The global distributions of eight principal tidal constituents, M2, S2, K1, O1, N2, K2, P1, and Q1, are derived using TOPEX/Poseidon and JASON-1（T/P-J） satellite altimeter data for 16 a. The intercomparison of the d...The global distributions of eight principal tidal constituents, M2, S2, K1, O1, N2, K2, P1, and Q1, are derived using TOPEX/Poseidon and JASON-1（T/P-J） satellite altimeter data for 16 a. The intercomparison of the derived harmonics at 7000 subsatellite track crossover points shows that the root mean square （RMS） values of the tidal height differences of the above eight constituents range from 1.19 cm to 2.67 cm, with an average of about 2 cm. The RMS values of the tidal height differences between T/P-J solutions and the harmonics from ground measurements at 152 tidal gauge stations for the above constituents range from 0.34 cm to 1.08 cm, and the relative deviations range from 0.031 to 0.211. The root sum square of the RMS differences of these eight constituents is 2.12 cm, showing the improvement of the present model over the existing global ocean tidal models. Based on the obtained tidal model the global ocean tidal energetics is studied and the global distribution of the tidal power input density by tide-generating force of each constituent is calculated, showing that the power input source regions of semidiurnal tides are mainly concentrated in the tropical belt between 30S and 30N, while the power input source regions of diurnal tides are mainly concentrated off the tropic oceans. The global energy dissipation rates of the M2, S2, K1, O1, N2, P1, K2 and Q1 tides are 2.424, 0.401, 0.334, 0.160, 0.113, 0.035, 0.030 and 0.006 TW, respectively. The total global tidal dissipation rate of these eight constituents amounts to 3.5 TW.展开更多
Study results of low temperature effects on the strength index and specific power input into rock failure are presented.It has been experimentally determined that within the range of-5 °С to-15 °С,there is...Study results of low temperature effects on the strength index and specific power input into rock failure are presented.It has been experimentally determined that within the range of-5 °С to-15 °С,there is a local minimum at which the compression strength and specific power input into failure of some rocks are 10%-50% lower than those at positive temperatures.展开更多
A method for the optimal fiber input power determination is presented by employing the variation characteristics of signal to noise ratio(SNR) in spontaneous Brillouin-scattering-based sensing system. And a heterodyne...A method for the optimal fiber input power determination is presented by employing the variation characteristics of signal to noise ratio(SNR) in spontaneous Brillouin-scattering-based sensing system. And a heterodyne detection system is constructed for measuring the Brillouin scattering spectra with different fiber input powers. The Brillouin spectrum width and system SNR can be simultaneously measured from these spectra, and the optimal fiber input power can be obtained from such information. In the experiment, for 48.8-km-long standard single-mode fiber(SSMF), the optimal fiber input power values are all approximately 0 dBm obtained by the maximum SNR position for different local oscillator power values and average times.展开更多
Both auto-power spectrum and cross-power spectrum need to be controlled in multi-input multi-output （MIMO） random vibration test. During the control process with the difference control algorithm （DCA）, a lower tri...Both auto-power spectrum and cross-power spectrum need to be controlled in multi-input multi-output （MIMO） random vibration test. During the control process with the difference control algorithm （DCA）, a lower triangular matrix is derived from Cholesky decomposition of a reference spectrum matrix. The diagonal elements of the lower triangular matrix （DELTM） may become negative. These negative values have no meaning in physical significance and can cause divergence of auto-power spectrum control. A proportional root mean square control algorithm （PRMSCA） provides another method to avoid the divergence caused by negative values of DELTM, but PRMSCA cannot control the cross-power spectrum. A new control algorithm named matrix power control algorithm （MPCA） is proposed in the paper. MPCA can guarantee that DELTM is always positive in the auto-power spectrum control. MPCA can also control the cross-power spectrum. After these three control algorithms are analyzed, three-input three-output random vibration control tests are implemented on a three-axis vibration shaker. The results show the validity of the proposed MPCA.展开更多
In high voltage input DC-DC converter, auxiliary winding of isolation transformer is usually used to supply power for control circuit. Due to the wide-range of input voltage, the variable output voltage of auxiliary w...In high voltage input DC-DC converter, auxiliary winding of isolation transformer is usually used to supply power for control circuit. Due to the wide-range of input voltage, the variable output voltage of auxiliary winding will cause a series of problems, such as variable drive pulse amplitude, increased driver switching devices loss and drive transformer core saturation. This paper analyzes the influence of variable output voltage of auxiliary winding in detail. A novel method is proposed to solve the problem of large variation range of auxiliary winding output voltage, which is adding a buck converter between the auxiliary winding and the control circuit. A dual switch forward convert has been designed with 300 V - 800 V input and 24 V/5 A output. The results show that this method is effective by comparing the different results of using buck converter or not.展开更多
Input power is an important indicator for the safety testing of electrical and electronic products.Smart toilets have been frequently detected that the actual input power is inconsistent with the nominal power.Researc...Input power is an important indicator for the safety testing of electrical and electronic products.Smart toilets have been frequently detected that the actual input power is inconsistent with the nominal power.Research and analysis show that the accuracy of the input power measurement results of the smart toilet mainly depends on the temperature control principle and power test method of the product.This article mainly discusses the characteristics of product temperature control,the testing method of mean and peak power and its characteristics,which will provide reference for the input power test of the smart toilet,and will improve the accuracy of power measurement.展开更多
The study focuses on estimating the input power of a power plant from available data, using the theoretical inverter efficiency as the key parameter. The paper addresses the problem of missing data in power generation...The study focuses on estimating the input power of a power plant from available data, using the theoretical inverter efficiency as the key parameter. The paper addresses the problem of missing data in power generation systems and proposes an approach based on the efficiency formula widely documented in the literature. In the absence of input data, this method makes it possible to estimate the plant’s input power using data extracted from the site, in particular that provided by the Ministry of the Environment. The importance of this study lies in the need to accurately determine the input power in order to assess the overall performance of the energy system.展开更多
A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for...A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for use in fiber optics communication systems.The fabricated device exhibits low loss and good coupling uniformity.The excess loss is lower than 0 8dB,and the uniformity is 0 45dB at the wavelength of 1550nm.Moreover,the polarization dependent loss is lower than 0 7dB at 1550nm.The device size is only 2mm×10mm.展开更多
The driving voltage and current signals of piezoceramic transducer (PZT) were measured directly by designing circuits from ultrasonic generator and using a data acquisition software system. The input impedance and pow...The driving voltage and current signals of piezoceramic transducer (PZT) were measured directly by designing circuits from ultrasonic generator and using a data acquisition software system. The input impedance and power of PZT were investigated by using root mean square (RMS) calculation. The vibration driven by high frequency was tested by laser Doppler vibrometer (PSV-400-M2). And the thermosonic bonding features were observed by scanning electron microscope (JSM-6360LV). The results show that the input power of bonding is lower than that of no load. The input impedance of bonding is greater than that of no load. Nonlinear phase, plastic flow and expansion period, and strengthening bonding process are shown in the impedance and power curves. The ultrasonic power is in direct proportion to the vibration displacement driven by the power, and greater displacements driven by high power (>5 W) result in welding failure phenomena, such as crack, break, and peeling off in wedge bonding. For thermosonic flip chip bonding, the high power decreases position precision of bonding or results in slippage and rotation phenomena of bumps. To improve reliability and precision of thermosonic bonding, the low ultrasonic power (about 1-5 W) should be chosen.展开更多
In this paper,the channel capacity of the multiple-input multiple-output(MIMO)visible light communication(VLC)system is investigated under the peak,average optical and electrical power constraints.Finding the channel ...In this paper,the channel capacity of the multiple-input multiple-output(MIMO)visible light communication(VLC)system is investigated under the peak,average optical and electrical power constraints.Finding the channel capacity of MIMO VLC is shown to be a mixed integer programming problem.To address this open problem,we propose an inexact gradient projection method to find the channel capacity-achieving discrete input distribution and the channel capacity of MIMO VLC.Also we derive both upper and lower bounds of the capacity of MIMO VLC with the closed-form expressions.Furthermore,by considering practical discrete constellation inputs,we develop the optimal power allocation scheme to maximize transmission rate of MIMO VLC system.Simulation results show that more discrete points are needed to achieve the channel capacity as SNR increases.Both the upper and lower bounds of channel capacity are tight at low SNR region.In addition,comparing the equal power allocation,the proposed power allocation scheme can significantly increase the rate for the low-order modulation inputs.展开更多
Memristor is a newly found fourth circuit element for the next generation emerging nonvolatile memory technology. In this paper, design of new type of nonvolatile static random access memory cell is proposed by using ...Memristor is a newly found fourth circuit element for the next generation emerging nonvolatile memory technology. In this paper, design of new type of nonvolatile static random access memory cell is proposed by using a combination of memristor and complemented metal oxide semiconductor. Biolek memristor model and CMOS 180 nm technology are used to form a single cell. By introducing distinct binary logic to avoid safety margin is left for each binary logic output and enables better read/write data integrity. The total power consumption reduces from 0.407 mw (milli-watt) to 0.127 mw which is less than existing memristor based memory cell of the same CMOS technology. Read and write time is also significantly reduced. However, write time is higher than conventional 6T SRAM cell and can be reduced by increasing motion of electron in the memristor. The change of the memristor state is shown by applying piecewise linear input voltage.展开更多
Wind input parameterizations proposed by Jeffreys, Sverdrup and Munk, and Plant are analyzed. It is found by analogy that the similarity of integrals of the three wind input parameterizations exists. Wave breaking dis...Wind input parameterizations proposed by Jeffreys, Sverdrup and Munk, and Plant are analyzed. It is found by analogy that the similarity of integrals of the three wind input parameterizations exists. Wave breaking dissipation parameterizations proposed by Tsikunov, Hasselmann, and Phillips are also analyzed. Likewise it is found by analogy that the similarity of integrals of the three dissipation parameterizations exists. The similarities of wind input and dissipation are applied to the investigation of the fetch-limited growth of wind waves, together with the 3/2 power law presented by Toba. Some semi-empirical formulas concerning the growth of wave height and period with fetch are presented. The results from the formulas are in good agreement with previous field observations.展开更多
With targets of cost reduction per bit and high energy efficiency,5G and beyond call for innovation in the mmWave transmitter architecture and the power amplifier(PA)circuit.To illustrate these points,this paper first...With targets of cost reduction per bit and high energy efficiency,5G and beyond call for innovation in the mmWave transmitter architecture and the power amplifier(PA)circuit.To illustrate these points,this paper firstly explains the benefits and design implications of the hybrid beamforming structure in terms of the mmWave spectrum characteristics,energy efficiency,data rate,communication capacity,coverage and implementation technology choices.Then after reviewing the techniques to improve the power amplifier(PA)output power and efficiency,the design considerations and test results of 60 GHz and 90 GHz mmWave PAs in bulk complementary metal oxide semiconductor(CMOS)process are shown.展开更多
To realize effective utilization of renewable energy sources,a novel polymorphic topology with hybrid control strategy based LLC resonant converter was analyzed and designed in this paper.By combining the merits of a ...To realize effective utilization of renewable energy sources,a novel polymorphic topology with hybrid control strategy based LLC resonant converter was analyzed and designed in this paper.By combining the merits of a full bridge LLC resonant converter,three-level half bridge LLC resonant converter,and variable frequency control mode,the converter realizes an intelligent estimation of input voltage by automatically changing its internal cir-cuit topology.Under this control strategy,different input voltages determine different operation modes.This is achieved in full bridge LLC mode when the input voltage is low.If the input voltage rises to a certain level,it operates in three-level half bridge LLC mode.These switches are digital and entirely carried out by the DSP(Digi-tal Signal Processor),which means that an auxiliary circuit is unnecessary,where a simple strategy of software modification can be utilized.Experimental results of a 500W prototype with 100V~600V input voltage and full load efficiency of up to 92%are developed to verify feasibility and practicability.This type of converter is suitable for applications with an ultra-wide input voltage range,such as wind turbines,photovoltaic generators,bioenergy,and other renewable energy sources.展开更多
Multi input and multi output converters are becoming popular because they are cost effective and compact. This paper proposes a multi input multi output converter for Grid-Solar power integration for uninterrupted pow...Multi input and multi output converters are becoming popular because they are cost effective and compact. This paper proposes a multi input multi output converter for Grid-Solar power integration for uninterrupted power supply. The proposed converter uses four winding transformer with two primary windings and two secondary windings. The grid supply is connected to the first winding of transformer through rectifier-inverter for controlled power transfer. The solar energy is inverted and applied to the second winding of primary. Two output ports are considered. The circuit is designed to get zero current switching during turn-off and zero voltage switching during turn-on to alleviate the switching losses. The simulation results for the proposed configuration are presented in this paper.展开更多
Dual-hop cooperative Multiple-Input Multiple-Output (MIMO) network with multi-relay cooperative communication is introduced. Power allocation problem with Amplify-and-Forward (AF) and Selective Decode-and-Forward (SDF...Dual-hop cooperative Multiple-Input Multiple-Output (MIMO) network with multi-relay cooperative communication is introduced. Power allocation problem with Amplify-and-Forward (AF) and Selective Decode-and-Forward (SDF) strategies in multi-node scenario are formulated and solved respectively. Optimal power allocation schemes that maximize system capacity with AF strategy are presented. In addition, optimal power allocation methods that minimize asymptotic Symbol Error Rate (SER) with SDF cooperative protocol in multi-node scenario are also proposed. Furthermore, performance comparisons are provided in terms of system capacity and approximate SER. Numerical and simulation results confirm our theoretical analysis. It is revealed that, maximum system capacity could be obtained when powers are allocated optimally with AF protocol, while minimization of system's SER could also be achieved with optimum power allocation in SDF strategy. In multi-node scenario, those optimal power allocation algorithms are superior to conventional equal power allocation schemes.展开更多
基金The National Natural Science Foundation of China under contract No. 40676009 and 40606006the Basic Research Project of Qingdao Science and Technology Program under contract No. 11-1-4-98-jch
文摘The global distributions of eight principal tidal constituents, M2, S2, K1, O1, N2, K2, P1, and Q1, are derived using TOPEX/Poseidon and JASON-1（T/P-J） satellite altimeter data for 16 a. The intercomparison of the derived harmonics at 7000 subsatellite track crossover points shows that the root mean square （RMS） values of the tidal height differences of the above eight constituents range from 1.19 cm to 2.67 cm, with an average of about 2 cm. The RMS values of the tidal height differences between T/P-J solutions and the harmonics from ground measurements at 152 tidal gauge stations for the above constituents range from 0.34 cm to 1.08 cm, and the relative deviations range from 0.031 to 0.211. The root sum square of the RMS differences of these eight constituents is 2.12 cm, showing the improvement of the present model over the existing global ocean tidal models. Based on the obtained tidal model the global ocean tidal energetics is studied and the global distribution of the tidal power input density by tide-generating force of each constituent is calculated, showing that the power input source regions of semidiurnal tides are mainly concentrated in the tropical belt between 30S and 30N, while the power input source regions of diurnal tides are mainly concentrated off the tropic oceans. The global energy dissipation rates of the M2, S2, K1, O1, N2, P1, K2 and Q1 tides are 2.424, 0.401, 0.334, 0.160, 0.113, 0.035, 0.030 and 0.006 TW, respectively. The total global tidal dissipation rate of these eight constituents amounts to 3.5 TW.
文摘Study results of low temperature effects on the strength index and specific power input into rock failure are presented.It has been experimentally determined that within the range of-5 °С to-15 °С,there is a local minimum at which the compression strength and specific power input into failure of some rocks are 10%-50% lower than those at positive temperatures.
基金supported by the National Natural Science Foundation of China(No.61377088)the Natural Science Foundation of Hebei Province of China(Nos.E2015502053 and F2014502098)
文摘A method for the optimal fiber input power determination is presented by employing the variation characteristics of signal to noise ratio(SNR) in spontaneous Brillouin-scattering-based sensing system. And a heterodyne detection system is constructed for measuring the Brillouin scattering spectra with different fiber input powers. The Brillouin spectrum width and system SNR can be simultaneously measured from these spectra, and the optimal fiber input power can be obtained from such information. In the experiment, for 48.8-km-long standard single-mode fiber(SSMF), the optimal fiber input power values are all approximately 0 dBm obtained by the maximum SNR position for different local oscillator power values and average times.
基金National Natural Science Foundation of China （10972104） The Fundamental Research Funds for NUAA（NS2010007）
文摘Both auto-power spectrum and cross-power spectrum need to be controlled in multi-input multi-output （MIMO） random vibration test. During the control process with the difference control algorithm （DCA）, a lower triangular matrix is derived from Cholesky decomposition of a reference spectrum matrix. The diagonal elements of the lower triangular matrix （DELTM） may become negative. These negative values have no meaning in physical significance and can cause divergence of auto-power spectrum control. A proportional root mean square control algorithm （PRMSCA） provides another method to avoid the divergence caused by negative values of DELTM, but PRMSCA cannot control the cross-power spectrum. A new control algorithm named matrix power control algorithm （MPCA） is proposed in the paper. MPCA can guarantee that DELTM is always positive in the auto-power spectrum control. MPCA can also control the cross-power spectrum. After these three control algorithms are analyzed, three-input three-output random vibration control tests are implemented on a three-axis vibration shaker. The results show the validity of the proposed MPCA.
文摘In high voltage input DC-DC converter, auxiliary winding of isolation transformer is usually used to supply power for control circuit. Due to the wide-range of input voltage, the variable output voltage of auxiliary winding will cause a series of problems, such as variable drive pulse amplitude, increased driver switching devices loss and drive transformer core saturation. This paper analyzes the influence of variable output voltage of auxiliary winding in detail. A novel method is proposed to solve the problem of large variation range of auxiliary winding output voltage, which is adding a buck converter between the auxiliary winding and the control circuit. A dual switch forward convert has been designed with 300 V - 800 V input and 24 V/5 A output. The results show that this method is effective by comparing the different results of using buck converter or not.
文摘Input power is an important indicator for the safety testing of electrical and electronic products.Smart toilets have been frequently detected that the actual input power is inconsistent with the nominal power.Research and analysis show that the accuracy of the input power measurement results of the smart toilet mainly depends on the temperature control principle and power test method of the product.This article mainly discusses the characteristics of product temperature control,the testing method of mean and peak power and its characteristics,which will provide reference for the input power test of the smart toilet,and will improve the accuracy of power measurement.
文摘The study focuses on estimating the input power of a power plant from available data, using the theoretical inverter efficiency as the key parameter. The paper addresses the problem of missing data in power generation systems and proposes an approach based on the efficiency formula widely documented in the literature. In the absence of input data, this method makes it possible to estimate the plant’s input power using data extracted from the site, in particular that provided by the Ministry of the Environment. The importance of this study lies in the need to accurately determine the input power in order to assess the overall performance of the energy system.
文摘A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for use in fiber optics communication systems.The fabricated device exhibits low loss and good coupling uniformity.The excess loss is lower than 0 8dB,and the uniformity is 0 45dB at the wavelength of 1550nm.Moreover,the polarization dependent loss is lower than 0 7dB at 1550nm.The device size is only 2mm×10mm.
基金Project(50675227) supported by the National Natural Science Foundation of ChinaProject(07JJ3091) supported by Natural Science Foundation of Hunan Province, China+1 种基金Project(2007001) supported by the State Key Laboratory of Digital Manufacturing Equipment and TechnologyProject(2009CB724203) supported by the Major State Basic Research Development Program of China
文摘The driving voltage and current signals of piezoceramic transducer (PZT) were measured directly by designing circuits from ultrasonic generator and using a data acquisition software system. The input impedance and power of PZT were investigated by using root mean square (RMS) calculation. The vibration driven by high frequency was tested by laser Doppler vibrometer (PSV-400-M2). And the thermosonic bonding features were observed by scanning electron microscope (JSM-6360LV). The results show that the input power of bonding is lower than that of no load. The input impedance of bonding is greater than that of no load. Nonlinear phase, plastic flow and expansion period, and strengthening bonding process are shown in the impedance and power curves. The ultrasonic power is in direct proportion to the vibration displacement driven by the power, and greater displacements driven by high power (>5 W) result in welding failure phenomena, such as crack, break, and peeling off in wedge bonding. For thermosonic flip chip bonding, the high power decreases position precision of bonding or results in slippage and rotation phenomena of bumps. To improve reliability and precision of thermosonic bonding, the low ultrasonic power (about 1-5 W) should be chosen.
基金supported by the Graduate Innovation Program of China University of Mining and Technology (2022WLKXJ016)in part by the Postgraduate Research&Practice Innovation Program of Jiangsu Province (KYCX222549)+3 种基金supported by Shaanxi Provincial Natural Science Foundation of China (2023-JC-YB-510)the Fundamental Research Funds for the Central Universities,CHD (300102322103)supported in part by Natural Science Foundation of Jiangsu Province (BK20200488)supported in part by Challenge Cup National Student Curricular Academic Science and Technology Works Competition (DCXM202212)。
文摘In this paper,the channel capacity of the multiple-input multiple-output(MIMO)visible light communication(VLC)system is investigated under the peak,average optical and electrical power constraints.Finding the channel capacity of MIMO VLC is shown to be a mixed integer programming problem.To address this open problem,we propose an inexact gradient projection method to find the channel capacity-achieving discrete input distribution and the channel capacity of MIMO VLC.Also we derive both upper and lower bounds of the capacity of MIMO VLC with the closed-form expressions.Furthermore,by considering practical discrete constellation inputs,we develop the optimal power allocation scheme to maximize transmission rate of MIMO VLC system.Simulation results show that more discrete points are needed to achieve the channel capacity as SNR increases.Both the upper and lower bounds of channel capacity are tight at low SNR region.In addition,comparing the equal power allocation,the proposed power allocation scheme can significantly increase the rate for the low-order modulation inputs.
文摘Memristor is a newly found fourth circuit element for the next generation emerging nonvolatile memory technology. In this paper, design of new type of nonvolatile static random access memory cell is proposed by using a combination of memristor and complemented metal oxide semiconductor. Biolek memristor model and CMOS 180 nm technology are used to form a single cell. By introducing distinct binary logic to avoid safety margin is left for each binary logic output and enables better read/write data integrity. The total power consumption reduces from 0.407 mw (milli-watt) to 0.127 mw which is less than existing memristor based memory cell of the same CMOS technology. Read and write time is also significantly reduced. However, write time is higher than conventional 6T SRAM cell and can be reduced by increasing motion of electron in the memristor. The change of the memristor state is shown by applying piecewise linear input voltage.
文摘Wind input parameterizations proposed by Jeffreys, Sverdrup and Munk, and Plant are analyzed. It is found by analogy that the similarity of integrals of the three wind input parameterizations exists. Wave breaking dissipation parameterizations proposed by Tsikunov, Hasselmann, and Phillips are also analyzed. Likewise it is found by analogy that the similarity of integrals of the three dissipation parameterizations exists. The similarities of wind input and dissipation are applied to the investigation of the fetch-limited growth of wind waves, together with the 3/2 power law presented by Toba. Some semi-empirical formulas concerning the growth of wave height and period with fetch are presented. The results from the formulas are in good agreement with previous field observations.
基金supported by the National Natural Science Foundations of China (Nos. 61306030, 61674037)the National Key R&D Program of China (Nos.2016YFC0800400, 2018YFE0205900)the National Science and Technology Major Project (No. 2018ZX03001008)
文摘With targets of cost reduction per bit and high energy efficiency,5G and beyond call for innovation in the mmWave transmitter architecture and the power amplifier(PA)circuit.To illustrate these points,this paper firstly explains the benefits and design implications of the hybrid beamforming structure in terms of the mmWave spectrum characteristics,energy efficiency,data rate,communication capacity,coverage and implementation technology choices.Then after reviewing the techniques to improve the power amplifier(PA)output power and efficiency,the design considerations and test results of 60 GHz and 90 GHz mmWave PAs in bulk complementary metal oxide semiconductor(CMOS)process are shown.
文摘To realize effective utilization of renewable energy sources,a novel polymorphic topology with hybrid control strategy based LLC resonant converter was analyzed and designed in this paper.By combining the merits of a full bridge LLC resonant converter,three-level half bridge LLC resonant converter,and variable frequency control mode,the converter realizes an intelligent estimation of input voltage by automatically changing its internal cir-cuit topology.Under this control strategy,different input voltages determine different operation modes.This is achieved in full bridge LLC mode when the input voltage is low.If the input voltage rises to a certain level,it operates in three-level half bridge LLC mode.These switches are digital and entirely carried out by the DSP(Digi-tal Signal Processor),which means that an auxiliary circuit is unnecessary,where a simple strategy of software modification can be utilized.Experimental results of a 500W prototype with 100V~600V input voltage and full load efficiency of up to 92%are developed to verify feasibility and practicability.This type of converter is suitable for applications with an ultra-wide input voltage range,such as wind turbines,photovoltaic generators,bioenergy,and other renewable energy sources.
文摘Multi input and multi output converters are becoming popular because they are cost effective and compact. This paper proposes a multi input multi output converter for Grid-Solar power integration for uninterrupted power supply. The proposed converter uses four winding transformer with two primary windings and two secondary windings. The grid supply is connected to the first winding of transformer through rectifier-inverter for controlled power transfer. The solar energy is inverted and applied to the second winding of primary. Two output ports are considered. The circuit is designed to get zero current switching during turn-off and zero voltage switching during turn-on to alleviate the switching losses. The simulation results for the proposed configuration are presented in this paper.
基金Supported by National Natural Science Foundation of China (NSFC) (No. 60972039)National High Technology Research and Development Program of China (No.2009AA01Z241)Innovation Program for Ph.D. and Postgraduate Candidates in Jiangsu Province (No.CX09B_147Z)
文摘Dual-hop cooperative Multiple-Input Multiple-Output (MIMO) network with multi-relay cooperative communication is introduced. Power allocation problem with Amplify-and-Forward (AF) and Selective Decode-and-Forward (SDF) strategies in multi-node scenario are formulated and solved respectively. Optimal power allocation schemes that maximize system capacity with AF strategy are presented. In addition, optimal power allocation methods that minimize asymptotic Symbol Error Rate (SER) with SDF cooperative protocol in multi-node scenario are also proposed. Furthermore, performance comparisons are provided in terms of system capacity and approximate SER. Numerical and simulation results confirm our theoretical analysis. It is revealed that, maximum system capacity could be obtained when powers are allocated optimally with AF protocol, while minimization of system's SER could also be achieved with optimum power allocation in SDF strategy. In multi-node scenario, those optimal power allocation algorithms are superior to conventional equal power allocation schemes.
