipative control. Qing-Ling Zhang received the Ph.D. degree from Northeastern University, China, in 1995. He is currently a professor with the Institute of Systems Science, Northeastern University. His research interests include singular systems, fuzzy systems, decentralized control, and H 2/H ∞ control.
文摘This paper analyzes the citrus input-output efficiency by using the DEA-Malmquist productivity index methods based on the data of six counties in Jiangxi Province from 2010 to 2013.The result shows that TFP of Jiangxi citrus is at low level overall,but the development is rapid.Technological progress is the driving force to promote productivity growth.Based on the static analysis study of six counties in 2013,it is found that the available input factors on the whole are in an ideal condition,and the citrus input factors in a few counties are redundant.Therefore,according to the results,the following policy recommendations are proposed:speeding up the intensive production of citrus in Jiangxi Province,to maximize the scale effect;adjusting the input ratio of various factors of production,so as to improve the citrus input-output efficiency.
