For the uncertain continuous-time systems with input time-delay that widely exist in the production processes, we can get the existent conditions for the guaranteed cost control of these systems by using the Lyapunov ...For the uncertain continuous-time systems with input time-delay that widely exist in the production processes, we can get the existent conditions for the guaranteed cost control of these systems by using the Lyapunov stability theory, linear matrix inequalities theory and quadratic cost criterion. We can achieve the guaranteed cost control of this system by solving a matrix inequality. A state feed back guaranteed cost control law can be constructed by solving certain parameter-dependent Riccati matrix equation.展开更多
A unknown input observer （UIO） design for a class of linear time-delay systems when the observer error can＇t completely decouple from unknown input is dealt with. A sufficient condition to its existence is presente...A unknown input observer （UIO） design for a class of linear time-delay systems when the observer error can＇t completely decouple from unknown input is dealt with. A sufficient condition to its existence is presented based on Lyapunov stability method. Design problem of the proposed observer is formulated in term of linear matrix inequalities. Two design problems of the observer with internal delay and without internal delay are formulated. Based on H∞ control theory in time-delay systems, the proposed observer is designed in term of linear matrix inequalities （LMI）. A design algorithm is proposed. The effective of the proposed approach is illustrated by a numerical example.展开更多
The design of a functional observer and reduced-order observer with internal delay for linear singular timedelay systems with unknown inputs is discussed. The sufficient conditions of the existence of observers, which...The design of a functional observer and reduced-order observer with internal delay for linear singular timedelay systems with unknown inputs is discussed. The sufficient conditions of the existence of observers, which are normal linear time-delay systems, and the corresponding design steps are presented via linear matrix inequality（LMI）. Moreover, the observer-based feedback stabilizing controller is obtained. Three examples are given to show the effectiveness of the proposed methods.展开更多
This paper proposes a robust fault detection and isolation (FDI) scheme for discrete time-delay system with disturbance. The FDI scheme can not only detect but also isolate the faults. The lifting method is exploited ...This paper proposes a robust fault detection and isolation (FDI) scheme for discrete time-delay system with disturbance. The FDI scheme can not only detect but also isolate the faults. The lifting method is exploited to transform the discrete time-delay system into the non-time-delay form. A generalized structured residual set is designed based on the unknown input observer (UIO). For each residual generator, one of the system input signals together with the corresponding actuator fault and the disturbance signals are treated as an unknown input term. The residual signals can not only be robust against the disturbance, but also be of the capacity to isolate the actuator faults. The proposed method has been verified by a numerical example.展开更多
In this paper, global input-to-state stability （ISS） for discrete-time piecewise affine systems with time-delay are considered Piecewise quadratic ISS-Lyapunov functions are adopted. Both Lyapunov-Razumikhiu and Lya...In this paper, global input-to-state stability （ISS） for discrete-time piecewise affine systems with time-delay are considered Piecewise quadratic ISS-Lyapunov functions are adopted. Both Lyapunov-Razumikhiu and Lyapunov-Krasovskii methods are used The theorems of Lyapunov-Razumikhin type and Lyapunov-Krasovskii type for piecewise affine systems with time-delay are shown respectively.展开更多
A composite anti-disturbance predictive control strategy employing a Multi-dimensional Taylor Network(MTN)is presented for unmanned systems subject to time-delay and multi-source disturbances.First,the multi-source di...A composite anti-disturbance predictive control strategy employing a Multi-dimensional Taylor Network(MTN)is presented for unmanned systems subject to time-delay and multi-source disturbances.First,the multi-source disturbances are addressed according to their specific characteristics as follows:(A)an MTN data-driven model,which is used for uncertainty description,is designed accompanied with the mechanism model to represent the unmanned systems;(B)an adaptive MTN filter is used to remove the influence of the internal disturbance;(C)an MTN disturbance observer is constructed to estimate and compensate for the influence of the external disturbance;(D)the Extended Kalman Filter(EKF)algorithm is utilized as the learning mechanism for MTNs.Second,to address the time-delay effect,a recursiveτstep-ahead MTN predictive model is designed utilizing recursive technology,aiming to mitigate the impact of time-delay,and the EKF algorithm is employed as its learning mechanism.Then,the MTN predictive control law is designed based on the quadratic performance index.By implementing the proposed composite controller to unmanned systems,simultaneous feedforward compensation and feedback suppression to the multi-source disturbances are conducted.Finally,the convergence of the MTN and the stability of the closed-loop system are established utilizing the Lyapunov theorem.Two exemplary applications of unmanned systems involving unmanned vehicle and rigid spacecraft are presented to validate the effectiveness of the proposed approach.展开更多
This paper discusses the design of event-triggered output-feedback controller for a class of nonlinear time-delay systems with multiple uncertainties. In sharp contrast to previous works, the considered systems posses...This paper discusses the design of event-triggered output-feedback controller for a class of nonlinear time-delay systems with multiple uncertainties. In sharp contrast to previous works, the considered systems possess two important characteristics: (i) The uncertain nonlinear terms meet the linearly unmeasurable-states dependent growth with the growth rate being an unknown function of the input and output. (ii) There exist input matching uncertainty and unknown measurement sensitivity. By introducing a single dynamic gain and employing a cleverly devised event-triggering mechanism (ETM), we design a new gain-based event-triggered output-feedback controller, which globally regulates all states of the considered systems and maintains global boundedness of the closed-loop system. Furthermore, the estimation of input matching uncertainty achieves convergence towards its actual value, and Zeno behavior does not happen. Two simulation examples including a practical one show that the proposed approach is effective.展开更多
This study investigates the nonlinear resonance responses of suspended cables subjected to multi-frequency excitations and time-delayed feedback.Two specific combinations and simultaneous resonances are selected for d...This study investigates the nonlinear resonance responses of suspended cables subjected to multi-frequency excitations and time-delayed feedback.Two specific combinations and simultaneous resonances are selected for detailed examination.Initially,utilizing Hamilton’s variational principle,a nonlinear vibration control model of suspended cables under multi-frequency excitations and longitudinal time-delayed velocity feedback is developed,and the Galerkin method is employed to obtain the discrete model.Subsequently,focusing solely on single-mode discretization,analytical solutions for the two simultaneous resonances are derived using the method of multiple scales.The frequency response equations are derived,and the stability analysis is presented for two simultaneous resonance cases.The results demonstrate that suspended cables exhibit complex nonlinearity under multi-frequency excitations.Multiple solutions under multi-frequency excitation can be distinguished through the frequency–response and the detuning-phase curves.By adjusting the control gain and time delay,the resonance range,response amplitude,and phase of suspended cables can be modified.展开更多
In the industrial roller kiln,the time-delay characteristic in heat transfer causes the temperature field to be affected by both the current and historical temperature states.It presents a poor control performance and...In the industrial roller kiln,the time-delay characteristic in heat transfer causes the temperature field to be affected by both the current and historical temperature states.It presents a poor control performance and brings a significant challenge to the process precise control.Considering high complexity of precise modeling,a data-driven time-delay optimal control method for temperature field of roller kiln is proposed based on a large amount of process data.First,the control challenges and problem description brought by time-delay are demonstrated,where the cost function for the time-delay partial differential equation system is constructed.To obtain the optimal control law,the policy iteration in adaptive dynamic programming is adopted to design the time-delay temperature field controller,and neural network is used for the critic network in policy iteration to approximate the optimal time-delay cost function.The closed-loop system stability is proved by designing the Lyapunov function which contains the time-delay information.Finally,through establishing the time-delay temperature field model for roller kiln,the effectiveness and convergence of the proposed method is verified and proved.展开更多
Single-phase,non-isolated microinverters used in photovoltaic(PV)systems commonly encounter two persistent challenges:High-frequency leakage current and fluctuating power delivery.This paper presents a novel single-ph...Single-phase,non-isolated microinverters used in photovoltaic(PV)systems commonly encounter two persistent challenges:High-frequency leakage current and fluctuating power delivery.This paper presents a novel single-phase,non-isolated,multi-input microinverter topology with a common-ground structure that effectively eliminates ground leakage current without requiring additional active components.The proposed microinverter architecture integrates a dual-boost configuration and uses only four active switches.This is especially advantageous in terms of the component count,which is beneficial to enhance reliability,reduce cost,and simplify the overall system design.With one,two,or four PV inputs,it can operate without interruption under unbalanced voltage or partial shading and even if some inputs drop to zero.A tailored modulation scheme minimizes conduction losses while maintaining a stable direct-current(DC)-link voltage,and a decoupling capacitor efficiently absorbs the single-phase pulsating power,thus overcoming one major limitation in existing microinverter designs.By validating with a 1-kW GaN-based prototype,both the simulated and experimental results demonstrate its high efficiency,robustness,and practical suitability for cost-effective PV applications,with a peak efficiency value of 94.8%.展开更多
This study investigates the impact of welding heat input on weldments of modified 9Cr-1Mo(P91)steel,a high-strength material that requires high-energy welding processes like submerged arc welding.In the as-welded cond...This study investigates the impact of welding heat input on weldments of modified 9Cr-1Mo(P91)steel,a high-strength material that requires high-energy welding processes like submerged arc welding.In the as-welded condition,P91 steel welds primarily consist of untempered martensite,which transforms into tempered martensite during post-weld heat treatment(PWHT).Electron spectro-scopy analysis reveals the presence of M_(23)C_(6) and MX carbonitride precipitates at grain boundaries.Increasing the heat input leads to greater quantities of precipitates in the prior austenite grain boundaries,which can affect material properties.Weldment hardness profiles exhibit modest improvements,while ultimate tensile strength and toughness decrease with higher welding heat input,poten-tially due to the formation of a ferritic phase.Residual stress distributions are noticeably influenced by the welding heat input level.展开更多
To ensure the safety of power energy transmission channel and mitigate the harm caused by galloping of iced transmission lines,the axial time-delay velocity feedback strategy is adopted to suppress the galloping.The p...To ensure the safety of power energy transmission channel and mitigate the harm caused by galloping of iced transmission lines,the axial time-delay velocity feedback strategy is adopted to suppress the galloping.The par-tial differential equation of galloping with axial time-delay velocity feedback strategy is established based on the variational principle for Hamiltonian.Then,the partial differential equation of galloping is transformed into or-dinary differential equation based on normalization and the Galerkin method.The primary amplitude-frequency response equation,the first-order steady-state approximate solution,and the harmonic amplitude-frequency re-sponse equation are derived by the multiscale method.The impact of different parameters such as time-delay value,control coefficient,and amplitude of external excitation on the galloping response are analyzed.The am-plitude under the primary resonance exhibits periodicity as time-delay value varies.The amplitude diminishes with increased control coefficient and increases with external excitation.Comprehensive consideration of vari-ous influences of parameters on vibration characteristics is crucial when employing the axial time-delay velocity feedback strategy to suppress galloping.Therefore,to achieve the best vibration suppression effect,it is crucial to adjust the time-delay parameter for modifying the range and amplitude of the resonance zone.The conclusions obtained by this study are expected to advance the refinement of active control techniques for iced transmission lines,and may provide valuable insights for practical engineering applications.展开更多
In this paper,Desulfovibrio vulgaris corrosion of X80 steel welded joint with different heat inputs was carefully investigated.The results confirmed that in the sterile medium,general corrosion rate and lo-calized cor...In this paper,Desulfovibrio vulgaris corrosion of X80 steel welded joint with different heat inputs was carefully investigated.The results confirmed that in the sterile medium,general corrosion rate and lo-calized corrosion susceptibility of heat affected zone(HAZ)were higher than those of weld zone(WZ)and base metal(BM).In the inoculated medium,the general corrosion rate of HAZ was still higher than that of WZ and BM.However,the number and depth of corrosion pits on WZ and BM surfaces,as well as the localized corrosion susceptibility,were much higher than those in HAZ,which was opposite to that in sterile environment,suggesting that the Desulfovibrio vulgaris corrosion of the welded joint was selective.With heat input increasing from 0.57 kJ/mm to 1.29 kJ/mm,general corrosion rate and localized corrosion susceptibility of HAZ and WZ simultaneously decreased in sterile or inoculated medium.In in-oculated medium,localized corrosion of HAZ decreased more sharply than weld zone.Within the range of heat inputs tested,the study discerned a positive correlation:higher heat inputs correlated with an enhanced corrosion resistance of welded joint,irrespective of environmental conditions being sterile or inoculated.The findings provide a solid basis for the welding parameter determination to steel pipelines in oil and gas transportation.展开更多
To analyze the correlation between the input energy parameters(V_(E))and typical intensity measures(IMs)of offshore ground motions,based on 273 earthquake events recorded by the K-NET in Japan,892 offshore ground moti...To analyze the correlation between the input energy parameters(V_(E))and typical intensity measures(IMs)of offshore ground motions,based on 273 earthquake events recorded by the K-NET in Japan,892 offshore ground motion records with moment magnitudes from 4.0 to 7.0 were used in this study.Residuals obtained through a ground motion model were calculated and analyzed for the correlation between V_(E) and amplitude,duration,frequency content and cumulative IMs.The results indicate that PGV and PGD have strong correlation with the V_(E)(T>0.2 s and T>0.4 s),the duration IMs have weakly negative correlation with the V_(E),Sd_(1) has a strong correlation with the V_(E) in the periods of T>0.4 s,T_(g) has a weak correlation with V_(E) and the cumulative IMs have strong correlation with the V_(E).The parametric predictive equations between typical IMs and V_(E) was proposed,and the differences between the prediction equations from the onshore ground motion records were compared.The differences in parametric predicted equations between offshore and onshore ground motions were confirmed in this study.Proposed correlation equations can be applied to offshore probabilistic seismic hazard analysis and the selection of ground motion records by generalized conditional intensity measures.展开更多
This paper proposes a novel multivalued recurrent neural network model driven by external inputs,along with two innovative learning algorithms.By incorporating a multivalued activation function,the proposed model can ...This paper proposes a novel multivalued recurrent neural network model driven by external inputs,along with two innovative learning algorithms.By incorporating a multivalued activation function,the proposed model can achieve multivalued many-to-one associative memory,and the newly developed algorithms enable effective storage of many-to-one patterns in the coefficient matrix while maintaining the indispensability of inputs in many-to-one associative memory.The proposed learning algorithm addresses a critical limitation of existing models which fail to ensure completely erroneous outputs when facing partial input missing in many-to-one associative memory tasks.The methodology is rigorously derived through theoretical analysis,incorporating comprehensive verification of both the existence and global exponential stability of equilibrium points.Demonstrative examples are provided in the paper to show the effectiveness of the proposed theory.展开更多
Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncerta...Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncertain systems characterized by unknown control directions and time-varying input delay lacks comprehensive solutions.In this paper,we propose an observerbased adaptive tracking controller to address this gap.Neural networks are utilized to handle uncertainty,and a unique coordinate transformation is employed to untangle the coupling between input delay and unknown control directions.Subsequently,a new auxiliary signal counters the impact of time-varying input delay,while a Nussbaum function is introduced to solve the problem of unknown control directions.The leverage of an advanced dynamic surface control technique avoids the“complexity explosion”and reduces boundary layer errors.Synthesizing these techniques ensures that all the closed-loop signals are semi-globally uniformly ultimately bounded(SGUUB),and the tracking error converges to a small region around the origin by selecting suitable parameters.Simulation examples are provided to demonstrate the feasibility of the proposed approach.展开更多
This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance ...This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance control scheme is proposed,which enables the lateral position error of the vehicle to be kept within the prescribed performance boundaries all the time.This is achieved by firstly introducing an improved performance function into the controller design such that the stringent initial condition requirements can be relaxed,which further allows the global prescribed performance control result,and then,developing a multivariable adaptive terminal sliding mode based controller such that both input saturation and parameter uncertainties are handled effectively,which further ensures the robust lane-keeping control.Finally,the proposed control strategy is validated through numerical simulations,demonstrating its effectiveness.展开更多
The effects of Ti/N ratio on the number densities of nano particles,the size of the prior austenite grain(PAG)and the toughness of the heat-affected zone(HAZ)of Mg-deoxidized steels were studied after high heat input ...The effects of Ti/N ratio on the number densities of nano particles,the size of the prior austenite grain(PAG)and the toughness of the heat-affected zone(HAZ)of Mg-deoxidized steels were studied after high heat input welding of 400 kJ/cm.With increasing the Ti/N ratio from 2.7 to 5.7,the cuboid nano-sized particles are formed,and their number density increases.The area fractions of ductile intragranular acicular ferrites(IAFs)have the highest value and the area fractions of brittle microstructures of ferrite side plates and upper bainites have the lowest value in TN30 steel.With the Ti/N ratio of about 3.0,the HAZ of steel plate has the best low-temperature toughness.With increasing the Ti/N ratio from 2.7 to 5.7,the PAG sizes after the high-temperature laser scanning confocal microscopy observation decrease linearly with increasing the number densities of nano-sized particles.The PAG size of TN30 steel is between 100 and 150μm,which is conducive to the nucleation of IAFs.展开更多
Unknown time-varying periodic disturbances and input delays can degrade control performance and even lead to system instability.This paper presents a novel direct adaptive output feedback controller based on the inter...Unknown time-varying periodic disturbances and input delays can degrade control performance and even lead to system instability.This paper presents a novel direct adaptive output feedback controller based on the internal model principle(IMP)to compensate for the unknown time-varying periodic disturbance in input delay systems.To reduce the design difficulty of the controller,the input delay system is equivalent to an input delay-free system by constructing stable auxiliary systems.Next,all the stabilizing controllers of the input delay system are derived by using the Youla parameterization method.Based on the IMP,an interpolation condition to completely compensate for periodic disturbances is formulated.Then,to compensate for the unknown time-varying periodic disturbance,a parameter adaptive algorithm is designed to update the Q-parameters online.The convergence of adaptive algorithms is analyzed by the Lyapunov function theory.Simulation and experimental results validated the effectiveness of the proposed method.展开更多
文摘For the uncertain continuous-time systems with input time-delay that widely exist in the production processes, we can get the existent conditions for the guaranteed cost control of these systems by using the Lyapunov stability theory, linear matrix inequalities theory and quadratic cost criterion. We can achieve the guaranteed cost control of this system by solving a matrix inequality. A state feed back guaranteed cost control law can be constructed by solving certain parameter-dependent Riccati matrix equation.
基金This project was supported by the National Natural Science Foundation of China(60374024)
文摘A unknown input observer （UIO） design for a class of linear time-delay systems when the observer error can＇t completely decouple from unknown input is dealt with. A sufficient condition to its existence is presented based on Lyapunov stability method. Design problem of the proposed observer is formulated in term of linear matrix inequalities. Two design problems of the observer with internal delay and without internal delay are formulated. Based on H∞ control theory in time-delay systems, the proposed observer is designed in term of linear matrix inequalities （LMI）. A design algorithm is proposed. The effective of the proposed approach is illustrated by a numerical example.
基金the National Natural Science Foundation of China (No. 50477042)the Ph.D. Programs Foundation of Ministry of Education of China (No. 20040422052 )the National Natural Science Foundation of Shandong Province (No.Z2004G04)
文摘The design of a functional observer and reduced-order observer with internal delay for linear singular timedelay systems with unknown inputs is discussed. The sufficient conditions of the existence of observers, which are normal linear time-delay systems, and the corresponding design steps are presented via linear matrix inequality（LMI）. Moreover, the observer-based feedback stabilizing controller is obtained. Three examples are given to show the effectiveness of the proposed methods.
基金Supported by National Natural Science Foundation of China (No.60574081)
文摘This paper proposes a robust fault detection and isolation (FDI) scheme for discrete time-delay system with disturbance. The FDI scheme can not only detect but also isolate the faults. The lifting method is exploited to transform the discrete time-delay system into the non-time-delay form. A generalized structured residual set is designed based on the unknown input observer (UIO). For each residual generator, one of the system input signals together with the corresponding actuator fault and the disturbance signals are treated as an unknown input term. The residual signals can not only be robust against the disturbance, but also be of the capacity to isolate the actuator faults. The proposed method has been verified by a numerical example.
基金supported by National Natural Science Foundation of China (No. 60874006)Natural Science Foundation of Hei-longjiang Province for Youth (No. QC2009C99)
文摘In this paper, global input-to-state stability （ISS） for discrete-time piecewise affine systems with time-delay are considered Piecewise quadratic ISS-Lyapunov functions are adopted. Both Lyapunov-Razumikhiu and Lyapunov-Krasovskii methods are used The theorems of Lyapunov-Razumikhin type and Lyapunov-Krasovskii type for piecewise affine systems with time-delay are shown respectively.
基金co-supported by the National Key R&D Program of China(No.2023YFB4704400)the Zhejiang Provincial Natural Science Foundation of China(No.LQ24F030012)the National Natural Science Foundation of China General Project(No.62373033)。
文摘A composite anti-disturbance predictive control strategy employing a Multi-dimensional Taylor Network(MTN)is presented for unmanned systems subject to time-delay and multi-source disturbances.First,the multi-source disturbances are addressed according to their specific characteristics as follows:(A)an MTN data-driven model,which is used for uncertainty description,is designed accompanied with the mechanism model to represent the unmanned systems;(B)an adaptive MTN filter is used to remove the influence of the internal disturbance;(C)an MTN disturbance observer is constructed to estimate and compensate for the influence of the external disturbance;(D)the Extended Kalman Filter(EKF)algorithm is utilized as the learning mechanism for MTNs.Second,to address the time-delay effect,a recursiveτstep-ahead MTN predictive model is designed utilizing recursive technology,aiming to mitigate the impact of time-delay,and the EKF algorithm is employed as its learning mechanism.Then,the MTN predictive control law is designed based on the quadratic performance index.By implementing the proposed composite controller to unmanned systems,simultaneous feedforward compensation and feedback suppression to the multi-source disturbances are conducted.Finally,the convergence of the MTN and the stability of the closed-loop system are established utilizing the Lyapunov theorem.Two exemplary applications of unmanned systems involving unmanned vehicle and rigid spacecraft are presented to validate the effectiveness of the proposed approach.
基金supported by the fund of Beijing Municipal Commission of Education(KM202210017001 and 22019821001)the Natural Science Foundation of Henan Province(222300420253).
文摘This paper discusses the design of event-triggered output-feedback controller for a class of nonlinear time-delay systems with multiple uncertainties. In sharp contrast to previous works, the considered systems possess two important characteristics: (i) The uncertain nonlinear terms meet the linearly unmeasurable-states dependent growth with the growth rate being an unknown function of the input and output. (ii) There exist input matching uncertainty and unknown measurement sensitivity. By introducing a single dynamic gain and employing a cleverly devised event-triggering mechanism (ETM), we design a new gain-based event-triggered output-feedback controller, which globally regulates all states of the considered systems and maintains global boundedness of the closed-loop system. Furthermore, the estimation of input matching uncertainty achieves convergence towards its actual value, and Zeno behavior does not happen. Two simulation examples including a practical one show that the proposed approach is effective.
基金Supported by National Natural Science Foundation of China （60872046） the Key Discipline Development Program of Beijing Municipal Commission （XK100080537）
基金supported in part by the National Natural Science Foundation of China(Grant No.12432001)Natural Science Foundation of Hunan Province(Grant Nos.2023JJ60527,2023JJ30152,and 2023JJ30259)the Natural Science Foundation of Changsha(KQ2202133).
文摘This study investigates the nonlinear resonance responses of suspended cables subjected to multi-frequency excitations and time-delayed feedback.Two specific combinations and simultaneous resonances are selected for detailed examination.Initially,utilizing Hamilton’s variational principle,a nonlinear vibration control model of suspended cables under multi-frequency excitations and longitudinal time-delayed velocity feedback is developed,and the Galerkin method is employed to obtain the discrete model.Subsequently,focusing solely on single-mode discretization,analytical solutions for the two simultaneous resonances are derived using the method of multiple scales.The frequency response equations are derived,and the stability analysis is presented for two simultaneous resonance cases.The results demonstrate that suspended cables exhibit complex nonlinearity under multi-frequency excitations.Multiple solutions under multi-frequency excitation can be distinguished through the frequency–response and the detuning-phase curves.By adjusting the control gain and time delay,the resonance range,response amplitude,and phase of suspended cables can be modified.
基金supported in part by the Key Program of National Natural Science Foundation of China(62033014)the Application Projects of Integrated Standardization and New Paradigm for Intelligent Manufacturing from the Ministry of Industry and Information Technology of China in 2016the Fundamental Research Funds for the Central Universities of Central South University(2021zzts0700).
文摘In the industrial roller kiln,the time-delay characteristic in heat transfer causes the temperature field to be affected by both the current and historical temperature states.It presents a poor control performance and brings a significant challenge to the process precise control.Considering high complexity of precise modeling,a data-driven time-delay optimal control method for temperature field of roller kiln is proposed based on a large amount of process data.First,the control challenges and problem description brought by time-delay are demonstrated,where the cost function for the time-delay partial differential equation system is constructed.To obtain the optimal control law,the policy iteration in adaptive dynamic programming is adopted to design the time-delay temperature field controller,and neural network is used for the critic network in policy iteration to approximate the optimal time-delay cost function.The closed-loop system stability is proved by designing the Lyapunov function which contains the time-delay information.Finally,through establishing the time-delay temperature field model for roller kiln,the effectiveness and convergence of the proposed method is verified and proved.
基金supported by Libyan Cultural Affair/London,Libya under Grant No.13840.
文摘Single-phase,non-isolated microinverters used in photovoltaic(PV)systems commonly encounter two persistent challenges:High-frequency leakage current and fluctuating power delivery.This paper presents a novel single-phase,non-isolated,multi-input microinverter topology with a common-ground structure that effectively eliminates ground leakage current without requiring additional active components.The proposed microinverter architecture integrates a dual-boost configuration and uses only four active switches.This is especially advantageous in terms of the component count,which is beneficial to enhance reliability,reduce cost,and simplify the overall system design.With one,two,or four PV inputs,it can operate without interruption under unbalanced voltage or partial shading and even if some inputs drop to zero.A tailored modulation scheme minimizes conduction losses while maintaining a stable direct-current(DC)-link voltage,and a decoupling capacitor efficiently absorbs the single-phase pulsating power,thus overcoming one major limitation in existing microinverter designs.By validating with a 1-kW GaN-based prototype,both the simulated and experimental results demonstrate its high efficiency,robustness,and practical suitability for cost-effective PV applications,with a peak efficiency value of 94.8%.
文摘This study investigates the impact of welding heat input on weldments of modified 9Cr-1Mo(P91)steel,a high-strength material that requires high-energy welding processes like submerged arc welding.In the as-welded condition,P91 steel welds primarily consist of untempered martensite,which transforms into tempered martensite during post-weld heat treatment(PWHT).Electron spectro-scopy analysis reveals the presence of M_(23)C_(6) and MX carbonitride precipitates at grain boundaries.Increasing the heat input leads to greater quantities of precipitates in the prior austenite grain boundaries,which can affect material properties.Weldment hardness profiles exhibit modest improvements,while ultimate tensile strength and toughness decrease with higher welding heat input,poten-tially due to the formation of a ferritic phase.Residual stress distributions are noticeably influenced by the welding heat input level.
基金supported by the National Natural Science Foundation of China(Grant No.51507106)China Postdoctoral Science Foundation(Grant No.2021M702371)。
文摘To ensure the safety of power energy transmission channel and mitigate the harm caused by galloping of iced transmission lines,the axial time-delay velocity feedback strategy is adopted to suppress the galloping.The par-tial differential equation of galloping with axial time-delay velocity feedback strategy is established based on the variational principle for Hamiltonian.Then,the partial differential equation of galloping is transformed into or-dinary differential equation based on normalization and the Galerkin method.The primary amplitude-frequency response equation,the first-order steady-state approximate solution,and the harmonic amplitude-frequency re-sponse equation are derived by the multiscale method.The impact of different parameters such as time-delay value,control coefficient,and amplitude of external excitation on the galloping response are analyzed.The am-plitude under the primary resonance exhibits periodicity as time-delay value varies.The amplitude diminishes with increased control coefficient and increases with external excitation.Comprehensive consideration of vari-ous influences of parameters on vibration characteristics is crucial when employing the axial time-delay velocity feedback strategy to suppress galloping.Therefore,to achieve the best vibration suppression effect,it is crucial to adjust the time-delay parameter for modifying the range and amplitude of the resonance zone.The conclusions obtained by this study are expected to advance the refinement of active control techniques for iced transmission lines,and may provide valuable insights for practical engineering applications.
基金supported by the National Natural Science Foundation of China(Nos.52471096 and 51971191).
文摘In this paper,Desulfovibrio vulgaris corrosion of X80 steel welded joint with different heat inputs was carefully investigated.The results confirmed that in the sterile medium,general corrosion rate and lo-calized corrosion susceptibility of heat affected zone(HAZ)were higher than those of weld zone(WZ)and base metal(BM).In the inoculated medium,the general corrosion rate of HAZ was still higher than that of WZ and BM.However,the number and depth of corrosion pits on WZ and BM surfaces,as well as the localized corrosion susceptibility,were much higher than those in HAZ,which was opposite to that in sterile environment,suggesting that the Desulfovibrio vulgaris corrosion of the welded joint was selective.With heat input increasing from 0.57 kJ/mm to 1.29 kJ/mm,general corrosion rate and localized corrosion susceptibility of HAZ and WZ simultaneously decreased in sterile or inoculated medium.In in-oculated medium,localized corrosion of HAZ decreased more sharply than weld zone.Within the range of heat inputs tested,the study discerned a positive correlation:higher heat inputs correlated with an enhanced corrosion resistance of welded joint,irrespective of environmental conditions being sterile or inoculated.The findings provide a solid basis for the welding parameter determination to steel pipelines in oil and gas transportation.
基金National Natural Science Foundation of China under Grant No.52478568National Key R&D Program of China under Grant Nos.2021YFC3100701 and 2022YFC3003503the Nature Science Foundation of Hubei Province under Grant No.2023AFA030。
文摘To analyze the correlation between the input energy parameters(V_(E))and typical intensity measures(IMs)of offshore ground motions,based on 273 earthquake events recorded by the K-NET in Japan,892 offshore ground motion records with moment magnitudes from 4.0 to 7.0 were used in this study.Residuals obtained through a ground motion model were calculated and analyzed for the correlation between V_(E) and amplitude,duration,frequency content and cumulative IMs.The results indicate that PGV and PGD have strong correlation with the V_(E)(T>0.2 s and T>0.4 s),the duration IMs have weakly negative correlation with the V_(E),Sd_(1) has a strong correlation with the V_(E) in the periods of T>0.4 s,T_(g) has a weak correlation with V_(E) and the cumulative IMs have strong correlation with the V_(E).The parametric predictive equations between typical IMs and V_(E) was proposed,and the differences between the prediction equations from the onshore ground motion records were compared.The differences in parametric predicted equations between offshore and onshore ground motions were confirmed in this study.Proposed correlation equations can be applied to offshore probabilistic seismic hazard analysis and the selection of ground motion records by generalized conditional intensity measures.
基金supported by the National Natural Science Foundation of China(Grant Nos.62376105,12101208,and 61906072)the Fundamental Research Funds for the Central Universities(Grant No.2662022XXQD001).
文摘This paper proposes a novel multivalued recurrent neural network model driven by external inputs,along with two innovative learning algorithms.By incorporating a multivalued activation function,the proposed model can achieve multivalued many-to-one associative memory,and the newly developed algorithms enable effective storage of many-to-one patterns in the coefficient matrix while maintaining the indispensability of inputs in many-to-one associative memory.The proposed learning algorithm addresses a critical limitation of existing models which fail to ensure completely erroneous outputs when facing partial input missing in many-to-one associative memory tasks.The methodology is rigorously derived through theoretical analysis,incorporating comprehensive verification of both the existence and global exponential stability of equilibrium points.Demonstrative examples are provided in the paper to show the effectiveness of the proposed theory.
基金National Natural Science Foundation of China(62373102)Jiangsu Natural Science Foundation(BK20221455)Anhui Provincial Key Research and Development Project(2022i01020013)。
文摘Enhancing the stability and performance of practical control systems in the presence of nonlinearity,time delay,and uncertainty remains a significant challenge.Particularly,a class of strict-feedback nonlinear uncertain systems characterized by unknown control directions and time-varying input delay lacks comprehensive solutions.In this paper,we propose an observerbased adaptive tracking controller to address this gap.Neural networks are utilized to handle uncertainty,and a unique coordinate transformation is employed to untangle the coupling between input delay and unknown control directions.Subsequently,a new auxiliary signal counters the impact of time-varying input delay,while a Nussbaum function is introduced to solve the problem of unknown control directions.The leverage of an advanced dynamic surface control technique avoids the“complexity explosion”and reduces boundary layer errors.Synthesizing these techniques ensures that all the closed-loop signals are semi-globally uniformly ultimately bounded(SGUUB),and the tracking error converges to a small region around the origin by selecting suitable parameters.Simulation examples are provided to demonstrate the feasibility of the proposed approach.
基金supported in part by the National Key Research and Development Program of China under Grant 2023YFA1011803in part by Natural Science Foundation of Chongqing,China under Grant CSTB2023NSCQ-MSX0588+2 种基金in part by the Fundamental Research Funds for the Central Universities,China under Grant 2023CDJKYJH047in part by the National Natural Science Foundation of China under Grant 62273064,Grant 61991400,Grant 61991403,Grant 61933012,Grant 62250710167,Grant 62203078in part by Innovation Support Program for International Students Returning to China under Grant cx2022016.
文摘This paper addresses the lane-keeping control problem for autonomous ground vehicles subject to input saturation and uncertain system parameters.An enhanced adaptive terminal sliding mode based prescribed performance control scheme is proposed,which enables the lateral position error of the vehicle to be kept within the prescribed performance boundaries all the time.This is achieved by firstly introducing an improved performance function into the controller design such that the stringent initial condition requirements can be relaxed,which further allows the global prescribed performance control result,and then,developing a multivariable adaptive terminal sliding mode based controller such that both input saturation and parameter uncertainties are handled effectively,which further ensures the robust lane-keeping control.Finally,the proposed control strategy is validated through numerical simulations,demonstrating its effectiveness.
基金financially supported by the National Natural Science Foundation of China(52474361).
文摘The effects of Ti/N ratio on the number densities of nano particles,the size of the prior austenite grain(PAG)and the toughness of the heat-affected zone(HAZ)of Mg-deoxidized steels were studied after high heat input welding of 400 kJ/cm.With increasing the Ti/N ratio from 2.7 to 5.7,the cuboid nano-sized particles are formed,and their number density increases.The area fractions of ductile intragranular acicular ferrites(IAFs)have the highest value and the area fractions of brittle microstructures of ferrite side plates and upper bainites have the lowest value in TN30 steel.With the Ti/N ratio of about 3.0,the HAZ of steel plate has the best low-temperature toughness.With increasing the Ti/N ratio from 2.7 to 5.7,the PAG sizes after the high-temperature laser scanning confocal microscopy observation decrease linearly with increasing the number densities of nano-sized particles.The PAG size of TN30 steel is between 100 and 150μm,which is conducive to the nucleation of IAFs.
基金supported in part by the National Natural Science Foundation of China(62325302,62203076,62103065,62033001,62303079)the China Postdoctoral Science Foundation(2021M700584)+1 种基金the Natural Science Foundation of Chongqing,China(cstc2020jcyj-zdxmX0014)the Program of Shanghai Academic/Technology Research Leader(21XD1421400).
文摘Unknown time-varying periodic disturbances and input delays can degrade control performance and even lead to system instability.This paper presents a novel direct adaptive output feedback controller based on the internal model principle(IMP)to compensate for the unknown time-varying periodic disturbance in input delay systems.To reduce the design difficulty of the controller,the input delay system is equivalent to an input delay-free system by constructing stable auxiliary systems.Next,all the stabilizing controllers of the input delay system are derived by using the Youla parameterization method.Based on the IMP,an interpolation condition to completely compensate for periodic disturbances is formulated.Then,to compensate for the unknown time-varying periodic disturbance,a parameter adaptive algorithm is designed to update the Q-parameters online.The convergence of adaptive algorithms is analyzed by the Lyapunov function theory.Simulation and experimental results validated the effectiveness of the proposed method.
